Install windows 7 on my macbook pro with bootcamp.
I am trying to install Windows 7 off of a dvd version of windows on my macbook pro with bootcamp. I have gotten to the installer screen of windows 7 and each time I proceed, I get an error message saying it does not recognize my drivers. I installed the drivers from bootcamp on a freshly formatted usb drive. I don't understand why it won't read the drivers.
SchafHund wrote:
the computer model is a 13" a1278 mackbook pro mid 2011 and its windows 7 premium.
32 bit or 63 bit Windows?
From the Boot Camp System Requirements page located here: http://support.apple.com/kb/HT5634, there is no mid 2011 13" Macbook Pro.
Here are your choices and the correct Windows Support software version to use:
MacBook Pro
(13-inch, Late 2011)
5
5
4
MacBook Pro
(13-inch, Early 2011)
5
5
4
Similar Messages
-
Hi, I am trying to install Windows on my MacBook Pro with bootcamp. Every time I open bootcamp I am only able to check the first two boxes but not the third one saying "install or remove Windows 7". I did this before using the same computer and the same hard drive so I am not sure why this is happening now but did´t happen then. Any solutions ?
Was your Bootcamp info.plist manipulated to change any options?
-
I can't install Windows 7 on my Macbook Pro with Retina disaply
Hello,
I'm having a issue installing Windows 7 on my Macbook Pro with Retina (mid 2012), it has no CD drive so I'm able to use Disk-On-Key only.
I've create a partition of 35GB in BootCamp for installing the Windows, then the Bootcamp is restart my machine, and bring me to the windows installer
I got errors that the machine doesent recognize my hard drive.
I would add some pics, but my installer is in Hebrew lang.
please help me guys!Post here:
https://discussions.apple.com/community/windows_software -
If I install Windows 7 on my MacBook Pro using Bootcamp, now having 2 start up drives, do I select the Windows drive, then I can install a software program that runs only on a PC?
Thank you
-
Can't install windows XP to a macbook pro with an Intel X25-M SSD
It's a strange problem:
We just bought some new unibody macbook pro 2.8Ghz machines, (4GB ram)etc. We also obtained some of the new Solid State Drives (SSDs) from Intel, the X25M-80GB.
(part number: SSDSA2MH080G1C5)
After installing the SSD into the macbook pro, everything works.....in OSX. Installation of 10.5.5 went without problem, all updates/firmware applied, everything works fine.
The problems start when you try to install XP. We used the boot camp assistant, and created a 32GB partition, put in a XPSP2 disk, and start the installation.
Everything starts up nicely and goes to the blue/white text based installer for XP. It loads drivers, and then reaches the point where it would ask you to select a disk to install to (where you would normally see the three partitions, 1 being the FAT32 you select as C:).
However, what you get instead is an error message that: +"Setup did not find any hard disk drives installed in your computer...."+ and then you have to exit.
If you use the original 320GB drive, everything works as expected, (nothing wrong with the laptop hardware, or the installation CD). If you stay in OSX, everything works as expected. (nothing wrong with the Intel SSD either)
To further add information, we also installed the Intel SSD into a Mac Pro (2008) as a second drive, booting to a windows installation (through boot camp) on the first disk. Windows boots fine, but there is no sign of the other drive AT ALL. (not a driver issue here - there simply isn't any hardware here as far as windows is concerned.)
That brought us to our conclusion that there is something awry in the BIOS/EFI
being presented to Windows, that doesn't support the Intel X25M drive at all.
However, there is no user customisation (or even access) to the settings or what's happening at that point in the boot cycle, so I'm unable to diagnose further.
Given the Intel SSDs are using their SOC (system on a chip), (I believe - but I could be wrong on that one) perhaps that just isn't supported by the EFI?
Would appreciate some advice on where to go from here? These SSDs cost about 1400AUD+ each, so we'd rather like to actually use them....
I suspect we're asking/requiring for an EFI update.
(to head off some questions: Yes, we've used different discs, and also different computers...The disk and hardware themselves are just fine. Also, the drive WAS formatted with a GPT paritition.)
Thanks!From reading Vista forums support for SSD is one of the things Vista SP2 and Windows 7 hope (need) to improve upon. I was in a similar discussion once befoe on SSDs:
http://discussions.apple.com/thread.jspa?messageID=8482110
http://news.cnet.com/8301-13924_3-10026010-64.html
http://www.intel.com/design/flash/nand/mainstream/index.htm
http://www.google.com/search?hl=en&rls=com.microsoft%3Aen-US&q=IntelSSDVista
I don't think it is EFI issue, but with XP and drivers, lack, and wonder if you can try with Vista?
http://arstechnica.com/news.ars/post/20080908-intel-tosses-hat-into-ssd-ring-wit h-80gb-launch.html
That won't solve performance issues, but should work.
http://www.reghardware.co.uk/2008/07/22/sandiskssd_vistabeef/
"My guess is that [Samsung and Microsoft] are maybe working on the OS recognizing an SSD with a 4K-byte sector size instead of a hard disk drive with a 512-byte sector size," Wong said.
Sun is already working with Samsung to bulk up SSD support on the ZFS (Zettabyte File System), which is included in the Solaris OS, and will also be supported in Apple's upcoming Mac OS X 10.6, codenamed Snow Leopard. Sun is adding capabilities to boost the durability and performance of SSDs on ZFS-based operating systems. For example, Sun may add defragmentation capabilities for SSDs, which organizes data in a particular order to enable quicker data access.
SSDs were not considered ideal for defragmentation because of limited read-and-write capabilities, Wong said. However, Samsung and Sun in July jointly announced an 8G-byte SSD that bumped up durability from 100,000 read-and-write cycles to 500,000. That brings defragmentation in SSDs closer to reality, which could improve its caching and provide quicker access to data. Sun plans to put SSDs into storage products later this year.
http://www.itworld.com/operating-systems/54115/samsung-microsoft-talks-speed-ssd s-vista -
How to Install Windows 8.1 on MacBook Pro with Retina Display Using Boot Camp?
Hello,
I own a MacBook Pro with Retina Display and was wondering how do I install Windows 8.1 without an optical disc drive? I have bought the full version of Windows 8.1 and would like to partition it on my MacBook Pro. Could someone please help me out by posting step-by-step procedure or a video on how to do it? It is my first time partitioning the Windows operating system and would like to clarify with the community on this before I install it.
Thanks in advance for those who have helped!Windows 8.1 is not yet supported by Boot Camp. The best way currently to install Windows 8.1 is to use a virtual machine like Parallels, Fusion, or VirtualBox. Installation instructions are on the Parallels, Fusion, and VirtualBox site.
-
I have the latest 13" Macbook Pro with Retina Display. I just recently installed Windows 7 through Bootcamp assistant but when I am in Windows the internet doesn't work. How can I fix this??
I found where to download it in bootcamp, I just can't find my usb drive I will need to buy a new one and then give it a shot. I am sure I will be back to ask more questions... thanks for your help.
-
Installing windows 7 on a macbook pro with retina display
Hi All -
I just purchased a new macbook pro with retina display and I want to install a copy of windows 7 on this machine. I've gone through numersous postings online about the proper way to do this - and I had a few questions as it is a little confusing.
What I have:
15" macbookpro with retina display
External superdrive
Physical copy of windows 7 64 bit
a burned image of the windows 7 disk (as a .CDR file)
Several postings have indicated that I need a flash drive; is this the case if I have the actual disk and the superdrive I can use for reading it?
If not and I do in fact need a flash drive - I have an 8gb with encryption software on it - if I need to make an autoboot for the windows .cdr is there a special way to do this or will the .cdr image work as it is?
I appreciate any help provided.
Thank you
LennyHi - I connected my superdrive but it does not seem to be working - now all I get is a black screen with the prompt - no bootable device; insert boot disk and press any key.
Any thoughts on this? I put an ISO image on my desktop and also created an image on a USB drive - however it has encryption software on it which did not get overwritten so Im not sure if this is why that won't boot.
Does anyone know if the Superdrive can't be used?
My macbook is 3 weeks old - it is all the latest and greatest stuff... -
HT3986 how do i install windows 7 to my macbook pro with retina display
i want to install windows and games like flight simulator onto my macbook how do i do it
http://www.apple.com/support/bootcamp/
Also search this forum for instructions.
Also run Boot Camp Assistant and follow the instructions.
You will need to invest in an external dvd drive if you have Windows on a dvd. A usb stick can be used if you are downloading Windows. You will also need to save the Windows Support software to the usb stick. Read the help files. -
Can't Install Windows 7 on 2011 MacBook Pro with WD HDD
When I install windows 7 vía boot camp the instalation geoes well until the compueter restarts, then it is stuck on "completing installation" it is weird because I was able to install windows 8 and it worked perfectly but I just had issues with programs mado for windows 7 that do not run on windows 8.
Post here:
https://discussions.apple.com/community/windows_software -
Can't install Windows 7 on my Macbook pro.
Hi, I've been trying to install Windows 7 on my Macbook pro, with no luck. I have been able to create a Windows Partition via Bootcamp. And after the Windows 7 installation guide started to expand my Windows files, my Windows 7 CD suddenly stopped spinning. And after a while, the installation guide said that Windows couldn't be installed. And I had to turn off my Mac.
Post here:
https://discussions.apple.com/community/windows_software -
I'm trying to install windows 7 on my macbook pro. I went through the process of bootcamp telling it to install windows 7. Once the windows boot manager started an error message came up. The error message says " windows has encountered a problem communicating with a device connected to your computer. I don't have a usb connected to my computer. I am using windows 7 professional install disc. I can't figure out what i am doing wrong. The same message keeps coming up over and over. Am I doing something wrong or is it something else?
Well, shucks, i just spent almost 30 minutes trying to find your model user guide to explain it better, I guess they never got around to making it.....
I would just borrow another Windows disk and try installing it again and if it does it again then you might take it to an Apple Store and see if one of the "Genius' " can figure it out.
Make sure your internet is enabled and click on your blank desktop and at the top of your screen is a Help menu option, enter PRAM and it should give you a list of things relating to Pram. It may take a few seconds to list anything as it has to connect to Apples severs first. It should list the things you may have to fill back in when your done.
"P-ram" stores some common information that is used in the background, your date, time, startup disk, etc, that you don't have to re-fill when you restart, it's a little different for each computer. -
I have installed Windows 7 into my Macbook Pro 15 inch with Lions as operating system. (current model with 2.2 GHz i7 processor, 500 GB HD ad 5400 rpm). When I started with boot camp, the system promped me to create a disc, which I presume is for the drivers for windows 7. Now windows is intalled. What do I do with the CD that the system created for me? Also, why does the system automatically start in Win7 instead of Lion. I need to pression the option key to have it start in OS X. I thought it was supposed to be the opposite.
Insert it while you are in Windows, if it does not autostart run setup.exe.
Choose your startup disk using Apple>System Preferences>Startup Disk (in OSX) or Control Panel>Boot Camp>Startup Disk (in Windows) -
Problem install windows on mid 2010 MacBook Pro 13 with 10.9.1
I run into problem install windows on mid 2010 MacBook Pro 13 with 10.9.1. Boot Camp Assistant shows error "Can't install the software because it is not currently available from the Software Update server.". So what is the problem and how can I work around it? I also tried to only chose "Install Windows 7" option, but it could not recognize my windows dvd (which I created from ISO). Any help is appreciated.
I run into problem install windows on mid 2010 MacBook Pro 13 with 10.9.1. Boot Camp Assistant shows error "Can't install the software because it is not currently available from the Software Update server.". So what is the problem and how can I work around it? I also tried to only chose "Install Windows 7" option, but it could not recognize my windows dvd (which I created from ISO). Any help is appreciated.
-
i Installed windows 7 on my macbook pro 13 inch Late 2011 with bootcamp, i have no wireless icon or bootcamp icon, i checked my flash drive and it is blank!! what do i do?
Download and intall the Windows Support software. You can start Bootcamp Assistant again and only select the option to download the support software. Then follow the instructions to save and install the support software.
Or, manually download the support software here http://www.apple.com/support/bootcamp/downloads/.
Maybe you are looking for
-
Hi, I have Adobe Creative Suite 5.5 Design Standard pack on CD drive and wish to install it onto my newly purchased Mac Book Air. Problem, there is no CD drive I can use. Have you any suggestions for me?
-
Under the column firld value new variable needs to be displayed in
hi i ahve a query presently in sap script output in main window these three fields are coming i want to add a new line ie bar code for the field value which is coming below it example present output number item total amount unitvalue 001
-
Count Specific Value in Column as a Total
I am using Oracle 10g, In my worksheet i have created column using Decode Function.I would like to count Flag='Y'(not using group sort). Could anybody help me on this problem Eg: Entered Employment At Exit Y Y N Y N Y Y Total = 5 Thanks, Vikram
-
No Preview in Folio Overlays panel
When I click Preview in the Folio Overlays panel, nothing happens. The screen tip says the Adobe Viewer application must be open in the foreground, but I can only find the viewer for the iPad, not for the iMac. I have the box version of InDesign CS6
-
ERROR:Start of root element expected
hi, Can any one tell me what this error was. I am getting this error when i try to update a table. XML-0108: (Fatal Error) Start of root element expected. oracle.xml.sql.OracleXMLSQLException: Start of root element expected. at oracle.xml.sql.dml.Ora