Install SOA suite on top on an existing working MDM install - Help needed

Hi,
I have a working install with all components on a Windows 2008 server.
Jdeveloper 11gR1
Oracle DB 11gR2
MDM 2.01
OUAF 4.1
Weblogic 10.3
And now I need to install SOA suite 11g. When I did, Jdeveloper stopped working. I was able to revert back to a saved image.
So now that I will start over I was wondering if you know of any special setup conditions I need to pay attention to when I install SOA suite 11g on top of my existing install.
I hate to mess with that working MDM image now since it took me a while to get there.
Any help would be greatly appreciated.
Steve

Sorry for the late reply and thank you for yours.
Here are the versions I use:
Oracle SOA Server version 11.1.1.2.0
Build: 0
Build time: Tue Nov 03 13:48:58 PST 2009
Build type: release
Source tag: PCBPEL_11.1.1.2.0_GENERIC_091103.1205.1216
Oracle BAM Source Tag:ORABAM_11.1.1.2.0_GENERIC_091101.2156
C:\oracle\Oracle_SOA1\OPatch>opatch lsinventory
Invoking OPatch 11.1.0.6.7
Oracle Interim Patch Installer version 11.1.0.6.7
Copyright (c) 2009, Oracle Corporation. All rights reserved.
Oracle Home : C:\oracle\ora112
Central Inventory : C:\Program Files (x86)\Oracle\Inventory
from : n/a
OPatch version : 11.1.0.6.7
OUI version : 11.2.0.1.0
OUI location : C:\oracle\ora112\oui
Log file location : C:\oracle\ora112\cfgtoollogs\opatch\opatch2011-06-25_14-37-03PM.log
Patch history file: C:\oracle\ora112\cfgtoollogs\opatch\opatch_history.txt
Lsinventory Output file location : C:\oracle\ora112\cfgtoollogs\opatch\lsinv\lsinventory2011-06-25_14-37-03PM.txt
Installed Top-level Products (1):
Oracle Database 11g 11.2.0.1.0
There are 1 products installed in this Oracle Home.
There are no Interim patches installed in this Oracle Home.

Similar Messages

WRT54G install HELP needed

I bought the WRT54G so I could go wireless in the house. I run the CD and it goes "do you want to replace your existing router or keep it?" Near as I know I DON'T HAVE ONE but that isn't an option, so which do I pick? There should be a "do you simply have a modem plugged into your PC and bought this go to wireless?" type option (something I'm betting is extremely common). Also, once you select one, you cannot go back and change your mind...you have to exit the program and start over. Which of these cryptic options do I choose??
(Mod note: Edited post for guideline compliance. Thanks!)
Message Edited by JOHNDOE_06 on 06-15-2009 07:12 AM

Disregard - got help from an online tech spt.
FWIW that install CD needs work, as it was detecting a router that doesn't exist and the tech spt explained that sometimes it is known not to work properly.
PS: in the interests of hopefully saving someone else the time and hassle I went thru, here are the steps I was given which worked fine:
1. Connect the PC to the port one of the router then restart it. (This PC should be the one that can get online if directly connected to the modem).
2. Go to your desktop and double click on Internet Explorer or any browser(Located on the Start Menu in Windows XP).
3. When the browser opens, type http://192.168.1.1 on the Address bar and click on Go or press the Enter key. The log-in window will appear.
4. Skip User Name and type admin on the Password field, and click OK.
5. Configure the wireless settings. Click on the Wireless tab and have these:
Wireless Configuration: Manual
Wireless Network Mode: Mixed
Wireless Network Name (SSID): Bill/Anything that you would want to name your network.
Wireless Channel: 1
Wireless SSID Broadcast: Enable
Save the settings.
6. To secure your wireless network, Please click on the Wireless security sub-tab that is still under the Wireless tab and change the Security mode to WEP and have these:
Default Transmit Key: 1
WEP Encryption: 64 bits 10 hex digits
Skip the Passphrase field. Do not click on the "Generate" button.
Enter any 10-digit value in the Key 1 box. (You may use all numbers but you can only use letters A to F. No dashes or slashes and special characters). This will be your WEP key (MINE: ssn123123)
Leave Key boxes 2-4 blank or empty.
Save the settings.
7. Click on the Setup tab, then click on the MAC Address Clone sub tab, enable it and click on "Clone your PC's MAC" then save the settings.
8. On the Setup Tab --> Basic Setup sub-tab, look for the LAN IP which is 192.168.1.1.
9. Change the IP address to 10.10.10.1 then save the settings.
10. Connect the modem to the router's Internet port and wired PCs to the router's numbered ports.
11. Power cycle. To do a power cycle, please power off the computer, the router and then the modem. After 2 minutes, power on the modem, the router and then, lastly, the computers. Wait for the lights to stabilize before plugging the next device.
Message Edited by Bill12344 on 06-16-2009 08:34 AM

Os install help needed

Howdy all, so my buddy just gave me his old power mac g4 that comes with 256MB of ram and running mac os 8.6. I have the mac os9 disc as well as the mac osx Tiger disc but the computer doesn't seem to want to boot either one when i hold down 'c' at startup. When I try installing os9 through the desktop, I get an error message during the os9 install that says "The installer needs to create a folder named 'Desktop Pictures' on the disk but a file with this name already exists. Please rename this file or move it to another folder." I moved the file, and it didn't work still. Can this computer handle mac osx? What's the best way to go about upgrading the os? Thanks a lot guys.
Message was edited by: gsrcivic619

If the OS 9 installer CD & OS X Tiger DVD (gray) are from another model Mac, they won't work on the PM G4. You need retail installers.
256MB RAM is the bare minimum for Tiger. It will run very slow.
You need to check if your Mac requires a firmware (Boot ROM version in System Profiler) update. Mac OS X: Available firmware updates
http://docs.info.apple.com/article.html?artnum=86117 If an update is required, the update must be installed (using OS 9) BEFORE you install OS X.
 Cheers, Tom

Just installed help needed

Hello-
I just installed Creative Cloud and its now on my mac computer and the icon is up top on the bar (near my battery percentage, etc) When I click on it to start, under the home and apps tab, there just a spinning wheel of death. Is it my internet or ?
Thanks!

HI Kait910,
Close the Creative Cloud application if it's running.
    Navigate to the OOBE folder.
    Mac OS: /User/<username>/Library/Application Support/Adobe/OOBE folder
    Rename the opm.db file to opm_old.db
    Launch Creative Cloud and check.
Thanks

Need to reinstall Acrobat XI - cloud says it's installed - help needed urgently!

i am using osx / adobe creative cloud.
needed to deinstall acrobat XI. did it with app cleaner by mistake.
now acc tells me it is installed and i can not reinstall it again.
help urgently needed!
PROBLEM SOLVED
go to applications/utilities/adobe installers/acrobat XI deinstall (in my case)

Hi rbt_11,
Please go to
Applications --> Utilities --> Adobe Installers and check if you have any uninstaller for Acrobat XI.
Incase if you find the uninstaller then run that and uninstall the remnants of this software.
Thanks
Kapil

Planning - Workspace install help needed

I am newbie in Planning. I had a problem accessing Workspace..
I had installed and configured the Products in the following order
1) Shared Services
2) Essbase Client
3) Essbase Server
4) AAS
5) Planning
6) Reporting and Analysis. i think i installed client services
http://localhost:8300/hyperionplanning/
http://localhost:8300/hyperionplanning/appwizard.jsp
http://localhost:19091/awb/
Both are working fine
When i am not able to load either
http://localhost:19000/workspace/
or
http://localhost:19000/workspace/config
I have been working with planning using EPMA.
I know for that i need to install WorkSpace..But i did not find workspace @ Edelivery..I am jst able to see Some Flat files with name WorkForce..
I downloaded Hyperion Planning - System 9 Release 9.3.1 Microsoft Windows x86 Installer English and installed it for planning..
So can some one please help me how to install workspace..Or do i need to configure to get it running on my machine.
Or which file do i need to download to get workspace.
Thanks in advance..

hi dude ... i think even i have gone throuugh the same ..... c while installing the UI serviese make sure tht u deply apachi tomcat http server to all .. ie planning workspace etc which u can while confugrating the UI servies ..... better take care of confurating .....
For this first of all down wht MR hyperion guru Snadeep reddy said thoses 2 files and while confuration on UI servies pls do take care .

Fresh Install Help Needed

I have worked with SunONE Directory Servers all the way back to verson 3. However, I am having a very hard time getting this new version to work.
I am attempting to install it in a Solaris 10 Full Local Zone, but I am having no success.
After running the native Solaris 10 install using the command: ./installer.sh
Everything seemed to install correctly.
I then ran the dsccsetup initialize command as noted in the documentation. It noted that the agents were already registered and asked me to enter the manager password, which I did.
I then ran the dsccsetup status command as recommended. It noted that the agents were already registered and allowed me to enter a password.
# ./dsccsetup status
DSCC Application is registered in Sun Java (TM) Web Console
DSCC Agent is registered in Cacao
Cacao is down. Start it using:
/usr/sbin/cacaoadm start
DSCC Registry has been created
Path of DSCC registry is /var/opt/SUNWdsee/dscc6/dcc/ads
Port of DSCC registry is 3998
Here is where the problems started occuring...
When I tried to start the CACAO, I get the following message:
# /usr/sbin/cacaoadm start
Error when trying to start SMF service: [svc:/application/management/common-agent-container-1:default].
When I tried to start the webserver service, I get the following message:
# /usr/sbin/smcwebserver start
Starting Sun Java(TM) Web Console Version 3.0.2 ...
svcprop: Couldn't find property `restarter/logfile' for instance `svc:/system/webconsole:console'.
Cannot determine if console service is running.
Check log file:
Run "svcs system/webconsole:console" to determine its status.
Any assistance that can be provided to point me in the correct direction is appreciated.

You seem to have a pb with SMF.
I would check the SMF logs for more details on the real issue.
Regards,
Ludovic.

How to assign new vendor to existing wage type - urgent help needed!!

Hi SAP Gurus,
I have a query for south African payroll-
I want to assign an exiSting wage type (<b>i.e Transport 1234)</b> to <b>new vendor (600139)</b>The above wage type is aleady assigned to old vendor (600136)
Hence from 1st June2007 onwards, the wage type will be assingned to new vendor, hence where we assign this wage type to new vendor?
I have already done some changes in (IMG--SA payroll Reporting for Posting Payroll Results to AccountingActivities in the AC-SystemAssigning AccountsAssign Vendor Accounts , where I have assigned symbolic a/c to new vendor)
Also, I have copied the wage type, Transport with new validity i.e 1st June2007.(IMG-SA payroll Activities in the HR-SystemMaintaining Wage Types--Define Posting Characteristics of Wage Types)
Hence, I wanted to Know, how the wage type will post new vendor form 1st June 07?? is there any other way to addign the wagtype to new vendor??
Hence, required your valuable inputs for same.......... )
Points will be rewarded for same
Tnkx & regds,
Nithibabu

Yes ,
Assigning WT to new vendor through that i explain.
just assign you WT to Symbolic account and further link will get created.
Each employee is having its own vendor account if you don't have that then its very difficult to understand where the amount is going
so when you make a payment to employee that payment is go and seat in to his/her vendor account so for that purpose you have to assign the employee id to employee vendor, so if you don't have relation between employee and vendor how you come to know that for which vendor the amount is paid.
so for this purpose we need to assign the employee id to vendor.
in SAP employee is treat as vendor and customer also.
This setting is done by FI consultant.
ask your FI consultant he will do for you.
Vicky

Driver uninstall/install help neede

Hi. I need some help with drivers. I have a SB Audigy 2 ZS, and I'm updating my drivers to the latest version, .85.55(thats what it says on the desktop icon) and EAX 4.0 Advanced HD. I have driver cleaner to clean up any remaning parts of the old drivers, and I know I need to install the EAX driver first.
But i don't know if I need to uninstall the EAX console I see in the modify menu for creative in Add/remove programs. It says I need to uninstall EAX 4.0 if I want to install new drivers, so do I need to uninstall this version of EAX? or do I just uninstall the windows drivers(the drivers for the sound card, I assume) that are listed in the menu and then install EAX 4.0 and then the new drivers?
Please be as detailed as you can be. Thanks very much.Message Edited by Hillbilly_37 on 07-3-2005 0:7 PM

Is the card a retail version, if it is not you cannot update from this site. If its a Dell PC its not a retail version.

Oc4j standalone 10.1.3.3 and service registry with ssl install help needed

Hello,
I'm trying to install service registry with oc4j standalone for testing and demoing but am having some difficulty with the ssl side of things.
I have setup a oc4j standalone 10.1.3.3 and configured the following ports:
default http port: 9991
ormi port: 9992
ormi ssl port: 9993
https port: 9994
I have configured oc4j standalone for SSl as per instructions by copying default-web-site.xml to secure-web-site.xml and added secure="true" to <web-site> tag and added <ssl-config keystore..../> as well. I've also modified server .xml and added <web-site path="./secure-web-site.xml" /> into the file.
I have then installed service registry as a publication (discovery) with http port pointing to 9991 and ssl enabled pointing to 9994 with oracle database.
I can load http://localhost:9991/ and also https://localhost:9994 and both secure and non-secure page loads fine for the oc4j webpage. I can load http://localhost:9991/registry/uddi/web/ page but when I click on any of the link on it tries to load https://localhost:9994/registry/uddi/web i get a http 404 not found error.
Tried googling and searching the forum for info, but I'm in need of a little help on where I went wrong.
Thanks

Hy frank, thanks for your reply:
We use a jdk shipped with jdeveloper for running OC4J;
"<JDev install dir>\jdk\bin\java.exe"
java -version says:
java version "1.5.0_06"
Java(TM) 2 Runtime Environment, Standard Edition (build 1.5.0_06-b05)
Java HotSpot(TM) Client VM (build 1.5.0_06-b05, mixed mode)
Regards.
Davide

MOSXSWebPassword install help needed

I installed an older version of this software on my Panther server several years ago and got it to work, but I can't remember exactly how I did it.
I'm currently trying to get the latest version (1.5L) working on my 10.5.5 OD Master. I know it's running and working since if I call it directly the page shows up but I think there is some problem with it somewhere.
http://www.technospider.com:2001/cgi-bin/WebObjects/MOSXSWebPassword.woa <-- This works but isn't secure since it's not running through SSL.
<a class="jive-link-external-small" href="https://">https://secure.technospider.com/cgi-bin/WebObjects/password <-- This is what I want, as secure.technospider.com is my SSL enabled site and it's the URL that I've specified in the Monitor webpage. When I attempt to go to this URL I just get an error that the server dropped the connection.
Any help on where to look to resolve this issue would be appreciated.
Thanks,
David

I found the same problem recently. The cause was that someone was trying to exploit a security vulnerability in Kerberos. If your /var/db/krb5kdc directory has extraneous files that begin with the name "kerberos", it is likely your server has been compromised. It is also likely that restoring the lock file will only be a temporary fix, since the server will likely be unstable because of corruption or continue to be compromised like mine was.
I am still trying to recover my server into a stable state.

JRE install help needed with linux newbie

I recently tried installing the latest JRE for Linux AMD64, following all the guidelines listed in the install instructions. However, as I am completely new to the world of Linux, I don't know if anything needs to be done beyond the install guide in order to have the JRE up and running. I have tried setting up Open Office 2 to recognise the new JRE, but have had no luck. I don't know if this is a case of me not knowing the correct directory to give in Open Office, or whether I have missed something in the Install/Configuration.
In case you need to know, the installation unpacked to "/usr/java/jre1.5.0_06"
Thank you,
Scott Christopher

You will find the solution in your Linux forum. Depending on what distribution you have, e.g. here for Debian based Ubuntu:
https://wiki.ubuntu.com/RestrictedFormats?action=show&redirect=AddingJavaSupport#head-68565ae07a003332e82c9f23706638777396c249

Ubuntu install help needed!!!!

i have ubuntu 6.06 dapper for my clamshell ibook. it is a live/install cd and i want to boot it and try it but it doesnt work. i have been waitng so long! i have os 9.2.2 installed. is ther any possibility of firmware being outdated? i don't know wich one i have. ubuntu livecd loads until its time to show the gui and it stays black on the screen.it makes two sounds and stops. if i press option command delte, then it takes me to the previous step( a list of things that loaded and the current step) then it goes on again doing nothing. if i cant try it out, how would it work installing 2 gigs worth with no gaurantee i like it? please help!!!! i want new software!

A swap partition is where Linux keeps its virtual memory. During the install process you should be asked to create a swap partition. You should make your swap partition 256MB. If you do not have enough memory to boot a GUI to install, you can boot the installer in text mode. When you are at the black yaboot screen type "help" and it will tell you what to type to boot the installer in text mode.
If you are planning on having dual boot with mac, you should boot the mac install cd first, partition the hard drive, and install mac. Leave one partition as free space for linux. I left half my drive for mac, and the other half for linux.
When you get to the partitioner, make all of your linux partitions from the free space. My advice is to create the yaboot partition first, that is a 800KB partition that allows linux to boot. Then create a swap partition, which should be 256MB or more. Finally make the rest of the free space a linux partition. It is important to remember what partition yaboot, swap, and linux are on because you will be prompted for them later. To refer to a partition, say the 5th partition it is /dev/hda5. That means the 5th partition on the first HD.
Hope this helps, and sorry for writing an essay :~)
iBook G4 14" 1.42 GHz 60GB 768MB 10.4.7 - Blueberry Clamshell 300MHz 20GB 320MB Preforma 630CD, LCIII, Compaq laptop 266MHz 5GB 192MB (GNU/Linux, NOT windoze)

Panther install help needed

I'm trying to install Panther on a blue & white iBook. The ibook's current OS is 10.0. I have the retail CDs (in the black box). When I insert into the cd drive, the ibook reads them and allows me to click on the install OS X icon. WHen I do so, it prompts me for a restart. I click the button and the system restarts, but doesn't begin the install process. It brings me to the desktop and opens a window where I can click on the installer and start the loop again.
What's the deal? Any suggestions as to what I'm doing wrong?
Thanks!
Bryan

Try this:
Booting From An OS X Installer Disc
1. Insert OS X Installer Disc into the optical drive.
2. Restart the computer.
3. Immediately after the chime press and hold down the "C" key.
4. Release the key when the spinning gear below the dark gray Apple logo appears.
5. Wait for installer to finish loading.

Flash Player install help needed; no sound.

I have installed Flash Player 3 times -- followed instructions - checked volume controls - but still no sound; only have video. It is the latest version. Help would be much appreciated.

Thank you for the guidance for what added info is needed to help solve these kinds of problems. I'm a first-time user of tech forums. I do believe I solved my problem by unistalling a previous version of Flash Player. I finally did get sound. Much appreciate. Bill

Install SOA suite on top on an existing working MDM install - Help needed

Similar Messages

Maybe you are looking for