Install Telnet? "pacman -s telnet" doesn't work...

Trying to search to see if telnet is available for install, but doing "pacman -s telnet" as implied in manpage doesn't work, it just thinks its bad syntax.
Also would like to have some information about it before installing (if its possible). As in the BSD-world, its usually very simple to read the info in the ports-tree about the packet to be installed, before you do it.
Here its just "pacman blabla" and hope for the best.
What I'd like to know is if telnet, if it now is available for install, will just install the client and not the server.
Anyway wont be open from the router, but I dont want any telnet server, just the client.
Many thanks for some help

Dusty wrote:
Seb74 wrote:
"pacman -s telnet"
/quote]
Your syntax error is that should be a capital S.
Dusty
Not quite, doing 
pacman -S telnet
would return
telnet: not found in sync db
His error is he need to add the capital S (sync) to his lower s (search) as in iphitus' reply.
pacman -Ss telnet

Similar Messages

  • Am unable to install CS5 on mac running yosemite. Tried installing JavaFor OSX, it still doesn't  work. Error message reads "inconsistency in the installer database"

    Am unable to install CS5 on mac running yosemite. Tried installing JavaFor OSX, it still doesn't  work. Error message reads "inconsistency in the installer database"

    remove your caps database.  this shows the location for cs3.  make the obvious changes for cs5.
    Error "...Installer Database is Corrupt..." when you install Adobe Creative Suite 3 products

  • I've upgraded to itunes 11.1.4 Now my ipod and my wife's will not connect/ sync. Itunes says it can detect an ipod but it can't be identified correctly. I have uninstalled and re installed ITunes but it still doesn't work

    I've upgraded to itunes 11.1.4 Now my ipod and my wife's will not connect/ sync. Itunes says it can detect an ipod but it can't be identified correctly. I have uninstalled and re installed ITunes but it still doesn't work

    I too am having the same problem. I'm glad to know it's not just me

  • I have a MacBook Pro Retina (2,3 GHz Intel Core i7 - 8 GB 1600 MHz DDR3 - Intel HD Graphics 4000 1024 MB). I use KompoZer for my website, but after installing OS X Yosemite it doesn't work right (I cannot see images in the website).

    I have a MacBook Pro Retina (2,3 GHz Intel Core i7 - 8 GB 1600 MHz DDR3 - Intel HD Graphics 4000 1024 MB). I use KompoZer for my website, but after installing OS X Yosemite it doesn't work right (I cannot see images in the website).

    It's beta open source software so I'm not surprised. It does't look to be too active a project, so I don't know if it will help or not but you might be maybe better off posting a bug report on their Sourceforge page here: http://sourceforge.net/projects/kompozer/

  • I have install io6 and now Music doesn't work, sometimes it stay with a blank page with no possibility to press anithing, sometimes it crash. I have match music active with more than 15000 title. Someone could help me?

    I have install io6 and now Music doesn't work, sometimes it stay with a blank page with no possibility to press anithing, sometimes it crash. I have match music active with more than 15000 title. Someone could help me?

    What is your current Flash Player version: http://helpx.adobe.com/flash-player/kb/installation-problems-flash-player-windows.html ?
    What is your display adapter, driver version & date?  See http://forums.adobe.com/thread/945765

  • Hi, everybody. After installing LION my D-Link doesn't work. So I don' t have Internet.

    Hi, everybody. After installing LION my D-Link doesn't work. So I don' t have Internet.

    Hi, everybody. After installing LION my D-Link doesn't work. So I don' t have Internet.

  • Since I installed IOS7 in my iPad, doesn´t work and in the screen appears the apple logo only. How can I solve this problem? Please, help!!

    Since I updated IOS 7 in my iPad, it doesn´t work and appears the Apple logo in the screen all the time. Any solution?

    1)  Connect to iTunes on the computer you usually Sync with and “ Restore “...
    http://support.apple.com/kb/HT1414
    2)  If necessary Place the Device into Recovery mode...
    http://support.apple.com/kb/ht4097
    Note on Recovery Mode.
    You may need to try this More than Once...
    Be sure to Follow ALL the Steps...
    Once you have Recovered your Device...
    Re-Sync your Content or Restore from the most Recent Backup...
    Restore from Backup
    http://support.apple.com/kb/ht1766
    NOTE:
    Make sure you have the Latest Version of iTunes Installed on your computer ( v 11.1)
    iTunes free download from www.itunes.com/download

  • Can't install iMovie5 after installing iMovie6 and finding it doesn't work

    Hello. I have Mac OS X 10.3.9 and it's a Power G4 computer.
    Okay, I installed iMovie6 on it and now I can't hear the sound for my movie (which was originally edited on a previous version of iMovie--iMovie3 perhaps? not sure).
    Anyway, my guess is that iMovie6 just isn't supported by my computer, that my computer doesn't have enough memory or power, so I want to replace it with iMovie5. But when I inserted the DVD, it let me install Garagband and iTunes but the option to install iMovie5 was disabled. I then tried dragging iMovie6 into the trash then installing iMovie5 afterward, but that didn't work either.
    It's funny because my computer has all the specs for iMovie5 but not necessarily for iMovie6, yet 6 installed fine but now I can't replace it with 5.
    Okay, any suggestions?

    Hi
    There are four places/buttons that can do this
    • Main speaker volume setting in Finder/Desktop
    • Main speaker volume setting in iMovie
    • Each audio track can be muted by ticking the box far right of it
    • IN iMovie Pref - You can set Play-back via Camera. IF YOU DO THIS
    and disconnect or mute the Camera there will be silence.
    Un chequing this or reconnect Camera and set up sound on this will restore audio.
    Yours Bengt W

  • Installed SQL Server but it doesn't work

    I installed SQL Server 2014 but it doesn't work. What should i do now? i have all feathers installed and i can find them in my control panel but i can't find the application on my system, i allowed my firewall to have access on SQL but it doesn't work. I
    need SQL Sever to do my work Can you please help me?
      Aynur Amirfallah

    i find it but it says invalid license but i installed the free one for 180 days
    Hi Aynur,
    Are you getting the following error message when launching SQL Server Management Studio 2014?
    “Invalid license data. Reinstall is required”
    If that is the case, please perform the following steps to resolve the issue. For more details, please review this similar
    thread.
    1. Uninstall Visual Studio 2010 (Isolated) using Add/Remove Programs.
    2. Click on SQL Server 2014 in Add/Remove Programs, then click Uninstall/Change and choose Repair. 
    On the screen where you select the instance to Repair, change the drop down to "Repair shared features only" and complete the wizard.
    However, if you (“I installed SQL Server 2014 but it doesn't work”) refer to other SQL Server issues, please help to post more details here for analysis. We need to know that how you connect to SQL Server, and the full error message you have received. Also
    please show us
    SQL Server 2014 Discovery Report.
    Thanks,
    Lydia Zhang
    Lydia Zhang
    TechNet Community Support

  • Installed iTunes 7.3.2 - doesn't work

    I recently installed the latest iTunes and whenever I open it, it immediately freezes and goes to "not responding" status and I have to ctrlaltdel it closed. I'm not running any fancy software, just doesn't work. Should I uninstall and redownload it, will I lose all my info if I do that?
    Thanks for any help...

    Okay. Sometimes if iTunes is trying to download a (slightly dodgy) podcast file while it is doing the library update, it will hang on "updating library".
    Usually when that's afoot the hang seems to happen right at the very beginning of the "updating library" process.
    If that's what's happening, this might be of some help. Disconnect from the internet (or your network) and try launching iTunes again. Does the library update go through properly then? if so, try quitting itunes, reconnecting to the internet/network and launching iTunes again. Does it still launch properly?

  • After instal OX Maverics Face Time doesn't work

    I do not know why but after upload my OX Maverics Face Time doesn't work. It's impossiblo to signe in.
    id apple and password are both correct.
    why?

    Hello matteo.coletti,
    It sounds like you are having some trouble signing into FaceTime on your Mac. I would try the troubleshooting steps in this article named:
    FaceTime for Mac: Troubleshooting FaceTime
    http://support.apple.com/kb/ts4185
    Activating FaceTime for Mac
    Use your Apple ID to register and use FaceTime. FaceTime registration validates your Apple ID and email address for use with FaceTime.
    If you are unable to activate FaceTime, try the following:
    Sign in to FaceTime for Mac using a valid Apple ID. After you validate the email address for use with FaceTime, other FaceTime users can connect to you using that email address. If you encounter issues registering or using an Apple ID account:
    Ensure that you have an active Internet connection.
    Verify that you are using a valid Apple ID at appleid.apple.com. You can also create an Apple ID or reset your password from this website.
    Check that your email address is verified in FaceTime > Preferences.If FaceTime > Preferences shows your email status as "verifying," follow the instructions in the verification email that was sent to complete the process.
    Toggle FaceTime off and on in FaceTime > Preferences.
    If still unable to Sign In follow the instructions in FaceTime, Game Center, Messages on OS X: Troubleshooting Sign in
    Troubleshooting FaceTime for Mac
    You can make FaceTime calls using the FaceTime app. You can call FaceTime users whose contact information is in Contacts. You can add contacts and edit contact information in either FaceTime or Contacts. To place a video call, you may use a phone number or email address.
    If you encounter issues making or receiving FaceTime calls, try the following:
    Verify that FaceTime is enabled in FaceTime > Preferences.If the issue persists, or if you see the message "Waiting for Activation", try toggling FaceTime off and then on.
    Verify that the Date, Time, and Time Zone are set correctly:
    From the Apple () menu, choose System Preferences > Date & Time > Date & Time.
    Enable "Set Automatically".
    Click the Time Zone tab and confirm the closest city is correct.
    Verify that both parties are connected to an active broadband Internet connection.
    See Mac OS X: Troubleshooting a cable modem, DSL, or LAN Internet connection.
    Consult Using FaceTime behind a firewall for necessary ports to open in firewalls, security software and routers.
    If you encounter issues using a Wi-Fi network, use standard Wi-Fi network troubleshooting to resolve interference and other issues.
    Verify the phone number or email address being used is the correct one activated for FaceTime.You can verify that you are using a valid Apple ID at appleid.apple.com. You can also create an Apple ID or reset your password from this website.
    Otherwise, could you elaborate a bit on any error messages or prompts you are getting?
    Thank you for using Apple Support Communities.
    Regards,
    Sterling

  • Adobe Digitals 2.0 no longer works so I deleted it and installed 3.0 but that doesn't work either

    I have been using Adobe Digital Editions 2.0 for about a year or more. It no longer worked so I installed 3.0 but it's not working either. I keep getting a APP Crash.

    A good place to ask questions and advice about web development is at the mozillaZine Web Development/Standards Evangelism forum.
    The helpers at that forum are more knowledgeable about web development issues.
    You need to register at the mozillaZine forum site in order to post at that forum.
    See http://forums.mozillazine.org/viewforum.php?f=25

  • Pacman -S catalyst doesn't work?

    So, I know it seems odd registering and posting on the same day, but it doesn't look like anyone is having this problem. I have a Dell Inspiron 1501, and so far it's worked like a charm, except when I try to do the above command (pacman -S catalyst for those with a short attention span ) Instead of downloading and installing the catalyst package, like the wiki, and everyone else seems to say, I get a very lovely error:
    catalyst package not found, searching for group...
    error 'catalyst' : not found in sync db
    I've tried everything in an attempt to get the damn ati drivers, but nothing is working. And the only reason I'm doing it is so I can boot using vga=864 in the grub line no other reason. If someone can explain to me WHY the sync db is out of date with what is in the AUR repos, and why pacman is afraid of the delicious drivers located within I would REALLY appreciate it.

    That is because Arch recently pulled the catalyst driver off the official Arch repos.  Due to it's (lack of) development.
    http://www.phoronix.com/scan.php?page=n … px=NzEwMg2
    You can still get it from Yaourt/AUR if you really want it.

  • My i tunes is not working anymore. it says the application failed to start because MSVCR80.dll was not found. I have tried re-installing the program but it doesn't work.

    Hello,
    Yesterday I tried to get onto iTunes and was unable to. I keep getting this message:
    Itunes.exe - Unable to locate component.
    This application has failed to start because MSVCR80.dll was not found.
    Re-installing the application may fix this problem.
    I have tried to uninstall and re-install the program several times but cannot get it to work. Now I get this message:
    iTunes was not installed correctly. Please reinstall iTunes.
    Error 7 (Windows error 126)
    I have tried to do what I can but am not really iTunes savy and would like to get this issue resolved. Can anyone help me?
    THANK YOU!!
    Cyn

    Hello there, Cyn.
    The following Knowledge Base article provides some great information for troubleshooting your issue. Keep in mind uninstalling and reinstalling has to be done in a very specific fashion, therefore use the guidelines from this article to accomplish this:
    Issues installing iTunes or QuickTime for Windows
    http://support.apple.com/kb/ht1926
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

  • I installed iLife '11, but iPhoto doesn't work.

    I installed iLife '11, but when I try to open iPhoto, it says it needs to be updated, but when I open Software Update, it doesn't have an update. It might help if I said iMovie and GarageBand updated no problem.

    I've got a way to just open iPhoto, but it will not stay open if you quit terminal. Ok.
    Go to the original iPhoto probably in your applications folder
    Right click it (or control+click)
    Go down to "Show package contents" and click.
    Open the Contents folder, open the MacOS folder, open the application iPhoto
    Terminal should run, and behind it is iPhoto, i havent checked this for bugs, but let me know if you did
    PS:
    DO NOT CLOSE TERMINAL, IT WILL CLOSE IPHOTO
    THIS IS FOR MAC ONLY

  • I've installed firefox and the bookmarks doesn't work

    I've installed, un-installed, and re-installed firefox. Bookmarks will not work. I've clicked the star - and nothing. I've tried to use the menu bar to bookmark a page and - nothing. I've checked the sqllite file and it is not marked as read only.
    What else can i do to be able to get bookmarks working?

    Thanks CoryMH - but that isn't the problem either. Nothing in bookmarks is working - I can't import, I can't create new bookmarks. When I open "show all bookmarks", nothing is there - nothing is in the unsorted file either.
    They just completely don't work - neither importing, nor creating new.

Maybe you are looking for