Install Reader 11.0.9 using SCUP

Hi
We use SCCM 2012 and have just started to use SCUP recently, we have used it update Flash player without problems, so we know the setup is working.
We have Reader 11.0.8 on all our workstations (installed via application package in SCCM 2012). But now we want to upgrade to v. 11.0.9 using SCUP, however we have a problem...
We also use Office 2010 and Outlook and we use the PDF preview handler, this is working fine in v. 11.0.8, but since upgrading to v. 11.0.9 this feature is no longer active.
How can we make it work with v. 11.0.9 using SCUP as install source?
Sorry the text in screenshot is in Danish and German. But it says "PDF Preview Handler is deactivate"

Hi Scott,
Try disabling the 'Protected Mode' in Reader and check the performance.
What happens if you install Reader on a test machine without GPO but directly from Adobe.com?
Regards,
Rave

Similar Messages

I'm on Vacation with no access to my Mac. But had tried Sync. My software update is iOS 6.0.1. I've tried another WiFi network. I read your comment of deleting Apps for stuck update. So removed all Apps! Can't even install Free Apps. Now using my Kindle

I'm on Vacation with no access to my Mac. But had tried Sync. My software update is iOS 6.0.1. I've tried another WiFi network. I read your comment of deleting Apps for stuck update. So removed all Apps! Can't even install Free Apps. Now using my Kindle

Purplehiddledog wrote:
I do backup with iCloud. I can't wait until the new iMac is available so that I can once again have my files in more than 1 location without needing to rely solely on the cloud.
I also rely on iTunes and my MacBook and Time Machine as well as backing up to iCloud. I know many users know have gone totally PC free, but I chose to use iCloud merely as my third backup.
I assume that the restore would result in my ability to open Pages and Numbers and fix the problem with deleting apps, but this would also mean that if my Numbers documents still exist solely within the app and are just not on iCloud for some reason that they would be gone forever. Is that right?
In a word, yes. In a little more detail.... When you restore from an iCloud backup, you must erase the device and start all over again. There is no other way to access the backup in iCloud without erasing the device. Consequently, you are starting all over again. Therefore, it would also be my assumption that Pages and Numbers will work again and that the deleting apps issues would be fixed as well.
If the documents are not in the backup, and you do not have a backup elsewhere, the documents could be gone forever.

I am using OS X and am trying to set up a HP ENVY 5660 e printer and the drivers are not listed. I read somewhere not to use the install disk. What do I do?

I am using OS X and am trying to set up a HP ENVY 5660 e printer and the drivers are not listed. I read somewhere not to use the install disk. What do I do?

Your suggestion was a good one and what I found was that to use this and any other printer I looked at is that I need to update the operating system to a later version. I have been reluctant in the past to do this after reading update horror stories and since this computer does what I need and very well. Was glad I moved over from windows and this is the first problem I have had. Thanks for your help and any other suggestions you may have.

When trying to install Reader 9.2 updates it wants me to close applications that are using reader. There is nothing listed and no applications are running. Any ideas?

When trying to install Reader 9.2 updates it wants me to close applications that are using reader. There is nothing listed and no applications are running. Any ideas?

Make sure your browser is closed and check to see if there are any processes related to Acrobat still running. If you are using Windows, Control-Alt-Delete > Processes tab. Look for AcroRd32.exe or Acrobat.exe or Acrotray.exe and stop these processes from running before you try your update again. A good ol' computer reboot might do the trick for you too.

Search or Report on the CVE ID using SCUP 2011 and SCCM 2012.

I am in the process of deploying SCCM 2012 on a single server since we have a small environment, as a Primary Site Server. The SQL databases are located on a separate SQL 2008 cluster. I also have SCUP 2011 installed on the SCCM 2012 server.
I am starting to use SCUP as the facilitator to publish 3rd party patches into SCCM and I would like to be able to report on the CVE number that an update has. I know that not all updates have a CVE and that microsoft updates usually publish this in
the MSID article.
My question is if there is anyway to report on this CVE code from within System Center Configuration Manager? If the data is in the xml file in SCUP and I can read it there, does that information get discarded when published to SCCM or does it remain
with the update but hidden in the SQL DB? If it is hidden, I'm sure we can report on it but I would like to know if anyone else is pursuing this or had any other ideas for reporting on the CVE or searching for the CVE in SCCM 2012?
Thanks in advance.
Jason Apt, Microsoft Certified Master | Exchange 2010
My Blog

Yes, I know this is an old post, but I’m trying to clean them up. Did you solve this problem, if so what was the solution?
To my knowledge nothing was added to R2 that would give you the CVE. I think this can be done as a custom solution but it would take a while to do the R&D and write the solution.
Garth Jones | My blogs: Enhansoft and
Old Blog site | Twitter:
@GarthMJ

Hi using SCup 2011

hi all
iam using scup (system center update publisher) to update mozila to 34.0.5 can any tell me what is installable and installed rules
for scup 2011

Check with '''scup''' for that information. No one here is familiar with that application.

Can I instal Reader to a drive other than C:?

Is someone able to tell me how to instal Reader to a drive other than C:?
I am trying to free up space on C: and prefer to load the Reader files into another drive, but I did not see an option to do that when downloading, and the installer just starts automatically without prompting for a target folder.

Use the offline installer from http://get.adobe.com/reader/enterprise/ and click on Change Destination Folder

Cannot install Windows 7 32-bit using Boot Camp

I have one of the new iMacs (late 2012) and I can't install Windows 7 32-bit using Boot Camp. Whenever I try to being the installation using the Boot Camp Assistant, I always get the following message: "Need 64-bit Windows installation USB drive or DVD. Boot Camp only supports 64-bit Windows installation on this platform. Please use an USB drive or DVD which contains 64-bit Windows". I have successfully installed 32-bit Windows on my Macbook Pro that is running the same version of Mac OS X and Boot Camp, but I don't know why on this new iMac it doesn't allow me to. Apple's documentation states that I should be able to install either 32-bit and 64-bit without any problem, but this is not the case here. I can't find anything about this problem/error on the Internet either. HELP!!!

AidenT wrote:
Yes, circumstances do change but if Apple is, as they claim to be, serious about seamlessly migrating what is still a large and dominant market share of users from Windows, supporting 32 bit versions is not a nice to have, but a must have.
I don't see why users have to make excuses when there is a clear shortfall of what is promised.
In other discussions, there is talk of an opportunity for Apple to make a significant impact, as Windows 8 has deviated so much from the comfort zone of traditional Windows users. But to make that change, Macs have to support what is still a primarily 32 bit environment in the installed base.
As for the use of VMs, I had a tough time migrating out of Parallels 6 after an upgrade to Mountain Lion broke compatibility so IMHO it is not a long term solution unless you are happy to hand out $50 every 2-3 years just to support the same functionality.
Use Virtual Box, it's free.
32 bit may have a reasonable user base but it's going away fast, if you must use 32 bit Windows and won't use a VM your choice is limited.
Buy a PC, or buy an older Mac.
The rest of your post is speculative and I won't go there.

Installing Adobe Photoshop 10. Using Windows 7 and IIE. Get message "error:1"

Installing Adobe Photoshop 10. Using Windows 7 and IE. Gt message "error:1"

Not sure what CS3 is. Attached is a screen shot of the error message I get when trying to use Photoshot Elements 10.
Looks like I can't attach a Word or PDF document or paste an immage.
This forum may not be very user friendly.
Let mehttp:// know if there is another way to communicate.
Thanks,
Phil
<Removed by Moderator>

Can I buy final pro using a Mac in one State and then install it in other State using another Mac?

Can I buy final cut pro x , using my mac and then install it in other State using another Mac?

Yes, as long as both Macs meet the system requirements for it.
(112783)

How can I create a new partition to install Windows 7 by not using Bootcamp

How can I create a new partition to install Windows 7 by not using Bootcamp?

If you want to dualboot you have to use boot camp i think. I think you have already a full disc and cannot make another partition I'm I right?
Your question seems a bit blurry so I'm giving you a general tip here.
If you want to just try the beta you can always use Sun's "Virtualbox".

Error occurred in deployment step 'Add Solution': A feature with ID '' has already been installed in this farm. Use the force attribute to explicitly re-install the feature.

Hi I am getting the error
Error occurred in deployment step 'Add Solution': A feature with ID 10495515-2482-41fd-98eb-3c87f739f54b has already been installed in this farm. Use the force attribute to explicitly re-install the feature.
when trying to deploy web parts
question 1 - how do i use the force attribute when deploying from visual studio
question 2 - am i deplying it to the right place, if i deply it to the
url:port that points to my central admin tool it deploys but i cant seem to see it in any of my webs in my site collection, if i deploy it to the
url:port that points to my site collection I get this error.
im new to all this by the way :)
thanks in advance

If you are deploying from Visual Studio then please follow this post:
http://sharepointfordeveloper.blogspot.com/2014/03/solved-visual-studio-issue-error.html
Open the visual Studio and navigate to the feature XML file and add the bellow attribute.
AlwaysForceInstall="TRUE"
The <FeatureName>.Template.Xml output would be some think link this.
<?xml
version="1.0"
encoding="utf-8"
?><Feature
xmlns="http://schemas.microsoft.com/sharepoint/"
AlwaysForceInstall="TRUE"></Feature>

How can I do a clean install after doing an update using a volume purchase license?

My question is this: We purchased 20 licenses of Lion through the Volume Purchase program. 2 of the users installed it first doing an upgrade - now they have decided they want to do a clean install. How can they do a clean install - I can't give them the installer cd we created because I have been informed by Apple Sales that it will use another license from our quantity of 20 - but they offered no other solution.
We would rather not waste another license just to do a clean install.
Thanks!

Install or Reinstall Lion from Scratch
If possible backup your files to an external drive or second internal drive.
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Erase the hard drive:
Select Disk Utility from the main menu and click on the Continue button.
After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Erase tab in the DU main window.
Set the format type to Mac OS Extended (Journaled.) Click on the Erase button and wait until the process has completed.
Quit DU and return to the main menu.
Reinstall Lion: Select Reinstall Lion and click on the Install button.
Note: You can also re-download the Lion installer by opening the App Store application. Hold down the OPTION key and click on the Purchases icon in the toolbar. You should now see an active Install button to the right of your Lion purchase entry. There are situations in which this will not work. For example, if you are already booted into the Lion you originally purchased with your Apple ID or if an instance of the Lion installer is located anywhere on your computer.
This method relies on the Internet Recovery system. This is the standard procedure when you don't have an installer or Lion came pre-installed.

I can not use the Acrobat DC Cloud. How do I get an Acrobat PDF Reader that does not use the Cloud?

The subject pretty much says it all.
I can not save sensitive corporate files on your Cloud.
Even for non-sensitive PDFs, I do not always have access to the cloud when I need to view or work with a PDF.
I need a non-cloud version of Acrobat Reader.
When Reader DC installed onto my system it must have blown away Reader XI.
After I uninstalled Reader DC, now I can't open/read PDFs anymore.
Also, I can't find a copy of Adobe Acrobat to install that isn't cloud dependent.
This is a problem for me.
Besides all that, NOW I get error messages every time I try to re-install Reader DC.
See below.
So, today at work, I can no longer open PDFs.
Thanks? NOT!
HELP!
Gene

Here, I finally have a solution.
Gotta love Google.
More helpful than Adobe so far.
Note: Clicking on the link below will immediately open the download dialogue box.
ftp://ftp.adobe.com/pub/adobe/reader/win/10.x/10.1.1/en_US/AdbeRdr1011_en_US.exe
I used this download to install, and the Installer was flawless.
Thanks everyone who contributed ideas and potential solutions.

HT201250 I had to replace the hard drive in my old MacBook. I replaced it. Installed OSX10.6. Then using the system software I reinstalled data from my Time Machine backup. On completion it asked for my password. It is not accepted. I am locked out how I

I had to replace the hard drive in my old MacBook. I replaced it. Installed OSX10.6. Then using the system software I reinstalled data from my Time Machine backup. On completion it asked for my password. It is not accepted. I am locked out how I overcome this?
I was already using 10.7. But only had the disc for 10.6.

Sorry I am new to this. Am I in the right area? I am using my iPhone to make contact. I am worried.

Install Reader 11.0.9 using SCUP

Similar Messages

Maybe you are looking for