Install windows 8.1 without optical drive?

Hello,
Just bought windows 8.1 and i wanna bootcamp it. I have no optical drive on my mac. Where do i get an iso file on windows 8.1?

Excuse me for being blunt but that is simply b***hit. Windows 8.1 comes delivered with the machine which is brand new and  any reasonably new PC is fully capable of running Windows 8.x. The question was just how I was supposed to load it onto the machine as it lacks an optical drive.  I suggest you do not give advice unless you know what you are talking about.
For all others thatwant to the same thing.
1. Make a copy of the Windows 8.1 DVD that comes shipped with the machine. See the following guide http://www.intowindows.com/how-to-install-windows-7vista-from-usb-drive-detailed-100-working-guide/
2. Set Boot mode in BIOS to UEFI instead of legacy BIOS.
3. Boot from the USB stick and install Windows 8.1, wipe all existing partitions. Please note that this will effectively remove any possibility to revert to Windows 7 by using the recovery partition but since Windows 7 DVDs are also delivered you can use the same procedure as above to install that. I guess that boot mode in this case should be set to legacy instead of UEFI.
Of course, you do the above at your own risk but it has worked successfully for me. You could copy the content of the Application and Driver Recovert DVD for Windows 8.1 to a USB stick as well and install that afterwards.

Similar Messages

  • How to install Windows 8.1 without optical drive

    I just got a ZBook 14 which was preinstalled with Windows 7. I want to use Windows 8.1 Pro which was alsp delivered on DVDs in the packages. However, this machine does not come with an optical drive. How can I install Windows 8.1 on this machine?
    Thanks

    Excuse me for being blunt but that is simply b***hit. Windows 8.1 comes delivered with the machine which is brand new and  any reasonably new PC is fully capable of running Windows 8.x. The question was just how I was supposed to load it onto the machine as it lacks an optical drive.  I suggest you do not give advice unless you know what you are talking about.
    For all others thatwant to the same thing.
    1. Make a copy of the Windows 8.1 DVD that comes shipped with the machine. See the following guide http://www.intowindows.com/how-to-install-windows-7vista-from-usb-drive-detailed-100-working-guide/
    2. Set Boot mode in BIOS to UEFI instead of legacy BIOS.
    3. Boot from the USB stick and install Windows 8.1, wipe all existing partitions. Please note that this will effectively remove any possibility to revert to Windows 7 by using the recovery partition but since Windows 7 DVDs are also delivered you can use the same procedure as above to install that. I guess that boot mode in this case should be set to legacy instead of UEFI.
    Of course, you do the above at your own risk but it has worked successfully for me. You could copy the content of the Application and Driver Recovert DVD for Windows 8.1 to a USB stick as well and install that afterwards.

  • How do I install windows using BootCamp without cd drive fot the new MBP?

    I need some softwares for my work (modelsim, altera, ltspices etc) but some of them only supports windows.
    New MBP doesnt seem to have a cd driver.
    How do I install windows using bootcamp without cd drivers?

    You can use a USB thumbdrive to do this, assuming you have access to a windows machine to format the usb stick.
    I installed Win7 on my MB Air (2011), which of course lacks a DVD drive altogether, using this technique.
    Basically, you download a tool called rEFIt to your macbook. ( http://sourceforge.net/projects/refit/files/rEFIt/0.14/rEFIt-0.14.dmg/download ) When this is installed, it gives you a boot selector menu when you boot the Macbook ('Do you want to boot to MacOS or to the USB drive?')
    Then you download and run an Apple tool called Boot Camp Assistant, which allows you to partition your HD for the two operating systems to share; it also pulls down all the windows drivers you need.
    Then prep the USB thumbdrive on a windows machine to be a Win7 installer disk. You'll want a drive in the 4gb+ range I think. You have to set up the thumbdrive to be bootable (lots of tools for that available), and then copy all the windows installation files over to it.
    Put the thumbdrive in the macbook and boot holding down the option key.
    Choose the rEFIt icon on boot, then choose to boot from the thumbdrive, then format your new windows partition to something Win7 can handle, and install windows.
    On my machine I followed a slightly more involved process and wiped out MacOS entirely. I would have kept it on a small partition if I'd had a bigger hard drive.
    If you need super detailed instructions, CNET has some here:
    http://howto.cnet.com/8301-11310_39-20020513-285/install-win-7-on-macbook-air-fr om-a-usb-drive/
    Tech-Recipes has some similar instructions here:
    http://www.tech-recipes.com/rx/9136/macbook-air-install-windows-7-with-boot-camp -without-an-external-dvd-drive/
    If you have any issues after trying this, ping me and I may have solved them when I went through the same process.

  • Installing Windows from an external optical drive?

    My superdrive recently died, and I replaced it with an external drive that's been able to read and burn everything I need it to without a problem, including using it to install Snow Leopard.
    I tried to use it to install Windows (Vista Home Premium, if that matters) with Boot Camp, but when it comes to starting the actual installation, the computer doesn't seem to see the drive at all. It will start up, with the chime and the grey startup screen, but that's as far as it gets. It will stay on that screen until I restart it and go back into the Mac partition by pressing option at startup.
    Is there a way to make it boot to the Windows disc in the external drive? Failing that, is there a way to use Boot Camp successfully with a non-disk source, like an external hard drive or flash drive with the Windows data on it? Any help will be greatly appreciated.

    The Hatter:
    Thanks for your reply. My purpose is temporary and to document the process of installing Windows in to a Boot Camp partition on a system that does not have an internal Optical drive.
    I did this succesfully using bits of information from three documents. I want to go through the process again, this time documenting my steps for the benefit of others and me in the future. You may or maynot know, installing Windows with Boot Camp without an INTERNAL optical drive is difficult and require a hack using Parallels, copying the VM MBR, etc.
    I should have documented it the first time but I doubted if it would work.
    So, I want a second BC partition, on my second internal drive without touching my working BC patrition on the SSD.
    Make more sense?
    Thanks,
    Kevin

  • How to install OS/reset password without optical drive?

    I was given a white G3 recently, 900 MHz 1 GB of RAM, pretty decent for as old as it is, only problem is that it doesn't have an optical drive. All of the user accounts have passwords and I can't use a disc to do a clean install or reset passwords. Any clue on how to do do anything without a disc? The closest thing I have to an external optical drive is an IDE drive with an IDE to USB adapter, but it doesn't recognize that on boot. I have an external hard drive if I can somehow mount an image on that. Any help would be appreciated. Thanks.

    How to share cd/dvd:
    http://reviews.cnet.com/8301-13727_7-10427176-263.html
    & on the computer with the cd/dvd:
    http://support.apple.com/kb/HT1777?viewlocale=en_US
    Change Password
    Mac OS X:
    Changing or resetting an account password via GUI:
    Resetting a user's password
    Resetting the original administrator account password
    http://docs.info.apple.com/article.html?artnum=106156
    You do not have a CD/DVD
    Changing password from single user mode:
    You can also change the administrator's password from single user mode or create a new administrator account.
    You need to get into single use mode for steps one and two that are listed below.
    This page will tell you how to get into single user mode.
    http://support.apple.com/kb/HT1492
    Basically, you hold down the command-s key then powering on your machine. The command key has a little apple symbol on the lower left. It is between the alt/option key and the space bar. On a PC keyboard, it will be the windows key, I think.
    1) You can change the password on an account. ( Do you know Unix. You are in a Unix single user console. ) The setup commands you need should be listed on the screen. For Mac OS 10.4.11, the commands are:
    # Type the follow two instructions to access the startup disk in read/write:
    /sbin/fsck -fy
    /sbin/mount -uw /
    # Start up some utility processes that are needed.
    sh /etc/rc
    # You will probably need to press the return key once the system stops typing.
    # To find out the users on the system type, use the list command. The l is a lower case L:
    ls /Users
    # One of these accounts will be the administrator.
    # Pick one of the users which I'll call a-user-name and type it in this command:
    passwd a-user-name
    # and enter the new user password. You need six characters.
    # You will need to enter your password twice. Your typing will not show up on the screen just
    # press enter when you complete the typing.
    # For cryptic information on these commands try:
    man ls
    man passwd
    The root account isn't enabled by default. I am not sure if changing the password on root will enable it.
    2) Get the Mac to set up an additional administrative account. You can then change the password on your old account.
    Start with your computer power off. Hold down command-s. Power on your computer.
    Type in the following:
    The first two commands will depend on your release of Mac OS X. Look at what is typed out in the console to determine the exact format.
    # Type the follow two instructions to access the startup disk in read/write. Press return after each command.
    /sbin/fsck -fy
    /sbin/mount -uw /
    cd /var/db
    pwd
    #List all files. The l is a lower case L.
    ls -a
    #The move command acts as a rename command in this format.
    mv -i .applesetupdone .applesetupdone.old
    reboot
    Once you've done that the computer reboots and it's like the first time you used the machine. Your old accounts are all safe. From there you just change all other account passwords in the account preferences!!
    Limnos adds detailed explainations:
    http://discussions.apple.com/message.jspa?messageID=8441597#8441597
    The above the idea came from a post by JoseAranda at September 9, 2006 3:48 AM
    http://www.askdavetaylor.com/howdo_i_reset_my_mac_os_x_admin_rootpassword.html
    You will need to scroll down to see this post. Search for applesetupdone
    Once you have a new administrative account, you can change the password of your old administrative account
    blue apple > System Preferences > Accounts
    • You can see that it is easy to change your administrator password. You can set a firmware password that you enter before your machine will boot.
    http://support.apple.com/kb/HT1352
    • For the best data security, you should use FileVault. Create a good logon password. Define and use a good backup plan. I do not recommend using FileVault unless you really need the security because it is much harder to recover your data should you have a hard drive problem and you do not have your data backed up.

  • Having trouble installing Windows 7 on external optical disk drive

    My internal optical drive doesnt work so i ran out and bought and LG external Optical drive. I Reinstalled mac os 10.6 and created a 45gb partition in bootcamp. When i try to install windows, at the gray screen it flashes a folder symbol and a circle with a line through it like it cant find the boot up disk in the external disk drive. The version of windows 7 im using is a burned .iso that i got from my boss so i could work on my laptop, i have tried an official windows 7 disk and that produced the same error. Im really not sure what to do other than go to the apple store and the nearest one is 100 miles away so i preferably dont want to do that. Any help would be appreciated. thanks.

    Sorry, it is not clear to me  if you are trying to install Windows on an external optical drive or what. Read the Bootcamp installation and help manuals http://www.apple.com/support/bootcamp/
    Windows needs to be installed on the internal hard drive drive.
    Also, Bootcamp questions are better posted in the Bootcamp forum where the Bootcamp gurus hang out. https://discussions.apple.com/community/windows_software/boot_camp

  • Can I install Windows without optical Driver

    Hi!
    I have a Macbook pro Early 2008 - MB134LL/A but its optical driver cannot read any disc. Now I want to install Windows via BootCamp but it cannot. Anybody know how can I install Windows without optical Driver? I tried to boot by USBflash, USB DVD Driver but it cannot boot.
    I think that does external optical drivers via firewire work?
    Thanks alot!

    Thank you for your reply, and the information.  This is what I came up with:
    I added the strings as instructed, however when I went to sign the script in terminal, I was told:
    /Applications/Utilities/Boot Camp Assistant.app: replacing existing signature
    /Applications/Utilities/Boot Camp Assistant.app: code object is not signed at all
    In subcomponent: /Applications/Utilities/Boot Camp Assistant.app/Contents/info.plist
    Also, here are screen captures of the lines that I added.  Mine are the top string entries:
    Thank you for your help, thus far!

  • Install Windows 7 without optical drive

    Can someone assist please?
    The hard drive went in my x100e however I've received a replacement under warranty.
    I now need to install windows 7 onto it using supplied recovery media (DVD).
    I have an external optical drive however the x100e doesn't recognise it at boot (BIOS is setup correctly and the optical drive works otherwise)..
    I therefore need some other way to install windows 7 onto my new drive. Any suggestions please?
    My other PC only has XP on it so I can't go the diskpart route (that only works with Vista or 7).
    I have an external USB drive - however that contains backups of all my data on it so I can't use that.
    I have a 4Gb USB pendrive however can't find any way to make that bootable with Windows 7 recovery on it.
    Help!
    Thanks,
    Jeddy

    Hello,
    A reply to your question has been posted in the Do any external DVD drives work for boot purposes? message thread.
    Regards,
    Aryeh Goretsky
    I am a volunteer and neither a Lenovo nor a Microsoft employee. • Dexter is a good dog • Dexter je dobrý pes
    S230u (3347-4HU) • X220 (4286-CTO) • W510 (4318-CTO) • W530 (2441-4R3) • X100e (3508-CTO) • X120e (0596-CTO) • T61p (6459-CTO) • T43p (2678-H7U) • T42 (2378-R4U) • T23 (2648-LU7)
      Deutsche Community   Comunidad en Español Русскоязычное Сообщество

  • Installation of Master Collection CS3 (disc version for Windows)  on a laptop without optical drive

    Installation of Master Collection CS3 (disc version for Windows) -  is there any possibility of installing my legitimately purchased MC-CS3 on a new laptop without optical drive? Perhaps through a download link or will tranfering all Adobe files from my old to my new computer do the trick as well? Or do I necessarily have to buy an external optical drive? Thank you for answering.

    No need to buy an optical drive and don't try transferring, it rarely works.
    Download the installer from Download CS3 products
    Install then enter your serial number to license it.

  • Per Adobe website, a download for Acrobat 9 for Mac is "not available." What alternative does Adobe offer to those who have bought and paid for Acrobat and now have computers without optical drive to install that previously purchased software? Buy a PC? B

    Per Adobe website, a download for Acrobat 9 for Mac is "not available." What alternative does Adobe offer to those who have bought and paid for Acrobat and now have computers without optical drive to install that previously purchased software? Buy a PC? Buy an external CD drive? Is the answer really "too bad"?

    Acrobat 9 for Mac can be downloaded from
    Download Adobe CS5 Free Trials – All Direct Links without Akamai | ProDesignTools
    Follow the Very Important Instructions on that page first BEFORE you click the download link.

  • Retail CS6 install on iMac without optical drive.

    Just bought a new iMac and of course it has no optical drive. I also purchased a retail copy of CS6, but it hasn't arrived yet. Can I download CS6 and then just use the product key that comes in the retail box to activate it...or will I have to install the software via an optical drive (which I will also have to purchase)? Thanks.

    Lotekschmotek please see http://forums.adobe.com/thread/981369 for information on how to download the software.  Also you can copy the files to a USB drive on a computer which does have an optical drive.  You can then use the USB drive to install the software on the new computer.  You may also want to consider getting an external optical drive in case you have a need to install other software or read other optical media in the future.

  • How to install Windows 7 from a USB drive!

    This is even easier than installing Windows XP from a USB drive, and will also reduce the time taken to install Windows 7, it took me about 15 minutes!
    The advice in the guide is also applicable to installing Vista.
    You need basically:
    a USB flash drive at least 4GB in size
    a Windows 7 DVD
    To sum up:
    Format your USB drive, with the NTFS filesystem
    Open Command Prompt as an administrator, and run the Bootsect.exe program off the Windows 7 CD to make the USB drive bootable
    Copy the contents of the Windows 7 DVD to the USB drive
    Restart your PC, press F11 (or whichever key it is) to access the Boot menu, and select your USB drive to boot from
    Full guide here:
    http://www.intowindows.com/how-to-install-windows-7vista-from-usb-drive-detailed-100-working-guide/

    Quote from: bnborg on 16-February-11, 10:28:04
    I have done this and it is simple.
    I cleaned and (re)formated an 8GB flash drive under Windows7 using diskpart.  I chose quick format and a fat filesystem.  It doesn't need to be ntfs.  I had diskpart mark the partition active.  I copied the DVD contents to the flash drive.  I also made a folder on it for motherboard drivers.
    After that, I booted the drive on a new machine.  Windows7 setup came up, and didn't find any hard drives, other than the USB flash drive.  I clicked the button to load drivers, and pointed it to the folder I had copied them to on the flash.  Windows installed without problems.
    Hi bnborg..Do u mind sharing with me your motherboard driver folder? I have the MSI U135DX Netbook and each time I hit the button to install Windows 7 it asks me for some mobo driver...Think i might need it to get tru with a successful install..

  • How to install Windows XP into a Flash Drive?

    I would like to install Windows XP into my flash drive. Not boot from the flash drive and install into my PC. I've searched extremely hard on the internet and found the other thing around and I tried what I could. Any suggestions? (Here's what I tried: Creating partition tables. Install using VMware. Using different formats.

    Thanks for the tips. I was able to install Windows XP and boot from the SATA drive by using these options and setting the appropriate boot device selections...
    Legacy Mode
    ATA Configuration - PATA only
    SATA Keep enabled - yes
    PATA Keep enabled - yes
    PATA channel selection - both
    Combined Mode Option - S-ATA 1st Channel
    S-ATA Ports Definition - P0 - 3rd./P1 - 4th.
    I just wasn't sure if I was really getting "SATA" performance, etc. without specific drivers.
    Thanks again.
    Bob (ll1951md)

  • Can I install windows on a RAID hard drive?

    Hi,
    I recently purchased a used macPro. This mac pro had a raid set so 4 1TB hard drives were created to make one 4 GB partition. This made the raid utility pop up frequently saying there was something wrong so I just broke the RAID set and tried to set the disk up as their on storage partitions (Just as if they were 4 normal hard drives. Now that I did this, only 3 out of the 4 hard drives are visible in disk utility. Also, I reinstalled macosx snow leopard and tried installing bootcamp but when I partition the hard drive and restart using the windows installation disk, it doesn't show that I have any available hard drives to install windows on. Is this because of my RAID disks? (Sorry I don't know anything about raid disks and didn't know this computer had it before I bought it)
    Any help would be appreciated.
    Thanks.

    As stated in the Mac Pro RAID card FAQ you can't install Windows if you have the drives controlled by that card.
    Question: Why can't I install Boot Camp on my Mac Pro or Xserve that uses a RAID?
    Answer: Boot Camp does not support the installation of Windows onto a Mac using hardware or software RAID (Redundant Array of Independent Drives). Boot Camp is not supported on the Xserve with or without the Xserve RAID Card installed.
    http://support.apple.com/kb/HT1346
    Look inside and see if there is a RAID controller from Apple, proably top slot #4. Also look in System Profile under SATA interface.
    Pull non-graphic card, seems you don't need it if you have one.
    You are not getting something: internal hard drives are one thing. RAID card is another. The RAID card just replaces the normal SATA controller that otherwise interfaces.
    Take a look at the photos and manual for the card.
    http://support.apple.com/kb/HT3514
    You can find the above from the Mac Pro Support home page I posted above.

  • IMac G5 education without optical drive, what can I do?

    I've just bought on ebay an iMac G5 1,6 Ghz (without isight) with the motherboard dead. It is very easy to open.
    What was my surprise to see that there was no optical drive...In fact, it could receive one : the slot is there, the IDE cable too, the sloat-loading hole too, but...it is impossible to introduce any CD or DVD because there is a plastic and metallic band all around that makes it impossible....
    As I didn't understand, I made a research on the web anf found out the answer....Incerdible! I didn't know that Apple had made an iMac G5 model for education, without optical drive : from outside, impossible to distinguish it, but when you try to introduce a CD or DVD in the slot, you can't!
    So the only solution is to buy an external firewire drive?
    I tried to see if it was possible to put out the metallic band to free the access for one CD, but it seems impossible! The metallic piece is riveted, or something like that....
    Does anyone has tried something?
    Thanks, I apologize if my english is not very good

    I've just bought on ebay an iMac G5 1,6 Ghz (without isight) with the motherboard dead.
    I assume you managed to fix that "motherboard dead" problem, since there would be no point in installing an optical drive in a Mac that does not work.
    If you can't get the slot open because it is intentionally closed, maybe you can get an external optical drive and stick something else into that internal space. For example, will it fit a 2.5-inch (laptop size) IDE hard drive for additional internal storage? Or you can get an IDE-to-compact-flash adapter card and give your iMac a solid state flash drive (like MacBook Air); CF cards are getting pretty cheap, even at the 16GB size, and you can get even larger ones for a higher price. Maybe you can even boot from it.
    Just some ideas...

Maybe you are looking for