Install SAP Baseline Colombia v 1.603 over SAP ECC 6.00 EHP4 Ready SR1

Hi everyone,
I had already installed SAP Development Sysem with the media "SAP ERP 6.00 EHP4 Ready SR1" (SAP Note 774615 - Support Package levels of ERP/ECC installations/upgrades).
Currently we are analyzing with funcitional consultants to install SAP Baseline Colombia v 1.603 over "SAP ERP 6.00 EHP4 Ready SR1" installation, is this scenario correct? Or which installation media should I use?
In SAP Note 1083533 - Installation of Enhancement Package 3 on SAP ERP 6.0, it states that "For Enhancement Package 3, you require the Support Packages of ERP 6.0 Stack 08" so the installation media that is more close to stack08 is "SAP ECC 600 Support Release 2", please confirme me if is this correct?
Best Regards,
Franklin Cedillo
Basis Consultant

> I had already installed SAP Development Sysem with the media "SAP ERP 6.00 EHP4 Ready SR1" (SAP Note 774615 - Support Package levels of ERP/ECC installations/upgrades).
> Currently we are analyzing with funcitional consultants to install SAP Baseline Colombia v 1.603 over "SAP ERP 6.00 EHP4 Ready SR1" installation, is this scenario correct? Or which installation media should I use?
You need to use Solution Manager, create a task in the maintenance optimizer and get the correct packages.
Since your system is already on EHP4 (or EHP4-ready) you can forget about the notes of EHP3 and EHP2.
Markus

Similar Messages

SAP ECC 6.0 EHP4 installation with ABAP+JAVA stack

Hi,
I need to install SAP ECC6.0 EHP4 with ABAP+JAVA stack on windiws server 2008 with oracle.
I have read that for this, we need to install ECC 6.0 EHP4 ready and then upgrade to EHP4 using ehpi installer.
I have found the documents seperately for ABAP and JAVA stack and not for ABAP+JAVA.
I need clarifications on these.
1.Do we need to install ABAP and JAVA instances seperately with EHP4 and then upgrade(In that case I have to install both instances on single host)?
2.Should we give seperate <SID> for both instances and create seperate databases?
3.Hard disk requirement for this set up.(We have 150 GB including C drive)
4.Steps to perform after installing ECC6.0 EHP4 ready
5.Please send me the doc. if anyone has
Anyhelp would be highly appreciated.
Regards,
Surya

> 1.In the installation document for EHP4 ready for SAP ERP 6.0 ABAP.It is mentioned that this installation contains only basic EHP4 for ERP 6.0 and we need to install additional EHP4 functionality in the SAP ERP 6.0 -EHP4 ready system.
> It states that atleast Support pacakge stack (SPS) 1 of SHP4 needs to be installed.So If I install this stack using EHPi installer in the post installation activities my SAP ERP 6.0 EHP4 will be in place?Please confirm.
Yes..
>
> 2.Can I install SAP SR3 with dual stack and upgaradte it directly to EHP4 at a time?
Yes you can do it.....as SAP still supports dual stack ERP systems to EHP4
>
> Any solutions or suggestions from others also welcome.
Why do u want a dual stack ECC ystem?? any specific requirement???
Regards,
Nirmal.K
Edited by: nirmal konchada on Feb 2, 2011 12:16 PM

BASELINE PACKAGE - V1-V2.603 and Best Practices for Pharmaceuticals

Hi All,
         > Recently we have upgraded to EHP4 stack 4
         > I am trying to install BASELINE PACKAGE - V1-V2.603 I chose that because its localized for India.
         > When i am trying to install BP-ERP05 603V7 and BP-INSTASS 600V7 its asking for BBPCRM 600, BBPCRM
            700 and SAP_APPL 600, SAP_APPL 603.
         > Why does the installer ask for lower versions? ofcourse i have read that if the version is Higher than the one mentioned
            in the "Quick Guide to Installing the SAP Best Practices Baseline Package (IN)" will not work.
         > But do we have any BaseLine Packages Specific to EHP4?
         > If not, then could any one tell me where and how to download and install the BBPCRM as an add-on.
         > I only need that Software component because I strongly feel that all the interdependencies are linked with this one only.
Any help and suggestions are welcome.
Regards,
Antony Chaitanya.

Hi Sunny,
                Thanks very much for your response.
The major problem that i am having is I some how did not include the BBPCRM software component or the related software components for CRM at the time of upgrade is my best guess.
So, the latest add ons BP-CRM60 600V3 and BP-CRM70 700V1 or the add ons BP-ERP05 600VD/ 603V7 along with that BP-INSTASS 600V7 are not able to install because the prerequisite are not meeting. Only BP-INSTASS 600V1 got installed.
Can any one tell me how and what to do now.... plzzz???
Things like how to get the CRM related s/w components installed or if there is a work around to get the Baseline Packages (IN) activated with out the CRM.
Regards,
Antony Chaitanya.

Crystal reports over SAP r/3 tables

I am trying to write a Crystal report over SAP r/3 tables (BSIK and LFA1) with no success.
I have CRpts installed along with the "client side" SAP integration kit. When i try to create a new connection to my development ERP system i am asked to select an available system, but the dialogue box is empty. I can however connect to a SAP BW query successfully using the SAP toolbar that has been added when installing the integration kit.
Is there anywhere a set if instructions to successfully install and configure CRpts to report over SAP r/3 tables ?
Andrew Fox

Make sure to define an environment variable called SAPLOGON_INI_FILE in the system your CR designer is installed on. The variable should contain the path to your SAPlogon.ini file including the file name. eg if saplogon.ini is found under c:\Windows then the variable shoud be set to c:\Windows\saplogon.ini . Restart the CR designer and try again.
If the system list remains empty then locate to saplogon.ini file, open it using Notepad and choose the Save as option. All you have to do is to overwrite the existing file (ie. do not change the name) after changing the encoding to UTF-8 (drop-down list at the bottom of the Save as window)
Regards,
Stratos

Possibility of having NW Gateway over SAP CLM?

Dear Experts,
We have a Customer requirement of using NW Gateway over SAP CLM. Can this forum please confirm if this is feasible?
To be precise:
We need to use NW Gateway on SAP CLM to expose the CLM RFCs as oData services and consume them in SAPUI5. The second is quite possible, I understand. My doubt is whether we can install NW Gateway on SAP CLM system to achieve our goal.
Any pointer is much appreciated!
Cheers,
Mickey.

Hi again,
based on SAP Sourcing/SAP CLM integration with SAP SRM and SAP Sourcing - Wikipedia, the free encyclopedia , it is clear that CLM is part of SAP Sourcing which is part of business suite.
Again SAP Sourcing is part of SAP SRM which is of course part of business suite.
Regards,
Chandra

How to calculate days between 2 dates excluding public holidays over SAP ?

Hi
Have a universe over SAP data. Trying to calculate days between 2 dates. SAP holds Public Holiday data in various tables e.g Thol and data is updated via scal. Using my univeres as a source I want to run reports for different countries so need to have various bank holidays not just UK. In SAP function modules handle this. Has anyone designed a solution to cater for this situation in a universe ?
Thanks in advance
M

Hi,
I assume you mean SAP R/3 (ECC) when you write SAP and SAP BW.
Are you using BW? If so, I would load the data into SAP BW, create a query using customer exit variables and build your universe on top of that...
-J

Advantages of SSRS over SAP HANA

We are looking into options for developing reports.
The data sources are SAP HANA ad Oracle/SQL Server. The two reporting options we are looking at are SSRS and SAP HANA. I would like to know if SSRS is advantageous over SAP HANA. If yes, please specify the reasons.
Thanks in advance.

Hello,
SQL Server Reporting Services provides a full range of ready-to-use tools and services to help you create, deploy, and manage reports for your organization, as well as programming features that enable you to extend and customize your reporting functionality.
One of the principal advantages of using Reporting Services is the ability to manage reports and related items such as folders, data source connections, and resources, from a central location. We can define security, set properties, and schedule operations.
We can also create shared schedules and shared data sources and make them available for general use.
For more information about SQL Server Reporting Services, please refer to the articles below:
http://technet.microsoft.com/en-us/library/ms159106.aspx
http://www.venkateswarlu.co.in/MSBI/ssrs/advantages_of_ssrs.aspx
Hope this helps.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Advantages of EP over SAP BI Web Reporting

Dear Experts
Can you please share your inputs on Advantages of EP over SAP BI Web Reporting?
Appreciate if you could share any presentations or documents on this.
Thank you in advance.
Best Regards
PKC

Hi,
They are absolutely different environments. With EP, you can develop WebDynpro Applications, using ABAP or Java, integrate Internet Service, develop applications with Visual Composer, ... It's much more than a reporting environment. You can integrate BI reports on EP, using iviews portal components.
Look these threads:
http://help.sap.com/saphelp_nw04s/helpdata/en/43/6ee85d99506fcfe10000000a1553f6/frameset.htm
Hope this helps,
Ivá

NW IdM Install on MS 2003 server with an existing SAP instance

All:
   I have never worked with SQL server before and need help.
My Scenario:
   I have an EP installed with SQL 2005 on Windows 2003.
   I would like to install a NW IdM on the same server.
Coming from a unix/oracle environment, if I need two SAP systems on a single host, I would install two oracle instances and database and each SAP instance would point to its own home and database.
How does it work with SQL server. Will I have to install a new instance of the SQL server software and database and if so where would it be? Right now I see that the EP SAP instance, datafile, Tempdb and Logfile resides on the E:\ drive and I also see a C:\Program Files\Microsoft SQL Server. How does a "named instance" fit in my scenario?
Could someone help me understand?
Thanks
S.

Hi Markus
And thanks to your answer, it helped me to succeed in this first step but unfortunately 1 minute later during the install process I have a new error telling me :
MDB-05042 Error while executing script "CREATE DATABASE BW3 ON PRIMARY ( name = 'BW3DATA1' , filename = ' C:\BW3DATA1\BW3DATA1.mdf ', size = 11000 FILEGROWTH = 60 )....... idem for BWDATA2 ......... idem for BWDATA3   MODIFY FILE encountered operating system error 112 while attempting to expand the physical file. CREATE DATABASE failed. Some file names listed could not be create.
Could you help me to solve this error . Thank you in advance.

Installing Mac OS X 10.4.7 over 10.4.8

Hi, I've recently accidentally installed Mac OS X 10.4.8 over 10.4.7 when I didn't want to. Is there any way of undoing this?

Well I used my Dad's discs (which are legitimate) so I've got Tiger
now but it's Tiger Mac OS X 10.4.0 or 10.4 whatever it is (the original
one I think).
Unless your Dad purchased the Tiger retail Family Pack, installing Tiger on your Mac using your Dad's Tiger install package is not legitimate unless your Dad no longer has Tiger installed on his Mac.
These applications are not included with the Tiger retail install package.
IWEB
IPHOTO
PAGES
KEYNOTE
IMOVIE HD
IDVD
GARAGEBAND
Unless iLife and iWork versions (non-trial version of iWork) were included with your Mac purchase, you need purchased versions of iLife and iWork to install these applications on your Mac and if your Dad purchased iLife and iWork which are still installed and being used on your Dad's Mac, you can't use your Dad's iLife and iWork install packages to install the applications.

Oracle SCM & OPM Advantages Over SAP MM & SCM Suite.

Hi every one,
Are there any Features in Oracle EBS which would be concidered as advantage of Oracle SCM & OPM over SAP MM and SCM Suite. All you gurus out there please share your views and experience.
Waiting for a fruitful response.

Hi,
1. Cost Allocation to multiple FG in a single production batch cannot be handled in SAP. SAP expects a batch to have a single product.
2. SAP Material Ledger does not handle multiple levels of iteration (Reprocessing), which can be common in a process manufacturing industry.
Regards,
Malcolm

Installing Software Update has been running for over an hour now, anyone else having the same issue?

Installing Software Update has been running for over an hour, anyone else have the same issue?

Hopefully it's been resolved by now - I have no idea how large each one of those files are. The progress bar tells you; FWIW, I only download one at a time - makes it easier and faster and you can choose to do the next one when you have time.

Create SSO on SAP portal to ECC 6.0 EHP4 backend

Hello,
I want to create a SSO connection form my SAP Portal server to my ECC 6.0 EHP4 Backend system.
My JAVA Portal is installed on the same system as the ECC 6.0 backend system.
For the configuration I follow the steps as described in the document: http://www.sap-img.com/basis/configure-the-sso-single-sign-on-for-portal.htm.
At point 5.3 I have to set the Backend System as "ACL" in the Portal. So Iu2019m still in the Visual administrator from point 5.2 but now I go to the path Server --> Services --> Security Provider --> Ticket.
Here I choose the authentication tab and want to add the com.sap.security.core.server.jass.EvaluateTicketLoginModule. Buth when I press the Add button I get a list of available login members. In this list there is no com.sap.security.core.server.jass.EvaluateTicketLoginModule login module available. Does someone know what Iu2019m doing wrong or how I could add the correct login module?
I attach a screen shot from Visual administrator.
Kind regards,
Richard Meijn
Edited by: Richard Meijn on Aug 10, 2011 8:20 AM

Cahtal,
Thanks for you quick reaction but it's not all clear for me. So could you explain it a little bit more detailed fo me.
If I write something wrong please correct me. I understand the following
So If I am on the "Authentication" tab I press the Add new button
In the list which shows up I select the u201CEvaluateTicketLoginModuleu201D
Here I change the name and option value to trustedsys01=<PORTAL_SID>, <PORTAL_CLIENT>
Kind regards,
Richard Meijn

Data transfer b/w SAP to Java using IDOC and Interface SAP Jco

Dear Experts,
The challenging requirement we are having is, we need to create the interface for data transfer between SAP system and the Java system. The data will be transferred from SAP to java and similarly once some processing done in Java again the details needs to be transferred from Java to SAP.
For this data transferred we are planning to use IDOC process and for interface "SAP Java connector (Version 3.0.5)" we are planning to use. As per our understanding, from Java side one program needs to be written to connect with SAP as "Registered program". This registered program will appear in SAP GATEWAY automatically and using tRFC, TCP/IP connection both SAP and Java system will be connected.
In this case we are having some doubts.
1. The data from SAP is going to be transfered from one Custom transaction (Z tcode). Once "Outbound IDOC" will get triggered and will carry the details. Now the doubt is, whether the data / details will get transfered to JAVA system automatically or we need to perform any other steps from SAP ABAP coding...(like converting in to flat file, XML file and etc) ??
2. We are planning to install "SAP Jco" in Java server. Is this correct...??
3. Other than SAP Jco any other softwares needs to be installed or not..??
4. Since we are going to trigger the "outbound IDOC" from custom transaction, we are planning to develope one program in SE37. Other than this any other program we need to develop or not..??
5. Any sample Java program for the SAP Jco version 3.0.5 to create the "Registered program" with SAP..? (e.g. SAP Listener program).?
If anybody has detailed steps or explanation please share it with us.
Thanks in advance
Warm Regards,
VEL

Hi All,
For the above mentioned issue, we implemented JCo software in JAVA system and created the JAVA program including SAP logon credential details like Client, User name, password and Language details.
When this JAVA program was compiled successfully then, that non SAP system will appear in SAP gateway Tcode.
Once non SAP system started appearing in SAP gateway that means, both SAP & Non SAP are connected automatically.
Regards,
Velmurugan P

SAP Business one 8.8 Integration for SAP Netweaver

hi all,
Where to download SAP Business one 8.8 Integration for SAP Net weaver Components(Installation Packages for 32 bit). I installed one B1iSN but its only Integration for SAP Business One Not for SAP Business one 8.8 Integration for SAP Net weaver.
Please send me the link. Its urgent
Thanks & Regards
B.Lakshmi Narayanan

Hi
[https://websmp104.sap-ag.de/sbo-swcenter]
Software Distribution Center >SAP Business One Products > Updates
SAP Business One 8.8 >>> SAP B1 8.8 INTEGRATION FOR NW >>>Comprised Software Component Versions
B1 8.8 INTEGRATION CONTENT
B1 8.8 INTEGRATION SIM
B1 8.8 INTEGRATION TECHNOLOGY
Hope you find.
Thanks
Kevin

Install SAP Baseline Colombia v 1.603 over SAP ECC 6.00 EHP4 Ready SR1

Similar Messages

Maybe you are looking for