Install TFS 2012 Solution packages (WSP) on MOSS 2007 that already have TFS 2010 Solution package installed and deployed

Hi
I hope to place this question in the proper forum but if not, can someone move it to the right forum. Thanks
I have a MOSS 2007 farm and I have 2 TFS 2010 SharePoint extension solution package (WSP) installed and working properly for a while now.
Microsoft.TeamFoundation.SharePoint.Dashboards.wsp and Microsoft.TeamFoundation.SharePoint.wsp
The Application team is going to upgrade their TFS 2010 server to TFS 2012 and want me to installed the new TFS 2012 SharePoint WSP solution to our MOSS farm.
My Question is that do I have to uninstall TFS 2010 solution package first or can I installed the new TFS 2012 solution packages in addition and both TFS 2010 and TFS 2012 solution package will co-exist and will work properly?
the reason i want to do this is making sure all existing TFS 2010 will still work. My concern is if I have to uninstall TFS 2010 solution just to get TFS 2012 solution then run into problem with existing TFS 2010 projects.
Thanks in advance for any advice or insight on this.
Swanl
Swanl

Hi Swanl,
you may check on the prequisite in sharepoint products,
"SharePoint Products: If you have a portal server, you might have to upgrade it to continue using SharePoint integration. We no longer support Windows SharePoint Services 3.0 or Microsoft Office SharePoint Server 2007. See
SharePoint Products requirements for Team Foundation Server."
Supported versions, editions
SharePoint Foundation 2013¹
SharePoint Server 2013,¹ (Enterprise or Standard edition)
SharePoint Foundation 2010²
SharePoint Server 2010,² (Enterprise or Standard edition)
http://msdn.microsoft.com/en-us/library/hh667648.aspx
Regards,
Aries
Microsoft Online Community Support
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Similar Messages

Since March 2012 my iphoto 11 trash folder says that I have 13,346 photos in the iphoto trash, but there are no thumb nail copies in the viewer window. I can delete additional photos but clicking on the "empty trash" button. Any solutions?

Since March 2012 my iphoto 11 trash folder says that I have 13,346 photos in the iphoto trash, but there are no thumb nail copies in the viewer window. I can delete additional photos but clicking on the "empty trash" button.
My system trash finally emptied when I discovered "trash it!" is not longer supported by the most recent osx. Then I found an updated version of Onyx that did work with that trash emptying problem.
I have a total of 5,723 photos in my library. A macdevelopers group recently started suggesting a multi library manager for iphoto to overcome some kind of library quota limitations with iphoto as opposed to "more advanced" photo handling, storing and editing programs. If I went to a mult library manager for iphoto would that cure the apparent incongruent data retrieval problem in iphoto 11 regarding 13,346 phantom photos that will not securely delete?
Are there any other possible solutions out there?

Try the following:
1 - delete the iPhoto preference file, com.apple.iPhoto.plist, that resides in your
User/Home/Library/ Preferences folder.
2 - delete iPhoto's cache file, Cache.db, that is located in your
User/Home/Library/Caches/com.apple.iPhoto folder (Snow Leopard and Earlier).
or with Lion and Mt. Lion from the User/Library/Containers/com.apple.iPhoto/
Data/Library/Caches/com.apple.iPhoto folder
3 - launch iPhoto and try again.
NOTE 1: If you're moved your library from its default location in your Home/Pictures folder you will have to point iPhoto to its new location when you next open iPhoto by holding down the Option key when launching iPhoto. You'll also have to reset the iPhoto's various preferences.
NOTE 2: In Lion and Mountain Lion the Library folder is now invisible. To make it permanently visible enter the following in the Terminal application window: chflags nohidden ~/Library and hit the Enter button - 10.7: Un-hide the User Library folder.
OT

How to create a security role to delegate package creation and deployment?

Hi,
I am new to SCCM 2012 and I would like to delegate packaging and deployment based on an AD container and user. For example, I have a US-SCCM-Admin account created in the US OU in Active Directory. I also have computers in the US Computers OU in AD. I am
not sure what settings I need so that the US-SCCM-Admin account only has rights to create and deploy packages to the US OU and no where else? I added US-SCCM-Admin security group from AD to the "Administrative Users" group in SCCM. But now I need
to configure a role for this group but I am not sure which one to copy or import? I tried copying the "Application Deployment Manager" role and renaming it appropriately but when I login to SCCM as this user, they dont have the option to create or
deploy packages? Does anyone have a simple step by step on this or explanation on what to do to delegate package creation and deployment based on the user in an AD group? TIA

The Application Deployment Manager role is only allowed to deploy an already existing application. You would have to use the
Application Administrator role instead.
Torsten Meringer | http://www.mssccmfaq.de

Deploying the FEP client (SCCM 2012 R2) on computers that already have the FEP client from a previouse failed site installation

Hello All
I am in the process of rebuilding our SCCM 2012 R2 site server (single site). The FEP client from the previous sccm 2012 r2 deployment was successfully installed on all of our endpoints and communicating with no issue with the site server. Since losing that
server we are in the process of deploying a one. My question is, when I configure FEP and the site server attemtps to deploy the FEP client will the current one be reinstalled even though its same version? Or will SCCM just recognize there is already
a compatible client installed. I asked a similar question about the SCCM client in another post which was very helpful.
Any advice would be greatly appreciated
Phillip
http://social.technet.microsoft.com/Forums/en-US/84923512-b456-4850-b2ba-8d22bb54ab5c/deploying-sccm-2012-r2-clients-to-computers-that-already-have-the-sccm-2012-r2-client-from-failed?forum=configmanagerdeployment#ab630267-6f25-45ff-a732-231b8008876c
Phil Balderos

No, the Endpoint Protection client is still a separate client. By, enabling the client settings the ConfigMgr client will make sure that the Endpoint Protection client is installed and makes sure it will be 'managed'. After re-installing the ConfigMgr
client, the ConfigMgr client will see that Endpoint Protection is already installed and the new ConfigMgr client will start 'managing' the Endpoint Protection client.
My Blog: http://www.petervanderwoude.nl/
Follow me on twitter: pvanderwoude

I have a 2010 mac mini referbished and i dont see the Disk Utilitiy in the Utilities on the install disk. Is that because it is refurbished?

I have a 2010 mac mini referbished and i dont see the Disk Utilitiy in the Utilities on the install disk. Is that because it is refurbished?

The software that comes with your refurbished Mini should be identical to that which comes with a new Mini. Disk Utility should be in Applications > Utilities. Alternatively, choosing Utilities from the Go menu at the top of the finder windownwill take you directly to the Utilities folder.

HT201303 How can I reset my security answers ? I do not remember them, and Apple support just can help me if I remember one o more answers. I already have three Follow-ups: 237312883, 374526499 and 239690719 with no solution.

How can I reset my security answers ? I do not remember them, and Apple support just can help me if I remember one o more answers. I already have three Follow-ups: 237312883, 374526499 and 239690719 with no solution.

Reset Security Questions
Frequently asked questions about Apple ID
Manage My Apple ID
Or you can email iTunes Support at iTunes Store Support.
If all else fails:
1. Go to: Apple Express Lane;
2. Under Product Categories choose iTunes;
3. Then choose iTunes Store;
4. Then choose Account Management;
5. Now choose iTunes Store Security and answer the bullet questions, then click
      Continue;
6. Sign in with your Apple ID and press Continue;
7. Under Contact Options fill out the information and advise iTunes that you would
      like your security/challenge questions reset;
8. Click Send/Continue.
You should get a response within 24 hours by email.
In the event you are unsuccessful then contact AppleCare - Contacting Apple for support and service.
Another user had success doing the following:
I got some help from an apple assistant on the phone. It is kind of round about way to get in.
Here is what he said to do and it is working for me...
a. on the device that is asking you for the security questions go to "settings", > "store" >
      tap the Apple ID and choose view"Apple ID" and sign in.
b. Tap on payment information and add a credit/debit card of your preference then select
      "done", in the upper right corner
c. sign out and back into iTunes on the device by going to "settings"> "store" > tap the
      Apple ID and choose "sign-out" > Tap "sign -in" > "use existing Apple ID" and you
      should be asked to verify your security code for the credit /debit card and NOT the
      security questions.
d. At this time you can remove the card by going back in to edit the payment info and
      selecting "none" as the card type then saving the changes by selecting "done". You
      should now be able to use your iTunes store credit without answering the security
      questions.
It's working for me ...I just have to put in my 3 digit security pin from the credit card I am using.
Good Luck friends!

How to Install and deploy Oracle Discoverer in Oracle AppServer 10.1.3.2

I need to know how to install and deploy Oracle Discoverer in Oracle Application Server 10.1.3.2?

Hi
Discoverer doesn't install into OAS 10.1.3.2. It uses 10.1.2.1 or 10.1.2.2.
When you install Discoverer it installs its own OAS components.
Best wishes
Michael

Jabber GUest Server 10.5 Install and deploy

HI,
I try to install and deploy my first jabber guest Server 10.5 .What I see is that I should use a secure sip trunk to the ucm ? is this really needed ?,because if I use secure sip trunk I have to install certs
Could I deploy it without secure sip trunk ? and only use self cert between expressway c and e ?
Thanks for your Information
Josef

Hi Josef,
It is fine to configure SIP trunk on UCM to be non-secure.
Between C and E you just need to make sure there are CA-signed certs installed. Doesn't matter which CA, could be your own.
Hope this helps.
Mike

Export all the lists/libraries from moss 2007 then import to sharepoint 2010

Hi All
I am looking to get a script which export's all the list/libraries in moss2007 then import into sharepoint 2010. Please help me out.
I have qus here, it will take care about the user security ?
Thanks in advance.
Subhash

Inderjeet, just a quick pointer about this utility. The guy behind it is a UK based MVP, who's mentioned in the tool description that it's not an upgrade tool. I just think that should be kept in mind before offering it as a solution.
Subhash, if you've not got a lot of content to move and don't mind installing a third party tool, Metalogix Content Matrix Express edition would work perfectly for this need. It's also free.
http://www.metalogix.com/Resources/Promotions/Content-Matrix/Content-Matrix-Migration-Express-Download.aspx
Steven Andrews
SharePoint Business Analyst: LiveNation Entertainment
Blog: baron72.wordpress.com
Twitter: Follow @backpackerd00d
My Wiki Articles:
CodePlex Corner Series
Please remember to mark your question as "answered" if this solves (or helps) your problem.

Plateform Independent Patching Process for Install and deployment

I have a requirement to download an application/patch from the content server and install in the existing jboss environment. I am looking for a Tool to create a package that can be downloaded and executed at jboss end to install any application in the same jboss container. The tool should compatible for Mac and Windows.
Please let me know if there is a way exists to do the same. Help is appreciated.
Thanks and Regards
Vishwa

Hi,
Agree with Tek-Nerd.
What's more, as the Lync FE patch of Site is 8308.857, so before you move CMS and PChat Server, please update it to the latest version of CU firstly.
Also, as you enable mirroring database, it is recommended to use the Invoke-CsDatabaseFailover -NewPrincipal Primary command, and then verify
that the primary server is principal for all databases before you run the Install-CsDatabase cmdlet.
Best Regards,
Eason Huang
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Eason Huang
TechNet Community Support

Installing and deploying a .webpart file in SharePoint 2013

I have a webpart that took from a SharePoint 2010 web site from its webparts library. This webpart has the .webpart extension. I downloaded it as a copy. Now I want to install it to a SharePoint 2013 site ti its webpart gallery. I tried using Visual Studio
by opening the .webpart file and copy its XML to the new empty .webpart source code. Also I uploaded the .webpart file to the Sharepoint 2013 WebPart Library. That also not successful. There was an error regarding when I insert the webpart to a page with a
Correlation ID.
The error is at the below.
Unable to display this web part. To troubleshoot the problem, open this web page in a Microsoft SharePoint Foundation compatible HTML editor such as ...........................
Correlation ID: cb3b839c-b011-e0f5-999c-31292d78623c
Then how am I supposed to do this properly. I am new to Sharepoint.
Could someone please help me to solve this matter?
Thank you,
Regards,
Chiranthaka

What web part is it? Is it a custom / third party one?
Also, more information on the .webpart structure might be handy -
http://www.wictorwilen.se/Post/Web-Part-Properties-part-3-the-webpart-file.aspx
Steven Andrews
SharePoint Business Analyst: LiveNation Entertainment
Blog: baron72.wordpress.com
Twitter: Follow @backpackerd00d
My Wiki Articles:
CodePlex Corner Series
Please remember to mark your question as "answered" if this solves (or helps) your problem.

General install and deployment problem with WLS clustering on two boxes

Hi,
I've come across a general installation problem with WLS with a cluster spanning two different physical machines and two Managed Servers, one Managed Server per physical machine.
The problem is, starting from scratch, you install WLS on both physical machines. You can then use the config wizard to create the domain, cluster and managed servers, but this is a manual typing in process.
So we've now got a WLST Script which we run with "java weblogic.WLST domaincreate.py domain.properties". This is good as it creates the domain, cluster, managed servers and JMS modules.
Now the trouble is, it doesn't do anything to the 2nd physical machine which will be running only the 2nd Managed Server.
One dirty way to get around this in order to start the 2nd managed server was to copy the domain directory to the 2nd server, but I'm sure this is bad practice and what you can actually do is improve the WLST script to actually, but the same as the config wizard and dump the nessary information to the 2nd physical machine in order so you don't need to copy the domain directory across so that it will startup straight after running the WLST.
Any help appriecated.
Surfbum.

Hi I think I've found the answer. You can build a managed server template using the pack command.
http://e-docs.bea.com/common/docs90/pack/tasks.html

AIA Installing and Deploying Demo Application failed:Build.xml not found

Hi,
i am trying to install demo application using following steps
Extract Foundation Pack Demo under <AIA_HOME>.
If not already done so, set environment variables:
For Linux (bash shell)
source <AIA_HOME>/aia_instances/<aia_instance>/bin/aiaenv.sh
For Windows
Navigate to aiaenv.bat located in <AIA_HOME>\aia_instances\<aia_instance>\bin
Run aiaenv.bat
You may have to assign higher memory values in your JVM parameter settings for demo to deploy if you have not set the maximum possible value already. Use the following three steps as guidance to configure JVM parameters:
Navigate to <Middleware home>\user_projects\domains\<domain_name>\bin
Update the following parameter in the setSOADomainEnv.sh (for Linux) and setSOADomainEnv.cmd (for Windows) file:
USER_MEM_ARGS=""-Xms2048M -Xmx2048M -XX:PermSize=256M -XX:MaxPermSize=512M -Xmn1228M -XX:SurvivorRatio=10""
Note: These are recommended values while using Sun JVM. Actual values that you set depend on your system configurations. When running on dedicated hosts, you can set the JVM heap size as high as possible. Higher value results in better performance. However this number is constrained by the operating system's addressable memory space.
Restart SOA server
Run the deployment script:
At the command line prompt, run the following command for your platform:
For Linux:
cd $AIA_HOME/samples/AIADemo/config
ant -f deployDemo.xml
For Windows:
cd %AIA_HOME%\samples\AIADemo\config
ant –f deployDemo.xml
while runiing the deployment script it showing build.xml not exist..
Error Details
D:\Soasuite\oracle\Middleware\SOASuite11gR1PS4\oracle_common\samples\AIADemo\con
fig>ant -f deployDemo.xml
Buildfile: build.xml does not exist!
Build failed
Any suggestions
Thanks in advance

Hi
This is the location i am having my installation because in this location only MY AIA instance got created.
Here i am pasting my env variable setup in aiaenv.bat file
#set environment variables
set AIA_HOME=D:\\Soasuite\oracle\Middleware\SOASuite11gR1PS4\oracle_common
set MW_HOME=D:\\ORACLE\Middleware
set SOA_HOME=D:\\ORACLE\Middleware\Oracle_SOA1
set JAVA_HOME=D:\ORACLE\Middleware\jdk160_24\jre
set AIA_INSTANCE=%AIA_HOME%/aia_instances/AIAinst1
kindly help...

I erased my mac os x hard drive and tried installed lion again without knowing that I have to use my apple account, and I have forgotten my details for it.

So I held down option and the power button and erased my hard drive to set it back to factory settings for school and I did not know that I needed my apple details to install lion again, and I dont know the username and password for it because I never really used the apple app. I created another apple account but it says I cannot use that account on it.. Please help, what can I do?

Command R (no option)
From what I learned from testing with a number of people, you do need to invoke IR in certain circumstances.
Command + R will reinstall the currently installed OS version. Apple ID verification is needed.
Command + Option + R will reinstall the originally installed OS version IF that was Lion or ML and the drive is erased first. (This is the option that needs to be used by sellers needing to wipe the drive and reinstall the original OS version before selling the machine; it will also work with a newly installed HD or other problems requiring a fresh install). Apple ID verification is not needed.
IR would appear to be helpful here since the OP is unable to use his Apple ID?

I have a 2010 mac book pro and when i go to do apple updates instead of it updating and installing it just logs me out of my user and never updates?

i want to know how to fix this

Launch the Console application by entering the first few letters of its name into a Spotlight search, and look under "System Diagnostic Reports" for crash logs. Select the most recent one and post the contents -- the text, please, not a screenshot. For privacy’s sake, I suggest you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report.

Install TFS 2012 Solution packages (WSP) on MOSS 2007 that already have TFS 2010 Solution package installed and deployed

Similar Messages

Maybe you are looking for