Install third-party apk??

Look i know this might be somewhere on the fourms or a link to a site but im really intrested to know ive recently come from an old android running open-source cyanogen mod 11 kit kat 4.4.4
i know it may be possiable to root my current zte open c firefox os an flash a rom or image of android or create a dual-boot
but really not keen to mess around with firefox os i have all my old apk games on sd-card and everytime i click open it does nothing? Over-all love the firefox os but i cant even play facebook games i.e house of fun slots, slotcity just to name a few this is really annoying me and got me thinking surely there is a way to install apks this is all open source with a big community looking forward to reading any solutions cheers

Cheers mate
ill leave it as firefox os im quite enjoying it
but there is alot of open source flashing custom recoverys root access an roms of android onto some of these firefox os phones
it is even posiable to dual boot from sd card to either firefox os or android
but hey i only just got this phone i dont plan on being stuck coding or readin fourms to try unbrick my phone if it goes sour so in time i can see firefox being able to do the same games as android ios and windows

Similar Messages

Way to use Visual Web part in sharepoint 2010 without using/installing third party tools

I want to know the way to use Visual Web part in sharepoint 2010 without using/installing third party tools.
Please provide me a link where i can actually know how it is done.

+ to _eNo_,
Visual Studio 2010 has support for visual webpart, you can find that under Visual C# node in the Installed Templates section (if your preferred language is C#)
Hope this helps!
Ram - SharePoint Architect
Blog - SharePointDeveloper.in
Please vote or mark your question answered, if my reply helps you

Problems installing third party software on Mountain Lion.

I received message "Your security preferences allow installation of only apps from the Mac App Store and identified developers." Where is this security setting so I can change it to be able to install third party software? "
Thank you in advance.

Open the Security & Privacy preferences. Click on the General tab. At the bottom you will find your Gatekeeper settings. Click on the lock icon and authenticate so you can change the selection. If software does not have a developer's signature in it then the software will not be installed until you change the selection to "Anywhere."

When installing third party software, how do I temporarily turn off the factory installed virus sw and firewall?

when installing third party software, how do I temporarily turn off the factory installed virus sw and firewall? Is it necessary on a Mac to do so? I come from the Windows world and am still in the learning curve on the Mac.

Correct. I have not installed ANY other software for anti-virus, etc. I want to install a Synch app for my HTC phone to sych with MS Outlook 2011 installed on my Mac. HTC will not synch with it otherwise. That was really the basis for my question....if installing a non Apple app can be done without messing with factory settings on the Mac. In Windows I remember that I needed to disable Norton and the Firewall in order for installation to occur.
Thanks.

Installing Third Party Audio Units

Wonder if anybody can help. I have just bought a G5 Dual 2.3 and Logic Pro 7.1 I can not find any way of "installing" third party plug ins. I have checked the ones I have ( Waves Platinum for AU for OSX ) and they are valid for Logic 7. I have put several plugs in Applications , but they are not even appearing in Logic Audio Units Manager. Im probably missing something really simpe here. Im also having the same type of problem trying out "demo" versions of some new AU instruments e.g. X treme FX and MOTU MX4 Soft Synth ( that is appearing in Audio Unit Manager but will not open, so maybe its not valid for Logic yet?) Pleeeeeeease Help. Thanks. Paul

Hey Paul & Welcome!
I don't quite understand what you mean when you say you can not find a way of "installing".
You should have installers for your AU's. If you doubleclick one of those, it should take you through the installation process. Apologies if this is what you have done, but I become a little suspicious when you say you have "put several plugs in your Applications folder". This is sometimes the right procedure when it comes to installing certain applications (e.g. Reason), but rarely or never the case with plug ins. You need an installer.
Now, If indeed you have gone through the installation process, it is still possible that the plug in question won't show up as available. As you rightly point out, it may be rejected by Logics AU Manager.
Check in your following folders:
HD/Library/Audio/Plug Ins/Components
and,
Home/Library/Audio/Plug Ins/Components
wich is were your AU's are supposed to be located.
If they are not there, they are not installed. If they are there, they should be scanned by AU Manager and be validated or refuted.
When you have checked the folders, you can open Logic and run AU Manager and check the status of your installed AU's. The ones that have failed or crashed can still be selected by checking the little box, with the risk of making Logic unstable. You will indeed get a warning every time you open logic, telling you how many failed AU's you're currently running.
So, check for installers, check your component folders and cross reference with the AU manager.
Again, sorry if this is at a beginner level for you, I could not quite make out where you're at.
Good Luck!
Erik

Installed third party applications not showing Application folder?

Hi,
i've installed third party application outside from AppStore. i chosen "Anywhere" option on Gate keeper. however its not proper installation process hence how can i install? if i install third party application which is get .DMG file from some one else and installed. if i install those application its not displaying inside the Application folder on my Mac OS X 10.8.3.
Please anyone suggest me,
Thanks in Advance,
Suresh Balakrishnan.

if i double click on Xcode icon, Xcode application lauched immediatly. however Xcode is not there in the Application folder.
Because you didn't drag and drop copy the app into the Applications folder, so your running it from the DMG instead.
A DMG is basically a disk image volume, like any other seperate hardware volume like a USB thumb drive, a external hard drive, or another partition, except it's virtual and based all in software.
If you don't know your way around a computer you shouldn't be using Xcode to begin with.

Unable to install third party effects/titles. Missing folders in Motion Template.

Hi. I am unable to install third-party titles/effects/generators in FCP X version 10.2. I navigate to my Movies/Motion Templates folder and there are no subfolders in there. I created new ones labeled "Titles", "Generators", etc and placed the complete folder of the third party effects in the appropriate subfolder, but the effects do not show up in FCP X. I am on a managed laptop and do not have Administrative control. I am wondering if because I have a user profile with limited installation control, could that be affecting my ability to add the effects or is there something else that is wrong? Any help would be greatly appreciated.

Preferences do get corrupted rather often, and deleting them is usually one of the first thing one tries whenever something strange happens in FCP X.
How exactly did you delete the preferences? The current method of choice is by holding down the command and option keys when starting the application and then confirming when the dialog box comes up.
I have not tried running FCP X from a non admin user account. Whether this could be the issue, I can't say.
Can you post screenshots of a Finder window, in column view, showing the folder structure inside Motion Templates?

How to install third party plug-ins from photoshop elements 11 to new 13 in my PC win7?

how to install third party plug-ins from photoshop elements 11 to new 13 in my PC win7?
Thank you.

Hi ,
Your windows is 32 bit or 64 bit .
If win 7 32 bit
Just copy the plugin from PSE 11 and paste it to PSE 13 plug-in folder.
If win 7 64
PSE 11 and PSE 13 are installed as a 32 and 64 bit respectively , so you need to install plug-in again.
Thanks,

Install third party certificate on MAC os X

Hello,
I have installed leport 10.5.X on my machine. I am new bie for MAc and want to install intermediate certificate for my domain from Digicert. I have registered from Digicsert. Please help me to how can I install on the machine. I also need to create a new certificate but when I tried to add it shows an error message like this.
"There are no valid root or intermediate certificate authorities available to sigh certificates. Use the "create certificate Authority" option to create a certificate authority."
Can anybody please help me to what should be the next step.
And how can I install third party certificate.
Thanks in advance.

There is a product called VolumeWorks that is supposed to do this. I looked at the demo, but I could not get it to see the extra space so I ended up backing it all up and erasing the Raid and doing a block copy with Carbon Copy Cloner.

BlackBerry-8800 Cannot Install Third-party softwares

Hi ... can anyone help me how to be able to change all settings (including password prompts), and install Third Party Applications
I am unable to make changes to the settings or install Third Party Applications. I have a Blackberry that was previously connected to a company's BES. Actually, I purchased this phone 6 days ago from open market; i dont know about the previous owner.
Please, Please, Please ...... someone help me
Solved!
Go to Solution.

Hi and welcome to the forums!
What Urumilton gave you was the ONLY procedure to remove an IT policy. A wipe will not remove the IT policy
Your other recourse is to box up the phone and return to sender.
Thanks
Bifocals
Message Edited by Bifocals on 01-18-2009 01:48 AM
Click Accept as Solution for posts that have solved your issue(s)!
Be sure to click Like! for those who have helped you.
Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure.

How to install third-party SSD as boot disk in MacPro 5,1

I had so much trouble with this that I thought I'd post a recipe that others could follow.
The first thing you should know is that it's not possible to get a non-Apple SSD recognized in a sled slot of a MacPro 5,1. It just doesn't see them at all, even if (as some suggested) previously partitioned as a GUID partition (which works in a MacBook Pro, but not a MacPro 5,1). This is true even with the most up-to-date EFI firmware. You're going to have to use a PCIe adapter card.
The next thing you should know is that not all PCIe SATA3 SSD adapter cards are bootable on a MacPro 5,1. For instance, even though the Sonnet Tempo SSD is advertised as working for a boot drive in a Mac Pro, it actually works in any Mac Pro *except* the 5,1. In a 5,1 drives on the card do not work as boot drives, either with option boot or if you select it as the startup drive after booting from something else. Also, EFI boot is extended by about a minute -- not the end of the world, but an annoyance. The Tempo card does work well for add-on drives, its very fast. I am pretty sure the Tempo Pro variant of the card also does not work, as the Sonnet support guys told me that they have to use use rEFIt for booting 5,1 MacPros in their lab. I imagine if the Pro worked they would have pointed me at that instead. (Note that rEFIt has been superseded by rEFInd, http://www.rodsbooks.com/refind/. I didn't try using rEFIt or rEFInd because I found a better way, but if you want to dual-boot to Linux those utilities are apparently Da Bomb.)
An Apricorn Velocity x2 Duo card *will* boot, and does not have a long EFI boot delay. That card is a little more expensive than the Tempo SSD (but not the Tempo Pro SSD) but it works properly. It's worth the extra money, especially since it's the only card I could find that explicitly claimed to work as a boot drive on a 5,1 MacPro. And it does.
One caveat: With the Tempo SSD the SSD drives were invisible until repartitioned in GUID format, which also happens if you try to use a third-party SSD inside a Macbook Pro. I found that I could repartition one drive, a Crucial MX500 960GB, using a run-of-the-mill USB SATA2 adapter. Unfortunately this solution did not work with a Samsung Evo 1TB drive, I had to use an external USB3 enclosure. Moreover, the enclosure supported both FireWire and USB3 but FireWire did not work. This FireWire issue might be due to the super-cheap enclosure I was using, so YMMV, but keep in mind that it's possible that you'll need either a USB3 expansion card in the MacPro, or a different Mac, to perform the initial repartition to GUID format.
It's possible that SSDs would be visible on the Velocity card even before repartitioning, I don't know as both of my drives had been repartitioned prior to trying the Velocity. So, it might work ... but you might need to partition externally.
I don't know if pre-partitioning is necessary with the Velocity card, as I only ever tried pre-partitioned drives with it. If you try the Velocity and the drive isn't seen, that's the problem and you'll have to use an external SATA adapter of some sort to repartition before installing on the Velocity card.
After partitioning the drive and installing on the Velocity card, it worked fine. Yosemite installed properly and with reboot it blazed.
Next up, TRIM support. For some reason known only to Apple, the Apple AHCI driver refuses to enable TRIM support for anything other than Apple drives. It's possible that there are or were bugs in some of the early SSDs and Apple is just playing it safe, although I would have preferred to have the option to enable TRIM or not if that's the case. Unfortunately there is no such option, you have to use a substitute AHCI driver.
Unfortunately if you're using Yosemite you cannot use a substitute driver without disabling kext extensions, because Apple will not sign anyone else's driver (at least not at the time of this writing). That's unfortunate, I would prefer to have signed extensions if I could, but realistically speaking you're no worse off in terms of security than you were with Mavericks so it's not the end of the world. With a little luck Apple will either start supporting TRIM on third-party drives or starts signing third-party drivers sometime in the future.
So: Before you can start TRIMming drives, you first need to run this command, or something like it:
sudo nvram boot-args=“kext-dev-mode=1”
I rather like seeing the boot process, rather than just the Apple logo, so I use this:
sudo nvram boot-args=“-v kext-dev-mode=1”
I tried both Trim Enabler (http://www.cindori.org/software/trimenabler/) and Chameleon SSD Optimizer (http://chameleon.alessandroboschini.com/). As of this writing the Chameleon driver is more up-to-date, and comes with some additional utilities that are pretty nice. Take your pick, though, both worked fine in my experiments.
With a TRIM-enabled AHCI driver, kext signing disabled, a Velocity card, and your favorite SSD you are in business.
The only weird thing after all of this is that non-boot SSDs on the Velocity card (or on the Tempo) are ejectable. As far as I can determine there’s no way to mark them as non-ejectable. That’s a minor annoyance compared to the performance you get out of the SSD, though.
Because, with this stuff in there, yowza is the MacPro 5,1 a fast machine. You Will Like It. Enjoy!

Then you should read these.
http://forums.macrumors.com/showthread.php?t=1804704&highlight=sonnet+tempo+pro
http://forums.macrumors.com/showthread.php?t=1721573&highlight=sonnet+tempo+pro
This was strange but has to do with how startup disk and nvram interact
http://forums.macrumors.com/showthread.php?t=1795765
I think your problems were solvable and not that the Sonnet card and 5,1 is not bootable, in fact the 5,1 is easier, there are more supported cards.
I have the 1,1 where the Sonnet Pro is recommended but for data only and are not bootable because of the 32-bit EFI firmware. NOT the 4,1 and 5,1. The 2008's are problem child and have a mix of PCIe 1.1 slots, first implementation of EFI64 that also has problems. Also the 4,1 has two PCIe 2.x slots 3 and 4 that share a controller but that simply limits bandwidth.
I would have left the TRIM support and NVRAM changes in Yosemite to a separate thread if you wanted to focus on the Sonnet Tempo Pro support in Mac Pro 2010-12 5,1s.
Also the make of SSD can vary and they also have their own firmware as do bootable controllers along with the EFI of the Mac, all of which have to work together. Meaning it might be that Samsung 840 va 840 EVO vs 840 Pro will all be slightly different but my experience is Samsungs work well (as do others like Crucial with the proper firmware - and there was/is an issue with the firmware of the Samsung 840 but not with booting).
The PCIe card gets seen and treated as external and therefore 'eject' but of course you can't when it is the system boot drive.
One thing I found last week and meant to mention: After installing or changing PCIe cards, RESET SMC made all the difference in the world with the long boot delay. Some PCIe cards will add a few seconds, system has to search the device tree which now shows another controller with multiple devices - and sometimes NVRAM and SMC are what I will call "dirty" and need to be rebuilt and reset.

Install third-party drivers in 3.2

Hi all,
after (clean) installing SQLDev 3.2, I'm unable to add third-party drivers in the automated way (from Tools/Prefs/Ext/Check for up):
- tried (multiple times) with MSS and MySQL drivers,
- pop-up window (licenc-agrement) appears and
- nothing else happens.
Checking the <profile>\SqlDev mappa shows a dir named "temp\update" has just created and it contains the expected files (eg. oracle.sqldeveloper.thirdparty.drivers.sqlserver.58.17.zip) with 0 bytes.
Any idea?
OS: Win7(x64), Java(TM) Platform 1.7.0_09, Oracle SQL Developer 3.2.20.09 Build MAIN-09.87.
(Manual installation of this drivers works fine.)
Thanx,
M. Zsolt.

Thanks,
I guess there is some problems with the update center: drivers also cannot be installed with JDK 1.6.37 and other extensions install normally.
BTW:
SQLDev works quite well with JDK1.7 (at least, I didn't find any "big" errors, some minor bugs are out there, of course),
moreover, it works also with MySQL-connector-5.1.22 :) - even though it's stated in the Rel.notes: "Do not use the latest MySQL driver 5.1. Use the 5.0.x drivers for MySQL."
M. Zsolt.

Problem installing third party software

I have encountered an issue whereby on trying to install downloaded upgrades to third party software I am asked to insert a disk entitled with my user name. At first I put this down to dodgy software, but have now had the same issue with installing Adobe Acrobat Reader 9.0. The installation software appears to be something called iNosso.
Essentially the installation gets as far as stating "This software was successfully installed" but before coming up with the summary window comes up with:
*Please insert the "username" disc to*
*continue installation.*
You have chosen to install software that requires this
disc.
(username isn't actually shown what is shows is presumably the local name I have given to the computer).
No such disc exists and have tried the original installation discs for 10.5 but to no avail. I end up force quitting the installer but am concerned that by doing so I may corrrupt the installation and build up problems for myself going forward.
Has anyone else encountered this issue and if so is there a fix?
Thanks in advance.

Allan, I had hoped not to have to go through the steps you suggest as one of the reasons for doing Migration Assistant was to avoid re-installing all my applications and all the relevant license information. Also note that my old apps are running fine it is just third party installers that appear to be the issue. As a test I ran the Apple installer loading some additional apps that came with the computer with no issues. I would also add that all my applications old and new appear to be running without issue. Indeed even those apps affected by this installation issue (incl Acrobat Reader 9.0) seem to run normally so it does appear to be an annoying glitch in the installation that simply stops the automatic completion of the process.
My nervousness however is that something more sinister is going on in the background that I am not aware of that may affect the performance of the computer going forward.
However from both yours and Barry's comments it would appear that this is not a common fault therefore is likely to be peculiar to the way I have set things up so in order to resolve I will have to try either re-installation of everything per Barry or a re-installation of apps as you suggest. Now I just need someone to find me the time!!
If anyone else has come across this issue before and found an easier resolution I would be eternally grateful. Thank you Allan and Barry for the speed of your responses and your suggestions.

Installing third party instrument samples

I just purchased and installed Vienna Instrument's Special Edition. Nothing tells me how to import the samples into Logic Pro's tracks, and Logic Pro isn't any help either - it says refer the VI manual (and adds the helpful comment that if third party samples are properly installed, they will work just fine).
I went through the installer tutorials, including mapping to the folders that hold the VI instruments. I also watched the basic online tutorial on how to use the VI Instruments Standalone (which is no help because I'm trying to import these sounds into Logic, and neither Logic nor the VI manual give you ANY indication how these two pieces of software have any relationship to each other.)
Classic example of manuals being written from the world view of the informed, instead of thinking what somebody without any background in this would need to know (i.e. the people who actually need the manuals). It's like trying to find the interstate entrance in New England - "If you don't know how to get there, you don't belong there."
I'm also experiencing all kinds of crackling and latency, having simply installed the samples, without having plugged any of them in to a Logic Pro track - seems like I'm scraping the bottom of my memory without having done ANYTHING yet. (Macbook Pro 1.86 GHz, 2GB DD2 Ram).

Yes,
I am able to open VI's stand alone software and hear the samples. I have no idea what the "AU Manager" is and nothing in the Logic Pro manuals give any indication of such a thing (continously curious to me how all these manuals are written for those who don't need them). Can you tell me how to find and run this AU Manager that seems critcial to getting started, since Logic Pro and VI apparently don't seem to think it's necessary to mention it (and yet they tell you to read the manuals cover to cover...)?
Yes, the Vienna Instruments component is in it's correct folder.
And yes, I've restarted the computer and all the software a dozen times.
Yes - the syncrosoft license is installed and operating correctly.
If you've got other ideas of why this won't work, let me know. I'm burning up a precious weekend on something that ought to be brain-dead easy to do.
I've also got the MacProvVideo DVD tutorials for Plug-ins and for EXS24 (Martin Sitter's group). What a joke. They explain all about the complex conversion of non-native instruments like AKAI, and completely ignore telling someone how to connect VSL to Logic Pro. Again, assuming it must be too easy (who do they think buys tutorials?).
Very frustrated over what should be a very simple process.
Help??

Installing Third-Party Applications

My family wants to start downloading some games and third-party applications for our iMac. I am new to iMac system administration, so I have a few questions.
I want to install the download so that they will be accessible to everyone. Does this have to be done in the admin account? What is the difference between an admin or a non-admin user downloading software?
MultiMacs

Sound advice. For the OP, when you've sorted those things out, see these (I'm assuming that you're coming from a windoze environment):
Switching from Windows to Mac OS X,
Basic Tutorials on using a Mac,
MacFixIt Tutorials,
MacTips, and
Switching to the Mac: The Missing Manual, Leopard Edition.
Additionally, *Texas Mac Man* recommends:
Quick Assist.
Welcome to the Switch To A Mac Guides, and
A guide for switching to a Mac.

Install third-party apk??

Similar Messages

Maybe you are looking for