Install Video Encoder on 64bit?
Hi!
Has anyone managed to install the Flash Video Encoder on a
Win XP 64 bit system?
When trying to start the program I get asked for the .msi
file, when I point it to that I get an error 1706, no valid source
could be found for the product Macromedia Flash 8 video Encoder.
Windows installer cannot continue.
This sounds like a problem we had back in Flash 8 involving a
QuickTime update.. check this older technote and see if it applies:
"Flash 8 Emerging Issues"
http://www.adobe.com/go/tn_18889
Similar Messages
-
Trouble getting video encoder to install
I installed the demo version of Flash 8, and the authoring
program installed fine. However, when I try to run the video
encoder, I get a message saying I don't have access to the
Config.msi file. My IT contact can't even find that file. Does
anyone know how to fix this?Maybe this will help you:
http://www.adobe.com/cfusion/knowledgebase/index.cfm?event=view&id=KC.tn_18889&extid=tn_18 889&dialogID=53436396&iterationID=1&sessionID=48305c2a631b4f755465&stateID=1+0+53430574&mo de=simple
Christian -
I have an Adobe Id. How can I download Adobe Media Encoder CC 64bit?
I can't find a link to download and install Adobe Media Encoder CC 64bit.
I can only find a link to update Adobe Media Encoder here: Adobe - Adobe Media Encoder : For WindowsWhy does Adobe Media Encoder keep crashing? How to fix Media encoder in TWO seconds! :) - YouTube
-
Can't re-install iTunes on Windows7 64bit PC.
Can't re-install iTunes on Windows7 64bit PC. Tried uninstalling Apple programs in correct order and starting again with new download but I can't install Apple App support which means iTunes won't work. May be something to do with microsoft visual c++ redistributable package x86 which I cannot repair.
Help please!
Thanks
MikeA hint from another thread suggests that temporarily disabling the Windows Firewall may help with the installation of the C++ Redistributable components.
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
The further information area has direct links to the current and recent builds in case you have problems downloading, need to revert to an older version or want to try the iTunes for Windows (64-bit - for older video cards) release as a workaround for performance issues or compatibility with third party software.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
tt2 -
I cannot run Adobe Video Encoder, I get this error: ' Adobe Media Encoder CS6 6.0.1 Update Installation failed. Error Code: U44M2P7'
Hi
Uninstall the Adobe Application manager from your computer.
and download the latest version of the AAM from the below mentioned sites.
http://www.adobe.com/support/downloads/detail.jsp?ftpID=4774- For Mac
http://www.adobe.com/support/downloads/detail.jsp?ftpID=4773 - For Windows
Once installed , Then try to update the application by launching the application and Help--> Update
Hope It Helps
Thanks -
Flash Video Encoder conflict with Safari for Windows
I installed Safari for Windows (AMD/Windows XP) without the
options (no Bonjour) and found that it disabled Adobe Flash Video
Encoder (tries to reinstall, can't find msi, can't reinstall from
disk, 1 keeps asking for disk 1). Uninstalled Quicktime, didn't
help. Uninstalled Safari, rebooted, still can't get Flash Encoder
working.timtro;
Many (myself included)won't be installing safari/win until
the final
release, and I suspect Adobe won't test much until then
either, so it's
probably best to report this to apple as a possible bug with
their
beta. -Tom Unger -
FLV video encoder for intel macs
The Flash 8 Video Encoder is installed on the system - iMac
intel duocore (the most recent version) and OS X 10.4.8 - but the
encoder does not show up in Quicktime Pro. The same thing works
fine on Powerbook G4.
Is there a special Video encoder for mac intel
systems?Try Sorenson Squeeze Suite 4.5
Click Here for
Reviews
I've tested it in a trial version for converting my DVDs and
etc. on my personal website.
Click Here for some
SAMPLES I did. -
The Adobe product that installed Media Encoder has not activated
My Adobe Media Encoder CS4 was working perfectly.
I even exported a video one morning and that same afternoon it refused and gave me the following message:
"Thank you for using Adobe Media Encoder CS4. The Adobe product that installed Media Encoder has not activated.
Please launch and activate that Adobe product before continuing to use Media Encoder"
I reinstalled a couple of times, but nothing changed.
I uninstalled and installed CS5, it launched once then gave me the same message all over again.
I even tried to install it on another computer and it's giving me the same result.
I have been working on this video more a month, and I can't even export it.
Can anyone help ? I have a deadline to meet
Thanks a lotHi, I've just been having the same problem but on my mac!
I have been trying to use XDCAM EX converted Mov files on my new MacBookPro with CS6. I have just completed the installation of ProRes Quictime codecs, but when I went back to try to re-open my Adobe Media Encoder, (that I was using without problem around an hour ago), I now get the same message that The-Jade was getting
"Thank you for using Adobe Media Encoder CS4. The Adobe product that installed Media Encoder has not activated.
Please launch and activate that Adobe product before continuing to use Media Encoder"
Any ideas?
Thanks,
JAK -
Flash Video Encoder Question(s)
Hello,
This is the first time we've used Flash Video Encoder. We
have a video that is about 12 minutes long that is in QuickTime
format. We have added it to the FVE queue and have two questions.
1. I think we may have messed up the settings. The first time
we tried to do this conversion we tooled around in there, but then
when we tried to go back in later we receive a message that says
"Flash Video Encoder cannot find the selected file. The file may
have been moved or deleted" when we click the Settings button.
2. It takes FOREVER to convert this video. Before we stopped
it, it had run for 25 minutes and the estimated time left was over
10 hours.
Is this normal? What on earth are we doing wrong?
Thanks for your help.
GNThat is odd since I also have quicktime pro and it IS an
option:
http://www.johnkalnin.com/images/quicktime.jpg
Maybe that is something that got installed when I installed
Sorenson Squeeze. I am very sorry if that is the case. Try
downloading and installing the sorenson squeeze trial and see if
that helps. -
Flash 8 video encoder + SWF
Hi,
I need to convert some video file with the flash 8 video
encoder but i need an SWF output instead of a FLV. I know FLV is
the best for internet use but we can't integrate those type of file
in director so I really ned a swf file. I was wondering how could I
do it ...
II've tried to import the FLV in Flash 8 as an embedded video
but as the warning said the audio is not synched with the video
when i export it. Anyone have an idea how could I export a SWF
without beeing linked to the FLV ??
Thanks,try to play FLV file?
download & install FLV player,
try this:
http://www.download.com/FLV-Player/3000-2139_4-10467081.html
expecting a SWF file?
- import your flv into a flash movie & publish it -
Final Cut Pro, Flash Video Encoder & Flash Player
Well, let's get started.... I'm getting real frustrated with
Adobe. I emailed them about this problem two months ago and NEVER
got a response. This is extremely unacceptable product support. We
just purchased the Creative Suite Premium two months ago and have
never gotten Flash Video Encoder to properly encode a Quicktime
video exported from Final Cut Pro.
I have heard from a few on the Final Cut Pro forum on
Creative COW that there is a bug with this issue between Flash and
Final Cut Pro. Adobe doesn't seem to care if I report it, so that's
why I am here.
I create my program as usual, export a Quicktime file (not
reference video, but a full self-contained Quicktime). BTW, I have
Quicktime 7.2 on my Mac Pro Quad 3.0 with 8 gig of RAM. I open
Flash Video Encoder to make my flash files. Import the Quicktime
and select my settings which are custom. I set it to encode and
wait for the encoding to be done. It takes about 1 1/2 hours to
encode a 23 minute program. After the encode is finished, I check
the Flash file by opening it up. BTW, I also have installed a copy
of On2 Flix Exporter, which encodes Flash files, too. The On2 Flash
player is the only player that works. Adobe's Flash player opens
but it won't open ANY Flash files.
Has anyone seen this?When I try to import it on FCPX it says "None of the selected files or folders can be imported. Change the selection and try again." and even on Compressor it either doesn't play and fails to convert, or else it plays only a the audio but once I've completed the process the outputted file doesn't play anything.
Here's a screenshot at my different attempts to convert it. I managed to get the record the video on VLC, but I can't record the audio so I tried getting only the audio form Compressor as well, but like I said the outputted file doesn't play any audio even though it's as long as the video (36 mins approx.). -
The following error displays upon the launch of Adobe Flash
Cs3 Video Encoder:
"A required system library did not initialize properly,
Please ensure you have DirectShow 9 and QuickTime 7 or high
installed on your system."
We did however install DirectShow 9.
Are we required to install Quicktime 7?
Is there a work around solution for the Video Encoder?
Specifications:
Windows XPWhat you're looking at is SD compression, and what you are wanting is very much HD. You need to select a high definition setting in Compressor to do this.
Are you hoping to create a HD disc? Unless you go through replication (and at some considerable expense) you can't burn a HD format unless you put HD content onto a SD disc, and then it won't play on very many players... occasional computers here and there, etc.
If you want to create SD, then down-convert the video to SD and then encode it at the settings you are showing.
PS - you don't need iDVD unless you don't want much control of the process -
When I convert a WMF file with Adobe Flash CS3 Video Encoder, i'ts written "created with Flip4mac Trial
Have you tried re-installing the software on the offending computer?
-
Any2dvd assistance -- video encoding failed
Has anyone got any recent experience with any2dvd? I've already fixed three issues in the bash source (adding '-ao dummy' to the mplayer identify calls, commenting out the ghostscript errors, since I know I have the ghostscript fonts, and adding a 'k' after each -ab option, e.g. change -ab 384 to -ab 384k).
Now I'm getting the following errors every time I try run it:
any2dvd --format=ntsc -j FRED_FLYNT=slideshow.mpeg --iso=slideshow.iso --vmgm_bg=title.jpg --vmgm_audio=onlyyou.wav -a soundtrack.wav
Error: Video encoding failed for tmp_any2dvd/VTSM/vtsm1_1.mpg, file not successfully encoded!
any2dvd.log:
Creating Titleset 1 Chapter Menu(s)
Running: ppmtoy4m -n100 -F 30000:1001 -r "tmp_any2dvd/VTSM/tmp_vtsm_bg.ppm" -S 420mpeg2 2> /dev/null | mpeg2enc -a3 -q4 -4 2 -2 1 -s -M0 -f8 -n n -o "tmp_any2dvd/VTSM/tmp_vtsm.m2v" 2> "tmp_any2dvd/tmp.log"
INFO: [mpeg2enc] Signaling last frame = 99
INFO: [mpeg2enc] Enc1 99 99( 9) P q=4.00 [0% Intra]
INFO: [mpeg2enc] Sequence end reached
INFO: [mpeg2enc] Pass2 90 90( 0) I q=4.00 RETAINED
INFO: [mpeg2enc] Pass2 91 91( 1) P q=4.00 RETAINED
INFO: [mpeg2enc] Pass2 92 92( 2) P q=4.00 RETAINED
INFO: [mpeg2enc] Pass2 93 93( 3) P q=4.00 RETAINED
INFO: [mpeg2enc] Pass2 94 94( 4) P q=4.00 RETAINED
INFO: [mpeg2enc] Pass2 95 95( 5) P q=4.00 RETAINED
INFO: [mpeg2enc] Pass2 96 96( 6) P q=4.00 RETAINED
INFO: [mpeg2enc] Pass2 97 97( 7) P q=4.00 RETAINED
INFO: [mpeg2enc] Pass2 98 98( 8) P q=4.00 RETAINED
INFO: [mpeg2enc] Pass2 99 99( 9) P q=4.00 RETAINED
INFO: [mpeg2enc] Guesstimated final muxed size = 513178
Error: Video encoding failed for tmp_any2dvd/VTSM/vtsm1_1.mpg, file not successfully encoded!
I can't seem to see any errors in log. I checked the code and all the options for the command mpeg2enc seem correct.
Any ideas?
Thanks!
Scott
Last edited by firecat53 (2009-07-16 02:28:00)Video:
Codec: dvsd
Name: DVC/DV Video - MPG2
Stats: Installed
Audio:
Codec: PCM Audio
Info: 48000Hz 768 kb/s (1 chnl)
If i've recorded the wrong information let me know and i'll change it. -
I have the encoder installed on two machines. On one machine
it won't run because it can't install itself it says which seems to
be a fairly common problem. On my other machine it does run!!!!
<G> Anyway, I have tried encoding 7 different wmv files and
they all successfully encode (at least I don't get any errors. When
I try to play them on my machine the flash player starts up but all
I get is a white screen with no movie. Anywone have any
thoughts?Khoramdin wrote:
> I have got the trial version of Macromedia Flash 8
(professional). I have no
> problem running the Macromedia Flash but when I tried to
run the Macromedia
> Flash 8 Vedio Encoder for the First time, as it was
trying to install the
> Encoder it gives me an error as it cannot locate an
installation file.
>
> This is the message I am getting in the pop-up message
as the installation
> stops:
>
> The feature that you are trying to use is on the network
resource that is
> unavailable. Click OK to try again or enter an alternate
to a folder containing
> the installation package ?Macromedia Flash 8 Video
Encoder.msi? in the box
> below.
>
> User source:
>
C:\DOCUME~1\username\LOCALS~1\Temp\{2BD5C305-1B27-4D41-B690-7A61172D2FEB}\
>
common problem, happens with perfectly set up application,
regardless DEMO or
off the CD.
I and up getting ZIP of the encoder from a friend because
multiple unistall, reinstall
did not help.
Happen second time on my laptop, I got fed up and try to fix
it, can't reproduce the steps
but basically I remove QT player and Flash 8. Reinstall QT
first, than Follow by flash 8.
Tried that 4 or 5 times and eventually it start to work.
You can always use it from the program, it works within flash
File - import - import video
than pick the video and go to Progress Download From the
server.
Flash will generated the FLV automatically.
Regards
Urami
Happy New Year guys - all the best there is in the 2006
<urami>
http://www.Flashfugitive.com
</urami>
<web junk free>
http://www.firefox.com
</web junk free>
Maybe you are looking for
-
Having issues with my mac, wanted to do the "Disk repair" but it wont letme
i've been having some problems with my mac recently, some programs just keep shutting down for no reason apparently, so i though maybe i go into disk utility and tried to press Repair Disk button, but i cant because it transparent and you cant press
-
Can't send a gift even if I have credit in my account, it asks me to enter a visa o MasterCard number, how can I send a gift without giving this info.
-
System Yank Register in Vim+URxvt Without Mouse [SOLVED]
As I understand it, to use the system clipboard you have the choice of the selection or the cut buffer that are accessed through vim's * and + registers. But as far as I can tell, this feature doesn't work with the vim from the repository. Older thre
-
Quick Question (re:exporting from iMovie into iDVD)
Hello everyone! I just have a quick question for you all... (I want to see if this is normal - I'm on a deadline and this is kind of freaking me out) So, we have a 20 minute or so video in iDVD. It plays fine, etc etc. The goal is to burn it to a DVD
-
Restoring and recovering datafiles in standby database
Hi, oracle version : 8i(8.1.7.0.0) os : sun solaris I have scenerio where i lost some of the datafiles in standby database(physical standby) and i do have standby cold backup 3 months older since database size is 1TB is can i restore the the only los