Install SL OS and a boot camp as disconnected from internet?

i am considering installing an install of Snow Leopard and Boot Camp Windows XP on a hard drive in my Mac Pro and i am wondering if i can keep this disk/OS disconnected from the internet.
i am assuming that Safari and Mac mail will come pre-loaded with the OS but i am wondering if there is a way to keep this a very stripped down without all the annoyances of being connected.
my other OS's are utilizing the world wide web in this machine.
TIA

Since I do absolute nothing with anything from Microsoft, I am going to have to guess here on that and say that I doubt it seriouslly.
There must be a way to turn off the network under Windows I would guess in a similar way that I suggested for OS X is also my guess. Exactly how to do that would take someone more knowledgable with Windows then me. Sorry.
Allan

Similar Messages

  • Installing Windows 7 RC1 with Boot Camp AND Parallels?

    I have a 24" iMac (2009 model) and have successfully installing Windows 7 RC1 using Boot Camp. No problems at all and everything is working fine. But now I'm contemplating purchasing Parallels and using Windows 7 in a window.
    I just need to know the steps involved and how this works. First I purchase and install Parallels. Then I run it and somehow tell it to use my Boot Camp partition for the VM, right? In this way, I'm assuming I don't actually have to install Windows 7 again or make another partition, right? Once I get the VM installed, then I can either boot to Windows 7 from startup OR boot from within Mac OS using Parallels and it would be the same?
    If I can do it this way, can anyone point me to step-by-step instructions on how to choose the right settings in Parallels? I have found instructions for installing Windows 7 using Boot Camp and Parallels separately, but not how to use the Boot Camp install for the VM in Parallels.

    Wow, it was much easier than I thought it would be! Downloaded the trial of Parallels. Installed it and pointed it to my Boot Camp partition with Windows 7 installed on it. And minutes later, I'm up and running with Windows 7 in Parallels. Sound didn't work at first, but after I did a Windows Update, it installed the correct driver and now everything is working great. I can't believe how smooth this thing runs within Leopard. I allocated 1GB of RAM for WIndows 7 and it's seems fine so far, but I really haven't run any resource-intensive apps yet.

  • Can not install windows 7 pro using boot camp as mouse and keyboard will not work Help please

    I have a new iMac and trying to install Windows 7 Pro using boot camp. I have reached the stage of starting to load windows from the DVD then discovered the mouse and the keyboards not working so I could not interact with windows installation.

    Open, if not so already, the Windows formatter. Identify the BC Windows partition. It will be the one listed with the proper size you created and/or will be labeled as a C: drive. Be careful you select the right one or you may be corrupting the entire drive.
    Format the partition as NTFS.

  • I am using windows Macbook pro 15 retina display model with latest mountain lion 10.8.3 software Have installed windows 8 perfectly via boot camp. However many a time the machine is not able to boot windows 8 and aborts. just shows the green screen for a

    I have installed Windows 8 perfectly ia boot camp but on booting the windows 8 does not load up fully. It comes upto the windows green screen for a moment and then goes blanlk. It is very frustrating.

    no one has replied me too got this issue ,

  • I installed windows 7 using Boot camp, Then i wanted to install the support software using boot camp and it always stops at 50% i tried installing the software using internet it always gives me error when i start installing it on windows, What to do?

    I installed windows 7 using Boot camp, Then i wanted to install the support software using boot camp and it always stops at 50% i tried installing the software using internet it always gives me error when i start installing it on windows, What to do?

    What is the error? Are you following the Bootcamp instructions? Where on the "internet" are you trying to install from? Did you try downloading from here http://www.apple.com/support/bootcamp/downloads/?

  • Friends, MacBook Pro 8,1 – Intel Core i5 – 2.23 GHz (early 2011)   New MB Pro with OSX 10.6 – current on all updates.  I successfully installed rEFit. I used Boot Camp to install Win 7.  All was great.  Then installed debian 6.  Somehow after the debian i

    MacBook Pro 8,1 – Intel Core i5 – 2.23 GHz (early 2011) New with OSX 10.6 – current on all updates.
    I successfully installed rEFit. I used Boot Camp to install Win 7.  All was great.
    Then installed debian 6.  Somehow after the debian install and restart (I know this sounds crazy) but I am now reduced to Win 7 only. rEFit is not present when rebooting nor is OSX or debian. Further, I am unable to force the install DVD to launch when rebooting, by holding C, D or F8.  The Option key brings me to the grey screen with a padlock. I have attempted the root and local pw- no go. Restart holding D takes me to the windows boot manager. I have attempted several options within the Advanced Options; including – Repair Your computer, safe mode and “last known good config,” All of which did nothing.
    I can see all my OSX files within win7. I tried to install the OSX within windows. Ya right, that did nothing..
    I only desire to get back to OSX...
    What are my options??

    Yes, you royally hosed up your machine.
    You should first try to get your files off, any way you can to a external drive.
    Your going to need to hold c and boot from the disk that came with your computer and a couple of screens in under the menu is a option for Disk Utility.
    Select your drive and Erase with Security Option Zero, format the drive HFS+ Journaled and when that's finished (about a hour or so) then quit and install OS X from the installer.
    I hope this works, but I suspect it won't. Others have hosed their machines trying to use a Linux disk without proper partition formatting too.
    Another option might be to use another Mac to c boot off the Snow Leopard disk and install OS X onto a external drive, take that to the problem Mac and try holding option and booting off of it to erase your internal drive.
    You could replace the drive.
    frederick s wrote:
     The Option key brings me to the grey screen with a padlock.
    Is this holding option while booting?
    There was someone else around here who hosed their Mac with a Linux disk too. Try to find it.

  • Install Windows 8.1 with Boot Camp

    Greetings you all,
    I've been trying to install WIndows 8(.1) on my MacBook Pro early 2011, but without any success. I downloaded the .ISO of Windows, stored it on my external HDD, downloaded the software via Boot Camp to host Windows (I'm sorry I'm french so I'll have to translate everything) and put it on another external HDD, and when I plug them to my Mac and start the installation of Windows, it doesn't detect the USB.
    What should I do? If possible, avoiding any installation of the disk image on a DVD.
    Thanks.

    Hello Mickaelpopo,
    Thank you for the question.  It sounds like you are trying to install Windows 8.1 using Boot Camp 5 on your MacBook Pro.  Currently, Windows 8.1 is not a supported version of Windows for Boot Camp:
    Which versions of Windows work with Boot Camp 5?
    You can use:
    Microsoft Windows 8.0 (64-bit)
    Microsoft Windows 8.0 Pro (64-bit)
    Microsoft Windows 7 Home Premium (64-bit)
    Microsoft Windows 7 Professional (64-bit)
    Microsoft Windows 7 Ultimate (64-bit)
    Windows XP, Windows Vista, and Enterprise versions of Windows 7 and Windows 8 are not supported.
    Windows 8.1 is not supported with Boot Camp 5.
    You can find more information here:
    Boot Camp 5: Frequently asked questions
    http://support.apple.com/kb/HT5639
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • Can't install windows 8.1 with boot camp

    I'm trying to install windows 8.1 with boot camp and this is the message I keep getting. I've tried several times and every time I get this. I have a 2015 MacBook Pro. I've tried installing from a usb with ISO and also from a oem windows dvd. Any help would be appreciated. 

    Excellent.
    Windows installation has four or five reboots, and the Apple BootManager tracks such reboots via the Mac NVRAM, otherwise the next reboot will cause OS X to boot rather than Windows. It is also used to set up some variables used to pass information to the CSM-BIOS layer. If an installation has failed, the variables do not reflect the current and clean state of the machine. A NVRAM reset will re-initialize these variables for the next attempt.

  • How can I partition internal HDD after installing Windows 7 Professional via Boot Camp 4.0?

    I recently purchased MacBook Pro 13" (Late 2011) model with OS X v10.7.2 Lion installed. I've upgraded to OS X v10.7.3 Lion and updated all other software.
    I require Windows 7 for some Windows based softwares that do not support Mac OS X. Therefore, used Boot Camp 4.0 to install Windows 7 and then tried partitioning single internal HDD  to have 3 partitions (4 total including BOOTCAMP partition). Disk Utility created a 648.5MB partition and then I was able to create 3 other partitions of custom sizes. After applying these changes, I got an error message that said selected volume size is too small. I resized this 648.5MB partion to a custom size and had total 4 partitions, including BOOTCAMP.
    After reapplying these changes, BOOTCAMP partition was removed and I was left with only 3 partitions and empty space.
    I've tried several different ways to partition the disk, all in vein. Is there a way I can partition my single internal HDD after installing Windows 7 Professional via Boot Camp 4.0?

    You can't do what you want with GUI utilities, which will only allow a total of 4 partitions due to the limitation of MBR needed to support Windows. Those four partitions: EFI System (hidden), Mac OS, Recovery HD (hidden), Windows. So with Lion, you only get two visible partitions if you're going to use Windows with BootCamp. You can't make anymore with the included graphical tools.
    If you need more partitions you'll need to use something like GPT fdisk (gdisk) to create the partitions in the GPT first. Then add the Windows partition only to the MBR and flag it as bootable. gdisk can be googled and downloaded for Mac OS X off sourceforge. It is not a GUI tool.
    You should read this:
    http://www.rodsbooks.com/gdisk/
    And this:
    http://www.rodsbooks.com/gdisk/hybrid.html

  • Trouble installing Windows 8.1 with Boot Camp

    I'm having an issue installing Windows 8.1 under Boot Camp on one of the new MacBook Pros (late 2013).  After sever troubles (and not a few tribulations) fighting with the stupid Windows installer program (couldn't Microsoft just let me download a freakin' ISO?) I got the installer running after creating the partition, but at the end of the Windows install, I get:
    Windows could not update the computer's boot configuration. Installation cannot proceed.
    Googling around for a solution I found several references to UEFI problems, along with a couple different procedures that were claimed to work.  Unfortunately, these procedures were pretty lengthy and require several third party tools -- and I'm not positive they're even applicable because none of them dealt with the newest model of MacBook Pro.
    So, can anyone out there point me towards a procedure that's known to work with the new models?
    Thanks.

    OK... Finally solved the problem during my winter break... took almost 1.5 months Actually we users are creating the problem... Bootcamp is OK... our late 2013 Mac is OK... but Apple is't as it's not giving us the solution Now let me clear concisely what actually occurs behind the problem.
    When you open bootcamp to install Windows, you get a popup window. Then you click continue... then you choose the options among the three which suits to your intention. Then if you chose to create a installation disk or/and download the Windows Support Software, bootcamp does so. Then the nextPROBLEMETIC STEP comes! Yes! you got it! This step creates the actual problem: Partitioning the hard disk for installing Windows. Before bootcamp starts partitioning, a simple POPUP WINDOW will inform you whether you will get the f*cking "Windows could not update the computer's boot configuration. Installation cannot proceed" message or not during your windows installation! Andddd... the popup window is here:
    Soooo... super duper simple fact: if you don't get this popup window, you're going to get that error. Because this HELPER TOOL will simulate proper environment for installing Windows in your Mac
    Now be sure:
    1. You just have one partion in your Hard Disk before partitioning it into two for installing Windows
    2. This PARTITIONING SHOULD ONLY BE DONE BY BOOTCAMP if you want your Windows in EFI mode. The way jarvil told us is for BIOS mode. I'm not going to explain here what is EFI and what is BIOS. Simply keep in mind that EFI is latest, better and faster for booting your Windows
    That's it guys! If you don't get that popup window, follow the instructions:
    1. Turn your hard disk into a single partition by using Bootcamp/Disk Utility. Bootcamp is recommended
    2. Take a flash drive, format it, and then open Bootcamp
    3. Choose all the three options:
         Create a Windows 7 or later vertion install disk
         Download the latest Windows Support software from Apple
         Install or remove Windows 7 or later version
    Yes! We are going to create a new installation disk...
    4. I know you are clever enough to guess what should you do now!  Just enter your password when you get THAT SPECIAL POPUP WINDOW!Then Mac will restart after partitioning your hard disk!
    5. Do noting untill the windows installation window comes
    6. Go forward pressing Next, putting serial, and accepting the agreement that we never read
    7. Select advanced installation... I mean the second option
    8. Now find the partition named BOOTCAMP
    9. Select it and Format it!
    10. Click Next
    You are done! Your Mac will install windows without any problem or error message   After installation, if you find that your drivers aren't working, go to the installation disk and open the folder named BOOT CAMP. Open the exe named Setup... Install the drivers and restart after completion... Your Mac now owns Windows in EFI mode like mine!
    That's all I have known killing my winter break! Thanks everyone! Take care!

  • Frozen Windows 7 install at DOS cursor with Boot Camp 5.0

    Hello,  I am installing windows 7 (32 bit) on a mid 2012 Mac Book Air (13 in) using install version of windows 7 DVD from external superdrive and boot camp 5.0.  After boot camp partitions I go to a black screen with blinking DOS cursor and nothing happens, no disc sound, nothing.  I have installed windows 7 with older boot camp and macs with no problems.  I am running OS 10.8.2
    Thanks for any help.

    I tried a third time (boot camp requires you to revome the windows partition before you can re-install).  For some reason after the third attempt at installing from boot camp it finally worked. 
    BTW, I am using an apple USB superdrive and I tried the option key to boot from the Windows partition and it went into the dos screen and the error message was no bootable media or something. 
    Thanks for your help.

  • Black screen when installing Windows XP on new Boot Camp partition

    I just upgraded my iMac Intel Alum to Leopard and used Boot Camp to create the Windows partition. When I try to install Windows XP from the install disk, I just get a black screen with a blinking cursor in the upper left corner. Is it having trouble finding the Boot Camp partition for the Windows install? Everything else is working fine. Leopard still boots okay and everything works in Mac OS - I just can't get to the next step of installing Windows.
    Thanks in advance,
    David

    When I say disk image, I mean a copy of a friend's Windows XP install disk . Even though it's a copy, it boots a PC fine. Any reason why it wouldn't work on the Mac?

  • Can not install a Windows ISO in Boot Camp

    I created a partition for Boot Camp and I am ready to install Windows. Downloaded a trial Windows 7 ISO from MS and copied to a flash drive. Boot Camp does not recognize the ISO and is looking for an installation disk. How can I Install the downloaded ISO?

    Hi NCMau,
    Welcome to the Apple Support Communities!
    I understand that you are trying to install Windows using Bootcamp on your Apple computer. I understand you are using a trial version of Windows as well. To install Windows via Bootcamp on your Apple computer, Windows must be the full version. Please refer to the attached article for further information.
    Mac Basics: Using Windows on your Mac with Boot Camp - Apple Support
    Requirements
    To use Boot Camp, you need:
    An Intel-based Mac with a built-in keyboard, external USB keyboard, or an Apple supplied wireless keyboard, and a built-in trackpad, USB mouse, USB trackpad, or Apple supplied wireless mouse or trackpad.
    Mac OS X v10.5 or later.
    The latest firmware updates available for your Mac.
    Boot Camp Assistant, which is located in /Applications/Utilities/ . You can also open Launchpad and type Boot Camp Assistant in the search field.
    A DVD or downloaded (ISO) "full version" of Windows installation media. Boot Camp does not include Windows.
    For additional requirements, see Boot Camp: System requirements for Microsoft Windows
    Cheers,
    Joe

  • I just updated to OS X 10.9.2 and My boot camp assistant won't turn on.

    I'm trying to install Windows 7 as I did before.
    But now, when i double click the boot camp assistant on desktop it gives me the error message window and says "Boot Camp Assistant has quit unexpectedly".
    Please help.

    When I got the computer, boot camp assistant was on the desktop and I used it to install windows 7 before.
    I have never really seen it on my applications folder and right now it isn't in my applications folder either.
    Would this be the problem?
    I couldn't find out how to re-download the boot camp assistant either...

  • Just installed windows 7 Ultimate using Boot Camp. Problem is when I chose to boot the windows partition, I get the windows icon on the sreen showing that it is starting, but few second after I get a black screen

    Just installed windows 7 Ultimate using Boot Camp. Problem is when I choose to boot the windows partition, I get the windows icon on the screen showing that it is starting, but few second after, I get a blank screen. I suspect a driver (screen) issue, since I also installed Parallell using the boot camp partition and that works fine.
    Do anybody out there has an ideal of what to do to solve this issue.
    Thanks
    Pierre317

    Hi Pierre,
    more tips can be found here ...

Maybe you are looking for