Install Win 7 over Win 8.1

Hi! I've been trying to install Win 7 Ultimate in my G50-30 but I can't!! I get this blue screen that says The bios in this system is not fully ACPI compliant. I've already try this http://download.lenovo.com/consumer/hnt/lenovo_g40_30_g50_30_bsod_solution.pdf and this http://support.lenovo.com/en/documents/ht100535 and this https://forums.lenovo.com/t5/Lenovo-3000-and-Essential/Lenovo-G50-BIOS-in-this-system-is-not-fully-A... and got the same blue screen T_T
I got intel processor 2.16 GHz, RAM 4 GB and HDD 1 Tb.
Also, very important, I've been trying to install Win 7 from a bootable USB since the lap is not equiped with DVD lector unit.
Can anybody help me?

Installing Windows 7 will not void the warranty.
The license activation key for Windows 8.1 won't work for Windows 7. You will need a seperate license for that.
I advise you to install the 64-bit version of Windows 7. All required drivers for Windows 7 (64-bit) are available at the followin link. http://support.hp.com/us-en/product/HP-15-Notebook-PC-series/6545564/model/7241977/drivers
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

Similar Messages

I installed Win 7 over win8 and my pictures turned to xml files. My adobe premiere elements8 can't open them. What can I do???

I installed Win 7 over win8 and my pictures turned to xml files. My adobe premiere elements8 can't open them. What can I do???
morsa258

Hi Dorothea,
Please ensure that you are logged in to your system as administrator and anti-virus is disabled.
Once you click to download Acrobat trial version, 'Adobe Download Assistant' application will start downloading.
Then, run the application and then sign up with your Adobe ID credentials to download Acrobat pro XI from the available list of products.
Let me know if you still face the problem and share the screenshot of the message.
Hope to get your response.
Regards,
Anubha

Problem installing Win XP Pro SP2 on 2008 Mac Pro running 10.6.8

Okay, I have never setup or ran a bootcamp partition so I apologize in advance for my ignorance on the subject. I have been attempting to install win xp pro (SP2). I am using the Boot Camp Assistant v3.0.4. I have created a 32GB FAT32 partition and at the point I click Continue Installation (with the XP Pro disc in the drive) the computer reboots to supposedly install.
What happens instead is I get a revolving censorship/ban circle icon, folder with question mark and apple logo. It just continuously will flash between those 3 icons until I restart.
Here's what I've tried...
-removing all other drives. I'm attempting to install on the boot drive which is in bay 1.
-removed all external devices only things plugged in are my usb keyboard and DVI monitor
-deleting and recreating the partition
-I have the xp pro cd in the top drive and the snow leopard cd in the bottom drive (both internal cd/dvd drives)
Computer:
Model Name:          Mac Pro
Model Identifier:          MacPro2,1
Processor Name:          Quad-Core Intel Xeon
Processor Speed:          3 GHz
Number Of Processors:          2
Total Number Of Cores:          8
L2 Cache (per processor):          8 MB
Memory:          10 GB
Bus Speed:          1.33 GHz
Boot ROM Version:          MP21.007F.B06
SMC Version (system):          1.15f3
No matter what I try I am met with the same results. I have held down the option key and manually selected the windows xp cd. It seems to be booting but immediately turns off my DVI monitor which, well, makes it impossible for me to actually know what is happening. I do have a nvidia GeForce 8800 which only has two DVI ports off the back. I do have the adapter and an old VGA monitor I could pull out of the attic but would rather not unless that is my only option. Can someone in the community please point me in the right direction?
Many, many, many thanks!
Curtis
OKC, OK

Update: my problem was solved by getting my VGA monitor out of the attic. Once windows was done and I ran the setup.exe off the Snow Leopard CD, all of the drivers were updated to allow me to switch back over to my apple cinema display.
Also, I did need to hold down the option key to select the windows CD to install...and again to select the windows partition to boot but so far everything is going well with Bootcamp 3.0.4 and XP SP2...other than it is windows.
-Curtis

I have read various threads on installing Win XP on my iMac

Hi All
I have read various threads on installing Win XP on my iMac, i have tried on 2 seperate ocations to install win XP Pro on the partition created by bootcamp but in each instance the install failed. I get to the part of the installation where you select the partition to install win xp and when i select that partition i get partition not recognised please click enter to go back and choose a different partition.
To get the install to accept the partition i need to reformat it, and after doing this when the computer reboots it says please choose any key to boot from cd but in doing so the install starts all over again, or if i don't press a key and let the installation continue as i would on a normal pc the computer just freezes and the installation fails.
The couple of times i have tried this i have ended up reinstalling my mac os again, i don't want to go through all this again so if anyone can point me in the right direction it would be much appreciated.
Cheers
Dave

Mr.Lobotomy wrote:
Does your Win XP CD have Service Pack 2 on it? You cannot install the original Windows XP or Service Pack 1. You must install Service Pack 2 (or later). See http://docs.info.apple.com/article.html?artnum=306580
If this is your issue, search these forums (all dates) for "Slipstreaming" to learn how to convert your CD plus a blank CD into a Win XP SP2 disk.
I tried slipstreaming following the instructions I found on this forum, with no luck. It didn't recognize it as any kind of Windows install disk.

Cannot install Win 8 on a late 2013 iMac using bootcamp on 10.9

I'm trying to install Win 8 on a late 2013 iMac (purchased a couple of months ago)
I have a win 8 pro DVD, but obviously there is no DVD in this iMac. I usally use the DVD drive in my older 2009 iMac for any disk based installs but I can't appear to use it here.
I followed the instructions and downloaded a Win 8 Pro ISO from Microsoft to use with my authentication code, created a bootable USB using bootcamp, created the partition and rebooted. Once I'd entered the code I get to the install location but it says I cannot install on the partition created by bootcamp. Even if I format the partition it says I need a GPT drive but I have MBR, so won't let me install.
I tried several suggestions including creating aprtitions in various other programs and once I even got past that screen, but as soon as it tried to install I got another error saying the MBR was formatted incorrectly and it failed.
I had no issues installing Win 7 via bootcamp on the older iMac, but this one has me stumped. I used to think I knew a bit about computers, but I'm fairly new to Mac related issues as the older iMac has always just worked.
Any help would be greatly appreciated.

Hello,
I just installed Windows 8.1 on my Late 2013.
There are just a couple of things I had to do that deviated from the Boot Camp Installation Manual.
1. I downloaded my copy of Windows 8.1 as an ISO image AND as a bootable USB from the Microsoft site.
Not sure why I did that but it came in handy because Bootcamp was taking a very long time to copy the ISO onto the USB stick..
The ISO copying seemed to freeze up, but it's likely that it was just taking a long time, probably 20mins.
So, instead of waiting, I took the contents of the the USB startup stick and simply moved them over to the stick that Bootcamp had formatted for the ISO copy (I cancelled that copy function and deleted any files that had copied but didnt complete).
Once that was done, the machine rebooted from the USB stick and began the normal Windows setup process.
All went very smoothly except that my mouse was not working.
2. To get around the mouse issue, I simply plugged in a MS USB Mouse and it worked immediately.
The Bootcamp manual advised that the way around this was to 'click in upper right corner and search for Bootcamp'. Problem was, it was nowhere to be found.
So, using my MS mouse, I navigated to the 'DESKTOP' icon in Win 8.1 and found File Explorer, which showed my USB stick connected along with Bootcamp and the MS Support File (i.e. All the Apple Drivers).
I began manually clicking on all the driver files until realizing that there IS a Bootcamp executable which will automatically install the drivers for the Nvidia card, keyboard, camera, mouse, etc....
Once that was done, my installation was completed.
The entire process took about an hour, but now that I've done it, it really shouldnt take much more than 45 mins.
I have the late 2013 iMAC, with the GTX780M and 1TB Fusion Drive i5 Quad Core.
For those who are leery about doing this, please note that I'm a PC 'lifer' and this is my very first go-around with doing anything on an Apple product.
It all went much more smoothly than I could have imagined, but if you are not a PC person, you might be a little challenged finding the Bootcamp in File Explorer or doing anything in Win 8.1 to get over these minor hurdles.
Good luck!
I'm looking forward to getting STEAM up and running to see how this thing games!

Installing Win 7 via Bootcamp on 27' iMac 2010 gives BLACK screen, BLINKING cursor error (BSBCE)?

Hi All,
All coments appreciated regarding thiis issue.
I have a 2010 27' i7 2.93Ghz iMac with 8Gb ram, 2Tb Seagate, and 256 Samsung SSD.
I am running 10.6.8 with all updates on the 2Tb Seagate (has BC 3.04), and 10.7.1 on the Samsung (has BC 4.0).
I have tried over a dozen times to install Win 7 (both a 32 bit Professional edition and a 64 bit Ultimate edition) on BC partitions on both drives. These have been all on separate occasions of course.
All installs result in what appears to be a successful install, but when the machine reboots to launch Win 7 for the first time, I ALWAYS get a black screen with a blinking cursor error (BSBCE).
This is not the 2009 video card driver issue problem reported so widely and referred to in the Apple article TS3173. I had that model previously and the way around that was to connect a second monitor/LCD for the installation.
No this is a new and separate issue.
And I am no nubie. I have used IT for over 25 years and teach networking courses in the Win and Mac environments.
The problem appears to be in a corrupt boot loader install.
I have used both WIn 7 install disks to do a repair each time. The repair says it is successful but after rebooting all I get is the black screen and flashing cursor, with no keyboard response. I have used both Bluetooth keyboards and USB keyboards. Nothing seems to make a difference re getting WIn 7 to boot after the install on either drive.
I have also used the Bootrec commands in the command window. They all return a successful outcome but when rebooting I see the ever familar BSBCE.
Now,,,,,here is the real puzzle. I copied my previous Win 7 Ultimate install using Winclone before I sold my older 27' iMac.
If I restore that install to the 2010 iMac Win 7 boots fine!
So some error is happening on my current machine when the bootloader/bootmanager is being written to the BC partition.
The problem is there with the BC on both 10.6 and 10.7, and these are different versions of BC!
Now to further complicate the problem, I manage 12X 2011 21.5' iMacs in a lab at work. Win 7 Professional 32bit installed on these machines just as it should (same disks that produces the black screen flashing cursor).
I have read that some people thing it is a Boot Rom version issue, and there may be some substance to this as WIN 7 installs so easily on the 2011 iMacs in my lab.
I called Applecare about this and went through the procedures outlined above. The guy was very helpful and sympathetic but he had no answer to the problem. His suggestion was to pull the SSD out and do it again with only one drive. As the machine can ship from Apple with both of these drives I really do doubt that pulling the SSD would make a difference.
Mac OS 10.6 and 10.7 work fine, no problems on both drives, so I don't think it is a drive issue.
OK Mac gurus...over to you.

I have a bookmark for iMac w/ SSD and hard drive.
There is also the 'req'd reading' in http://www.apple.com/support/bootcamp
with one article on Black screen w/ iMac 2010.

Installing wine 0.9.54

Up to this point I've used pacman/yaourt for most of my apps, I've compiled a few but not many. What would be the best way to install Wine 0.9.54, since it's not in the pacman database yet? Is there an easier way than compiling?

andre.ramaciotti wrote:You'll have to erase the 'md5sums=' line also.
Here's the MD5 (I also verified the PGP sig).
8d9d5c8ed53f1f97cc997c2612bc3993 wine-0.9.54.tar.bz2
The build / upgrade went fine, but I thought they were going to completely get rid of the 'wineboot.exe' instances:
http://bbs.archlinux.org/viewtopic.php?id=42648
They didn't remove it, but it now takes up less RAM (~10 MB in 0.9.53 vs ~2.5 in 0.9.54).
Edit:
Just downgraded to 0.9.53. The 0.9.54 package I built causes odd application menu placement and also the screen doesn't redraw like it should.
For example, my Foobar2000 installation works great in 0.9.53, but if I click on a Foobar2000 menu using Wine 0.9.54, the menu now pops up well outside the bounds of the application. That has occurred in some other apps with previous Wine versions, but usually you can still get the menu to function. However, now its a bit tricky to get the mouse over to the menu and still be able to scroll through the menu items (without proper timing of the release of the mouse button, the menu stays visible but is non-functional).
The screen corruption occurs when a GUI is modified by the user (say, for example, when collapsing or expanding GUI elements). The only way to clear the mangled application display is to force a redraw such as occurs when minimizing and restoring the application.
I'll get back to playing with 0.9.54 eventually, but I don't have time now to mess around with the glitches.
Last edited by MrWeatherbee (2008-01-31 16:48:07)

Does anyone know about installing Win 8 Pro or Win 10 on a Z5771?

I have tried to put Win 8 Pro on my Z5771 after the failure of win 10. I had win 8 on it last year after installing a patch file from acer. The Win 8 version was not working well so I reverted to Win 7 Premium. But after attempting Win 10 and on the advice of an Acer technical support officer. I reset my acer to factory conditions, installed all the updates (3 years worth) and win 10 still aborted. Now I cant install win 8 either.

It's not entirely clear which operating system originally came pre-installed on your computer. After you post that information, you should get some better/detailed answers than mine. Because, I don't know if you've altered your BIOS settings and I don't know what product key is embedded in your BIOS, and I don't know what patch Acer provided for you and I don't know how computer savvy you are and I don't know if you have your files backed up and your recovery partition backed up. However, you will eventually need these links: http://windows.microsoft.com/en-us/windows-8/create-reset-refresh-media http://forum.crucial.com/t5/The-Cru/Reset-your-SSD-to-factory-settings-Windows-DiskPart/ba-p/162503 http://us.acer.com/ac/en/US/content/drivers Edit: There's two ways to use the windows 8.1 installation USB from link above. You can either install windows 8.1 pro or you can install windows 8.1 and allow windows update to update you to the pro version. Not sure which method will work for you. If one method doesn't work, you'll have to start over and create a new USB and try the other. Edit2: If you haven't already done so, you should also create recovery discs/USB/drives before you proceed with diskpart clean and/or any attempt at installation. http://community.acer.com/t5/Knowledge-Base/Windows-7-Recovery-options/ta-p/59667 http://community.acer.com/t5/Knowledge-Base/Windows-8-Recovery-options/ta-p/60811

[SOLVED] Installing WINE apps in a different location by default

Unless I'm misreading the wiki, it says:
To create a default prefix without running a Windows program or other GUI tool you can use:
$ env WINEPREFIX=~/.customprefix wineboot -u
I did that, then deleted my ~/.wine folder. Then I ran:
$ wine control
and it created ~/.wine all over again.
What I'm trying to do is to install WINE apps to a different location every time by default. I do not want to use ~/.wine at all.
Last edited by bpont (2013-11-25 01:35:27)

brebs wrote:
Your WINEPREFIX only takes effect for the first command.
Instead, use e.g.:
export WINEPREFIX=$HOME/.whatever
wineboot -u
wine control
That worked. I added it to my ~/.bashrc

Install win 8.1 error looking for disk

I have a new Mac Mini w/ Mavericks OS. I have been trying to install Win 8.1 for days. I had a keyboard on order, finally came today to allow me to Recover the Mac from a failed Win 8.1 install. I have read hundreds of conversations on this topic. And to air one question constantly asked, 'Why! Why is it that there are dozens of different ways people are having to use to install one program? Why?!?'
I am able to get to the page in Windows setup where I am to select the drive called BOOTCAMP.
I select the drive
I then FORMAT the drive
Then I am told that drive - or any installation for Windows drive - is NOT found or available.
I've gotten to this screen a dozen times now.
I have arrived there by two methods 1) following the 'book' on Win 8.1 installation via BOOTCAMP and 2) Once here I shut the machine down and reboot with CTRL-key at restart -> select the WINDOWS drive from those available -> then follow the Windows install panels. Which, every time leads me right back to this page.
A note about this page. Every online tutorial, including the one on the Windows site and here on Apple forums, shows a DIFFERENT layout of the page. The tutorials show a page with a link to click for Advanced settings. My window just shows those Advanced settings. I don't see how this makes the process work or not, but that's a peculiarity of my setup woes compared to the instructions that exist.
NOW .. HOW in the name of all that is sensible!! -- do I get from the page where I select the partition I need to install Win 8.1 on..?
Again ..PLEASE!!! DO NOT retroute me through all the old settings everyone has been hashing about since September 2013. I need to know What Works NOW - January 2014- to get Windows 8.1, installed and working on my Mac Mini running latest version of Mavericks.
Thank you ... I HOPE!

Windows 8.1 is not yet officially supported in Bootcamp. There is no way to know when it will be supported.
Having said that some systems will install it and it runs fine, though these systems appear to be few and far between.
The only advice I can give is to try some of the workarounds available on various sites or wait until it is supported by Bootcamp.

How to install win 8.1 pro x64 on MBA mid 2013 (core i7)

Please help me how to install win 8.1 pro x64 on MBA mid 2013 (core i7).
Thank you very much for your help.
Best regards.

Everything you need to help you is located here: http://www.apple.com/support/bootcamp/

Fresh install Win 8.1 Pro into Pavilion X2 (10", 32GB tablet)

Have a Pavilion X2 (32GB version) with Win 8.1 Bing.
Need to get into domain, therefore wanted to fresh install Win 8.1 Pro, at the same time remove the recovery partition for more space.
F10 to bios to set bootup to USB drive, pops in a Win 8.1 Pro x64 installation disc, but X2 refuses to boot to disc.
Is it the x64 version disc problem or have i missed some setting to make the X2 boot to disc properly??

HI @Nikola84 ,
Welcome to the HP Forums!
It is a terrific place to find answers.
For you to have the best experience in the HP forum I would like to direct your attention to the HP Forums Guide Learn How to Post and More
How Do I Find My Model Number or Product Number?
I understand that you are trying to install a clean version of Windows 8.1 ( 64 bit).
What edition of of Windows 8.1 (64 bit ) are you trying to install?
Please provide your exact model of Pavilion 10 x 2.
Regards
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

Error trying to install Win 8.1 x64 Enterprise

Brand new iMac 27", fully loaded, 1 TB SSD, 32 GB RAM, running Mavericks 10.9.3. Trying to install Win 8.1 x64 Enterprise (from MSDN).
Downloaded the ISO file and license and used Boot Camp to install the files and Apple Support files to a 16 GB USB 3.0 thumbdrive.
Used Boot Camp to repartition the 1 TB SSD to set a Windows partion of 256 GB, then the computer rebooted into Windows Setup.
Came to the drives listing, selected the BOOTCAMP parition (Drive 0, Partition 4, 239 GB) and formated it, then clicked on NEXT.
Thought for a while, then it came up with this error message: "We couldn't install Windows in the location you chose. Please check your media drive. Here's more info about what happened: 0x80300002"
Got some hits on Google about issues with VISTA, or with Intel processors, but, nothing specific.
Checked USB thumb drive with Norton, no issues, CHKDSK, no issues.
Have repeated the entire process twice, including restoring the patition and recreating it, and rebuilding the USB Thumbdrive.
Any ideas on what to do?
Thanks!

More sadness. I finally started getting the BSOD as soon as Windows booted, and, I could not restart or shutdown the computer...had to power off. That, after a few times, corrupted my BootCamp partition. I messed around with trying to fix, but, no joy.
Redid the partition, checked all drives for errors (fixed permissions on the Mac HD...LOT of errors), and created a new partition.
Used USB 2.0 (VERY SLOW) thumbdrive and had all external drives removed, and installed Win 8.1 Pro, not Enterprise this time.
Got it back up, patched it, configured it, put Norton 360 on it (have on all my computers and iOS devices) shut down, and hooked up the external drives. Booted up and...got the BSOD.
This time I had Windows Debugger loaded, and after the BSOD could reboot, go back intoWindows, and Debug.
Culprit seems to be Norton--in particular a Norton Storage driver. Will be contacting vendor to fix.
Here's dump:
Probably caused by : SYMDS64.SYS ( SYMDS64+71be6 )
Microsoft (R) Windows Debugger Version 6.3.9600.17029 AMD64
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [C:\Dump\MEMORY.DMP]
Kernel Bitmap Dump File: Only kernel address space is available
************* Symbol Path validation summary **************
Response                         Time (ms)     Location
Deferred                                       SRV*C:\Symbols*http://msdl.microsoft.com/download/symbols
Symbol search path is: SRV*C:\Symbols*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 8 Kernel Version 9600 MP (8 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 9600.17085.amd64fre.winblue_gdr.140330-1035
Machine Name:
Kernel base = 0xfffff802`0f87e000 PsLoadedModuleList = 0xfffff802`0fb482d0
Debug session time: Tue Jun 17 00:48:52.131 2014 (UTC - 6:00)
System Uptime: 0 days 0:03:09.864
Loading Kernel Symbols
Loading User Symbols
Loading unloaded module list
*                        Bugcheck Analysis                                    *
Use !analyze -v to get detailed debugging information.
BugCheck 139, {3, ffffd0002852d3e0, ffffd0002852d338, 0}
*** ERROR: Module load completed but symbols could not be loaded for SYMDS64.SYS
*** ERROR: Module load completed but symbols could not be loaded for SYMEFA64.SYS
Probably caused by : SYMDS64.SYS ( SYMDS64+71be6 )
Followup: MachineOwner
6: kd> !analyze -v
*                        Bugcheck Analysis                                    *
KERNEL_SECURITY_CHECK_FAILURE (139)
A kernel component has corrupted a critical data structure. The corruption
could potentially allow a malicious user to gain control of this machine.
Arguments:
Arg1: 0000000000000003, A LIST_ENTRY has been corrupted (i.e. double remove).
Arg2: ffffd0002852d3e0, Address of the trap frame for the exception that caused the bugcheck
Arg3: ffffd0002852d338, Address of the exception record for the exception that caused the bugcheck
Arg4: 0000000000000000, Reserved
Debugging Details:
TRAP_FRAME: ffffd0002852d3e0 -- (.trap 0xffffd0002852d3e0)
NOTE: The trap frame does not contain all registers.
Some register values may be zeroed or incorrect.
rax=ffffe00059c129f0 rbx=0000000000000000 rcx=0000000000000003
rdx=ffffe0005718d2a0 rsi=0000000000000000 rdi=0000000000000000
rip=fffff8020f9e8cdb rsp=ffffd0002852d570 rbp=0000000000000000
r8=0000000000005aa0 r9=00000000000007ff r10=ffffd00066cc8000
r11=ffffe00059963040 r12=0000000000000000 r13=0000000000000000
r14=0000000000000000 r15=0000000000000000
iopl=0         nv up ei pl nz na pe cy
nt! ?? ::FNODOBFM::`string'+0x682b:
fffff802`0f9e8cdb cd29            int     29h
Resetting default scope
EXCEPTION_RECORD: ffffd0002852d338 -- (.exr 0xffffd0002852d338)
ExceptionAddress: fffff8020f9e8cdb (nt! ?? ::FNODOBFM::`string'+0x000000000000682b)
   ExceptionCode: c0000409 (Security check failure or stack buffer overrun)
ExceptionFlags: 00000001
NumberParameters: 1
   Parameter[0]: 0000000000000003
DEFAULT_BUCKET_ID: LIST_ENTRY_CORRUPT
BUGCHECK_STR: 0x139
PROCESS_NAME: System
CURRENT_IRQL: 2
ERROR_CODE: (NTSTATUS) 0xc0000409 - The system detected an overrun of a stack-based buffer in this application. This overrun could potentially allow a malicious user to gain control of this application.
EXCEPTION_CODE: (NTSTATUS) 0xc0000409 - The system detected an overrun of a stack-based buffer in this application. This overrun could potentially allow a malicious user to gain control of this application.
EXCEPTION_PARAMETER1: 0000000000000003
ANALYSIS_VERSION: 6.3.9600.17029 (debuggers(dbg).140219-1702) amd64fre
LAST_CONTROL_TRANSFER: from fffff8020f9ddae9 to fffff8020f9d1fa0
STACK_TEXT:
ffffd000`2852d0b8 fffff802`0f9ddae9 : 00000000`00000139 00000000`00000003 ffffd000`2852d3e0 ffffd000`2852d338 : nt!KeBugCheckEx
ffffd000`2852d0c0 fffff802`0f9dde10 : ffffe000`59c8cc40 00000000`00000000 ffffe000`54b71040 fffff800`1d6d40b6 : nt!KiBugCheckDispatch+0x69
ffffd000`2852d200 fffff802`0f9dd034 : 00000000`00000000 00000000`00000000 ffff6d2d`50094127 fffff802`0f81458f : nt!KiFastFailDispatch+0xd0
ffffd000`2852d3e0 fffff802`0f9e8cdb : ffffc000`061df4e0 ffffc000`061df4e0 ffffc000`061dfbf8 00000000`00000000 : nt!KiRaiseSecurityCheckFailure+0xf4
ffffd000`2852d570 fffff800`1d7a0be6 : ffffe000`59e10120 fffff800`1d794388 ffffe000`54dfe9c8 fffff800`1d735f7c : nt! ?? ::FNODOBFM::`string'+0x682b
ffffd000`2852d5a0 fffff800`1d7a54e2 : ffffc000`061df4e0 ffffc000`061dfbf8 ffffc000`061df550 fffff800`1d7367ea : SYMDS64+0x71be6
ffffd000`2852d5d0 fffff800`1d737f20 : ffffc000`061df378 ffffc000`061dfbf8 00000000`00000000 ffffc000`05a9bf18 : SYMDS64+0x764e2
ffffd000`2852d620 fffff800`1d73e171 : ffffc000`051e6a88 ffffc000`05a9bf18 ffffc000`05a9bf18 ffffe000`5988cb00 : SYMDS64+0x8f20
ffffd000`2852d650 fffff800`1d782027 : ffffc000`061ea018 00000000`00000000 ffffe000`58409008 fffff800`1d794388 : SYMDS64+0xf171
ffffd000`2852d680 fffff800`1d79af21 : ffffc000`061ea018 ffffd000`2852d8c9 ffffe000`58409008 00000000`10000004 : SYMDS64+0x53027
ffffd000`2852d6c0 fffff800`1d9a3bb3 : ffffe000`58409078 fffff800`1d98b3e8 ffffe000`58409008 ffffd000`2852d8c9 : SYMDS64+0x6bf21
ffffd000`2852d6f0 fffff800`1d9a91fa : ffffe000`5840a1a8 ffffe000`58409008 00000000`00000000 ffffe000`00000000 : SYMEFA64+0xe9bb3
ffffd000`2852d720 fffff800`1d9ae015 : 00000000`00000000 00000000`00000000 ffffd000`2852d8c9 ffffe000`58a10e60 : SYMEFA64+0xef1fa
ffffd000`2852d760 fffff800`1d9adf4c : 00000000`01820201 ffffe000`58a10e60 ffffe000`58a10e60 ffffe000`58a10be0 : SYMEFA64+0xf4015
ffffd000`2852d790 fffff800`1d9b294c : ffffe000`59e0a150 ffffe000`58a10e60 ffffe000`5988ca80 ffffe000`58a10e60 : SYMEFA64+0xf3f4c
ffffd000`2852d7c0 fffff800`1d9a2435 : ffffd000`2852d8a0 ffffe000`599a4010 ffffd000`00000000 ffffe000`59e0a010 : SYMEFA64+0xf894c
ffffd000`2852d7f0 fffff800`1d6d528a : 00000000`00000000 ffffe000`59e0a070 ffffe000`5604e300 ffffe000`58a10e60 : SYMEFA64+0xe8435
ffffd000`2852d820 fffff800`1d71bf76 : ffffd000`2852d960 00000000`00000000 ffffe000`5604f900 ffffe000`571dab10 : fltmgr!FltpPerformPreCallbacks+0x31a
ffffd000`2852d930 fffff800`1d6d413a : ffffe000`57170dd0 ffffe000`571dabd0 ffffe000`59cf18c0 fffff802`0fd411a7 : fltmgr!FltpProcessShutdownRequest+0x122
ffffd000`2852d9b0 fffff802`0fbf7518 : ffffe000`57170dd0 00000000`00000001 ffffe000`571dabd0 fffff802`0fb54a90 : fltmgr!FltpDispatch+0x13a
ffffd000`2852da10 fffff802`0fbf7273 : 00000000`00000001 00000000`00000000 00000000`00000001 00000000`00000000 : nt!IopShutdownBaseFileSystems+0xb8
ffffd000`2852da90 fffff802`0fbfb722 : fffff802`0fbfb4b0 00000000`00000000 ffffe000`59963040 ffffe000`59963040 : nt!IoShutdownSystem+0x127
ffffd000`2852db10 fffff802`0f8d1adb : fffff802`0fbfb4b0 ffffd000`2852dbd0 00000000`00000000 ffffe000`59963040 : nt!PopGracefulShutdown+0x272
ffffd000`2852db50 fffff802`0f94d794 : ffffe000`59965800 ffffe000`59963040 ffffe000`59963040 ffffe000`54b71040 : nt!ExpWorkerThread+0x293
ffffd000`2852dc00 fffff802`0f9d85c6 : ffffd000`66c40180 ffffe000`59963040 ffffe000`59965800 00000000`00000000 : nt!PspSystemThreadStartup+0x58
ffffd000`2852dc60 00000000`00000000 : ffffd000`2852e000 ffffd000`28528000 00000000`00000000 00000000`00000000 : nt!KiStartSystemThread+0x16
STACK_COMMAND: kb
FOLLOWUP_IP:
SYMDS64+71be6
fffff800`1d7a0be6 33d2            xor     edx,edx
SYMBOL_STACK_INDEX: 5
SYMBOL_NAME: SYMDS64+71be6
FOLLOWUP_NAME: MachineOwner
MODULE_NAME: SYMDS64
IMAGE_NAME: SYMDS64.SYS
DEBUG_FLR_IMAGE_TIMESTAMP: 51f84c44
FAILURE_BUCKET_ID: 0x139_3_SYMDS64+71be6
BUCKET_ID: 0x139_3_SYMDS64+71be6
ANALYSIS_SOURCE: KM
FAILURE_ID_HASH_STRING: km:0x139_3_symds64+71be6
FAILURE_ID_HASH: {bf9be68b-5f04-08d4-3152-3d420dc362f6}
Followup: MachineOwner

Friends, MacBook Pro 8,1 – Intel Core i5 – 2.23 GHz (early 2011) New MB Pro with OSX 10.6 – current on all updates. I successfully installed rEFit. I used Boot Camp to install Win 7. All was great. Then installed debian 6. Somehow after the debian i

MacBook Pro 8,1 – Intel Core i5 – 2.23 GHz (early 2011) New with OSX 10.6 – current on all updates.
I successfully installed rEFit. I used Boot Camp to install Win 7. All was great.
Then installed debian 6. Somehow after the debian install and restart (I know this sounds crazy) but I am now reduced to Win 7 only. rEFit is not present when rebooting nor is OSX or debian. Further, I am unable to force the install DVD to launch when rebooting, by holding C, D or F8. The Option key brings me to the grey screen with a padlock. I have attempted the root and local pw- no go. Restart holding D takes me to the windows boot manager. I have attempted several options within the Advanced Options; including – Repair Your computer, safe mode and “last known good config,” All of which did nothing.
I can see all my OSX files within win7. I tried to install the OSX within windows. Ya right, that did nothing..
I only desire to get back to OSX...
What are my options??

Yes, you royally hosed up your machine.
You should first try to get your files off, any way you can to a external drive.
Your going to need to hold c and boot from the disk that came with your computer and a couple of screens in under the menu is a option for Disk Utility.
Select your drive and Erase with Security Option Zero, format the drive HFS+ Journaled and when that's finished (about a hour or so) then quit and install OS X from the installer.
I hope this works, but I suspect it won't. Others have hosed their machines trying to use a Linux disk without proper partition formatting too.
Another option might be to use another Mac to c boot off the Snow Leopard disk and install OS X onto a external drive, take that to the problem Mac and try holding option and booting off of it to erase your internal drive.
You could replace the drive.
frederick s wrote:
The Option key brings me to the grey screen with a padlock.
Is this holding option while booting?
There was someone else around here who hosed their Mac with a Linux disk too. Try to find it.

How can I install Win XP on Satellite U300-150 PSU30e

How can i install win xp on U300-150 / Model : PSU30e
I try to boot from CD Win XP SP2 but cannot not detect any HDD.
How can i do it ?
There is no option on bios for SATA support or IDE
please help me

Hey buddy
You will not find any SATA or IDE settings in the BIOS. The problem is that you have not installed the SATA driver which is necessary to install the XP on this notebook.
The key is Intel Matrix Storage Manger!
The Storage Manager has to be included into the Windows XP OS during the setup procedure using the button F6.
At the other hand you could include the Storage Manger using the free application called nLite.
Search a little bit in this forum. There are enough threads and postings regarding this theme.
Ciao

Install Win 7 over Win 8.1

Similar Messages

Maybe you are looking for