Install windows 7 on mac pro raid

I have just got a mac pro with raid (3 1tb drives), they are set to raid 0 and I am trying to install windows 7 64 bit, 32bit if I really have too but it will not find the drivers on the disk the mac made for the windows installation. Where do I find the drivers, and can I set up for raid 0 and have mac+windows installed?
Dave

Mac OS X software RAID is implemented in software that loads when the Mac OS X kernel is operational.
Mac OS X software RAID cannot be used for Windows. If you want your Windows Boot Volume on a RAID, put it on a separate drive (which is good advice in general) and use a Windows-only RAID solution.
Many users find that the OS (Mac or Windows) does not benefit much from RAID -- having multiple bootable backups is a better solution. For performance, having a separate Boot Volume reduces competition for the data Drives, and speeds up your computer considerably.

Similar Messages

Hi, I would like to know if is it possible to install windows on mac pro , because I need to have some application like SQL server and visual studio, and they could not be install on mac

hi, I would like to know if is it possible to install windows on macbook pro , because I need to have some application like SQL server and visual studio, and they could not be install on mac

Windows on a Mac

Install Windows on Mac Pro Retina without Boot Camp

Hi,
I have downloaded a Win 8 ISO, used Boot Camp to "burn" the ISO image to flash. Then I used Boot Camp and downloaded related drivers etc. to the flash. Then when I chosed to install Windows using Boot Camp, I received "Insert disk to be recognized" etc - meaning it does not see Win 8 that it just "burned" to the flash. Being a tech guy, I decided to go other way - found Disk Utility and shrinked the Mac partition freeing some space for Windows partition manually. Then I decided to actually install Windows - I restarted, hold Control and finally successfully got to the Win8 installation shell. So far it worked. But then I stopped - right before clicking Format on the new partition I created. I realized that when I did that before on PCs the new Windows updates the MBR that it becomes the only bootable OS. Naturally I don't want that, I want both OS X and Win 8. So I cancelled the install and here I am
So my question is - if I bypass Boot Camp and install Win8 manually to the partition I created via Disk Utility, would I still be able to dual boot?
Thanks in advance!

You should be able to hold down the option key on a restart and select what you want to boot from.
If you want to go the virtual route, you can have both running at the same time.
Parrallels
VirtualBox
VM Fusion

I Am Having Trouble Installing Windows On Mac Pro.... Please Help!

I have gotten as far as installing boot camp and then running windows CD when I start the computer, but all my progress is stopped when I come to a screen durring the setup of XP that says.....
" The following list shows the existing partitions and unpartitioned space on this computer.
Use the up and down arrow keys to select an iteam from the list.
. To set up windows xp on the selected iteam press enter
. To create a partition in the unpartitioned space press, C
. To delete the selected partition, press d
A BOX RIGHT BELOW THE THREE OPTIONS READS.
238473 MB Disk 0 at id 0 on bus 0 on atapi (MBR)
C: Partition(unknown) 238475MB (238475 free)
So when i choose to press "C" to create a partition the computer dose absolutly nothing.
I thought i might be able to press delete existing partition to get the setup to continue but I am affraid I will loose everything that is on my hardrive right now.
I am completely confused and this problem is keeping me from installing all of my windows applications I use for my recording studio.
If anyone can please help it would be very much appriciated.
Thank You,
Zach Moretz

The most thorough discussion of how to correct this is in the user tip: https://discussions.apple.com/docs/DOC-6562

How to install windows in mac pro 13

I need to use microsoft but l need windows to set more easy my docs, please could you help me to find solutions for delate lines and letters back as with windows
l found in mac is not easy to deal with its
thank you

You can use Boot Camp or you can use VMWare/Parallels. You'll have to pay for the latter.
Boot Camp Details

Windows and Mac Pro w/ Apple RAID card

It happened i have a need to run Windows natively on Mac Pro with Apple RAID card installed.
I know there is no Windows driver for that card, but i had a hope to bypass RAID card via connecting of internal SATA drive directly to iPass(SSF-8087) connector of Mac Pro's motherboard and using of that drive for Windows.
So, i've connected SATA drive this way and it works fine with OS X.
But i can't even try it with Windows because Mac Pro doesn't boot up from Windows installation CD if Apple RAID card installed
Empty black text console is all that i've got after selecting of Windows installation CD in EFI boot menu.
I need a suggestion how to bypass my problem, or generally speaking, how to install Windows onto Mac Pro with Apple RAID card.

I've tried that.
Installation and booting of WinXP passed OK if RAID card removed.
But i've got black screen again trying to boot WinXP after RAID card re-installed.

Mac Pro RAID 5 disk goes offline frequently in a random way. What can be causing this odd behavior?

Hi dudes,
I installed recently two Mac Pro RAID cards inside their corresponding Mac Pro systems. Four 2 TB Hitachi SATA disks are contained inside each system, and configured as RAID 5. Yes, the operating system is installed on this RAID 5 volume in order to get the highest performance of the array, taking advantage of the RAID 5 protection (Autodesk Smoke runs in each system; this application works only with uncompressed video in real time). I already had tested both systems keeping separated the boot disk just for the operating system, and making the RAID 5 volume just with three 2 TB disks, but the performance was slow on both systems.
The performance is now very good, but unfortunately, in both systems happens that sometimes one of the disks goes offline with no apparent reason. The RAID Utility immediately reports the failure and it is mandatory to declare as spare the disk that went offline. Then the rebuild process begins, but in the meantime, the performance goes down in a noticeable way. Sometimes it is even worse, because the disk disappears completely. Then, it is mandatory to turn off the system, and boot it up again, in order to see in the RAID Utility the missing disk, which needs to be declared as spare in order to be reintegrated into the RAID 5 volume in a slow rebuilding process.
Some important remarks: this very new Mac Pro systems do not have the iPass cable (at least apparently; I already disassembled completely one of these systems). This cable is mentioned in one Mac RAID card manual that I found over the internet. The diagrams do not match exactly with the Mac Pro nor the Mac Pro RAID board. I did not find a proper iPass connector in any of the Mac Pro RAID cards (?!). So, my guess is that currently the communication between the system and its Mac Pro RAID card is just by means of the internal bus. I think that if the iPass connection were mandatory, the RAID Utility would report it with a noticeable error message. Please advise.
I think that these Mac Pro RAID cards need a firmware upgrade, in order to be able to work fine with big SATA drives. Again, please advise.
Thanks in advance from Mexico.
Sincerely,
Martin Ponce de Leon

Hi Grant,
Thank you for your prompt response. The manual is a PDF document issued by Apple and it seems OK, but no updated to the latest Mac Pro system and Mac Pro RAID. I do not find the link where I found this manual. The systems belong to one of our customers. As far as I remember, in the printed manual included with the boards, it is not mentioned anything about the iPass cable, just about the battery cable. Do you know where can I get a PDF manual of the latest Mac Pro RAID card and the latest Mac Pro system? This client is far from our offices. So, I would prefer a PDF copy of this manual.
The drives that have gone offline, once they are back, are reported in a good status in the RAID Utility. Besides that, I have tested them in another system in our facilites, and all of them work fine. So, my guess is that the high capacity drives are not yet supported by the Mac Pro RAID card, or it requires a firmware update.
They do need to have in the same volume OS and video storage because three disks do no provide a good performance (they need also RAID 5), but four disks work fine... excepting when one disk is missing. Please advise. Thank you.
Best Regards,
Martin

" help me please" I have Windows 7 installed on my mac pro and Bought Mini DisplayPort to VGA Adapter to connect to lcd tv But it does not work? why? please help me

" help me please" I have Windows 7 32 bit installed on my mac pro and Bought Mini DisplayPort to VGA Adapter to connect to lcd tv But it does not work? why? please help me
I have to boot with a Windows
When I use the Mac operating system not have a problem and DisplayPort to VGA Adapter Working properly
why does not work with windows ?
What should I do؟
I'm grateful to give advice
tanks
[email protected]

Someone in another section answered this. Thanks.

Mac Pro RAID 0 setup with bootcamp

I'm about to take the plunge and buy a Mac Pro as soon as I get the money (or credit) to. There have been things here and there that have turned me off but I found ways around some concerns, but this one I haven't been able to find.
I am a musician and want to utilize raw power that Mac does so well with. But unfortunately my DAW of choice doesn't support OS X. I hate Vista, I never upgraded, I stayed with XP but have been willing to change to OS X with XP as well, to get the best of both worlds. Then i find my DAW doesn't support XP 64 bit so i am going to have to use Vista 64-bit (bummer).
What I haven't been able to figure out is if it is possible to run a RAID 0 of the windows OS and all its data. The Mac Pro RAID card doesn't support any Windows OS so i am wondering if there is anyway possible to get the Windows OS in RAID, any good hardware or software that will accomplish this. Like if i get the Mac Pro RAID cad, is there a good software or hardware RAID that will allow me to install windows in a RAID 0 configuration?
If its possible I would have no reasons to not move over, but I really need to have my RAID setup in windows since I am using latency sensitive disk streaming programs that need to stream files in the GBs
Also could I just opt out for the Mac Pro Card and get a generic RAID card that supports both Windows and OS X? And if so any recommendations?
Message was edited by: jmoss211

I'm glad you are in the planning stages!
The question I didn't know to ask is always the one that bites the worst.
One of the best options might be the RR 4320
http://www.hptmac.com/US/product.php?_index=50&viewtype=details
http://www.barefeats.com/hard109.html
http://eshop.macsales.com/item/Highpoint%20Technologies/RRAID4320/
One of the first Mac Pro RAID and Boot Camp work?
Games, hence the whole gaming graphics area, has and is not high on the list of features, which had been a large reason for people installing Windows on Mac.
I didn't want to see you invest in SAS and not get performance level you want.
StorageReview Performance SCSI/SAS vs VelociRaptor
Here is the card Barefeats felt was the card that Apple has to beat, and points to some of the limitations of SAS on the Mac Pro. http://www.barefeats.com/hard104.html
MacWorld SanFran in a couple weeks is when Apple traditionally would use to announce some of the new products for the next year (Snow, Mac Pro '09, new iMac, etc).
Apple is not very upgradeable. It would cost me more to upgrade the cpu than buy new (though can get a good $$ on my system - in part because it runs the prior version of OS X 10.4 "Tiger". New systems will only run the current/latest OS, you won't be able to run Leopard if a system comes with Snow. The graphic choices and upgrades can be lame. It is almost a closed box.)
I've talked to people that were into audio that used Fibre Channel in part due to low latency, increased queue depth (which is one area SATA has never implemented, 32 vs 256 I/O per sec).
+Forget trying to use the Apple search to find threads, it is 'busted' if I can't find the thread mbean and I had with someone only last week on RAID5/6. I turned to Google to find this thread +
Multi-core compiler optimization is big on Santa Intel's wish list to get into the hands of developers and vendors.
*3 GHz Nehalem outperforms the latest Opteron by a margin as high as 80% and more.*
Intel has apparently allowed HP and Fujitsu-Siemens to break the NDA on the Xeon 5570 processor for PR reasons as both companies have published SAP numbers on a Dual Xeon 5570. The Xeon 5570 is based on the same architecture as the Core i7. It is a 2.93 GHz quad-core CPU with 4 times a 256 KB L2-cache and one huge shared 8 MB L3.
http://anandtech.com/weblog/showpost.aspx?i=532
And AMD just gave Intel a new run for the money.
AnandTech’s Johan de Gelas has taken a look at AMD and Intel quad-socket servers. The quad-socket six-core Intel Xeon X7460 at 2.66 GHz is compared to the quad-socket four-core Shanghai-based Opteron 8384 at 2.7 GHz. And what were the results of a test using VMware’s ESX Server 3.5?
Shanghai’s 16 cores outperformed Dunnington’s 24 cores (or 48 if Hyper-Threading was used) by 6.5% or 8.8% depending on whether or not IBM or Dell’s chipset was used. But if we normalize that out per core, Shanghai outperforms by 59.8% (per core) or 63.2%. That is unbelievable!
http://www.geek.com/articles/chips/amd-cleans-up-in-high-end-server-virtualizati on-20081223/

Leopard/Bootcamp/Mac pro RAID Card

The last two bullets in the "More Info" section of Apple's Mac Pro RAID card read as follows:
• The Mac Pro RAID Card is required when selecting 15,000-rpm SAS drives.
• The Mac Pro RAID Card supports Mac OS X only.
Five Apple tech reps have told me I can run Leopard on a striped array of three 300GB SAS drives and then, via Bootcamp, use the fourth independent 300GB SAS drive to run Windows XP. I ordered a $10,000 G5 tower on this premise and now, today, a sixth Apple tech rep tells me it cannot be done. Each time I've called, I get a somewhat different answer. Does anyone have actual experience with a G5 such as this? Is there a third party RAID card that will work? If necessary, I still have time to cancel my order. Why would Apple build a RAID card that is not compatible with a most important feature of Leopard--Bootcamp? I don't understand their philosophy. They seem to work at biting the hand that feeds them.

Kappy, thanks for taking time to try to answer my question. I'll state it more clearly.
At this moment I'm typing on a 3 GHz Dual-Core Intel Xeon machine with four 500Gb drives. Three drives are configured as a RAID 0 Volume running Leopard. The fourth INDEPENDENT drive is partitioned via Bootcamp into two bootable volumes--one with Leopard and other with Windows XP Professional. For the new machine I would like to purchase, I never intend to run Windows from a RAID volume. My beef with Apple is that their high performance 15,000 rpm SCSI drives require their RAID card to function, whether it be in a RAID set or independently. Their interface to the motherboard is through the RAID card. Apple has not written Windows drivers for their RAID card. Consequently, if I intend to run Windows on their latest Mac Pro, I cannot install the high performance 15,000 rpm drives. I simply would like to configure the new machine the same as the one I have now, which is three drives combined in a RAID 0 array running Leopard, and the fourth drive remaining a stand alone for Bootcamp to partition into two bootable volumes--one with Leopard and one with Windows XP.
In summary, there is no way to use Apple's highest performance Mac Pro in a Windows environment. I think that's inconsiderate of Apple. I would like the performance of 15,000 rpm SCSI drives (RAID or not) but I also need Windows XP. I'm sure many others will face the same dilemma. Apple should give this matter a high priority and churn out the sorely needed drivers. So back to my original question--five Apple tech reps said I can configure the machine as described above and it will work fine--the sixth rep said there is no way it can work, because their card cannot run Windows. Who should I believe. I don't want to make a ten-thousand dollar mistake.
P.S. The configuration shown below is for the machine I hope to purchase, not the one I'm using now. This one is a 3GHz Dual-Core Intel Xeon Mac Pro.

Can i use imac's internal CD/DVD drive to install windows 8.1 pro on macbook via ethernet or firewire or other than purchasing an external drive??

can i use imac's internal CD/DVD drive to install windows 8.1 pro on macbook via ethernet or firewire or any method other than purchasing an external drive??

Note: These types of discs or activities are not supported by DVD or CD sharing:
DVD movies.
Audio CDs.
Copy protected discs such as game discs.
Install discs for an operating system such as Microsoft Windows (for use with Boot Camp), or Mac OS X.
Burn a CD or DVD

Sleep or Shut Down with Mac Pro RAID Card?

I'll be gone for a four-day weekend trip, which is longer than the 72 hours claimed for the Mac Pro RAID Card battery. If I shut down and come back four days later, the battery will presumably be discharged. What will happen when I restart?
Asked another way ... is 72 hours the maximum amount of time that the computer should be shut down or do I simply restart and wait for the battery to recharge and the write caches to be re-enabled?
The FAQ for the Mac Pro RAID Card http://support.apple.com/kb/HT1346 talks around this issue, but doesn't say whether it is a good or bad idea to allow the battery to discharge for "... any length of time." Please review the appended excerpt from the FAQ and advise on whether I should sleep or shut down.
Regards,
iPhoton
Question: Why does RAID Utility show a yellow light and report the status "Write cache disabled"?
Answer: The write cache is disabled automatically so data cannot be written to RAID volumes when the battery charge is not sufficient to back up cached data for 72 hours. This message is normally encountered when a RAID Card is used for the first time, when the battery enters a conditioning cycle once every three months, or when a computer with a RAID Card installed is shut down for any length of time.
If your RAID card's firmware is M-2.0.3.3 or later, or E-1.2.2.4 or later, you can use RAID Utility to force-enable the write cache while the battery conditions itself. Warning: If you enable the write caches before the battery is fully charged, you might lose some data if the power to your computer is interrupted.

Thanks to everyone who replied to my message. I did a proper backup and normal shut down on Wednesday night and restarted on Monday morning. That was over 100 hours later and certainly more than the battery is specified (72 hours).
When I restarted on Monday morning I noticed ... no change! The battery was fully charged according to the RAID Utility, I received no warning messages, there were no new events in the RAID Utility log ... it's as if the extended shutdown never occurred.
So, an extended shutdown appears not to be a problem and I won't worry about it again, not even on my next extended shutdown for three weeks at the end of the year.
Regards,
iPhoton

How many Sapphire Sapphire RADEON R9 270X can i install in my mac pro 2009?

How many of the graphics cards can I install in my mac pro 2009? Sapphire Sapphire RADEON R9 270X
Thanks

Why? do you use FCP-X? that will benefit from two. Also gaming in Windows where you can use Crossfire
You have two 6-pin power feeds so you will need a small 450W PSU - those come with two 8-pin and two 6-pin.
Those can often fit in the optical drive bay and cost $25-75 range.
"500W" is NOT for the card! that is the minimum PC PSU only!
when buying look for card that uses only two 6-pin and not an 8-pin power.
75W for the PCIe slot, and 150W from two 6-pin cables, most GPUs fall into the 200-250W at maximum stress levels8-pin is basically two 6-pins and 150W feed
> we CrossFired a pair of Radeon R9 270s in our 2010 Mac Pro tower. Under Windows 7 64bit Ultimate, it registered 145 FPS in the Diablo test.
http://barefeats.com/tube06.html
Keep in mind that the Mac Pro tower can't feed enough power to the dual 980s, dual 290Xs, or dual 7950s.
We used an auxillary power supply to compensate.
For the hard core GPU rendering, there are external expansion boxes with their own power supplies.
In an earlier article, we featured the Cubix Xpander which facilitated the connection of 5 GPUs to the Mac Pro tower.
If you favor an AMD GPU like the Radeon R9 290X, MacVidCards can modify it to run at PCIe 2.0 bandwidth in your Mac Pro tower.
The Sapphire Radeon R9 7950 Mac Edition is available from OWC and TransIntl.
February 6th, 2015 -- Dual GeForce GTX 980s vs other Dual GPUs running multi-gpu 'aware' apps
February 6th, 2014 -- (UPDATE) GeForce GTX 980 GPU versus 8 other GPUs running Games and OpenGL Benchmarks
January 29th, 2015 -- GeForce GTX 980 vs 9 other GPUs running Resolve, LuxMark, and Octane Render
December 28th, 2013 -- Does Final Cut Pro X 10.1 render faster on Mac Pro towers with Dual AMD GPUs? What about Motion 5.1?
Things to keep in mind:
The Radeon R9 280X we used was 'un-flashed.' It booted OS X fine but there was no startup screen. Also, when we checked the speed of CPU-to-PCIe-to-CPU communication, it appeared to be running in PCIe 1.0 mode instead of PCIe 2.0. However, unless the GPU intensive app saturates the PCIe 1.0 bandwidth, it will not run any faster in PCIe 2.0 mode. http://barefeats.com/tube12.html
Which is one reason why you might want to buy pre-modified cards from http://www.macvidcards.com

Mac Pro RAID

I'm thinking of purchasing a Mac Pro RAID card, install 4 x 3TB disks in my Mac Pro and use it as a file server.
I want to configure these 4 as a RAID 5.
Is this possible to do? Can this be done in the setup process of OS X server?

The Apple Pro RAID card is the problem.
There is excellent software RAID for Mac OS; there are 3rd party external hardware RAID controllers.
You asked about RAID card.
the rest, there are any number of ways to go about it.
Guide Which Mac Pro
Mac Performance Guide Reviews

WinXP Home install problems on Mac Pro

Hi,
I have a brand new Mac Pro Dual 2.66GHz. It came with a second GeForce 7300GT installed. I installed additional 2x 1GB FB DIMMs. Everything worked fine, and I installed all new updates, including the new EFI Firmware update Apple introduced yesterday. After the OS X setup was complete, I downloaded BootCamp 1.1.2 and followed the instructions to create a 30GB partition for Windows XP Home. I insert the WinXP CD and let BootCamp restart the computer. WinXP boots and the blue screen appears and a bunch of drivers get loaded. After that I get the first install screen, and on that point the keyboard is not responding anymore. I can press "return" as often as I want, the install does not start. It also not responds to F3 or R as written on the screen. Its the first time Windows gets installed on this Mac Pro. I also tried to connect the keyboard directly to the computer (before it was on the cinema display hub). I tried to remove the RAM to have only the standard 1GB RAM installed. Nothing worked.
Anyone have a hint to get this done? Thanka a lot on advance!
Marty

I already thougt about that, but Apple put a note on the page:
http://www.apple.com/support/downloads/firmwarerestorationcd12.html
"Note: This CD cannot be used to return an Intel-based Macintosh computer’s firmware to a previous version if a successful update has already been performed."
So because I did a successful fimware update, I can not go back to the old firmware! There is no way back!

Installing windows on MacBook Pro

I am looking into installing Windows on my Pro because I need Visual Studio for programming and just need some questions answered.
1. Is there a Mac native alternative to Visual Studio? I am using it for a Visual basic class I am taking and we are creating windows applications.
2. Can I buy an external hard drive to run Windows OS from? I opted for the ~256gb SSD MacBook Pro and am not wanting to waste storage space on Windows OS, especially since I do not foresee using it after this class.
3. If I cannot run Windows from an external hard drive: How easy is Windows installation, as well as how easy is it to remove Windows OS when I am finished using Visual Studio? Are there risks to my MacBook accompanied with Windows installation?

1, No
2, No, Microsoft doesn't allow that
3, Read http://manuals.info.apple.com/MANUALS/1000/MA1583/en_US/boot_camp_install-setup_ 10.7.pdf

Install windows 7 on mac pro raid

Similar Messages

Maybe you are looking for