Install sequence and HD Repair

I have an intel MacBook with OS 10.4 (Tiger?) and would like to install snow leopard. I've recently run the Verify Disk function in the Disk Utility application. It reports that my HD needs repaired; the disk has an invalid node structure and the HFS volume needs repaired. I think I can repair the disk using the discs that came with my MacBook to re-install Tiger. Yes?
My questions is what is the best way to repair the HD and install Snow Leopard? Will installing Snow Leopard repair the HD? Should I re-install Tiger and then install Snow Leopard?
Thank you for your help!

Hi, and welcome to the forums.
Allan is correct; Disk Utility most likely can't fix it.
That leaves you with a couple of choices:
Spent about $100 for +Disk Warrior+ (probably a good investment long term), and hope it can fix it; or perhaps less for a different disk repair app.
Or, apply that $100 to a good external HD. While you're at it, get one thats 2-3 times the size of the data on your internal HD (or that you anticipate will be in the next couple of years).
For now, make a "bootable clone" of your system on it, via CarbonCopyCloner or SuperDuper (each has free versions). Test the clone by booting up from it and using your Mac. Once you're sure everything is ok, while booted from the clone, use Disk Utility to erase and reformat your internal HD (make sure it has the GUID Partition Map Scheme). Then re-clone from the clone back to your internal HD. Then boot up and run from the internal.
Wait a few days before upgrading, to isolate any problems with the drive. The last thing you want to do is a major upgrade on a suspect system.
Once you've upgraded, start regular backups. I'd recommend using Time Machine and either CCC or SD, to separate partitions on the external. You'll be a bit safer if you get a second external for one of these, but having both on the same disk is better than having only one.

Similar Messages

Saving Sequence and Effects Presets that go with the project itself

Hi, please be gentle as I'm a newbie to the site.
I have been asked to create several master Premiere Pro projects in CC (templates if you like) that will be being sent to quite a few ops worldwide, many of whom are completely new to the Adobe Platform, so I would like to keep things as simple as I can for them.
Is it possible to create sequence presets and a few effects presets that actually go with the project. At the moment when I've tried opening projects on another machine with a different user account, it overwrites everything with their presets and I can't find anything to stop that from happening. I'm assuming it's to do with sync settings.
However, is there a function to allow premiere pro to open the project with the project's last settings (sequence and effects presets) rather than default to the user prefs? As an aside, I'm not interested in workspace or keyboard shortcuts - that's down to them!
If it's not possible, is there a very simple step-by-step workflow I can use? But I'd really like to avoid trying to explain how to install sequence and effect presets to loads of different ops if I can!!
Finally (wrong forum I know) but I need to do exactly the same thing with the assocated After Effects master template projects, so any help on that would be gratefully received too.
Thanks

Welcome to the forum!
When it comes to effects presets, you should be able to right-click on the Presets in the Effects bin and Export Presets...
The ops can then import the presets using the same method (right-click on the presets in the effects bin and choose Import Presets...)
For sequence presets, I can't find a way to do it within the software. Someone else will probably have to help you find it, but I'm certain there is a file somewhere in your computer that stores all of your Sequence Presets, so it would be a matter of finding and sharing that file with the ops, and then telling them where to put that file.
Hopefully this helps out a little bit!

No internet on Windows 7 Ultimate, already installed drivers and repaired them, but I cannot connect to my university's Wi-Fi. What do I do?

Hello, like I said, I've already used bootcamp to get Windows 7, however I can't connect to the internet.
I've installed the drivers, and even repaired the drivers but I don't know what to do now. Nothing seems to have worked.

You may want to edit your name from screen shots in the future.
On W7, you have a higher version (6.30.223.215) of the 802.11n driver compared to what I have on W8.1 (5.106.199.1).
This is from bootcamp.xml file
<Name>Broadcom 802.11 Network Adapter Driver
<InfName>bcmwl6.inf</InfName>
<Class>Net</Class>
<ClassGUID> {4d36e972-e325-11ce-bfc1-08002be10318}</ClassGUID>
<CatalogFile>BCM43XX64.CAT</CatalogFile>
<Provider>Broadcom</Provider>
<DriverVer>11/13/2012, 5.106.199.1</DriverVer>
<ServiceBinary>bcmwl5.sys</ServiceBinary>
<HardwareID></HardwareID>
<isX64>Both</isX64>
</Name>
Can you check the USB that you built with BC Assistant or manually from Bootcamp downloads to see what you have?
For my model, using System requirements to install Windows on your Mac via Boot Camp - Apple Support, I get Boot Camp Support Software 5.1.5621.

Since installing Yosemite and Photos I can now no longer drag and drop a photo in an email, as I have always done. I repaired permission and restarted a number of times. still not working... Help?! Thanks, Michael

Since installing Yosemite and Photos I can now no longer drag and drop a photo in an email, as I have always done. I repaired permission and restarted a number of times. still not working... Help?! Thanks, Michael

What happens if you use the Share button and select Mail?
What happens when you try? I had to hold there photo there for a short period before it would load.

I am trying to install software and am getting the following prompt.Installation Failed, the installer cant create the folder "var/folders/sq/2fzf3s_d2bzb21159nbwkb2r0000gn/T//install.3732dq0ogT. How do I repair this

I am trying to install software and am getting the following prompt.
"Installation Failed, the installer cant create the folder "var/folders/sq/2fzf3s_d2bzb21159nbwkb2r0000gn/T//install.3732dq0ogT.
How do I repair this

Back up all data. Don't continue unless you're sure you can restore from a backup, even if you're unable to log in.
This procedure will unlock all your user files (not system files) and reset their ownership and access-control lists to the default. If you've set special values for those attributes on any of your files, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it.
Step 1
If you have more than one user account, and the one in question is not an administrator account, then temporarily promote it to administrator status in the Users & Groups preference pane. To do that, unlock the preference pane using the credentials of an administrator, check the box marked Allow user to administer this computer, then reboot. You can demote the problem account back to standard status when this step has been completed.
Triple-click the following line on this page to select it. Copy the selected text to the Clipboard (command-C):
{ sudo chflags -R nouchg,nouappnd ~ $TMPDIR.. ; sudo chown -R $UID:staff ~ $_ ; sudo chmod -R u+rwX ~ $_ ; chmod -R -N ~ $_ ; } 2> /dev/null
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window (command-V). You'll be prompted for your login password. Nothing will be displayed when you type it. You may get a one-time warning to be careful. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
The command will take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear, then quit Terminal.
Step 2 (optional)
Take this step only if you have trouble with Step 1 or if it doesn't solve the problem.
Boot into Recovery. When the OS X Utilities screen appears, select
Utilities ▹ Terminal
from the menu bar. A Terminal window will open.
In the Terminal window, type this:
res
Press the tab key. The partial command you typed will automatically be completed to this:
resetpassword
Press return. A Reset Password window will open. You’re not going to reset a password.
Select your boot volume ("Macintosh HD," unless you gave it a different name) if not already selected.
Select your username from the menu labeled Select the user account if not already selected.
Under Reset Home Directory Permissions and ACLs, click the Reset button.
Select
 ▹ Restart
from the menu bar.

I have Photoshop 12, installed online. My computer crashed and was repaired, but Photoshop was not restored. I see it in my products, along with the serial number/activation key, but no download is available. How do I re-download my product?

I have Photoshop 12, installed online. My computer crashed and was repaired, but Photoshop was not restored. I see it in my products, along with the serial number/activation key, but no download is available. How do I re-download my product?

Unfortunately, only Adobe customer service can assist you with your issue. These are user forums; you are not addressing Adobe here.
Click on the link below, and after that click on "Still need Help? Contact us."
Then on the next page, click Chat.
There is also a phone option. 1 (800) 833-6687
http://helpx.adobe.com/contact.html?step=PHXS_downloading-installing-setting-up_licensing- activation

My install of maverick failed as disk is damaged and cannot repaired. I tried to erase disk but got error that disk cannot be umounted. Please help! Thank you very much.

My install of maverick failed as disk is damaged and cannot repaired. I tried to erase disk but got error disk cannot be unmounted. Please help. What can i do? Thank you very much.

First have you got a backup of your data? If not try to get one now while you have some access to the drive. The drive is probably faulty and will need to be replaced, without the backup you risk losing the data.
Have you a bootable external USB drive with Mavericks on it, if so boot from that and try and repair or erase the drive and reinstall Mavericks.
If you don't have Mavericks on an external drive, boot from you Leopard DVD ( I am presumimg your profile is correct) and run Disk Utility from there, you may be able to erase the drive and reload Leopard. You can then install Mavericks. Even if all that works you will most likely need a new drive in the near future.

When I move my mouse Itunes stops playing. This was happening before I installed latest version. I have installed latest version three times. First and install, then as a repair, and third time I unistalled Itunes and reinstalled i.

when I move my mouse Itunes stops playing music. Sometimes this happens immediatly and sometime it take 10 to 15 sec. I tried playing Itunes and then tabing another program but same result. If I click on play and do not move mouse Itunes works as usual.. This was happening before I installed latest version. I have installed latest version three times. First and install, then as a repair, and third time I unistalled Itunes and reinstalled i.

when I move my mouse Itunes stops playing music. Sometimes this happens immediatly and sometime it take 10 to 15 sec.
At various stages over the years, mouse-related iTunes trouble has been associated with driver conflicts. So it might be worth following up on that possibility.
Head to the drivers and downloads page for your model of PC, and check to make sure you're not behind on any chipset and input-device-related driver updates. (And while there, just in case, also check to make sure your BIOS, sound-card/integrated audio, and video-card/display-adaptors are up to date.)
If you're behind on anything, and you update, does that help with the mouse-related iTunes issues?

Having trouble communicating with ipod says software was not installed correctly and then asks if i want it repaired but couldnt need help

Having trouble communicating with i pod says software was not installed correctly and asks if i want it repaired but then says could not be repaired.Installed uninstalled numerous times but nothing dont know what else to do.

See the second box of Troubleshooting issues with iTunes for Windows updates.
tt2

Installing "Applications" during the task sequence and installation enforcement

Hello,
Kind of a weird question here, so it seems like I'm seeing that if you install an application on a system during its OSD task sequence, then you later manually uninstall that application, that SCCM considers that system now out of compliance?
And then reinstalls the application as indicated in AppEnforce.log? Is this true? If so, how do you get around this behavior? I guess I thought that this application compliance only took effect when you actually deploy an application to a
system, through an actual deployment. I didn't realize that it would enforce compliance even if an application was installed during a task sequence. So if you have hundreds of systems that were imaged with the same task sequence and you have
a small handful of machines that can't have application X on it (so you want to uninstall it), which was installed via the task sequence, how do you disable this compliance enforcement and disable its automatic reinstall?
Thanks for any help you can provide.

Sorry for the delayed response, thank you both for your input. To answer both your questions, no these workstations do not have any required deployments for this application directed at them. I have confirmed that, however, they do have
the OSD task sequence deployment (that contains this application) constantly "available" to them (via only "media and PXE") as this makes it very easy for our technicians to reimage any machine whenever they need to (love that feature
by the way).
I can only assume that because they still have this task sequence deployment pointed at them is why they continue to attempt to reinstall this application when ConfigMgr finds that it's not installed anymore. In fact it does it at the same day/time
each week, which I believe is the same day/time of the week that the machines were imaged. I must have the compliance part of the clients configuration to check every 7 days for stuff like this? Anyway, that's my conclusion for now.
Since even Wally Mead felt that this must be an actual required deployment outside of the task sequence I'm really curious to see if anyone else sees this behavior. It would be fairly simple to attempt to recreate, image a machine with a task sequence
that has "application" installs included, where the deployment for it is just "available" and keep the deployment "available" after the machine is reimaged. Then after that, uninstall one of the apps that was installed
during the task sequence via an "application" and then see if it reinstalls automatically, it may wait a while (may 7 days by default?). You can see the evidence of our application reinstalling itself in the "AppEnforce.log".
Is it even remotely possible that this is a new "feature" or behavior of ConfigMgr 2012 and "Applications"?

Install sequence: WAS oracle and WAS SAPDB?

I am instaling XI 2.0, and find the documentation ok but need some clarification.
I have install WAS 6.20 on oracle 92, not reading through the installation manual, I can install IS (integration server)..but I need a separate WAS install running on SAPDB if I want to install Inegration Builder (IB)?
I am installing on single box so does that make sense that I need to install WAS 62 on oracle and was 620 on sapdb on a single host in order to use both IS and IB?
Has anyone successfully installed IS and IB on single host?
Would like to here any suggestion or pitfalls...
Thanks
John Ryan

John,
sorry, but I didn't install XI myself. This did a collegue of mine. Perhaps you should have a look at the Document "Unicode SAP Web Application Server 6.20 on UNIX: SAP DB". Chapter "3.4 System Configuration" decribes a little bit of your requested information.
> Also if I want to stay with oracle running IS, which
> is our environment DB for all of our systems.....is
> it ok to install WAS SAPDB on a separate box? are
> there any issue with this?
According to the "XI 2.0 - Technical Infrastructure Guide" this shuold be Ok. You can have SLD and IS on an Oracle installation on one box and the IB on a SAP DB installation on another box.
Regards,
Marc

Lenovo Yoga 2 13, Kali Linux 1.0.7, Ubuntu 14.04, Windows 8.1 install, config, and wifi fix.

Lenovo Yoga 2 13, Kali Linux 1.0.7, Ubuntu 14.04, Windows 8.1 install, config, and wifi fix.
I wanted to share an experience with everyone I hope will help others avoid what I have gone through the past 3 days. I bought a Yoga 11s that I loved but had some issues with the wireless, Lenovo being awesome replaced it with a Yoga 2 13. I love this laptop but ran into some issues with Linux install/wireless, which I wanted to show how to resolve in one place. Hopefully this will help someone else get through this quicker
I am going to try and write this for someone with little Linux experience, if I miss the mark please let me know and I will clarify the best I can.
For work I need Windows 8.1 and Kali Linux, while for home I prefer Ubuntu.
My Yoga 2 13:
I5 1.6 ghz
8 GB ram
256 GB SSD
ORANGE!
My requirements:
I need Windows
I need Kali Linux (livecd, even with persistent mode was not an option as it would not save the wireless fix or system updates) – I would also like this on a USB drive and not the internal SSD
I would like Ubuntu
Needed to do this:
1. 2 USB thumb drives (at least 8gb in size each) I used 2 Leef Supra 32GB drives. They are my favorite right now and are only about $27 at amazon.
2. Phone that can USB Tether or a USB Ethernet card (External USB wireless will show as "Hardware Locked"). Again you can pick one up for sub $10 if you need the USB Ethernet route. I used my Galaxy S5, you will need to download 200-300 mb of items through this so make sure you have the data if you go that route.
3. You may be able to get a USB wifi card to work if you do the following after boot. This only worked once for me.
                a.Type ‘sudo rmmod iwlmvm’
b.Type ‘sudo rmmod iwlwifi’
4. ISOs of Ubuntu and Kali Linux (I used Ubuntu 14.04 and Kali Linux 1.0.7)
5. Software to unzip the ISOs. I recommend 7-ZIP and will be referencing this in this guide.
6. I will include the EFI boot files and the WiFi fix files if I can attach. Otherwise I will provide a link to them.
   Link: https://www.dropbox.com/s/puxnnoft3gn2b6l/WiFiFix.zip
Recommended (these are just in case you corrupt something making your system not see any OS
1. I would call Lenovo beforehand and get a set of recover disks (this will take 2-3 days)
2. In the meantime a USB Windows 8.1 or 8 ISO (the repair feature may save you)
*Note: At many points in this guide I detail steps and commands. Please double check that you understand the step before proceeding. There are multiple points where a mistyped command or clicking the wrong option will cause your entire system to fail and you will need to reformat the entire drive and start over. This also will make One Touch recovery not work. Proceed with caution.*
I did not need to disable ‘secure boot’ to do this, but keep in mind that you may need to.
Steps:
First let’s go through the installs, and then we will go through grub config and wireless fix
1. In Windows scroll to computer and right click, select manage.
2. Go to “Disk Management”
3. Select the main HDD (notice Lenovo puts a stupid number of partitions on here)
a. I deleted the D: drive on here, if you do this make sure to copy the drives over to your main C: drive. You will want to run each of the installers and repair the drivers after.
4. I used the space from the D: drive and pulled a little more creating a 50 GB partition for Ubuntu and my swap file
a. You can also add more space by right clicking your C drive and selecting shrink
b. Do not format the partitioned data as this will make identifying it later much easier.
5. Open a command line
                a. Swipe from the right of the screen and select search
                b. Type ‘cmd’
                c. right click and select ‘run as admin’
6. For Ubuntu: Type ‘diskpart’ into the command line
                a. type ‘list disk’
i. You should see 2-3 disks depending on if you have one or both usb drives in the laptop at the time. I would suggest only doing 1 at a time so you don’t lose track.
                b. type ‘select disk $’ (Replace the $ with the number of the drive)
c. ***** Before proceeding make sure you have the correct drive selected or you can ruin your Windows install and Lenovo one touch recovery will not fix it since we have changed the partitions *****
d. type ‘clean’
e. type ‘create partition primary’
f. type ‘active’
g. type ‘format fs=fat32 quick’
h. type ‘assign’
i. type ‘exit’
6. For Kali Linux: Type ‘diskpart’ into the command line
                a. type ‘list disk’
i. You should see 2-3 disks depending on if you have one or both usb drives in the laptop at the time. I would suggest only doing 1 at a time so you don’t lose track.
                b. type ‘select disk $’ (Replace the $ with the number of the drive)
c. ***** Before proceeding make sure you have the correct drive selected or you can ruin your Windows install and Lenovo one touch recovery will not fix it since we have changed the partitions *****
d. type ‘clean’
e. type ‘create partition primary size= 3272
f. type ‘active’
g. type ‘format fs=fat32 quick’
h. type ‘assign’
i. type ‘exit’
j. By doing this we can maintain a portion of this drive as the install CD and still have linux install/ liveCD if we need to run it on another machine.
7. At this point the drive is ready to have the contents of the ISO copied over.
8. Right click the ISO and select 7-zip then ‘zip to /’ This should unzip the ISO to the location of the ISO into a folder named exactly the same as the ISO.
9. Once this is done for Ubuntu ISO it is done
10. Kali requires a little bit more to be ready
                a. Kali will need some files added for EFI boot. --$--
                               i. Thanks to: https://forums.kali.org/showthread.php?271-How-to-EFI-install-Kali-Linux
                               ii. EFI files are located within the wifi fix folder https://www.dropbox.com/s/puxnnoft3gn2b6l/WiFiFix.zip
11. Now let’s start with Ubuntu
Ubuntu install
1.     Place USB drive into the laptop and press the “Lenovo boot” button next to the power button
2.     Select ‘Boot Menu’
3.     Select ‘EFI USB Device (Name of drive)’ Mine stated Leef Supra
4.     Select ‘install Ubuntu’
5.     Go through the Ubuntu install until you get to select the install drive
6.     Once you get to the install portion it will ask you to select from one of 4 options. Select ‘Manually select partition’
7.     Select the “Free Space” where we opened up some of the drive
8.     You will need to create 2 partitions, I usually create the swap partition at the end of the drive
a.     First I create the swap
                                          i.    Set at the end of the drive
                                         ii.    Set size to 1024 mb
                                        iii.    Set type to ‘swap’
b.     Second create the ext 4 partition
                                          i.    Set to beginning of drive
                                         ii.    Set to remainder of the space
                                        iii.    Set type to ext4
                                        iv.    Set mount point to /
9.     Finish the install and boot into Ubuntu
10.   You will notice that your wireless is ‘disabled by hardware’ This is fine for the time being and we will worry about this after the kali install. If we fix it now for some reason after installing kali we get the error again and would just need to fix it again.
Kali Linux install
1.     Place USB drive into the laptop and press the “Lenovo boot” button next to the power button
2.     Select ‘Boot Menu’
3.     Select ‘EFI USB Device (Name of drive)’ Mine stated Leef Supra
4.     From the grub menu select ‘install kali linux’ both graphical and text work. I much prefer text install
5.     You will get a few errors through the install but that is fine
6.     The first we see is about network hardware and ‘load missing firmware from removable media?’ – Select ‘no’
7.     Then select no ethernet card
8.     It will have you name your machine then it will ask you for the root password
a.     If you want to just use root *not recommended* place the password here
b.     If you wish to use a non-root account then leave these blank and it will ask you for a name, username, and password of the new machine *Very Recommended* - this will also add this user to the sudoers file
9.     It will then ask you to ‘partition disks’
10.   Select manual
11.   Now here is where it can get a little confusing so read twice click once
12.   Select the USB drive from this list
13.   Mine shows up under (sdb) – Leef Supra
a.     It could be sdc, sdd, sde, etc… depending on how many drives you have plugged in.
14.   You should see one primary drive that is 3gb or so that is formatted as FAT32. – DO NOT TOUCH THIS PARTITION!
15.   You should see the remainder of this drive as ‘FREE SPACE’ select that
16.   Create a partition at the end at size 1024mb and swap
17.   Then create another one for the remainder of the drive and set it to ext4 with mountpoint of /
18.   Continue through the install after you should see an error warning you that ‘you may not be able to boot’ that is fine, select continue
19.   Then select from the menu of all the options ‘continue without bootloader’
20.   It should finish up then reboot on its own.

First setup/boot/fix grub
1.     You should be able to boot up into GRUB2 menu now.
2.     You may not see kali linux in this menu (make sure you have your towel and don’t panic!)
3.     Boot into Ubuntu
4.     Once you log in you should see that you still cannot use wireless due to being locked by hardware
5.     This is expected
6.     Let’s fix grub then we will come back to fixing wireless
7.     Plug in your device to connect to the internet (USB Tethering or USB Ethernet)
8.     Once you verify that you now have an internet connection run the following from terminal
a.     ‘sudo add-apt-repository ppa:danielrichter2007/grub-customizer’
b.     ‘sudo apt-get update’
c.     ‘sudo apt-get install grub-customizer’
9.     You can also edit the grub.cfg manually if you know what you are doing… I did not
10.   Open grub customizer
11.   It should auto populate and you should see ‘debian (kali linux)’ somewhere in the list
12.   It should be mounted to /dev/sdb2 or /dev/sdc2 depending on how many devices you have
13.   At this point go ahead and save
14.   Reboot and test that you can get into each OS
15.   This is where my inexperience got me. I spent 2 of my days so I am including this error: If when you boot into Kali you get an error somewhere that says ‘/bin/sh: can’t access tty: job control turned off’ look above it for an error that looks similar to ‘ALERT! /dev/sdc2 does not exist. Dropping to a shell!!’
a.     That error is due to the mount point being incorrect in grub, reboot and from within grub highlight the kali boot. Press ‘e’ then towards the bottom you should see ‘root=/dev/sdc2’ change this to ‘root=/dev/sdb2’ again the number doesn’t matter just make sure it stays the same.
b.     Press F10
c.     If this boots fine then you will need to go back and fix the grub.cfg or load into Ubuntu and open grub customizer again, it should fix this
16.   Now you have 3 working OS on the machine with one being on a USB! Congrats!
17.   You can remove the USB with no worry of screwing up your install, but you will not be able to boot into Kali Linux until you replace it. I would suggest only removing it and replacing it while the machine is powered off, but that’s just me.
Fix Wireless
Now is the time to do what probably ¾ of you came here for. FIX THE DANG WIRELESS. This is a huge problem from Lenovo’s side that I hope they realize how important Linux is and will fix. I won’t hold my breath though.
Log into Ubuntu : This is well documented in the following forum post on page 3 by user Haohe:
http://ubuntuforums.org/showthread.php?t=2215044&page=3
His has you download quite a large file, mine should be much smaller.
https://www.dropbox.com/s/puxnnoft3gn2b6l/WiFiFix.zip
1.     Download the attached package with the fix.
2.     Connect your USB internet device (tether or ethernet)
3.     Place the packages somewhere easy to access, in this example I will place them under ~/Desktop/WiFiFix
4.     Type ‘cd ~/Desktop/WiFiFix/’
5.     Now we need to prep the tools we need.
6.     Type ‘sudo apt-get update’ – we did this before, but you know, just in case
7.     Type ‘sudo apt-get install linux-headers-`uname –r`’   Note around uname-r they are the ` symbol not the ‘ this is located just above the tab on the same key as ~.
8.     Type ‘make’
9.     Type ‘sudo cp /lib/modules/3.13.0-24-generic/kernel/drivers/platform/x86/ideapad-laptop.ko ~/ideapad-laptop.ko.backup’
10.   Type ‘sudo cp ~/Desktop/WiFiFix/ideapad-laptop.ko /lib/modules/3.13.0-24-generic/kernel/drivers/platform/x86/’
11.   Type ‘sudo modprobe -r ideapad-laptop’
12.   Type ‘sudo modprobe ideapad-laptop’
13.   Type ‘sudo rfkill unblock all’
14.   Type ‘sudo modprobe -r ideapad-laptop’
15.   Type ‘sudo mv ~/ideapad-laptop.ko.backup /lib/modules/3.13.0-24-generic/kernel/drivers/platform/x86/ideapad-laptop.ko’
16.   Next we need to blacklist the ideapad module
17.   Type ‘sudo echo 'blacklist ideapad-laptop' > /etc/modprobe.d/blacklist-ideapad.conf’
a.     The first time I tried this it wouldn’t work. So I did the following
b.     ‘sudo touch /etc/modprobe.d/blacklist-ideapad.conf’
c.     ‘sudo vim /etc/modprobe.d/blacklist-ideapad.conf’
d.     Enter     blacklist ideapad-laptop
e.     Exit and save
18.   Reboot your Yoga 2 13
19.   Boot into kali and see if you have wireless, if you do then you are done. If not we will need to repeat this process with one small little change.
Kali Wifi Fix
1.     Copy the sources.list from the package provided
2.     Replace /etc/apt/sources.list with the included
3.     Some of the file path changes but the process remains the same from here.
Congratulations you now have 3 OSes one portable to other machines and working wifi!
Thank you
SirGed

Windows Update in Endless Loop of 'Installing updates" and "Undoing changes" on New Windows 8.1 Pro Install

I am setting new Windows 8.1 Pro computers, and am installing Windows 8.1 Pro to bare drives. Everything goes fine until Windows Update starts installing updates, and then the computer goes for hours installing updates, and then "We
could not complete the updates Undoing changes". It's an endless loop. It seems to be the same 38 updates. This is a recent phenomenon. I have not run into this until the last week or two on several new computer installs.
Again these are brand new installs, so something is clearly wrong with the Windows updates.
If anyone can please tell me how to avoid this, it would be much appreciated.
Michael

Hi Michael,
" This is a recent phenomenon"
Have you made any modifications to the machines ?
To resolve this issue ,running the built-in troubleshoot tool is a very good beginning .It will automatically diagnostic the windows update components and check the configurations for us .
Control Panel\All Control Panel Items\Troubleshooting\Fix problems with Windows Update
If there are antivirus software installed in these machines, please turn off them temporarily to have a check.
The command line included in the link as S.Sengupta posted is very useful and convenient to repair the windows corrupted files .We can have a try .
"sfc /scannow" ,"DISM.EXE /online /cleanup-image /restorehealth "
We also can check the windowsupdate.log for more information to troubleshoot this issue .
Run "windowsupdate.log"
If you have trouble in analyzing the log ,please upload them to the OneDrive and paste the link here .
Best regards

DVD drive issue and permissions repair

Forgive me if I'm combining two issues in this posting. If they are not related I can separate them out.
I don't know if my drive is going, but I have a DVD for a tv show that I wanted to watch on my Macbook Pro running Snow Leopard (latest patches). For a while now I've had to keep reinserting the disc because it's not registering. I put it in, and can hear mechanisms, then it spits it back out.
I watched one disc, ejected it then tried to play another and it just would not load.
I thought of checking disk permissions, thinking maybe the OS had some permissions problems that may be preventing it from reliably reading the disc. The disk utility reported a number of permissions errors and owner errors, so I repaired the permissions and it reported that it was completed successfully. I thought I'd run the verify permissions again, just to make sure the errors had really been repaired, and they're still there - some of them were gone, but there were others reported. I ran the repair and verify a number of times now and nothing's changed.
My questions:
1. Could the problem I'm seeing with my DVD drive be related to permissions of some of the system files?
2. Do I have anything to worry about with the disk permissions not appearing to be repaired?
3. Would I gain anything by booting to install media and running the verify and repair from there?
Thanks much in advance!

Could the problem I'm seeing with my DVD drive be related to permissions of some of the system files?
If you've repaired permissions, and you still have the problem, then the answer is no.
Do I have anything to worry about with the disk permissions not appearing to be repaired?
Mac OS X: Disk Utility's Repair Disk Permissions messages that you can safely ignore
Would I gain anything by booting to install media and running the verify and repair from there?
No.

I installed Yosemite and now my computer is slow when logging in. Also when I type my password the screen images are distorted. After that my home screen appears and everything seems normal. What can I do to fix this?

I installed Yosemite and now my computer is slow when logging in. Also when I type my password, a bar appears measuring the process and then all of a sudden the screen images are distorted. After that my home screen appears and everything seems normal. What can I do to fix this?
Here is what the etrecheck results are:
Problem description:
slow at start up, screen is distorted while logging in, it is fine after
EtreCheck version: 2.1.8 (121)
Report generated April 5, 2015 at 9:42:01 AM PDT
Download EtreCheck from http://etresoft.com/etrecheck
Click the [Click for support] links for help with non-Apple products.
Click the [Click for details] links for more information about that line.
Hardware Information: ℹ️
    MacBook Pro (13-inch, Early 2011) (Technical Specifications)
    MacBook Pro - model: MacBookPro8,1
    1 2.3 GHz Intel Core i5 CPU: 2-core
    4 GB RAM Upgradeable
        BANK 0/DIMM0
            2 GB DDR3 1333 MHz ok
        BANK 1/DIMM0
            2 GB DDR3 1333 MHz ok
    Bluetooth: Old - Handoff/Airdrop2 not supported
    Wireless: en1: 802.11 a/b/g/n
    Battery Health: Normal - Cycle count 297
Video Information: ℹ️
    Intel HD Graphics 3000 - VRAM: 384 MB
        Color LCD 1280 x 800
System Software: ℹ️
    OS X 10.10.2 (14C109) - Time since boot: 0:7:0
Disk Information: ℹ️
    Hitachi HTS545032B9A302 disk0 : (320.07 GB)
        EFI (disk0s1) <not mounted> : 210 MB
        Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
        Macintosh HD (disk1) / : 318.84 GB (174.85 GB free)
            Encrypted AES-XTS Unlocked
            Core Storage: disk0s2 319.21 GB Online
    MATSHITADVD-R   UJ-898
USB Information: ℹ️
    Apple Inc. Apple Internal Keyboard / Trackpad
    Apple Inc. BRCM2070 Hub
        Apple Inc. Bluetooth USB Host Controller
    Apple Inc. FaceTime HD Camera (Built-in)
    Apple Computer, Inc. IR Receiver
Thunderbolt Information: ℹ️
    Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
    Mac App Store and identified developers
Kernel Extensions: ℹ️
        /System/Library/Extensions
    [not loaded]    com.devguru.driver.SamsungComposite (1.1.0) [Click for support]
    [not loaded]    com.logmein.driver.LogMeInSoundDriver (1.0.3 - SDK 10.5) [Click for support]
        /System/Library/Extensions/ssuddrv.kext/Contents/PlugIns
    [not loaded]    com.devguru.driver.SamsungACMControl (1.1.0) [Click for support]
    [not loaded]    com.devguru.driver.SamsungACMData (1.1.0) [Click for support]
Startup Items: ℹ️
    HP Trap Monitor: Path: /Library/StartupItems/HP Trap Monitor
    Startup items are obsolete in OS X Yosemite
Problem System Launch Daemons: ℹ️
    [failed]    com.apple.ucupdate.plist
    [failed]    com.apple.watchdogd.plist [Click for details]
Launch Agents: ℹ️
    [not loaded]    com.google.keystone.agent.plist [Click for support]
    [not loaded]    com.hp.help.tocgenerator.plist [Click for support]
    [not loaded]    com.logmein.LMILaunchAgentFixer.plist [Click for support]
    [not loaded]    com.logmein.logmeingui.plist [Click for support]
    [not loaded]    com.logmein.logmeinguiagent.plist [Click for support]
    [not loaded]    com.logmein.logmeinguiagentatlogin.plist [Click for support]
Launch Daemons: ℹ️
    [not loaded]    com.adobe.fpsaud.plist [Click for support]
    [not loaded]    com.google.keystone.daemon.plist [Click for support]
    [not loaded]    com.logmein.logmeinblanker.plist [Click for support]
    [not loaded]    com.logmein.logmeinserver.plist [Click for support]
    [not loaded]    com.logmein.raupdate.plist [Click for support]
    [not loaded]    com.microsoft.office.licensing.helper.plist [Click for support]
User Launch Agents: ℹ️
    [not loaded]    com.adobe.ARM.[...].plist [Click for support]
    [not loaded]    com.facebook.videochat.[redacted].plist [Click for support]
    [not loaded]    com.google.GoogleContactSyncAgent.plist [Click for support]
User Login Items: ℹ️
    iTunesHelper    UNKNOWN Hidden (missing value)
    AdobeResourceSynchronizer    Application Hidden (/Applications/Adobe Reader.app/Contents/Support/AdobeResourceSynchronizer.app)
    Android File Transfer Agent    Application (/Users/[redacted]/Library/Application Support/Google/Android File Transfer/Android File Transfer Agent.app)
    HP Product Research    Application (/Library/Application Support/Hewlett-Packard/Customer Participation/HP Product Research.app)
    HPEventHandler    Application (/Library/Printers/hp/hpio/HPEventHandler.app)
Internet Plug-ins: ℹ️
    o1dbrowserplugin: Version: 5.40.2.0 - SDK 10.8 [Click for support]
    LogMeInSafari64: Version: 1.0.660 [Click for support]
    Default Browser: Version: 600 - SDK 10.10
    Silverlight: Version: 5.1.10411.0 - SDK 10.6 [Click for support]
    FlashPlayer-10.6: Version: 17.0.0.134 - SDK 10.6 [Click for support]
    LogMeIn: Version: 1.0.660 [Click for support]
    Flash Player: Version: 17.0.0.134 - SDK 10.6 [Click for support]
    LogMeInSafari32: Version: 1.0.660 [Click for support]
    QuickTime Plugin: Version: 7.7.3
    googletalkbrowserplugin: Version: 5.40.2.0 - SDK 10.8 [Click for support]
    AdobePDFViewer: Version: 10.0.1 [Click for support]
    SharePointBrowserPlugin: Version: 14.1.0 [Click for support]
    iPhotoPhotocast: Version: 7.0 - SDK 10.7
3rd Party Preference Panes: ℹ️
    Flash Player [Click for support]
Time Machine: ℹ️
    Time Machine not configured!
Top Processes by CPU: ℹ️
         7%    ocspd
         4%    WindowServer
         1%    kextd
         0%    ps
         0%    securityd
Top Processes by Memory: ℹ️
    137 MB    Microsoft Word
    120 MB    Safari
    86 MB    ocspd
    82 MB    CalendarAgent
    77 MB    WindowServer
Virtual Memory Information: ℹ️
    310 MB    Free RAM
    1.89 GB    Active RAM
    1.55 GB    Inactive RAM
    544 MB    Wired RAM
    1.13 GB    Page-ins
    8 KB    Page-outs
Diagnostics Information: ℹ️
    Apr 5, 2015, 09:32:47 AM    Self test - passed
    Apr 5, 2015, 09:30:05 AM    /Users/[redacted]/Library/Logs/DiagnosticReports/AdobeResourceSynchronizer_2015 -04-05-093005_[redacted].crash
    Apr 4, 2015, 01:12:41 PM    /Users/[redacted]/Library/Logs/DiagnosticReports/AdobeResourceSynchronizer_2015 -04-04-131241_[redacted].crash
    Apr 4, 2015, 08:13:57 AM    /Users/[redacted]/Library/Logs/DiagnosticReports/AdobeResourceSynchronizer_2015 -04-04-081357_[redacted].crash

Reinstalling OS X Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Reinstalling OS X Without Erasing the Drive
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility and press the Continue button. After Disk Utility loads select the Macintosh HD entry from the the left side list. Click on the First Aid tab, then click on the Repair Disk button. If Disk Utility reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit Disk Utility and return to the main menu.
Reinstall OS X: Select Reinstall OS X and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
Alternatively, see:
Reinstall OS X Without Erasing the Drive
Choose the version you have installed now:
OS X Yosemite- Reinstall OS X
OS X Mavericks- Reinstall OS X
OS X Mountain Lion- Reinstall OS X
OS X Lion- Reinstall Mac OS X
     Note: You will need an active Internet connection. I suggest using Ethernet
                 if possible because it is three times faster than wireless.

Install sequence and HD Repair

Similar Messages

Maybe you are looking for