Install SAP GUI 7.20 on Windows terminal server

Hi,
I would like to install SAP GUI 7.20 on a Windows Terminal Server and configure it so that all users on the terminal server share a common configuration. As the installation is now all users have to define the systems in GUI the first time they start it, but I would like to do this globally. Is this possible?
Best regards,
Thor-Egil

> estimated 20 or more users who will be using the WTS to do their specific transaction. How much ram do we need to put in the WTS to handle 20 or more users?
This depends on what the users will do on that system. I suggest you contact the hardware vendor for a sizing of the machine.
> and follow up question, do you recommend using terminal servers?
It's an easy way to centralize the administration, you have got only one SAPGui installation.
Markus

Similar Messages

SAP GUI Memory issues on Windows Terminal Server 2003!!

Hi All
We are currently experiencing serious issues with our terminal servers and SAP GUI. It appears that SAP GUI is consuming a large amount of memory inorder to run, which in term is causing our terminal servers to page more.
I am not sure where to start with this issue so any help would be great!
Thanks
Phil
Loads of points if someone helps me solve this!!!

Citrix won´t help much, it´s "just" a different protocol between the client and the server, Citrix itself will use even more memory.
Why are you sure, that the reason for this is the SAPGUI and not any other Office program?
Let´s calculate:
I´m writing this message on a TS too. My Outlook (2003) consumes ~ 32 MB memory (incl. virtual), I have 4 SAPGUI windows open which consume 64 MB and some telnet sessions (no Word, Excel etc.)
Let say roughly 128 MB all in all.
If you have 2000 users with 20 servers, means, 100 users on one server, that would be 12,8 GB memory - not caclulated other services running on that box (printserver etc.) including the operating system itself.
If your users have Internet Explorer (or other browsers) open too, you will need to add that amount too. 128 MB per user is the minimum.
If users use BEx (or other .NET based BI developer tools), that amount will doubled (at least).
SAP recommends a PC with at least 256 MB memory to run a SAPGUI with acceptable performance, do you have that much per users? How big are your single servers?
Markus

I've installed SAP in my PC with windows 2000 server family....... .......

I've installed SAP in my PC with windows 2000 server family... I want to upgrade my OS to XP. Can it be possible without unmounting SAP??? Please help me.

Hi Pratap,
SAP doesn't work with XP, it works only server Operating System.
But u can instal XP in the system without currupting the SAP.
Make sure that your HDD having atleast 3 partitions.
The first two partintions (Ex.C:/& D:/) may have 2000 Server and SAP respectively.
In the 3rd Partition (Ex.E:/) u can instal XP. but better to not touch 1st two Partitions
To Instal XP follow these steps.
Insert XP OS CD
Restat the System
follow installation procedure according CD
Finally select E:/ to install XP.
Pls let me know your feedback
Regards
Raveendra

Installing SAP GUI on 64-bit Windows 7 with 32-bit Office

Until about 6 months ago, 64-bit systems in my environment had 64-bit Office 2010 installed. That caused some problems with other applications, so I made the decision that, going forward, ALL systems would have 32-bit Office 2010 installed.
Apparently, it's taken 6 months, but I finally have a need to Install SAP GUI 7.20 Patch 6 on a 64-bit Windows 7 system with 32-bit Office 2010. It turns out, that doesn't work.
I receive this:
Not all package prerequisits [sic] are fulfilled
Outlook Client extension for the synchronization of SAPoffice calendar with Outlook calendar... No compatible version of Microsoft Outlook found.
I am assuming that since this same installation works on my 32-bit systems, that it is upset about my architecturally-mismatched Office.
Am I correct about the source for this problem? If so, is there anything I can do to make the GUI work in this environment?

Hi John,
Actually, there is no mismatch in having 32-bit Office installed on 64-bit Windows. In fact, this is probably the preferred environment. SAPGUI in general is much happier with 32-bit Office, especially older patches (by the way, 7.20 is no longer in support -- you should upgrade to 7.30).
The errors you're receiving are most probably related to lingering 64-bit components of Office on your workstation. We had the same situation in my office a while back, when we first started rolling out 64-bit Windows to a few users, and the PC techs mistakenly thought that meant they had to install 64-bit Office. That caused lots of problems, since 64-bit Office is incompatible with many things, not just SAPGUI, as you found. Correcting the error by simply reinstalling Office 32-bit resulting in workstations with some 64-bit and some 32-bit components, and that just made things worse. Systems where 32-bit Office was installed from the beginning (on 64-bit OS) had no problems at all.
So, what you're probably going to need to do is to uninstall all Office components (including Outlook, Visio, anything like that, not just Word and Excel), and also uninstall your SAPGUI, then reinstall 32-bit Office (with Outlook) from scratch, then reinstall your SAPGUI. This will probably clear up your problem.
Regards,
Matt

Installing SAP GUI 7.30 in windows server 2008 r2

Hi guys,
Need help in, which patch to be downloaded for SAP GUI 7.30 for windows.
We have installed EHP6 ERP 6.0, the next step is to install GUI.
So, we found that 50120297_6 SAP GUI 7.30 for windows is the GUI we are looking for & downloaded it.
There are some patches to be downloaded too. So, below are screenshot which contains patch list.
Please suggest us which patches to be downloaded. Correct me if anything we have done wrong.

Hi Rafikul,
Thanks for the reply.
Below is the screenshot of SAP Notes 66971,
which shows no patch detail's for Windows server 2008 r2
One question that:
Does we to install all patch from 0 to 8, or only latest patch number 8 is sufficient.

Sap gui on windows terminal server

Hi,
are there best practices to install sap gui 7.30 on a Windows terminal Server 2008 r2?
Regards
Zulma

hi Zulma,
Please follow the step by step guide.
SAP GUI 7.30
Example
How To Install SAP GUI 7.30 on Windows 8
SAP GUI for Java 7.30 Release Notes
Regards,
Jamil

Need to supress 3 min wait notification while installing SAP GUI 7.3

Hi, when installing SAP Gui 7.3 for windows(Patch 9) in a workstation I am getting a 3 minute wait notification at first and after 3 minutes it is getting installed. I need to supress this notification, how can I do that? please help.

Hi
Please can you check the version of nwsapfeilg.dll in C:\Program Files\SAP\SapSetup\setup
The issue was caused by a version conflict. nwsapfeilg.dll.
Complete Installation SAP GUI 720 + Frontend
http://wiki.sdn.sap.com/wiki/x/CIENDw
Please check if this solves the issue.
Regards,
Naveen.

Tips to install Sap Gui On Windows Terminal Server 2003

Does anybody know any method to install SapGui on Windows Terminal Server 2003 to share it to many users ?
The problem is: when I try to install Sap Gui 6.40 via Control Panel-Add/Remove Programs it tells me that I must change the mode with "change user /install". I dont know the reason why it reports me that if I do it via Control Panel. And if I do that and then I launch the installation again it reports me the warning again.
What should I do ?
Thanks in advance for your help.

We have SAP R3 4.6C.
We want to optimize the bandwidth in a 802.11b radio. Because of that we dont want to run any application in the hand-held.
We'll intend to launch a remote desktop on a dozen hand-helds connecting the Windows 2003 Terminal Services server. In this server we could run SAP GUI, WebSapconsole or the browser.
Its important to note that the hand-held computers must only show the designed windows (sized to 16x20), removing title bars, transaction bar, menu bars, tool bars, status bars, etc. For this purpouse I think we can use WebSapconsole.
With this method we have noticed that when a error or warning is displayed it hides some part of the screen instead of presenting in the status bar.
I hope you all your doubts are clear now, if not just tell me.
Thank you.
PS. Sorry for my english.

Installing SAP GUI on windows using Bootcamp on (MACBook)

HI SDN,
I am looking forward to buy MACBook.
Please provide your suggestions on installing SAP GUI on windows using Bootcamp on MACBook?
Are they any issues installing SAP GUI on Mac machine on Windows
OS?
Running Bex Queries, any excel integration issues while running BEx reports on Mac machine with windows Bootcamp?
I really appreciate if you can forward any related information .
Thanks
(Full points will be awarded for helpfull answers)

Hi,
[SAP Mac Users Forum|iPhone & iPad Application Development; is right place for this question

How to install SAP GUI in Windows 8.1

Hi,
Please guide me how to install SAP GUI in OS Windows 8.1
Regards,
Priya

Before installation of SAP GUI we need to know the OS details and the OS system Bits (32 / 64).
NW SAP Setup
• Download the software @ SAP Site using S user login ID.
• Download the Software gui730_0-10010496 (include the patch 6 hotfix 1)
• After download Extract it and go to the path and install.

SAP GUI 7.20 for Windows and problem with Screen Painter

Hello,
I just installed the SAP GUI 7.20 for Windows and it looks good.
But when when I start the Screen Painter for a dynpro I get the following message:
Graphical Layout Editor not available. Continue with alphanumeric editor.
And: EU_SCRP_WN32 Connection broken '..' / CPIC
The SCreen Painter is installed correctly (I can start ist manually from file system) and the RFC destination works.
Any idea?
Regards,
Ole.

Hello,
I've uninstalled all SAP installations, cleaned the registry of Windows XP and deleted all folders with SAP content. Then I've installed the SAP Gui 7.20 again and it works.
And now I will update the Screen Painter with the information from the OSS-Note!
Thank's for your help!
Regards,
Ole.

Unable to install SAP GUI 710

Hi,
I am trying to install SAP GUI 710 on my system which has Windows Vista as the OS. I have downloaded 3 zip files from the SAP Market place. They are
50083078_2.zip
50083078_4.zip
50083078_5.zip.
None of these zip files contain the .exe file which will help me in installing the SAP GUI.
Let me know if there is any other link to download the GUI files.
I do have SAP GUI 470 on my system now.
Thank you in advance.
Shankar.

Hi Dieter,
You are right that there are .exe files in that folder. But when I try to execute them, it says that the exe file NWSAPSETUP.exe is not present in its respective folder. And after that the execution stops.
I doubt that there is something else which i need to do, can you please forward me or let me know the steps involved in implimenting the SAP GUI 710.
Thank you in advance.
Regards,
Shankar.

SAP GUI 6.4 with Windows XP

We have installed an application that uses Bapis with RFC.
The customer has installed SAP GUI 6.4 Patch level 14 and had Windows 2000 and our application run fine.
Now they have changed to SAP GUI 6.4 Patch Level 14 and Windows XP and as soon as we try to use BAPI's our application fails.
has somebody an idea which patch level we should install to avoid such problems?
The file librfc32.dll has the version 6404.4.xxx
thanks
Felix Rast

I would suggest installing the latest patch available at service.sap.com.
Regards,
Rich Heilman

Cannot install SAP GUI 6.4

Hi,
i am getting this error when i try to install SAP GUI 6.4
An error occurred during the installation of component Install SAP Gateway. Press the log view button to get extended error information, press Retry to repeat the current installation step or press OK to terminate the installation. Log files are written to D:\SAPinst SAP PRESENTATION 1 3.
ERROR 2006-09-29 14:42:47
FSL-01001 Existence check of account \SAP_LDAP failed. HRESULT=0x80005000
ERROR 2006-09-29 14:42:47
MOS-01131 Unable to create account ACCOUNTNAME=\SAP_LDAP ACCOUNTTYPE=GROUP CONDITION=TRUE DESCRIPTION=This global group is a domain-level SAP administration group thatallows SAP Systems to update their entries in the Windows 2000 Active Directory. The accounts that run the SAP Systems will later be included in this group giving themwrite access to the Active Directory. MEMBERSHIPSEPARATOR=, OPMODE=CREATE . SOLUTION: Check if you have permissions to create accounts.
ERROR 2006-09-29 14:42:47
MOS-01165 Processing of one or more account operations of table t_SAPGateway_Accounts_Accounts_SHARED failed (operation CREATE).
Any answer would be appreciated

Hi Bhavik,
I mean are you logged onto your Windows XP system with a domain user or local user?
What exactly are you installing? Usually when installing SAP GUI only, you won't have to create accounts on your domain...
Regards,
Pascal

Problemin installing SAP GUI 7.10 Patch level 11

Hi,
I am trying to install SAP GUI 7.10 FRONT END components on windows vista but it is giving the problem that
patch level 11 is not present . We are using the SAP ECC Version 6.4 and i want to install SAP ECC 7.10
front end components on windows vista but it giving the problem .
Plzz provide me guidelines tosolve this problem.

Hello
please download the compialtion 3 cd of sapgui 710.
http://service.sap.com/installations
Entry by Application Group
SAP Frontend Components
SAP GUI FOR WINDOWS
SAP GUI FOR WINDOWS 7.10 CORE
Installation
Compilation 3 cd is delivered with the sapgui patch level 11!
Also the sapgui patche you can find in
http://service.sap.com/patches
Best Regards
Sven

Install SAP GUI 7.20 on Windows terminal server

Similar Messages

Maybe you are looking for