Install PS CS6 Win7 system error code --16

Install PS CS6 Win7 system error code --16? Then ，I need your help

Can you please provide a bit more details from the install log summary? Alternately you can follow the directions listed at Troubleshoot with install logs | CS5, CS5.5, CS6 - http://helpx.adobe.com/creative-suite/kb/troubleshoot-install-logs-cs5-cs5.html to review your installation logs.

Similar Messages

When I try to install adobe photoshop 13 on my computer it comes up with the following error message " This installer does not support installation on a 64bit windows operating system" error code 6. How to I recify this? TIA

When I try to install adobe photoshop 13 on my computer it comes up with the following error message " This installer does not support installation on a 64bit windows operating system" error code 6. How to I recify this? TIA

You can try downloading the 64 bit version. You can download the trial version of the software thru the page linked below and then use your current serial number to activate it.
Be sure to follow the steps outlined in the Note: Very Important Instructions section on the download pages at this site and have cookies enabled in your browser or else the download will not work properly.
Photoshop/Premiere Elements 13: http://prodesigntools.com/photoshop-elements-13-direct-download-links-premiere.html

When I try to open Photoshop CS6 I get "Error Code 16"

When I try to open Photoshop CS6 I get "Error Code 16"
I have researched Internet - ADOBE and others - to find a solution, but no luck! (see under)
The problem started around one year ago but I was able to open Bridge and go to Photoshop from there until recently.
Now I get "Error Code 16" in Bridge too when I am trying to go to Photoshop.
I have tried everything I could think of (including creating a new Administrator-user) with help from my Internet research and my own pretty good experience (I started working with computer systems as a Systems Analysts 1968...... - now it is only PCs)
I miss my Photoshop and Bridge a lot - it is very frustrating to have this problem, but I can see I am not the only one!!!
I also have these Adobe products:
Adobe Photoshop
1045-1297-1724-5553-8938-xxxx
Adobe InDesign
1037-1476-0290-3491-8464-xxxx
Adobe Audition
1137-1169-5106-2253-7226-xxxx
Adobe Photoshop
1045-1007-5934-1160-3319-xxxx
Adobe Photoshop Elements
1057-4535-7945-2468-2014-xxxx
and some more.
I am grateful for all help.
/// Björn Andrén   -   [email protected]   (member ID)
=======================================================================
Configuration error 16 when you start a Creative Cloud (CC) or Creative Suite (CS) application
https://helpx.adobe.com/x-productkb/policy-pricing/configuration-error-cs5.html
========================================================================
Adobe CC/CS6 - Error 16 and no SLStore or PCD File
https://forums.adobe.com/message/7157810
https://forums.adobe.com/thread/1243845?tstart=0
=========================================================================
How to Erase an Adobe Registration File
http://smallbusiness.chron.com/erase-adobe-registration-file-45714.html
=========================================================================
Why can't I open Photoshop CS6? Missing Adobe PCD and SLstore folders!?
https://answers.yahoo.com/question/index?qid=20130608085953AAuWzEA
========================================================================
Issue with getting an Error code '16' if trying to install Adobe Photoshop CS5
http://thedailybuggle.com/forum/issue-getting-error-code-16-if-trying-install-adobe-photos hop-cs5-66.html
========================================================================
Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6
https://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html
Mon Feb 09 17:24:22 2015] ---------------------------------------------------------
[Mon Feb 09 17:24:22 2015] *=*=*=*=*=*=*=*=* :: Start Session :: *=*=*=*=*=*=*=*=*=*
[Mon Feb 09 17:24:22 2015] ---------------------------------------------------------
[Mon Feb 09 17:24:22 2015] Win OS Version: 6.1
[Mon Feb 09 17:24:22 2015] Cleaner Tool version        : 2.0.0.0
[Mon Feb 09 17:24:22 2015] Cleanup source directory    : C:\Program Files (x86)\Common Files\Adobe\AdobeCreativeCloudCleanerTool
[Mon Feb 09 17:24:22 2015] [AdobeProgramFiles]        : C:\Program Files (x86)\Adobe
[Mon Feb 09 17:24:22 2015] [AdobeProgramFiles_x64]    : C:\Program Files\Adobe
[Mon Feb 09 17:24:22 2015] [AdobeCommon]            : C:\Program Files (x86)\Common Files\Adobe
[Mon Feb 09 17:24:22 2015] [AdobeCommon_x64]        : C:\Program Files\Common Files\Adobe
[Mon Feb 09 17:24:22 2015] [UserRoamingAppData]        : C:\Users\BEAR2\AppData\Roaming
[Mon Feb 09 17:24:22 2015] [UserLocalAppData]        : C:\Users\BEAR2\AppData\Local
[Mon Feb 09 17:24:22 2015] [StartMenu]                : C:\ProgramData\Microsoft\Windows\Start Menu\Programs
[Mon Feb 09 17:24:22 2015] [System32Folder]            : C:\Windows\system32
[Mon Feb 09 17:24:22 2015] [SharedApplicationData]    : C:\ProgramData
[Mon Feb 09 17:24:28 2015] Language selected: English
[Mon Feb 09 17:24:28 2015] Displaying the Adobe End User License Agreement
ADOBE
Gen_WWCombined-en_US-20121017_1230
[Mon Feb 09 17:24:28 2015] Please enter (y) for Yes or (n) for No. ... >>
[Mon Feb 09 17:24:38 2015] Choose from one of the following options to clean up :
[Mon Feb 09 17:24:38 2015] 1. All
[Mon Feb 09 17:24:38 2015] 2. Adobe Flash Player 10.2
[Mon Feb 09 17:24:38 2015] 3. Creative Cloud 2014 , Creative Cloud & CS6 Products
[Mon Feb 09 17:24:38 2015] 4. Creative Cloud 2014 only
[Mon Feb 09 17:24:38 2015] 5. Creative Cloud only
[Mon Feb 09 17:24:38 2015] 6. CS6 only
[Mon Feb 09 17:24:38 2015] 7. CS5-CS5.5-CS6
[Mon Feb 09 17:24:38 2015] 8. CS5-CS5.5
[Mon Feb 09 17:24:38 2015] 9. CS3, CS4
[Mon Feb 09 17:24:38 2015] 10. Adobe Id credentials
[Mon Feb 09 17:24:38 2015] 11. Quit
[Mon Feb 09 17:24:38 2015] Choice :>
[Mon Feb 09 17:24:44 2015] User selected: CS6 Only
[Mon Feb 09 17:24:44 2015] Executed the command : call copy /Y "C:\Program Files (x86)\Common Files\Adobe\caps\pdb.db" "C:\Program Files (x86)\Common Files\Adobe\backup20150209T172444\pdb.db"
[Mon Feb 09 17:24:44 2015] Executed the command : call copy /Y "C:\Program Files (x86)\Common Files\Adobe\caps\Media_db.db" "C:\Program Files (x86)\Common Files\Adobe\backup20150209T172444\Media_db.db"
[Mon Feb 09 17:24:44 2015] Opened DB connection with path: C:\Program Files (x86)\Common Files\Adobe\caps\pdb.db
[Mon Feb 09 17:24:44 2015] DB does not exist at: C:\Program Files (x86)\Common Files\Adobe\caps\Media_db.db
[Mon Feb 09 17:24:44 2015] List of products installed on this machine
[Mon Feb 09 17:24:44 2015] Listing products for cleanup:
[Mon Feb 09 17:24:44 2015] Please enter the option number of the product you wish to remove; enter (q) to quit ... >>
[Mon Feb 09 17:25:02 2015] response 1
[Mon Feb 09 17:25:02 2015] Are you sure you want to clean all the listed products and associated files?
[Mon Feb 09 17:25:02 2015] Type (y) to confirm and remove or (n) to quit ... >>
[Mon Feb 09 17:25:07 2015] Please wait for Adobe Creative Cloud Cleaner Tool to finish........
[Mon Feb 09 17:25:07 2015] User selected: 'Clean All'
[Mon Feb 09 17:25:07 2015] *-*-*-*-*-*-* Start removing product : ALL *-*-*-*-*-*-*
[Mon Feb 09 17:25:07 2015] *-*-*-*-*-*-* Finished removing product : ALL *-*-*-*-*-*-*
[Mon Feb 09 17:25:07 2015] Action : Deleting the C:\Program Files (x86)\Common Files\Adobe\backup20150209T172444 folder as there is no product deleted.
[Mon Feb 09 17:25:07 2015] LOG FILE SAVED TO: C:\Users\BEAR2\AppData\Local\Temp\Adobe Creative Cloud Cleaner Tool.log
[Mon Feb 09 17:25:07 2015] Adobe Creative Cloud Cleaner Tool completed successfully
[Mon Feb 09 17:25:07 2015]
[Mon Feb 09 17:25:07 2015] *-*-*-*-*-*- ::START:: - SUMMARY OF Warnings -*-*-*-*-*-*
[Mon Feb 09 17:24:44 2015] DB does not exist at: C:\Program Files (x86)\Common Files\Adobe\caps\Media_db.db
[Mon Feb 09 17:25:07 2015] *-*-*-*-*-*- :: END :: - SUMMARY OF Warnings -*-*-*-*-*-*
[Mon Feb 09 17:25:07 2015] ---------------------------------------------------------
[Mon Feb 09 17:25:07 2015] *=*=*=*=*=*=*=*=* :: End Session :: *=*=*=*=*=*=*=*=*=*=*
[Mon Feb 09 17:25:07 2015] ---------------------------------------------------------
[Mon Feb 09 17:28:53 2015] ---------------------------------------------------------
[Mon Feb 09 17:28:53 2015] *=*=*=*=*=*=*=*=* :: Start Session :: *=*=*=*=*=*=*=*=*=*
[Mon Feb 09 17:28:53 2015] ---------------------------------------------------------
[Mon Feb 09 17:28:53 2015] Win OS Version: 6.1
[Mon Feb 09 17:28:53 2015] Cleaner Tool version        : 2.0.0.0
[Mon Feb 09 17:28:53 2015] Cleanup source directory    : C:\Program Files (x86)\Common Files\Adobe\AdobeCreativeCloudCleanerTool
[Mon Feb 09 17:28:53 2015] [AdobeProgramFiles]        : C:\Program Files (x86)\Adobe
[Mon Feb 09 17:28:53 2015] [AdobeProgramFiles_x64]    : C:\Program Files\Adobe
================================================================================
OS Name    Microsoft Windows 7 Professional
Version    6.1.7601 Service Pack 1 Build 7601
Other OS Description     Not Available
OS Manufacturer    Microsoft Corporation
System Name    BEAR-PC
System Manufacturer    System manufacturer
System Model    System Product Name
System Type    x64-based PC
Processor    Intel(R) Core(TM) i7-2600K CPU @ 3.40GHz, 3401 Mhz, 4 Core(s), 8 Logical Processor(s)
BIOS Version/Date    American Megatrends Inc. 0801, 2011-08-15
SMBIOS Version    2.6
Windows Directory    C:\Windows
System Directory    C:\Windows\system32
Boot Device    \Device\HarddiskVolume1
Locale    United States
Hardware Abstraction Layer    Version = "6.1.7601.17514"
User Name    BEAR-PC\BEAR2
Time Zone    Eastern Standard Time
Installed Physical Memory (RAM)    16.0 GB
Total Physical Memory    16.0 GB
Available Physical Memory    12.1 GB
Total Virtual Memory    31.9 GB
Available Virtual Memory    28.1 GB
Page File Space    16.0 GB
Page File    C:\pagefile.sys

Run the cleaner tool and reinstall.
Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6
Download CS6 products
Mylenium

SCOM 2012 R2 Agent Issue: Error 25211.Failed to install performance counters.. Error Code: -2147024809

Hi All,
I'm trying to deploy SCOM 2012 R2 agent onto a domain controller and I get the following error "Product: Microsoft Monitoring Agent -- Error 25211.Failed to install performance counters.. Error Code: -2147024809 (The parameter is incorrect.)."
I've installed the agent successfully onto 4 other domain controllers with out any issues.</p><p>The domain controllers are all VM's running on VMWare and are Windows Server 2012 R2.
I've rebuilt the Perfmon Counters based on this article: https://support.microsoft.com/en-us/kb/2554336?a=wsignin1.0
I've also enabled verbose logging on the msi installation:
InstallHSPerfCounters: Custom Action Data. C:\Program Files\Microsoft Monitoring Agent\Agent\
InstallHSPerfCounters: Installing agent perf counters.
InstallCounters: LoadPerfCounterTextStrings() failed . Error Code: 0x80070057. momv3 "C:\Program Files\Microsoft Monitoring Agent\Agent\HealthServiceCounters.ini"
InstallPerfCountersHelper: pcCounterInstaller->InstallCounters() for the default counters failed. Error Code: 0x80070057. HealthService
InstallPerfCountersLib: InstallHealthServicePerfCounters() failed . Error Code: 0x80070057.
InstallPerfCountersLib: Retry Count : .
InstallCounters: LoadPerfCounterTextStrings() failed . Error Code: 0x80070057. momv3 "C:\Program Files\Microsoft Monitoring Agent\Agent\MOMConnectorCounters.ini"
InstallPerfCountersHelper: pcCounterInstaller->InstallCounters() for the default counters failed. Error Code: 0x80070057. MOMConnector
InstallPerfCountersLib: InstallHealthServicePerfCounters() failed . Error Code: 0x80070057.
Any help on this would be great.

Hi Stefan,
I've successfully installed the agent. The server needed a reboot after fixing the corrupt perfmon counters.
I know have a issue with the agent on the domain controller. It kkeeps on greying out and have used hslockdown to allow the local system access by using the following command.
HSLockdown.exe "ManagementGroupName" /A "NT AUTHORITY\Authenticated Users"
Further digging into the issue I see in the SCOM Management Server the following error "The entity servername is not heartbeating"
Written a SQL query to gather more information. SQL query I used is:
SELECT
ME.FullName,
HSO.StartDateTime AS OutageStartDateTime,
DATEDIFF (DD, hso.StartDateTime, GETDATE()) AS OutageDays,
HSO.ReasonCode,
DS.Name AS ReasonString
FROM vManagedEntity AS ME
INNER JOIN vHealthServiceOutage AS HSO ON HSO.ManagedEntityRowId = ME.ManagedEntityRowId
INNER JOIN vStringResource AS SR ON HSO.ReasonCode =
REPLACE(LEFT(SR.StringResourceSystemName, LEN(SR.StringResourceSystemName)
– CHARINDEX(‘.’, REVERSE(SR.StringResourceSystemName))), ‘System.Availability.StateData.Reasons.’, ”)
INNER JOIN vDisplayString AS DS ON DS.ElementGuid = SR.StringResourceGuid
WHERE (SR.StringResourceSystemName LIKE ‘System.Availability.StateData.Reasons.[0-9]%’)
AND DS.LanguageCode = ‘ENU’
AND ME.FullName like ‘%SERVER NAME%’ –Change name here or leave %% for ALL SERVERS
ORDER BY OutageStartDateTime
This gives me the following reason behind the failure : "The heartbeat from System Center Management Service is missing."
Have I missed anything? The agent is running fine, however SCOM is reporting that the heartbeat is missing.
Any help on this would be great.

System error code 5 (and error code 80240016)

I was having trouble with Windows updater (error code 80240016) when I tried to install SP1, and then found the solution was to open service command and follow the instructions given on this microsoft site (http://support.microsoft.com/default.aspx/kb/957307) . BUT it didn't work, because for some reason access was denied and it kept saying 'System Error Code 5". I don't know what it means and how to fix it!
Please help, I can't update windows until this issue is resolved!

Hi
Sorry that article did not help.
I was under the impression that the article was operating system agnostic and that the settings would work for any version of Windows.
I would recommend that you take advantage of the free, unlimited support that Microsoft is offering for Windows Update issues.
This will connect you directly with the support engineers that specialize in WU problems. Be sure and include an exact description of the problem, including the proxy connection you use.
Windows Update No-Charge, Unlimited Support:
https://support.microsoft.com/oas/default.aspx?gprid=6527
You might also want to peruse the Windows Update newsgroup to see if anyone there may have seen and possibly solved a similar problem.
Discussions in Windows Update:
http://www.microsoft.com/communities/newsgroups/en-us/default.aspx?dg=microsoft.public.windowsupdate&cat=en_US_56d1dd45-de9e-4fc5-9bc1-2d1d0de6daee&lang=en&cr=US
Good luck.
If this post helps to resolve your issue, click the Mark as Answer button at the top of this message.
Ronnie Vernon
Microsoft MVP
Windows Desktop Experience

Trying to update Exchange Manager 6.0.8 on CS6 and getting Error Code: U44M1P7.

Trying to update Exchange Manager 6.0.8 on CS6 and getting Error Code: U44M1P7. Have tried installing manually but still no joy.

Please delete the EM CS6 installation folder manually, then download and install the EM 6.0.8 from Adobe - Exchange : Download the Adobe Extension Manager

What does this mean? Server Message: Unable to load server - system error code: 0x80080005, CO_E_SERVER_EXEC_FAILURE: Server execution failed.

This is the error that we get when we run the Tag File.
ERROR 04/16/2004 02:26:15 PM Server ERROR from Server: National Instruments.OPCLookoutDrivers. Status: -196608, Server Message: Unable to load server - system error code: 0x80080005, CO_E_SERVER_EXEC_FAILURE: Server execution failed.
What does it all mean?

ACRE,
this looks like the Industrial Automation OPC Server (Lookout OPC) is not correctly installed or configured and therefore the DSC Tag Engine - as OPC client - cannot launch the OPC server correctly.
Two checks I have in mind.
- Installation check: Check if the Industrial Automation Server is installed and configured correctly and that you will have a .lpd file as default. Could it be that the .lpd file is corrupted? BTW - what kind of protocol are you using and did you configure aliases for the LPD object? A good resource on checking the configuration might be the online help of Industrial Automation Server (Lookout Protocol Drivers) or the link penDocument>How Do I Configure My Devices with Lookout Protocol Drivers?
- Access rights, COM/DCOM problems: Can you launch the OPC Server with another OPC client? Is your OPC server running locally? If you don't know how to check on this I found a good KB Tools for Troubleshooting OPC Interface Problems E.g. can you access it with Server Explorer?
Last question... did you encounter this problem recently while it was working before? What changes have been done on your system?
Let us know if you have some questions and I hope some of the links help you further troubleshooting this issue.
Roland

Upgrade to SCOM 2012 Agent - 25211.Failed to install performance counters.. Error Code: -2147024809 (The parameters is incorrect)

I have seen this behavior on multiple servers. I receive this error when upgrading from a 2007 Agent to SCOM 2012.
Event ID: 10005
Product: System Center 2012 - Operations Manager Agent -- Error 25211.Failed to install performance counters.. Error Code: -2147024809 (The parameter is incorrect.).
Event ID: 1008
The Open Procedure for service "HealthService" in DLL "C:\Program Files\System Center Operations Manager 2007\HealthServicePerformance.dll" failed. Performance data for this service will not be available. The Status code returned is the
first DWORD in the attached data.
Any idea why I receive this error?
Thanks
Mike

Hi,
Please refer to this article:
SCOM 2012 – Unable to upgrade agent after upgrade from SCOM 2007
http://www.phits.nl/wordpress/2013/02/01/scom-2012-unable-to-update-agent-after-upgrade-from-scom-2007/
Alex Zhao
TechNet Community Support

SSIS BULK INSERT unsing UNC inside of ForEach Loop Container Failed could not be opened. Operating system error code 5(Access is denied.)

Hi,
I am trying to figure out how to fix my problem
Error: Could not be opened. Operating system error code 5(Access is denied.)
Process Description:
Target Database Server Reside on different Server in the Network
SSIS Package runs from a Remote Server
SSIS Package use a ForEachLoop Container to loop into a directory to do Bulk Insert
SSIS Package use variables to specified the share location of the files using UNC like this
\\server\files
Database Service accounts under the Database is runing it has full permission on the share drive were the files reside.
In the Execution Results tab shows the prepare SQL statement for the BULK insert and I can run the same exact the bulk insert in SSMS without errors, from the Database Server and from the server were SSIS package is executed.
I am on a dead end and I don’t want to re-write SSIS to use Data Flow Task because is not flexible to update when metadata of the table changed.
Below post it has almost the same situation:
https://social.msdn.microsoft.com/Forums/sqlserver/en-US/8de13e74-709a-43a5-8be2-034b764ca44f/problem-with-bulk-insert-task-in-foreach-loop?forum=sqlintegrationservices

Insteresting how I fixed the issue, Adding the Application Name into the SQL OLAP Connection String Fixed the issue. I am not sure why SQL Server wasn't able to open the file remotely without this.

SSRS 2005 report: Cannot bulk load Operating system error code 5(Access is denied.)

I built a SSRS 2005 report, which calls a stored proc on SQL Server 2005. The proc contains following code:
CREATE TABLE #promo (promo VARCHAR(1000))
BULK
INSERT #promo
FROM '\\aseposretail\c$\nz\promo_names.txt'
WITH
--FIELDTERMINATOR = '',
ROWTERMINATOR = '\n'
SELECT * from #promo
It's ok when I manually execute the proc in SSMS.
When I try to run the report from BIDS I got following error:
*Cannot bulk load because the file "\aseposretail\c$\nz\promo_names.txt" could not be opened. Operating system error code 5(Access is denied.).*
Note: I have gooled a bit and see many questions on this but they are not relevant because I CAN run the code no problem in SSMS. It's the SSRS having the issue. I know little about the security of SSRS.

I'm having the same type of issue. I can bulk load the same file into the same table on the same server using the same login on one workstation, but not on another. I get this error:
Msg 4861, Level 16, State 1, Line 1
Cannot bulk load because the file "\\xxx\abc.txt" could not be opened. Operating system error code 5(Access is denied.).
I've checked SQL client versions and they are the same, I've also set the client connection to TCP/IP only in the SQL Server Configuration Manager. Still this one workstation is getting the error. Since the same login is being used on both workstations and it works on one but not the other, the issue is not a permissions issue. I can also have another user login into the bad workstation and have the bulk load fail, but when they log into their regular workstation it works fine. Any ideas on what the client configuration issue is? These are the version numbers for Management Studio:
Microsoft SQL Server Management Studio 9.00.3042.00
Microsoft Analysis Services Client Tools 2005.090.3042.00
Microsoft Data Access Components (MDAC) 2000.085.1132.00 (xpsp.080413-0852)
Microsoft MSXML 2.6 3.0 5.0 6.0
Microsoft Internet Explorer 6.0.2900.5512
Microsoft .NET Framework 2.0.50727.1433
Operating System 5.1.2600
Thanks,
MWise

Error while creating Mysite in sharepoint 2010 , System error code 0

Hi I was trying to create Mysite and I got the following error.
Previously all user able to create MySite this error is coming from 3 days
My Site creation failure for user XXXX\cwr.SMahindrakar' for site url 'https://XXXXXXXX/personal/cwr_smahindrakar'. The exception was: Microsoft.Office.Server.UserProfiles.PersonalSiteCreateException: A failure was encountered while attempting to create the site. ---> System.ArgumentException: Error during decryption. System error code 0.
at Microsoft.SharePoint.Administration.SPCredentialManager.DecryptWithApplicationCredentialKey(Byte[] rgbEncryptedPassphrase)
at Microsoft.SharePoint.Administration.SPPeoplePickerSearchActiveDirectoryDomain.get_Password()
at Microsoft.SharePoint.Utilities.SPActiveDirectoryDomain..ctor(SPPeoplePickerSearchActiveDirectoryDomain peoplePickerDomain)
at Microsoft.SharePoint.Utilities.SPUserUtility.GetWindowsPrincipalResolvers(SPWebApplication webApp, String userAccountDirectoryPathRestriction, SPPrincipalResolver bySidResolver)
at Microsoft.SharePoint.Utilities.SPUserUtility.CreatePrincipalResolvers(SPWebApplication webApp, ICollection`1 urlZones, Nullable`1 currentZone, SPPrincipalResolver bySidResolver, String userAccountDirectoryPathRestriction, Boolean alwaysAddWindowsResolver)
at Microsoft.SharePoint.Utilities.SPUtility.ResolvePrincipalInternal(SPWeb web, SPWebApplication webApp, Nullable`1 urlZone, String input, SPPrincipalType scopes, SPPrincipalSource sources, SPUserCollection usersContainer, Boolean inputIsEmailOnly, Boolean alwaysAddWindowsResolver)
at Microsoft.SharePoint.Utilities.SPUtility.ResolvePrincipal(SPWebApplication webApp, Nullable`1 urlZone, String input, SPPrincipalType scopes, SPPrincipalSource sources, Boolean inputIsEmailOnly)
at Microsoft.SharePoint.Administration.SPSiteCollection.Add(SPContentDatabase database, SPSiteSubscription siteSubscription, String siteUrl, String title, String description, UInt32 nLCID, String webTemplate, String ownerLogin, String ownerName, String ownerEmail, String secondaryContactLogin, String secondaryContactName, String secondaryContactEmail, String quotaTemplate, String sscRootWebUrl, Boolean useHostHeaderAsSiteName)
at Microsoft.SharePoint.SPSite.SelfServiceCreateSite(String siteUrl, String title, String description, UInt32 nLCID, String webTemplate, String ownerLogin, String ownerName, String ownerEmail, String contactLogin, String contactName, String contactEmail, String quotaTemplate, SPSiteSubscription siteSubscription)
at Microsoft.Office.Server.UserProfiles.UserProfile.<>c__DisplayClass2.<CreateSite>b__0()
--- End of inner exception stack trace ---
at Microsoft.Office.Server.UserProfiles.UserProfile.<>c__DisplayClass2.<CreateSite>b__0()
at Microsoft.SharePoint.SPSecurity.<>c__DisplayClass4.<RunWithElevatedPrivileges>b__2()
at Microsoft.SharePoint.Utilities.SecurityContext.RunAsProcess(CodeToRunElevated secureCode)
at Microsoft.SharePoint.SPSecurity.RunWithElevatedPrivileges(WaitCallback secureCode, Object param)
at Microsoft.SharePoint.SPSecurity.RunWithElevatedPrivileges(CodeToRunElevated secureCode)
Error is coming on Prod Env, I have tried diffrent trial and Error method but still I am not able to find root cause.
Please mark answer , if you think answer is helpful or correct.

Hi All,
To resolve these issues I have checked following things, and which all seems no issues
1)Quota Limit
2)Database read only mode
3)Appl pool account access to database
4)Changed app pool account with farm account
5)Added app pool account to MySite admin group
6)Database size limit
7)Site collection site limit to MySite host
8)User Profile service is running or not
9)Self site creation to user
10)Service application association to MYsite Host
All above I have tested but it seems no error, still I am getting above Error.
One more things I want to add is that Central admin people picker does not recognize users.
That can be an issue?
Please mark answer , if you think answer is helpful or correct.

Trying to install iCloud on Win7 get error message either no default mail client or current mail client cannot fulfill messaging request. How fix?

Trying to install iCloud on Win7 get error message either no default mail client or current mail client cannot fulfill messaging request. How fix?

Outlook 2013. Under Start Up Options, I have checked "Make Outlook the default program for E-mail, Contacts, and Calendar".

Installation of Updates for Photoshop CS6 failed. Error code U44M1U5 for Camera Raw and U44M1P210 for Adobe Application Manager

The Installtion of updates for Photoshop CS6 failed. Error code for Update of Adobe Application Manager is U44M1P210, for all other features (Adobe Bridge, Photoshop CS6, Camera Raw) U44 M1U5

You go Photoshop CS6 > Help > Updates ...

You are not authorized to logon to the target system (error code 1)

Dear Expert,
I met some problems that 'You are not authorized to logon to the target system (error code 1)' when I tried to do the auth. testing for RFC SM_CLNT<SID>_TRUSTED in satellite system.
Following SAP note 128447, I recreated the RFCs in SMSY in solution manager for satellite system using existing user.
It was still error ''You are not authorized to logon to the target system (error code 1)'.
In SMSY in solman, I checked the RFCs connection which I recreated using RFC wizard, they are ok(green).
I have already maintain the auth. obj S_RFCACL for user who is running this.
So, I am confused what authorization I did not maintain in user? Please help me out!
Thanks a lot!
Br,
Lucy
Edited by: lucy YANG on Mar 19, 2011 6:59 AM
Edited by: lucy YANG on Mar 19, 2011 7:01 AM

Hello Lucy,
The error is pretty clear that the calling system is not a trusted system so I don't think you should bother with an authorization trace at this time, because authorizations is not quite the issue. The calling system is NOT a trusted system, authorizations or not.
Please refer to SAP Note 128447 Trusted/Trusting systems
The error is listed there:
Authorization errors that occur when using an RFC destination for which
the 'Trusted Systems' indicator is set are documented with the following
message:
"No authorization to log on as a trusted system (Trusted RC = #)."
In this case, the trusted return code # (# = 0, 1, 2, 3) has the
following relevance:
1   The calling system is not a trusted system, or the
     security key for the system is invalid.
     Solution: Recreate the trusted system (see
     documentation).
These are the links the Note provides for the documentation:
[http://help.sap.com
/saphelp_nw04/helpdata/en/22/042671488911d189490000e829fbbd/frameset.htm
] in accordance with the documentation
[http://help.sap.com/
saphelp_nw04/helpdata/en/8b/0010519daef443ab06d38d7ade26f4/content.htm].
The Note states to recreate the Trusted system according to the Documentation (links above)
This is all in the Note. Please follow the Note to reslve this known error.
Regards,
Paul

Error during encryption or decryption. System error code 997.

Hello,
I am trying to reconnect to a farmafter my PDC crashed and I had to create all the new users, When I run the sharepoint configuration tool and can get as far as entering the DB server which then finds the sharepoint_config. I add the connection details and select next which then throws up the following error:
09/13/2008 13:20:34 8 INF                              The parameter user is chosen,
so returning the value as IPIC\cdigby
09/13/2008 13:20:34 8 INF                              Entering function Command.this[string key]
09/13/2008 13:20:34 8 INF                                Entering function CommandCollectionBase.Get
09/13/2008 13:20:34 8 INF                                  Found value in collection for key password
09/13/2008 13:20:34 8 INF                                Leaving function CommandCollectionBase.Get
09/13/2008 13:20:34 8 INF                                Found parameter password in collection
09/13/2008 13:20:34 8 INF                              Leaving function Command.this[string key]
09/13/2008 13:20:34 8 INF                              The parameter password is chosen, so returning the value as ***************
09/13/2008 13:20:34 8 INF                              The parameter password is chosen, so returning the value as ***************
09/13/2008 13:20:34 8 INF                              Entering function Common.CreateSecureSringFrom
09/13/2008 13:20:34 8 INF                              Leaving function Common.CreateSecureSringFrom
09/13/2008 13:20:34 8 INF                              Entering function Farm.IsJoinedToFarm
09/13/2008 13:20:34 8 INF                                Entering function Farm.TryIsJoinedToFarm
09/13/2008 13:20:34 8 INF                                  My cached Farm object is null, so will load it
09/13/2008 13:20:34 8 INF                                  Calling SPFarm.Local and SPServer.Local to get the local farm objects
09/13/2008 13:20:34 8 INF                                  SPFarm.Local returned null. This usually means that the server is not joined. But, you can delete a server from the configdb without unjoining, which would mean that this machine still thinks it is joined.
09/13/2008 13:20:34 8 INF                                  Trying to access the server farm connection string
09/13/2008 13:20:34 8 INF                                  Entering function TaskCommon.TryGetWssVersion3ConnectionStringExists
09/13/2008 13:20:34 8 INF                                    Entering function RegistryHelper.RegistryHelper
09/13/2008 13:20:34 8 INF                                      The RegistryHelper has the key name as SOFTWARE\Microsoft\Shared Tools\Web Server Extensions\12.0\Secure\ConfigDB and the registry hive as LocalMachine
09/13/2008 13:20:34 8 INF                                    Leaving function RegistryHelper.RegistryHelper
09/13/2008 13:20:34 8 INF                                    WSS v3 registry key SOFTWARE\Microsoft\Shared Tools\Web Server Extensions\12.0\Secure\ConfigDB for the connection string does not exist
09/13/2008 13:20:34 8 INF                                    Unable to get the WSS v3 connection string
09/13/2008 13:20:34 8 INF                                  Leaving function TaskCommon.TryGetWssVersion3ConnectionStringExists
09/13/2008 13:20:34 8 INF                                  DID NOT discover a v3 connection string and SPFarm.Local indicates that this machine is not joined.
09/13/2008 13:20:34 8 INF                                  Entering function Farm.Clear
09/13/2008 13:20:34 8 INF                                    Entering function CentralAdminServiceInstance.Reset
09/13/2008 13:20:34 8 INF                                    Leaving function CentralAdminServiceInstance.Reset
09/13/2008 13:20:34 8 INF                                  Leaving function Farm.Clear
09/13/2008 13:20:34 8 INF                                Leaving function Farm.TryIsJoinedToFarm
09/13/2008 13:20:34 8 INF                              Leaving function Farm.IsJoinedToFarm
09/13/2008 13:20:34 8 INF                              Creating connection string for config db SharePoint_Config server IPIC-SERVER2\SHAREPOINT
09/13/2008 13:20:34 8 INF                              Creating connection string for admin content db SharePoint_AdminContent_938f78c4-0a10-4a04-b4e0-26a95d7a9022 server IPIC-SERVER2\SHAREPOINT
09/13/2008 13:20:34 8 INF                              Using NTLM for sql connection string
09/13/2008 13:20:34 8 INF                              Openning configdb so that I can join it at server IPIC-SERVER2\SHAREPOINT database SharePoint_Config in farm mode
09/13/2008 13:20:34 8 INF                              Now joining to farm at server IPIC-SERVER2\SHAREPOINT database SharePoint_Config
09/13/2008 13:21:38 8 ERR                              Task configdb has failed with an unknown exception
09/13/2008 13:21:38 8 ERR                              Exception: System.ArgumentException: Error during encryption or decryption. System error code 997.
   at Microsoft.SharePoint.Administration.SPCredentialManager.DecryptWithMasterKey(Byte[] rgbEncryptedPassphrase)
   at Microsoft.SharePoint.Administration.SPEncryptedString.GetSecureStringValue()
   at Microsoft.SharePoint.Administration.SPEncryptedString.get_SecureStringValue()
   at Microsoft.SharePoint.Administration.SPProcessIdentity.get_SecurePassword()
   at Microsoft.SharePoint.Administration.SPApplicationPool.Provision()
   at Microsoft.SharePoint.Administration.SPWebServiceInstance.Provision()
   at Microsoft.SharePoint.Administration.SPFarm.Join()
   at Microsoft.SharePoint.PostSetupConfiguration.ConfigurationDatabaseTask.CreateOrConnectConfigDb()
   at Microsoft.SharePoint.PostSetupConfiguration.ConfigurationDatabaseTask.Run()
   at Microsoft.SharePoint.PostSetupConfiguration.TaskThread.ExecuteTask()
If anyone can help me work around this I would be extremly grateful.
Thanks

   Hi,
I found an article explaining the issue: http://support.microsoft.com/kb/927156.
Please try to disconnect the configuration database from existing farm environment, and then create a new configuration database:
1.      Click Start, click Run, type cmd in the Open box, and then click OK.
2.      At the command line, change to the following directory: \Program Files\Common Files\Microsoft Shared\web server extensions
      \12\BIN
3.      At the command prompt, type the following command to create a new configuration database: psconfig -cmd configdb -create -server
     ServerName -database ConfigDBName -user Domain\User -password Password
4.      Rerun the SharePoint Products and Technologies Wizard.
Hope it helps.

Install PS CS6 Win7 system error code --16

Similar Messages

Maybe you are looking for