Install Web Dispatcher in a Windows Cluster
Hello all,
is it possible to define an installed WebDispatcher Service. I didn't find any hints in SAP notes.
Thnaks for your help.
Regards
Franz-Josef
Hi Franz-Josef,
don´t know how you searched but I found
Note 834184 - Installing the SAP Web Dispatcher in an MSCS Environment
Markus
Similar Messages
-
Install web dispatcher on two different domain
Hi Everybody,
I'm going to install web dispatcher on DMZ, that's not the same domain as Portal domain, but it cannot realize the host name that I insert for "rdisp/mshost"
I'm guessing the problem is becuase they are in different domains, Do you have any idea that what should I do?
By the way, My portal is in Microsoft cluster environment.
Thanks,
MaryamHi Maryam,
you have to ensure that from network side everything is configured correctly that the SAP Web Dispatcher can
communicate with the message server.
The hostname configured with rdisp/mshost must be reachable with a ping command from the host the Web Dispatcher is running on .
Kind Regards
Thomas Alt -
Error while installing web dispatcher NW04S SR2
Hi there,
Get this error when installing web dispatcher.... step after selecting the kernel source...
Pls help??
ERROR 2007-01-29 14:25:23
MUT-03011 Execution of the command "C:\WINDOWS\TEMP\2\sapinst_exe.6196.1170073192\SAPCAR.exe -x -v -g -i -f D:\test/DBINDEP/SAPEXE.SAR, webdispinst.lst" finished with return code 29. Output: SAPCAR: no archives specified for extracting (error 29). There are no more files.I always setup SAP Web Dispatcher by running "sapwebdisp -bootstrap", although I haven't tried with SR2...
Cheers -
Issue while installing web dispatcher
i am trying to install web dispatcher , i am facing a issue in SAP host agent.could you please help me resolve this issue.
SAP NetWeaver 7.0 including Enhancement Package 3 > Standalone Engines > Web Dispatcher > Web Dispatcher Installation( Last error reported by the step: Installation of SAP host agent using command "C:\Program Files\sapinst_instdir\NW703\STANDALONE\AS\WI\hostagent\saphostexec.exe" -upgrade failed with return value 1. Output was:
Upgrade service [OK] No upgrade necessary [ERROR] Open of service SAPHostExec failed ( The specified service does not exist as an installed service.
Above is error
Regards,
Manoj JHello Both,
issue has been resolved . i have started saphostagent via command saphostagent -install.
it started host control.
Thank you
could you please let me steps after installing sap web dispatcher in standalone system and how map it to HTTP request.
Regards,
Manoj J -
Getting connection error after installing Web Dispatcher for JAVA engine
Hi SAP Guru's,
I have installed Web Dispatcher instance on solution manager server machine for Production JAVA portal. I am getting below error when I am trying to access Production JAVA portal.
500 Dispatching Error
Error: -26
Version: 7000
Component: HTTP_ROUTE
Date/Time: Sat Feb 05 16:18:12 2011
Module: http_route.c
Line: 3139
Server: ERPSOL_WDP_04
Error Tag:
Detail: no valid destination server available for '!ALL' rc=13
Where as I have define all suitavle parameters in Web Dispatcher instance profile
SAPSYSTEMNAME = WDP
SAPGLOBALHOST = ERPSOL
SAPSYSTEM = 04
INSTANCE_NAME = W04
DIR_CT_RUN = $(DIR_EXE_ROOT)\$(OS_UNICODE)\NTAMD64
DIR_EXECUTABLE = $(DIR_CT_RUN)
Accesssability of Message Server
rdisp/mshost = sapepjlg.pdilnoida.com
ms/http_port = 8102
Configuration for medium scenario
icm/max_conn = 500
icm/max_sockets = 1024
icm/req_queue_len = 500
icm/min_threads = 10
icm/max_threads = 50
mpi/total_size_MB = 80
SAP Web Dispatcher Ports
icm/server_port_0 = PROT=HTTP,PORT=8105
Please help on this as I have to deliver this before go live.
Regards,
BijayHi Bijay,
Please check if services /public/icman, /public/icm_info are active & accessible in SICF(in case of Dual stack system) tx.
Regards,
Neeraj -
BSP application:"Installing Web Dispatcher"
Hi All,
We have planned to install web dispathcer for Load balancing the HTTP requests, as performance of BSP applications are slow. Now we have already a Load balancing in place(SMLG).
Now will this installation of SAP web dispatcher for load balacing, have any conflicts with already present Load balance.
Thanks,
VincentHi James,
I confirm to you that I use both sapgui load blancing and HTTP load balancing with the web dispatcher on the same production R/3 system with no problems.
The necessary information to install and configure the SAP web dispatcher is available in help.sap.com.
Regards,
Olivier -
Installing Webi Rich Client on Windows 2000 PC
Hi all
I have a client who has Windows 2000 PC's and would like to install the webi rich client. I appreciate that this isn't one of the operating systems in the supported platforms document, however is there a way /workaround to install the webi rich client on a Windows 2000 PC?
Thank you for your help.
Kind regards,
DeanHi Dean,
Supported Operating System for BO XIR 3.1 and same is for Webi rich client:
Desktop Products
u2022
Windows XP SP2 Professional
u2022
Windows Vista (1)
u2022
Windows Vista SP1 (1)
u2022
Windows Server 2003 SP1 (1) (2)
u2022
Windows Server 2003 SP2 (1) (2)
u2022
Windows Server 2003 R2 (1) (2)
u2022
Windows Server 2008 (1) (2)
(1)
32-bit and 64-bit O/S editions supported
(2)
Data Center Edition, Enterprise Edition, Standard Edition , Web Edition
Server Products
u2022
Windows Server 2003 SP1 (1) (2)
u2022
Windows Server 2003 SP2 (1) (2)
u2022
Windows Server 2003 R2 (1) (2)
u2022
Windows Server 2008 (1) (2)
(1)
32-bit and 64-bit O/S editions supported
(2)
Data Center Edition, Enterprise Edition, Standard Edition , Web Edition
BusinessObjects and Microsoft Critical Patches
BusinessObjects supports the install of all Microsoft critical patches for
Hope this helps you.
Regards,
Deepti Bajpai -
refer to /iplanet/ias6/ias/docs/admin/adplugin.html, --To Reconfigure an iPlanet Web Server
How to view/modify connection between web server and application server..?What version you want to install.
Refer this link or to download this PDF/HTML files.
http://docs.iplanet.com/docs/manuals/ias/60/install/install.htm#998205 -
Oracle on windows cluster, with failsafe installed. Can it be switched live
Hi all
We have a oracle database, 10.2.0.4, installed on a 2 node Windows cluster (2003 R2 64 bit). Only one node is the active node. On top of this Failsafe is installed.
Oracle is used for SAP.
Normally when I need to switch the Oracle database from node1 to node2 I follow this procedure:
1 bring down SAP
2 set the database offline
3 switch the Oracle database using failsafe
4 set the database online
5 start sap
Being a hospital we just want to have SAP up all the time, this procedure only takes 20 min but I wondered if the switch could be done live
So just go into the failsafe manager and switch, (won't do it in prime time of course)
Can this live switch result in a corrupt database?
Thanks for replyingHi,
to do it really life you need another technology than a "failover cluster". You can use RAC for this.
A failover cluster itself needs to be sure that the stack is down, before bringing it up on the other side. If not this can leed to corruptions... (though Oracle will try to prevent them in most cases)...
Regards
Sebastian -
Web Dispatcher 7.2 startup error
Hi,
I've just installed Web Dispatcher 7.2 on a Windows 2003 server to play around with but I'm getting an error
"The system cannot execute the specified program" whenever I try to run sapwebdisp.
I'm guessing that there is a missing Visual C++ runtime or something similar missing but I have 2005 SP1, 2008SP1 and 2010 installed. When I ran the prerequisite checker it came back that everything was okay.
Anyone have any idea what I'm missing?
Thanks,
PeterNever mind. I reinstalled the visual C++ 2005 SP1 runtime from the NTPatch folder and the program is running now.
-
URL for SOAP sender in case of web dispatcher
Hello,
I have a scenario SOAP-->XI -->RFC synchronous.
The soap request coming to XI is HTTPS without client authentication.
The URL is:
https://sapxiq:50101/XISOAPAdapter/MessageServlet?channel=:Srv_Web:Srv_Web_Soap_Server&version=3.0&Sender.Service=Srv_Web&Interface=http%3A%2F%2Fabc.com%2Fxi%2FeBillViewer%5Eos_getDocumentRequest
We have installed web dispatcher for load balancing.
Do I need to change the URL to replace web dispatcher host and port?
What is the additional setting need to be done in the web dispatcher profile?
Do I need to add icm/server_port_1 = PROT=ROUTER,PORT=443 in profile?
Thanks in advance,
Beena.Hi Beena
Just refer SAP note 538405
http://help.sap.com/saphelp_47x200/helpdata/en/42/5cfd3b0e59774ee10000000a114084/frameset.htm
http://mysapinkpot.blogspot.com/2007/11/sap-web-dispatcher.html
Re: Web Dispatcher
I hope this solved your query.
Regards
Abhishek -
Web Dispatcher Installation Problem
Hello gurus,
I am installing Web Dispatcher on HPUX 11.23 ia64, but when I specify the location of Kernel disk, SAPInst keeps reporting "you entered: /sapcd/..., find the label SAP:AKK:700:DVD_KERNEL:SAP Kernel 700:D51032890, but need the label SAP:AKK:700:KERNEL::HPUX_IA64;
I have downloaded the newest Unicode Kernel disk from SAP Service MarketPlace web site, what is the problem? how to solve it?
Thanks a lot.The DVDs which you have used for installation of EP7 , use same DVDs to install the sap web dispatcher , i think this will help u
Regards
sunny -
Web Dispatcher medium / large configuration
When we install web dispatcher, we are given an option for creating configuration for system of size medium / large...
There is a system installed as medium and I am looking it to adjust for large number of users..
Any help on what parameters will I have to change ?
icm/max_conn =
icm/max_sockets =
icm/req_queue_len =
icm/min_threads =
icm/max_threads =
mpi/total_size_MB =
mpi/max_pipes =
Apart from these, is the any other setting (not only parameter) that should be changed.. memory related etc ?Hi Jay,
Parameter Settings Dependent on System Size
Depending on which system size you have chosen (s, m or l), different parameter values are written to the profile file. The table below contains these different values.
Parameters Small (s) medium large
icm/max_conn 100 500 16384
icm/max_sockets 1024 1024 16384
icm/req_queue_len 300 500 6000
icm/min_threads 5 10 100
icm/max_threads 15 50 250
mpi/total_size_MB 100 500 2000
Please change the above setting in parameter value
If u want more information please find below link
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/48/877df50e3f2722e10000000a42189d/content.htm
Regards,
K.Ramamoorthy -
I have to install Web Dispatcher.please refer any document or links that would guide me through the complete installation procedure.
Thanks in advance
Regards,
PiyushHey
i have started web dispatcher but i am getting 2 errors frequently
those are listed in trace file as ..
[Thr 1412] Tue Oct 18 11:22:19 2005
[Thr 1412] *** ERROR => htmlEncode: called with empty string [icpif.cpp 802]
[Thr 4036] Tue Oct 18 11:22:49 2005
[Thr 4036] *** ERROR => IcrIHandleHTTPClientRequest() failed -1 [icrxx.c 1738]
Please give me info regarding this
Thanking you in advance.
Regards
piyush -
Hello, dear experts!
We try to set up a new web dispatcher for SAP WAS cluster (6.40 PatchLevel 87289.311) which is all done accoding to the help info.
However we can't use it as everytime I hit the Web Disp URL I am getting this error:
500 Dispatching Error
Dispatching Error
Error: -26
Version: 6040
Component: HTTP_ROUTE
Date/Time: Fri Oct 28 12:46:55 2005
Module: http_route.c
Line: 2351
Server: nrxqa8__00
Detail: no valid destination server available for '!ALL' rc=13
© 2001-2003, SAP AG
The web dispatcher profile we created is :
1. Profile generated by sapwebdisp bootstrap
SAPSYSTEMNAME = QA8
1. unique instance number
SAPSYSTEM = 03
1. Accesssability of Message Servers
rdisp/mshost = nrxqa8.NRXTOR.WORLD
ms/http_port = 3602
1. SAP Web Dispatcher Parameter
wdisp/auto_refresh = 120
wdisp/max_servers = 100
1. SAP Web Dispatcher Ports
icm/server_port_0 = PROT=HTTP,PORT=55555
1. SAP Web Dispatcher Web Administration
icm/HTTP/admin_0 = PREFIX=/sap/wdisp/admin,DOCROOT=./admin
1. Description of the Resource
icm/min_threads = 20
icm/max_threads = 40
icm/max_conn = 500
1. Communication Buffer
mpi/total_size_MB = 100
mpi/buffer_size = 65536
I really appreciate if you could help us with it... Any suggestions are welcome!
Thanks a lot!Hello Yuri,
have you setup the web dispatcher profile with the command:
sapwebdisp -bootstrap
? It would have tested the connection to the message server. I think the message server port is wrong. If your instance numer is 02 then the default HTTP message server port is 8102 and not 3602. 3602 is the port of the SAP own protocol.
Regards
Gregor
Maybe you are looking for
-
One library with multiple devices with different accounts?
Here is the setup: *(1) Windows XP PC with iTunes and (1) Library *(1) iPhone and (1) iPad with iTunes Account A *(1) iPad with iTunes Account B *(1) iTouch with iTunes Account C Is it possible to have one iTunes Library where we can all have our mus
-
Forms 10g, OAS and Web Services.... help!
Hello, We're in the middle of a project that was originally supposed to be a (simple :D) upgrade of an existing Forms 6i application to a Forms 10g application. During the course of the project we have encountered various problems with the older form
-
How do I get Maps application to work in NZ on my ...
hey I bought a nokia 5800 xpress music from singapore early this year and now im back in nz and I am having problems gettin the maps to work. I havent downloaded any maps software or anything and just not sure how to get it working? (yes i kno i kno,
-
Selection group in MRP run MD01
Dear all, While running MD01, It displays the selection group 1,2,3,4,5,6,7,8 What is this selection group, what is the meaning , Sometime these numbers are in red, what does it indicate Please guide me Subbu.
-
ITunes and iPod not syncing properly...please help
When i sync my 60GB video iPod with iTunes it starts to work, a few files or podcasts are copied then it seems to get "stuck" then an error message appears: attempting to copy to the disk "My Ipod" failed. The disk could not be read from or written t