Install SOL after ERP

Hello members,
I have a question : I install SOL and generate key. After I desinstall it... But now to get SP, I need to reinstall it. It is mandatory when I read all threads.
Can you secure me that if install SOL on ERP now, I can use on the same SSID  and the same database host without any problems with ERP after ? Can i have some problems with database structure or anything else ?
Best regards and thanks all for your help !

Hi,
Go ahead and install your SOLMAN. Its a separate installation. It will not affect your ERP in anyway. All you have to do is once you install your SOLMAN, in System Landscape Setup (SMSY) you create system with your existing ERP SID and DB. It will not affect your ERP.
I think I have understood your query.
Feel free to revert back.
--Ragu

Similar Messages

  • Problems installing Sol 10 x86 on Compaq Harware

    Please Help! I am a newbie to Solaris and I am trying to understand some of these postings in this thread. I am trying to install Sol 10 on a Compaq DL360 with dual proc 1.26 MHZ and 3 GB RAM. It has an imbeded 5i array controller with two 36 GB drives attached set up as RAID 0.
    I have downloaded the Sol 8 UTI disk for the controller and seem to be able to successfully add the driver for installation. Note: I renamed the directory from Sol_28 to Sol_210 as instructed earlier in this thread. I get a warning message after loading the driver that says :
    Solaris could not detect a primary disk.....
    However, the system has detected a disk controller without a driver, and assumes that the following disk maps to the primary disk:
    /pic@0,0/pcie11,4040@1/cmdk@0,0:a
    Choose continue to confirm the Solaris bootpath of the primary disk.
    I press F2 to continue.
    I continue with setup and choose Interactive text console. It boots the kernel then I get some memory resource overlap warnings but setup continues. Then I get two warnings that read...
    Warning: /pci@0,0 /pcie11,4040@1/sd@0,0 (sd1): Request Sense couldn't get sense data
    and
    Warning:/pci@0,0/pcie11,4040@1/sd@0,0 (sd1): Sychronize cache command failed (5)
    Setup continues...
    I choose language as English and get same two warnings again. Setup continues. I enter network config info, and set root password then continue. Then installation starts and I get this error...
    One or more disks are found, but one of the following problems exist:
    Hardware Failure
    Unformatted diskThen I push f2_ok and I get kicked out to shell.
    What am I missing? Did I miss something? I tried this on another machine, a Compaq Proliant 800 with a 4200 controller with same results. Any help would be greatly appreciated.

    FYI: I tried yet another version of solaris as i found out that theres a bug in the 64-bit kernel on update 4 for alot of new processors. Solaris 10 x86 update 7 did the trick! :). Installed right away on a standard 'Solaris 10 (64 bit)' VM. I still find it strange that the most recent version of solaris 10 fails to even start the installation.

  • Having purchased and installed pages after finishing my 30 day trial I now can't save changes to documents, it keeps saying that my trial is over and I need a serial number?  Never got a serial number, any ideas how to rectify this?

    Hi, having purchased and installed pages after my 30 day trial had finished I am now unable to save any changes to documents I had created in the trial version.  It says I need a serial number, which I never got when I purchased the pages app.  Does anyone kno how to rectify this, I would be very grateful for any help as I'm currently writing up my thesis and am now unable

    Hi, I had the same problem and I found that you don't need a serial number anymore. Here is what I did:
    (1)I went to Applications fodder on my Mac. (You can navigate to the Application folder from 'New Finder Window.')
    (2) Deleted Pages (installed as part of the free  free trial version) from the Applications Folder. Also deleted 'IWorks' from the Applications folder.
    (3) Started AppStore.
    (4) Clicked on  Purchases.
    (5) Clicked on Pages.
    (6) Clicked Install.
    (4) repeated (5) and (6) for Numbers and Keynote

  • How to install iPhoto after upgrading to yosemite?

    how to install iPhoto after upgrading to yosemite?

    Download it from the App Store as Matt suggested.  You may have to move the current version to the Trash Bin (don't delete yet), go to the App Store and look for iPhoto 9.6 under purchases.  It will be free.
    What iPhoto version did you have prior to the Yosemite upgrade?  If it was iPhoto 7 (08) or earlier you'll also have to download and run the iPhoto Library Upgrader 1.1 on your library before opening it with iPhoto 9.6.

  • Unable to install iTunes after converting from Windows Vista to Windows 7.  Am told installation was successful, then "iTunes was not installed correctly", followed by "Error 7 (Windows error 193).

    Unable to install iTunes after converting from Windows Vista to Windows 7.  Am told installation was successful, then "iTunes was not installed correctly", followed by "Error 7 (Windows error 193).  I have my iPod plugged into my computer via USB port.  What am I doing wrong?

    i have the only account on my laptop so have checked and am the account administrator
    i run windows 7 home premium
    I have the same problem and
    have followed the link uninstalling in the correct order,
    then restarted as per instructions,
    went to Apple to download itunes,
    hit download now,
    Visit the iTunes download page. Click Download Now to download the iTunes installer. When prompted, click Save (instead of Run).
    did not get a save instead of run prompt
    Right click on iTunesSetup or iTunes64Setup (the installer you downloaded in step 3).
    If you have Windows Vista, Windows 7, and Windows 8: Choose "Run as administrator."
    i can only click run as administrator from right clicking the shortcut on my desktop screen
    If iTunes fails to install or repair, it might be necessary to remove components left from a previous installation of iTunes and then reinstall.
    sick of doing this
    at least 7 or 8 times i have re installed itunes to no avail
    troubleshooting no better
    please help. pulling my hair out at this stage
    it was working fine until 2 days ago when i opened itunes it offered to update to 12.1
    not working since i clicked yes
    also i have gone to restore previous point and ffs there are no restore points before my multiple reinstalls
    really dont want to have to restore factory settings

  • I have a 4th gen. ipod touch.  It has software 4.2.1 and itunes always tells me I need to update to ios 6.  I always click download and install.  After the download is complete, nothing happens.  It doesn't install on its own.  Thanks,

    I have a 4th gen. ipod touch.  It has software 4.2.1 and itunes always tells me I need to update to ios 6.  I always click download and install.  After the download is complete, nothing happens.  It doesn't install on its own and there is no option to install manually..  Thanks.

    Are you sure it is a 4G iPod?  Does it have a camera?

  • I just had a new hard drive installed. After loading everything back on my computer from external drive, i came to the "select wireless network screen. I've misplaced the WEP password for my internet. Is there anyway to find it on another computer?

    i just had a new hard drive installed. After loading everything back on my computer from external drive, i came to the "select wireless network screen. I've misplaced the WEP password for my internet. Is there anyway to find it on another computer?

    Maybe. What kind of other computer are you talking about? What operating system is it running? What kind of wireless router are you using?
    Your best bet may be to just reset the router and set it up again.
    Just so you know, WEP is a very old security system for wireless and is considered insecure. If you have it available, use WPA2.

  • Mac OS 10.4 Install Stops After First Disc

    I'm trying to do a fresh install of mac os 10.4 on my mac mini g4. I restarted the computer with Disc 1 and booted up while holding C. I went under options and chose to do a fresh install. After it checked disc 1 the install began. After it finished with disc 1, it restarted and then it gave me the message, "Please insert the 'Mac OS X Install Disc 2' disc to continue installation. (You have chosen to install software that requires this disc)."
    This is where the problem is, I insert Disc 2 and after about 10 seconds, it spits it back out. Nothing on the screen changes.
    I've tried restarting it, inserting disc 1 again, restarting the installation process, and restarting while holding C with disc 2 in. None have gotten me past that message.
    The discs I am using are the ones that came with the Mac Mini (two gray discs).
    Any help would be greatly appreciated!

    Hi there, That second Disk thing happens frequently, the best way around it is to do a Custom install, and eliminate enough Printer Drivers, Languages, Fonts, and Applications you don't need... then it may skip #2 altogether.
    http://support.apple.com/kb/HT1442
    So start over,

  • The application manager keeps crashing every time I open it. I need to install the After Effects trial, what to do?

    The application manager keeps crashing every time I open it. I need to install the After Effects trial, what to do? I have a Mac with maverik.

    uninstall it and then reinstall it.
    if that fails, uninstall,clean and reinstall per Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6

  • Acrobat 10 Pro: Unable to Install Updates After Virus Removed: Receive Error 1310 ?

    Acrobat 10 Pro: Unable to Install Updates After Virus Removed: Receive Error 1310 ?
    Attempted to re-install the original Adobe Acrobat 10 Pro from the disk provided with the purchase; and it has put me in a trial; and is requesting that I purchase the software I already paid for, two years ago.

    You can try a repair (may need to go to Control Panel>Programs & Features). A reinstall is a last resort, but if you go there be sure to uninstall from the control panel, run http://labs.adobe.com/downloads/acrobatcleaner.html, and remove any part left of the Acrobat folder. Then reboot as the administrator and reinstall. Be sure to disable antivirus during the install.

  • Install FCP7 after FCPx

    Does anyone know if there are issues re installing Final Cut Pro 7 and the rest of studio on a clean Snow Leopard intal where Final Cut Pro X is already installed?
    My current set up (new machine) has issues with FCPX but on another partition with just the OS and FCPX it works fine. I was intending to remove the existing partition so the clean install remains, migrate personal info and docs plus programs from an external carbon copy of my existing set up.
    If I remove both versions of Final Cut plus the rest of studio and the new Motion and Compressor from the carbon copy partition then migrate apps I hope re installing studio  will fix all my issues. Has anyone tried a partial migration with success?

    Great news, it is all fixed. I used an application called FCS remover to uninstall FCS studio 3 and FCP X as well as Motion and Compressor. Re installed Studio from the disks, down loaded the updates so then Studio 3 was working fine.
    Next tried to download the three new apps but my system (App store) still had them as installed. After discussion with AppleCare created a new user and downloaded the three apps then changed back to my normal account and everything is working perfectly.

  • Solaris 10 x86 CD install - stops after cd1

    Experienced linux user.
    Recent new second hard drive means I can install Solaris.
    Downloaded and burnt CDs (5)
    CD1 boots. Used text based installer. Installed to 2nd partition on primary IDE slave drive. Grub to MBR on this drive then plan to either boot changing BIOS boot or chain load from Lilo on master hd MBR.
    CD1 install set-up fine(I think I answered right)starts to install software - after approx 15-20%. Stops. Tells me CD1 installation complete and reboots.
    However -reboots succesfully to GRUB but no menu or unable to boot kernel using GRUB root and kernel commends.
    CD2 never requested.
    Any help would be appreciated.
    HH

    OK -no replys
    Have now sorted myself by using DVD download and installing on first patition of second hd. Still need to change boot disk in bios to boot so trying to work round this.
    Solaris seems very good.
    Will now try to get speedtouch 330 usb modem working so I ca connect to net.
    HH

  • Can any one tell me how to install flash player on powerbookg4.i actully uninstall it to upgrade it but now i can not install new one.it always says get flash player for powerpc when i try to install it after downloading.it is 10.5.8 version

    can any one tell me how to install flash player on powerbookg4.i actully uninstall it to upgrade it but now i can not install new one.it always says get flash player for powerpc when i try to install it after downloading.it is 10.5.8 version

    Flash Player version 10.1.102.64 is the last version available to PPC Mac users. However, this Flash version won't work for many videos on Facebook, YouTube and other sites. Adobe's latest version, 10.2.x or later, is only for Intel Macs. Adobe will not provide a newer Flash version for PPC Macs.
    The message requesting that you download Adobe Flash Player takes you to Flash Player requiring an Intel processor. Doesn't work on a PowerPC processor. I found a hack, installed it & it works with Firefox, TenFourFox & Safari.
    Download this http://www.steelbin.com/FPforFBPPC.zip to your desktop, unzip it, and replace the current Flash Player plug-in which is in your main/Library/Internet Plug-Ins folder, (not the user Library). Save the old one just in case this one doesn't work.
    Hack Allows PowerPC Macs to Access Flash 11 Content
    http://lowendmac.com/ed/royal/12sr/flash-11-and-powerpc.html
     Cheers, Tom

  • I can't find some installed apps after upgraded to iOS6.0.1 by sync from iTunes

    I can't find some of installed apps after upgraded to iOS6.0.1 by sync fom iTunes. when i try to download them from app store again, it shows OPEN button only but not INSTALL button. is there anyone got this problem too?
    I use iPhone 4s.

    thanks for ur reply, i tried restart my phone, the most used apps back now. anyway, thank u!
    sberman wrote:
    If you know where the app is (in a folder, for example), go to that folder and find the app there.
    Maybe you tried holding the app down in the search screen.  I didn't say clearly you have to go to the app eherever it is, but not in the search screen.

  • After installing IOS6: after erasing the history of Safari, the next time I fire up Safari, I see a split-second of the last displayed screen of Safari. Not a big issue but it should not be that way.

    After installing IOS6:
    After erasing the history of Safari, the next time I fire up Safari, I see a split-second of the last displayed screen of Safari.
    Not a big issue but it should not be that way.

    Download a new copy of the Firefox program: http://www.mozilla.com/firefox/all.html
    Trash the current Firefox application to do a clean reinstall.
    Install the new version that you have downloaded.
    Your profile data is stored elsewhere in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder], so you won't lose your bookmarks and other personal data.

Maybe you are looking for