Install Process

I don't know how long this has beeng going on, but what moron decided it was a good idea to piggyback McAfee security scans by default during the install process? Sure, make it an option, but don't make it the default one. Don't waste my time. I understand marketing, but packaging two disparate products together in the hope that a user will accidentally install something is unacceptable. Adobe is a (semi) respectable company--act like it.

I found the problem. So I guess disregard this message. :)
The problem was that sendmail was on using the smtp port. Go figure.

Similar Messages

The dmg files have downloaded to the wrong folder - not finished with the install process

The dmg files have downloaded to the wrong folder - I am at the part of the download/install process where the "Welcome" screen appears asking for me to agree to the license agreement. Somewhere on your site, I read that they should NOT go to the applications folder but to the "Users" folder. Can/should I move/drag the folder with the dmg files into the "Users" folder"? If so, before or after I complete the install? I am running MAC OSX 10.7.4 on a MAC Mini.
Also, when the trial period is over, I will use the license number for the purchased software disks, should the dmg's/folders then be moved to the application folder or stay in the "users" section? I have Purvhased Adobe Photoshop Elements 10 and Adobe Premiere Elements 10, but somewhere on your site it was suggested to download them instead and use the license code at the appropiate time. If someone can help with these questions, I would appreciate it. Thank you

Hi,
In the Welcome screen, you can accept the license agreement and can go ahead with the installation. You will be asked for the serial number. If you don't have one, install it as a trial application. By default, it's installed in the Applications folder. However, you can change the installation folder in the third screen, if you have a reason. Please see the screenshot below:
After installing, you can't move application to a different directory by dragging. You need to uninstall and install it again in the folder of your choice.
Thanks,
Sunil

I have a windows 7 64x SP1 and every time I install iTunes 12 I get this message when I try to ponen it:"This copy of Itunes is damaged and it has not been correctly installe. Please, install iTunes again.(-42404)". The instalation process runs smoot

I have a windows 7 64x SP1.
Every time I install iTunes 12 I get this message when I try to open it:"This copy of iTunes is damaged and it has not been correctly installed. Please, install iTunes again.(-42404)".
The instalation process runs smoothly without any error message and iTunes has been installed in my computer before. The problem started with the update no. 12. Any idea what's going on? Thank you

if itunes will not run, you probably have mangled windows badly
one feature of windows 8 is the refresh that saves libraries,
because you are using windows 7, you will need to backup all files to another storage device

So whenever I try to download the newest itunes file it won't let me finish the install process because I'm missing the "Itunes.msi" file whatever that is and I've done some searches but I cannot find the file. Anyone know what to do?

So whenever I try to download the newest itunes file it won't let me finish the install process because I'm missing the "Itunes.msi" file whatever that is and I've done some searches but I cannot find the file. Anyone know what to do?

you can try this thread maybe? https://discussions.apple.com/message/16217061#16217061

Windows 7 Install wont continue after first restart in Install process

Hi,
I am trying to install Windows 7 Build 7000 on my computer. But it does
not seem to want to continue install after the first restart during the Install Process.
Here is what I did:
I put in the dvd, and boot my computer from the DVD. I set the DVD to
be the only boot device in the BIOS. The installer starts. I go through
all the steps needed for install. It comes to the first restart, and
the computer restarts. After a lot of waiting, the computer brings up
the first step to the install. Where it shows the "Install Now" Button.
(The install basically starts from step One again).
Not sure what I did wrong through all this. My computer Specs are AMD
6400 2.20Ghz, 2 Gigs of Ram, Clean 40 Gig IDE Hard drive, on Different
IDE channel then the DVD Drive (Not sure if that is important). Linksys
Wireless Add in Card, BFG Nvidia GeForce 9600 GT. (From what I know, my computer meets all the requirements)
So if someone could help me get Windows 7 up and running, that would be great!
Thanks in advance,
Musick Man
EDIT:
I forgot to say that I tried to install Windows 7 off a virtual drive
from within XP before I tried to install from a CD, but that didnt seem to work after the first restart
also. It did put the windows boot loader on my computer, but didnt
finish the Windows 7 Install. I have a feeling that it tried to
over-right my Windows XP install, because the boot loader only comes up
when my XP drive is plugged in. When I tried installing 7 with the CD,
I had my XP drive unplugged. So if 7 tried to install on my XP drive,
how can I get the files off it, that I dont want on it anymore, and
install Windows 7 on my other drive, in a XP and 7 Duel-boot.

Hi Musick_Man:
    If you want to install Win7 in a dual-boot with your XP O.S. you should leave the XP drive connected while installing Win7. If you just added the IDE hard drive you want to install Win7 on you need to make sure that that drive is jumpered as Master on the back and that the DVD drive is jumpered as Slave if they are on the same cable. The other option is to jumper both drives as "cable select" and make sure that the hard drive is on the topmost connector on the cable. If the DVD drive and the 40 GB hard drive are on separate cables they should each be jumpered as "Master" and use the top connection on each cable. You didn't mention if your XP drive is an IDE drive or not.....if it is on the same cable with the drive you intend to install Win7 on, you need to jumper one as master and one as slave or jumper both to "cable select". Hopefully your bios is already set to IDE/Native Mode already because if it is set to Sata mode for use with XP you might have problems dual booting with XP if you change the bios setting since XP is already installed. If both hard drives show up in your boot order list in the bios, that's ok......just make sure that the DVD drive is the first drive in the boot order so that you can install Win7 by booting from the DVD.
   If you are currently able to boot into XP, you shouldn't have any problems with the existing XP O.S. If you are having problems even booting into XP you might have to do a repair of the XP operating system by booting from the XP cd and selecting "Repair start-up" when the XP CD loads.
   Your hardware looks like it should work fine with Win7 and Win7 should automatically load all the necessary drivers during installation and when done each time you boot up your PC you will get a screen offering you the choice of which operating system you want to boot up (usually right after the bios screen). You will have 30 seconds to pick which O.S. you want to play with!
   In XP you will be able to "see" the win7 partition; but, in Win7 you won't be able to "see" the XP O.S. (you can assign a drive letter to the XP partition in Win7, but it's safer to leave it "out of sight). Both O.S. will show up as "C" in when you boot them up. Good luck...........you'll love Win7!

I just downloaded Adobe Acrobat XI Pro, I am in the install process now and I am getting an Error message, Error 1303, stating I need to log on as an administrator ... this is my computer so I don't understand the issue??

I just downloaded Adobe Acrobat XI Pro, I am in the install process now and I am getting an Error message, Error 1303, stating I need to log on as an administrator ... this is my computer so I don't understand the issue??

Hi MAX22,
Even though it's your computer but your user account might not have sufficient privileges to install the software.
Please try the following :
> Enable the hidden Admin Account on Windows 7 ( Ref : http://www.howtogeek.com/howto/windows-vista/enable-the-hidden-administrator-account-on-wi ndows-vista/ )
Reboot and try installing in the new enabled Admin user account and check.
Regards,
Rave

Add-ons stuck at the beginning of install process

I just updated from Firefox 3.6 to 5.0.1. All of my extensions completely disappeared. I'm trying to reinstall the ones I really need. The three I've tried so far (FireFTP, Web Developer, and Colorzilla) download, start to install, get about 2% into the install process, then just sit there. If I close Firefox, the installations disappear. When I restart Firefox and try again to install the extensions, the same thing happens -- they get stuck in the install process.

Duplicate thread (please post only once):
At the beginning of install EBS R12 on Ubuntu 8.04 amd64 (Linux Debian)
At the beginning of install EBS R12 on Ubuntu 8.04 amd64 (Linux Debian)

Is the Arch install process the same as Mint's?

1.)Taking into consideation that it took me a few trys to even register for the forum (facepalms) and that I have only ever been a Mint user, how does the Arch install process compare to that of Mints?
2.)Will the install for a duel boot with Windows 7 be just as easy with Arch as it is with Mint?
3.)Are my questions an indication that I am probably not ready for Arch? (laughs)
4.)I really only use the Linux half of my duel boot when I am on unsecure networks while travleing and it makes me feel safer etc.. and when I do use it it's really just for browsing the internet. Should I just stick with Mint if thats all I really do?
I have heard only good things about Arch and if it's not going to make me want to rip out my hair, I would certinly like to reaplce Mint with Arch. Thank you for your time and help.

I came from Mint to Arch, via Debian and LFS. With regards to Grub, I'm still using the same grub installed by Mint two years ago, even though I no longer have Mint on the system. However, I do use a separate /boot partition and I'm comfortable editing grub.cfg directly when required. It does, however, mean that I never have to worry about adding a new OS for dual boot. Having said that, it's certainly not something I would suggest to anyone with limited experience.
Don't let others put you off with the "Arch is high maintenance" thing. If I'm honest, I don't find Arch significantly more high maintenance than any other Linux distro, though certainly during install and initial set up it helps if you have a reasonably good understanding of how the system is configured. Whereas the likes of Mint and other pre-built general distros have most of the system configuration done for you out of the box, on Arch you have to walk the extra mile and do it yourself. Linux is like women. The more you have to do to get them, the more you will get out of them in the end
Nevertheless, I fully agree with the "Test in a VM and get comfortable" philosophy first. This will help when you eventually come to a full install significantly. I did two test installs before a complete one, noting down where I had to pay particular attention. Also make sure that you don't need any firmware files, especially for network, when installing for real, or at least get the files and put them on a USB stick. Nothing worse than installing a system them not having any network to get the firmware required to get the network working. Catch 22 anyone?
Last edited by Roken (2012-04-23 10:46:23)

Every app install results in the "waiting" mode on my home screen. How can I complete the install process?

Every attempted app installation results in the "waiting" mode icon on my home screen. How can I complete the install process? What am I missing?

Hi,
1) Forget downloading the application from the device, and instead download it through iTunes and sync to transfer the application to your iPhone / iPad.
2) Other way is: Go to Application Settings> Store and tap above the Apple ID to sign out. Restart your iPhone / iPad, go back to Settings> Store and sign. Tap the icon that was waiting to update the application.

[Solved] Error upon selecting "base" package during install process

Hey guys,
I got stuck in the install process. the following issue never occured to be before.
Upon selecting the base package during install and pressing "OK", i recieve the following error:
ERROR: check_is_in needs a non-empty needle as $1 and a haystack as $2!(gote: check_is_in '' 'base')
and that throws me out of the installation process.
A google search on the error message only returned sites where the responsible script is postet.
I am installing arch linux on a lenovo x220, on a seperate ext4 partition.
Any help is appreciated, thanks!
Last edited by replax (2012-11-06 20:30:55)

ArielVoynes wrote:The problem is with mirrors.kernel.org (now that I remember, I've read about kernel.org having trouble with their servers, is this still true?). Just choosing another mirror solves the problem.
I just read through this post and it did fix my issue. However, I do not remember what mirror I selected.
It was a few selections below kernel.org......
Last edited by BradJ (2011-09-20 04:27:17)

I have Macromedia Fireworks 3.0 and the install process doesn´t run! After the installation the message is: fireworks cannot run. the resource files are missing or damaged. I use Windows 8.1

I have Macromedia Fireworks 3.0 and the install process doesn´t run! After the installation the message is: fireworks cannot run. the resource files are missing or damaged. I use Windows 8.1. Antworten auf Deutsch wären super!

As far as I know there is no download resource for older Macromedia programs and it is highly unlikely that one as old as version 3 of Fireworks will be able to work on a Windows 8.1 system. I was unable to get a Studio 8 version installation on a Vista system, and likely even an XP system (cannot remember that far back).

I have a Windows laptop running with Windows 7 (64 bits). i was using itunes normally. Few days ago I upgraded to 10.5.2. When I completed download and install process, itunes opened and got stuck.It says "Updating itunes library". What can I do?

I have a Windows laptop running with Windows 7 (64 bits). i was using itunes normally. Few days ago I upgraded to 10.5.2. When I completed download and install process, itunes opened and got stuck.It says "Updating itunes library". What can I do?

Hi Drgeert-
The hub may not be broken per se, but Apple has made adjustments to the limits on current that can be drawn from ports.
You probably need a new hub.
These may be helpful and/or interesting:
USB: High Bandwidth and Isochronous Devices Must Be Separated
USB Product-Specific Details
Luck-
-DaddyPaycheck

I am not able to install asphalt 8 on ios 7 ipad retina display. I am downloading it directly but on the install process it is stuck.

I am not able to install asphalt 8 on ios 7 ipad retina display. I am downloading it directly but on the install process it is stuck.

Try rebooting your iPad by holding down the power and home buttons simultaneously until a blank screen with the Apple logo appears. Ignore the power off slider if it appears. After a while your device should go to the main screen, as if you're turning the iPad on. Don't worry, this won't do anything to your data, it just literally restarts the iPad.

Environment variables not set by the install process

Hello,
Installed 11.5.10 on Redhat LIniux AS3.0
None of the env variables (like APPL_TOP, OA_HTML, AR_TOP etc.,) are set by the install process do I need to run a separate script to set these varibales?
Thanks

Hi guys,
I'm having exactly the same issues and more, when i try execute the *.env files i get a permission denied. Below is the output when running APPSORA.env
[oracle@linux prodappl]$ ./APPSORA.env
-bash: ./APPSORA.env: Permission denied
below i list the permission etc on the *.env files in the APPL_TOP
[oracle@linux prodappl]$ ls -l *.env
-rw-r--r-- 1 oracle oracle 989 Oct 8 08:22 APPSORA.env
-rw-r--r-- 1 oracle oracle 989 Oct 8 08:22 APPSPROD_linux.env
-rw-r--r-- 1 oracle oracle 9396 Oct 8 08:22 PROD.env
-rw-r--r-- 1 oracle oracle 9396 Oct 8 08:22 PROD_linux.env
I've tried to change the permissions on the files and running, even though they don't return a permission denied message i'm get the same problem as KAR. The environments are just not getting setting, if i tried cd $APPL_TOP i just get dumped into /oracle/home

Filevault was turned on during the 10.10 install process - crash while laptop in plugged in.

I Installed 10.10 last night and the installation was successful. During the install process 10.10 asked if I want FileVault, and I declined.
After a restart, looks like FileVault got turned on and now trying to encrypt my HD.
Now, computer is crashing while the encryption is processing and looks like it froze half way through the process.
I don't want FileVault turned on nor do I want my data encrypte. I tried to turn off FileVault and now it won't let me.
I am now stuck in the middle of the process and my computer crashes when the laptop is plugged in. FileVault stops processing she the computer is not plugged in and that is the only time my computer works...
I am now trying to backup using time machine and going to reload the OS, unless somebody has a better idea.
Thanks so much.

it beeped once.
Beeps are an indication there's a problem with the RAM (memory)
Power On Self-Test Beep Definition
Probably time to replace the RAM.
You can uninstall and install RAM yourself > MacBook Pro: How to remove or install memory
You can purchase RAM online. Crucial comes highly recommended > Crucial.com
Or, you can take the Mac to an Apple Store or Apple certified repair provider > Apple - Find Locations
message edited by: cs

OK, I've downloaded Firefox 4.0, but there is no "continue" button to proceed with the "install" process! How do I install this update???

OK, I've downloaded Firefox 4.0, but there is no "continue" button to proceed with the "install" process! How do I install this update???

After saving the file which is likely called "Firefox Setup 4.0.1.exe" you need to run it to install Firefox 4.
If you do not clear the downloads from the download manager, you can run the installer from the downloads manager. Open the download manager, then right-click on the Firefox setup file and select Open. As soon as you start running the setup file, close Firefox. You need to do this so that the setup file can replace the files in the Firefox installation directory.

Install Process

Similar Messages

Maybe you are looking for