Install quickbooks on 2008 server

is there a way to install quickbooks on an 2008 server?

Yes, you should probably be asking the Intuit people the best way, I assume you want multiple users on at the same time. I'm also assuming you are not getting an error during the install that prompted you to ask here.

Similar Messages

CF9 install on Windows 2008 Server R2

Hi everyone I've installed Cold Fusion 9 on my windows 2008 Server r2 box and everything appears to be configured correctly becuase I can get to the Cold Fusion 9 Administrator page just fine. I've looked within IIS 7.5 and it's recognizing the .cfm file I think becuase it's an option under default documents. However I try to view the file from the local host I get a error 500.0.
Module
IsapiModule
Notification
ExecuteRequestHandler
Handler
AboMapperCustom-77246
Error Code
0x800700c1
I have no idea what that mapper is or what it's supposed to do so if anyone could help me out I would be eternally grateful! Why oh why couldnt cold fusion 9 have native IIS support in it.
UPDATE
Apparently this error 500.0 gets applied to all my sites within IIS 7.5. Not just the one I intend to use .cfm files on. When I go into the web configuration tool and remove the configured webservers and restart everything goes back to normal but the .cfm files throw a 404.3 not found error for the following module.
Module StaticFileModule
Notification ExecuteRequestHandler
Handler StaticFile
Error Code 0x80070032

Hi
Windows Server Core edition is not listed as supported platform:
http://www.adobe.com/products/coldfusion/systemreqs/
HTH, Carl.

ECC 6.0 installed in win 2008 server with db2 9

Dear all.,
I have newly installed sap erp ecc 6.0 in win 2008 server with db2.The installation is successfully finished and system is up and running.
But the issue is i could not find anything in the control centre to take backup and to do other activities.
I tried to add the system in control centre and i tried to run with DB2admin create command.
Please anybody let me know how to get all the systems and all database in control centre in db2.
ERROR returned SQL0104N
best regards.,
Manjunath G

db2admin create command is for creating the DAS, I guess no need of it here
http://publib.boulder.ibm.com/infocenter/db2luw/v8/index.jsp?topic=/com.ibm.db2.udb.doc/admin/t0004960.htm
On Windows server, start -> run -> db2cmd -> enter
Does it open db2cmd prompt ?
If yes, check these and paste the output here in forum
echo %DB2INSTANCE%
db2ilist
db2 list db directory
'I tried to add the system in control centre'
Ok, I guess you are trying to add the instance. Try the following link for 'Listing available instances' and 'adding additional instances'
http://books.google.co.in/books?id=YiO2oUNtXLQC&pg=PA118&lpg=PA118&dq=db2Listingtheinstancesinyoursystem&source=bl&ots=nvegXvy8du&sig=tnac90moH8XIpMOwiOC2RUx68K8&hl=en&ei=v1zHSvuSBY7o6gP2grGnDQ&sa=X&oi=book_result&ct=result&resnum=1#v=onepage&q=db2%20Listing%20the%20instances%20in%20your%20system&f=false

Problems installing Crystal Reports 2008 Server on Windows Server 2008 serv

I attempted to install the Crystal Reports 2008 product on one of our Windows Server 2008 servers.
After installing disk 1
Crystal Reports 2008 Server attempts to open up in IE...... but opens up to a blank page
http://bmlfileserver:8080/CmcApp/
anyone have any idea why? why does it not prompt for the second CD?
Is this a compatibility with Windows Server 2008?

I'm attempting to install CRS 2008 on Windows Server 2008 as well, and I'm running into a few issues. Did you ever get yours resolved? I started by trying to use IIS, but I'm uninstalling it completely now and will try Tomcat instead. Which route did you go?

Oracle 10gR2 silent install on Windows 2008 server

I understand that Oracle 10.2.0.5 is the ONLY supported version of db for Windows2008 server, but this is only a patch. There does not seem to be a complete install for the standard edition db server for 10.2.0.5
I would like to know if anybody has successfully installed 10.2.0.3 silently and then updated the 10.2.0.5 patch silently. If so, how did you do it?
Thanks in advance.

Is this for Win 2008 R1 or R2 ? If R2, see http://download.oracle.com/docs/cd/B19306_01/relnotes.102/b15680/toc.htm#BABEBBJF
HTH
Srini

Getting Administrative Priviledge error when trying to install Pro on 2008 Server

We are trying to install Adobe Pro 8 and recieve the error message that you have to be an administrator, i have tried using the local admin and the domain admin account...Please advise

We have no idea about your server's configuration or any of that nor should we. That aside you will have to work out your issues yourself. You are a) trying to install an Acrobat version from the stoneage on a relatively modern OS and b) generally Adobe desktop apps are not supported on any server operating system.
Mylenium

Unable to install KB2264107 on 2008 Server with SP2 X86 X64

Hi All,
Is there a reason why iam unable to install KB2264107 on sever 2008 with Sp2 ?
I tried installing the patch and iam getting This update does not apply to your computer
Any troubleshooting steps for finding the fix for the same would really help me
Thanks In Advance !

Hi All,
Is there a reason why iam unable to install KB2264107 on sever 2008 with Sp2 ?
I tried installing the patch and iam getting This update does not apply to your computer
Please let me know , this is really urgent
Thanks In Advance !
maybe you already have a newer version of NTDLL.DLL installed?
https://support.microsoft.com/en-us/kb/2264107
Don
(Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

Oracle 9i not installing on windows 2008 server

jrew.exe has stopped working

User,
Oracle 9iR2 was desupported on July 31,2007
Windows 2008 was released in 2008.
Oracle never (re-) certifies for new versions of any O/S
Please upgrade to Oracle 10gR2 (preferred) or downgrade your server to XP or 2003.
Sorry, but you have no other choice.
Sybrand Bakker
Senior Oracle DBA

How to Run Report on CrystalReport 2008 server?

Greetings,
I need to get a document that describe how to create a report, how to use the
old .rpt files from older version 8.5 to generate the same report.
I installed the CrystalReport 2008 server and have not able to find any area that describe
how to generate a report, the help menu index does have any things that say create report either.
Does create report engine come with 2008 server??
It has been hard to get any documents or assistance on this product.
Would you one be kindly provide some hints or direction to resolve my issues.
I am running CrystalReport 2008 Server on Windows 2003 release 2
Thanks much,
Y

Didnt get ur question fully.
U can schedule reports to a server using "schedule" cmd line parameter.
see docs [     Publishing reports to web - 10G ] to know fully syntax of this param
[    All Docs for all versions    ]
http://otn.oracle.com/documentation/reports.html
[     Publishing reports to web - 10G ]
http://download.oracle.com/docs/html/B10314_01/toc.htm (html)
http://download.oracle.com/docs/pdf/B10314_01.pdf (pdf)
[   Building reports - 10G ]
http://download.oracle.com/docs/pdf/B10602_01.pdf (pdf)
http://download.oracle.com/docs/html/B10602_01/toc.htm (html)
[   Forms Reports Integration whitepaper 9i/10g ]
9i - http://otn.oracle.com/products/forms/pdf/frm9isrw9i.pdf
10g - http://www.oracle.com/technology/products/forms/pdf/10g/frm10gsrw10g.pdf
http://www.oracle.com/technology/products/forms/techlisting10g.html
---------------------------------------------------------------------------------

Crystal Report 2008 Server - Windows AD authentication

We have installed Crystal Report 2008 Server and have created Administrator with Enterprise authentication. Using Administrator login, Windows AD-groups were mapped, none of the user from the defined group is able to login using InforView. Created Administrator using Windows-AD authentication, that user to is not able to login.
When tried LDAP authentication and mapped users, it's not working as well.
What needs to be done here? we need to get it done urgently.
Thanks,
Pradnya

I have a Windows 2008 Standard 32bit Server running CRS2008
I performed a default install with ONLY WACS. I have looked through every possible document I could find to get kerberos working and am still having trouble. The specific error I am getting when trying to logon to the CMC is:
Account Information Not Recognized: Active Directory Authentication failed to log you on. Please contact your system administrator to make sure you are a member of a valid mapped group and try again. If you are not a member of the default domain, enter your user name as UserName@DNS_DomainName, and then try again. (FWM 00006)
The AD group is mapped, I have followed every Kerberos setup document to the letter and still nada.
Any help would be greatly appreciated.
Chad

How to install a plugin on 64 bits windows 2008 server?

From the developer forum, I found a description which told me how to install a plugin on windows series system, but I only succeded intalling the plugin on 32 bits windows xp, couldn't install the plugin on 64 bits windows 2008 server. Any ideas or advices, men of genius? Thanks :-)

Please check if all your plugins are up-to-date. To do this, go to the [http://mozilla.com/plugincheck Mozilla Plugin Check site].
Once you're there, the site will check if all your plugins have the latest versions.
If you see plugins in the list that have a yellow ''Update'' button or a red ''Update now'' button, please update these immediately.
To do so, please click each red or yellow button. Then you should see a site that allows you to download the latest version. Double-click the downloaded file to start the installation and follow the steps mentioned in the installation procedure.

How to install Cisco Work 3.2 on Windows 2008 Server Standard R2

Hi Everyone,
I have got Cisco Works LAN Management 3.2. But the problem is that i have a Windows 2008 Server Standard R2 and when i try to install, it fails. What I read from the below link is that it supports
"Windows 2008 Server Standard and Enterprise Edition with Service Pack 1 and 2. Both 32-bit and 64-bit operating systems are supported on the above versions."
http://www.cisco.com/en/US/partner/prod/collateral/netmgtsw/ps6504/ps6528/ps2425/data_sheet_c78-534877.html
Please help me out on how i should install on the Windows 2008 Server Standard R2. If there is any patch or any other way out.
Awaiting your response.
Farid

Hi ,
LMS 3.2 is not supported on Windows 2008 Server Standard R2.
here is the supported platoform for LMS 3.2
http://www.cisco.com/en/US/docs/net_mgmt/ciscoworks_lan_management_solution/3.2/install/guide1/prereq.html#wp1110367
Thanks,
Gaganjeet

How to install IE8 on Windows Server 2008 R2 Datacenter?

Hello.
Can anybody tell me, how to install IE8 on 2008 R2 Datacenter?
I've downloaded this http://www.microsoft.com/en-us/download/internet-explorer-8-details.aspx for "Windows Server 2008 64-bit and more..", removed IE11, IE10, IE9 from installed updates, and runned "dism /online /disable-feature
/featurename:Internet-Explorer-Optional-amd64".
And nothing helps. I've got a message "Internet Explorer 8 is not supported on this operating system".

you can't "install" IE8 on WS2008R2, nor on Windows7 - because those OS's shipped with IE8.
IE is an OS component, and so when you "upgrade" or "downgrade" IE, you are affecting an OS component.
What this means is that the "IE8" download you are trying to apply, is actually IE8 for WinXP or maybe WinVista.
You can usually "downgrade" Win7 back to IE8, by uninstalling the newer "upgrade" of IE - this causes the OS to automatically attempt to revert to the prior IE version.
This reversion assumes/requires a healthy OS and component store (CBS), including all the pkgmgr file needed to revert to component.
Sometimes, the component store is damaged, or is missing files.
you may need to check the CBS logfiles, and may need to perform SFC /scannow
You may need to use CheckSUR to repair system health.
Don
(Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

BO XI 3.1 SP3 Install issue on Windows Server 2008 R2 64-bit

We are trying to install the lastest Build of Business Objects XI 3.1 SP3 on a new server with Windows Server 2008 R2 64-bit OS (51038908_part1.exe,51038908_part2.rar, 51038908_part3.rar).
The setup never finish! It seems that the setup can't validate the CMS installation and is trying again and again.
In the "Enterprise XI 3.1 SP3 - Windows - Supported Platforms" document, the Windows Server 2008 R2 Entreprise 64-bit Edition is supported.
The antivirus is desactivated and the setup.exe file was launched in the administrator mode.
Any ideas?
Edited by: Frederic Wojnarowski on Nov 22, 2010 5:45 PM

We have run into similar issues with that same package (51038908_part1.exe) which is a complete install of "BOE-3.1 package with SP3" for Windows 2008 Server that only installs in the 64-bit mode.
We had a 32-bit Oracle 10g client installed, that BOE did not recognize for the CMS - so the install was hanging at the CMS config...(no clear errors / no simple way to roll-back the failed install).
We only discovered the underlying Oracle issue when we deployed just the CMS with a local MySQL database - and then tried to point the CMS at the Oracle DB instead. It gave us TNS errors even though we could hit the same TNS without issue using SQL-PLUS on the same machine.
This lead us to assume that the 64-bit BOE couldn't connect via the 32-bit Oracle 10g drivers.
We have had trouble installing the 64-bit Oracle 10g client that we downloaded - so are now looking for some advice.
Anyone know which specific 64-bit Oracle 10g client should be used with the cumulative "BOE-3.1 package with SP3" 64-bit package (51038908_part1.exe)...?
I assume that this Oracle client will be used for any connection to the CMS / AUDIT Oracle databases - and any RPT content running on the CR-JobServers that is using an Oracle Native connection...?
Thanks in advance for the advice.

Windows 2008 Server R2 - Service Pack 1 Failed to install

A few nights ago I deployed Service Pack 1 for Windows 2008 Server R2 x64. The update failed to install after 3 attempts using the Windows Update manager. After the third time I checked the system properties which states that SP1 is
installed, yet it never appeared to install successfully as my other server machine had a prompt stating the SP was installed successfully.
In update history it shows the 3 failed attempts with no successes. This morning I began running into memory errors which are impacting my 2 VM Ware sessions which in turn lock up my virtual machine so I am going to attempt to remove and reinstall
to see if this corrects my issue. By the way what triggered the install of SP1 is random reboots of my server. This is that unknown Kernal Power Error which I have yet to resolve. Some months my server randomly reboots one time and other
months 4-5x. That is neither here nor there, the point of this discussion is to resolve SP1.
I have tried to remove SP1 by means of Control Panel, Programs and Features, Installed Updates. So it shows the that the SP1 installed in multiple areas yet in the install history no signs of successful installation.
When trying to uninstall from Program and Features/Installed Updates section in control panel it cycles through like its going to uninstall, but after several minutes I receive the following error      Windows Update
An error has occurred. Not all of the updates were successfully uninstalled.
When trying to uninstall from the command prompt (as administrator) "wusa.exe /uninstall /kb:976932" I get the following popup            Windows Update Standalone Installer
Installer encountered an error: 0x80073712       The component store has been corrupted.
Now if I try and install through the network installer file name "windows6.1-KB976932-X64.exe" I get "Windows Server 2008 R2 Service Pack 1 is already installed"
I performed these steps in the order mentioned which I came across this "System Update Readiness Tool for Windows Server 2008 R2 x64 Edition (KB947821) [February 2011]" After applying this hotfix I went through the same steps as mentioned above with the
exact same results.
It is unfortuante I did not come across this hotfix before I attempted install SP1 as it appears as if this would have prepared the system for SP1 installation. Currently I am in limbo with a corrupt installation of SP1 and so far no means of uninstalling
short of a reinstallation or repair of the OS which I am not willing to do at this point in time.
If anyone has any suggestions please chime in and let me know what I can try. Thanks for all the support and hopefully this post will help others in the future.

Maybe a little bit late, but I was running almost same problem on a exchange server.
Scenario:
First attempt to Update the windows patches - excluded the patches from the last 2 months.
I was kind a new to this, and didnt noticed that Windows Service pack must have at least 8GB free disk space.(Recommended)
So the C:\ partition had less then 5 GB free disk space, and I started the updates.
All went well until Windows SP1 begun running to downloading and installing.
When the installer noticed there wasnt enough space, It stopped, it give the status Failed, en when scaling up the C:\partition with another 10GB more space, the C:\partition had 18GB free disk space.
Tried to Call up a new attemp to install the SP1... but with no succes to start the SP1 installation...
I tried to reinstall but the windows update didnt get offered again to install again or resume or anything to try again...
Maybe...it is handy for Mickysoft, to check before installing, so the install wont get corrupted, and can install when c:\ partition has enough disk space.
What was the trick:
1) Stop the windows Update Service
2) C:\Windows\SoftwareDistribution\DataStore - Delete content
3) C:\Windows\SoftwareDistribution\Download - Delete content
4) Windows update Service check if its runs again
5) Check again for windows updates - Check if Windows Server Service pack 1 is offered, and install reboot and youre good to go.
It works for me :) hopefully after 3 years you had found a solution, but since I was poping for a solution and found this article with no solution.
I tought it will be hopefull for others to respond to this article with a solution.
Kind regards,
Alexander Tjintjelaar
Micky soft noob

Install quickbooks on 2008 server

Similar Messages

Maybe you are looking for