Install sharepoint 2010 on windows 8.1 enterprise
I would like to install sharepoint server 2010 on windows 8.1 enterprise without Hyper-V as the organization policy does not allow us to user Hyper-V. At the end of the installation while sharepoint configuration wizard is running, it thre a "Configuration
Failed" exception. Failed to create configuration database as shown below. Kindly help.
The instructions for installing SharePoint 2010 on Windows 8 are pretty much the same as they were on Windows 7 x64. You do still need to make sure you create the custom config file to do the install. You can find a full set of instructions
to install on Windows 7 on my blog here:
http://www.dontpapanic.com/blog/?p=96
The one additional thing you need to do is make sure that when you install IIS you are using ASP.net 2.0 instead of ASP.Net 4.0. Windows 8 will default to 4.0. You can read more about that here:
http://johnlivingstontech.blogspot.com/2011/09/installing-sharepoint-2010-on-windows-8.html
I should however point out that although you can install SharePoint 2010 on Windows 8 its not really a supported platform and even on Windows 7 its only supported as a Dev environment. Its never been supported for any kind of production usage.
Paul Stork SharePoint Server MVP
Principal Architect: Blue Chip Consulting Group
Blog: http://dontpapanic.com/blog
Twitter: Follow @pstork
Please remember to mark your question as "answered" if this solves your problem.
Similar Messages
-
I cant install any games on windows 8.1 enterprise
When i try to install a game on windows 8.1 enterprise, the setup menu shows up for about 30 seconds the closes
with no error message. ive tried running it as administration, windows 7 and turning internet off and turning my anti virus off also re installing my OS
the games ive tried:
shadows of mordor
borderlands the pre sequel
watch dogs
portal 2
Ive got a gaming pc so the spec isent the problem and theres newt wrong with the games ive used them on my laptop and
im having no problem installing anything else,. i did manage to install minecraft but anything higher than that wont install, please can someone help me as im completely stuck on what to do nextyes all these games are original and the only reason i believe it might be my windows is due the fact the games worked fine before i updated from windows 8 to windows 8.1 and all the games work fine on my laptop
ive looked in event viewer its coming up with this ( restart manager )
Log Name: Application
Source: Microsoft-Windows-RestartManager
Date: 25/01/2015 02:24:43 PM
Event ID: 10000
Task Category: None
Level: Information
Keywords:
User: HOME\
Computer: Home
Description:
Starting session 2 - 2015-01-25T14:24:43.834252000Z.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-RestartManager" Guid="{0888E5EF-9B98-4695-979D-E92CE4247224}" />
<EventID>10000</EventID>
<Version>0</Version>
<Level>4</Level>
<Task>0</Task>
<Opcode>0</Opcode>
<Keywords>0x8000000000000000</Keywords>
<TimeCreated SystemTime="2015-01-25T14:24:43.834252000Z" />
<EventRecordID>703</EventRecordID>
<Correlation />
<Execution ProcessID="4960" ThreadID="5908" />
<Channel>Application</Channel>
<Computer>Home</Computer>
<Security UserID="S-1-5-21-1752165112-3586141411-2308531223-1001" />
</System>
<UserData>
<RmSessionEvent xmlns="http://www.microsoft.com/2005/08/Windows/Reliability/RestartManager/">
<RmSessionId>2</RmSessionId>
<UTCStartTime>2015-01-25T14:24:43.834252000Z</UTCStartTime>
</RmSessionEvent>
</UserData>
</Event> -
I have installed SharePoint 2010 Server SP2. Central Administration shows the configuration database is at 14.0.7015.1000. I had to run PSConfig several times before it completed successfully due to missing features, setup files, etc. But
I got those cleaned up and finally got PSConfig to complete.
However, when I go to Farm Information it still shows "Upgrade Available" for the single WFE server we have.
When I run stsadm.exe -o localupgradestatus it shows me the following:
[2] content database(s) encountered.
[0] content database(s) still need upgrade or cannot be upgraded.
[23] site collection(s) are contained in the content databases.
[0] site collection(s) still need upgrade.
[53] other objects encountered, [12] of them still need upgrade or cannot be upgraded.
The 12 objects that cannot be upgraded are ancillary databases like:
StateService_[GUID]
Secure_Store_Service_DB_[GUID]
PerformancePoint Service Application_[GUID]
They all show "Cannot Upgrade" for the status.
Am I correct in thinking these are what's keeping the status at Upgrade Available? And if so how can I resolve?
If not, what else can be done to change that Upgrade Available status?
My goal is to get SP2 and the latest CU applied before trying to reinstall the User Profile Service.
Thank you.use psconfig via command line:
> PSCONFIG.EXE -cmd upgrade -inplace b2b -wait
Scott Brickey
MCTS, MCPD, MCITP
www.sbrickey.com
Strategic Data Systems - for all your SharePoint needs -
Windows Server 2008 hangs in "Applying computer settings" after installing Sharepoint 2010
Hi!
I have a server which is designated to be a Sharepoint server, I have successfully installed the server, SQL server R2 and Sharepoint 2010, but right after Sharepoint Server 2010 is installed the nex time I reboot the machine it hangs in "Applying computer
settings" I have tried reinstalling the server several times, improving the server specs.
The installations run just fine I can even see the sharepoint site, and make any configuration, the issue comes when I restart the server (for updates for example..)
Can someone help me with this issue?
Thanks in advance
Carlos R Vargas MHi,
It may take some time for configuration after the new installation. Please wait patiently. If it still hangs, please refer to the following article:
KB article 2379016
A computer that is running Windows Vista or Windows Server 2008 stops responding at the "Applying User Settings" stage of the logon process.
http://support.microsoft.com/kb/2379016
Tim Quan -
Sharepoint 2010 on Windows 2012R2 and claims based authentication
Hello,
We have installed a sharepoint 2010 SP2 CU dec 2014 on a Windows 2012R2 server.
The installation went without problems.
However, we want to use claims based authentication on a certain web app pool.
Therefore some configuration on IIS is required.
The first issue we ran into, is the web application pool uses ASP.NET 2.0, which is the default settings.
However, using this ASP.NET Version 2.0 the feature "Providers" and ".net users" are invisible.
When changing the .net version to 4.0, the features comes back again.
I can fill in the connection strings without problem.
The providers feature however, gives me the following errors:
There is a duplicate .... sections defined.
When googling on this error, it seems that on .net 4.0 these sections are already globbally defined in the machine.config, So i removed these entries in the machine.config
These are the lines that are "double"
<section name="scriptResourceHandler" type="System.Web.Configuration.ScriptingScriptResourceHandlerSection, System.Web.Extensions, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" requirePermission="false"
allowDefinition="MachineToApplication"/>
<section name="jsonSerialization" type="System.Web.Configuration.ScriptingJsonSerializationSection, System.Web.Extensions, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" requirePermission="false" allowDefinition="Everywhere"
/>
<section name="profileService" type="System.Web.Configuration.ScriptingProfileServiceSection, System.Web.Extensions, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" requirePermission="false" allowDefinition="MachineToApplication"
/>
<section name="authenticationService" type="System.Web.Configuration.ScriptingAuthenticationServiceSection, System.Web.Extensions, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" requirePermission="false"
allowDefinition="MachineToApplication" />
So after removing these lines, i can get into Providers feature in IIS.
but, when i click on "Add..." i get the following error:
Add Provider
There was an error while performing this operation.
Details:
This method cannot be called during the application's pre-start initialization phase.
OK
I spent to much time already to solve this issue and i hope that someone can give me some advice to address this issue.The STS web.config:<?xml version="1.0" encoding="utf-8"?>
<configuration>
<system.serviceModel>
<!-- Behavior List: -->
<behaviors>
<serviceBehaviors>
<behavior name="SecurityTokenServiceBehavior">
<!-- The serviceMetadata behavior allows one to enable metadata (endpoints, bindings, services) publishing.
This configuration enables publishing of such data over HTTP GET.
This does not include metadata about the STS itself such as Claim Types, Keys and other elements to establish a trust.
-->
<serviceMetadata httpGetEnabled="true" />
<!-- Default WCF throttling limits are too low -->
<serviceThrottling maxConcurrentCalls="65536" maxConcurrentSessions="65536" maxConcurrentInstances="65536" />
</behavior>
</serviceBehaviors>
</behaviors>
<!-- Service List: -->
<services>
<service name="Microsoft.IdentityModel.Protocols.WSTrust.WSTrustServiceContract" behaviorConfiguration="SecurityTokenServiceBehavior">
<!-- This is the HTTP endpoint that supports clients requesing tokens. This endpoint uses the default
standard ws2007HttpBinding which requires that clients authenticate using their Windows credentials. -->
<endpoint address="" binding="customBinding" bindingConfiguration="spStsBinding" contract="Microsoft.IdentityModel.Protocols.WSTrust.IWSTrust13SyncContract" />
<!-- This is the HTTP endpoint that supports clients requesting service tokens. -->
<endpoint name="ActAs" address="actas" binding="customBinding" bindingConfiguration="spStsActAsBinding" contract="Microsoft.IdentityModel.Protocols.WSTrust.IWSTrust13SyncContract" />
<!-- This is the HTTP endpoint that supports IMetadataExchange. -->
<endpoint address="mex" binding="mexHttpBinding" contract="IMetadataExchange" />
</service>
<service name="Microsoft.SharePoint.Administration.Claims.SPWindowsTokenCacheService">
<endpoint address="" binding="customBinding" bindingConfiguration="SPWindowsTokenCacheServiceHttpsBinding" contract="Microsoft.SharePoint.Administration.Claims.ISPWindowsTokenCacheServiceContract" />
</service>
</services>
<!-- Binding List: -->
<bindings>
<customBinding>
<binding name="spStsBinding">
<binaryMessageEncoding>
<readerQuotas maxStringContentLength="1048576" maxArrayLength="2097152" />
</binaryMessageEncoding>
<httpTransport maxReceivedMessageSize="2162688" authenticationScheme="Negotiate" useDefaultWebProxy="false" />
</binding>
<binding name="spStsActAsBinding">
<security authenticationMode="SspiNegotiatedOverTransport" allowInsecureTransport="true" defaultAlgorithmSuite="Basic256Sha256" messageSecurityVersion="WSSecurity11WSTrust13WSSecureConversation13WSSecurityPolicy12" />
<binaryMessageEncoding>
<readerQuotas maxStringContentLength="1048576" maxArrayLength="2097152" />
</binaryMessageEncoding>
<httpTransport maxReceivedMessageSize="2162688" authenticationScheme="Negotiate" useDefaultWebProxy="false" />
</binding>
<binding name="SPWindowsTokenCacheServiceHttpsBinding">
<security authenticationMode="IssuedTokenOverTransport" />
<textMessageEncoding>
<readerQuotas maxStringContentLength="1048576" maxArrayLength="2097152" />
</textMessageEncoding>
<httpsTransport maxReceivedMessageSize="2162688" authenticationScheme="Anonymous" useDefaultWebProxy="false" />
</binding>
</customBinding>
</bindings>
</system.serviceModel>
<system.webServer>
<security>
<authentication>
<anonymousAuthentication enabled="true" />
<windowsAuthentication enabled="true">
<providers>
<clear />
<add value="Negotiate" />
<add value="NTLM" />
</providers>
</windowsAuthentication>
</authentication>
</security>
<modules>
<add name="WindowsAuthenticationModule" />
</modules>
</system.webServer>
<system.net>
<connectionManagement>
<add address="*" maxconnection="10000" />
</connectionManagement>
</system.net>
<connectionStrings>
<add connectionString="Server=sqldb_qa_sharepoint2010;Database=SG_SHP_Claims_Authentication;Integrated Security=true" name="SHP_Claims_Authentication" />
</connectionStrings>
</configuration>
I have backupped the machine.config and restored it (the file i edited was in the following dir: C:\Windows\Microsoft.NET\Framework\v4.0.30319\Machine.config) -
Install SharePoint 2013 on Windows 2012 R2
What are the right steps to slipsteam SP 2013 with SP1, from what I understand this will fix the issues with Windows 2012 R2
You currently cannot install SharePoint 2013 on 2012 R2. You will need to wait for an updated ISO release from Microsoft for SharePoint 2013 with Service Pack 1, which will have an updated pre-req installer binary.
The SP1 currently out does not update that binary.
Trevor Seward
Follow or contact me at...
  
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs. -
Install sharepoint 2013 on Windows server 2012, Microsoft Identity Extensions issue !!!!!!!!!
Sharepoint 2013 comes with prerequisitesinstaller.exe to install the software required for the actual Sharepoint installation.
I 've installed Windows server 2012 in the R2 edition as well as Standard edition, but installing the prerequisites ends with an issue for the Microsoft Identity Extensions (MIE) on both versions (screenshot).
The 2012 R2 server has been updated with all latest files by executing Windows update.
In case of the Server 2012 R2, MIE is already installed , but somehow the Sharepoint installation is missing something.
I al;so tried removing default install to let prerequisiteinstaller.exe to install it's own version, but that did not help.
When I skip the prerequisites remaining items, the Sharepoint installation stops directly , requesting the missing items.
I've tried several Sharepoint server installation files, including the 180 days free version.
Screenshots will be uploaded after my account has been checked......Hi Jay,
Installing SharePoint Server 2013 on a computer that is running Windows Server 2012 R2 could lead to unexpected behavior, therefore, Microsoft does not support SharePoint Server 2013 in Windows Server 2012 R2.
SharePoint Server 2013 with Service Pack 1 and SharePoint Foundation 2013 with Service Pack 1 will offer support for Windows Server 2012 R2.
Refer to:
SharePoint 2013 Support for Windows Server 2012 R2
In addition, as Dave suggested, for the sharepoint server issue, please post in the dedicated forum for a better response.
Best Regards,
Anna Wang
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected] -
X64 Oracle 11g R2 Install On i7 3770 Windows 7 x64 Enterprise System Fails
x64 Oracle 11gR2 installation on my new Windows 7 x64 Enterprise system fails after the "Desktop/Server Class" screen. I click Next, and then nothing happens. The install app closes and no installation logs are available. I checked the Windows logs and there is nothing obvious.
My new system has an Intel i7 3770 cpu with 32GB of ram. My old system had twin Intel Xeon EM64T cpus with 3GB of ram. Both systems ran Windows 7 x64 Enterprise. x64 Oracle 11gR2 installed and ran fine on the old system, but the old system started making "funny" noises and had to be replaced.
This is my personal system, not a commercial installation. I got Win 7 x64 Enterprise from my community college, which is a Microsoft Partner. I need Oracle for my relational database classes.
The story so far:
1. I downloaded win64_11gR2_database_1of2 and win64_11gR2_database_2of2 and unpacked both of them into a folder named win64_11gR2_database_install, replacing as necessary.
2. I set up a loopback adapter and added the following entry to c:\Windows\System32\drivers\etc\hosts:
10.10.10.10 localhost PaulK-PC # Loopback Adapter for Oracle 11gR2 Install
3. After creating the loopback adapter, I restarted my PC. I can ping the adapter with no problems.
4. I ran c:\Users\PaulK\Downloads\Oracle\win64_11gR2_database_install\database\setup.exe as Administrator.
5. I skipped email notification, since I don't have a support agreement.
6. I select "Create and configure a database".
7. Whether I select Desktop Class or Server Class, when I click Next, the installation app dies.
Page 2-2 of Oracle Database Installation Guide 11g Release 2 (11.2) for Windows E24186-01 states that an x64 installation of Oracle requires an AMD64 or EM64T cpu. Does this mean I need to install the x86 version of Oracle 11gR2, or is there some other problem?
Suggestions?
Thanks.And Part II:
Apr 24, 2013 5:51:54 PM oracle.sysman.emcp.ParamsManager getHost
CONFIG: Host having instnces running for database orcl : localhost
Apr 24, 2013 5:51:54 PM oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: REP_DB_RUNNING_HOST value: localhost
Apr 24, 2013 5:51:54 PM oracle.sysman.emcp.ParamsManager getRepDbPort
CONFIG: Listener Port: 1521
Apr 24, 2013 5:51:54 PM oracle.sysman.emcp.util.GeneralUtil isLocalConnectionRequired
CONFIG: isLocalConnectionRequired: true
Apr 24, 2013 5:51:54 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: isLocalConnectionRequired: true. Connecting to database instance locally.
Apr 24, 2013 5:51:54 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngineLoacly
CONFIG: SQLEngine connecting with SID: orcl, oracleHome: E:\app\PaulK\product\11.2.0\dbhome_1, and user: SYS
Apr 24, 2013 5:51:54 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngineLoacly
CONFIG: SQLEngine created successfully and connected
Apr 24, 2013 5:51:54 PM oracle.sysman.emcp.DatabaseChecks updateAccountStatus
CONFIG: SYSMAN password modified
Apr 24, 2013 5:51:54 PM oracle.sysman.emcp.DatabaseChecks updateAccountStatus
CONFIG: Unlocked SYSMAN account
Apr 24, 2013 5:51:54 PM oracle.sysman.emcp.ParamsManager getHost
CONFIG: Host having instnces running for database orcl : localhost
Apr 24, 2013 5:51:54 PM oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: REP_DB_RUNNING_HOST value: localhost
Apr 24, 2013 5:51:54 PM oracle.sysman.emcp.ParamsManager getRepDbPort
CONFIG: Listener Port: 1521
Apr 24, 2013 5:51:54 PM oracle.sysman.emcp.util.GeneralUtil isLocalConnectionRequired
CONFIG: isLocalConnectionRequired: true
Apr 24, 2013 5:51:54 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: isLocalConnectionRequired: true. Connecting to database instance locally.
Apr 24, 2013 5:51:54 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngineLoacly
CONFIG: SQLEngine connecting with SID: orcl, oracleHome: E:\app\PaulK\product\11.2.0\dbhome_1, and user: SYSMAN
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngineLoacly
CONFIG: SQLEngine created successfully and connected
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter ORACLE_HOSTNAME.
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter ORACLE_HOSTNAME.
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter ORACLE_HOSTNAME.
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.ParamsManager getHost
CONFIG: Host having instnces running for database orcl : localhost
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: REP_DB_RUNNING_HOST value: localhost
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.ParamsManager getRepDbPort
CONFIG: Listener Port: 1521
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.util.GeneralUtil isLocalConnectionRequired
CONFIG: isLocalConnectionRequired: true
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: isLocalConnectionRequired: true. Connecting to database instance locally.
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngineLoacly
CONFIG: SQLEngine connecting with SID: orcl, oracleHome: E:\app\PaulK\product\11.2.0\dbhome_1, and user: SYS
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngineLoacly
CONFIG: SQLEngine created successfully and connected
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.EMDBPreConfig invoke
CONFIG: Passed repository configuration check
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter MODIFY_SID.
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter MODIFY_SID.
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter GLOBAL_DB_UNIQUE_NAME.
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.DatabaseChecks getGlobalDbUniqueName
CONFIG: No Global database unique name available. Will try to retrieve it from DB itself
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.ParamsManager getHost
CONFIG: Host having instnces running for database orcl : localhost
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: REP_DB_RUNNING_HOST value: localhost
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.ParamsManager getRepDbPort
CONFIG: Listener Port: 1521
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.util.GeneralUtil isLocalConnectionRequired
CONFIG: isLocalConnectionRequired: true
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: isLocalConnectionRequired: true. Connecting to database instance locally.
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngineLoacly
CONFIG: SQLEngine connecting with SID: orcl, oracleHome: E:\app\PaulK\product\11.2.0\dbhome_1, and user: SYS
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngineLoacly
CONFIG: SQLEngine created successfully and connected
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter DB_DOMAIN.
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.DatabaseChecks getDbDomain
CONFIG: No db domain available. Will query db for db_domain parameter
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: GLOBAL_DB_UNIQUE_NAME value: orcl
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.util.FileUtil _copyFile
CONFIG: Copying file E:\app\PaulK\product\11.2.0\dbhome_1\sysman\config\emd.properties to E:\app\PaulK\product\11.2.0\dbhome_1\sysman\config\emd.properties.emca.tmp
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.util.FileUtil backupFile
CONFIG: The original file E:\app\PaulK\product\11.2.0\dbhome_1\sysman\config\emd.properties has been copied to E:\app\PaulK\product\11.2.0\dbhome_1\sysman\config\emd.properties.emca.tmp
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.util.FileUtil _copyFile
CONFIG: Copying file E:\app\PaulK\product\11.2.0\dbhome_1\sysman\config\emoms.properties to E:\app\PaulK\product\11.2.0\dbhome_1\sysman\config\emoms.properties.emca.tmp
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.util.FileUtil backupFile
CONFIG: The original file E:\app\PaulK\product\11.2.0\dbhome_1\sysman\config\emoms.properties has been copied to E:\app\PaulK\product\11.2.0\dbhome_1\sysman\config\emoms.properties.emca.tmp
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.util.FileUtil _copyFile
CONFIG: Copying file E:\app\PaulK\product\11.2.0\dbhome_1\sysman\emd\targets.xml to E:\app\PaulK\product\11.2.0\dbhome_1\sysman\emd\targets.xml.emca.tmp
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.util.FileUtil backupFile
CONFIG: The original file E:\app\PaulK\product\11.2.0\dbhome_1\sysman\emd\targets.xml has been copied to E:\app\PaulK\product\11.2.0\dbhome_1\sysman\emd\targets.xml.emca.tmp
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.util.ClusterUtil isHASInstalled
CONFIG: isHAInstalled: false
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter ORACLE_HOSTNAME.
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.util.ClusterUtil isCRSInstalled
CONFIG: isCRSInstalled: false
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.util.ClusterUtil getLocalNode
CONFIG: Cluster.isCluster: false. Skip call to getLocalNode
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.util.ClusterUtil getLocalNode
CONFIG: isLocalNodeDone: true localNode: null
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.ParamsManager setFlag
CONFIG: Flag 'IS_CENTRAL_AGENT_RECONFIG' set to false
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter ORACLE_HOSTNAME.
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.util.ClusterUtil getLocalNode
CONFIG: isLocalNodeDone: true localNode: null
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.util.CentralAgentUtil isCentralAgentConfigured
CONFIG: Sid: orcl Host: localhost Node: null OH: E:\app\PaulK\product\11.2.0\dbhome_1 agentHome: null isCentral: false
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.util.DBControlUtil isDBConsoleConfigured
CONFIG: Sid: orcl Host: localhost Node: null OH: E:\app\PaulK\product\11.2.0\dbhome_1 isDBC: false
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.ParamsManager setFlag
CONFIG: Flag 'IS_CENTRAL_AGENT_CONFIGURED' set to false
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.ParamsManager setFlag
CONFIG: Flag 'IS_DBCONTROL_CONFIGURED' set to false
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter DBCONTROL_HTTP_PORT.
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter AGENT_PORT.
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter RMI_PORT.
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter JMS_PORT.
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter ORACLE_HOSTNAME.
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.util.ClusterUtil getLocalNode
CONFIG: isLocalNodeDone: true localNode: null
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.util.DBControlUtil isDBConsoleConfigured
CONFIG: Sid: orcl Host: localhost Node: null OH: E:\app\PaulK\product\11.2.0\dbhome_1 isDBC: false
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter ORACLE_HOSTNAME.
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter PORTS_FILE.
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.util.ClusterUtil getLocalNode
CONFIG: isLocalNodeDone: true localNode: null
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter JMS_PORT_localhost.
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter JMS_PORT.
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter RMI_PORT_localhost.
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter RMI_PORT.
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter DBCONTROL_HTTP_PORT_localhost.
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter DBCONTROL_HTTP_PORT.
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter AGENT_PORT_localhost.
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter AGENT_PORT.
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.util.OUIInventoryUtil setOUILoc
CONFIG: Setting oracle.installer.oui_loc to E:\app\PaulK\product\11.2.0\dbhome_1\oui
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.util.PortManager markAllUsedPorts
CONFIG: Homes to scan for used ports: [E:\app\PaulK\product\11.2.0\dbhome_1]
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.util.PortManager markAllUsedPorts
CONFIG: Searching all DBConsole instances for used ports under ORACLE_HOME E:\app\PaulK\product\11.2.0\dbhome_1
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.util.PortManager markAllUsedPorts
CONFIG: Marking JMS port: null from E:\app\PaulK\product\11.2.0\dbhome_1\oc4j\j2ee\OC4J_DBConsole
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.util.PortManager markAllUsedPorts
CONFIG: Marking RMI port: null from E:\app\PaulK\product\11.2.0\dbhome_1\oc4j\j2ee\OC4J_DBConsole
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.util.PortManager markAllUsedPorts
CONFIG: Marking HTTP port: null from E:\app\PaulK\product\11.2.0\dbhome_1\oc4j\j2ee\OC4J_DBConsole
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.util.PortManager getAgentPort
CONFIG: Cannot parse EMD_URL correctly. No port identified
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.util.PortManager markAllUsedPorts
CONFIG: Marking Agent port: null from E:\app\PaulK\product\11.2.0\dbhome_1\sysman\config\emd.properties
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.util.PortManager markAllUsedPorts
CONFIG: Cannnot parse EMD_URL correctly. No port identified
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.util.FileUtil getProperties
CONFIG: Error reading file E:\app\PaulK\product\11.2.0\dbhome_1\install\staticports.ini
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.util.PortManager getFreePorts
CONFIG: E:\app\PaulK\product\11.2.0\dbhome_1:localhost:null:orcl:{}:null:{DBCONTROL_HTTP_PORT=1158, RMI_PORT=5520, JMS_PORT=5540, AGENT_PORT=3938}
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter AGENT_PORT_localhost.
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: AGENT_PORT_localhost value: 3938
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter DBCONTROL_HTTP_PORT_localhost.
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: DBCONTROL_HTTP_PORT_localhost value: 1158
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter JMS_PORT_localhost.
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: JMS_PORT_localhost value: 5540
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter RMI_PORT_localhost.
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: RMI_PORT_localhost value: 5520
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.EMDBPreConfig getFreePorts
CONFIG: Ports assigned for Node: localhost : {DBCONTROL_HTTP_PORT=1158, RMI_PORT=5520, JMS_PORT=5540, AGENT_PORT=3938}
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter ORACLE_HOSTNAME.
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.util.ClusterUtil getLocalNode
CONFIG: isLocalNodeDone: true localNode: null
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.EMDBPreConfig copyAgentTimeStampFile
CONFIG: File: E:\app\PaulK\product\11.2.0\dbhome_1\localhost_orcl\sysman\emd\agntstmp.txt:localhost does not exists.
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.ParamsManager getHost
CONFIG: Host having instnces running for database orcl : localhost
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: REP_DB_RUNNING_HOST value: localhost
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.ParamsManager getRepDbPort
CONFIG: Listener Port: 1521
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.util.GeneralUtil isLocalConnectionRequired
CONFIG: isLocalConnectionRequired: true
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: isLocalConnectionRequired: true. Connecting to database instance locally.
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngineLoacly
CONFIG: SQLEngine connecting with SID: orcl, oracleHome: E:\app\PaulK\product\11.2.0\dbhome_1, and user: SYS
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngineLoacly
CONFIG: SQLEngine created successfully and connected
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.EMReposConfig unlockAccounts
CONFIG: Unlocking dbsnmp and sysman
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.EMReposConfig invoke
CONFIG: Successfully unlocked relevant accounts
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.ParamsManager getHost
CONFIG: Host having instnces running for database orcl : localhost
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: REP_DB_RUNNING_HOST value: localhost
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.ParamsManager getRepDbPort
CONFIG: Listener Port: 1521
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.util.GeneralUtil isLocalConnectionRequired
CONFIG: isLocalConnectionRequired: true
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: isLocalConnectionRequired: true. Connecting to database instance locally.
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngineLoacly
CONFIG: SQLEngine connecting with SID: orcl, oracleHome: E:\app\PaulK\product\11.2.0\dbhome_1, and user: SYS
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngineLoacly
CONFIG: SQLEngine created successfully and connected
Apr 24, 2013 5:51:59 PM oracle.sysman.emcp.EMReposConfig createOutOfBoxJobs
CONFIG: Finished executing emreposoutofbox.sql
Apr 24, 2013 5:51:59 PM oracle.sysman.emcp.ParamsManager getHost
CONFIG: Host having instnces running for database orcl : localhost
Apr 24, 2013 5:51:59 PM oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: REP_DB_RUNNING_HOST value: localhost
Apr 24, 2013 5:51:59 PM oracle.sysman.emcp.ParamsManager getRepDbPort
CONFIG: Listener Port: 1521
Apr 24, 2013 5:51:59 PM oracle.sysman.emcp.util.GeneralUtil isLocalConnectionRequired
CONFIG: isLocalConnectionRequired: true
Apr 24, 2013 5:51:59 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: isLocalConnectionRequired: true. Connecting to database instance locally.
Apr 24, 2013 5:51:59 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngineLoacly
CONFIG: SQLEngine connecting with SID: orcl, oracleHome: E:\app\PaulK\product\11.2.0\dbhome_1, and user: SYSMAN
Apr 24, 2013 5:51:59 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngineLoacly
CONFIG: SQLEngine created successfully and connected
Apr 24, 2013 5:51:59 PM oracle.sysman.emcp.EMReposConfig createOutOfBoxJobs
CONFIG: Submitting dbms job: E:\app\PaulK\product\11.2.0\dbhome_1\sysman\admin\emdrep\sql\core\latest\admin\admin_submit_dbms_jobs.sql
Apr 24, 2013 5:51:59 PM oracle.sysman.emcp.EMReposConfig createOutOfBoxJobs
CONFIG: Successfully submitted dbms job
Apr 24, 2013 5:51:59 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter ORACLE_HOSTNAME.
Apr 24, 2013 5:52:00 PM oracle.sysman.emcp.ParamsManager checkListenerStatusForDBControl
CONFIG: connectDesc : (DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=localhost)(PORT=1521)))(CONNECT_DATA=(SERVICE_NAME=orcl)))
Apr 24, 2013 5:52:00 PM oracle.sysman.emcp.ParamsManager getHost
CONFIG: Host having instnces running for database orcl : localhost
Apr 24, 2013 5:52:00 PM oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: REP_DB_RUNNING_HOST value: localhost
Apr 24, 2013 5:52:00 PM oracle.sysman.emcp.ParamsManager getRepDbPort
CONFIG: Listener Port: 1521
Apr 24, 2013 5:52:00 PM oracle.sysman.emcp.util.GeneralUtil isLocalConnectionRequired
CONFIG: isLocalConnectionRequired: true
Apr 24, 2013 5:52:00 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: isLocalConnectionRequired: true. Connecting to database instance locally.
Apr 24, 2013 5:52:00 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngineLoacly
CONFIG: SQLEngine connecting with SID: orcl, oracleHome: E:\app\PaulK\product\11.2.0\dbhome_1, and user: SYSMAN
Apr 24, 2013 5:52:00 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngineLoacly
CONFIG: SQLEngine created successfully and connected
Apr 24, 2013 5:52:00 PM oracle.sysman.emcp.ParamsManager checkListenerStatusForDBControl
CONFIG: ORA-12514: TNS:listener does not currently know of service requested in connect descriptor
oracle.sysman.assistants.util.sqlEngine.SQLFatalErrorException: ORA-12514: TNS:listener does not currently know of service requested in connect descriptor
at oracle.sysman.assistants.util.sqlEngine.SQLEngine.executeImpl(SQLEngine.java:1655)
at oracle.sysman.assistants.util.sqlEngine.SQLEngine.executeSql(SQLEngine.java:1903)
at oracle.sysman.emcp.ParamsManager.checkListenerStatusForDBControl(ParamsManager.java:3230)
at oracle.sysman.emcp.EMReposConfig.unlockMGMTAccount(EMReposConfig.java:1001)
at oracle.sysman.emcp.EMReposConfig.invoke(EMReposConfig.java:346)
at oracle.sysman.emcp.EMReposConfig.invoke(EMReposConfig.java:158)
at oracle.sysman.emcp.EMConfig.perform(EMConfig.java:253)
at oracle.sysman.assistants.util.em.EMConfiguration.run(EMConfiguration.java:583)
at oracle.sysman.assistants.dbca.backend.PostDBCreationStep.executeImpl(PostDBCreationStep.java:968)
at oracle.sysman.assistants.util.step.BasicStep.execute(BasicStep.java:210)
at oracle.sysman.assistants.util.step.Step.execute(Step.java:140)
at oracle.sysman.assistants.util.step.StepContext$ModeRunner.run(StepContext.java:2667)
at java.lang.Thread.run(Thread.java:595)
Apr 24, 2013 5:52:00 PM oracle.sysman.emcp.EMConfig perform
SEVERE: Listener is not up or database service is not registered with it. Start the Listener and register database service and run EM Configuration Assistant again .
Refer to the log file at E:\app\PaulK\cfgtoollogs\dbca\orcl\emConfig.log for more details.
Apr 24, 2013 5:52:00 PM oracle.sysman.emcp.EMConfig perform
CONFIG: Stack Trace:
oracle.sysman.emcp.exception.EMConfigException: Listener is not up or database service is not registered with it. Start the Listener and register database service and run EM Configuration Assistant again .
at oracle.sysman.emcp.ParamsManager.checkListenerStatusForDBControl(ParamsManager.java:3245)
at oracle.sysman.emcp.EMReposConfig.unlockMGMTAccount(EMReposConfig.java:1001)
at oracle.sysman.emcp.EMReposConfig.invoke(EMReposConfig.java:346)
at oracle.sysman.emcp.EMReposConfig.invoke(EMReposConfig.java:158)
at oracle.sysman.emcp.EMConfig.perform(EMConfig.java:253)
at oracle.sysman.assistants.util.em.EMConfiguration.run(EMConfiguration.java:583)
at oracle.sysman.assistants.dbca.backend.PostDBCreationStep.executeImpl(PostDBCreationStep.java:968)
at oracle.sysman.assistants.util.step.BasicStep.execute(BasicStep.java:210)
at oracle.sysman.assistants.util.step.Step.execute(Step.java:140)
at oracle.sysman.assistants.util.step.StepContext$ModeRunner.run(StepContext.java:2667)
at java.lang.Thread.run(Thread.java:595)
Apr 24, 2013 5:52:00 PM oracle.sysman.emcp.EMConfig restoreOuiLoc
CONFIG: Restoring oracle.installer.oui_loc to E:\app\PaulK\product\11.2.0\dbhome_1\oui -
Installing SQL Server on Windows 8.1 Enterprise
I have tried to install SQL Sever 2012 Developer Edition five times on Windows 8.1 Enterprise.
I get this error:
Could not find the Database Engine startup handle
What could be causing this problem?
(Update: I just seen I have been trying to install SQL Server 2012 32-bit and not 64-bit. Could this be the problem?)I have tried to install SQL Sever 2012 Developer Edition five times on Windows 8.1 Enterprise.
I get this error:
Could not find the Database Engine startup handle
What could be causing this problem?
(Update: I just seen I have been trying to install SQL Server 2012 32-bit and not 64-bit. Could this be the problem?)
Hello,
This error generally points out to fact that account which you are using is not able to start database engine after installation or in between.There can be quite few reasons for that.I would like you to paste log file for failed installation using below
link
http://technet.microsoft.com/en-us/library/ms143702.aspx
Please make sure all previous failed installations are removed completely.
If possible create a new ID add it into local windows administrator and then try installation with that ID.Or you can login in windows with that ID .Go to setup files RK on Set.up.exe and select run as administrator
Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers -
No ability to create PDF Files using Acrobat 6.01_6.06 after installing Word 2010. (Windows XP)
Since installing Word 2010 (upgrading from Word 2003) there are no visable PDF Icons nor ability to create PDF Files using Adobe Acrobat 6.06. Operating system is Windows XP. Browser is IE8. Various attempts to bypass this situation have not been successful. No problems had been experienced earlier using Acrobat 6.01 through 6.06 with Word 2003 and earlier Word versions during the passed 10 years or so. Adobe's support is not responding to recognize mentioned situations, nor is there any a solution to fix the problem. Low volume small businesses,with limited need to create PDF files, are being considerably burdened to substante a $200 investment to upgrade to Acrobat X, which may as well not be the solution. It is appealed for Adobe Forums readers to share similar experiences with possible fixes at hand. Responses will be greatly appreciated. Thank you...
Your response is greatly appreciated, Bernd...
Unfortunately, those of us who milk software packages for eons such as
Acrobat 6.06 Standard, a full version of Acrobat X is quoted to be $299
with no ability to upgrade since 7.0 is the cutoff which remains to be
only $139.
It seems to me, Military personal, retired or just ole toots who did
their think, would offer considerations such as Staples, Lowe's, and
other big boxes offer. Such is greed for some who do not consider
alternatives above their noses...
Thank you,
Skip -
Install sharepoint 2010 libraries in visual studio 2010
hi all,
I want to develop sharepoint in visual studio without installing SharePoint!!
so I can write my code in my laptop which it have not enough memory (for installing SharePoint) with no error and deploy it in the server later.
because I carry my laptop every where.
is that can be done??Yes, you can with the DLLs. Refer to the following post for more information
http://stackoverflow.com/questions/12950548/sharepoint-2010-development-without-local-server-installation
http://geekswithblogs.net/KunaalKapoor/archive/2012/04/26/develop-sharepoint-solutions-without-installing-sharepoint-on-visual-studio.aspx
Cheers, -
Hi Guys
when we install an Application in windows 8 family, we see that in addition of Application executable file, user manuals (.chm) and PDF & other files related to that App are added to start menu (when we click down Arrow which shows all programs) and
so the start menu gets quit messy.
is there any settings to make only applications executable file be added to start menu & prevent other types of files related to that App being added here?
thanks in advancedHi John,
This issue is related to the programs package we installed.
• An installation package contains all of the information that the Windows Installer requires to install or uninstall an application or product and to run the setup user interface.
• The developer can specify installation context, and based on these properties, Windows Installer automatically redirects the values of folder properties and registrations to locations.
• The shortcut is added to the profile by these context
We could right click these file and could find out they are the shortcut mentioned above.
For more information about Windows Installer, please refer to the following article.
http://msdn.microsoft.com/en-us/library/windows/desktop/dd765197(v=vs.85).aspx
Best regards,
Fangzhou CHEN
Fangzhou CHEN
TechNet Community Support
hi Fangzhou
useful link
thanks a lot -
Install Oracle 10g on Windows Server 2003 Enterprise Edition
I have a machine with the following specs:
Windows Server 2003 Enterprise Edition
16GB Memory
1.2TB Storage
I heard that Oracle has a limitation of 2GB Memory Allocation for Oracle Database. Can you post steps on how to acoomplish this task?mrp wrote:
I have a machine with the following specs:
Windows Server 2003 Enterprise Edition
16GB Memory
1.2TB Storage
I heard that Oracle has a limitation of 2GB Memory Allocation for Oracle Database. Can you post steps on how to acoomplish this task?Pray tell, where did you hear that? I'd encourage you find the source and ask for your money back - they give bad advice.
More relevant info can be found at http://www.oracle.com/pls/db102/portal.portal_db?selected=3 ... scroll down to 'Platform Guide' and select the appropriate guide - Windows 32 bit, Windows Itanium, or Windows 64 bit - that is relevant to your environment. For 32 bit, look at Chapter 1 and the sections
Oracle Database Scalability on Windows
* Support for Very Large Memory (VLM) Configurations
* Windows 4 GB RAM Tuning (4GT) -
Cannot install Office 2010 on Windows Server 2008 terminal server
Hello
I have a Windows 2008 terminal server which has Office 2007 Professional Plus on it. We want to upgrade it to Office 2010 Professional Plus.
Following steps from Technet, I made sure all users were out of the terminal server, then selected "Install Application on Terminal Server", then ran the setup.exe file for Office 2010.
The splash screen comes up for Office 2010 but then disappears and the install does not progress, although the setup.exe is still running in Task Manager. The "install Application on Terminal Server" window is still open, waiting for me to click
Next, Finish or Cancel and nothing else happens.
I also tried putting the server into install mode from command prompt and rebooting the server and re-attempting but no good.
How can I go about troubleshooting this issue?
Many thanks
Luke DunsterHi Luke,
Are you using a volume license version of Office 2010 for Remote Desktop Services/Terminal
Services? I may be wrong but I think that only this version of Office 2010 will work on a Terminal
Server. The Retail Version will just not work in this case.
I had similar problem where I tried to upgrade from Office 2007 to Office 2010 on a Terminal Server (Windows
2008) but wasn't successful with the upgrade/installation.
Also take a look at this post:
http://social.technet.microsoft.com/Forums/windowsserver/en-US/e09ee781-82c2-4399-85f4-1b90ae690ccb/office-2010-licensing-for-windows-2008-rdsterminal-services-pkc-ok?forum=winserverTS
Jale01 -
Manual Running of PSCONFIG after Installing SharePoint 2010 Patches FAILS
On SBS2011, having run:
1. Open an Administrative command prompt.
2. Change directory to C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\14\BIN
3. Run PSConfig.exe -cmd upgrade -inplace b2b -force -cmd applicationcontent -install -cmd installfeatures
We get the same errors as numerous others on stage 5 of 6:
An exception of type Microsoft.SharePoint.Upgrade.SPUpgradeException was thrown.
Additional exception information: Action 4.0.13.0 of Microsoft.SharePoint.Upgrade.SPServerSequence failed.
And the following from the bottom of the ~1MB log file:
07/27/2014 14:45:07 1 INF Entering function TaskDriver.Stop
07/27/2014 14:45:07 1 INF Entering function StringResourceManager.GetResourceString
07/27/2014 14:45:07 1 INF Resource id to be retrieved is PostSetupConfigurationFailedEventLog for language English (United States)
07/27/2014 14:45:07 1 INF Resource retrieved id PostSetupConfigurationFailedEventLog is Configuration of SharePoint Products failed. Configuration must be performed in order
for this product to operate properly. To diagnose the problem, review the extended error information located at {0}, fix the problem, and run this configuration wizard again.
07/27/2014 14:45:07 1 INF Leaving function StringResourceManager.GetResourceString
07/27/2014 14:45:07 1 ERR Configuration of SharePoint Products failed. Configuration must be performed in order for this product to operate properly. To diagnose the problem, review
the extended error information located at C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\14\LOGS\PSCDiagnostics_7_27_2014_14_44_32_814_2083894735.log, fix the problem, and run this configuration wizard again.
07/27/2014 14:45:07 1 INF Entering function StringResourceManager.GetResourceString
07/27/2014 14:45:07 1 INF Resource id to be retrieved is PostSetupConfigurationFailedUserMessage for language English (United States)
07/27/2014 14:45:07 1 INF Resource retrieved id PostSetupConfigurationFailedUserMessage is Configuration of SharePoint Products failed. Configuration must be performed before
you use SharePoint Products. For further details, see the diagnostic log located at {0} and the application event log.
07/27/2014 14:45:07 1 INF Leaving function StringResourceManager.GetResourceString
07/27/2014 14:45:07 1 INF Entering function TaskDriver.OnTaskDriverStop
07/27/2014 14:45:07 1 INF Sending a task driver stop event: TaskDriverEventArgs.EventCriticalityType error, TaskDriverEventArgs.EventType.stop, Configuration of SharePoint Products
failed. Configuration must be performed before you use SharePoint Products. For further details, see the diagnostic log located at C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\14\LOGS\PSCDiagnostics_7_27_2014_14_44_32_814_2083894735.log
and the application event log.
07/27/2014 14:45:07 1 INF Entering function TaskDriverStateChange.Enter
07/27/2014 14:45:07 1 INF Acquiring the writer lock to change the state
07/27/2014 14:45:07 1 INF Current state of the task driver is neverrun. You want to change it to stoppedrunning
07/27/2014 14:45:07 1 INF Changed state of the task driver to neverrun
07/27/2014 14:45:07 1 INF Released the writer lock to change the state
07/27/2014 14:45:07 1 INF Leaving function TaskDriverStateChange.Enter
07/27/2014 14:45:07 1 INF Entering function TaskDriver.FireOnTaskDriverEvent
07/27/2014 14:45:07 1 INF Entering function CommandLine.TaskDriverEventHandler
07/27/2014 14:45:07 1 INF Received a TaskDriverEventHandler: TaskDriverEventArgs.EventCriticalityType error, TaskDriverEventArgs.EventType stop, message Configuration
of SharePoint Products failed. Configuration must be performed before you use SharePoint Products. For further details, see the diagnostic log located at C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\14\LOGS\PSCDiagnostics_7_27_2014_14_44_32_814_2083894735.log
and the application event log.
07/27/2014 14:45:07 1 INF Leaving function CommandLine.TaskDriverEventHandler
07/27/2014 14:45:07 1 INF Leaving function TaskDriver.FireOnTaskDriverEvent
07/27/2014 14:45:07 1 INF Leaving function TaskDriver.OnTaskDriverStop
07/27/2014 14:45:07 1 INF Leaving function TaskDriver.Stop
Have followed the suggestions re clearing cache, starting the timer service, etc., but not joy.
What could be the cause? Thanks!!!
PS It's broken the backup too, but I understand that's "normal"... :o/Hi Jason - thanks for your reply.
I was under the impression that this manual task had to take place post the SP patches/service pack? (there's much talk of it on the net to do this).
I will try your command though!
Thanks! :o)
There's some more info in the log (it is large - less verbose would have been handy!):
07/27/2014 14:45:27 13 INF Entering function TaskCommon.TraceToPsconfigLogAndUpgradeManagerLog
07/27/2014 14:45:27 13 INF Setting the upgrade mode to inplace
07/27/2014 14:45:27 13 INF Leaving function TaskCommon.TraceToPsconfigLogAndUpgradeManagerLog
07/27/2014 14:45:27 13 INF Creating security token service application for this farm ...
07/27/2014 14:45:27 13 INF Successfully created security token service application
07/27/2014 14:45:27 13 INF Creating service connection point for this farm ...
07/27/2014 14:45:27 13 WRN Failed to add the service connection point for this farm
07/27/2014 14:45:27 13 INF Entering function StringResourceManager.GetResourceString
07/27/2014 14:45:27 13 INF Resource id to be retrieved is ServiceConnectionPointNotCreatedEventLog for language English (United States)
07/27/2014 14:45:27 13 INF Resource retrieved id ServiceConnectionPointNotCreatedEventLog is Unable to create a Service Connection Point in the current Active Directory
domain. Verify that the SharePoint container exists in the current domain and that you have rights to write to it.
07/27/2014 14:45:27 13 INF Leaving function StringResourceManager.GetResourceString
07/27/2014 14:45:27 13 WRN Unable to create a Service Connection Point in the current Active Directory domain. Verify that the SharePoint container exists in the current domain and
that you have rights to write to it.
Microsoft.SharePoint.SPException: The object LDAP://CN=Microsoft SharePoint Products,CN=System,DC=hjplondon,DC=local doesn't exist in the directory.
at Microsoft.SharePoint.Administration.SPServiceConnectionPoint.Ensure(String serviceBindingInformation)
at Microsoft.SharePoint.PostSetupConfiguration.UpgradeTask.Run()
07/27/2014 14:45:33 13 ERR Task upgrade has failed with an unknown exception
07/27/2014 14:45:34 13 ERR Exception: Microsoft.SharePoint.Upgrade.SPUpgradeException: Action 4.0.13.0 of Microsoft.SharePoint.Upgrade.SPServerSequence failed. ---> System.ComponentModel.Win32Exception:
HJPLONDON\spwebapp
at Microsoft.SharePoint.Win32.SPAdvApi32.LookupAccountName(String strAccountName, String& strDomainName, SID_NAME_USE& sidUse)
at Microsoft.SharePoint.Win32.SPAdvApi32.LsaAddAccountRights(String strAccountName, String strUserRight)
at Microsoft.SharePoint.Administration.SPProvisioningAssistant.AddLaunchOnBehalfOfPrivileges(String userName)
at Microsoft.SharePoint.Upgrade.EnsureAppPoolsHaveLaunchOnBehalfPriviliges.Upgrade()
at Microsoft.SharePoint.Upgrade.SPActionSequence.Upgrade()
--- End of inner exception stack trace ---
at Microsoft.SharePoint.Upgrade.SPActionSequence.Upgrade()
at Microsoft.SharePoint.Upgrade.SPUpgradeSession.Upgrade(Object o, Boolean bRecurse)
at Microsoft.SharePoint.Administration.SPPersistedUpgradableObject.Upgrade(Boolean recursively)
at Microsoft.SharePoint.Upgrade.SPManager.InplaceUpgradeAdministrationWebApplication()
at Microsoft.SharePoint.PostSetupConfiguration.UpgradeTask.Run()
at Microsoft.SharePoint.PostSetupConfiguration.TaskThread.ExecuteTask()
07/27/2014 14:45:34 13 INF Entering function Common.BuildExceptionMessage
07/27/2014 14:45:34 13 INF Entering function StringResourceManager.GetResourceString
07/27/2014 14:45:34 13 INF Resource id to be retrieved is ExceptionInfo for language English (United States)
07/27/2014 14:45:34 13 INF Resource retrieved id ExceptionInfo is An exception of type {0} was thrown. Additional exception information: {1}
07/27/2014 14:45:34 13 INF Leaving function StringResourceManager.GetResourceString
07/27/2014 14:45:34 13 INF Leaving function Common.BuildExceptionMessage
07/27/2014 14:45:34 13 INF Entering function Common.BuildExceptionInformation
07/27/2014 14:45:34 13 INF Entering function Common.BuildExceptionMessage
07/27/2014 14:45:34 13 INF Entering function StringResourceManager.GetResourceString
07/27/2014 14:45:34 13 INF Resource id to be retrieved is ExceptionInfo for language English (United States)
07/27/2014 14:45:34 13 INF Resource retrieved id ExceptionInfo is An exception of type {0} was thrown. Additional exception information:
{1}
07/27/2014 14:45:34 13 INF Leaving function StringResourceManager.GetResourceString
07/27/2014 14:45:34 13 INF Leaving function Common.BuildExceptionMessage
07/27/2014 14:45:34 13 INF Leaving function Common.BuildExceptionInformation
07/27/2014 14:45:34 13 ERR An exception of type Microsoft.SharePoint.Upgrade.SPUpgradeException was thrown. Additional exception information: Action 4.0.13.0 of Microsoft.SharePoint.Upgrade.SPServerSequence
failed.
Microsoft.SharePoint.Upgrade.SPUpgradeException: Action 4.0.13.0 of Microsoft.SharePoint.Upgrade.SPServerSequence failed. ---> System.ComponentModel.Win32Exception: HJPLONDON\spwebapp
at Microsoft.SharePoint.Win32.SPAdvApi32.LookupAccountName(String strAccountName, String& strDomainName, SID_NAME_USE& sidUse)
at Microsoft.SharePoint.Win32.SPAdvApi32.LsaAddAccountRights(String strAccountName, String strUserRight)
at Microsoft.SharePoint.Administration.SPProvisioningAssistant.AddLaunchOnBehalfOfPrivileges(String userName)
at Microsoft.SharePoint.Upgrade.EnsureAppPoolsHaveLaunchOnBehalfPriviliges.Upgrade()
at Microsoft.SharePoint.Upgrade.SPActionSequence.Upgrade()
--- End of inner exception stack trace ---
at Microsoft.SharePoint.Upgrade.SPActionSequence.Upgrade()
at Microsoft.SharePoint.Upgrade.SPUpgradeSession.Upgrade(Object o, Boolean bRecurse)
at Microsoft.SharePoint.Administration.SPPersistedUpgradableObject.Upgrade(Boolean recursively)
at Microsoft.SharePoint.Upgrade.SPManager.InplaceUpgradeAdministrationWebApplication()
at Microsoft.SharePoint.PostSetupConfiguration.UpgradeTask.Run()
at Microsoft.SharePoint.PostSetupConfiguration.TaskThread.ExecuteTask()
07/27/2014 14:45:34 13 INF Entering function Common.BuildExceptionInformation
07/27/2014 14:45:34 13 INF Entering function Common.BuildExceptionMessage
07/27/2014 14:45:34 13 INF Entering function StringResourceManager.GetResourceString
07/27/2014 14:45:34 13 INF Resource id to be retrieved is ExceptionInfo for language English (United States)
07/27/2014 14:45:34 13 INF Resource retrieved id ExceptionInfo is An exception of type {0} was thrown. Additional exception information:
{1}
07/27/2014 14:45:34 13 INF Leaving function StringResourceManager.GetResourceString
07/27/2014 14:45:34 13 INF Leaving function Common.BuildExceptionMessage
07/27/2014 14:45:34 13 INF Leaving function Common.BuildExceptionInformation
07/27/2014 14:45:34 13 INF Entering function get CommandCollection.this[string key]
07/27/2014 14:45:34 13 INF Entering function CommandCollectionBase.Get
07/27/2014 14:45:34 13 INF Found value in collection for key global
07/27/2014 14:45:34 13 INF Leaving function CommandCollectionBase.Get
07/27/2014 14:45:34 13 INF Found command global in collection
07/27/2014 14:45:34 13 INF Leaving function get CommandCollection.this[string key]
07/27/2014 14:45:34 13 INF Entering function get CommandCollection.this[string key]
07/27/2014 14:45:34 13 INF Entering function CommandCollectionBase.Get
07/27/2014 14:45:34 13 INF Found value in collection for key initialize
07/27/2014 14:45:34 13 INF Leaving function CommandCollectionBase.Get
07/27/2014 14:45:34 13 INF Found command initialize in collection
07/27/2014 14:45:34 13 INF Leaving function get CommandCollection.this[string key]
07/27/2014 14:45:34 13 INF Entering function Command.this[string key]
07/27/2014 14:45:34 13 INF Entering function CommandCollectionBase.Get
07/27/2014 14:45:34 13 INF Found value in collection for key SINGLESERVER
07/27/2014 14:45:34 13 INF Leaving function CommandCollectionBase.Get
07/27/2014 14:45:34 13 INF Found parameter SINGLESERVER in collection
07/27/2014 14:45:34 13 INF Leaving function Command.this[string key]
07/27/2014 14:45:34 13 INF Entering function Command.this[string key]
07/27/2014 14:45:34 13 INF Entering function CommandCollectionBase.Get
07/27/2014 14:45:34 13 INF Found value in collection for key upgradesessionid
07/27/2014 14:45:34 13 INF Leaving function CommandCollectionBase.Get
07/27/2014 14:45:34 13 INF Found parameter upgradesessionid in collection
07/27/2014 14:45:34 13 INF Leaving function Command.this[string key]
07/27/2014 14:45:34 13 INF Releasing the farm upgrade lock in common exception handler.
07/27/2014 14:45:34 13 INF Entering function UpgradeBootstrapTask.BuildUpgradeExtendedMessage
07/27/2014 14:45:34 13 INF Task result is fail
07/27/2014 14:45:34 13 INF Leaving function UpgradeBootstrapTask.BuildUpgradeExtendedMessage
07/27/2014 14:45:34 13 INF Entering function TaskBase.OnTaskStop
07/27/2014 14:45:34 13 INF Creating the OnTaskStop event for task upgrade
07/27/2014 14:45:34 13 ERR Task upgrade has failed
07/27/2014 14:45:34 13 INF friendlyMessage for task upgrade is An exception of type Microsoft.SharePoint.Upgrade.SPUpgradeException was thrown. Additional exception
information: Action 4.0.13.0 of Microsoft.SharePoint.Upgrade.SPServerSequence failed.
07/27/2014 14:45:34 13 INF debugMessage for task upgrade is An exception of type Microsoft.SharePoint.Upgrade.SPUpgradeException was thrown. Additional exception
information: Action 4.0.13.0 of Microsoft.SharePoint.Upgrade.SPServerSequence failed.
Microsoft.SharePoint.Upgrade.SPUpgradeException: Action 4.0.13.0 of Microsoft.SharePoint.Upgrade.SPServerSequence failed. ---> System.ComponentModel.Win32Exception: HJPLONDON\spwebapp
at Microsoft.SharePoint.Win32.SPAdvApi32.LookupAccountName(String strAccountName, String& strDomainName, SID_NAME_USE& sidUse)
at Microsoft.SharePoint.Win32.SPAdvApi32.LsaAddAccountRights(String strAccountName, String strUserRight)
at Microsoft.SharePoint.Administration.SPProvisioningAssistant.AddLaunchOnBehalfOfPrivileges(String userName)
at Microsoft.SharePoint.Upgrade.EnsureAppPoolsHaveLaunchOnBehalfPriviliges.Upgrade()
at Microsoft.SharePoint.Upgrade.SPActionSequence.Upgrade()
--- End of inner exception stack trace ---
at Microsoft.SharePoint.Upgrade.SPActionSequence.Upgrade()
at Microsoft.SharePoint.Upgrade.SPUpgradeSession.Upgrade(Object o, Boolean bRecurse)
at Microsoft.SharePoint.Administration.SPPersistedUpgradableObject.Upgrade(Boolean recursively)
at Microsoft.SharePoint.Upgrade.SPManager.InplaceUpgradeAdministrationWebApplication()
at Microsoft.SharePoint.PostSetupConfiguration.UpgradeTask.Run()
at Microsoft.SharePoint.PostSetupConfiguration.TaskThread.ExecuteTask()
07/27/2014 14:45:34 13 INF Entering function TaskBase.FireTaskStateChanged
07/27/2014 14:45:34 13 INF Firing the OnTaskStateChanged event for task upgrade
07/27/2014 14:45:34 13 INF Entering function TaskDriver.TaskStateEventHandler
07/27/2014 14:45:34 13 INF Entering function StringResourceManager.GetResourceString
07/27/2014 14:45:34 13 INF Resource id to be retrieved is UpgradeTaskDisplayName for language English (United States)
07/27/2014 14:45:34 13 INF Resource retrieved id UpgradeTaskDisplayName is upgrade SharePoint Products
07/27/2014 14:45:34 13 INF Leaving function StringResourceManager.GetResourceString
07/27/2014 14:45:34 13 INF Received an TaskStateEventHandler event. task:upgrade TaskBase.State:stopped
07/27/2014 14:45:34 13 INF Entering function TasksQueue.IncrementTaskFailed
07/27/2014 14:45:34 13 INF Incremented the number of tasks failed to 1
07/27/2014 14:45:34 13 INF Leaving function TasksQueue.IncrementTaskFailed
07/27/2014 14:45:34 13 INF Task upgrade has stopped and failed. Total failed is now 1
07/27/2014 14:45:34 13 INF Leaving function TaskDriver.TaskStateEventHandler
07/27/2014 14:45:34 13 INF Entering function CommandLine.TaskStateEventHandler
07/27/2014 14:45:34 13 INF Received an TaskStateEventHandler event. task:upgrade TaskBase.State:stopped
07/27/2014 14:45:34 13 INF Task upgrade has stopped and failed. Total failed is now 1
07/27/2014 14:45:34 13 INF Entering function get CommandCollection.this[string key]
07/27/2014 14:45:34 13 INF Entering function CommandCollectionBase.Get
07/27/2014 14:45:34 13 INF Found value in collection for key initialize
07/27/2014 14:45:34 13 INF Leaving function CommandCollectionBase.Get
07/27/2014 14:45:34 13 INF Found command initialize in collection
07/27/2014 14:45:34 13 INF Leaving function get CommandCollection.this[string key]
07/27/2014 14:45:34 13 INF Entering function Command.this[string key]
07/27/2014 14:45:34 13 INF Entering function CommandCollectionBase.Get
07/27/2014 14:45:34 13 INF Found value in collection for key wait
07/27/2014 14:45:34 13 INF Leaving function CommandCollectionBase.Get
07/27/2014 14:45:34 13 INF Found parameter wait in collection
07/27/2014 14:45:34 13 INF Leaving function Command.this[string key]
07/27/2014 14:45:34 13 INF Entering function StringResourceManager.GetResourceString
07/27/2014 14:45:34 13 INF Resource id to be retrieved is UpgradeTaskFailConfigSyncDisplayLabel for language English (United States)
07/27/2014 14:45:34 13 INF Resource retrieved id UpgradeTaskFailConfigSyncDisplayLabel is Failed to upgrade SharePoint Products.
07/27/2014 14:45:34 13 INF Leaving function StringResourceManager.GetResourceString
07/27/2014 14:45:34 13 INF Last message from task upgrade is An exception of type Microsoft.SharePoint.Upgrade.SPUpgradeException was thrown.
Additional exception information: Action 4.0.13.0 of Microsoft.SharePoint.Upgrade.SPServerSequence failed.
07/27/2014 14:45:34 13 INF Leaving function CommandLine.TaskStateEventHandler
07/27/2014 14:45:34 13 INF Leaving function TaskBase.FireTaskStateChanged
07/27/2014 14:45:34 13 INF Leaving function TaskBase.OnTaskStop
07/27/2014 14:45:34 13 INF Leaving function TaskThread.ExecuteTask
07/27/2014 14:45:34 1 INF Entering function StringResourceManager.GetResourceString
07/27/2014 14:45:34 1 INF Resource id to be retrieved is UpgradeTaskDisplayName for language English (United States)
07/27/2014 14:45:34 1 INF Resource retrieved id UpgradeTaskDisplayName is upgrade SharePoint Products
07/27/2014 14:45:34 1 INF Leaving function StringResourceManager.GetResourceString
07/27/2014 14:45:34 1 ERR Task upgrade SharePoint Products failed, so stopping execution of the engine
07/27/2014 14:45:34 1 INF Entering function get CommandCollection.this[string key]
07/27/2014 14:45:34 1 INF Entering function CommandCollectionBase.Get
07/27/2014 14:45:34 1 INF Found value in collection for key initialize
07/27/2014 14:45:34 1 INF Leaving function CommandCollectionBase.Get
07/27/2014 14:45:34 1 INF Found command initialize in collection
07/27/2014 14:45:34 1 INF Leaving function get CommandCollection.this[string key]
07/27/2014 14:45:34 1 INF Entering function Command.this[string key]
07/27/2014 14:45:34 1 INF Entering function CommandCollectionBase.Get
07/27/2014 14:45:34 1 INF Found value in collection for key wait
07/27/2014 14:45:34 1 INF Leaving function CommandCollectionBase.Get
07/27/2014 14:45:34 1 INF Found parameter wait in collection
07/27/2014 14:45:34 1 INF Leaving function Command.this[string key]
07/27/2014 14:45:34 1 INF Entering function StringResourceManager.GetResourceString
07/27/2014 14:45:34 1 INF Resource id to be retrieved is UpgradeTaskFailConfigSyncDisplayLabel for language English (United States)
07/27/2014 14:45:34 1 INF Resource retrieved id UpgradeTaskFailConfigSyncDisplayLabel is Failed to upgrade SharePoint Products.
07/27/2014 14:45:34 1 INF Leaving function StringResourceManager.GetResourceString
07/27/2014 14:45:34 1 ERR Failed to upgrade SharePoint Products.
An exception of type Microsoft.SharePoint.Upgrade.SPUpgradeException was thrown. Additional exception information: Action 4.0.13.0 of Microsoft.SharePoint.Upgrade.SPServerSequence failed.
Microsoft.SharePoint.Upgrade.SPUpgradeException: Action 4.0.13.0 of Microsoft.SharePoint.Upgrade.SPServerSequence failed. ---> System.ComponentModel.Win32Exception: HJPLONDON\spwebapp
at Microsoft.SharePoint.Win32.SPAdvApi32.LookupAccountName(String strAccountName, String& strDomainName, SID_NAME_USE& sidUse)
at Microsoft.SharePoint.Win32.SPAdvApi32.LsaAddAccountRights(String strAccountName, String strUserRight)
at Microsoft.SharePoint.Administration.SPProvisioningAssistant.AddLaunchOnBehalfOfPrivileges(String userName)
at Microsoft.SharePoint.Upgrade.EnsureAppPoolsHaveLaunchOnBehalfPriviliges.Upgrade()
at Microsoft.SharePoint.Upgrade.SPActionSequence.Upgrade()
--- End of inner exception stack trace ---
at Microsoft.SharePoint.Upgrade.SPActionSequence.Upgrade()
at Microsoft.SharePoint.Upgrade.SPUpgradeSession.Upgrade(Object o, Boolean bRecurse)
at Microsoft.SharePoint.Administration.SPPersistedUpgradableObject.Upgrade(Boolean recursively)
at Microsoft.SharePoint.Upgrade.SPManager.InplaceUpgradeAdministrationWebApplication()
at Microsoft.SharePoint.PostSetupConfiguration.UpgradeTask.Run()
at Microsoft.SharePoint.PostSetupConfiguration.TaskThread.ExecuteTask()
07/27/2014 14:45:34 1 INF Entering function TaskDriver.NotifyTaskSummary
07/27/2014 14:45:34 1 INF Entering function StringResourceManager.GetResourceString
07/27/2014 14:45:34 1 INF Resource id to be retrieved is TotalTasksRan for language English (United States)
07/27/2014 14:45:34 1 INF Resource retrieved id TotalTasksRan is Total number of configuration settings run: {0}
07/27/2014 14:45:34 1 INF Leaving function StringResourceManager.GetResourceString
07/27/2014 14:45:34 1 INF Entering function TaskDriver.OnTaskDriverNotify
07/27/2014 14:45:34 1 INF Sending a task driver notify event: TaskDriverEventArgs.EventCriticalityType: info, TaskDriverEventArgs.EventMessageType: totalran, TaskDriverEventArgs.EventType.notify,
message: Total number of configuration settings run: 5
07/27/2014 14:45:34 1 INF Entering function TaskDriver.FireOnTaskDriverEvent
07/27/2014 14:45:34 1 INF Entering function CommandLine.TaskDriverEventHandler
07/27/2014 14:45:34 1 INF Received a TaskDriverEventHandler: TaskDriverEventArgs.EventCriticalityType info, TaskDriverEventArgs.EventType notify,
message Total number of configuration settings run: 5
07/27/2014 14:45:34 1 INF Leaving function CommandLine.TaskDriverEventHandler
07/27/2014 14:45:34 1 INF Leaving function TaskDriver.FireOnTaskDriverEvent
07/27/2014 14:45:34 1 INF Leaving function TaskDriver.OnTaskDriverNotify
07/27/2014 14:45:34 1 INF Entering function StringResourceManager.GetResourceString
07/27/2014 14:45:34 1 INF Resource id to be retrieved is TotalTasksSucceeded for language English (United States)
07/27/2014 14:45:34 1 INF Resource retrieved id TotalTasksSucceeded is Total number of successful configuration settings: {0}
07/27/2014 14:45:34 1 INF Leaving function StringResourceManager.GetResourceString
07/27/2014 14:45:34 1 INF Entering function TaskDriver.OnTaskDriverNotify
07/27/2014 14:45:34 1 INF Sending a task driver notify event: TaskDriverEventArgs.EventCriticalityType: info, TaskDriverEventArgs.EventMessageType: totalsuccess, TaskDriverEventArgs.EventType.notify,
message: Total number of successful configuration settings: 4
07/27/2014 14:45:34 1 INF Entering function TaskDriver.FireOnTaskDriverEvent
07/27/2014 14:45:34 1 INF Entering function CommandLine.TaskDriverEventHandler
07/27/2014 14:45:34 1 INF Received a TaskDriverEventHandler: TaskDriverEventArgs.EventCriticalityType info, TaskDriverEventArgs.EventType notify,
message Total number of successful configuration settings: 4
07/27/2014 14:45:34 1 INF Leaving function CommandLine.TaskDriverEventHandler
07/27/2014 14:45:34 1 INF Leaving function TaskDriver.FireOnTaskDriverEvent
07/27/2014 14:45:34 1 INF Leaving function TaskDriver.OnTaskDriverNotify
07/27/2014 14:45:34 1 INF Entering function StringResourceManager.GetResourceString
07/27/2014 14:45:34 1 INF Resource id to be retrieved is TotalTasksFailed for language English (United States)
07/27/2014 14:45:34 1 INF Resource retrieved id TotalTasksFailed is Total number of unsuccessful configuration settings: {0}
07/27/2014 14:45:34 1 INF Leaving function StringResourceManager.GetResourceString
07/27/2014 14:45:34 1 INF Entering function TaskDriver.OnTaskDriverNotify
07/27/2014 14:45:34 1 INF Sending a task driver notify event: TaskDriverEventArgs.EventCriticalityType: info, TaskDriverEventArgs.EventMessageType: totalfail, TaskDriverEventArgs.EventType.notify,
message: Total number of unsuccessful configuration settings: 1
07/27/2014 14:45:34 1 INF Entering function TaskDriver.FireOnTaskDriverEvent
07/27/2014 14:45:34 1 INF Entering function CommandLine.TaskDriverEventHandler
07/27/2014 14:45:34 1 INF Received a TaskDriverEventHandler: TaskDriverEventArgs.EventCriticalityType info, TaskDriverEventArgs.EventType notify,
message Total number of unsuccessful configuration settings: 1
07/27/2014 14:45:34 1 INF Leaving function CommandLine.TaskDriverEventHandler
07/27/2014 14:45:34 1 INF Leaving function TaskDriver.FireOnTaskDriverEvent
07/27/2014 14:45:34 1 INF Leaving function TaskDriver.OnTaskDriverNotify
07/27/2014 14:45:34 1 INF Leaving function TaskDriver.NotifyTaskSummary
07/27/2014 14:45:34 1 ERR One or more configuration tasks has failed or some tasks were not run
07/27/2014 14:45:34 1 INF Entering function StringResourceManager.GetResourceString
07/27/2014 14:45:34 1 INF Resource id to be retrieved is PostSetupConfigurationStoppingSucceeded for language English (United States)
07/27/2014 14:45:34 1 INF Resource retrieved id PostSetupConfigurationStoppingSucceeded is Successfully stopped the configuration of SharePoint Products.
07/27/2014 14:45:34 1 INF Leaving function StringResourceManager.GetResourceString
07/27/2014 14:45:34 1 INF Entering function TaskDriver.OnTaskDriverStopping
07/27/2014 14:45:34 1 INF Sending a task driver stopping event: TaskDriverEventArgs.EventCriticalityType info, TaskDriverEventArgs.EventType.stopping, Successfully stopped the configuration
of SharePoint Products.
07/27/2014 14:45:34 1 INF Entering function TaskDriverStateChange.Enter
07/27/2014 14:45:34 1 INF Acquiring the writer lock to change the state
07/27/2014 14:45:34 1 INF Current state of the task driver is neverrun. You want to change it to stoppingrun
07/27/2014 14:45:34 1 INF Changed state of the task driver to neverrun
07/27/2014 14:45:34 1 INF Released the writer lock to change the state
07/27/2014 14:45:34 1 INF Leaving function TaskDriverStateChange.Enter
07/27/2014 14:45:34 1 INF Entering function TaskDriver.FireOnTaskDriverEvent
07/27/2014 14:45:34 1 INF Entering function CommandLine.TaskDriverEventHandler
07/27/2014 14:45:34 1 INF Received a TaskDriverEventHandler: TaskDriverEventArgs.EventCriticalityType info, TaskDriverEventArgs.EventType stopping, message
Successfully stopped the configuration of SharePoint Products.
07/27/2014 14:45:34 1 INF Leaving function CommandLine.TaskDriverEventHandler
07/27/2014 14:45:34 1 INF Leaving function TaskDriver.FireOnTaskDriverEvent
07/27/2014 14:45:34 1 INF Leaving function TaskDriver.OnTaskDriverStopping
07/27/2014 14:45:34 1 INF Leaving function TaskDriver.ExecuteTasks
07/27/2014 14:45:34 1 ERR One or more configuration tasks has failed to execute
07/27/2014 14:45:34 1 INF Entering function TaskDriver.Stop
07/27/2014 14:45:34 1 INF Entering function StringResourceManager.GetResourceString
07/27/2014 14:45:34 1 INF Resource id to be retrieved is PostSetupConfigurationFailedEventLog for language English (United States)
07/27/2014 14:45:34 1 INF Resource retrieved id PostSetupConfigurationFailedEventLog is Configuration of SharePoint Products failed. Configuration must be performed in order
for this product to operate properly. To diagnose the problem, review the extended error information located at {0}, fix the problem, and run this configuration wizard again.
07/27/2014 14:45:34 1 INF Leaving function StringResourceManager.GetResourceString
07/27/2014 14:45:34 1 ERR Configuration of SharePoint Products failed. Configuration must be performed in order for this product to operate properly. To diagnose the problem, review
the extended error information located at C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\14\LOGS\PSCDiagnostics_7_27_2014_14_45_17_500_877544068.log, fix the problem, and run this configuration wizard again.
07/27/2014 14:45:34 1 INF Entering function StringResourceManager.GetResourceString
07/27/2014 14:45:34 1 INF Resource id to be retrieved is PostSetupConfigurationFailedUserMessage for language English (United States)
07/27/2014 14:45:34 1 INF Resource retrieved id PostSetupConfigurationFailedUserMessage is Configuration of SharePoint Products failed. Configuration must be performed before
you use SharePoint Products. For further details, see the diagnostic log located at {0} and the application event log.
07/27/2014 14:45:34 1 INF Leaving function StringResourceManager.GetResourceString
07/27/2014 14:45:34 1 INF Entering function TaskDriver.OnTaskDriverStop
07/27/2014 14:45:34 1 INF Sending a task driver stop event: TaskDriverEventArgs.EventCriticalityType error, TaskDriverEventArgs.EventType.stop, Configuration of SharePoint Products
failed. Configuration must be performed before you use SharePoint Products. For further details, see the diagnostic log located at C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\14\LOGS\PSCDiagnostics_7_27_2014_14_45_17_500_877544068.log
and the application event log.
07/27/2014 14:45:34 1 INF Entering function TaskDriverStateChange.Enter
07/27/2014 14:45:34 1 INF Acquiring the writer lock to change the state
07/27/2014 14:45:34 1 INF Current state of the task driver is neverrun. You want to change it to stoppedrunning
07/27/2014 14:45:34 1 INF Changed state of the task driver to neverrun
07/27/2014 14:45:34 1 INF Released the writer lock to change the state
07/27/2014 14:45:34 1 INF Leaving function TaskDriverStateChange.Enter
07/27/2014 14:45:34 1 INF Entering function TaskDriver.FireOnTaskDriverEvent
07/27/2014 14:45:34 1 INF Entering function CommandLine.TaskDriverEventHandler
07/27/2014 14:45:34 1 INF Received a TaskDriverEventHandler: TaskDriverEventArgs.EventCriticalityType error, TaskDriverEventArgs.EventType stop, message Configuration
of SharePoint Products failed. Configuration must be performed before you use SharePoint Products. For further details, see the diagnostic log located at C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\14\LOGS\PSCDiagnostics_7_27_2014_14_45_17_500_877544068.log
and the application event log.
07/27/2014 14:45:34 1 INF Leaving function CommandLine.TaskDriverEventHandler
07/27/2014 14:45:34 1 INF Leaving function TaskDriver.FireOnTaskDriverEvent
07/27/2014 14:45:34 1 INF Leaving function TaskDriver.OnTaskDriverStop
07/27/2014 14:45:34 1 INF Leaving function TaskDriver.Stop
07/27/2014 14:45:34 1 INF UnLocking the task driver for exclusive use while we ran tasks
07/27/2014 14:45:34 1 INF Leaving function TaskDriver.Run
07/27/2014 14:45:34 1 ERR Post setup configuration was not run successfully when using the command line task driver module
07/27/2014 14:45:34 1 INF Leaving function PsconfigCommandLineMain.Mainn
Maybe you are looking for
-
User Exit - adding defualt WBS Element in addi.tab for IW31 - Servi.Order
I am facing a problem with adding WBS Element in Addit.Data tab for Service Order creation using IW31. At the time of creating service order using TCODE IW31, I have to maintian default values like WBS ELEMENT, for this I am using a USER EXIT "IWO100
-
Photoshop shutting down - error code (-600)
Hi Adobes, I have had some problems recently with my new computer and adobe creativ suite 4. When im working on a new design or project, photoshop sometimes shuts down without warning, this is a major problem for me.. I asked someone in an apple rese
-
Using jms names with a / in it...?
With the following wlst-code I try to create a Jms Uniform Distributed Queue thru wlst. def createJmsUdq(qName,sysName): print 'INFO: createJmsUdq '+qName cd('/') cd('/JMSSystemResources/'+sysName+'/JMSResource/'+sysName) cmo.createUniformDistributed
-
Radiobuttons in tableView/iterator environment
Hi, I'd like to build and display a matrix of radiobuttons with a name/title for each row and also for each column. Every row of the matrix should form a radiobutton group, i.e. per line one and only one radiobutton should be selectable. Both dimensi
-
Changing file access permissions?!
I have a MacBook Pro retina running os x mountain lion, if that helps any of you guys answer this question. I recently took a screenshot of an area of the screen using the command-shift-4 combination. When i was trying to open it, though, an error c