Install rear view camera & parking sensors to 2013 BMW 320i

Is it possible to install after market backup camera and parking sensors with new BMW 320i?
Can the camera be integrated with buildin screen on the car?
What are the available products?
Thanks! 

xtwollc wrote:
Is it possible to install after market backup camera and parking sensors with new BMW 320i?
Can the camera be integrated with buildin screen on the car?
What are the available products?
Thanks! 
If its a brand new one, I would go talk with a BMW dealer for the backup sensors. They would also be able to tell you if your radio/info centre has rear view capabilites. 
King of the World...

Similar Messages

  • Rear view camera XAV-601BT

    I have just got a new car and it has the Sony XAV-601BT ******ed,  I have installed a rear view camera, the problem I am having is that the camera does not activate when I go into reverse, the camera works when I go into the menu and tap the camera icon. I have downloaded your installation guide and looked on the wiring diagram and there is a wire that is labelled reverse in, should this wire be connected to the reversing live or the video feed line? if it does I have another problem the plug with the relevant wire is not with the unit, is it possible to buy a replacement?
    Any advise gratefully received
    Thanks

    Greetings and thank you for your message les1951. Unfortunately, we are unable to assist customers outside of the US. We kindly recommend visiting our Sony Global Web site for information on contacting the Sony Support Center in your region at http://www.sony.net/SonyInfo/Support/.
    >Joffrey

  • Would a rear view camera work with a garmin nuvi GPS

    If I buy a garmin nuvi with Bluetooth would a Bluetooth rear view car camera work with it.

    Only a few garmin models allow a back up camera to be connected. Check the link below for what garmins have this option.
    https://support.garmin.com/support/searchSupport/c​ase.faces?caseId=%7B22ca4500-2009-11df-d1b4-000000​...
    The Garmin 760LMT is the only one I could find on BestBuy.com that has this options.
    http://www.bestbuy.com/site/Garmin+-+dezl+760LMT+7​%26%2334%3B+GPS+with+Built-In+Bluetooth/7352055.p?​...
    You will also need a cable and a back up camera for it to work.
    https://buy.garmin.com/shop/shop.do?pID=70938

  • IPhone5 rear-facing camera and flashlight not working after iOs 7.0.3 update

    This is my first time posting here so do forgive me if I leave anything out.
    Problem 1
    I updated my iPhone 5 to iOs 7.0.3 (on 10/22 when it released). Since then, my rear-facing camera has stopped working. When I open up the camera, it's just a black screen and I cannot take a picture or video, but the other elements on the screen are still functional: changing flash from auto/on/off, turning HDR on/off, switching from video/photo/square/pano, but still the screen remains black. When I switch to the front-facing camera though, it works fine. I can take pictures and video through that view.
    Problem 2
    The second problem that's happened as well is the flashlight in the control center is greyed out, can't click it at all.
    Attempt to Fix
    I brought my iPhone 5 to a Genius Bar. Guy took it to the back to open it up and check if there were any physical problems with the phone and camera. He came back, found nothing. Unfortunately my phone was no longer under the one-year warranty, so in order to fully replace the phone with a new or refurbished one, I would've had to dish out $200 something and I wasn't trying to do that just yet. So we decided to just wipe it clean and restore. After we did that, everything was working, the rear-facing camera, the flashlight, things were perfect. I left the Apple store, got on the train to head home. I opened up the camera to take a picture and long behold, it stopped working again. I got home and did the exact same thing the guy did, wiped my phone and restored. Everything was working again. I held my breath though... 1/2 hour later, same problems with the rear-facing camera and flashlight came back.
    Just as a note, not sure if it helps, when I use third-party camera apps/photo editors, when I try to use the camera within those apps, it freezes and closes.
    I don't know what else to do. It seems the only fix is restoring my phone and having the camera and flashlight work for a few minutes only to go back to the same problems. The Genius Bar didn't help. I'm not trying to give up $200 something when this is something that happened clearly because of the iOs 7.0.3 update. It was working perfectly fine before that.
    Any help is appreciated! Thanks!

    WORKAROUND FOUND ! Download and install "Awesome Camera" app and take a picture with that app. After 1-2 seconds of standby, it will work. Then you can go back to default Camera app which would work again.Please let me know

  • I have Windows 8.1 installed on my Macbook Pro Retina (Late 2013) and it keeps on crashing with a WHEA_UNCORRECTABLE_ERROR BSOD error

    I have Windows 8.1 installed on my Macbook Pro Retina (Late 2013) and it keeps on crashing with a WHEA_UNCORRECTABLE_ERROR BSOD error. Is this an issue with the bootcamp driver not compatible with Windows 8.1? or is there something I can do to fix this.
    I also keep getting WHEA-Logger Event-ID 19 warning events in the Windows Event Logs with the following details.
    A corrected hardware error has occurred.
    Reported by component: Processor Core
    Error Source: Corrected Machine Check
    Error Type: Cache Hierarchy Error
    Processor APIC ID: 3
    The details view of this entry contains further information.

    likely win8.1 dont have official bootcamp support yet
    1/3 of my logins into win8.1 result in a fatal bluescreen
    was the same deal when I installed win8 before official support
    and when the drivers with official support was released the issue went away

  • Can't view Camera RAW files in Bridge or Photoshop CS4 after upgrading to Mac Mavericks X OS.

    After upgrading my Mac operating system to Mavericks X I can no longer view Camera RAW images on either Bridge or Photoshop CS4!
    I'd already fixed the issue of not even being able to launch Photoshop by installing Apple's Java applet, but this doesn't seem to have helped with the Camera RAW situation.
    I've tried invoking "Update" in both Bridge and Photoshop, and both indicate there are no updates.
    I even went to Adobe's Camera RAW area, and downloaded and installed the Camera RAW plugin specifically for my cameras (Canon 5D Mk ii) and Photoshop CS4, and that hasn't helped at all!
    I feel that it's just another silly Java applet, but I haven't any idea how to proceed from here!
    HELP!
    Thank you,
    Bob

    Did you download and install the camera raw 5.7 update?
    Adobe - Photoshop : For Macintosh : Camera Raw 5.7 update
    There are also other updates you should install, such as 11.0.2 for photoshop and the bridge output module update, if you need them.
    Product updates
    Adobe - Bridge : For Macintosh
    Adobe - Creative Suite : For Macintosh
    Adobe - Photoshop : For Macintosh

  • Displaying rear view when navigating

    Could anyone give me any suggestions as to how I could display the rear view (instead of the normal front view) while navigating?
    That is, instead of seeing what's in front of me while moving through the scene, I only want to see what's behind me.

    Normally a camera in 3D graphics looks down the negative z-axis, set the camera to look down the positive z-axis and you are looking behind you.
    Hope this helps,
    Norris

  • App to use iSight as a rear view mirror?

    This may be entirely random - but has anyone heard of a download or application or other way in which to use the built in iSight as a "rear view mirror" of sorts? Preferably without having the whole photo booth open? I couldn't find anything in the downloads section but can't believe no one else wouldn't have thought of this.
    I am a writer and get easily distracted, so like to have ear phones in with music. Problem is, my back faces the door to my office and so if people come in or to the door I have no idea - and really don't want to be startled! If I had a "mirror" I could put at the top corner of my screen I think it would help...

    Or did you mean more like this item http://www.ecamm.com/mac/huckleberry/ ?
    This fits on the top of a laptop screen and make the camera show what is the other side.
    Opps re-read the last paragraph
    9:42 PM Tuesday; October 27, 2009
    Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
    Message was edited by: Ralph Johns (UK)

  • Why does the iPod Touch 5th gen 16 GB, not have a rear-facing camera?

    I am looking to replace my daughter's iPod Touch 4th Gen 16GB, but I can not find a model like hers that has a rear-facing camera. The new 5th gen 16GB, only has a front-facing camera, where the 32GB and the 64GB have front-facing and rear-facing cameras.
    My question is, why is that?

    lllaass said it, because thats the budget version, its much cheaper. The 16GB costs 229$ and the other ones with the back facing camera 319$ or 419$.
    Apple always sold a budget version of the iTouch.
    With the 2G in 2008, the 8GB was much cheaper than the 16 or 32 GB.
    With the 3G in 2009, the parallel kept the 8GB 2G for a reduced price.
    The 8GB 4G in 2010 was also cheaper than the 32 or 64GB one.
    In 2012 - June 2013 they kept the 4G iPod next to the 5G.
    And now the only sell one model - which is the 5G due to the fact that only this model can run iOS 7, and they needed to remove a feature in order to reduce the price.

  • My rear facing camera has started taking blurry photos, it cant seem to focus. Any ideas?

    My rear facing camera has started taking blurry photos, it cant focus on anything and just blurs. I have tried turning it off and back on, ive also done a restore and still doesnt work. If your really close to something it will be ok but anything other than right in front of the camera and it just blurs. Any ideas?

    i have iphone4 32gb.
    my auto focus also not working.i was tried everthing but not work.
    -restore firmware/ios = not working
    -install super camera = not working
    and lastly i've got the problem solved!
    step 1:
    open your default camera application and dont close it.
    step 2:
    flick the rear camera using your finger at the top side and the back side of the camera lens,
    and that same time too try to tap your screen to help your camera to force/help/make auto focus function to work.
    and now your camera + auto focus is working!!

  • Excel Taking time to open after installing Smart View

    Hi,
    After installing Smart View excel is taking around 2 minutes to open.
    We just launch Excel and it takes two minutes to open. We don't connect to the planning server. Then when Excel responds, the smart view plugin works fine, we can connect to the Planning server and work normally.
    Here's the installation detail:
    We have install Smart View 11.1.2.2.310 on Windows 7 - 64Bits SP1. Each client use Office Standard 2010.
    RAM: 4GB
    Procesor: Pentium dual core T4200 2Ghz
    We have try to install Smart View 11.1.2.3.000 and we have the same issue.
    The machine ressource don't bog down. The procesor and ram use are normal.
    The problem is that when the end user open an office document with the plugin smart view activate it takes 2 minute to open. There is no error. When Excel respond, the smart view works fine.
    Thanks in advance for your help.
    Regards,
    David.
    Edited by: David Mendele on Jun 6, 2013 1:27 PM

    There was a bug in 11.1.2.1 and MS 2010 where the refresh is slower. I've seen the same on my machine with same configuration.
    You can log an SR and see whether it is also a bug.
    Regards
    Celvin
    http://www.orahyplabs.com

  • I want to edit my raw images on cs5 photoshop.  But when I go to open the .CR2 file it says  '' Could not complete your request because the file appears to be from a camera model which is not supported by the installed version of Camera Raw. Please visit

    I want to edit my raw images on cs5 photoshop.  But when I go to open the .CR2 file it says 
    '' Could not complete your request because the file appears to be from a camera model which is not supported by the installed version of Camera Raw. Please visit the Camera Raw help documentation for additional information.  '' 
    When I go to updates in photoshop help i try to update photoshop and photoshop camera raw but it then says 
    '' Updates could not be applied the error log file may help you in identifying the problem. Then, try updating again. If the problems persist, contact customer support for further assistance. 
    Photoshop Camera Raw 8.7.1(CS6) There was an error installing this update. Please quit and try again later. Error Code: U44M1I216 ''  
    I dont know how to get around this please help

    CR2 files from which Canon camera?
    Supported cameras are listed here
    Camera Raw plug-in | Supported cameras

  • Unable to install Report Viewer 2012

    As part of the SCOM console install I need to install Report Viewer 2012. To install Report Viewer 2012 I need to have Microsoft System CLR Types for SQL Server 2012.
    I have installed all versions of CLR Types for SQL Server 2012 that I can find. But I still am not able to install Report Viewer 2012. It errors out when checking for CLR Types for SQL Server 2012.
    I have tried every variation of report viewer (2008,2010,20120) and CLR Types for SQL Server (32bit/64bit). I am just not able to install report viewer so I can install the SCOM console.

    Go to the link below 
    http://www.microsoft.com/en-us/download/details.aspx?id=35580 
    and then select SQLSysClrTypes. You don't need all the files.
    Did this multiple times with the same result. After installing the ClrTypes the Report Viewer still indicates that it is failing that requirement. 

  • How do I re-install software that came pre-installed on my mac?

    How do I re-install software that came pre-installed on my mac?
    I bought my first mac in 2003, in 2004 I bought MS Office: Mac. In 2006 I got another mac, this one (I'm pretty sure but not 100% certain) came with MS Office pre-installed. I'm still using that computer I got in 2006 (writing this message on it right now) and have been having problems with Word and have had no luck with trying to fix it. I recently came across my original installation disk for the version of MS Office I got in 2004. So, when I became frustrated trying to fix Word I just grabbed this old installer and reinstalled office, assuming in that moment that it was the same version I had been using. I got it all installed and working and went to load up my most recent document that I've ben working on and it won't load because it's a docx file. I don't know where else I would have gotten a new version of word, I'm not one for unnecessary updates and updating a word processor is about as unnecessary as it gets. I MUST have had a newer version of word pre-installed on my computer, because any time I've ever tried to open word files from this computer on my older mac the files wouldn't work, so any time I need to do that I either make a PDF or email myself the text.
    Anyway, I'm assuming that apple has all my registration info on file and can confirm that I bought the software, can they provide my an installer? My other concern is that this computer was a christmas gift and was purchased by my dad, though I don't know whose name is on any kind of registration that may exist. The problem here is that he died, so I'm concerned that apple won't support my product because the original "owner" is deceased, even though I don't think he ever so much as laid a finger on this computer or even looked at it more than twice after he gave it to me.
    What is my best course of action here?

    I would have to presume the 2006 Mac was used, and came with Office 2008 on it from the seller. Apple has never offered Office as a bundled purchase, and it is not pre-installed with any Mac.
    Since you have the disk for Office 2004, the activation key should be on a sticker on the CD/DVD sleeve. As I recall, anyway. I no longer have my 2004 copy to check. If you have the key, it doesn't matter who it originally belonged to. You can still enter it and activate the software.
    Once you have that installed, you can install the XML converter for Office 2004. That will allow you to open from all newer Windows and Mac versions of Office. The only things that won't necessarily convert are features that don't exist in Office 2004, and so can't be translated correctly, or at all.
    Microsoft is saying Office 2016 for Mac and Windows should be available for the official release sometime either late summer, or early fall. So hold off purchasing a new version if you can. MS offers to reduced upgrade price for Office. You'd pay full price for Office 2011, and then again for Office 2016.
    And just to note. Office 2008 and Office 2011 work fine in Snow Leopard.

  • I have a mac pro 2007 model. It appears I have a corrupted sector on my the hadrive tha has my operating system. If I use the install disk that came with is (Tiger) can I still get my lion back.

    I have mac pro 2007 model given to me, I updated it to lion about six months ago, and I do not have a time machine.
    Lion stopped loading before I get to the login screen,
    I tried all the tips, doing a option/shift/v. I noticed several fsk_dsk errors that it could not fix on my boot drive.
    Restore would not work either. The only physical copy I have is the install disk that came with the mac. I think it is Tiger.
    If I put this operating system on will I be abel to upgrade it to lion, and if so will I have to pay again?

    The Lion Recovery Partition has its own index. Your Macintosh HD partition is the one with the troubles.
    If Disk Utility cannot fix it, you may need to apply different Utilities, such as Disk Warrior.
    Some readers suggest that the best disk repair is to erase the drive and restore it from your Backups.
    This might be a good time to consider getting a new drive to have on hand. This would allow you flexibility in copying, fixing, and (if needed) replacing the drive with the problems.

Maybe you are looking for