Install Windows 7 on Lenovo t60

I have a lenovo t60 core2duo 1.83ghz 2gb ram and i have Windows vista it possible to put Windows 7?
Moderator Note: moved to correct board and edited subject to reflect topic.

Yes it will run W7 just fine. Stay with a 32-bit version, though, especially if you don't want to upgrade the RAM.
It takes about 10 minutes to remove the keyboard/palmrest and swap the DIMMs, even if you've never done it before, though...
Good luck.
Cheers,
George
In daily use: R60F, R500F, T61, T410
Collecting dust: T60
Enjoying retirement: A31p, T42p,
Non-ThinkPads: Panasonic CF-31 & CF-52, HP 8760W
Starting Thursday, 08/14/2014 I'll be away from the forums until further notice. Please do NOT send private messages since I won't be able to read them. Thank you.

Similar Messages

  • How to install windows like Lenovo do (U300e)

    It seems to me that Lenovo have installed windows on the C drive of my Lenovo U300e but also on the 32 GB SSD. So it is a sort of cached installation or something.
    The laptop boots of the SSD, but it is too small to do a windows install on so some of the windows files must be on the normal hard drive.
    My laptop crashed and I am trying to reinstall windows. I have managed to install it fine to the 2.5" hard drive and run it off there, but this is not taking advantage of the SSD, and I would like to set it up so that it boots of there, like it did when new.
    Any advice greatly appreciated.
    Phil

    It seems to me that Lenovo have installed windows on the C drive of my Lenovo U300e but also on the 32 GB SSD. So it is a sort of cached installation or something.
    The laptop boots of the SSD, but it is too small to do a windows install on so some of the windows files must be on the normal hard drive.
    My laptop crashed and I am trying to reinstall windows. I have managed to install it fine to the 2.5" hard drive and run it off there, but this is not taking advantage of the SSD, and I would like to set it up so that it boots of there, like it did when new.
    Any advice greatly appreciated.
    Phil

  • Installing Windows Server 2012 on W510

    I realize this is not likely to be a common scenario, nor a supported one. I'm installing Windows Server 2012 (Evaluation edition) on a w510 to use as a learning lab. In case anyone else decides to head down this road I've documented what I've run into so far.
    System: Thinkpad W510 43192NU 
    Upgrades: 16GB RAM, Crucial M4 256GB SSD.
    The basic install happened quickly and easily, but as expected there are a couple of driver issues.
    Installed Windows Server 2012 Standard 180-day EVAL from DVD (ISO obtained from Technet 10/15/2012)
    Installed available Windows Updates (only 2 as of October 25, 2012)
    Installed Lenovo nVidia discrete video driver for W510 Windows 8 64bit
    (getting braver here)
    Installed Thinkvantage System Update 5.0 for Windows 8 64bit
    Ran System Update and it found 3 available items:
    Intel Management Engine Interface 6.2 and Serial Over LAN (SOL) driver downloaded and installed
    Audio Driver for Windows 8 32/864 <--SIC Downloaded and installed
    ThinkVantage Active Protection System (64bit) <-- did not download / unsuccessful
    At this point there are also 3 items still listed under "Other Items" in device manager:
    Looked up device IDs in Properties, ran through driveridentifier.com:
    Base System Device (I think its the Ricoh Mulit-Card Reader)
    Device Name:
    Base System Device
    Hardware ID
    PCI\VEN_1180&DEV_E230&SUBSYS_213417AA&REV_01
    PCI\VEN_1180&DEV_E230&SUBSYS_213417AA
    PCI\VEN_1180&DEV_E230&CC_088000
    PCI\VEN_1180&DEV_E230&CC_0880
    Compatible ID:
    PCI\VEN_1180&DEV_E230&REV_01
    PCI\VEN_1180&DEV_E230 <---- Device ID matches with our database
    PCI\VEN_1180&CC_088000
    PCI\VEN_1180&CC_0880
    PCI\VEN_1180
    PCI\CC_088000
    PCI\CC_0880
    Current Status: Detected and installed using the Windows 7 driver from Lenovo
    Broadcom Bluetooth Device
    Device Name:
    ThinkPad Bluetooth 2.1 with Enhanced Data Rate II
    Hardware ID
    USB\VID_0A5C&PID_217F&REV_0360
    USB\VID_0A5C&PID_217F <---- Device ID matches with our database
    Compatible ID:
    USB\MS_COMP_BLUTUTH&MS_SUBCOMP_1112EDR
    USB\MS_COMP_BLUTUTH
    USB\CLASS_E0&SUBCLASS_01&PROT_01
    USB\CLASS_E0&SUBCLASS_01
    USB\CLASS_E0
    Current Status: Unresolved. Windows 7 driver failed, OS complained about compatibility issues.
    Unknown Device <-- That is how its listed under device manager
    Device Name:
    ThinkPad PM Device
    Hardware ID
    ACPI\VEN_IBM&DEV_0068
    ACPI\IBM0068
    *IBM0068 <---- Device ID matches with our database
    Compatible ID:
    Version
    1.43.0.0,2007-05-31
    Current Status: Unresolved. Installed Windows 8 Lenovo Power Management driver without errors but did not fix. Item still listed under "Other device"
    At this point I have it where I need it to be. All I want to do is have a stable basic install so I can install Hyper-V and play around with a bunch of VMs. For that I don't really need Bluetooth or enhance power management.

    Camarones wrote:
    Have you found a solution to the driver issues I mentioned?
    I had no issue installing the Windows 7 x64 power management driver and Power Manager.  Just keep in mind it is only for control of the CPU clock speed and a few other settings.  With Hyper-V installed, you lose sleep/hibernate and resume.
    Bluetooth won't work
    I never had a use for multcard.
    With Windows Server 2012 be happy you have networking and a video driver which are the core things you need.  If you want a full on workstation, move to Windows 8 Pro and Hyper-V.

  • Error In Installing Windows XP in Lenovo G560

    Hi,
    I am using lenovo G560 with Windows 7. Now i don't want to use it any more. so i decide to install Windows XP like normally in Desktops as i had used desktops only.
    Boot from CD and windows Set started with loading files....in middle it stops by showing Blue Screen of Death I am not sure about it why is come.
    Please suggest how to install Windows XP to replace windows 7 in lenovo G560
    Solved!
    Go to Solution.

    Hello everyone!
    I am using Lenovo G460, i guess it is not that different from G560 for the purposes of this discussion.
    I had the same problem with a blue screen. I changed settings in BIOS from AHCI to Compatible and installed XP. After that I updated BIOS from within the XP, installed all the drivers, including the AHCI driver from Lenovo website.
    Then, I go back to BIOS and change settings from Compatible to AHCI, and I get the blue screen again.
    Ok, i don't know anything about NCQ and hot swapping, which I read about on wikipedia, and which i suppose are supported by AHCI, but my question is:
    Should i now always stay with my settings as Compatible in BIOS and, therefore, never be able to use such features as NCQ and hot swapping? I repeat, that I don't know anything about AHCI or Compatible mode, but I figure that AHCI is better.
    Please help me in finding the answer, whether to stay on Compatible and forget about AHCI, or may be there is some way to solve the problem for XP users with AHCI mode.
    Thank you very much.

  • How to install windows 8 on a Lenovo IdeaTab K3 Lynx

    Hello all,
    So the warranty on my 3 Lenovo IdeaTab K3 Lynx is expired and all restore partitions are corrupted, although the hardware is in good sound condition im left with paper weights. I have contacted Lenovo Support and spoken to about 12 people in a matter of 3 days. Lenovo options are: 1. purchase extended warranty for $400 (this according to the person i spoke with) 2. Send my Lenovo IdeaTab K3 Lynx to a repair center for an initial cost of about $100 plus whatever they find wrong with the tablet. I would much rather install Windows 8 and all the drivers for the Lenovo IdeaTab myself.  Lenovo Ideatab support unlike Toshiba support refuses to sell a recovery USB or ISO.
    I have tried to boot a windows 8 USB with EFI but no success. ALL Recovery partitions are corrupted, to there is no other way but to reinstall a copy of windows on to the Lenovo IdeaTab K3 Lynx. Ghosting the tablet also did not work.
    at this point i would be happy to install Linux as well.
    anyone have any ideas?
    Thank you,
    Fabian
    Information Technology Specialist

    hi Fabian,
    Welcome to the Forums.
    Can y0u check tjniko s post in this thread as he was able to successfully install Win8.1 on the device.
    Regards
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • Blue screen error while trying to install windows server 2003 in Lenovo G500s essentials Notebook

    Hi,
    I bought a new lenovo G500s essentials note book. It's a freedos system.  I am trying to install windows server 2003 in it. But I am getting blue screen error . error message like ths,
    Technical Information:
    STOP: 0*0000007B (0*FFFFFADF2CE323C0, 0*FFFFFFFFC0000034, 0*0000000000000000, 0*0000000000000000)
    Can someone please help.
    Regards,
    Priya.
    Solved!
    Go to Solution.

    I don't have a similar machine to look at so this is a bit of a guess:
    Per page 30 or your user's guide http://download.lenovo.com/consumer/mobiles_pub/lenovo_g400sg400stouchg500sg500stouchg405sg505s_ug_e...:
    How can I start the BIOS setup utility?
    To start the BIOS setup utility:
    1 Shut down the computer.
    2 Press the Novo button and then select BIOS Setup
    There should be a tab labelled something like "Configuration" and on that page something like "SATA controller mode".  Select "compatible" and save and exit.
    I'm not certain this will fix your problem, but it's worth a try.
    Z.
    The large print: please read the Community Participation Rules before posting. Include as much information as possible: model, machine type, operating system, and a descriptive subject line. Do not include personal information: serial number, telephone number, email address, etc.  The fine print: I do not work for, nor do I speak for Lenovo. Unsolicited private messages will be ignored. ... GeezBlog
    English Community   Deutsche Community   Comunidad en Español   Русскоязычное Сообщество

  • Lenovo G50-30 - "No Bootable Device" error message when trying to install windows 7 via DVD-ROM.

    Hi all, Recently purchased a Lenovo G50-30 as a birthday present. After recieving the laptop, I tried putting a fresh install of Windows 7 64 Bit onto it. After changing the BIOS settings to allow legacy booting from the DVD drive and changing OS Settings to Win 7, I noticed I was getting an error reading "No Bottable Device -- Insert boot disk and press any key". After googling for a few hours on how to fix this I am still stumped and nothing seems to work. Has anyone had a similar issue or would know how to fix this?

    Hi omegafeggy,
    Welcome to Lenovo Community Forums!
    Im kind of confused with the sequence.
    Have you installed Windows 7 first then change the BIOS or You changed the BIOS first then Load Windows 7.
    Thanks
    Solid Cruver

  • Error related to EFI system..unable to install windows 7 64-bit on lenovo g580..

    Hi,
    I have Lenovo g580 which had DOS preinstalled in it {i5, 500GB, 4GB} and initially I had installed Win 7 32-bit on it. At that time, it gave some problem while rebooting 1st time, but i ran repair windows option and everything ran smoothly.
    But the problem came when I tried to install windows 7 64-bit on the laptop using a DVD, no matter which drive I select, it does not allow me to go ahead. When I checked the details, I got the error message which is attached here.
    Link to image
    There is no disk controller option in BIOS, nor is there anything related tto UEFI systems.
    i did r&d on uefi systems, but i want to be sure of everything before i go ahead with anything.
     Any help would be appreciated.
    Moderator comment: Image(s) >50KB converted to link(s). Community Rules.
    Solved!
    Go to Solution.

    Thanks for no help guyz!
    but i found a way..so for anybody else out there..here is the solution..
    When installing at the partition screen hit Shift+F10.
    At the prompt type diskpart and press Enter.
    Type list disk (Not the number of the disk you want to use)
    Type select disk X where is X is the number of the disk you want to use.
    Type clean. This will erase all the data on your system.
    Type convert gpt
    Now reboot the system with the DVD/USB, and you will see only Unallocated Space. Use that to install the new windows.
    Be warned though, this will clear out the partition table on the drive; make sure you have a backup before attempting this if you have important data

  • What drivers do i need to install on my Lenovo Y530 after installing Windows 7???

    I just installed Windows 7 on my new Lenovo Y530 and want to know what drivers need to be installed. A few problems is the surround sound speakers, the laptop had amazing sound before i put 7 on it and now the speakers aren't working together.
    Also the Veriface login isnt working, does anyone know how to connect it properly??
    Also what other drivers need to be re-installed to bring it back to full functionality???
    thanks for all the help

    You're using the MS .NET Framework Provider for Oracle. You will need to install the Oracle client on each client machine using a Windows Form to access Oracle.
    You will also need to include the MS .NET Framework Provider for Oracle. I can't remember if MS includes it with .NET Framework or not, however.

  • Unable to install Windows 7 Ultimate 64 bit on Lenovo 3000 J115 7387-26U

    Hi Everyone,
    I am unable to install Windows 7 Ultimate 64 bit on my Lenovo desktop. Model : 3000 J115 7387-26U.
    When I try to boot my DVD, the systems makes a loud whirring noise.. as if trying to read from DVD, the screen goes blank couple of times and then Windows XP starts up (from my HDD).
    I have a Windows 7 32 bit DVD and it successfully started up and I could see the install screen (though I didn't install it. I want to install 64 bit version of the software).
    Anyone else seen this problem? Is there some workaround available?
    Thanks for your help.
    Swam

    Hi:
    The Intel link you posted doesn't work, so I don't know what you have tried.
    See if this works...
    Download the drivers from this link below (first file listed -- 64 bit).
    https://downloadcenter.intel.com/Detail_Desc.aspx?​agr=Y&ProdId=2101&DwnldID=23060&keyword=Intel+Rap...
    Extract (copy) the files onto a usb flash drive without any folders.
    With the flash drive and W7 installation media plugged into the machine, boot from the W7 installation media.
    After you select the install now option, select the Drive Options - Advanced menu, then select the Load Driver option.
    You should now see the storage driver files listed.
    If you check the box, it will only include the compatible driver.
    Follow the prompts and hopefully, W7 will install.

  • Is it possible to install Windows 98 on Lenovo R61? (Without Virtual PC)

    Hi all,
    Just wondering whether I can install Windows 98 on a standard stock R61 8918-5KM series?
    I had purchased this notebook quite some time ago, but would like to go back into just having Windows 98 installed natively seeing I have a large collection of software which are not suited to OS's after XP or even XP for that mater. The system originally had VISTA but I downgraded to XP Pro seeing nothing really worked. With XP Pro I'm still  having problems.
    I have Windows 98 original and Windows 2000 original with XP/VISTA being the rescue and recovery CD pack which was ordered from Lenovo. HOWEVER, when going through the drivers support area, I can't seem to find the relavent drivers necessary for all the installed devices for either 98/2000.
    Is it possible to obtain these from Lenovo or would I need to go to the respective companies to obtain these?

    Hi Titang4ppc,
    Welcome to Lenovo Community Forums!
    As per the query you are looking for Installation of Windows 98 OS on your ThinkPad R61.
    I am sorry to inform you that there are no drivers available for Windows 98 OS, you can install Windows XP and drivers are available for that.
    Hope this helps.
    Best regards,
    Hemanth Kumar
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • Installing windows 7 on Lenovo G500 without losing preinstalled windows 8

    I want to keep the preinstalled version of windows 8 and install windows 7 too but after a few hours of research the only sugestion in every method is choosing one of the versions. Is there any way I can keep both?

    Hi Touctzba,
    Welcome to Lenovo Community!
    I understand your concern, Lenovo does not recommend multi boot OS (Operating System) as the computer pre-installed applications are programmed to perform on single Windows platform to provide the best performance as per OEM (Original Equipment Manufacturer). I would suggest you to create a Recovery Drive for Windows 8 using the below link and then installing other OS.
    How to Create a USB Recovery Drive and Use it to Recover Windows 8/8.1?
    Do post us back for further queries.
    Best Regards
    Shiva Kumar
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • Cannot install windows 7 (downgrade from Windows 8.1 on Lenovo U330 Touch)

    Hello.
    I wanted to downgrade my new Lenovo U330 Touch from Windows 8.1 to Windows 7 (x64 Home Premium). I followed the instructions from this previous forum post...
    https://forums.lenovo.com/t5/IdeaPad-Y-U-V-Z-and-P-series/U330-Touch-Downgrading-to-Windows-7/m-p/15...
    I accidentally deleted the partition with Windows 8.1 on it by mistake. Good riddance to it.
    Now, when I try to install Windows 7 from the boot sequence, I get the message saying that "Windows cannot be installed to this disk. The selected disk is of the GPT partition style".
    How do I install Windows 7 please?
    Solved!
    Go to Solution.

    benpatient wrote:
    Hello.
    I wanted to downgrade my new Lenovo U330 Touch from Windows 8.1 to Windows 7 (x64 Home Premium). I followed the instructions from this previous forum post...
    https://forums.lenovo.com/t5/IdeaPad-Y-U-V-Z-and-P-series/U330-Touch-Downgrading-to-Windows-7/m-p/15...
    I accidentally deleted the partition with Windows 8.1 on it by mistake. Good riddance to it.
    Now, when I try to install Windows 7 from the boot sequence, I get the message saying that "Windows cannot be installed to this disk. The selected disk is of the GPT partition style".
    How do I install Windows 7 please?
    I have tried this a few months ago. You can study the steps and try it on your unit.

  • How to install Windows 7 on Lenovo S300

    Hi, I bought Lenovo s300, and it has come with Windows8. However I would like to install Windows 7.
    I make bootable on USB, but I cant manage to boot up from it. What I should select in BIOS.
    What is the best way to arrange partitions. I have SSD 24gb. Is it possible to install windows on SSD, and leave HDD as storage?

    Hi Branko,
    Ok First off
    Check your BIOS by tapping F2 on startup Make sure under Configuration Tab the SATA Controller is set for RAID
    Installation:
      Set your computer to Boot on your USB drive(Where your Windows 7 installer is and start the Set up as Normal)
    - You will reach a point where it will ask you where to install your windows 7
     If it shows none "Like no HDD or SSD Being Detected" Then Download and extract this to a separate USB Drive(using another computer).then plug it in to your S300. Then on the Windows 7 installation click Browse, go to that USB drive and to the folder where you placed that downloaded file, Windows will identify it, make sure it is clicked and click Next.  Then all of your drives and respective partitions will appear.
               - Delete Partitions On your SSD and HDD
               - Create your Partition on the HDD and Install Windows on your HDD then continue and complete as Normal Installation and Reboot.
    -You should have Windows 7 booting from your HDD from this point-
    Download and install Rapid Storage from the link I provided Above.
    Now Launch the Intel Rapid Storage Technology."  This can be found in your Start Menu under the Intel folder.  It should be automatically set up to accelerate your main drive.  You will also see it has identified your SSD as the proper size, 24GB (24GB).
    If not, it is relatively easy to set up.  Choose the drive you want to accelerate, and the SSD you want to use as cache. 
    then your done Caching the HDD to your SSD and make sure to install All driver from Support.lenovo.com.
    Rapid Start this is optional if you want to set that up Just follow this method again and continue starting from the Rapidstart part.
     Hope this helps,
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • Error 0x80300024 when trying to install Windows Ultimate 32 bit on a T60

    I have been trying to install Windows Ultimate 32 bit on a T60 with a 128GB Solid state hard drive and I keep getting the error "Windows cant install to the current location Error code 0x80300024" I have formatted the drive in another PC, created the bit locker partition, but still windows says it is "unallocated space" Can anyone help please
    Moderator note: OS corrected in subject line

    Says "A problem occurred while extracting the archive.  Please try downloading the Photoshop Lightroom 5.7.1 installer again".
    Thanks!

Maybe you are looking for