Install RAM in pairs but from two different manufactures?

I was wondering if anyone could tell me if there may be any issues with installing RAM in pairs in my PMG5 from two different manufactures. Any feedback is greatly appreciated. Thanks!

Sometimes there has been, because not all RAM from even the same vendor is 100% identical from batch to batch. It should or might, but there are variations in timing, voltage which have in the past caused problems, mostly when a new revision or model comes out though.
When in doubt, check with reputable sites like
http://www.crucial.com/mac/ etc. and compare.

Similar Messages

I want to order prints from two different albums but don't want to pay shipping twice?

I want to order prints from two different albums but don't want to pay shipping twice- How do I do this?

Select all the photos in both albums and order - or make a temp album containing all photos you want to order prints of and select all and order
The easiest way is the second suggestion -- make a temp album containing all of the photos and select all
LN

HT5622 my stepdad used to use my phone and the imessage accounts have now joined together by mistake we don't know how it happened but is there a way we can separate the two accounts because we are able to read messages that are coming from two different

hello can i please get some help, my stepdad used to use my phone a while ago, i deleted his old account from my phone, last night out IMessages merged without us knowing how it happened, he is able to read any messages that are coming into my phone through IMessage and also i am able to read his and this is happen from two different phone, i dont know how to fix this or two separate the two accounts, is anyone able to help please

Settings>Messages Send and Receive should only have the phone number and addresses checked that you want reaching that individual devices If your step-dads number and email are checked just tap them it will remove the check.

Downloading songs from two different computers, and not recognizing songs

On my home computer, I downloaded about 40 songs onto my IPod from CDs. Then, I installed the program on my work computer, and purchased four songs from ITunes. When I plug my IPod into my work computer, it is not recognizing the songs I downloaded from my home computer. However, if I plug my IPod into my work computer, I can listen to these four purchased songs, but once I try to listen to them without having it plugged into my work computer, only the songs I downloaded from home are on the IPod.
Has this happened to anyone else who has tried to put songs from two different computers onto their IPod?

Just to elaborate a bit, you need to copy the purchased files and put them on your home computer.
Don't burn them as an audio CD as you will lose quality when you re-import them.
You can use the Shuffle (instead of a CD) to do this
Check out this link.
http://docs.info.apple.com/article.html?artnum=61131

HT204053 can I purchase from two different stores ie store in New Zealand and Store in Australia and how do I sync updates on applications? Do I have to switch ID's in my settings each time or is there an easier way.

can I purchase from two different stores ie store in New Zealand and Store in Australia and how do I sync updates on applications purchased from either store? Do I have to switch ID's in my settings each time or is there an easier way. The trouble is I set up my appleid in new Zealand and so all icloud and itunes and app stores are under New Zealand Apple ID I have since moved to Australia. Im a real beginner at this stuff so bare with me pse.

I'm in the same boat as you -- except that I manage both a school lab (volunteer job) and macs in the enterprise (pay job). What I think we need is the Education Volume Purchasing Program
http://www.apple.com/education/volume-purchase-program/faq.html
Unfortunately this all seems a little rough around the edges -- for example, I have found updates for AppStore apps on the support.apple.com updates download site, but then when I install them via ARD they don't actually update the software. (The AppStore icons still show as needing the updates, and the version info reports the old version.) The documentation is also vague about which AppleID to use in which circumstance. I think they just haven't finished thinking through the implications of the various procedures and policies upon the various kinds of customers. When we deployed Mountain Lion on the school lab, we made an install usb and went around and installed it on each computer -- and it appears that you are on the honor system as far as paying for all of the licenses that you install. We did! But they appear to have no way to enforce it.
So far, I have only deployed 9 Lion macs in my day job, and our "solution" to the AppStore showing updates problem has been to drag the AppStore icon off of the users' docks so they don't see them!

APEX Application accessing data from two different databases

Hi All,
Currently as we all know that APEX Application resides in database and is connected to the schema of that database.
I want APEX Application to be running and accessing data from two different databases. Elaborating my question,
Currently, my APEX Production Application is connected with XXXX Schema of DB1 Database(Where APEX Resides). Now I want to add some pages into this APEX Application for REPORT Purpose, But I want to connect this REPORT APEX Pages to get data from Different Schema YYYY for Database DB2.
Is it possible to configure this scenario?
The reason for doing this is to avoid the REPORT related (adhoc queries) resource utilization effect on Production DB1 Database.
Thanks
Nil

1. If you do the joining of two or more tables in DB1 then all data is pulled over to DB1 and then the join is executed: so more data over the databaselink and more work for DB1. Better keep the joining stuff where the data resides and just pull exactly that data over that you need.
2. Don't know about your different block sizes. Seems a nice question for one of the other forums (DBA or SQL).
3. I mean create synonyms on DB1 for reports VIEWS in DB2.
Hope all is clear!

How to create a foreign key for the table from two different tables?

Hi All,
I have a three table like below. In the below table SAMPLE_CONS_CHECK and SAMPLE_CONS2_CHECK will be having the primary key for NAME column. The same SAMPLE_CONS3_CHECK table also having the primary key for NAME column and forieign key for SAMPLE_CONS_CHECK and SAMPLE_CONS2_CHECK tables. See the below code 2
code 1:
CREATE TABLE SAMPLE_CONS_CHECK
        (NAME VARCHAR2(10),
        SERIES VARCHAR2(5)
CREATE TABLE SAMPLE_CONS2_CHECK
        (NAME VARCHAR2(5),
         MODEL NUMBER
CREATE TABLE SAMPLE_CONS3_CHECK
        (NAME VARCHAR2(5),
         MODEL_NO NUMBER
        )code 2
alter table SAMPLE_CONS_CHECK
add constraint SAMPLE_CONS_CHECK_pk primary key (NAME)
alter table SAMPLE_CONS2_CHECK
add constraint SAMPLE_CONS2_CHECK_pk primary key (NAME)
alter table SAMPLE_CONS3_CHECK
add constraint SAMPLE_CONS3_CHECK_pk primary key (NAME)
ALTER TABLE SAMPLE_CONS3_CHECK ADD
CONSTRAINT SAMPLE_CONS3_CHECK_FK1 FOREIGN KEY
     NAME
) REFERENCES SAMPLE_CONS_CHECK
    NAME
) ON DELETE CASCADE;
ALTER TABLE SAMPLE_CONS3_CHECK ADD
CONSTRAINT SAMPLE_CONS3_CHECK_FK2 FOREIGN KEY
     NAME
) REFERENCES SAMPLE_CONS2_CHECK
    NAME
) ON DELETE CASCADE;From the above schenario i am able to insert the data to SAMPLE_CONS3_CHECK table. But the parent data is already available in the parent table. The problem is here two different constarints from two different tables. While inserting, it is checking from both the tables whether the parent is exist or not.
How can i solve this problem? Can anyone halp me about this?
Thanks
Edited by: orasuriya on Aug 8, 2009 2:02 AM

Actually the design is completely incorrect.
What you say is
I have
'foo', 'foo series'
'foo','foo model'
'foo',666
By virtue of table3 referring to both table1 and table2.
This means you actually need to have 1 (one) table:
'foo','foo series','foo model', 666
And the 'problem' disappears.
Sybrand Bakker
Senior Oracle DBA

How to create Analysis from two different subject areas with diff models

Hello,
I have problem with create analysis from two different areas with two different models (Model Star and Snowflakes) build in BI Admin tools.
First Model A = Subject Area A have one fact tables (with measures) and three dimensions tables (Model Star)
Second Model B = Subject Area B have one fact table (no measures) and five dimensions tables (Model Snowflakes).
I'm looking solutions how I can give good results. In this case I can't use UNION, INTERSECT etc., because this models haven't the same number column and data type?
whether it is possible to do in OBIEE?
Please help me
Kind regard
robix

Hi
One thing to understand is that if your are imagining having two Subject Areas (SAs) displayed and then dragging columns from each into your Request without any preparation, then no, that can't be done. You would need to do a join in the BMM layer and expose the column from the second Subject Area in the presentation layer.
But if you indeed interested in UNION (or intersect) queries, then do this:
Build your first query in the first SA in the usual manner. Note the number of columns and the data types of each column.
Now at the bottom of the Criteria workspace, there is a button called "Combine with similar request." Click it.
Select your second SA. You will note that the outlines of the columns in your first query appear. This is to remind you that the number of columns in this second query must be the same as in the first. It also shows the data type of each column for the same reason.
Once you select your columns and your filters, click on result. (Oh, you will also need to decide what kind of combination you want -- click on the dropdown.) The result will be a new Request that has data from both SAs in the query and combined in the manner you select (union, intersect, etc.)
That should give you a start.
http://obiee101.blogspot.in/2010/08/obiee-combine-with-similar-request.html -- Read this link this is good one to understand with screen shots. -- OBIEE 10g
http://oraclebiee11g.blogspot.in/2011/01/querying-across-multiple-subject-areas.html -- OBIEE 11g
Award Points it is useful.
Thanks
satya

How can I transfer songs from two different itunes?

I want to transfer songs from my brother's itunes library to my shuffle, but when I plug it in his computer, a message saying that his library is not linked to my library (or something to that extent) and whether I would like to replace the songs. If I click yes, all my existing songs are replaced with HIS songs. If I click on NO, the Shuffle icon does not appear at all and I cannot transfer any of his songs to my shuffle. How can I transfer songs from two different computers into my shuffle without replacing any of my existing music?
Shuffle Windows XP
Windows XP

You'll have to setup your iPod to manual instead of automatic update (I'm not sure, though, if it works with the Shuffle as well).
Alexander.

Can I sync the songs from two different Apple IDs (HK and JP) into one iPhone?

I want to buy some songs from a HK Apple ID and a JP Apple ID.
I just hope the songs of two Apple ID can appear in one iPhone.
But I don't want can I sync the songs from two different Apple IDs (HK and JP) into one iPhone.

Are you currently in Japan or Hong Kong ? You have to be in a country (and have a billing address in that country on your account) to buy or download from its store, that is included in the store's terms.
You can sync content from different accounts from your computer's iTunes library.

Table transformation from two different database

Hi all,
I am trying to load table from one database table to another database table in ODI 10g.I have created two physical and logical topology.
But when in interface design i have drag the source and target tables in the diagram window, but here it doesnot shows the auto mapping options, when i try it manually by dragging a field, i have failed. when i execute the operation the following error occured:
create or replace view db1."C$_0 W_INT_ORG_D"
as select
from     db1.W_INT_ORG_DS W_INT_ORG_DS
where     (1=1)
here both the source and target db are same..
How can i resolve it

Hi,
Thanks it worked.
I am getting another error on Insert flow into I$ table step.
I am connecting two database from two different hosts, both are in oracle.
I have two logical schema prepared for both database.
should i have to mentioned these schema in one physical topology? what should be placed in schema and work schema option.
I have used LKM Oracle to Oracle(DBLINK) as KM.
Please help
Best regards,
manish

Setting Up a New Mac From Two Different Time Machine Back-ups?

Greetings Apple People,
I am planning on getting a new iMac. Right now my wife I are still using our separate MacBooks from college. Both of them have Time Machine back-ups. We would like to setup our new iMac to have two different users. Is it possible to setup each of the users on the new iMac from our respective Time Machine back-ups?
I know you can do this seamlessly with one Time Machine back-up, but can you do it from two different back-ups, essentially merging the two, while keeping the separate user profiles?
Thanks!

Follow the steps in Pondini's Setup New Mac guide using one computer as the source on first boot. Then, hook up the second computer and use the Migration Assistant to transfer the second user account and nothing else. Don't use the TM backup because it's much slower doing it that way than directly from each machine.
27" i7 iMac (Mid 2011) refurb, OS X Yo (10.10), Mavs, ML & SL, G4 450 MP w/10.5 & 9.2.2

Concatenate columns from two different reports

In OBIEE 11g report, I am looking for a method to concatenate columns from two different reports.
My requirement is, if I show 'Units Produced' for customer A, I need to show another column 'Units Produced' for a related customer B.
Every customer has one related customer.
So my report shows all the data for customer A, but I need to add one column which is for custome B , so I am looking a way to concatenate columns or if some other way this can be done

Customer A is dimension table. You mapped to fact to get Customer A details.
Now you want for Customer B. Now create one more alias table for Customer and name it as customer B and join with Fact on Customer B keys and use it.
Each customer has related customer.
2 dimension tables one for customer and other for related customer.

How to calculate AGE from two different date fields

hi
I need to calculate AGE from two different date fields.
Can some help me how to do, when i try to do substraction formula it is showing error.
Thank You
Manu

Manu wrote:
Hi
Both fields are in date format only, i need to calculate no . of days between two different dates
Thanks
ManuThe reason for the question about the format of the column is because the simplest solution only works on DATE columns. Others have mentioned this here, but if you want the difference between two date fields, you can use this formula:
TIMESTAMPDIFF(SQL_TSI_DAY, date_column1, date_column2)
The above being said, you still didn't tell me what you did, or what error message you received. So again, if the above formula didn't work, what did you do? Where did you put the formula? What was the exact syntax you used? What was the error message you got?
Please don't make us work more than we need to. Answer all the questions in your next post. Thanks.

Selecting data from two different tables.

Do we need to use join two tables with primary/foreign key while trying to use select statement for getting data from those to table.? If no who can i go about do it.

872959 wrote:
If i am using From clause to get data from two different tables, is it necessary that both tables have column of identical data in them.In general, they ought to (or you need to join in a third table that tells you how to map rows from one table to rows of the other table).
It is not strictly necessary that there be any join condition between tables. If you don't provide a join condition, Oracle has to do a Cartesian product. That means that if there are n rows in one table and m rows in the other, the result set will have n * m rows. It is very rarely a good idea to write queries that do Cartesian products but it does occasionally happen.
Justin

Install RAM in pairs but from two different manufactures?

Similar Messages

Maybe you are looking for