Install software for Deskjet 2540 will not load on Windows XP Home edition SP3 machine

I have successfully connected a new Deskjet 2540 printer to a Windows 7 machine, and IPAD Air, and an XP Pro laptop.
I cannot get the install software to load on and XP Home edition SP3 machine. I have tried all of the HP remedies that I can find, over  period of two days, but the installation fails every time with the message "Installation failed. The software required for your printer could not be installed".
What can be done?  

Hi,
Thanks  for  your second installment of help suggestions.
I started check disk as you proposed and it ran happily for some hours with evidence of progress. However eventually I found the computer stopped with a number of suggestions for restarting. I tried all of these and some others, but got no further than the first Windows picture. At this point the machine restarts, and goes through the same process. 
The printer problem, as you can see has unfortunately become secondary to trying to recover the system.
What I propose is to  try to read the disc in question on another computer, and extract the important data files to a safe place. Then to return the disc to its own machine and use the recovery CD, to try to get the machine to recover with the minimum of loss. If this succeeds, I might even find that the printer software then loads without problem. There is a big IF there, and I won't hold my breath.
None of this relates to the printer problem, and fortunately i have three other devices running which are happily connected to the printer.
I just wnted to explain why there will be no further feedback for a while. I will take my time with the recovery process.
Thanks for all of your help. I have just been unlucky.
Regards

Similar Messages

  • After downloading and installing software for AirPortExtreme, Skype will not open.

    After downloading and installing new software for AirPort Extreme from the Appstore, Skype will not open.

    Did you repair permissions and restarted your computer after the installation? 
    Skype has their own forums for Mac users.  You should post there if the above does not work. 

  • Install Disk for Snow Leopard will not boot on an iMac 27in

    My Install Disk for Snow Leopard will not boot on my iMac 27in. The Apple Logo is the only thing the user will see. The current OS on the system is 10.6.6. Upon placing the Snow Leopard DVD in the system, the DVD players spins for a few seconds and displays the Apple Logo. Nothing happens after 20 minutes.

    Yes, it is ridiculous how it is impossible to install Snow Leopard. I have two Snow Leopard DVDs: one that I purchased for a Macbook soon after it's release (10.6.0), and one that came with my iMac (10.6.4). Both of these boot up my Macbook (running 10.6.7) just fine. My SL 10.6.0 DVD mounts onto my iMac (Lion 10.7.0), but you cannot run the install. I attempted to boot from this DVD and got the infinite white screen and Apple logo, as some have reported above. The other SL 10.6.4 DVD will not even mount in Lion, and will not even show up as a bootable drive when I attempt to select it after holding alt/option on reboot.
    I created a bootable external drive from SL 10.6.0, attempted boot, same infinite white screen/apple logo.
    I created a bootable external drive from SL 10.6.4 on my macbook. I attempted to boot from this drive, and got the white screen of death, except that this time I actually got the loading symbol underneath the Apple logo. After about a minute of attempting to boot, the Apple logo changed to a circle with a diagonal line through it (the "NO!" sign).
    I took my iMac to the genius bar. They inserted SL 10.6.0, which would not boot. Then they determined that my computer had to run 10.6.4 and later. So, they restored an image of SL 10.6.4 onto my partition (not an install from an image, but an image of SL already installed). Hurray! Snow Leopard was successfully shoved onto my iMac!
    I then deleted a third partition on my hard drive I did not need anymore, which somehow screwed up my SL partition (even though it said "Will not erase partition SL or Macintosh HD). Now I am back at square one, and I guess I need to take my flippin iMac back to Apple for them to do what I should be able to do.
    I like Apple, but sheesh do I hate Lion right now.

  • Removed working Firefox 7, Installed Firefox 10.0, Firefox will not load. When I click on icon, firefox.exe process shows briefly in task manager, then goes away....no errors, nothing

    Removed working Firefox 7, Installed Firefox 10.0, Firefox will not load. When I click on icon, firefox.exe process shows briefly in task manager, then goes away....no errors, nothing. Never see browser panel at all. Also tried to install Firefox 9.0, but the same result was observed.

    Rather difficult to say what the problem may be at present but for general info please have a look at
    * [[safe mode]]
    *[[firefox will not start]]
    *[[firefox hangs]]
    Note sometimes you may have to wait a while for firefox to shutdown completly, and if it has hung then as explained in the above articles you may need to kill any firefox.exe process that is still running (and maybe plugincontainer.exe)
    Try starting firefox in [[safe mode]] e.g. by holding down shift key
    * do not make any changes in the first window, just click on continue<br/> ? Do you get as far as seeing the options window for safe mode ?
    If firefox is crashing see [[firefox crashes]], this is easier to work through if you can get firefox to start without crashing on startup. Currently some firefox users are finding Firefox 10 crashes on startup, and a new version Firefox 10.0.1 is being released very soon to deal with this and another cause of hangs.
    Not saying any of this applies to your case but recent issues include
    * ask tool bar causing hangs if video is used none English versions [/forums/contributors/708073]
    * possibly some crashes do not start the crash reporter and other issues [/forums/contributors/708122?page=2#post-45059]
    * some general info about current crashes [/questions/917748#answer-308124]

  • Organizer will not load in Windows 8

    Organizer will not load in Windows 8 directly.  If Editor is opened first Organizer will load photos but THEN converts them to hourglasses.  Hourglasses will open if double clicked.  I have no idea what is going on.

    Do you have any other suggestions?  FYI - this same software is installed on a desktop computer and I do not have this problem.  When I click on "Organizer", it goes into it.  The desktop is windows XP and the laptop is windows 7.  When I first installed this on the laptop it worked fine.  I downloaded all my pictures to photoshop.com, and started to have problems after that.  I keep getting a message that my online storage is full, but I do not want to add more. Do you think my problem would be solved if I delete my photoshop.com account?  Would this affect any of my pictures or albums on my computer?

  • Itunes 10 will not load on windows 7 64 bit. Error code 2324. Old Itunes is gone or not working. Cannot play anything although files are still there. What the ??? is error 2324. Seems like alot of people ar ehaving the same problem

    Itunes 10 will not load on windows 7 64 bit. Error code 2324. Old Itunes is gone or not working. Cannot play anything although files are still there. What the ??? is error 2324. Seems like alot of people ar ehaving the same problem

    I have had this problem with Windows 7 and iTunes updates for some time. Each time it takes hours to solve but with the over the air upgrade to IOS6 on my iPhone and iPad, I was determined to solve and remember what I did, So here it is:
    http://www.care4pcs.co.uk/2012/09/pear-shaped-apple-ios-6-for-iphone-ipad.html
    I hope this helps you and any other users.

  • Since installing the latest update, Firefox will not load; it gives me the following error -- XML Parsing Error: not well formed.

    since installing the latest update, Firefox first operated with some errors but now will not load at all; it gives me the following error --
    XML Parsing Error: not well formed
    locations chrome://browser/content/browser.xml
    Line Number 1191, column 20:
    utton id="back-forward-dropmarker" type="menu" chromedir="&locale.dir;"-------------------
    please note that the words "utton ID" are exactly as the error message gives it; and at the end of the message there are exactly 19 hyphens.
    I don't know why this faulty code is referencing things to do with "chrome"... the Chrome browser is not installed on this PC or anywhere on our network.
    Also, this is not the first problem I had after clicking Firefox's prompt for the latest update. Before Firefox retreated into this error message, it was loading but running with some faults...
    1. the bookmark symbol was not appearing on the right hand side of the URL line, so I had always to click on "bookmark this page", after which the bookmark symbol did appear; however I don't know if the bookmarking function worked properly.
    2. the back and forward buttons were not highlighted, as if I had not come from a previous page; so once I clicked on a link to a new page I could not go back to where I came from because Fiefox thought I hadn't come from anywhere.
    3. there may have been other errors, but I did not find them.
    How do I reinstate my Firefox program to work properly please? do I have to download the latest version and reinstal? if so, do I have to remove the old version first? or is there a fix?
    Even to write this message I have been forced to use (yuk -- I don't like to say this!!!) Internet Explorer. So please -- I need help urgently.
    Thanks,
    NOEL

    Some how I solved my problem by opening a user account and downloading Firefox 4.0 beta and installing it, I did try it, worked fine, so I did close the user account and did go back to my own account(switched user), the main page that I had problem with Firefox which would not open, I dabble click on Firefox it start working again!! I hope that solves your problem too.
    firefox will not open, it gives me this cod and would not turn off, Error on switching in renew: NS_ERROR_UNEXPECTED, Component returned failure code: 0x8000ffff (NS_ERROR_UNEXPECTED) [nsIPrefBranch.getCharPref] id: none

  • Mac for office 2011 will not load

    Mac fo ruff ice 2011 will not load?

    On an iPad (or any iOS device), not it won't. It is for Windows or Mac OS  X only.

  • SQL Express 2008 R2 will not start on Windows 7 Home

    Ok, This used to work, and then over night my system rebooted and now I cannot start SQL Express 2008 R2 after I have unistalled, and re-installed.   Cleared out the folders and the certificates, changed the Named Pipes configuration and all to
    no avail.   Here is my log file.
    -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
    2014-06-14 08:45:18.18 Server      Microsoft SQL Server 2008 R2 (SP1) - 10.50.2500.0 (X64)
        Jun 17 2011 00:54:03
        Copyright (c) Microsoft Corporation
        Express Edition (64-bit) on Windows NT 6.1 <X64> (Build 7601: Service Pack 1)
    2014-06-14 08:45:18.18 Server      (c) Microsoft Corporation.
    2014-06-14 08:45:18.18 Server      All rights reserved.
    2014-06-14 08:45:18.18 Server      Server process ID is 8924.
    2014-06-14 08:45:18.18 Server      System Manufacturer: 'SAMSUNG ELECTRONICS CO., LTD.', System Model: '700Z3A/700Z4A/700Z5A/700Z5B'.
    2014-06-14 08:45:18.18 Server      Authentication mode is MIXED.
    2014-06-14 08:45:18.18 Server      Logging SQL Server messages in file 'C:\Program Files\Microsoft SQL Server\MSSQL10_50.ACT7\MSSQL\Log\ERRORLOG'.
    2014-06-14 08:45:18.18 Server      This instance of SQL Server last reported using a process ID of 2820 at 6/14/2014 8:32:55 AM (local) 6/14/2014 1:32:55 PM (UTC). This is an informational message only; no user action is required.
    2014-06-14 08:45:18.18 Server      Registry startup parameters:
         -d C:\Program Files\Microsoft SQL Server\MSSQL10_50.ACT7\MSSQL\DATA\master.mdf
         -e C:\Program Files\Microsoft SQL Server\MSSQL10_50.ACT7\MSSQL\Log\ERRORLOG
         -l C:\Program Files\Microsoft SQL Server\MSSQL10_50.ACT7\MSSQL\DATA\mastlog.ldf
    2014-06-14 08:45:18.18 Server      SQL Server is starting at normal priority base (=7). This is an informational message only. No user action is required.
    2014-06-14 08:45:18.18 Server      Detected 8 CPUs. This is an informational message; no user action is required.
    2014-06-14 08:45:18.21 Server      Using dynamic lock allocation.  Initial allocation of 2500 Lock blocks and 5000 Lock Owner blocks per node.  This is an informational message only.  No user action is required.
    2014-06-14 08:45:18.23 Server      Node configuration: node 0: CPU mask: 0x00000000000000ff:0 Active CPU mask: 0x00000000000000ff:0. This message provides a description of the NUMA configuration for this computer. This is an informational
    message only. No user action is required.
    2014-06-14 08:45:18.25 spid7s      Starting up database 'master'.
    2014-06-14 08:45:18.28 spid7s      FILESTREAM: effective level = 0, configured level = 0, file system access share name = 'ACT7'.
    2014-06-14 08:45:18.29 spid7s      SQL Trace ID 1 was started by login "sa".
    2014-06-14 08:45:18.29 spid7s      Starting up database 'mssqlsystemresource'.
    2014-06-14 08:45:18.30 spid7s      The resource database build version is 10.50.2500. This is an informational message only. No user action is required.
    2014-06-14 08:45:18.32 spid7s      Server name is 'MARTINDAHL-PC\ACT7'. This is an informational message only. No user action is required.
    2014-06-14 08:45:18.32 spid10s     Starting up database 'model'.
    2014-06-14 08:45:18.32 spid7s      Informational: No full-text supported languages found.
    2014-06-14 08:45:18.32 spid7s      Starting up database 'msdb'.
    2014-06-14 08:45:18.33 Server      Error: 17190, Severity: 16, State: 1.
    2014-06-14 08:45:18.33 Server      Initializing the FallBack certificate failed with error code: 1, state: 1, error number: -2146893802.
    2014-06-14 08:45:18.33 Server      Unable to initialize SSL encryption because a valid certificate could not be found, and it is not possible to create a self-signed certificate.
    2014-06-14 08:45:18.33 Server      Error: 17182, Severity: 16, State: 1.
    2014-06-14 08:45:18.33 Server      TDSSNIClient initialization failed with error 0x80092004, status code 0x80. Reason: Unable to initialize SSL support. Cannot find object or property.
    2014-06-14 08:45:18.33 Server      Error: 17182, Severity: 16, State: 1.
    2014-06-14 08:45:18.33 Server      TDSSNIClient initialization failed with error 0x80092004, status code 0x1. Reason: Initialization failed with an infrastructure error. Check for previous errors. Cannot find object or property.
    2014-06-14 08:45:18.33 Server      Error: 17826, Severity: 18, State: 3.
    2014-06-14 08:45:18.33 Server      Could not start the network library because of an internal error in the network library. To determine the cause, review the errors immediately preceding this one in the error log.
    2014-06-14 08:45:18.33 Server      Error: 17120, Severity: 16, State: 1.
    2014-06-14 08:45:18.33 Server      SQL Server could not spawn FRunCM thread. Check the SQL Server error log and the Windows event logs for information about possible related problems.
    -=-=-=-=-=-=-=-=-=-=
    I am logged into either the Administrator Account or my Account in which I am in the Adminstrator Group or an Admin.   My OS is Windows 7 Home Premium Edition, so I cannot clear out the MSSQL groups and things I have seen online.  Since this
    is Express, there is limited capabilities with the config tool.  
    I have tried to change the log in as in the SQL Configuration tool and every item I check, Local Service, Local System, Network Service all give the same error,
    "Cannot Find Object or Property. [0x80042004]
    SInce I have Home Premium, MMC will not load the snap in for Local Users and groups to check out these items.
    A check of the net user shows only the Administrator, Guest and my local login in Admin Account.  net localgroups show these items.
    *Administrators
    *Distributed COM Users
    *Event Log Readers
    *Guests
    *HomeUsers
    *IIS_IUSRS
    *IIS_WPG
    *Performance Log Users
    *Performance Monitor Users
    *SQLServer2005SQLBrowserUser$MARTINDAHL-PC
    *SQLServerFDHostUser$MartinDahl-PC$ACT7
    *SQLServerMSSQLServerADHelperUser$MARTINDAHL-PC
    *SQLServerMSSQLUser$MartinDahl-PC$ACT7
    *SQLServerSQLAgentUser$MARTINDAHL-PC$ACT7
    *Users
    The command completed successfully.
    I checked the SSL and Force Encryption is set to no and the certificates have been cleared.  
    I am not sure how to solve this problem.   Please help.   Thanks, in advance. 

    I created a new Administrator account on the machine, mdahl.   I then started the SQL Configuration Tool and changed the log on to this new account.  Same problem.   Here is the SQL Log.
    2014-06-14 11:24:15.83 Server      Microsoft SQL Server 2008 R2 (SP1) - 10.50.2500.0 (X64)
        Jun 17 2011 00:54:03
        Copyright (c) Microsoft Corporation
        Express Edition (64-bit) on Windows NT 6.1 <X64> (Build 7601: Service Pack 1)
    2014-06-14 11:24:15.83 Server      (c) Microsoft Corporation.
    2014-06-14 11:24:15.83 Server      All rights reserved.
    2014-06-14 11:24:15.83 Server      Server process ID is 11448.
    2014-06-14 11:24:15.83 Server      System Manufacturer: 'SAMSUNG ELECTRONICS CO., LTD.', System Model: '700Z3A/700Z4A/700Z5A/700Z5B'.
    2014-06-14 11:24:15.83 Server      Authentication mode is MIXED.
    2014-06-14 11:24:15.83 Server      Logging SQL Server messages in file 'C:\Program Files\Microsoft SQL Server\MSSQL10_50.ACT7\MSSQL\Log\ERRORLOG'.
    2014-06-14 11:24:15.83 Server      This instance of SQL Server last reported using a process ID of 5952 at 6/14/2014 11:21:35 AM (local) 6/14/2014 4:21:35 PM (UTC). This is an informational message only; no user action is required.
    2014-06-14 11:24:15.83 Server      Registry startup parameters:
         -d C:\Program Files\Microsoft SQL Server\MSSQL10_50.ACT7\MSSQL\DATA\master.mdf
         -e C:\Program Files\Microsoft SQL Server\MSSQL10_50.ACT7\MSSQL\Log\ERRORLOG
         -l C:\Program Files\Microsoft SQL Server\MSSQL10_50.ACT7\MSSQL\DATA\mastlog.ldf
    2014-06-14 11:24:15.83 Server      SQL Server is starting at normal priority base (=7). This is an informational message only. No user action is required.
    2014-06-14 11:24:15.83 Server      Detected 8 CPUs. This is an informational message; no user action is required.
    2014-06-14 11:24:15.87 Server      Using dynamic lock allocation.  Initial allocation of 2500 Lock blocks and 5000 Lock Owner blocks per node.  This is an informational message only.  No user action is required.
    2014-06-14 11:24:15.88 Server      Node configuration: node 0: CPU mask: 0x00000000000000ff:0 Active CPU mask: 0x00000000000000ff:0. This message provides a description of the NUMA configuration for this computer. This is an informational
    message only. No user action is required.
    2014-06-14 11:24:15.90 spid7s      Starting up database 'master'.
    2014-06-14 11:24:15.91 spid7s      1 transactions rolled forward in database 'master' (1). This is an informational message only. No user action is required.
    2014-06-14 11:24:15.91 spid7s      0 transactions rolled back in database 'master' (1). This is an informational message only. No user action is required.
    2014-06-14 11:24:15.91 spid7s      Recovery is writing a checkpoint in database 'master' (1). This is an informational message only. No user action is required.
    2014-06-14 11:24:15.92 spid7s      FILESTREAM: effective level = 0, configured level = 0, file system access share name = 'ACT7'.
    2014-06-14 11:24:15.93 spid7s      SQL Trace ID 1 was started by login "sa".
    2014-06-14 11:24:15.93 spid7s      Starting up database 'mssqlsystemresource'.
    2014-06-14 11:24:15.93 spid7s      The resource database build version is 10.50.2500. This is an informational message only. No user action is required.
    2014-06-14 11:24:16.03 spid7s      Server name is 'MARTINDAHL-PC\ACT7'. This is an informational message only. No user action is required.
    2014-06-14 11:24:16.03 spid10s     Starting up database 'model'.
    2014-06-14 11:24:16.03 spid7s      Informational: No full-text supported languages found.
    2014-06-14 11:24:16.03 spid7s      Starting up database 'msdb'.
    2014-06-14 11:24:16.03 Server      Error: 17190, Severity: 16, State: 1.
    2014-06-14 11:24:16.03 Server      Initializing the FallBack certificate failed with error code: 1, state: 1, error number: -2146893802.
    2014-06-14 11:24:16.03 Server      Unable to initialize SSL encryption because a valid certificate could not be found, and it is not possible to create a self-signed certificate.
    2014-06-14 11:24:16.03 Server      Error: 17182, Severity: 16, State: 1.
    2014-06-14 11:24:16.03 Server      TDSSNIClient initialization failed with error 0x80092004, status code 0x80. Reason: Unable to initialize SSL support. Cannot find object or property.
    2014-06-14 11:24:16.03 Server      Error: 17182, Severity: 16, State: 1.
    2014-06-14 11:24:16.03 Server      TDSSNIClient initialization failed with error 0x80092004, status code 0x1. Reason: Initialization failed with an infrastructure error. Check for previous errors. Cannot find object or property.
    2014-06-14 11:24:16.03 Server      Error: 17826, Severity: 18, State: 3.
    2014-06-14 11:24:16.03 Server      Could not start the network library because of an internal error in the network library. To determine the cause, review the errors immediately preceding this one in the error log.
    2014-06-14 11:24:16.03 Server      Error: 17120, Severity: 16, State: 1.
    2014-06-14 11:24:16.03 Server      SQL Server could not spawn FRunCM thread. Check the SQL Server error log and the Windows event logs for information about possible related problems.
    Also, the link you provided is to Windows Vista, not Windows 7 Home Premium.  However, I did look at the registry setting they said to look at in the link.
    Locate the following registry subkey:
    HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList
    Under the ProfileList subkey, delete the subkey that is named <var>SID</var>.bak.
    Note <var>SID</var> is a placeholder for the security identifier (SID) of the user account that is experiencing the problem. The <var>SID</var>.bak subkey should contain a ProfileImagePath registry entry that points to the original profile
    folder of the user account that is experiencing the problem.
    Exit Registry Editor.
    Looking into my registry for my ProfilesList as mentioned. I have these items.
    S-1-5-19 Folder with Default (Value not set), Flags (REG_DWORD) 0x0000000, ProfileImagePath (REG_EXPANDS_SZ) C:Windows\ServiceProfiles\LocalService, State (REG_DWORD) 0x0000000
    S-1-5-20 Folder with Default (Value not set), Flags (REG_DWORD) 0x0000000, ProfileImagePath (REG_EXPANDS_SZ) C:Windows\ServiceProfiles\NetworkService, State (REG_DWORD) 0x0000000
    Then I have an item for each of my three accounts, Administrator, Martin Dahl, and mdahl, All admin Accounts, which has no sid.bak, but a Sid, so not sure how this link helps me either.   Still looking for assistance.  Still not starting.

  • HP Deskjet 2540 will not print some documents, will print others

    Hello everybody,
    yesterday I installed my new printer Deskjet 2540 wirelessly and tested it. All (scan and copy) worked well up to the point where I wanted to print a Pdf file. It did not so I started picking other documents.
    Some pdf files print without a problem, other won't. Some docx files print, other won't. In Excel or Oulook I haven't been able to print anything. In Outlook I was able to print to pdf and then actually print that pdf.
    After some close looking, it seems the printing jobs are sent to the spooling area, but deleted within 1 second without actually printing.
    I have already tried to reinstall the latest drivers (version 12/12/2O13) and using the HP print and scan troubleshouting. This last one gave me the green light and printed the test page without a problem.
    Hopefully anyone recognises this problem? Any solutions would be very welcome.
    Kind regards
    Tom

    Hi there Tom, Thanks for your reply with your information, that helps out quite a bit! 
    First, download (can save right on your Desktop and use whenever you run into a printing or scanning problem) and run the HP Print and Scan Doctor which will search and fix common printing problems. This alone may resolve your issue. If the issue persists, continue on to these steps. Now, I would suggest installing Windows Updates, there will be "optional" ones there as well to install. If there are many updates to be done, this could take up some time.Install Windows Updates  If that doesn't seem to do the trick, I recommend a Level 3 uninstall (uninstall_l3) and reinstall of the printer software and driver. Here are the tools and steps to use.1. Uninstall - HP Officejet Software and Driver Removal Utility2. Restart your PC3. Reinstall - HP Printer Install Wizard for Windows Hopefully the issue will dissipate after the level 3 uninstall and reinstall. If not, here is a link to Adobe to troubleshoot PDF printing problems.Troubleshoot PDF printing | Acrobat, Reader  If you run into any other issues, please let me know. I will be out of the office for the weekend but will check up on this thread when I return! Good luck!

  • "iTuneUp.dll" for tuneup add-on for 64-bit will not load

    When I load up itunes with tuneup, I get the error "iTuneup.dll" could not load in 64-bit mode.
    It goes on to say "Try contacting the plug-in vendor(s) to see if a 64-bit version is available.
    Is there a 64-bit version out there or is there something else going on?

    This is iTunes version 12.1.0.71 and resolved the issue for me per TuneUpMedia:
    This is their response :
    TuneUp Support (TuneUp | Support)
    Hello,
    Thank you for contacting us.
    We apologize for any inconvenience that this may have caused you.
    If you are experiencing errors related to the new iTunes version for Windows machines 64bit, please install the fix from the iTunes support page below:
    http://support.apple.com/kb/DL1784
    If the issue still persists, do not hesitate to contact us.
    Thank you,
    TuneUp Support

  • Oracle Universal Installer will not load on Window 2000

    I cannot load the Oracle Universall Installer on a new
    Dell computer with pre-loaded Windows 2000 software. The setup.exe program will not execute. Any suggestions?

    Thank you, I thought the problem was specific to Windows 2000,
    but it Pentium 4 processors. Here is a reply I found from
    Nick Chernick. We will try it out as soon as possible.
    1. Create a temporary directory on your server.
    2. Copy the contents of the Oracle RDBMS CD to the temporary directory created in step 1.
    3. Search the directory structure created in step 1 for the existence of the filename symcjit.dll.
    4. Rename each copy of the symcjit.dll to symcjit.old.
    5. Run the setup.exe from the \install\win32 directory and install Oracle 8.1.x.

  • Desktop managager 6.0.1 will not load in Windows 7

    I recently bought a new computer with Windows 7.  I installed desktop mananger and everything worked fine.  I tried going in to sync last night and Desktop manager will not boot up properly.  It is getting hung up somewhere.  I tried reparing it, no luck.  I then uninstalled and reinstalled the software and it is still not working.   please help

    I am having the same problem for XP Pro SP3 that I have just done a complete reinstall. As it IS Windows I am guessing it will be the same problem. Someone please help!
    Device Software Version: 6.0.0.600
    Desktop Software Version: 6.1.0.35

  • ITunes will not load in Windows

    I've been trying to load iTunes on my XP PC and it wont work. I try going into system processes and it says iTunes is running a process (not window but process) and isn't loading any window at all. I try ending the process and restarting it, but it wont end the iTunes.exe process. If it helps, this has all started since I download the update for iTunes from 6.04 to 6.05 I believe. Thank you.
      Windows XP  

    OK, so here is the story.
    1) I downloaded the new version of iTunes last night.
    2) It worked fine then
    3) It will not show up as a window when I try to open it, but when I do CTRLALTDELETE, it shows up in the Processes tab but not in the Application tab.
    4) I re-downloaded the installer and re-installed it.
    5) That did nothing.
    6) I kept trying to end the iTunes.exe process in the Processes tab, but to no avail.
    7) I went here and looked for help.
    8) I tried turing off the anti-virus and all that stuff, and it didn't help.
    9) I'm back here, still looking for help.

  • Itunes will not load using windows 7 64 bit

    I have tried everything I know, including uninstall, reinstall, etc. I downloaded Itunes for 64 bit, set it up, and it will not open. I get the hour glass, and then nothing. Anyone have an idea as to a resolution? Thanks in advance.

    I'm having the exact same problem, I click the iTunes icon, and it acts like it will open but then nothing happens. I left it once and after 7 minutes it finally opened. I cannot find any information on why this is happening. My library is around 45GB total, which isn't really that much.
    I'm on Windows 7 x64 w/ SP1 and fully updated. Running newest version of iTunes x64. My system is an HP dv6-1134ca w/ Intel Core 2 Duo T7200, 750GB WD Scorpio Black @ 7200 and 4GB DDR2 PC6400 RAM. I have an iPhone 3GS 8GB that syncs with this PC.
    Someone from Apple should assist with this issue as I did not experience this problem until I recently reinstalled my OS.
    Message was edited by: pr0duct

Maybe you are looking for