Install SNMP on UM 3.2
Hi,
anybody has advices on how to install the package "net-snmp" on UM 3.2 ?
Thank you in advance,
Simone
Hi,
I installed the following rpm packages from the SLES 11 iso:
rpm -i perl-TermReadKey-2.30-135.22.x86_64.rpm
rpm -i libsensors3-2.10.6-10.15.x86_64.rpm
rpm -i snmp-mibs-5.4.2.1-8.12.16.1.x86_64.rpm
rpm -i libsnmp15-5.4.2.1-8.12.16.1.x86_64.rpm
rpm -i perl-SNMP-5.4.2.1-8.12.16.1.x86_64.rpm net-snmp-5.4.2.1-8.12.16.1.x86_64.rpm
testing with snmpwalk, it works locally but not from network. Seems no firewall is active, ideas ?!?!
Simone
Similar Messages
-
Hello,
I have a v120 server installed with the minimum installation of solaris 10 06/06.
I successfully installed a lot of package from sunfreeware.com, but now I need to install snmp to generate graphs from cacti.
My solaris knowledge is very limited, and I can't find a doc to to that.
Please, could you tell me how to :
1. Know the required packages to run snmp deamon ? (names?? on the dvd?)
2. The command to install them ?
Then I suppose that there is a cummunity account or I'll add it in snmp.conf....
Thanks you for your help, bigadmins :) !
See ya
RBHi Author 5056,
I saw your question about snmp on W2K Pro and wanted to know how you were able to properly path out the environment variables under My Computer properties. I have tried everything but still cannot get Sun One Application Server 7 to run.
Can you help?
Thanks! -
No Option To Install SNMP Service on Windows Server 2012 Standard
Hi,
was wondering if someone could help me with the below issue.
i am trying to install the SNMP service on our new 2012 server however the role doesn't even exist?
could someone advice on how we can install this role? i have looked everywhere but am unable to find an answer
thanking all in advancethe snmp role is being depreciated and replaced by CIM.
but you should still be able to add it.
its a feature - from server manager select install roles and features, click through the roles till you get to the features page and select snmp from the list
Regards,
Denis Cooper
MCITP EA - MCT
Help keep the forums tidy, if this has helped please mark it as an answer
My Blog
LinkedIn: -
How to enable/install SNMP daemon on MARS?
I need to enable SNMP on a MARS 6.x box, so it can be remotely monitored and provide health metrics. Does anyone know how to do this? I thought the old 4.x had it installed, but disabled. I can't remember how I enabled it and need to do this on a 6.x box. Any help is appreciated.
TonyI too ran into this. Not for SNMP, but for auditing purposes and I wanted root access. TAC says no go unless they are debugging a serious problem.
So, I stopped thinking of this as a mystical black box, and started thinking of it as what it really is: a linux box as someone prior has stated.
Well, since it's just a linux box, during the install you can press alt-F2 and get a second tty. From there you can perform all manner of fun things that would indeed give you root access. This could also be done with sysrescue or similar...
Having said this, I certainly don't recomend tampering with a ``sealed system'' for a number of reasons, the primary one being that TAC won't be able to help you very much if you hose it. -
How to install snmp service on win2k pro?
Hi all,
i can not find snmp service on my computer so i do not know how to start it, can somebody help me, thanks!Hi Author 5056,
I saw your question about snmp on W2K Pro and wanted to know how you were able to properly path out the environment variables under My Computer properties. I have tried everything but still cannot get Sun One Application Server 7 to run.
Can you help?
Thanks! -
Hi all,
I need a script so that once it is run on windows 2012 server r2 ,snmp should be installed and configured automatically ,giving minimum user inputs.Things like snmp server ip,community string shouls be configured.
SNMP services should be up and running with the scriptHi,
Please check if you can use
Install-WindowsFeature PowerShell command to enable SNMP. Meanwhile, please also refer to following article and check if can help you.
How
to Install SNMP Remotely
However, based on your description, the issue seems to be more related to script. I suggest that you should
post it in
Windows PowerShell forum or
Official Scripting Guys forum. I believe we will get a better assistance there.
Hope this helps.
Best regards,
Justin Gu
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected] -
Powershell - SNMP Service Install (Server 2008)
Hello, so this is a follow up to the assistance that was provided to me yesterday about checking to see if the SNMP service was installed across multiple servers. I was able to gather a list of devices that require the SNMP service to be installed,
and (thankfully) most of them are Server 2008 machines. The pre-2008 machines I will just hit manually, since there are less than 20 of them, and to minimize confusion, and a lack of powershell knowledge from my side.
I have approximately 120 servers that will require the service to be installed onto them, and was looking to do this via powershell. Luckily, I was able to find this great script online, and I have tested it with my own variables inserted, and it works
great (for one server, ran manually on it). I was wondering if somebody could help me figure out how to get the script to do the following two things:
1. Install the SNMP service to multiple servers from a text file (I attempted this with the get-content).
2. Output the results to either a text file or a csv file (also tried this as can be seen below).
Here is the script, with what I tried (and failed). The only two lines of code that are mine, are the very top one and the very bottom one, I will bold them to indicate that. Thanks for any help that may be offered.
#Powershell Script To Install SNMP Services (SNMP Service, SNMP WMI Provider)
Get-Content .\servers.txt
#Variables :)
$pmanagers = "MY VARIABLE 1"
$commstring = "MY VARIABLE 2"
#Import ServerManger Module
Import-Module ServerManager
#Check If SNMP Services Are Already Installed
$check = Get-WindowsFeature | Where-Object {$_.Name -eq "SNMP-Services"}
If ($check.Installed -ne "True") {
#Install/Enable SNMP Services
Add-WindowsFeature SNMP-Services | Out-Null
##Verify Windows Servcies Are Enabled
If ($check.Installed -eq "True"){
#Set SNMP Permitted Manager(s) ** WARNING : This will over write current settings **
reg add "HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\SNMP\Parameters\PermittedManagers" /v 1 /f /t REG_SZ /d localhost | Out-Null
#Used as counter for incremting permitted managers
$i = 2
Foreach ($manager in $pmanagers){
reg add "HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\SNMP\Parameters\PermittedManagers" /v $i /f /t REG_SZ /d $manager | Out-Null
$i++
#Set SNMP Community String(s)- *Read Only*
Foreach ( $string in $commstring){
reg add "HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\SNMP\Parameters\ValidCommunities" /v $string /f /t REG_DWORD /d 4 | Out-Null
Else {Write-Host "Error: SNMP Services Not Installed"}
| Export-Csv .\SNMP_Install.csv -NoTypeInformationhere is what the GP settings looks like:
SNMP Service
Data collected on: 3/20/2014 10:58:08 AM
General
Details
Domain
TESTNET.local
Owner
TESTNET\Domain Admins
Created
3/20/2014 10:53:20 AM
Modified
3/20/2014 10:57:54 AM
User Revisions
0 (AD), 0 (sysvol)
Computer Revisions
3 (AD), 3 (sysvol)
Unique ID
{8B82351A-5BF0-47F7-8549-71C2D592FF72}
GPO Status
Enabled
Links
Location
Enforced
Link Status
Path
None
This list only includes links in the domain of the GPO.
Security Filtering
The settings in this GPO can only apply to the following groups, users, and computers:
Name
NT AUTHORITY\Authenticated Users
Delegation
These groups and users have the specified permission for this GPO
Name
Allowed Permissions
Inherited
KAHLNET\Domain Admins
Edit settings, delete, modify security
No
KAHLNET\Enterprise Admins
Edit settings, delete, modify security
No
NT AUTHORITY\Authenticated Users
Read (from Security Filtering)
No
NT AUTHORITY\ENTERPRISE DOMAIN CONTROLLERS
Read
No
NT AUTHORITY\SYSTEM
Edit settings, delete, modify security
No
Computer Configuration (Enabled)
Policies
Administrative Templates
Policy definitions (ADMX files) retrieved from the local machine.
Network/SNMP
Policy
Setting
Comment
Communities
Enabled
Communities
public
Policy
Setting
Comment
Permitted Managers
Enabled
Permitted Managers
BUILTIN\Administrators
Policy
Setting
Comment
Traps for public community
Enabled
Trap configuration
test-trap-1
User Configuration (Enabled)
No settings defined.
¯\_(ツ)_/¯ -
How to configure SNMP agent for Oracle 10g
Hello,
I've installed oracle 10g in a Windows 2000 SP4 and I want to monitor database using SNMP.
I've already installed Windows SNMP agent but I haven't any idea how to configure Oracle in order to grant SNMP monitoring.
What should I do?
Is Oracle database ready to be monitored via SNMP by default?
Thanks in advance for your help.
Regards,
CarlesHello,
Thanks for your message.
In fact, I already found this doc in oracle, but it just show executables I have to install and my question can I install these executables.
I've already installed Windows SNMP agent, configured and testedwith disk space checkings, but it doesn't work fine with Oracle.
I launched Oracle Universal Installer and I checked Installed Products, but I haven't found how to install SNMP agents for oracle.
How can I add Oracle Peer Master Agent and Encapsulator to my oracle installation?
Thanks again for your help.
Regards,
Carles -
Missing agent, trap,security tabs in snmp service tab!
Missing agent, trap,security tabs in snmp service tab after installing snmp from powershell script!!
I run the script on win server 2008 and 2012
Could someone help..
Thanks for the help in advance
AshwiniHi Ashwini,
To install the snmp service, please refer to the script below:
#Import ServerManger Module
Import-Module ServerManager
#Check If SNMP Services Are Already Installed
$check = Get-WindowsFeature | Where-Object {$_.Name -eq "SNMP-Services"}
If ($check.Installed -ne "True") {
#Install/Enable SNMP Services
Add-WindowsFeature SNMP-Services | Out-Null
After installing this service, please try to reboot if you can, and check the tabs, a similar dscussion is for your reference:
How to configure SNMP on Windows 2008 Server
If there is anything else regarding this issue, pease feel free to post back.
Best Regards,
Anna Wang
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected] -
Help Please! Setting up SNMP on a ESW 540 48 port switch
Hi There! This is my first post and I have no idea what I am doing when it comes to SNMP. We are trying to evaluate our network performance, so we have downloaded a copy of Solarwind’s Orion and installed it on a server. The topology is as follows.
A SBS 2003 R2 Server running normal programs. A second Server 2003 R2( IP 1.2.3.4) running a proprietary program for the business and, hopefully, Orion soon. The two servers and about 20 XP professional workstations are connected to the esw 540 48 port. An uplink is attached to a consumer grade Linksys that has 5 workstations attached. I was told to install SNMP on the workstations behind the Linksys, so I did with the community name = public, Rights = Read Only, and Accept packets from these hosts = localhost and server 1.2.3.4
I am wondering what configuration I need to do (it is confusing to me) through the cisco web application to set up the switch so that it will communicate with server 1.2.3.4 and the Orion program. We may switch programs in the future (we are not tied to Orion), but it is what we have to set up the switch with. I am mainly looking for network throughput information and usage.
There are just so many options. Any help would be appreciated…. ericAre you trying to use 2 wireless routers in the network?
Follow this link for cascading (Connecting) a Linksys Router to Another Router . -
Hi guys...
I need to install SNMP daemon on a SOLARIS 9, that have a Check Point firewall running.
How it�s do?
thx.
loop.-personally, I prefer the Net-SNMP snmpd. A lot less package requirements, integrates nicely with Perl5.8, cross platform, and
provides almost all the same features as the Sun one. On netras I do trap forwarding to the Sun Netra Management agent for extended 'IPMI' (platform) info about the server management base and FRUs. -
Hello, my installation fails somehow ... it looks like some path is missing. I try to unset LD_LIBRARY_PATH, but it has no effect. Have you ever met similar problem? Thanks for any idea. Here is a part of my installation log:
ERROR: information for "SUNWamjdk" was not found
x LICENSE.txt, 22524 bytes, 44 tape blocks
x README.txt, 383 bytes, 1 tape blocks
x WebServer, 0 bytes, 0 tape blocks
x WebServer/WebServer.inf, 1911 bytes, 4 tape blocks
x WebServer/mktempfile, 6660 bytes, 14 tape blocks
x WebServer/preinstall-core, 1253104 bytes, 2448 tape blocks
x WebServer/preinstall-jc, 1218672 bytes, 2381 tape blocks
x WebServer/preinstall-java, 1230712 bytes, 2404 tape blocks
x WebServer/preinstall-i18n, 1232396 bytes, 2408 tape blocks
x WebServer/preinstall-cleanup, 1222808 bytes, 2389 tape blocks
x WebServer/preinstall-webpub, 1218212 bytes, 2380 tape blocks
x WebServer/jre.zip, 12434302 bytes, 24286 tape blocks
x WebServer/search.zip, 9263690 bytes, 18094 tape blocks
x WebServer/snmp.zip, 792631 bytes, 1549 tape blocks
x WebServer/searchdata.zip, 256802 bytes, 502 tape blocks
x WebServer/java.zip, 2989618 bytes, 5840 tape blocks
x WebServer/cleanup.zip, 312 bytes, 1 tape blocks
x WebServer/nescore.zip, 15514015 bytes, 30301 tape blocks
x installWrapper, 6565 bytes, 13 tape blocks
x setup, 2135232 bytes, 4171 tape blocks
x setup.inf, 797 bytes, 2 tape blocks
x template.inf, 714 bytes, 2 tape blocks
Installing iPlanet Web Server, Enterprise Edition
Extracting Java Runtime Environment ...
Extracting Java Support ...
Extracting Search and Indexing Support ...
Extracting SNMP Support ...
Extracting Upgrade Files ...
ld.so.1: /opt/SUNWam/servers/bin/https/bin/install-jc: fatal: libplds4.so: op
en failed: No such file or directory
Killed
ld.so.1: /opt/SUNWam/servers/bin/https/bin/install-java: fatal: libplds4.s
o: open failed: No such file or directory
Killed
ld.so.1: /opt/SUNWam/servers/bin/https/bin/install-webpub: fatal: libplds4
.so: open failed: No such file or directory
Killed
ld.so.1: /opt/SUNWam/servers/bin/https/bin/install-snmp: fatal: libplds4.s
o: open failed: No such file or directory
Killed
sh: /opt/SUNWam/servers/bin/https/bin/install-cleanup: not found
Installation is complete.
See /opt/SUNWam/servers/setup/setup.log for possible errors.
Configuring webserver ... /var/sadm/pkg/SUNWamws/install/postinstall: /opt/SUNWa
m/servers/https-peri.soft-tronik.cz/config: does not exist
pkgadd: ERROR: postinstall script did not complete successfully
Installation of <SUNWamws> failed.Sorry for bothering you!! It was a combination of my stupid (very stupid) mistake and misleading message in error log.
The port I choosed for web server administration was already in use. Thats all. :-E
Michal -
IS 6 Installation issue - web server install fails
Trying to install Identity Server 6.0 on a machine (Solaris 8) with no luck. The web server package (SUNWamws) installation fails about half way thorugh. We're installing as root using JDK 1.3.1_06. This same exact distribution was used to successfully install IS 6 about 10 times over the last month or so. Now we get this..........
Extracting Upgrade Files ...
[0mld.so.1: /usr1/is6/SUNWam/servers/bin/https/bin/install-jc: fatal: libplc4.so: open failed: No such file or directory
Killed
[0m[0mld.so.1: /usr1/is6/SUNWam/servers/bin/https/bin/install-java: fatal: libplc4.so: open failed: No such file or directory
Killed
[0m[0mld.so.1: /usr1/is6/SUNWam/servers/bin/https/bin/install-webpub: fatal: libplc4.so: open failed: No such file or directory
Killed
[0m[0mld.so.1: /usr1/is6/SUNWam/servers/bin/https/bin/install-snmp: fatal: libplc4.so: open failed: No such file or directory
Killed
[0m[0msh: /usr1/is6/SUNWam/servers/bin/https/bin/install-cleanup: not found
[0mSame problem here. Installing on new Solaris 8 machine. Used to work before. That lib appreas to be part of the Mozilla distribution if that's any help.
Donie -
Hello,
please how i can monitoring NSS via SNMP? Now i have latest version of firmware, and in menu i have only SNMP Traps
but i looking for SNMP monitoring like Traffic, CPU load etc, in SNMP Traps i can download MIB file for monitoring but how i can set Community?
regards,
TomasSorry for the very late response, first of all.
There is another post here asking the same basic question; how can you monitor (Install SNMP Agent) on the NSS?
Unfortunately, we can't; at least I have not been able to find a way to do this. The main reason is part of your question; "How can you set the community?", there is no way to do that. All we can do is set the traps, and let our SNMP software catch them. As for looking directly at the CPU load, memory, etc. we..err; should say, I have not been able to do this in my lab. Packet captures do show the information flowing, and traps do work; the bummer part is that we really can't be very pro-active.
I hope someone else sees this post and correct what I am saying. -
Impl.h header and snmp samples are not there
In Solaris9 the fiiles impl.h and the SNMP samples were not there....how can I get them into my system.
ThanksHi Krisjagan,
It’s just been declared Deprecated which means that there won’t be any more updates to this.
It is in fact available as a feature in Server 2012. Pasting some screenshots below from my Lab, you can refer the following related third party article to compare
your install step is same or not, and whether you configure firewall correct.
SNMP Extension Fails on Windows 8/Server 2012 when attempting network communication
https://support.microsoft.com/kb/2771908?wa=wsignin1.0
How to Install SNMP and Configure the Community String
https://support.managed.com/kb/a764/how-to-install-snmp-and-configure-the-community-string.aspx
For detailed information about how you change SNMP to WinRM, you can follow the msdn portal of Windows Remote Management.
http://msdn.microsoft.com/en-us/library/windows/desktop/aa384426(v=vs.85).aspx.
How to check if a SNMP Trap is received.
http://michelkamp.wordpress.com/2012/07/02/how-to-check-if-a-snmp-trap-is-received/
The similar thread:
Windows Server 2008 R2 or Windows Server 2012 SNMP Version Support
https://social.technet.microsoft.com/Forums/windowsserver/en-US/9211da18-cbfb-4adf-84be-43f8654767d1/windows-server-2008-r2-or-windows-server-2012-snmp-version-support?forum=winserverManagement
More information:
Windows Remote Management
http://msdn.microsoft.com/en-us/library/windows/desktop/aa384426(v=vs.85).aspx
I’m glad to be of help to you!
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.
Maybe you are looking for
-
BOE Downloads - Can't See Next Page
When I go to Business Objects > Business Objects Downloads and enter my criteria, if there is more than one page of results, I cannot go to the next page. I click the next page button, but the results disappear. This occurs even if I try to sort or
-
T430s - general observations and USB 3.0 issue
I got my T430s this week after a month. After unpacking I noticed some fingerprints on the lid and also on the display. So I assume the model was reworked, because from the regular manufacturing process I don't expect any fingerprints. However, it ru
-
I have a composition built in AE with one layer of another compsition and 5 text layers that are animated. When I choose File > Export > Adobe Premiere Pro Project... and open it in Premiere, only the other compostion layer is there with no text laye
-
I've read on here that I should export using the Export To Quicktime option if planning to burn to DVD. But Exporting To Quicktime gives a really bad final quality. I get much better quality by using the Quicktime Conversion mode. But, of course, it
-
Windows crashed....can I redownload previous itunes purchases?
My computer OS crashed this week and I lost nearly everything. I have lost my itunes library. Is there any way that I can redownload my previous itunes purchases? I've looked in my account at the itunes store and haven't been able to find information