Install Windows 7 now or wait for Snow Leopard (bootcamp 3?)

What should I do? I just received my RTM copy of Win7 and I'm debating whether or not I should wait for the Snow Leopard release to install it.
I wonder if it will be better supported with bootcamp 3. Any (quick) advice would be greatly appreciated. Thanks!

I definitely agree with Hatter, it was the easiest installation with Bootcamp I've experienced with a Windows OS and I'm currently running Leopard.

Similar Messages

  • After I installed 10.6.8, my HP Officejet lost the ability to print 2-sided.  I installed the latest HP drivers for Snow Leopard, but the 2-sided option is turned off and greyed out.

    After I installed 10.6.8, my HP Officejet 7310 lost the ability to print 2-sided.  I installed the latest HP drivers for Snow Leopard, the 2-sided option shows up in the print window but is turned off and greyed out.  Also the scan function won't let me scan at any density greater than 150 dpi.  I have talked to Applecare and to HP tech support and been told "too bad."  Any help would be appreciated.

    THANK YOU!  And who are you?  I spent a couple of hours on the phone with Applecare and with HP Tech Support and they couldn't fix what you did in a few words.  Many thanks!  John

  • Error installing Windows 7 on Macbook running snow leopard

    I've been trying to install Windows 7 on Macbook running snow leopard.  During the windows install, it goes through expanding the files and then fails with errors saying the installation files are corrupted.  I've gone back to boot camp assistant, and removed the partition, and then re-partitioned and still see the same issue. Has anyone seen this problem?

    Read the Boot Camp Instructions located here: http://www.apple.com/support/bootcamp/. You must use the same drive that contains OSX to install Windows using Boot Camp Assistant.
    The Boot Camp community is located here: https://discussions.apple.com/community/windows_software/boot_camp
    I've asked the moderators to move your post.

  • Want to buy a new Mini, but should I wait for Snow Leopard?

    I'm ready to buy a Mac Mini now. But with Snow Leopard just around the corner, I would hate to have to dish out another $129 for Snow Leopard when I could have just waited a few months for it to ship with the Mini.
    Is it worth it to wait, or should I just dive into a new Mini with just Leopard?
    Any thoughts on this will be greatly appreciated.

    Thanks for the great input everyone!
    Most of you say 'go for it now', and that's the way I'm leaning, but I'll drill down a little deeper with where I'm at on this.
    I've been wanting to get a Mini since they first came out, but more intently since last fall. I heard that they were due for a refresh, and rumors had been floating that there would be new models in Q1 of 2009. I had hoped to see them at Macworld, but we all know what a disappointment that was. So after much anticipation, they're finally here. All that to say, I have a very strong desire to order one right now.
    But then there is this question of Snow Leopard. My main reason (although there are many) for getting a Mini is to record my broadcast TV shows in HD with eyeTV. I've been using my Dual 867Mhz Power Mac G4 (MDD) to record shows in analog mode with eyeTV, and it does it very successfully. But my G4 doesn't meet the requirements to record in HD (although I've tried it and it will record HD, but it's not always successful and it takes at least 12 to export it to iTunes). Also, broadcast TV is going to can analog on June 12. So I wont be able to record my shows after that unless I have the Mini.
    So, here is where I'm at with this dilemma:
    AndyO hit the head on the nail with this
    AndyO wrote:
    There is a good argument to say that if you have no immediate need for a new system, you should wait until Snow leopard is announced, but not yet pre-installed on systems in the supply chain and buy a system then. That would give you an installed copy of Leopard and either a Snow Leopard upgrade disk in the box, or an 'up-to-date' program option to buy a Snow Leopard copy for a small fee. That would give you the best of both worlds.
    This is exactly what I'd like - "the best of both worlds." Getting SL with the Mini but not having it pre-installed would be ideal.
    But will the announcement come at the WWDC?
    Will the WWDC be held at the speculated date of June 6-12 (which is right before the DTV switch btw)? And even if I wait for the announcement, this is not the guaranteed outcome (they could end up saying that all systems will be shipping with SL today).
    Ugh! I'm so torn.
    Does anyone know how far ahead they announce the date of the WWDC?

  • Can I  install Windows 7 without upgrading to Snow Leopard?

    I have Windows 7 and I just bought the Snow Leopard upgrade disk. I want to install Windows 7 on its own hardrive (no partition) but without having to upgrade to Snow Leopard first. I am happy with Leopard and feel if it ain't broke, don't fix it.
    I am wondering if I can just use Leopard to install Windows 7 onto the new drive, then boot into Windows 7 and use the Snow Leopard disk to install Bootcamp 3.0 and all the other drivers.
    Does Snow Leopard have to be on the Mac in order to get the right EFI/Bios to run Windows 7 in XP mode, or does Boot Camp take care of that?
    Thanks

    AppleHFS is 'buggy' and HFS filenames can cause Explorer to hang (green bar) if it runs across any special character is doesn't like.
    And yes, there is no requirement to be running SL. BC 3.0 also came out before Windows 7 (trying to jump the gun? pre-mature? wanted to get SL out the door before Windows). Newer SL DVDs usually also have later version of "3.0" Shame that 3.0 has to be installed and then updated instead of just a logical download/install of 3.2 (maybe put in any OS X DVD to verify you have it?).
    Apple won't, they want sales of SL and pre-install. Any other source, and people have hosted it, not worth the risk, and violates terms of use posting it online.
    Instead of using AppleHFS, which you rename to disable, there is HFS driver from Paragon as well as MacDrive8 (which has its own issue with 7). AppleHFS interferes and prevents using Windows Backup is also a concern.
    I'm not sure I totally trust NTFS-3G to write to Windows 7, or allow cross platform read/write.
    More and more, the tech specs and hardware or software requirements (requires 10.6 DVD is only for BC drivers), or ATI 5770 'only' works with 2009/2010, but doesn't and didn't say 10.6.5 or later), otherwise works with any Mac Pro (would be hard to prevent).

  • Ask for disks replacement or wait for Snow Leopard?

    I think I've lost the OSX Leopard disks (both of them) that came with my MacBook unibody.
    In a recent post I've read that it's possible to ask Apple for a replacement. But considering that I'm going to upgrade to Snow Leopard, are the original ones still necesary?
    Does the SL distro (the upgrade, I mean) contain, for instance, XCode or the Windows drivers for bootcamp?
    I also bought the iLife'09 upgrade .... [click in my mind and some minutes later] .... Ugh. Things are getting worse, I can't find that disk either. Ok, let's forget iLife for the moment.
    I'm using a TimeCapsule to backing up my Mac. AFAIU, if something goes wrong with my HD I can restore from the backup but I still do need the OS disks. Is that correct?
    Once I've installed SL, could the restore be done from within the SL disk making Leopard disk "obsolete"?
    Regards

    none of your SL questions can be answered here until snow leopard is officially released. that would be against forum rules and people who do have snow leopard already are still under NDA. but regardless of the answers I would certainly suggest you get the replacement disks. those install disks contain ilife that came with your computer and apple hardware tests which will be absent on a retail leopard or snow leopard disk. also, to restore your entire leopard system from a TM backup you will need a leopard install disk.

  • Wait for Snow Leopard??

    Hi, I currently have Snow Leopard can I wait for Mountain Lion or do I have Install the Lion upgrade first??

    Mountain Lion is not yet available as a product, only under non-disclosure agreement to testers.
    So no one can be sure of what the actual upgrade process will require.
    One thing that does seem clear is that some pre-2008 Macs will be left behind, so if your Mac is pre-2008, you may be waiting for nothing.

  • Installing Windows 7 on Mac OSX Snow Leopard 10.6.4

    Before i install Windows 7 on my mac, i read a lot of posts involving driver problems with the keyboard and windows not working on the windows partition. So i was wondering what should i do to avoid this problem

    applefanboy1996 wrote:
    Before i install Windows 7 on my mac, i read a lot of posts involving driver problems with the keyboard and windows not working on the windows partition. So i was wondering what should i do to avoid this problem
    You should head over to the Boot Camp forum, http://discussions.apple.com/category.jspa?categoryID=237 if you are going to install Windows using Boot Camp Assistant. The way to avoid problems is to read the Boot Camp installation guide and follow the instructions. I think most of the problems are due to not following instructions.
    If your plan is to install Windows using Parallels, Fusion, or Virtual Box, then head over to their respective forums and once again read the instructions.
    Windows installs fine on a Mac and most people do not experience problems.
    Message was edited by: BobTheFisherman

  • Cannot install XCode for Snow Leopard from the Appstore.

    So... I reinstalled OSX, mainly for the fact I wanted to... but now I'm trying to reinstall my Apps from the App Store, specificly XCode4, which is now titled "XCode for Snow Leopard" in my purchased apps... But I cannot download/install it. I get an "This is not available error" followed by a Error 100...
    Apple tech support is being utterly useless for this. Any ideas?

    Xcode ( 4.1.1) on the AppStore is now only for Lion.
    On the Developer Portal you can still access the freely available 3.2.6 package even without being a paying Apple Developer ( need only a Apple-ID to connect to the Mac Developer Portal for normal Users ) . 4.x was a paid app, so it is not accesible for average users from there nor from AppStore.

  • Latest Security Update for Snow Leopard

    After installing the latest Security Update for Snow Leopard, my MacPro is having sleep issues, it will not wake up, the drive seems to be spinning w/o awakening.. I have to manually shut down and reboot. Then all is fine.
    How do I fix this????
    MacPro 10/6/8
    2 x 3 GHz Quad-Core Intel Zeon
    12 GB RAM

    Don, I did check with the update and I must have installed it because there is nothing available. This problem started yesterday, 2/11/12 and is continuing today.
    I am checking to see if the update is the issue, or if my computer has a different issue. The only problem seems to be the disk spinning at wake up from sleep. I can shut down and reboot. Thankfully.

  • I've paid $ 3,99 for Xcode for Snow Leopard. Now there is a new Xcode for Lion, so I downloaded the new one but the installed continued to be the old one. Now App Store says "Installed" and don't allow me to re-download Xcode. How can I proceed?

    I've paid $ 3,99 for Xcode for Snow Leopard 12 days ago. After installing Lion I saw there is a new FREE Xcode for it, so I downloaded the new one but after installing automatically Xcode for Lion the Developer folder contained the old one. I deleted the old Xcode but the App Store says "Installed" and don't allow me re-download Xcode.
    How can I proceed? I'm guessing whether this problem will occur each time I buy an application from App Store.

    Yes, that's righ, Xcode installer was in the Apps folder. I assumed it had been automatically installed and the installer deleted after installation (the same way as Lion is installed).
    I tried also the procedure for redownloding applications, and MAS showed both Xcodes (Lion and Snow Leopard) and OS X Lion. We see that buttons for Lion and Xcode for Snow Leopard say 'Install' but Xcode for Lion says 'installed' because there is an Install Scode in the Apps folder.
    Thank you.

  • I downloaded latest software on iphone 4 and installed new software on my imac (snow leopard 8.6 and now phone not synching with new itunes. Itunes does recognize the phone but the itunes is totally different now. It doesn't look anything like the previou

    I downloaded latest software on iphone 4 and installed new software on my imac (snow leopard 8.6)and now phone not synching with new itunes. Itunes does recognize the phone but the itunes is totally different now. It doesn't look anything like the previous vesions. I can't even find a tab for synching. very strange. any help is appriciated.

    iTunes 10.7 is compatible with Snow Leopard.
    You can download it here: http://www.apple.com/itunes/

  • Install Disk for Snow Leopard will not boot on an iMac 27in

    My Install Disk for Snow Leopard will not boot on my iMac 27in. The Apple Logo is the only thing the user will see. The current OS on the system is 10.6.6. Upon placing the Snow Leopard DVD in the system, the DVD players spins for a few seconds and displays the Apple Logo. Nothing happens after 20 minutes.

    Yes, it is ridiculous how it is impossible to install Snow Leopard. I have two Snow Leopard DVDs: one that I purchased for a Macbook soon after it's release (10.6.0), and one that came with my iMac (10.6.4). Both of these boot up my Macbook (running 10.6.7) just fine. My SL 10.6.0 DVD mounts onto my iMac (Lion 10.7.0), but you cannot run the install. I attempted to boot from this DVD and got the infinite white screen and Apple logo, as some have reported above. The other SL 10.6.4 DVD will not even mount in Lion, and will not even show up as a bootable drive when I attempt to select it after holding alt/option on reboot.
    I created a bootable external drive from SL 10.6.0, attempted boot, same infinite white screen/apple logo.
    I created a bootable external drive from SL 10.6.4 on my macbook. I attempted to boot from this drive, and got the white screen of death, except that this time I actually got the loading symbol underneath the Apple logo. After about a minute of attempting to boot, the Apple logo changed to a circle with a diagonal line through it (the "NO!" sign).
    I took my iMac to the genius bar. They inserted SL 10.6.0, which would not boot. Then they determined that my computer had to run 10.6.4 and later. So, they restored an image of SL 10.6.4 onto my partition (not an install from an image, but an image of SL already installed). Hurray! Snow Leopard was successfully shoved onto my iMac!
    I then deleted a third partition on my hard drive I did not need anymore, which somehow screwed up my SL partition (even though it said "Will not erase partition SL or Macintosh HD). Now I am back at square one, and I guess I need to take my flippin iMac back to Apple for them to do what I should be able to do.
    I like Apple, but sheesh do I hate Lion right now.

  • Lion and snow leopard bootcamp, after installing lion snow leopard bootcamp with windows 7 does not boot

    Just installed Lion OS  on my 2nd mac (on the 1st without an issue) but as I had a partition with windows 7 (installed with Snow Leopard bootcamp).
    It seems that Lion OS renamed the Bootcamp partition but I am not able to rename it through OS.
    Is there a solution for this or do I need to re-install?
    Many thanks for your help
    Rui

    Hi Jack.........ok ive managed to create a link to that video on how to install bootcamp.....this is the tutorial i used and i managed to gain 100% completion on bootcamp 1st time no messing......like i said in my previous reply did you save the windows support files from apple....(Critical).....ok no point in messing about i suggest you start again from scratch........these are the things i used and YOU will need to complete bootcamp
    mem stick or cd-r / dvd-r......original copy disc of win 7 ...i never used an iso i used original disc....allow a minimum of 30gb of space for your win 7 partition.....if you want bootcamp so you can use big programs like windows based games i.e.....Crysis/Call of duty etc etc ..then you will need to consider that  you will need to allow a bigger partition to allow your HD to store the files.....this is the reason i installed bootcamp and so i made my partition    i have a 750GB HD so i made a partition of 300gb for windows 7 and left the other 450gb for Mac....so you need to partition enough for what you want bootcamp for remember once you get bootcamp working you will need to install ALL Important Windows updates Including Win 7 SP1......once everything is installed you will have bootcamp up and running lovely.....u can then boot up with either win7 or mac......click this link and watch carefully and do exactly as shown ok and you should be fine...if you have any probs contact me again ok.....let me know how you get on ok..:)...http://www.youtube.com/watch?feature=fvwp&v=QFIWtXTl4d0&NR=1

  • Ran Onyx for Snow Leopard (cleanup) and now my Safari is GONE. HELP!

    Running the latest OS. I ran ONYX for Snow Leopard, the cleanup section I think, and now Safari is GONE. Help! I downloaded it again from Apple's site and installed but it will now show. Help! I ran a repair disk, repair disk permissions and all finished OK. Help please!!!!
    I could restore it with Time Machine but is that the best thing to do?
    Message was edited by: mrpeepers

    I concur w/Allan. Don't use those apps. They're not needed and can muck things up. For maintaining a Mac, see:
    Mac Maintenance Quick Assist,
    Mac OS X speed FAQ,
    Speeding up Macs,
    Macintosh OS X Routine Maintenance
    Essential Mac Maintenance: Get set up,
    Essential Mac Maintenance: Rev up your routines,
    Maintaining OS X, and
    Myths of required versus not required maintenance for Mac OS X

Maybe you are looking for