Install software and drivers

When i have programmed my software in VB and i whant to
install the DAQcard on another pc together with my software, do i have to install and use "NI-Daq traditional" again to install drivers on that pc and to setup the DAQcard?
Thanks...
Martijn

Yes, the NI-DAQ driver is not "included" in the software you develop. On a clean target pc you have to install the NI-DAQ driver again to let the DAQCard function as it should do.
Regards,
Rik P.
Application Engineering
National Instruments
Rik Prins, CLD
Applications Engineering Specialist Northern Europe, National Instruments
Please tip your answer providers with kudos.
Any attached Code is provided As Is. It has not been tested or validated as a product, for use in a deployed application or system,
or for use in hazardous environments. You assume all risks for use of the Code and use of the Code is subject
to the Sample Code License Terms which can be found at: http://ni.com/samplecodelicense

Similar Messages

OfficeJet Pro 8500 A909a - trouble installing software and drivers

I am trying to re-install my Software and Drivers for OfficeJet Pro 8500 A909a. My operating system is Windows 7. I get an error message every time. "Runtime Error! This application has requested the Runtime to termnated it in an unusual way. Please contact the application's support team for more information."

I Am havig the same problen with windiws 7 home premium It must be HP is the problem ahorsell

Printer CD will not install software and drivers

Laptop: Acer Aspire 3690 series
Model: BL50
OS: Windows Vista SP2 Home Basic (32 bit)
Printer: HP Desktop F4100 series
*To my knowledge both laptop and printer are old models, with the laptop being as old as 7 years.
Short Story: After formatting my laptop and reinstalling the OS, the CD won't install the drivers from the disc so the printer would work correctly on my computer. It always results in an error.
Long Story: My Windows Vista laptop had an issue. There was a problem with the OS that kept mysteriously eating up space of the computer hard drive. It was so bad that the computer kept reporting it had 0 bytes of free space left on the hard drive. I always had to find free up space somehow because the printer won't print without free space. I couldn't even use my superiorly better computer because the printer only works with Windows 2000, XP and Vista, it doesn't work with Windows 7 (I tried). One day I decided I had enough of it and reinstalled the OS of the laptop. I used DriverMax and exported all of the drivers from my laptop to my flash drive since I don't remember my laptop coming with a driver disc. Everything went smooth and my laptop was operating like new except for one issue: No matter how many times I tried, I could not install the printer drivers from the printer disc onto the computer.
When the disc is installing the drivers and software, this would show:
and then this error:
I wasn't sure if I there was a model number on the printer or not but here is a photo of it:
Getting help from the HP Support forum seems to be my only option so hopefully I can find a solution here. Thank you to anyone in advance who can help me resolve this I would really like to get this fix as I not too long ago bought several cartridges for this printer to last a while, and there's not much money to buy a printer OR another computer.
This question was solved.
View Solution.

Greg-HP
Welcome to the HP Community Forum.
The printer software for your OS may be available for download from the printer's Support pages.
Install Full Feature Software – Printer
Should it be available, be sure you do save a copy of the software, the manuals, and whatever else you find that you find of interest. One never knows when these vintage items might disappear. Smiling.
Click the Kudos Thumbs-Up to show you appreciate the help.
Click Accept as Solution when the Answer provides a Fix or Workaround!
I am pleased to provide assistance on behalf of HP. I do not work for HP.
Kind Regards,
Dragon-Fur

C6180 All In One Photosmart. Software and drivers will not install on Windows 8.

C6180 All In One Photosmart
on
Windows 8 64bit
Acer Aspire V5-552PG
AMD A10- 5757M
Radeon HD 8750M dedicated
Software and drivers package will only unpack but not install.
When the unpacking bar reaches the end, it disapears without any following actions.
I have of course tried it over again many times, and I have deleted the download and redownloaded it again but the same happens every time.
Any idea on how to solve this?
Sincerly
FLFO

HI FLFO:
I have done some research on your post. I have found a document with steps to help resolve the stall you're experiencing during your printer installation.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00836418&tmp_task=solveCategory&cc=us&dlc=en&lc...
Happytohelp01
Regards,
Happytohelp01
Please click on the Thumbs Up on the right to say “Thanks” for helping!
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
I work on behalf of HP

Software and drivers for Audigy 2 Plati

Hello
I'm reinstalling my audio card and the installation disc has become damaged (scratch)
I went to the downloads area and got confused by all the updates and patches
where do I go to get the basic software and drivers that are the basis of what is getting updated and patched?
Thank you
nic

I'm in the same boat. (but have the Platinum 2 EX) I switched computers and can't find my driver installation disk.
I thought I figured out which was the correct one on the site, but when I attempted to install the latest drivers from the board, it said that is couldn't find the hardware or software necessary... something like that.
For what it's worth, the 2nd to last driver updates did seem to install without problems though; so, you may want to try that one.
At the moment, I'm only getting sound from my front 2 speakers, but this may be because I need the additional Creative software to get the CMSS working and adjust the surround balance.
Has anyone received the message I mentioned when trying to install the latest drivers?
thx

HP deskjet F4440 all in one software and drivers

I can not seem to find the software and drivers for this product
This question was solved.
View Solution.

Hi,
The HP Deskjet F4440 is part of the F4400 Series, this is the correct driver for your printer.
What do you mean by it would not work?
What specific beavior or error message do you see while trying to install it?
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Software and drivers for media smart server EX 475 win 8.1

Had to replace my laptop and is now running win 8.1 (64 bit). I need software and drivers for my mediasmart server EX 475 (GG 795 AA)

I'd say go with Middleton BIOS either way (SATA II). In which case, get a newfangled 802.11ac card while you're at it.

Is there way to install OS and drivers without recovery CD?

Hi...
I installed my notebook with the recovery cd...
but i get disappointed because it installed a lot of unusual programs...like aol, sonic-pro, games...
is that a way to install windows and drivers only ?? without this boring programs ???
i don't want to uninstall after instalation...it's not the same thing...

Hi
I cant understand user who bye a high performance notebook with many different features and then will not use this functions. Of course, on the Toshiba recovery CD you will find the OS and all Toshiba drivers and utilities. Without this drivers and tools and utilities you will be not able to use the additional Toshiba functions.
But as in the previous posting mentioned you can install the fresh Windows OS and then you can install the drivers. But the easiest way is to use the Tosh recovery CD and then if you want you can remove some applications.

I'm trying to connect my Kodak ESP c310 to my Mac mini but it's not coming up in my default printers menu and everything else is working. Their on the same network, software and drivers up to date, but can't get it to connect.

I'm trying to connect my Kodak ESP c310 to my Mac mini but it's not coming up in my default printers menu and everything else is working. Their on the same network, software and drivers up to date, but can't get it to connect.

You can purchase recovery disks from HP. Here is a webpage showing you how to do that:
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=bph07143
If HP no longer supplies your specific recovery disk, you can usually find one from a 3rd party site, such as www.restoredisks.com for between $20 and $30.

HT5304 Hi Guys, I'm running snow leopard 10.6.3 recently had update which left me with a DMSL launch problem. Rei installed software and now can't connect to Internet with cable or wifi ! can see network and router,. Help

Hi Guys, I'm running snow leopard 10.6.3 recently had update which left me with a DMSL launch problem. Re installed software and now can't connect to Internet with cable or wifi ! can see network and router. Have tried many things and now pulling my hair out !

recently had update
Care to share which update?
Have tried many things
Care to share?
Please detail ALL you have done so far in the way of troubleshooting? Need this info to avoid the been there done that scenarios.

I am trying to install software and am getting the following prompt.Installation Failed, the installer cant create the folder "var/folders/sq/2fzf3s_d2bzb21159nbwkb2r0000gn/T//install.3732dq0ogT. How do I repair this

I am trying to install software and am getting the following prompt.
"Installation Failed, the installer cant create the folder "var/folders/sq/2fzf3s_d2bzb21159nbwkb2r0000gn/T//install.3732dq0ogT.
How do I repair this

Back up all data. Don't continue unless you're sure you can restore from a backup, even if you're unable to log in.
This procedure will unlock all your user files (not system files) and reset their ownership and access-control lists to the default. If you've set special values for those attributes on any of your files, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it.
Step 1
If you have more than one user account, and the one in question is not an administrator account, then temporarily promote it to administrator status in the Users & Groups preference pane. To do that, unlock the preference pane using the credentials of an administrator, check the box marked Allow user to administer this computer, then reboot. You can demote the problem account back to standard status when this step has been completed.
Triple-click the following line on this page to select it. Copy the selected text to the Clipboard (command-C):
{ sudo chflags -R nouchg,nouappnd ~ $TMPDIR.. ; sudo chown -R $UID:staff ~ $_ ; sudo chmod -R u+rwX ~ $_ ; chmod -R -N ~ $_ ; } 2> /dev/null
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window (command-V). You'll be prompted for your login password. Nothing will be displayed when you type it. You may get a one-time warning to be careful. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
The command will take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear, then quit Terminal.
Step 2 (optional)
Take this step only if you have trouble with Step 1 or if it doesn't solve the problem.
Boot into Recovery. When the OS X Utilities screen appears, select
Utilities ▹ Terminal
from the menu bar. A Terminal window will open.
In the Terminal window, type this:
res
Press the tab key. The partial command you typed will automatically be completed to this:
resetpassword
Press return. A Reset Password window will open. You’re not going to reset a password.
Select your boot volume ("Macintosh HD," unless you gave it a different name) if not already selected.
Select your username from the menu labeled Select the user account if not already selected.
Under Reset Home Directory Permissions and ACLs, click the Reset button.
Select
 ▹ Restart
from the menu bar.

Software and Drivers for an HP Scanjet 5590 with a 64 bit Windows 7 computer.

I thought that I had posted the following question but as I can't find it I will try again. I have been given a HP Scanjet 5590 scanner with no Software or Drivers for 64 bit Windows 7 computer and looking through the Web I saw some awful comments on the experiences of those using the software and drivers. I don’t want to make the same mistake so could anyone tell me how to go about obtain the correct software and drivers?

Corporal,
Here is the link for the software...
If you have the "p" model, backtrack a the link and reselect the proper model.
You want the "Full Feature" software.
Note that the download size is 315MB - plan accordingly if you have a slow connection...
While you are there, be sure to download the Print Doctor utiltity. (Do that first, it is tiny.) This may help later with installation and connection issues, if needed.)
HP Scanjet 5590 Digital Flatbed Scanner series - Software and Drivers
I hope this helps...
   Click the White Kudos Star on the Left to give Kudos for the help.
       Please Click “Accept as Solution” to say issue is solved.
Always Include: (Computer) Product Number , Printer – Model Number ,
                             Never give out your Serial Number
                              2012 Year of the Dragon!
Kind Regards,
Dragon-Fur

HP Pavilion DV6-6c00tu Software And Drivers Required

Hi everyone !!
Guys i need your help... please help me and guide me ..
i need hp pavilion dv6-6c00tu all softwares and drivers ..up to dated
Required some Software and Driver Applications for Hp pavilion dv6-6c00tu... Windows-7 Professional 64-Bit
1-HP Simplepass 2012 64-bit windows updated driver (Windows 7 Professional)
2-HP Techcenter Startup for download "
3-HP CoolSense Software "
4-HP Pavilion dv6-6c00tu Intel Chipset Installation Utility and Driver 9.2.0.1030 for Windows 7: Professional
5-HP Pavilion dv6-6c00tu IDT High-Definition (HD) Audio Driver 6.10.6345.0 for Windows 7: Professional
6-HP Pavilion dv6-6c00tu Intel Management Engine Interface (MEI) Driver 7.0.0.1144 for Windows 7 Professional
7-HP Pavilion dv6-6c00tu AMD High-Definition Graphics Driver 8.882.2.3000 for Windows 7: Professional
8-HP Pavilion dv6-6c00tu Intel High-Definition (HD) Graphics Driver 8.15.10.2476 for Windows 7 Professional
9-HP Pavilion dv6-6c00tu Intel Wireless Drivers, Intel PROSet, and Intel My WiFi for Windows 7: Professional
10-HP Pavilion dv6-6c00tu Ralink 2011 802.11 b/g/n WiFi Adapter 3.2.7.0 for Windows 7 rofessional
11-HP Pavilion dv6-6c00tu Realtek Local Area Network (LAN) Driver 7.41.216.2011 for Windows 7 rofessional
12-HP Pavilion dv6-6c00tu Essential System Updates 4.00 for Windows 7 rofessional
13-HP Pavilion dv6-6c00tu Intel Wireless Display Software 3.0.13.0 for Windows 7 rofessional
14-HP Pavilion dv6-6c00tu Movie Store powered by RoxioNow Application 210B96A for Windows 7 rofessional
15-HP Pavilion dv6-6c00tu Application Assistant Software 1.1.466.3970 for Windows 7 rofessional
Hp power manager is not working
Hp coolsense is not working
Hp Techcenter startup software/driver required
Hp Pavilion Dv6-6c00tu all HP games
Guys i am waiting your reply.. please prompt quick.
Thanks!!

Try downloading the HP Support Assistant and running it. It should be able to detect any missing drivers for you.
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

Do i loose all the installed software and files when upgrading to mountain lion from 10.6.8

Hi, do i loose all the installed software and personal files when upgrading to mountain lion from 10.6.8 ? Thx..

Thanks ..

Need 64-bit software and drivers

Can someone please help me locate the software and drivers for my printer. The CD that came with the printer does not have drivers for Windows 7 64-bit operating system.

Hi , Welcome to the HP Forums! I understand that you are looking for drivers for Windows 7 (64-bit) for your HP Photosmart P1000 printer. I am happy to take a look for you! According to the HP Photosmart p1000/1000 Printer Drivers website, The newest driver available for this printer is for Windows XP 32 bit. The system requirements for this printer also specify only these Windows Operating Systems: Microsoft (R) Windows 95, 98, Me, NT 4.0, 2000 Professional, XP. You might be able to use the Windows XP driver in compatibility mode. Or, as another workaround, you might be able to use an alternate driver, by going to this post, How to Assign Alternate Print Drivers in Different Versions of Windows, by . (These methods are not guaranteed to work.) If they do not help, I would consider upgrading your printer to one that is supported for Windows 7. Printers Supported in Windows 7. As this printer is not officially supported. Hope this answers your question, and thank you for posting! “Please click the Thumbs up icon below to thank me for responding.”

Install software and drivers

Similar Messages

Maybe you are looking for