Install windows 7 via usb and bootcamp

Okay guys, its been 5 days now going thru this MESS!
-I own a MacBookPro Early 2011 (MacBookPro8,1)
after now 3 years my superdrive is broken...not able to read CDs any more.
I try to get Windows 7 on this piece of computer, but Bootcamp only offered my to install via CD
-After days of searching I did the following:
.I edited info.plist of bootcamp to enable the bootcamp option of a usb stick installation.
.I created a WININSTALL usb stick with bootcamp. Bootcamp restarts and show:
no bootable device found. pls insert cd and press any key
after an other da of searching i found out to use gparted to format the usb into a fat32 format and then copied to this usb the files of WINISTALL usb stick
then i rebooted --- no device found---rebooted again pressing alt -----i was able to select the wininstall usb---and it opens gparted setup window -.-
seriously guys, what is this???? does it needs to be so complicated to just install windows 7 without a cd drive ( which is **** getting broken so fast!!)
Now I really have no clue how to continue, maybe sell this macbook and just buy a windows ? Definitly last time I owned an mac anyways

cool to get any feedback too...

Similar Messages

Installing Windows via DVD? Bootcamp.

Hey there, recently I have had alot of problems with my super drive and the thing is that it cannot read any cds at all, or its very rare that it reads one, however, it can read dvds. I really want to install Windows XP and im wondering if its possible to install it from a dvd as oposed to a cd??

You should probably post that question on a Windows forum such as
http://forums.windowsitpro.com
http://ms-windows.com/forum/
http://forums.windowsforum.org
Or in the Boot Camp forum:
http://discussions.apple.com/category.jspa?categoryID=237

Is installing Windows via bootcamp bad for my hardrive? (It crashed)

Hello,
I purchased my new Macbook Pro 13" in January of this year, and my hardrive recently completely crashed. I was lucky enough to have Apple pay for a new hd, but I really want to know what caused it. The only thing I can think of that makes any sort of sense is that installing Windows via bootcamp screwed up the hardrive somehow and caused it to fail from getting worked too much from always restarting into Windows / having too much of my hd dedicated to Windows (150 gb of my 750gb SATA hd). I dont know if any of this makes sense, or if I just got really unlucky and got a bad hd from the factory. I have never physically damaged my macbook (like dropping it or whatever) and have never stored it in extremely hot or cold temperatures. The copy of Windows I installed was legit and everything....so I am scared to reinstall windows in fear that my hd will fail again
So my question is this...... is there any way that the bootcamp partition could have cause my hd to fail? Is it safe to go ahead and install windows again?
Thank you for you time.

I have never heard of bootcamp causing hard drive failure. I think it is more likely that you were unlucky and ended up with a bad drive. Something like 1 in 100,000 fail, that 1 has to land on someone. If you are worried about bootcamping again I would recommend Parallels or VMWare Fusion. They are both excellent virtualization applications and offer a soft cap on the windows partition size because it is a file kept inside of OSX instead of a physical partition. I have been running Parallels for 6 months with no problems.
Best,
Stuart-

Hi there, I've upgraded my Snow Leopard iMac to Yosemite 10.10.1 and would like to install windows 8.1, but bootcamp keeps telling me my mac only supports windows 7. Is there a way I can change that, please?

Hi there, I've upgraded my Snow Leopard iMac to Yosemite 10.10.1 and I would like to install Windows 8.1 using bootcamp. However, there's a pop-up saying that my Mac is only supporting Windows 7. Is there a way to change that, please? Thanks

Please find your Mac Model Identifier from About This Mac -> (More Info) -> System Report -> Hardware and compare it to the following list. If your model identifier appears in this list, you can only install Windows 7.

My Internal HD became corrupt and it would not boot up so I installed My osx onto a new HD via usb and then inserted into my macbook pro but it wont boot up. It will only boot up if i connect via usb how can i boot it as an internal HD?

My Internal HD became corrupt and it would not boot up so I installed My osx onto a new HD via usb and then inserted into my macbook pro but it wont boot up. It will only boot up if i connect via usb how can i boot it as an internal HD?

Shootist007 wrote:
If the system won't boot from the new drive the OP bought and install OS X on it it certainly won't boot from the original drives Recovery HD partition.
Sorry genius.....but if the Recovery disk shows up that means the disk cable isn't bad. Could be he did have a screwed up HDD and when he put the NEW HDD in (after putting the OS on it via USB) the computer didn't reconize it and therefore didn't boot the OS. Just maybe right genius? Don't rush to criticize someone's recommendations until you realize other possibilities. (I did say "if it does")
Thank you

I have recently installed windows XP on my bootcamp partition. I am in need for the drivers and what not so that it will run effectivly and the bootcamp assistant canot find the "Windows Support Sofware" Can anyone help me find it manually?

As the title has stated, I have recently installed Windows XP on my Bootcamp Partition. I am in need of the "Windows Support Software". I am assumeing that is the information that has the Drivers and what not that allow me o properly use my Mac with windows. If anyone can help me locate this inforamtion i would be greatly.... Greatfull.
P.S. The bootcamp assistant is telling me that the Windows Support Sofware canot be found.

You both would have had correct awnsers, but i have a Macbook that is close to three years old. And i can't seem to find my Disc. The only reason i haven't ordered a new one in case of emergencies is I plan on upgrading to the new OS in less then a month.
I think the following may help me (In case anyone els is looking):
http://support.apple.com/kb/DL830

Bootcamp is not showing install windows 7 usb option please help

bootcamp is not showing install windows 7 usb option please help

Tom von Mom wrote:
So MacBook Pros with DVD players doesn't support booting from USB stick?
They don't support booting Windows from a USB stick.

Internal DVD Drive isn't working... must install Windows via Boot Camp

My internal DVD Drive has died. Just keeps ejecting every CD or DVD I put in it.
*The real problem is that i need to install Windows via BootCamp...*
I've already defraged my Hard Drive and partioned it for the Windows installation
But even using an external USB DVD Drive I couldn't get to boot up from it
to install Windows XP SP3.
BootCamp lets me use the windows disc that is inside my external DVD drive
and it even restarts... but after the restart chime, and the grey screen, it doesn't
start the windows installation... it continues to boot to my Mac partition.
(i've tried to manually change the boot disc in System Preferences, but it was in vain)
I also tried to use another Mac's DVD drive in Target Disk Mode... no results.
I even tried to Copy-Paste the entire file system of a Windows installation from a BootCamp of a friend but had no success making it to work.
*Is there any way I can install Windows with my external DVD drive?*
Because I don't have the cash for buying a new one right now...
And I really need windows installed via BootCamp...
Thanks in advance,

For this problem there no alternative > I bought a new internal DVD drive and then I was able to install Windows via Bootcamp.

How do I install windows from USB on Macbook pro 3,1

How do I install windows from USB on Macbook pro 3,1 ?
My Superdrive is far from super anymore, So I managed to make an extern drive with both Snow Leopard Partition, Lion Partition (Since I thought Boot Camp 4,1 would bypass my problem), and Time Machine partition, Since I got 1. USB drive that works.
- My general issue is that Boot camp Refuse to see the USB drive - (Many "how to"´s though show how they install windows perfectly through the USB port, but they use airbooks!, and somehow the Macbook will not ?)
I fix that issue with >> rEFIt <<, that suddenly makes it possible for the Mac to see the USB drive, and partitions.
Which was very strange since I could use an extern HD with the whole installation to start up wipe the whole disk, and then use my extern drive with partitions to install Snow Leopard and get everything as before with timemachine. Very smart with timemachine, but very lucky that I have a extern drive that runs the whole system and that I made the partitionsdrive before. DVD-drives are the past!
Point: So the original system could see the Snow Leopard installation USB disk, but boot camp cannot find the USB drive ?????????
After rEFIt I booted and then I got this error:
Starting bootmgr.efi
Error: Unsupported while loading bootmgr.efi
I read it could be a problem with the Windows software, so I purchased an extern DVD drive, Used Disk Utility to make an image (.DMG), then used another program to convert the .dmg to .ISO.
Then downloaded a trialversion of vmWare fusion, and installed windows from the iso. Everything worked brilliant, except and that is why I want to use boot camp, Running windows in another program while running the mac system is a little hacky and slow.
Point: Nothing is wrong with the windows software, and windows runs fine.
I then downloaded the Windows DVD / USB Tool, reformatted a USB drive as Master Boot Partition, MS-Dos Fat partition, then after lots of struggling got Vmware, windows to recognise the USB drive. And installed the windows software on the USB drive, as all the walkthroughs recommend.
Then I tried for "fun"! to just install windows form the extern USB drive, and with rEFIt it will see the drive and start to do something, but then when it starts to boot, the screen just turns into black and nothing happens, and you can see the drive does NOTHING. (I think it is because I only have 1 USB drive and the Extern DVD drive does not get enough power, but again the mac refuse to see the USB drive unless it is a Snow Leopard installation USB-drive!
Well trying to install Windows Ultimate 64 Bit, which worked great in vmware, because that program installed from the .ISO file that I had on the desktop, but trying with Boot Camp did not get anywhere, what kind of **** program is this boot camp anyway!?, but then I try the new USB disk with windows made from windows, thorugh rEFIt, it sees the disk and then starts and then I get this ERROR:
rEFIt - Booting Legacy OS
Starting legacy loader
Using load option ´USB´
Error: Not found returned from legacy loader
Error: Not found from LocateDevicePath
(x 9 times)
Error: Load Error while (re)opening our installation volume
The firmware refused to boot from the selected volume. Note that external hard drives are not well-supported by Apple´s firmware for legacy OS booting
(Hey Apple please send out a updated firmware that fix this issue?!)
So how do I do it ? - or is the only option to fix the partition running the system from the extern disk. Format the whole drive in 2 from the "bottom" and install windows and then afterwards install Mac on the other partition ? Or just run windows on the mac and forget about mac software ? What a stupid solution...

There are strings in the pliist file to add other Macs so that you can use some USB-DVD drives.
This is 5 page thread, so a little more 'meat' to it:
https://discussions.apple.com/thread/3410900?start=60&tstart=0
And on PC booting Windows from a USB DVD to do the install is usually a piece of cake, sometimes you just need to specify that USB in the BIOS boot order and sometimes select via F12 (or another Fkey) and that is it.
What you have here seems to be everything and everyone is excluded unless there is a mac-model device ID string that specifies yes. An unnecessary hurdle.

I can not use my mouse or keyboard when I am trying to install windows via boot camp

Please can you help!
I can not use my mouse or keyboard when I am trying to install windows via boot camp

Starting a couple of days ago my mouse and keyboard stopped working suddenly.
How are they connected? In my case they are wireless and their receiver is plugged into my USB hub. After an update I found the OS inexplicably not recognizing my USB hub and hence any devices which were plugged into it. My fix was to
plug the receiver into a different USB port (so I could use the mouse and keyboard; otherwise I would have had to use the OSK via Touch or pen.) Once I had normal access into my machine again I used Device Manager to remove all USB controller and
hubs (including hidden ones) and I then shut down, disconnected all USB devices and powered back up, this time using only Touch to get going. Once the OS had settled down I started plugging stuff back in the way that I wanted it to be recognized.
If I didn't have Touch I would have had to have left the wireless receiver plugged in both places which I assume would be OK. I have no idea why updates have such a catastrophic effect for USB devices.
Robert Aldwinckle

Can I install Windows XP SP1 with Bootcamp on my new Mac Mini 2011 i7 ?

Can I install Windows XP SP1 with Bootcamp on my new Mac Mini 2011 i7 ?

Baiscally if your Mini came with Lion Pre-installed new then No you can't use XP.
The Lion installed computers no longer support XP OR Vista via Apple's Boot Camp.
For one thing Apple only supported XP with SP2 in order to install it on pre Lion computers.
If the Mini had come pre-installed new with say 10.6 then you could have installed XP and still of been able to upgrade to Lion without any issues as you already have the drivers for XP installed. Lion only has the drivers for W7.

What is a good program to install windows via a flashdrive...Have the iso

What is a good program to install windows via a flashdrive...Have the iso...

What are you trying to do?
You can install Windows in a Boot Camp partition and have a Dual Boot system where you run one operating system at a time. Either Windows or Mac OS X.
Or you can use one of the 3 available virtual machine software parograms to install Windows in a virtual machine on top of Mac OS X. Then you can run both Windows and OS X at the same time.
If you go with the Boot Camp option then you really need to burn that ISO file onto a DVD disc as Boot Camp likes to install from disc.
If you go with the virtual machine option then you can use that ISO file as it is to install Windows. You will just point the VM to the USB thumb drive to find the Windows OS to do the install from.

HT5628 Has anyone successfully installed Windows 8.1 through bootcamp?

Need help installing Windows 8.1 through bootcamp. I would appreciate any guidance since bootcamp is asking for the iso file? How can I get the iso file onto the usb drive?

Short answer: I cheated.
I'm running a Macbook Pro 15" Retina display without an optical drive. Fortunately, I also have a Windows 7 box that I used to create a .iso from my Windows 8.1 Pro DVD, and transfered that onto a USB Flash Drive that I let Boot Camp Assistant work with to create the volume needed to set up Boot Camp and install Windows 8.1.
I read some articles that talked about being able to download an .iso from Microsoft directly. You might want to search online or the Microsoft site to find out options for downloading the correct .iso from them. As long as you already have the product key you purchased, it's not like they lose a sale.
Other than that, I couldn't figure it out.
If you're on an iMac or have a SuperDrive there may be options within Disk Utility to read the Windows 8.1 DVD and create a .iso file from there.
Can't swear to it, but if I couldn't have "cheated" those were the things I'd have investigated.
Good luck!

I wanted to install windows for Mac and I had vista so I put I the disk and installed it then it loses my computer wen I turned it on it went straight to windows and it asked me to install it and put in the windows box code I found out I didn't have Ma.

I wanted to install windows for Mac and I had vista so I put I the disk and installed followed the steps it then it closed my computer wen I turned it on it went straight to windows and it asked me to install it and put in the windows box code I found out I didn't have it so I wanted to go back to Mac I shut it off and it just goes back to windows and asks me to put the box code how do I get rid of it and go back to Mac because no buttons work at the start and i can't take out the disk !! Help

The two other posts are correct... so I'll just clarify. What's happening right now is your system is trying to boot into Windows in order to finish the installation. What you want to do is make it boot into OS X. As mende1 indicated, with your system off, hold down the Option key and continue to hold it while you turn the system on. You will eventually be presented with an option to select which partition you would like to boot from. Choose OS X. After you get into OS X, again, as mende1 indicated, change the Startup Disk to OS X. What this will do is cause your system to automatically boot into OS X when you restart it instead of you having to use the Option key when booting each time.
Relaunching BootCamp Assistant will allow you to remove your Windows installation and partition.

HT1846 gtp error while installing windows from usb! how to solve it.

gtp error while installing windows from usb! how to solve it.

Hello mmarti,
Thanks for using Apple Support Communities.
Please ensure you are following the Boot Camp installation guide, as you should be selecting the partition named "BOOTCAMP" when you are at the Windows installer screen. See page 6 of the following PDF:
http://manuals.info.apple.com/MANUALS/1000/MA1636/en_US/boot_camp_install-setup_ 10.8.pdf
Take care,
Alex H.

Install windows 7 via usb and bootcamp

Similar Messages

Maybe you are looking for