Install usb 3 express card

I installed a Rocketfish usb express card today. The instructions say to connect a 4 pin floppy power plug onto it. My computer has this plug, but the wires don't reach to the usb card. The card still works without this plug connected anyway. ( I'm a little disappointed though, it's only about twice as fast as the usb 2) Will this be OK without the power plug connected?
Solved!
Go to Solution.

john54981 wrote:
I'm a little disappointed though, it's only about twice as fast as the usb 2
I had a similar experience (2x).
I got myself USB3 expresscard on my laptops. You really notice the performance change on quad core compared to my dual core..

Similar Messages

Spectrum Expert - USB or Express Card

The Spectrum Expert is a great tool but the problem is to find a notebook with a PC-Card / PCMCIA slot.
I know that there are adapters available for EC to PC-Card but I think this is not a solution for customers.
I didn't find any information on the Cisco website about an alternative.
Question: When will be a Spectrum Expert Card available with USB or EC connector?

Hi Irina and Scott,
I know the AP SE-Connect feature but we need a portable solution.
Cisco should think about a USB or Express Card solution.
The APs are working with the Spectrum Expert and it will be hard to explain to a customer that he should use a 3rd party solution to get a mobile solution.
Thanks and best regards,
Carsten

USB to Express Card adapter/Express Card to Firewire

Macbook Air October 2010.
Comes with two USB 2.0 ports
Can I do the following?
- Connect USB to Express Card adapter
- Connect the Express Card port to a Firewire adapter
- Connect MiniDV camcorder to Firewire port

Also... as they went through the trouble to specifically indicate the compatible cards, I would imagine there are known incompatibilities with other card types. None of the cards they list would have difficulty over USB. Each of these cards already have similar counterparts that are available to connect directly to USB (vs. using an express card). This would seem most useful for people that may already have express cards that they use in other notebooks so they could use them in a machine without an express card slot... otherwise I would imagine people would just get the USB versions of these devices. USB hubs can obviously connect directly to a USB port, memory card readers are also available for connecting directly to a USB port. RS232 is pretty dated and USB can easily handle RS 232 throughput. I'm not exactly sure what a printer card is... but printers generally connect via USB (or parallel in older machines)... again... very easy for USB to handle. In order for it to work with firewire, they would have to have a hardware translator built into it. I'm sure they would list firewire if it was an option.

Firewire Solution? USB To Express Card Adapter Cable + Firewire Expresscard

Has anyone tried this as a possible solution for getting firewire on their macbook 13.3 unibody? In theory it would seem that you could use this USB To Express Card Adapter Cable and plug in a firewire expesscard. Anyone tried it?
http://usb.brando.com.hk/mini-usb-to-express-card-adapter-cable_p00783c042d015.h tml

Also... as they went through the trouble to specifically indicate the compatible cards, I would imagine there are known incompatibilities with other card types. None of the cards they list would have difficulty over USB. Each of these cards already have similar counterparts that are available to connect directly to USB (vs. using an express card). This would seem most useful for people that may already have express cards that they use in other notebooks so they could use them in a machine without an express card slot... otherwise I would imagine people would just get the USB versions of these devices. USB hubs can obviously connect directly to a USB port, memory card readers are also available for connecting directly to a USB port. RS232 is pretty dated and USB can easily handle RS 232 throughput. I'm not exactly sure what a printer card is... but printers generally connect via USB (or parallel in older machines)... again... very easy for USB to handle. In order for it to work with firewire, they would have to have a hardware translator built into it. I'm sure they would list firewire if it was an option.

USB or Express card so

Hi,
I've got a notebook which I use for gaming and I was hoping to get a USB or express card sound card in order to improve my sound quality and take the sound processing load off of the CPU while gaming. If I understand it correctly the x-fi expresscard doesn't actually do any sound processing it's self (it is all still done by the CPU). Does creative have any other USB or express card soundcards which actually have a dedicated processing chip?

remisbowman, Welcome to the discussion area!
Neither the AirPort Express (AX) nor the AirPort Extreme base station (AEBS) support any type of USB modems, USB networking card, nor USB networking in general.
It won't work.

USB PCI-Express Card half working???

I just purchased and installed a SYBA PCI-Express USB 2.0 5 Ports Controller Card (Model SD-PEX-NEC5U) http://www.newegg.com/Product/Product.aspx?Item=N82E16812186010&Tpk=SD-PEX-NEC5U
I think it's half-way working. I did some researching prior to my purchase and I was under the impression that the Mac Pro (2006) could accept any PCI-express card. I have my Kensington USB bluetooth adapter plugged in (to the internal port) and it powers the adapter light and both my wireless mouse and wireless keyboard work perfectly. However any of the devices I plugged into the rear 4 ports are not working... (ie my Western Digital 1 TB hard drive that has 2 partitions on - one for Time machine backups and one for regular storage)
According to the Syba website, Mac OSX is not listed as a supported OS. The card came with a drivers disc but doesn't have any Syba drivers on it... tons of other manufacturers.
Can anyone offer advice about installing drivers or "adding hardware" (a la Windows)? Again, it's working with my bluetooth... so whats up with my hard drive?

A safe place to check and start your research is OWC.
http://eshop.macsales.com/shop/firewire/add-ons-and-hubs/pci-pcmcia-cards
As for MyBook - they can be iffy; if a drive fails, it is built into the case, so I prefer to buy cases with USB/FW and that you can install a drive yourself, even if comes with one.
USB: when there is FireWire and you can easily add SATA PCIe, yes they cost more but then they can drive multiple drives at full performance too.
When you buy generic cards, see if they use the same chipset as found in Sonnet Allegro and others.
Then check
http://www.xlr8yourmac.com/ for reports in their upgrade database and articles.
And no, it requires PCIe, but not just any (and even PC with Windows 7, some cards can also be problem).

USB/eSata express card not working on stock kernel

Hello everyone,
I have a weird problem and I don't seem to find any solution by myself. Let me give you some background info on what I plan to do.
I purchased an express card to eSata/USB 3.0 adapter and want to make it work on my laptops. Precisely, it is this card: http://www.amazon.de/Notebook-Express-C … B007F8TXZ8
1: Lenovo X200s (1,6GHz) running Ubuntu 14.04 amd64
2: Lenovo X200s (1,6GHz) running Debian 7 amd64
3: Lenovo X200T (1,6GHz) running ArchLinux amd64
The card does work fine only on the Ubuntu machine. I would like to make it run on the two other ones as well. I thought I might get help here getting it to work on machine 3 and then transfer the results to machine 2. What really matters to me is eSata, btw, I do not even have a USB 3.0 device to test with.
First of all, here's what happens when I plug the card into machine 1:
user@1-ubuntu:~$ uname -r
3.13.0-39-generic
user@1-ubuntu:~$ dmesg | tail -n 44 # that's where it begins
[ 1953.576472] pciehp 0000:00:1c.3:pcie04: Card present on Slot(3)
[ 1953.728077] pci 0000:05:00.0: [1b21:1042] type 00 class 0x0c0330
[ 1953.728119] pci 0000:05:00.0: reg 0x10: [mem 0x00000000-0x00007fff 64bit]
[ 1953.728304] pci 0000:05:00.0: PME# supported from D3hot
[ 1953.736062] pci 0000:05:00.0: BAR 0: assigned [mem 0xf0000000-0xf0007fff 64bit]
[ 1953.736087] pcieport 0000:00:1c.3: PCI bridge to [bus 05-0c]
[ 1953.736092] pcieport 0000:00:1c.3: bridge window [io 0x2000-0x2fff]
[ 1953.736098] pcieport 0000:00:1c.3: bridge window [mem 0xf0000000-0xf1ffffff]
[ 1953.736104] pcieport 0000:00:1c.3: bridge window [mem 0xf2900000-0xf29fffff 64bit pref]
[ 1953.736133] pci 0000:05:00.0: no hotplug settings from platform
[ 1953.736143] pci 0000:05:00.0: enabling device (0000 -> 0002)
[ 1953.736398] xhci_hcd 0000:05:00.0: xHCI Host Controller
[ 1953.736406] xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 9
[ 1953.743621] xhci_hcd 0000:05:00.0: irq 46 for MSI/MSI-X
[ 1953.743629] xhci_hcd 0000:05:00.0: irq 49 for MSI/MSI-X
[ 1953.743635] xhci_hcd 0000:05:00.0: irq 50 for MSI/MSI-X
[ 1953.743784] usb usb9: New USB device found, idVendor=1d6b, idProduct=0002
[ 1953.743788] usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1953.743791] usb usb9: Product: xHCI Host Controller
[ 1953.743794] usb usb9: Manufacturer: Linux 3.13.0-39-generic xhci_hcd
[ 1953.743796] usb usb9: SerialNumber: 0000:05:00.0
[ 1953.743973] hub 9-0:1.0: USB hub found
[ 1953.743990] hub 9-0:1.0: 2 ports detected
[ 1953.744147] xhci_hcd 0000:05:00.0: xHCI Host Controller
[ 1953.744153] xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 10
[ 1953.744218] usb usb10: New USB device found, idVendor=1d6b, idProduct=0003
[ 1953.744221] usb usb10: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1953.744224] usb usb10: Product: xHCI Host Controller
[ 1953.744227] usb usb10: Manufacturer: Linux 3.13.0-39-generic xhci_hcd
[ 1953.744229] usb usb10: SerialNumber: 0000:05:00.0
[ 1953.744366] hub 10-0:1.0: USB hub found
[ 1953.744383] hub 10-0:1.0: 2 ports detected
[ 1954.447851] usb 10-1: new SuperSpeed USB device number 2 using xhci_hcd
[ 1954.460505] usb 10-1: Parent hub missing LPM exit latency info. Power management will be impacted.
[ 1954.461215] usb 10-1: New USB device found, idVendor=174c, idProduct=5106
[ 1954.461219] usb 10-1: New USB device strings: Mfr=2, Product=3, SerialNumber=1
[ 1954.461222] usb 10-1: Product: AS2105
[ 1954.461225] usb 10-1: Manufacturer: ASMedia
[ 1954.461228] usb 10-1: SerialNumber: 00000000000000000000
[ 1954.463146] usb-storage 10-1:1.0: USB Mass Storage device detected
[ 1954.463279] scsi7 : usb-storage 10-1:1.0
[ 1955.460385] scsi 7:0:0:0: Direct-Access ASMT 2105 0 PQ: 0 ANSI: 5
[ 1955.465099] sd 7:0:0:0: Attached scsi generic sg1 type 0
[ 1955.466483] sd 7:0:0:0: [sdb] Attached SCSI removable disk
I wouldn't know of any attached disks, and neither does it show up. Note that it is only the card I plugged in, no hard drive attached to it.
hburg1234@packrehsel:~$ lspci -k
00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 07)
Subsystem: Lenovo Device 20e0
Kernel driver in use: agpgart-intel
00:02.0 VGA compatible controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07)
Subsystem: Lenovo Device 20e4
Kernel driver in use: i915
00:02.1 Display controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07)
Subsystem: Lenovo Device 20e4
00:03.0 Communication controller: Intel Corporation Mobile 4 Series Chipset MEI Controller (rev 07)
Subsystem: Lenovo Device 20e6
Kernel driver in use: mei_me
00:03.3 Serial controller: Intel Corporation Mobile 4 Series Chipset AMT SOL Redirection (rev 07)
Subsystem: Lenovo Device 20ec
Kernel driver in use: serial
00:19.0 Ethernet controller: Intel Corporation 82567LM Gigabit Network Connection (rev 03)
Subsystem: Lenovo Device 20ee
Kernel driver in use: e1000e
00:1a.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 03)
Subsystem: Lenovo Device 20f0
Kernel driver in use: uhci_hcd
00:1a.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 03)
Subsystem: Lenovo Device 20f0
Kernel driver in use: uhci_hcd
00:1a.2 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 (rev 03)
Subsystem: Lenovo Device 20f0
Kernel driver in use: uhci_hcd
00:1a.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 03)
Subsystem: Lenovo Device 20f1
Kernel driver in use: ehci-pci
00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 03)
Subsystem: Lenovo Device 20f2
Kernel driver in use: snd_hda_intel
00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 (rev 03)
Kernel driver in use: pcieport
00:1c.1 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 2 (rev 03)
Kernel driver in use: pcieport
00:1c.3 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 4 (rev 03)
Kernel driver in use: pcieport
00:1d.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 03)
Subsystem: Lenovo Device 20f0
Kernel driver in use: uhci_hcd
00:1d.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 03)
Subsystem: Lenovo Device 20f0
Kernel driver in use: uhci_hcd
00:1d.2 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 03)
Subsystem: Lenovo Device 20f0
Kernel driver in use: uhci_hcd
00:1d.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 03)
Subsystem: Lenovo Device 20f1
Kernel driver in use: ehci-pci
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 93)
00:1f.0 ISA bridge: Intel Corporation ICH9M-E LPC Interface Controller (rev 03)
Subsystem: Lenovo Device 20f5
Kernel driver in use: lpc_ich
00:1f.2 SATA controller: Intel Corporation 82801IBM/IEM (ICH9M/ICH9M-E) 4 port SATA Controller [AHCI mode] (rev 03)
Subsystem: Lenovo Device 20f8
Kernel driver in use: ahci
00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller (rev 03)
Subsystem: Lenovo Device 20f9
03:00.0 Network controller: Intel Corporation PRO/Wireless 5100 AGN [Shiloh] Network Connection
Subsystem: Intel Corporation WiFi Link 5100 AGN
Kernel driver in use: iwlwifi
05:00.0 USB controller: ASMedia Technology Inc. ASM1042 SuperSpeed USB Host Controller
Subsystem: Device 174c:2104
Kernel driver in use: xhci_hcd
The last one seems to be important to me, so here's a verbose output on that one.
user@1-ubuntu:~$ lspci -v | tail -n 8
05:00.0 USB controller: ASMedia Technology Inc. ASM1042 SuperSpeed USB Host Controller (prog-if 30 [XHCI])
Subsystem: Device 174c:2104
Physical Slot: 3
Flags: bus master, fast devsel, latency 0, IRQ 19
Memory at f0000000 (64-bit, non-prefetchable) [size=32K]
Capabilities: <access denied>
Kernel driver in use: xhci_hcd
user@1-ubuntu:~$ sudo udevadm monitor -k
monitor will print the received events for:
KERNEL - the kernel uevent
KERNEL[2585.956558] add /devices/pci0000:00/0000:00:1c.3/0000:05:00.0 (pci)
KERNEL[2585.972086] add /devices/pci0000:00/0000:00:1c.3/0000:05:00.0/usb9 (usb)
KERNEL[2585.972116] add /devices/pci0000:00/0000:00:1c.3/0000:05:00.0/usb9/9-0:1.0 (usb)
KERNEL[2585.975736] add /devices/pci0000:00/0000:00:1c.3/0000:05:00.0/usb10 (usb)
KERNEL[2585.975763] add /devices/pci0000:00/0000:00:1c.3/0000:05:00.0/usb10/10-0:1.0 (usb)
KERNEL[2586.689218] add /devices/pci0000:00/0000:00:1c.3/0000:05:00.0/usb10/10-1 (usb)
KERNEL[2586.690935] add /devices/pci0000:00/0000:00:1c.3/0000:05:00.0/usb10/10-1/10-1:1.0 (usb)
KERNEL[2586.695723] add /devices/pci0000:00/0000:00:1c.3/0000:05:00.0/usb10/10-1/10-1:1.0/host9 (scsi)
KERNEL[2586.695757] add /devices/pci0000:00/0000:00:1c.3/0000:05:00.0/usb10/10-1/10-1:1.0/host9/scsi_host/host9 (scsi_host)
KERNEL[2587.692633] add /devices/pci0000:00/0000:00:1c.3/0000:05:00.0/usb10/10-1/10-1:1.0/host9/target9:0:0 (scsi)
KERNEL[2587.692667] add /devices/pci0000:00/0000:00:1c.3/0000:05:00.0/usb10/10-1/10-1:1.0/host9/target9:0:0/9:0:0:0 (scsi)
KERNEL[2587.692691] add /devices/pci0000:00/0000:00:1c.3/0000:05:00.0/usb10/10-1/10-1:1.0/host9/target9:0:0/9:0:0:0/scsi_disk/9:0:0:0 (scsi_disk)
KERNEL[2587.692708] add /devices/pci0000:00/0000:00:1c.3/0000:05:00.0/usb10/10-1/10-1:1.0/host9/target9:0:0/9:0:0:0/scsi_device/9:0:0:0 (scsi_device)
KERNEL[2587.692824] add /devices/pci0000:00/0000:00:1c.3/0000:05:00.0/usb10/10-1/10-1:1.0/host9/target9:0:0/9:0:0:0/scsi_generic/sg1 (scsi_generic)
KERNEL[2587.692898] add /devices/pci0000:00/0000:00:1c.3/0000:05:00.0/usb10/10-1/10-1:1.0/host9/target9:0:0/9:0:0:0/bsg/9:0:0:0 (bsg)
KERNEL[2587.699636] add /devices/virtual/bdi/8:16 (bdi)
KERNEL[2587.699771] add /devices/pci0000:00/0000:00:1c.3/0000:05:00.0/usb10/10-1/10-1:1.0/host9/target9:0:0/9:0:0:0/block/sdb (block)
KERNEL[2587.703694] change /devices/pci0000:00/0000:00:1c.3/0000:05:00.0/usb10/10-1/10-1:1.0/host9/target9:0:0/9:0:0:0/block/sdb (block)
KERNEL[2587.709178] change /devices/pci0000:00/0000:00:1c.3/0000:05:00.0/usb10/10-1/10-1:1.0/host9/target9:0:0/9:0:0:0/block/sdb (block)
Apart from the supposedly found block device (can't judge) I am not sure if there is anything that is really eSata specific and not USB 3.0 related.
So far what I think I can tell from the output is that the modules
pciehp pci pcieport
seem to be dealing with the express card as such whereas
xhci_hcd
takes care of USB 3.0. I cannot see any clear reference to the eSata connector, which might not be surprising if the bus is just passed through (again: not sure).
For completeness' sake here comes the output of
user@1-ubuntu:~$ lsmod | tee before
Module Size Used by
ctr 13049 1
ccm 17773 1
pci_stub 12622 1
vboxpci 23194 0
vboxnetadp 25670 0
vboxnetflt 27613 0
vboxdrv 339502 3 vboxnetadp,vboxnetflt,vboxpci
cuse 13445 3
dm_crypt 23177 1
btusb 32412 0
cdc_ether 14351 0
usbnet 43913 1 cdc_ether
cdc_acm 28803 0
mii 13934 1 usbnet
cdc_wdm 19053 0
rfcomm 69160 8
bnep 19624 2
bluetooth 391136 22 bnep,btusb,rfcomm
binfmt_misc 17468 1
coretemp 13435 0
kvm_intel 143148 0
kvm 451729 1 kvm_intel
thinkpad_acpi 81013 0
nvram 14411 1 thinkpad_acpi
serio_raw 13462 0
arc4 12608 2
snd_seq_midi 13324 0
snd_seq_midi_event 14899 1 snd_seq_midi
snd_hda_codec_conexant 57441 1
iwldvm 232285 0
snd_hda_intel 56451 3
mac80211 630653 1 iwldvm
snd_hda_codec 192906 2 snd_hda_codec_conexant,snd_hda_intel
snd_hwdep 13602 1 snd_hda_codec
snd_rawmidi 30144 1 snd_seq_midi
lpc_ich 21080 0
iwlwifi 169932 1 iwldvm
snd_seq 61560 2 snd_seq_midi_event,snd_seq_midi
snd_pcm 102099 2 snd_hda_codec,snd_hda_intel
mei_me 18627 0
cfg80211 484040 3 iwlwifi,mac80211,iwldvm
snd_page_alloc 18710 2 snd_pcm,snd_hda_intel
mei 82276 1 mei_me
snd_seq_device 14497 3 snd_seq,snd_rawmidi,snd_seq_midi
snd_timer 29482 2 snd_pcm,snd_seq
snd 69322 17 snd_hwdep,snd_timer,snd_hda_codec_conexant,snd_pcm,snd_seq,snd_rawmidi,snd_hda_codec,snd_hda_intel,thinkpad_acpi,snd_seq_device,snd_seq_midi
soundcore 12680 1 snd
parport_pc 32701 0
ppdev 17671 0
mac_hid 13205 0
tp_smapi 28367 0
thinkpad_ec 14449 1 tp_smapi
lp 17759 0
parport 42348 3 lp,ppdev,parport_pc
i915 783961 2
psmouse 106714 0
ahci 25819 3
libahci 32716 1 ahci
i2c_algo_bit 13413 1 i915
e1000e 254433 0
drm_kms_helper 55071 1 i915
drm 303102 3 i915,drm_kms_helper
ptp 18933 1 e1000e
pps_core 19382 1 ptp
video 19476 1 i915
wmi 19177 0
and a list of the newly loaded modules:
user@1-ubuntu:~$ diff before <(lsmod)
1a2
> usb_storage 62209 0
Now, on my Arch machine the situation is as follows when the card is plugged in:
user@3-arch:~$ uname -r
3.17.2-1-ARCH
user@3-arch:~$ sudo udevadm monitor -k
monitor will print the received events for:
KERNEL - the kernel uevent
user@3-arch:~$ lsmod
Module Size Used by
sr_mod 21903 0
cdrom 47479 1 sr_mod
hid_generic 12393 0
usbhid 48603 0
hid 102220 2 hid_generic,usbhid
cdc_ether 12564 0
usbnet 34978 1 cdc_ether
cdc_acm 30362 0
cdc_wdm 17427 0
mii 12675 1 usbnet
ctr 12927 0
ccm 17534 0
fuse 87410 3
joydev 17063 0
wacom_w8001 12706 0
serport 12842 1
mousedev 17272 0
iTCO_wdt 12831 0
iTCO_vendor_support 12649 1 iTCO_wdt
coretemp 12820 0
kvm 417429 0
pcspkr 12595 0
psmouse 107214 0
evdev 21544 20
mac_hid 12633 0
serio_raw 12849 0
i2c_i801 16965 0
snd_hda_codec_conexant 21835 1
snd_hda_codec_generic 63126 1 snd_hda_codec_conexant
arc4 12536 2
iwldvm 184847 0
mac80211 604456 1 iwldvm
i915 905750 2
lpc_ich 20768 0
iwlwifi 156837 1 iwldvm
snd_hda_intel 26387 0
snd_hda_controller 26938 1 snd_hda_intel
cfg80211 445286 3 iwlwifi,mac80211,iwldvm
thinkpad_acpi 69074 0
e1000e 215686 0
snd_hda_codec 108536 4 snd_hda_codec_conexant,snd_hda_codec_generic,snd_hda_intel,snd_hda_controller
drm_kms_helper 80934 1 i915
shpchp 35210 0
snd_hwdep 17244 1 snd_hda_codec
snd_pcm 88487 3 snd_hda_codec,snd_hda_intel,snd_hda_controller
ptp 17692 1 e1000e
pps_core 17225 1 ptp
snd_timer 26614 1 snd_pcm
wmi 17339 0
drm 259106 4 i915,drm_kms_helper
nvram 13034 1 thinkpad_acpi
thermal 17559 0
snd 73436 8 snd_hwdep,snd_timer,snd_hda_codec_conexant,snd_pcm,snd_hda_codec_generic,snd_hda_codec,snd_hda_intel,thinkpad_acpi
soundcore 13031 2 snd,snd_hda_codec
led_class 12859 2 iwldvm,thinkpad_acpi
rfkill 18867 3 cfg80211,thinkpad_acpi
ac 12715 0
hwmon 12930 2 coretemp,thinkpad_acpi
acpi_cpufreq 17218 1
battery 17452 0
i2c_algo_bit 12744 1 i915
mei_me 17900 0
tpm_tis 17182 0
i2c_core 50152 5 drm,i915,i2c_i801,drm_kms_helper,i2c_algo_bit
tpm 31467 1 tpm_tis
mei 75079 1 mei_me
intel_agp 17432 0
intel_gtt 17848 3 i915,intel_agp
video 18043 1 i915
processor 27777 3 acpi_cpufreq
button 12953 1 i915
sch_fq_codel 17343 6
tp_smapi 27621 0
thinkpad_ec 12813 1 tp_smapi
ext4 497696 3
crc16 12343 1 ext4
mbcache 17171 1 ext4
jbd2 86417 1 ext4
sha256_ssse3 25692 2
sha256_generic 16804 1 sha256_ssse3
ecb 12737 0
cbc 12696 1
algif_skcipher 17051 0
af_alg 12988 1 algif_skcipher
dm_crypt 22551 1
dm_mod 93490 15 dm_crypt
sd_mod 44398 3
crct10dif_generic 12581 1
crc_t10dif 12431 1 sd_mod
crct10dif_common 12356 2 crct10dif_generic,crc_t10dif
atkbd 22254 0
libps2 12739 2 atkbd,psmouse
ata_generic 12490 0
ahci 33291 2
libahci 27158 1 ahci
pata_acpi 12771 0
uhci_hcd 43507 0
ehci_pci 12512 0
ehci_hcd 69939 1 ehci_pci
libata 181518 4 ahci,pata_acpi,libahci,ata_generic
usbcore 199381 9 uhci_hcd,ehci_hcd,ehci_pci,usbhid,usbnet,cdc_acm,cdc_wdm,cdc_ether
usb_common 12440 1 usbcore
scsi_mod 147543 3 libata,sd_mod,sr_mod
i8042 18002 1 libps2
serio 18282 9 serio_raw,atkbd,i8042,serport,wacom_w8001,psmouse
Sticking to my suspicion that this might just be a USB related issue and eSata might still work due to some sort of passthrough, I attached the very eSata drive that I could mount on Ubuntu. It did not work.
I then researched and found this blog post: http://okomestudio.net/biboroku/?p=1360
So I downloaded the pkgbuild for the arch linux core kernel and checked the config. It matched the recommendations.
Another hint I found was to unload acpiphp and force-reload it. However, this tip does not seem to apply to the arch kernel:
[user@3-arch:~$ sudo rmmod acpiphp
rmmod: ERROR: Module acpiphp is builtin.
Anyone any idea on how to make the card work?
Thank you!
Last edited by archery1234 (2014-11-15 10:46:35)

For anyone else seeking help on that: Card slot was deactivated in 2/3 Bioses.

Installing USB 2 flash card drivers manually

I have purchased a USB 2/Firewire 400 HDD that also has a flashcard reader/USB 2 Hub built into it. The driver installer, that installs the flashcard reader and drivers for an Alcor chipset dosn't work.
I need help in manually placing the drivers or maby some one can point me in the direction of a site that has an installer for Alcor drivers that works with Tiger?
The file names on the drivers I currently have are "AlcorUSBStorageShim" & "AlcorUSBStorageClassDriver".
I just don't know were to put them?
The icons on the files have the USB logo on them and the info window says that the files are "Unix executable File (PowerPC).
Thanks for any help!
G5 Quad Core 2.5GHz 6GB RAM Mac OS X (10.4.6) [storage] X RAID's : [capture] Io : [decks] Betacam SP, S-VHS, DSR-11

I suggest you contact the tech support for that disk drive's manufacturer to find out why their drivers are not working.

802.11N USB/Express Cards

Hi. I have 2 minis, an iMac G5 and a MacBook Pro Core Duo...none of which have 802.11N capabilities. I would like to find external wireless cards that are USB and express card based that will work with OS X. Does anyone have a recommendation?

Yes, check out QuickerTek.

Why won't my eMc boot when I install a new Airport Express Card?

I just tried to install an Airport Express Card into my eMac. After each time I reseated and then turned on the power, my eMac would not boot. It boots fine without the card, any ideas or suggestions?

There's a possibility that the card id defective and should be exchanged, but a stronger possibility that the Airport Extreme card (Airport Express is a different, external device) isn't actually seated quite all the way. Many posters in the eMac forums have noted that it takes a suprising amount of force to fully seat the card and to get it to move the last millimeter or whatever into the slot. You need to press the card to just short of where the eMac chassis starts moving away from you on your desk or table.

Belkin firewire express card help

I need installing the belkin usb/firewire express card. Everytime I plug it in, the mbp tries to install it, then it locks up my entire computer.
I'm trying to import video from a camcorder that uses a firewiere 400 cable. I thought I could use this express card to import the video via firewire 400 but it doesn't look like it's working.
any thoughts?
thanks.

Can't help you with a card, but have you tried Firewire 9 to 4 pin cable (or converter)?
Here is one:
http://www.monoprice.com/products/product.asp?cid=103&cp_id=10301&cs_id=1030104&pid=328&seq=1&format=2
You shouldn't need the express card - FW 800 is backwards compatible with FW 400 and should work as long as you have the physical connections correct. I say should because some folks have had problems with FW 400 devices on FW 800, so it's not necessarily a sure thing...

Firewire PCI Express cards

I'm sorry if this is semi-redundant with the usb pci express card page already posted, but I was wondering if anyone knew if either of these would work on the Mac Pro:
http://www.aaxeon.com/products/Productdetail.aspx?cate=8&modelno=FWB3414#specs
http://www.macmall.com/macmall/shop/detail.asp?dpno=709052
If so, does anyone have any experience with either or know which is better? Any help would be greatly appreciated. Thank you in advance!
Mac Pro

I checked OWC and they are saying Aaxeon for any PCIe Mac (dual core, quad, and Mac Pro). SIIG is probably, as usual, just reselling and putting their name on someone else's (and probably someone else's firmware, too).
I don't like the "20MB/sec writes based on manuf's tests" part though. But I probably will pick one up nonetheless.

Can i install a usb 3.0 pci express card in a mac pro 2008

Can I install a PCI express USB 3.0 card in my Mac Pro 2008? Will it support the higher speed?

No.

Is there express card slot to install eSata ?

Hi,
Product Name: pavilion dv6
Operating System: Microsoft Windows 7 (64-bit)
Product name: HP Pavilion dv6-6093ex Entertainment Notebook PC support.
Product number: LM610EA#A2N
According to the pictures of my product I posted below , there is no express card slot. So eSata is out. And as I was said, there is no real functional difference between an enclosure and a cable. Is there a very good option to have eStat port?

Thanks a lot,
As you said my HP Pavilion dv6-6093ex Entertainment Notebook PC support does NOT have [B]eSATA/USB combination port. So, I really don't see any eSata port on the case of my laptop, such as USB3, USB2 ports, and other connectors, such VGA, and HDMI, and so on.
However, my question is as long as my my HP Pavilion dv6-6093ex Entertainment Notebook PC support does NOT have [B]eSATA/USB combination port, then I don't know if my existing internal Toshiba HDD drive is connected to an eSata interface port of my laptop or not.
Moreover, What I know is that an eSata port can be a port inside a PC, and not shown in the left/right side of the case of a PC like USB3/2. As a result, if I want to convert my existing internal Toshiba HDD drive as an external HDD to be connected to a USB 3.0/2.0 port, how could I do as long as my existing internal Toshiba HDD drive has only eSata interface port, or otherwise it cannot be installed inside my laptop via eSata port.

USB 3.0 express card for Macbook Pro on Lion?

Does anybody know a USB 3.0 express card that works with Macbook Pro using Lion?
I just got an IOGear express card from Amazon that did NOT make it clear that it was Windows only.
Only after I tried to install it was it painfully obvious it was Windows only.
Thanks

Hey mark327 do you know if i can use this card as well with this driver?
http://www.ebay.com/itm/170792739691?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m143 8.l2649#ht_2705wt_956
NEC Chipset Renesas uPD720202.

Install usb 3 express card

Similar Messages

Maybe you are looking for