Install RAC OBS on single node using VMWare

Re: How to install Muti_node R12 using VMWARE
Mine is a little different.
I have the Test server which has OEL5 and one OAS 10g(Oracle application Server) with 10g database.
I want to install RAC OBS on this server by installing VMWare for the single node. I do not want to wipe out the OAS, reinstore OSL5 and start from a blank machine.
Can I keep what I have on the server and install RAC OBS by installing VMWare, configuring the virtual sharing disks, and install RAC OBS using ASM?

Hi,
Can I keep what I have on the server and install RAC OBS by installing VMWare, configuring the virtual sharing disks, and install RAC OBS using ASM?Yes, you can. Just make sure you have sufficient resources on this machine.
Note: 388577.1 - Using Oracle 10g Release 2 Real Application Clusters and Automatic Storage Management with Oracle E-Business Suite Release 12
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=388577.1
Regards,
Hussein

Similar Messages

Install 10gr2 ASM on single node, need clusterware installe first?

Install 10gr2 ASM on single node, Do I need install clusterware first?
When I install clusterware on single node, it shows " the specified nodes are not clusterable"
Thanks.

ASM and clusterware are two separate things. Clusterware is required only if you are setting up a RAC environment, is this your case? If you are just planning to use ASM then proceed with the RDBMS (database disk) install and use the DBCA to perform ASM configuration. It is assumed you have the raw devices ready to setup the ASM instance. Once the ASM instance is ready you can create the database to use the ASM disks.
~ Madrid
http://hrivera99.blogspot.com/

Cluster with one 2 Node RAC and a Single Instance using ASM

Hi there,
i am not sure with one planned installation and want to ask, weather i am on the right track.
Some Facts:
Clusterware 11g
ASM 11g
Database 10gR2
AIX 5.3
3 Machines
2 Storages DS4700
My Plan
On Node 1 and Node 2 we install a RAC Database for an ERP Software
On Node 3 we install a single Instance Database for a Logistic Software
So i will install on all three Nodes Clusterware and an 3 Instances ASM - Cluster
I create 2 Diskgroups, one for the FRA and one for the Data, both on Luns on the DS4700
The RAC-Database and the Logistic-Database are using the same Diskgroups.
Is this the way to go for this circumstances?
The alternative is, as far as i see
Clusterware on an 3 Servers
One 2 Node ASM for the ERP Software
one Single Node ASM for the Logistcs
4 Diskgroups, because of the 2 ASM-Database 2 for the RAC and 2 for the Single Instance.
Please give me some hints, which way i should prefer.
My tendence is going to the first alternative. I like the idea to share the Diskgroups over more than on Database because of easy administration.
The load of the 2 Databases are completly different, the logistc software will nearly do nothing compared to the ERP Software, so this should'nt be a problem.
But maybe i oversee something, so please do not hesitate to tell me, i am completly wrong ;)
Thanks a lot
Jörg

Chris Slattery wrote:
why clusterware on 3rd machine ?
I'd have separate DGs but that's just me.If you wish to install ASM you need OCS installed on the machine, even if it is just one node at all.
It is a kind of a dependency, no OCS, no ASM
cu
Jörg

Oracle RAC 10g on Solaris x86 using vmware

Guys,
I am practising 10g RAC installation on my laptop, wherein I have vmware workstation and
solaris-x86 version 10 installed on it.
I am trying to install Oracle 10g clusterware.
I have followed the steps for clusterware installation.
I am facing an errror on one of the node while running root.sh.
On the first node, the root.sh runs fine.
The following is the log.
bash-3.00# ./root.sh
WARNING: directory '/u01/app/oracle/product' is not owned by root
WARNING: directory '/u01/app/oracle' is not owned by root
WARNING: directory '/u01/app' is not owned by root
WARNING: directory '/u01' is not owned by root
Checking to see if Oracle CRS stack is already configured
Setting the permissions on OCR backup directory
Setting up NS directories
Oracle Cluster Registry configuration upgraded successfully
WARNING: directory '/u01/app/oracle/product' is not owned by root
WARNING: directory '/u01/app/oracle' is not owned by root
WARNING: directory '/u01/app' is not owned by root
WARNING: directory '/u01' is not owned by root
Successfully accumulated necessary OCR keys.
Using ports: CSS=49895 CRS=49896 EVMC=49898 and EVMR=49897.
node <nodenumber>: <nodename> <private interconnect name> <hostname>
node 1: xsan001 xsan001-priv xsan001
node 2: xsan002 xsan002-priv xsan002
Creating OCR keys for user 'root', privgrp 'root'..
Operation successful.
Now formatting voting device: /dev/rdsk/c0d0s4
Format of 1 voting devices complete.
Startup will be queued to init within 30 seconds.
Adding daemons to inittab
Expecting the CRS daemons to be up within 600 seconds.
CSS is active on these nodes.
xsan001
CSS is inactive on these nodes.
xsan002
Local node checking complete.
Run root.sh on remaining nodes to start CRS daemons.
=============================
On the second node, the root.sh gives error.
bash-3.00# ./root.sh
WARNING: directory '/u01/app/oracle/product' is not owned by root
WARNING: directory '/u01/app/oracle' is not owned by root
WARNING: directory '/u01/app' is not owned by root
WARNING: directory '/u01' is not owned by root
Checking to see if Oracle CRS stack is already configured
Setting the permissions on OCR backup directory
Setting up NS directories
Oracle Cluster Registry configuration upgraded successfully
WARNING: directory '/u01/app/oracle/product' is not owned by root
WARNING: directory '/u01/app/oracle' is not owned by root
WARNING: directory '/u01/app' is not owned by root
WARNING: directory '/u01' is not owned by root
Successfully accumulated necessary OCR keys.
Using ports: CSS=49895 CRS=49896 EVMC=49898 and EVMR=49897.
node <nodenumber>: <nodename> <private interconnect name> <hostname>
node 1: xsan001 xsan001-priv xsan001
node 2: xsan002 xsan002-priv xsan002
Creating OCR keys for user 'root', privgrp 'root'..
Operation successful.
Now formatting voting device: /dev/rdsk/c0d0s4
Format of 1 voting devices complete.
Startup will be queued to init within 30 seconds.
Adding daemons to inittab
Expecting the CRS daemons to be up within 600 seconds.
Failure at final check of Oracle CRS stack.
10
Can you provide some sort of clue what could be done to resolve the above error?

Refer to http://www.oracleracsig.org/ Under documents section select OS=Solaris. You will find a document on Oracle RAC on Solaris10 using Vmware.

Oracle RAC Installation on personal computer using VMWare

Please can you tell me the steps to Install Oracle 10g RAC using VMware in my personal computer which is a dual core processor and no Hardware RAID avaialable?

Hi,
It is many steps...
Windows
http://www.oracle-base.com/articles/10g/OracleDB10gR2RACInstallationOnWindows2003UsingVMware.php
Linux
http://www.oracle-base.com/articles/10g/OracleDB10gR2RACInstallationOnCentos4UsingVMware.php
That is basic installation in production is different eg.
put CRS_HOME in place where root is owner of parent directory, apply patchset after every component eg. install crs and then patch crs, instal asm then patch asm ....
you have to patch crs because of UNKNOWN statuses
Regards

How to clone RAC Instance to Single Node Instance??

Hi
I have a Multi Node R12.0.4 Installation based on RAC, and i want to clone all the application on Multi Node but on single database.
Can any one guide me how to performe this??
Thanks
Mohamed

Hi;
In addition to Hussein Sawwan great post also check
RAC -> NON RAC ebiz clone << this post for r11 but i belive it applicable for R12 too
Hope it helps
Regard
Helios

Has anybody tried to install RAC on Zones as nodes ?

Hi guys,
Could anyone share his experiences about installing Oracle RAC
on Solaris zones located on single physical machine ?
I created 2 sparse root zones , presented the same raw devices for ocr and votedisk to them and try to install clusterware,
but during clusterware initialization there is an error
OCROSD[1]utsz:3: ioctl DKIOCGAPART failed. errno 48
Does anybody tried similar configuration ?

I have not tried this since it is explicitly unsupported by oracle.
Bjoern

Load balancing on rac database with single node appsTier

Hi,
Please advice me, I am working on to configure load balancing on appstier, following is my setup and steps I did so far.
Host name      Services
Clelx062ptlge --     Rac 1 – only database
Clelx063ptlge --     Rac 2 – only database
Clelx042ptlge --     All apps services including concurrent managers
I have two R12 database(UDEV -- development & HRQA -- UAT), I only made changes in apps tier xml file of udev for some load balancing parameters, following are the changes I did.
*<TWO_TASK oa_var="s_tools_twotask" osd="unix"> udev_806_BALANCE </TWO_TASK>*
*<CP_TWOTASK oa_var="s_cp_twotask" customized="yes">udev_806_BALANCE</CP_TWOTASK>*
*<TWO_TASK oa_var="s_weboh_twotask" osd="unix"> udev_BALANCE </TWO_TASK>*
I changed the values from "UDEV" to given above value. After the above change I ran autoconfig. Then Concurrent managers and forms services are not automatically getting failover to second database node, I need to bounce services to fail it back to other available Rac node. Please note that we have only one appsTier
Thanks,
Tanveer Mohammed.

Hi,
Yes, i have checked the doc referenced, and already did the steps given in the doc. Also i did all the steps given into ID 388577.1 but still Concurrent managers and forms services are not automatically getting failover to second database node, I need to bounce services to fail it back to other available Rac node.
Please advice...
Thanks,
Tanveer Mohammed.

Moving RAC/ASM to single-node non-rac SET NEWNAME not working

Good morning,
I'm trying to restore a rac/asm database to a non-rac environment to simulate disaster recovery under worst-case circumstances.
Here is as faras I have been able to get
1) Restored pfile
2) modified pfile to remove references to RAC settings (note, did not set db_file_create_dest, db_file_name_convert, etc)
3) Restored controlfile successfully
4) Mounted database
At this time I run the following rman script which covers all temp and datafiles (there's some skipped numbers where datafiles have been removed previously)
run {
set until time "to_date('2009/11/29 03:00:00','YYYY/MM/DD HH24:MI:SS')";
set newname for tempfile 1 to '/mnt/data/oradata/pmi/temp_1.dbf';
set newname for datafile 1 to '/mnt/data/oradata/pmi/system_1.dbf';
set newname for datafile 2 to '/mnt/data/oradata/pmi/undotbs1_2.dbf';
set newname for datafile 3 to '/mnt/data/oradata/pmi/sysaux_3.dbf';
set newname for datafile 4 to '/mnt/data/oradata/pmi/undotbs2_4.dbf';
set newname for datafile 5 to '/mnt/data/oradata/pmi/undotbs3_5.dbf';
set newname for datafile 6 to '/mnt/data/oradata/pmi/users_6.dbf';
set newname for datafile 7 to '/mnt/data/oradata/pmi/atend1_7.dbf';
set newname for datafile 8 to '/mnt/data/oradata/pmi/atendidx1_8.dbf';
set newname for datafile 9 to '/mnt/data/oradata/pmi/cwmlite_9.dbf';
set newname for datafile 10 to '/mnt/data/oradata/pmi/datafeedsidx1_10.dbf';
set newname for datafile 11 to '/mnt/data/oradata/pmi/drsys_11.dbf';
set newname for datafile 12 to '/mnt/data/oradata/pmi/dynamic1_12.dbf';
set newname for datafile 13 to '/mnt/data/oradata/pmi/dynamicidx1_13.dbf';
set newname for datafile 14 to '/mnt/data/oradata/pmi/intermedia_14.dbf';
set newname for datafile 15 to '/mnt/data/oradata/pmi/notesidx1_15.dbf';
set newname for datafile 16 to '/mnt/data/oradata/pmi/odm_16.dbf';
set newname for datafile 18 to '/mnt/data/oradata/pmi/pacific_data_large_18.dbf';
set newname for datafile 19 to '/mnt/data/oradata/pmi/pacific_data_medium_19.dbf';
set newname for datafile 20 to '/mnt/data/oradata/pmi/pacific_data_small_20.dbf';
set newname for datafile 21 to '/mnt/data/oradata/pmi/pacific_data_xlarge_21.dbf';
set newname for datafile 22 to '/mnt/data/oradata/pmi/pacific_index_large_22.dbf';
set newname for datafile 23 to '/mnt/data/oradata/pmi/pacific_index_medium_23.dbf';
set newname for datafile 24 to '/mnt/data/oradata/pmi/pacific_index_small_24.dbf';
set newname for datafile 25 to '/mnt/data/oradata/pmi/pacific_index_xlarge_25.dbf';
set newname for datafile 26 to '/mnt/data/oradata/pmi/pmi_data_large_26.dbf';
set newname for datafile 27 to '/mnt/data/oradata/pmi/pmi_data_medium_27.dbf';
set newname for datafile 28 to '/mnt/data/oradata/pmi/pmi_data_small_28.dbf';
set newname for datafile 29 to '/mnt/data/oradata/pmi/pmi_data_large_29.dbf';
set newname for datafile 30 to '/mnt/data/oradata/pmi/sysaux_30.dbf';
set newname for datafile 31 to '/mnt/data/oradata/pmi/pmi_data_xlarge_31.dbf';
set newname for datafile 32 to '/mnt/data/oradata/pmi/pmi_index_large_32.dbf';
set newname for datafile 33 to '/mnt/data/oradata/pmi/pmi_data_medium_33.dbf';
set newname for datafile 34 to '/mnt/data/oradata/pmi/pmi_index_medium_34.dbf';
set newname for datafile 35 to '/mnt/data/oradata/pmi/pmi_index_small_35.dbf';
set newname for datafile 36 to '/mnt/data/oradata/pmi/pmi_index_xlarge_36.dbf';
set newname for datafile 38 to '/mnt/data/oradata/pmi/portal30_38.dbf';
set newname for datafile 39 to '/mnt/data/oradata/pmi/portal_app_helpdesk_39.dbf';
set newname for datafile 40 to '/mnt/data/oradata/pmi/static1_40.dbf';
set newname for datafile 41 to '/mnt/data/oradata/pmi/staticidx1_41.dbf';
set newname for datafile 42 to '/mnt/data/oradata/pmi/tools_42.dbf';
set newname for datafile 43 to '/mnt/data/oradata/pmi/xdb_43.dbf';
set newname for datafile 44 to '/mnt/data/oradata/pmi/pmi_index_small_44.dbf';
set newname for datafile 46 to '/mnt/data/oradata/pmi/pmi_index_medium_46.dbf';
set newname for datafile 47 to '/mnt/data/oradata/pmi/pmi_data_small_47.dbf';
set newname for datafile 48 to '/mnt/data/oradata/pmi/pmi_index_large_48.dbf';
set newname for datafile 49 to '/mnt/data/oradata/pmi/pmi_index_xlarge_49.dbf';
set newname for datafile 50 to '/mnt/data/oradata/pmi/system_50.dbf';
set newname for datafile 52 to '/mnt/data/oradata/pmi/pmi_data_xlarge_52.dbf';
set newname for datafile 54 to '/mnt/data/oradata/pmi/pmi_index_medium_54.dbf';
set newname for datafile 55 to '/mnt/data/oradata/pmi/acctdb_data_55.dbf';
set newname for datafile 56 to '/mnt/data/oradata/pmi/acctdb_index_56.dbf';
set newname for datafile 57 to '/mnt/data/oradata/pmi/pivot_data_57.dbf';
set newname for datafile 58 to '/mnt/data/oradata/pmi/pmiaudit_data_58.dbf';
set newname for datafile 59 to '/mnt/data/oradata/pmi/pmiaudit_indx_59.dbf';
allocate channel D1 device type disk;
restore database;
switch datafile all;
release channel D1;
When I run this I get the following:
creating datafile fno=3 name=/mnt/data/oradata/pmi/sysaux_3.dbf
released channel: D1
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of restore command at 12/09/2009 09:32:33
ORA-01119: error in creating database file '+PMI2'
ORA-17502: ksfdcre:4 Failed to create file +PMI2
ORA-15001: diskgroup "PMI2" does not exist or is not mounted
ORA-15077: could not locate ASM instance serving a required diskgroup
ORA-29701: unable to connect to Cluster Manager
I noticed that it's trying to create the datafile. Shouldn't it be giving me a "Restoring datafiles from backup piece" clause? Also it appears to be trying to recreate the datafiles in their old location. Any thoughts on how to get around this.
Using the db_file_name_convert does allow me to restore files to the filesystem, but they use names such as "omf_*" and I'm not sure if it's converting the files properly from ASM format.
Thanks!

Hi,
I assume your problem is either in your pfile ( but you indicate you have removed all RAC settings), or in your control file.
I would recommend to remove the control files and create them later as soon as the datafiles have been restored, using the commands:
STARTUP NOMOUNT
CREATE CONTROLFILE REUSE DATABASE "OMST01" NORESETLOGS FORCE LOGGING NOARCHIVELOG
-- SET STANDBY TO MAXIMIZE PERFORMANCE
MAXLOGFILES 100
MAXLOGMEMBERS 2
MAXDATAFILES 1024
MAXINSTANCES 8
MAXLOGHISTORY 10210
LOGFILE
< your logfiles >
DATAFILE
< your datafiles >
CHARACTER SET <your character set>;So the steps are
Startup nomount with the pfile
Restore the datafiles using rman
Shutdown the database
Use above script to create the control files
It is possible you need to use the RESETLOGS option instead of the NORESETLOGS
HTH

How to install Muti_node R12 using VMWARE

Hi,
Any one have experience on R12 with Linux installing multi node using vmware ,Please let me know, i know single node installation on VMWARE WORK STATION,
Thanks

I got this multi node installation procedure from blog,
http://skrajend.blogspot.com/2007_06_01_archive.html
R12 MultiNode Installation with VMWare
Have only one node , don't worry still you can have enjoy R12 MultiNode Installation with VMWare.
I will share my experience here with all on how to setup R12 in a single node first and then add another Middle Tier.
Setup Requirement : Node with atleast 1 GB of Ram and 80GB of HardDisk , OS Dump , R12 Dump and VMWare Software
Download a Copy of VMWare WorkStation from http://www.vmware.com/download/ws/ for Linux
You will need an evaluation key
http://www.vmware.com/vmwarestore/newstore/wkst_eval_login.jsp , make sure you have the key before you start the Installation.
I downloaded an Image of Redhat Linux RHEL4-U4-i386-ES
Linux Node Setup Information:
1. Install OS Image on to the Box
2. Name the host , say r12lab01.r12.com and assign a static IP
3. Make sure you have all the latest RPM's in place. For more info refer R12 OS Pre-requisite Notes.
4. Open a VNC Server as Root
5. Download the VMWare RPM Package "VMware-workstation-5.5.3-34685.i386.rpm"
6. Install the RPM Package
7. Configure VMWare using "http://www.vmware.com/support/ws5/doc/ws_install_linux.html"
8. Start VMware Workstation ( /usr/bin/vmware )
9. Enter your serial number.
10. Create a virtual machine using the New Virtual Machine Wizard.
( ref : http://www.vmware.com/support/ws5/doc/newguest_ws.html )
11. Install a guest operating system in the new virtual machine.
You need the installation media CD-ROM for your guest operating system
12. Name the New Virtual Host as r12lab02.r12.com and assign a static IP
13. Make sure that you can communicate between first and the second node.
I am struck up here, can you explain me how to do this,
14. Power Off the Node and Start Fresh , make sure you have no OS Issues.
15. Keep the VNC Session Active. ( If you loose it , your will not have the new node )
R12 Setup Information:
1. Download Dump of R12 from http://edelivery.oracle.com
2. Stage them on the Hard Disk( I did not include the space requirement of the Dump above)
3. Run a Single Node Installation
4. Make sure that the Installation Completed Normal and all the Service are Up and Running.
5. Perform a Complete Health Check.
Adding a Node to the Existing Setup:
1. Power on the Second Node
2. Mount the R12 Mount Points on the Second Node.
i tried in VMware environment, but i am not able to mount the mount points,
3. cd /home1/aptest/test/apps/apps_st/comn/clone/bin/
4. perl adclonectx.pl addnode contextfile=TEST_r12lab01.xml
Target hostname (virtual or normal) [r12lab02]:
5. Make sure that the above process generate the Secondary Node's Context File
6. Make the Service Enabled that you want to run on the Second Node.
Initially have web service configured and later modify according to your need.
7. Move into AD_TOP/bin and run adconfig.sh , context_file=TEST_r12lab01.xml
8. Make sure that Autoconfig Complete's Normal.
9. Source the Environment File
10. Start the Service on the Seconday Node
11. Navigate to OAM and verify that you have the Second Node.
Edited by: HumanDBA on Apr 27, 2009 7:51 AM

How to install RAC for a exist single database

Hi Friends,
We will install RAC for exist single Oracle10GR4 in 32 bit window 2003 server
DOes any experts have experience for build a RAC for exist 10GDB?
So we only need to install Oracle Clusterware and does not need to install DB.
Just configured RAC.
Is it true?
Thanks for help
Jim

Hi,
Yes it's true.Go thru the links below:
http://download.oracle.com/docs/cd/B19306_01/server.102/b25159/migrate.htm
http://www.oracle.com/technology/pub/articles/chan_sing2rac_install.html
Also you can use "rconfig" tool given in Oracle 10gR2 specially for this puprose.
Gud Luck!!
Vijay Shanker
Edited by: Vijay Shanker on Feb 19, 2009 12:46 AM
Edited by: Vijay Shanker on Feb 19, 2009 12:59 AM
Edited by: Vijay Shanker on Feb 19, 2009 1:01 AM

GI installation on a single-node cluster error.

Hello, I am trying to install GI on a single-node cluster (Solaris 10 / Sparc) but the root.sh script fails with the following error (this is not a GI installation for a Standalone Server :
root@selvac./dev/ASM/OCRVTD_DG # /app/oracle/grid/11.2/root.sh
Running Oracle 11g root script...
The following environment variables are set as:
ORACLE_OWNER= grid
ORACLE_HOME= /app/oracle/grid/11.2
Enter the full pathname of the local bin directory: [usr/local/bin]:
Copying dbhome to /usr/local/bin ...
Copying oraenv to /usr/local/bin ...
Copying coraenv to /usr/local/bin ...
Creating /var/opt/oracle/oratab file...
Entries will be added to the /var/opt/oracle/oratab file as needed by
Database Configuration Assistant when a database is created
Finished running generic part of root script.
Now product-specific root actions will be performed.
Using configuration parameter file: /app/oracle/grid/11.2/crs/install/crsconfig_params
Creating trace directory
LOCAL ADD MODE
Creating OCR keys for user 'root', privgrp 'root'..
Operation successful.
OLR initialization - successful
root wallet
root wallet cert
root cert export
peer wallet
profile reader wallet
pa wallet
peer wallet keys
pa wallet keys
peer cert request
pa cert request
peer cert
pa cert
peer root cert TP
profile reader root cert TP
pa root cert TP
peer pa cert TP
pa peer cert TP
profile reader pa cert TP
profile reader peer cert TP
peer user cert
pa user cert
Adding daemon to inittab
ACFS-9200: Supported
ACFS-9300: ADVM/ACFS distribution files found.
ACFS-9312: Existing ADVM/ACFS installation detected.
ACFS-9314: Removing previous ADVM/ACFS installation.
ACFS-9315: Previous ADVM/ACFS components successfully removed.
ACFS-9307: Installing requested ADVM/ACFS software.
ACFS-9308: Loading installed ADVM/ACFS drivers.
ACFS-9327: Verifying ADVM/ACFS devices.
ACFS-9309: ADVM/ACFS installation correctness verified.
CRS-2672: Attempting to start 'ora.mdnsd' on 'selvac'
CRS-2676: Start of 'ora.mdnsd' on 'selvac' succeeded
CRS-2672: Attempting to start 'ora.gpnpd' on 'selvac'
CRS-2676: Start of 'ora.gpnpd' on 'selvac' succeeded
CRS-2672: Attempting to start 'ora.cssdmonitor' on 'selvac'
CRS-2672: Attempting to start 'ora.gipcd' on 'selvac'
CRS-2676: Start of 'ora.cssdmonitor' on 'selvac' succeeded
CRS-2676: Start of 'ora.gipcd' on 'selvac' succeeded
CRS-2672: Attempting to start 'ora.cssd' on 'selvac'
CRS-2672: Attempting to start 'ora.diskmon' on 'selvac'
CRS-2676: Start of 'ora.diskmon' on 'selvac' succeeded
CRS-2676: Start of 'ora.cssd' on 'selvac' succeeded
ASM created and started successfully.
Disk Group OCRVTD_DG created successfully.
The ora.asm resource is not ONLINE
Did not succssfully configure and start ASM at /app/oracle/grid/11.2/crs/install/crsconfig_lib.pm line 6465.
/app/oracle/grid/11.2/perl/bin/perl -I/app/oracle/grid/11.2/perl/lib -I/app/oracle/grid/11.2/crs/install /app/oracle/grid/11.2/crs/install/rootcrs.pl execution failed
I also found the "PRVF-5150: Path OCRL:DISK1 is not a valid path on all nodes" error but as I have read it is a bug I Ignored it. But...
I think my ASM_DG OCR and voting is ok, accessible by grid user and 660. It seems ASM does not start or does not start in time.
Any help is wellcome.
Thanks in advance.

Thanks a lot for the hint. I had already checked this doc. but I think it is not the problem. Actually de error ora.asm is not online is not correct. After failing root.sh, ora.asm is ONLINE:
root@selvac./app/oracle/grid/11.2/bin # ./crsctl check resource ora.asm -init
root@selvac./app/oracle/grid/11.2/bin # ./crsctl stat resource ora.asm -init
NAME=ora.asm
TYPE=ora.asm.type
TARGET=ONLINE
STATE=ONLINE on selvac
The last part of the /app/oracle/grid/11.2/cfgtoollogs/crsconfig/rootcrs_selvac.log file reads :
>
ASM created and started successfully.
Disk Group OCRVTD_DG created successfully.
End Command output2011-04-14 13:24:16: Executing cmd: /app/oracle/grid/11.2/bin/crsctl check resource ora.asm -init
2011-04-14 13:24:17: Executing cmd: /app/oracle/grid/11.2/bin/crsctl status resource ora.asm -init
2011-04-14 13:24:17: Command output:
NAME=ora.asm
TYPE=ora.asm.type
TARGET=ONLINE
STATE=OFFLINE
End Command output2011-04-14 13:24:17: Checking the status of ora.asm
2011-04-14 13:24:22: Executing cmd: /app/oracle/grid/11.2/bin/crsctl status resource ora.asm -init
2011-04-14 13:24:22: Command output:
NAME=ora.asm
TYPE=ora.asm.type
TARGET=ONLINE
STATE=OFFLINE
End Command output2011-04-14 13:24:22: Checking the status of ora.asm
2011-04-14 13:24:27: Executing cmd: /app/oracle/grid/11.2/bin/crsctl status resource ora.asm -init
2011-04-14 13:24:28: Command output:
NAME=ora.asm
TYPE=ora.asm.type
TARGET=ONLINE
STATE=OFFLINE
End Command output2011-04-14 13:24:28: Checking the status of ora.asm
2011-04-14 13:24:33: Executing cmd: /app/oracle/grid/11.2/bin/crsctl status resource ora.asm -init
2011-04-14 13:24:33: Command output:
NAME=ora.asm
TYPE=ora.asm.type
TARGET=ONLINE
STATE=OFFLINE
End Command output2011-04-14 13:24:33: Checking the status of ora.asm
2011-04-14 13:24:38: Executing cmd: /app/oracle/grid/11.2/bin/crsctl status resource ora.asm -init
2011-04-14 13:24:38: Command output:
NAME=ora.asm
TYPE=ora.asm.type
TARGET=ONLINE
STATE=OFFLINE
End Command output2011-04-14 13:24:38: Checking the status of ora.asm
2011-04-14 13:24:43: Executing cmd: /app/oracle/grid/11.2/bin/crsctl status resource ora.asm -init
2011-04-14 13:24:43: Command output:
NAME=ora.asm
TYPE=ora.asm.type
TARGET=ONLINE
STATE=OFFLINE
End Command output2011-04-14 13:24:43: Checking the status of ora.asm
2011-04-14 13:24:48: Executing cmd: /app/oracle/grid/11.2/bin/crsctl status resource ora.asm -init
2011-04-14 13:24:49: Command output:
NAME=ora.asm
TYPE=ora.asm.type
TARGET=ONLINE
STATE=OFFLINE
End Command output2011-04-14 13:24:49: Checking the status of ora.asm
2011-04-14 13:24:54: Executing cmd: /app/oracle/grid/11.2/bin/crsctl status resource ora.asm -init
2011-04-14 13:24:54: Command output:
NAME=ora.asm
TYPE=ora.asm.type
TARGET=ONLINE
STATE=OFFLINE
End Command output2011-04-14 13:24:54: Checking the status of ora.asm
2011-04-14 13:24:59: Executing cmd: /app/oracle/grid/11.2/bin/crsctl status resource ora.asm -init
2011-04-14 13:24:59: Command output:
NAME=ora.asm
TYPE=ora.asm.type
TARGET=ONLINE
STATE=OFFLINE
End Command output2011-04-14 13:24:59: Checking the status of ora.asm
2011-04-14 13:25:04: Executing cmd: /app/oracle/grid/11.2/bin/crsctl status resource ora.asm -init
2011-04-14 13:25:04: Command output:
NAME=ora.asm
TYPE=ora.asm.type
TARGET=ONLINE
STATE=OFFLINE
End Command output2011-04-14 13:25:04: Checking the status of ora.asm
2011-04-14 13:25:09: The ora.asm resource is not ONLINE
2011-04-14 13:25:09: Running as user grid: /app/oracle/grid/11.2/bin/cluutil -ckpt -oraclebase /app/grid -writeckpt -name ROOTCRS_BOOTCFG -state FAIL
2011-04-14 13:25:09: s_run_as_user2: Running /bin/su grid -c ' /app/oracle/grid/11.2/bin/cluutil -ckpt -oraclebase /app/grid -writeckpt -name ROOTCRS_BOOTCFG -state FAIL '
2011-04-14 13:25:10: Removing file /var/tmp/mbahSaGPn
2011-04-14 13:25:10: Successfully removed file: /var/tmp/mbahSaGPn
2011-04-14 13:25:10: /bin/su successfully executed
2011-04-14 13:25:10: Succeeded in writing the checkpoint:'ROOTCRS_BOOTCFG' with status:FAIL
2011-04-14 13:25:10: ###### Begin DIE Stack Trace ######
2011-04-14 13:25:10: Package File Line Calling
2011-04-14 13:25:10: --------------- -------------------- ---- ----------
2011-04-14 13:25:10: 1: main rootcrs.pl 322 crsconfig_lib::dietrap
2011-04-14 13:25:10: 2: crsconfig_lib crsconfig_lib.pm 6465 main::__ANON__
2011-04-14 13:25:10: 3: crsconfig_lib crsconfig_lib.pm 6390 crsconfig_lib::perform_initial_config
2011-04-14 13:25:10: 4: main rootcrs.pl 671 crsconfig_lib::perform_init_config
2011-04-14 13:25:10: ####### End DIE Stack Trace #######
2011-04-14 13:25:10: 'ROOTCRS_BOOTCFG' checkpoint has failed
So this must be a bug. During root.sh execution ora.asm is OFFLINE but after failing it is ONLINE. It maight be a question of waiting/repeating or timeout as I see the "Checking the status of ora.asm" command is repeated several times during root.sh, but not enough perhaps. Now root.sh is failed, installation halted but ASM is ONLINE.
Any other Idea?
Thanks again.

How to install RAC Clusterware

Hi ,
i need to install RAC on 2 nodes with details below ,
Database : Oracle 10g R2
O/S : REHL 5
Servers: HP ProLiant DL380 G7 E5640 1P 6GB-R P410i/256 8 SFF 460w
is there any simple guide to start install RAC on my environmet ?

use jeff hunter guide..
Building an Inexpensive Oracle RAC 10g R2 on Linux - (RHEL 5.3 / iSCSI)
this is really simple tutorial for RAC 10g R2

How to install oracle RAC 11g on oracle linux 5 using vmware workstation ?

Hello;
I need to Install Oracle RAC 11g R2 with database 11g ( 2 nodes ) but by using vmware workstation ( not server 2) on oracle linux 5-6 .
So any document can help me please ..
regards.

http://www.oracle-base.com/articles/11g/oracle-db-11gr2-rac-installation-on-ol5-using-vmware-server-2.php
http://appsdbaworkshop.blogspot.in/2011/10/11gr2-rac-on-linux-56-using-vmware.html
http://robertgfreeman.blogspot.in/2009/12/11gr2-rac-on-vmware-part-one.html

Installing Oracle 10g rac on linux 4 using vmware :problem

Hi Expert ,
I'm facing problem on installing oracle 10g rac on centos 4x using vmware, installation is showing errors . The command failed are oifcfg, cluvfy
on running ./cluvfy stage -post crsinst -n rac1,rac2
error:
OCR integrity found invalid for rac1
OCR integrity found invalid for rac2
Please advice...
regards,
Shaan

hi Experts,
orccheck failed for one of the node, can you please suggest what needs to be done now..
filename :/dev/raw/raw1
error "device/file integrity check failed"
error "device not configured"
Regards
Message was edited by:
Shaan_dmp

Install RAC OBS on single node using VMWare

Similar Messages

Maybe you are looking for