Install two Process Server on one machine

Hi everyone,
I would like to install two Process Server on only one server (machine). This machine will be use for two different environnements?
Do you think it's possible? and what would be the impact about this kind of installation?
If it's possible, the port used by the two Process Server will not be in conflict?
Thanks,
Regards,
Jean-Christophe

Hi,
With software trees I meant software installation directory trees, so say:
- /opt/redwood/dev for your development process server and
- /opt/redwood/test for your test process server
If you install in two different directories like above, because you want to be able to do independent upgrades, then it is recommended to have two network agents too on different ports, so these can be independently upgraded too. For future reference it then helps to name the services rwna_dev and rwna_test respectively in the above directory example.
If you need to run two process servers on the same box but connecting to the same repository, then you can use one software installation (f.i. /opt/redwood/server) and you need only one network agent.
Regards,
Anton.

Similar Messages

Question on Oratab file when installing two Oracle instances in one machine

OS: AIX 5.3
DB version:10.2.0.1.0
I already have an instance of version 9.2 which is very important and which we don't want to upgrade and we wanted another test(unimportant) oracle instance called testdb_10gR2 of version 10.2.0.1.0 on the same machine.
So i installed 10.2.0.1.0 on a different ORACLE_HOME .Installation of the new 10.2.0.1.0 (testdb_10gR2) went ahead successfully and at the last step i have to log in as root and execute root.sh
I entered 'n' for the options "dbhome", "oraenv", "coraenv" as shown below so that the settings for our 9.2 instance (which is very important) will remain intact.
What would have happened if i entered 'y' ie. Overwrite ?
The following environment variables are set as:
ORACLE_OWNER= oracle
ORACLE_HOME= /u04/testdb_10gR2_Feb2009
Enter the full pathname of the local bin directory: [/usr/local/bin]: /usr/local/bin
The file "dbhome" already exists in /usr/local/bin. Overwrite it? (y/n) [n]: n
The file "oraenv" already exists in /usr/local/bin. Overwrite it? (y/n) [n]: n
The file "coraenv" already exists in /usr/local/bin. Overwrite it? (y/n) [n]: n
Entries will be added to the /etc/oratab file as needed by
Database Configuration Assistant when a database is created
Finished running generic part of root.sh script.
Now product-specific root actions will be performed.
During installEdited by: Citizen_2 on Jan 30, 2009 5:05 AM

'dbhome','oraenv','coraenv' are sripts used to set a proper environment (see the descriptions at the beginning of these scripts). These scripts rely on oratab (they check for existing SIDs), but answering 'Y' does not mean you will modifiy an existing oratab.
I think these scripts change rarely, so it's very likely overwriting the existing 9i scripts with the 10g scripts changes nothing. To be honest I don't use the scripts , so in my case 'Y' or 'N' doesn't matter. But important is you don't have to worry about 'oratab'.
Werner

Possible to install two groupware connectors on one machine/system?

Hi gurus,
we want to save the money for a new machine, so I'm currently looking to get a second groupware connector installation done on the same machine. Anyone having experience with that? Is it even possible?
The setup.exe does not really offer to do a second groupware connector installation for exchange. Even if that would be possible I fear the created services for our machine (SAP MS Exchange Groupware Connector 2.1) will be overwritten by the second installation?
Torsten

Torsten,
I know from how the Lotus Notes version of the connector works, it just wouldn't work because of how it uses the Lotus Notes libraries. For exchange I'm not sure if there is as tight of integration. The connector is relatively light weight, so have you considered piggy backing it on another box such as a SAP webdispatcher or something else. You could also look at using a VM as the requirements for the connector aren't that much for a test system.
Take care,
Stephen

HOW DO I INSTALL TWO DIFFERENT ITUNES ON ONE COMPUTER

how do i install two itunes accounts on one computer using windows 7

By creating a second user account for the other person.

Two Mobile Server for one Backend ?

Hi,
we need two Mobile Server. One for internal access and one for external access.
Is it possible to have two Mobil Servers for one backend system and can I sync all the config between this two servers ?
Regards,
Gerald

Hi
Yes, you can mirror on the hardware,DB and OS level.
This is not possible with your mobile server.
<i><b>One for internal access and one for external access</b></i>
For external access you can expose one of the IP's as a static IP and for internal Access you dont need to expose it.
If you are planning to have two Servers then you will have to get as many licenses from SAP.
PS: reward points for helpful answers
Regards
Arun

Two ASM instance on one machine

Can we have two ASM instance on one machine ? My Manager is saying he is positive and I don't have anything to show him that we can not do that. Is there any link, document anything available for this ?
Thanks

Keyur,
This is an interesting question. I have seen references where in it clearly says that only one ASM instance is required per node irrespective of number of databases on a node. But, I haven't seen a clear indication, wherein it is mentioned that you can't start more than 1 ASM instances on a node. Therefore, I thought, I would give it a shot, by attempting to bring up a second ASM instance and here is what I get:
SQL> startup nomount pfile=init+ASM5.ora
ORA-00304: requested INSTANCE_NUMBER is busy
SQL>
If I shutdown my ASM1 (first ASM instance) then it allows me to bring up the ASM5 instance. This leads me to believe that you can't startup up more than one ASM instance on a single node.
Here is a note, which mentions that you need only one ASM instance per node. https://metalink.oracle.com/metalink/plsql/docs/ASM%20best%20practices.pdf
Thanks
Chandra

Suprisingly two Processes running for one database

Hi all,
Today morning in one of our database servers, we see two processes running for one database.
COBLpo05 11949 1187 0 Mar 25 ? 37:50 ora_smon_BLINDEA1
COBLpo05 7789 1187 0 Mar 25 ? 5:35 ora_smon_BLINDEA1
Can anybody suggest me what is the reason behind it and what to do in this case?
Thanks in Advance.

The ORACLE_HOME may have been set twice with differents values in it (i.e. extra slash) before starting twice the same db.
Please, have a look to this article from Ivan Kartik :
http://ivan.kartik.sk/index.php?show_article=40
And depending of your OS, you could check what ORACLE_HOME is used for each process :
How to Check the Environment Variables for an Oracle Process*
Doc ID: 373303.1*
Nicolas.
added the metalink note ref.
Edited by: N. Gasparotto on Sep 4, 2009 11:34 AM

Two SAP installation in one machine

Dear Experts
SAP ECC6 EHP4 READY
DB2
HP-UX
i have a requirment to install DEV and QAS server in single server. i already installed the DEV server. now i need to install the QAS server my query is what the prerequisite i need to fallow before starting the QAS server installation. and i there any file which need to be modifi. ITS my first time to work on this kind of landscape. kindly guide me.
i have the below file system.
/sapmnt/DEV
/db2/DEV/sapdata1
/db2/DEV/sapdata2
/db2/DEV/sapdata3
/db2/DEV/sapdata4
/db2/DEV/saptemp1
/db2/DEV/db2dump
/db2/DEV/log_dir
/db2/db2dev
/db2/DEV/db2dev
/db2/log_archive/
/db2/log_retrieve
/db2dev
/usr/sap/DEV/DVEBMGS00
/usr/sap/trans
/sapmnt/QAS
/db2/QAS/sapdata1
/db2/QAS/sapdata2
/db2/QAS/sapdata3
/db2/QAS/sapdata4
/db2/QAS/saptemp1
/db2/QAS/db2dump
/db2/QAS/log_dir
/db2/db2qas
/db2/QAS/db2qas
/db2qas
/usr/sap/QAS/DVEBMGS01
/sapdump
thanks/regards
sadiq

Dear Sadiq,
From DB point of view there is no problem to install two separate databases
of DB2 on one machine. The DB2 source files are installed into different directories and will not
impact each other.
After installing the software, the DB2 instance called "db2<SID>' is
created with the DB2 version you choose. The installation procedure
depends on the SAP release.
Whether of not your machine is able to handle both systems running on one server depends on
the hardware and settings.
Regards,
Paul

How to install two oracle database on one system

i want to install two oracle databases on single system how it is possible
how i can manager oracle home and is this possible to install two different version of oracle in single home or single system forexample oracle 9 and oracle 8 .
A.R

Hi,
yes, u can have more databases on a single machine and they can be of different versions.
You have to use and initialize the correct ORACLE_HOME to create the DB of the version U use.
For ex, u have 2 homes:
C:\Oracle\Ora817 8i home and C:\Oracle\ora920 9i home
Normally, using OFA, imagine that You want create 2 db, TEST_8I for 8i home and TEST_9I for the 9i home, You shold have:
C:\Oracle\Admin\TEST_8I\<<OFA DIRS>> and C:\Oracle\Oradata\TEST_8I for 8i DB adn C:\Oracle\Admin\TEST_9I\<<OFA DIRS>> and C:\Oracle\Oradata\TEST_9I for the 9i version.
It is important, when You create the DB, that u use the executables of C:\Oracle\Ora817\bin to create 8i db and C:\Oracle\Ora920\bin for the 9i one.
Then U can use the 9i listener to manage both instances
Hope this helps
Max

How to install oracle8i and 9ias in one machine.

I need u help. I should install both product in one machine. and should 9ias should be enterprise version.

For NT here are the steps.
First you install 817 database say in home orahome1. Your database should be up and runningbefore insatlling iAS
See that you pagesize(swapfile) is >= 500MB
Then install iAS in a different home. iAs 10220 will list two homes (default is 806 and iSuites)
Give the required parameters when prompted.
If you give me more info as to which version of ias platform and what is your requirement then I can be more clear

Installing two Oracle Version in One Windows[/b]

Hi Guys
I want to know how to install two different versions of Oracle in One Windows Under Different Homes.

A guess is that this is due to the earlier 8.1.7.x ODBC drivers did not support multiple homes (max one ODBC version per PC - ugh!).
If you can't skip this error, try to uninstall 9i ODBC, install 8i, upgrade 8i driver and then reinstall 9i ODBC (in the right home)... I guess a better way would be to do this in the correct order on a clean PC (to avoid registry messup as much as possible).

14 out of 15 MAcbooks installed snow leopard succesfully. One machine keeps spitting out the CD! Why? What can be done to upgrade machine?

Trying to upgrade Os X. 14 out of 15 MacBooks installed succesfully. One machine keeps spitting out the CD! Why? What can be done to upgrade machine?

Sounds like the optical drive may be on it's way out. It should be possible to connect the Mac to one of the others by firewire and do the installation by booting from the install disc in the donor Mac, then choosing the remote HD as the target when prompted.

Installing two OBIEE instances on One RCU Schemas

Hello ,
I need some help.
I am planning to install Database(DB1) on one machine and OBIEE(OB1) on the other machine and OBIEE 2(OB2) will be my back up machine for disater recovery.
First i will install OB1 by using the DB1 and that works fine.
now i can i use the same DB1 for installing OB2.?
if not please suggest me a way to make this work.
Please help me out
Thanks.

Hello,
While it is possible to share the MDS schema,
you have to create one BIPLATORM schema for each instance you install !
You can refer to http://docs.oracle.com/cd/E23943_01/bi.1111/e10539/c3_requrmnts.htm#BABBICDA for details...
Kind Regards,
Roman

Two clusterware homes on one machine?

I want to install a test environment for 11g RAC.
I have a test environment with 10g RAC, and to avoid requesting new machines I want to install 11g on same two nodes.
I know that I can have 10g and 11g databases on top of 11g clusterware, but I want to do something a bit different.
I'd like to have 11g DB on 11g clusterware and 10g db on 10g clusterware, by installing two clusterwares in two different clusterware homes on the same machine.
Any reason this will not work?

Well clusterware exists on disk as a set of files and entries in confguration files etc. you'd have to rename - /etc/oracle and also poke about inside /etc/inittab amongst other changes.
It would be easier to base your system on Oracle Clusterware 11g
Philip...

Can i have two iTunes accounts on one machine

i have recently moved in with my partner and we both have our own iTunes accounts. is there a way to have both these accounts linked so that they can be kept seperate and still sync them both to our iPhones from one iMac. it is important that they are kept seperate as we have verry different tastes in music i want to be able to re split them should i need to.

alfont01 wrote.
my Question was if its possible to link two iTunes accounts to one OSX user account?
iTunes accounts are not linked to an OS X user account..

Install two Process Server on one machine

Similar Messages

Maybe you are looking for