Install solaris 8 with win98

I am trying to install solaris 8 in my computer. I already have win98 installed. I would like to continue using win 98. I have one disk. I need to know how to install solaris without overwritting my win98 Os.
Thank you in advance

Hi,
I have a 15 GB harddisk. The first 7 GB partitioned and formatted for Windows. Then I installed windows. Next step was to partition (for example with TomsRTBT) the last 8 GB as a linux swap partition. It's unbelivable but this works, because after booting from the Solaris CD the installation program recognices the linux swap partition as Solaris partition. Then with the installation program you can partition the linux swap partition as Solaris needs it (divide it into slices 0 to 7 / c0t0d0s0, c0t0d0s1 and so on). After installing Solaris there is a Solaris bootmanager so you can choose what partition (Windows or linux) to boot from.
Hope this helps. Bye

Similar Messages

  • How to install solaris 8 with a nvidia M64 agp ?

    How to install solaris 8 with a nvidia M64 agp ?

    Use kdmconfig. Make sure your running MU3 or greater because there are some patches
    specific to the M64 cards that are needed to run in the hi res modes.
    ---Bob

  • Failed to install Solaris 10 with Jump Start

    Hi all:
    When install Solaris 10 with Jump Start method. I met below error:
    <<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<
    {3} ok boot net -install
    SC Alert: Host System has Reset
    Probing system devices
    Probing memory
    Probing I/O buses
    screen not found.
    Rebooting with command: boot net -install
    Use is subject to license terms.
    whoami: no domain name
    Hardware watchdog enabled
    WARNING: exec(nstall) failed (file not found).
    (Could not start init) Program terminated
    {1} ok
    Thanks a lots!

    thats because you wrote "-install", which will be parsed as "-i nstall", hence your system will try to execute a kernel named "nstall".
    The proper syntax is "boot net - install", with spaces on both sides of the -.
    .7/M.

  • Installing Solaris 7 with laptop as the console..

    hi,
    i am trying to install Solaris 7 on E250 which didn't come
    shipped with monitor/keyboard/mouse. i made use of a serial
    port connector and could hyperterminal in..but it doesn't
    recognize the keyboard..says it can't open an input device..
    so..i am stuck with the installation..
    any thoughts on this?
    thanks,
    vinny.

    We are seeing the same problem with trying to install Solaris 7 on a system with a Adaptec 2940 scsi card. We also know that the hardware is working because it was tested with Win98.
    The system boots from the install disk but doesn't see the CD-ROM to load the operating system.
    We found a patch 107858-01 but can't get it to copy to floppy after downloading on another older Solaris box.
    The instructions say do a
    <pre>
    dd if=107858-01 of=/dev/rdiskette0 bs=360k
    </pre>
    but it always comes up with device busy.
    We are Solaris newbies so if the answer to this problem is obvious please let us know and forgive the idiocy!
    TIA
    Kim Harris

  • Installing Solaris 8 with a NVIDIA RIVA TNT MODEL 64 video board

    I'm trying to find out if anybody knows of any compatible drivers for the NVIDIA RIVA TNT MODEL 64 video board for Solaris 8.
    I can install Solaris using 640 x 480 with 16 colours, and that works without any problem, but the installation does not seem to have any compatible drivers.
    I've tried contacting NVIDIA but have not received any reply.
    Any help would be greatly appreciated.

    Hi Mark,
    It appears as if this particular chipset is supported as suggested
    in the Hardware Compatibility List.
    The -- in the bus field indicates that this chipset is used on different video devices whether they be motherboard integrated
    video cards or dedictaed video cards. (Check the notes at the top
    of the video display adapter listings).
    The note also explains that there is no guarantee that the same
    chipset will work with all video devices; only a selceted number
    of devices with this chipset have been tested.
    I just located a report where this particular chipset caused exactly the same problem. The TNT2 was integrated into a Microstar 694D motherboard. A full investigation was not carried out as the customer in this case closed the call having used a different card.
    As far as I know, the NVIDIA RIVA TNT2 chipset has successfully been
    tested on the Diamond Viper V770 and Creative Labs 3D Blaster RIVA TNT2.
    Upon bootup what is the BIOS level of the card as reported? Another
    engineer has managed to test a card with TNT2 BIOS 2.05.04, 32MB.
    I think that webstart problems were avoided by installing directly from the SOftware CD's 1of 2 and 2 of 2 in non graphics mode (opting not to specify video at the kdmconfig screens)
    Regards
    Derek SUN-DTS

  • Installing Solaris 10 with RAID + ZFS ?

    Hi, i've recently built a home-made server for racking with a local co-location provider, I've currently got Fedora 9 on it, but would really wish to have Solaris 10 to get ZFS support.
    Got a couple of questions before i wreck my fedora 9 install, if anyone would be so kind,
    I've dowloaded the Solaris 10 5/08 iso and burned that to dvd ready for install. Now when I do install Solaris will it reformat the drives as default with ZFS support or is this something that has to be done afterwards, also with the x86 install will it be able to boot from ZFS?
    Idealy I've got two identical drives on there for RAID 1 so for the entire machine to be using ZFS would be the ideal setup, running in headless with just SSH to connect.
    Any thoughts?

    If you are running Solaris 10 U5, you can only have mirroring using svm, plus the root file system must be UFS.
    However, you can make a slice in a zfs partition an mirror that (I wouldn't recommend using svm to mirror on
    top of ZFS).
    Opensolaris 2008.05 does zfs boot, and Nevada could do zfs boot since Build72 ( http://sol10frominnerspace.blogspot.com/2007/09/setup-zfs-boot-for-build-72.html ) - though bits and pieces were
    not working o rmissing (like swap in a zvol). The big roll in was on Build94 ( http://www.opensolaris.org/os/community/on/flag-days/91-95/ )
    so if you get the latest, your chances of running into any issues are lower.
    -r

  • Installing Solaris 10 with Windows XP

    Hi,
    I have an existing Windows XP installation, and want to install Solaris 10 on the same hard drive, for which I have created an extra primary partition. However, the installation seems to want to take over the whole hard drive, so I am a bit hesitant to proceed.
    Is there a simple guide to installing Solaris 10 to coexist with an existing Windows NT/2000/XP installtion?
    (If I am posting this to the wrong forum, please forgive my ignorance, and kindly point me to the correct one - it is my first time here)
    Thanks and Regards,
    Martin

    Having the partition at the end of the disk shouldn't be the big problem, I often place the partition at the begining as I used to do with linux...
    I really don't know if there is a restriction for the solaris loader to be at the first cilinders (maybe yes, that's why I put it at the begining)....
    but the point here is to have some unallocated space... so try it out... if for some reason the solaris loader doesn't work your system could be screwed up (no booting anywhere) but if that happens the solution is quite simple: to restore the MBR from Windows (recovery console booting from CD)....

  • How to install Solaris 10 with Win XP on 2nd Hard Drive

    hi everyone,
    I'm totally new to Solaris. As an enthusiast, I wants to install Solaris 10 on my Win XP PC's 2nd Hard Drive(40GB, empty) from Solaris 10 DVD.
    I need help from how to format 2nd Hard Drive to how can I configure the PC so it asks me which OS to load every time.
    I will highly appreciate everyone's help as I've just joined SDN. Many Thanx in advance, Jags

    Happened upon this post while searching for an answer to something else and figured I would give my 2 cents on what you are trying to do so as to offer you some other ideas, as in stuff I have done personally in similar situations, just in case the other suggestions don't work out (and to avoid repartitioning your main hdd if it is your ONLY computer with an OS you have available).
    Assuming you have a standard tower or mid-tower with at least 1 free 5 1/4" bay open, and if your motherboard doesn't support booting from a slave drive, and if you prefer a hardware solution so your OS installs are isolated from each other to be certain no corruption happens, like I personally do*. Then you may consider a pair of key lock internal hard drive racks (newegg search "hard drive rack ide" or sata). You would need at least 1 free 5 1/4" bay for the rack mount, then place the hard drives in their housings, each set as master, and you can stick in which ever OS drive you want, turn the key, then boot up (I recommend storing drives not in use in some large anti-static bags for protection). If you have 2 open slots, like I did on my tower, then you can connect both to the same cable and leave both in at all times. Just make sure ONLY 1 drive is keyed "on" at a time, or else you will get errors due to duplicate masters set. Also make sure you ONLY turn the keys when the system is OFF, the racks do NOT make the drives hot-swappable, it is only to offer an easier solution for using multiple hard drives on one PC so you don't have to open the case all the time and potentially damage the pins or the drives when switching them out.. Also you may need longer cables depending on the motherboard controller placement and the size of your tower, 80 wire 40pin if you are dealing with IDE (when you get longer I've noticed less 80 wire and more slower 40 wire cables). As always when dealing with the actual hardware, be extra careful, make sure power is off and PC is unplugged, touch the PC power supply if you don't have better solutions such as anti-static mat/wrist band, etc. You probably know all of this, but just making sure.
    *I lost a lot of data one of the first times I tried an open source OS many years ago (some Linux distro, I forget which), I tried to repartition my windows 98 drive, it worked fine for about a week booting between the two, then most my personal windows files suddenly were random sizes and random folders ended up full of garbage files with garbage file names among other peculiar things.. If I partition a drive I generally only do it BEFORE I put data on it or install OS's.. or at least make CERTAIN that I have adequate methods for restoring my OS and personal files (such as imaging my OS install to a larger drive temporarily, etc)..
    Anyway, was just offering some possible alternatives to repartitioning your main OS drive.. -TCP

  • Help installing Solaris 10 with hyperterminal

    ?I am trying to install Solaris 10 using windows xp with hyperterminal.. I have tried to locate simple steps that would help me with this process. Can anyone help me with this?

    The first step before we start Solaris installation depends on how you can connect to the platform. Please check in your platform documentation if you should use a specific connection type to connect to your machine console. Is a service processor or service controler available ?
    Then when this step is done, you can follow this documentation : Oracle Solaris 10 1/13 Installation Guide: Basic Installations - Oracle Solaris 10 1/13 Installation Guide: Basic Instal…

  • Install Solaris 8 with flash image cretaed on different hardware

    Can I install Solaris 8 on v 480 with the help of flash image created from v 220 syatem.??
    will it work?
    Regards
    Jai

    Hi
    It's a good a way as any considering your environment. What I've done in the past is get hold of around 4 or 8 firewire cables. If these are the newest iMacs then you'll be wanting firewire 800. Image two iMacs first. TDM another two to these two. Now you have 4. If you have another 4 cables repeat the procedure. Now you have 8. The longest time taken will be with the initial one or two iMacs. Thereafter once cascaded in this way with enough cables they can all be done at the same time.
    The only problem I had - and you've mentioned it - is space and power outlets. Desk space is always a problem if they're not in situ.
    You may want to read this:
    http://manuals.info.apple.com/enUS/SystemImagev10.6.pdf
    Something to consider for the future perhaps?
    Judging by your Name is it safe for me to assume you've installed FCP? I guess the image is going to be quite large then? I imaged a suite of iMacs some time back with FCP, Adobe CS4 and Office. Total space taken was 110GB. Took 12-13 hours to image. I hope your image is not that large?
    Tony

  • Installing Solaris 9 with other Operating Systems x86

    Hi, I am new to Solaris world. I want to install solaris 9 on my home computer on which I've already installed Windows XP and RedHat Linux 9. I have a few questions regarding the installation process.
    (a) Is a primary partition necessary for installing Solaris 9 (I have only one primary partition and free space in extended partition)? Is there a way to boot Solaris 9 from a logical drive in the extended partition?
    (b) Will choosing the default option on the Solaris installation fdisk screen erase my previous partitions?
    I will appreciate if anybody care to answer.

    hi sulemankm
    solaris needs a primary partition, booting from a logical drive won't work.
    for very detailed information take a look at
    http://multiboot.solaris-x86.org/
    hth
    jenny

  • Installing Solaris 10 with 19" DELL Flatpanel

    Hi!
    I installed the Solaris 10 (10/06) with an NVidia 6600 GT using a DELL 19" Flatpanel Monitor. The suggested driver didn't work, so I used the NVidia VESA-driver. The reason was, that the monitor displayed only a message that a unsupported resolution is displayed. This happened with all tested combinations of monitors and resolutions :-( VESA worked :-) ...but only for the installation process.
    Installation has finished, the system rebooted and now the Flatpanel displays again: "Unsupported resolution/frequency".
    I booted the safe-mode and tried to run kdmconfig, but it refused to run, because the terminal-type isn't recognized.
    I'm new to Sol10 - what is the best way to solve the problem (without searching a old crt-monitor in the darkest edge of my cellar) ;-) ?
    Thanks
    Bertolucci

    Having the partition at the end of the disk shouldn't be the big problem, I often place the partition at the begining as I used to do with linux...
    I really don't know if there is a restriction for the solaris loader to be at the first cilinders (maybe yes, that's why I put it at the begining)....
    but the point here is to have some unallocated space... so try it out... if for some reason the solaris loader doesn't work your system could be screwed up (no booting anywhere) but if that happens the solution is quite simple: to restore the MBR from Windows (recovery console booting from CD)....

  • Installing Solaris as a guest OS on VirtualBox-1.6.0

    I am using VirtualBox-1.6.0 as my VM on an AMD ATHLON 1800+ with 1GB RAM running Fedora 9 (uname -r = 2.6.25.3-18.fc9.i686). My first attempt to install Solaris was with Solaris10 11/06, while the second attempt was with Solaris10 05/08.
    Solaris10 11/06: 1. Default screen resolution created a window too long with the bottom off screen.
    Is there a recommended resolution when the host screen resolution is 1440x900?
    2. Guest Additions failed to install properly
    What is the appropriate method for installing the Guest Additions for Solaris?
    Solaris10 05/08: 1. Install hangs when installing as a networked system at system 77% initialized prior to the actual install.
    2. Install hangs when installing as a non-networked system when system is at 100% complete and about to reboot. I manually powered off the VM
    unmounted the DVD image and then restarted the VM. When it rebooted, it complained that there wasn't a system on the hard drive.
    In both installs, I went with the default config of the VM (512MB RAM, 8MB Video RAM, creating a dynamic virtual disk starting at 20GB limit), and the install media were iso's, 11/06 5 CD iso files and 05/08 1 DVD iso file.
    TIA
    Scott
    Edited by: Bad2theBone on May 30, 2008 10:37 AM

    Just redid the install of Solaris10 11/06 and this time I was able to change the size of the window so that it is within my desktop. I am running 32 bit apps as my AMD processor is only 32 bit, also I originally went with the CDE desktop and later switched to JDE. I was also able to install the Guest Additions for Solaris this time without any errors using pkgadd from the cli. I haven't retried the 05/08 version yet, but will post when I do. One thing in common with 11/06 and OpenSolaris.200805 is that the audio on my system does not work on either VM VBox 1.6.0. It reports that it cannot find any compatible device. It also complains about the UART device, although I don't have Serial Ports enabled. Also does anyone know how to tell VBoxSvr what host name to use with each VM?
    Fri. 27 June 2008
    I was able to install Solaris10u5 (05/2008) on VMware Server using 684MB of RAM and 20GB HDD. I did not have the tools addition for Solaris, I'm not even sure if there is such an animal, so I had to "Scroll the desktop" to maneuver around. I then tried it again on VirtualBox 1.6.2, got through the initial install setting RAM to 684MB, default Video no Serial ports or USB, although parts were painfully slow. I was not able to do the first reboot, it just sat there saying that it was doing system initialization and the indicator just kept on going back and forth. After about 20 min. I shutoff the VM giving up. Also I still can't get sound to work on either the older Solaris10 or OpenSolaris. In OpenSolaris the DDU indicates that 2 drivers are missing;
    Audio; Intel 82801AA AC'97 Audio Controller
    Other; ACPI AC Device
    Anyone know if and when VBox or OpenSolaris will have these drivers?
    Edited by: Bad2theBone on Jun 27, 2008 8:45 PM

  • Installation Solaris 10 with JumpStart (ssh)

    Hello,
    I want to install Solaris 10 with a server JumpStart.
    But i want only actived the ssh mod (for security).
    How do you write that in the jumpstart script ?
    What is the command line ?
    Anybody can help me, please ?
    Thank you :)
    Message was edited by:
    Marcorel

    I have seen this too over the years and it ultimately comes down to something innate:
    Here are a few suggestions:
    1. Try and use interface ce0.
    2. Check default route on both jumpstart server and client.
    3. The arp cache may need to be flushed on the Jumpstart server.
    4. Use snoop and see what happens during the actual RARPing phase between the server and host.
    5. Switch the order in the sysid config file as indicated below:
    system_locale=en_US
    name_service=none
    network_interface=ce2
    {hostname=donau1  ip_address=10.50.57.24 netmask=255.255.252.0 protocol_ipv6=no default_route=10.50.56.1}
    security_policy=none
    terminal=vt100
    timezone="MET"
    timeserver=10.50.57.214
    nfs4_domain=dynamic
    root_password=*****************
    Please note I blanked your root password. Let me know if this helps.

  • Installing Solaris 9 on an x86 platform with win98 and win2K

    Hi,
    There is a Pentium P4 (2.4 GHz) machine with a 40 GB hard disk...
    This has 1 primary partition and the remaining is the extended dos partition. In effect there are the following logical drives - C, D, E and F. These are FAT32 partitions and have WIN98 and WIN2K (server) installed on them.
    There is a free space of abt 8 GB remaining on which i am trying to install Solaris 9 (via CD). But am just not able to do so.
    During the process, i get to the step saying that my disk is to be partitioned and that i could either choose the DEFAULT LAYOUT or manually partition the disk with the fdisk.
    Default layout indicates that there would be 1 x86 partition (primary, boot) and the remaining would be a solaris partition - implying that all my other data would get formatted out!!!
    When i try to use the fdisk to manually partition the disk, the free space mntd above does not show up!!!
    But this is seen when i use the DOS fdisk - i.e. i could create a logical drive on the extended dos partition...
    Can some one please help me install the Solaris in the free space i have ?? Thanks.

    Hello!
    There is one simple method also..
    Instead of Installation disk of Solaris, insert the Software 1/2 Disk, and try to follow the actuall Suninstall method of installing Solaris. Here you will get the option that how to utilize the free space.
    I myself have installed more 5 OS on a single Hard disk :) this way. Try this method

Maybe you are looking for