Install windows from different computer

Hello guys,
firt, I would like to apology for my English.
I tried to install Windows on my macbook pro 13 late 2011, but I don't have any SuperDrive in. I replaced my SuperDrive to HDD and on the place of HDD I put SSD.
And my point is, that when I tried to install windows with bootcamp I always ended by black screen and text on it " no bootable device, please put device.......". When I looked for solutions, I found, that my MBP doesn't support boot from USB, but I did clean install OS X and it worked fine.
So what I want to know is, IT'S POSSIBLE TO INSTALL WINDOWS TO HDD WITH DIFFERENT PC AND THEN PAST IT BACK TO MBP AND BOOT WINDOWS? Or it has to be strict install with bootcamp to boot ?
Thank you for all responds !! :-)

You can not install Windows in another computer then "PAST" it onto another computer. You must intall Windows onto the computer that will be booting Windows.

Similar Messages

Install OSX from different computer

Here's the situation. Hard drive died, and data was unretrievable. Hard drive was replaced and 10.4.11 was installed. Before the failure I had 10.5.5 that I had bought as a family pack, which I also have installed on a different computer. Unfortunately I can't find the disc. Is there a way to make a copy of the OS or a way to install it from the other computer via firewaire, or am I going to have to buy a new disc?

When you say not work properly, do you mean unusable
Yes, I mean unusable; the system may not even boot, or it may boot but be erratic in operation
if it doesn't work, is it possible to undo?
Only with a reinstall of the OS.
Between PowerPC systems, you can try cloning the drive on the "good" system if you absolutely can't get your hands on a retail Mac OS X installer. Boot the system with the new drive to Firewire target disk mode and use a cloning utility such as Carbon Copy Cloner to clone the OS from the "good" system to the other one. If you're lucky, it might work without problems. But it's by no means guaranteed; it could lead to erratic results and/or some functions, system prefs, etc may not work or may be missing. Note as well that you'll need to remove from the cloned system any applications that were installed on the "good" system for which you don't have a license to run on two machines.
It will really be better if you can get a new retail installation disk for Mac OS X. That's going to be the most reliable method of installing on the new drive.
Good luck.

Re: How to install Windows from recovery media on a new hard drive?

Immediately after a Windows update, my computer would not restart. It said disk error.
I could not start it from the recovery media and F8 would not work. I bought and installed a new hard drive. Now when I put in the recovery media to install Windows on the new hard drive, it gives an error message.
What can this be? Should I be able to install Windows from the recovery media?
It is Windows 7 and the laptop is Satellite A500, 64 bit.

Hello
Generally speaking you can install recovery image on every compatible HDD so thee should not be any problem about it.
Please tell us what happen when you start recovery installation. Which error message is shown?
Is new HDD recognized in BIOS. Before you start recovery installation set BIOS to default settings.

Windows 8 - Windows could not cmplete the installation. To install Windows on this computer, restart the installation

Having SCCM 2012 SP1 CU3 I attempted to do a pretty simple task.
Create a capture media for Windows 8 64 Bit and capture the OS.
The system in question is a Dell Latitude 6430u and OEM Windows 8.
The system ran as expected, the capture went as expected, but when I deploy the image (Back to the same laptop mind you)
The following occurs:
Windows could not complete the installation. To install Windows on this computer, restart the installation.
Things that I've tried:
Set the SATA to various modes as it was on RAID on as speculated in some posts
Saw a posting that suggests pressing SHIFT F-10 to get in to some prompt and run oobe; doesn't work here, I think.
Added Dell Driver Packs for the system
As for log files, I'll check C:\Windows\Panther and see what's there.
Any ideas on how to correct this? Is there a way to go in to the image itself to do so?

Sorry, I'm not using CM2007, but CM 2012 SP1, CU3.
I went through the smsts log and found several instances where drivers were missing so I'm guessing that's why it pitched a wobbly about not being a suitable system for the Windows setup.
Failed to find a suitable device driver for device 'ACPI Lid'. OSDDriverClient 11/15/2013 5:54:57 PM 1168 (0x0490)
Failed to find a suitable device driver for device 'USB xHCI Compliant Host Controller'. OSDDriverClient 11/15/2013 5:55:00 PM 1168 (0x0490)
Failed to find a suitable device driver for device 'SDA Standard Compliant SD Host Controller'. OSDDriverClient 11/15/2013 5:55:00 PM 1168 (0x0490)
Failed to find a suitable device driver for device 'RamDisk'. OSDDriverClient 11/15/2013 5:55:00 PM 1168 (0x0490)
Failed to find a suitable device driver for device 'PCI Simple Communications Controller'. OSDDriverClient 11/15/2013 5:55:01 PM 1168 (0x0490)
Failed to find a suitable device driver for device 'ACPI\DELLABCE\2&DABA3FF&0'. OSDDriverClient 11/15/2013 5:55:02 PM 1168 (0x0490)
Failed to find a suitable device driver for device 'ACPI x64-based PC'. OSDDriverClient 11/15/2013 5:55:02 PM 1168 (0x0490)
Failed to find a suitable device driver for device 'Generic Monitor'. OSDDriverClient 11/15/2013 5:55:02 PM 1168 (0x0490)
Failed to find a suitable device driver for device 'PCI Express Root Complex'. OSDDriverClient 11/15/2013 5:55:06 PM 1168 (0x0490)
Failed to find a suitable device driver for device 'Intel(R) 7 Series/C216 Chipset Family PCI Express Root Port 1 - 1E10'. OSDDriverClient 11/15/2013 5:55:06 PM 1168 (0x0490)
Failed to find a suitable device driver for device 'Intel Processor'. OSDDriverClient 11/15/2013 5:55:06 PM 1168 (0x0490)
Failed to find a suitable device driver for device 'Intel Processor'. OSDDriverClient 11/15/2013 5:55:06 PM 1168 (0x0490)
Failed to find a suitable device driver for device 'Intel Processor'. OSDDriverClient 11/15/2013 5:55:06 PM 1168 (0x0490)
Failed to find a suitable device driver for device 'Intel Processor'. OSDDriverClient 11/15/2013 5:55:06 PM 1168 (0x0490)
Failed to find a suitable device driver for device 'USB Root Hub (xHCI)'. OSDDriverClient 11/15/2013 5:55:06 PM 1168 (0x0490)
Failed to find a suitable device driver for device 'ACPI Power Button'. OSDDriverClient 11/15/2013 5:55:06 PM 1168 (0x0490)
Failed to find a suitable device driver for device 'Microsoft ACPI-Compliant System'. OSDDriverClient 11/15/2013 5:55:06 PM 1168 (0x0490)
Failed to find a suitable device driver for device 'Microsoft Basic Render Driver'. OSDDriverClient 11/15/2013 5:55:06 PM 1168 (0x0490)
Failed to find a suitable device driver for device 'Trusted Platform Module 1.2'. OSDDriverClient 11/15/2013 5:55:06 PM 1168 (0x0490)
Failed to find a suitable device driver for device 'Intel(R) 7 Series/C216 Chipset Family SMBus Host Controller - 1E22'. OSDDriverClient 11/15/2013 5:55:06 PM 1168 (0x0490)
Failed to find a suitable device driver for device 'ACPI Fixed Feature Button'. OSDDriverClient 11/15/2013 5:55:06 PM 1168 (0x0490)
Failed to find a suitable device driver for device 'Generic volume'. OSDDriverClient 11/15/2013 5:55:06 PM 1168 (0x0490)
Failed to find a suitable device driver for device 'Motherboard resources'. OSDDriverClient 11/15/2013 5:55:06 PM 1168 (0x0490)
Failed to find a suitable device driver for device '3rd Gen Core processor DRAM Controller - 0154'. OSDDriverClient 11/15/2013 5:55:06 PM 1168 (0x0490)
Failed to find a suitable device driver for device 'Generic volume'. OSDDriverClient 11/15/2013 5:55:06 PM 1168 (0x0490)
Failed to find a suitable device driver for device 'Generic USB Hub'. OSDDriverClient 11/15/2013 5:55:06 PM 1168 (0x0490)
Failed to find a suitable device driver for device 'Intel(R) QM77 Express Chipset LPC Controller - 1E55'. OSDDriverClient 11/15/2013 5:55:06 PM 1168 (0x0490)
Failed to find a suitable device driver for device 'System CMOS/real time clock'. OSDDriverClient 11/15/2013 5:55:06 PM 1168 (0x0490)
Failed to find a suitable device driver for device 'Generic USB Hub'. OSDDriverClient 11/15/2013 5:55:25 PM 1168 (0x0490)
Failed to find a suitable device driver for device 'Programmable interrupt controller'. OSDDriverClient 11/15/2013 5:55:25 PM 1168 (0x0490)
Failed to find a suitable device driver for device 'Standard PS/2 Keyboard'. OSDDriverClient 11/15/2013 5:55:25 PM 1168 (0x0490)
Failed to find a suitable device driver for device 'Intel(R) 7 Series/C216 Chipset Family PCI Express Root Port 2 - 1E12'. OSDDriverClient 11/15/2013 5:55:25 PM 1168 (0x0490)
Failed to find a suitable device driver for device 'Generic volume'. OSDDriverClient 11/15/2013 5:55:25 PM 1168 (0x0490)
Failed to find a suitable device driver for device 'Motherboard resources'. OSDDriverClient 11/15/2013 5:55:25 PM 1168 (0x0490)
Failed to find a suitable device driver for device 'Direct memory access controller'. OSDDriverClient 11/15/2013 5:55:25 PM 1168 (0x0490)
Failed to find a suitable device driver for device 'Microsoft System Management BIOS Driver'. OSDDriverClient 11/15/2013 5:55:25 PM 1168 (0x0490)
Failed to find a suitable device driver for device 'Disk drive'. OSDDriverClient 11/15/2013 5:55:25 PM 1168 (0x0490)
Failed to find a suitable device driver for device 'Standard Enhanced PCI to USB Host Controller'. OSDDriverClient 11/15/2013 5:55:25 PM 1168 (0x0490)
Failed to find a suitable device driver for device 'USB Mass Storage Device'. OSDDriverClient 11/15/2013 5:55:25 PM 1168 (0x0490)
Failed to find a suitable device driver for device 'Integrated Webcam'. OSDDriverClient 11/15/2013 5:55:25 PM 1168 (0x0490)
Which doesn't make sense since the image that I am trying to put on the system is the one I took it from. Before putting the image out I went to Dell's web site and got the Windows 8 drivers for the system and distributed them as I usually do.
I got the drivers from here -
http://en.community.dell.com/techcenter/enterprise-client/w/wiki/4372.latitude-6430u-windows-8-driver-cab.aspx
What I don't get is that I can take the Windows 8 install.wim and do an OSD task with it and there is no issue with drivers.
One other thing here is the log from the windows\panther folder:
2013-11-15 17:56:46, Error                 SYSPRP SPPNP: Failed to enumerate PnP DRP files. Err = 0x5[gle=0x000003f0]
2013-11-15 17:57:09, Error      [0x0f0082] SYSPRP ActionPlatform::LaunchModule: Failure occurred while executing 'CryptoSysPrep_Specialize' from C:\Windows\system32\capisp.dll; dwRet = 0x5
2013-11-15 17:57:09, Error                 SYSPRP ActionPlatform::ExecuteAction: Error in executing action; dwRet = 0x5
2013-11-15 17:57:09, Error                 SYSPRP ActionPlatform::ExecuteActionList: Error in execute actions; dwRet = 0x5
2013-11-15 17:57:09, Error                 SYSPRP SysprepSession::Execute: Error in executing actions from C:\Windows\System32\Sysprep\ActionFiles\Specialize.xml; dwRet = 0x5
2013-11-15 17:57:09, Error                 SYSPRP RunPlatformActions:Failed while executing SysprepSession actions; dwRet = 0x5
2013-11-15 17:57:09, Error      [0x060435] IBS    Callback_Specialize: An error occurred while either deciding if we need to specialize or while specializing; dwRet = 0x5

How do I install windows from USB on Macbook pro 3,1

How do I install windows from USB on Macbook pro 3,1 ?
My Superdrive is far from super anymore, So I managed to make an extern drive with both Snow Leopard Partition, Lion Partition (Since I thought Boot Camp 4,1 would bypass my problem), and Time Machine partition, Since I got 1. USB drive that works.
- My general issue is that Boot camp Refuse to see the USB drive - (Many "how to"´s though show how they install windows perfectly through the USB port, but they use airbooks!, and somehow the Macbook will not ?)
I fix that issue with >> rEFIt <<, that suddenly makes it possible for the Mac to see the USB drive, and partitions.
Which was very strange since I could use an extern HD with the whole installation to start up wipe the whole disk, and then use my extern drive with partitions to install Snow Leopard and get everything as before with timemachine. Very smart with timemachine, but very lucky that I have a extern drive that runs the whole system and that I made the partitionsdrive before. DVD-drives are the past!
Point: So the original system could see the Snow Leopard installation USB disk, but boot camp cannot find the USB drive ?????????
After rEFIt I booted and then I got this error:
Starting bootmgr.efi
Error: Unsupported while loading bootmgr.efi
I read it could be a problem with the Windows software, so I purchased an extern DVD drive, Used Disk Utility to make an image (.DMG), then used another program to convert the .dmg to .ISO.
Then downloaded a trialversion of vmWare fusion, and installed windows from the iso. Everything worked brilliant, except and that is why I want to use boot camp, Running windows in another program while running the mac system is a little hacky and slow.
Point: Nothing is wrong with the windows software, and windows runs fine.
I then downloaded the Windows DVD / USB Tool, reformatted a USB drive as Master Boot Partition, MS-Dos Fat partition, then after lots of struggling got Vmware, windows to recognise the USB drive. And installed the windows software on the USB drive, as all the walkthroughs recommend.
Then I tried for "fun"! to just install windows form the extern USB drive, and with rEFIt it will see the drive and start to do something, but then when it starts to boot, the screen just turns into black and nothing happens, and you can see the drive does NOTHING. (I think it is because I only have 1 USB drive and the Extern DVD drive does not get enough power, but again the mac refuse to see the USB drive unless it is a Snow Leopard installation USB-drive!
Well trying to install Windows Ultimate 64 Bit, which worked great in vmware, because that program installed from the .ISO file that I had on the desktop, but trying with Boot Camp did not get anywhere, what kind of **** program is this boot camp anyway!?, but then I try the new USB disk with windows made from windows, thorugh rEFIt, it sees the disk and then starts and then I get this ERROR:
rEFIt - Booting Legacy OS
Starting legacy loader
Using load option ´USB´
Error: Not found returned from legacy loader
Error: Not found from LocateDevicePath
(x 9 times)
Error: Load Error while (re)opening our installation volume
The firmware refused to boot from the selected volume. Note that external hard drives are not well-supported by Apple´s firmware for legacy OS booting
(Hey Apple please send out a updated firmware that fix this issue?!)
So how do I do it ? - or is the only option to fix the partition running the system from the extern disk. Format the whole drive in 2 from the "bottom" and install windows and then afterwards install Mac on the other partition ? Or just run windows on the mac and forget about mac software ? What a stupid solution...

There are strings in the pliist file to add other Macs so that you can use some USB-DVD drives.
This is 5 page thread, so a little more 'meat' to it:
https://discussions.apple.com/thread/3410900?start=60&tstart=0
And on PC booting Windows from a USB DVD to do the install is usually a piece of cake, sometimes you just need to specify that USB in the BIOS boot order and sometimes select via F12 (or another Fkey) and that is it.
What you have here seems to be everything and everyone is excluded unless there is a mac-model device ID string that specifies yes. An unnecessary hurdle.

Can I install ios5 from a computer other than my primary computer?

I have downloaded the Lion update in the office and would like to install ios5 on my iphone and ipad before going home, which is where my "primary" computer is, i.e., the one I use to sync. Can I install ios5 from any computer or does it have to be the one I have always used for syncing?

You can but if your office computer does not have your backups and iTunes Library from your home computer then the device contents will be wiped. I'd wait until you got home.

Install windows from iso on older mac

Hi everybody
I have a mid 2010 MacBook Pro (15"), running Yosemite, and I want to install Windows on it using bootcamp.
Since my optical drive doesn't work properly, I hope for installing windows from an iso file.
The problem is the system's bootcamp assistant have not such option.
Is there a workaround for it?

You can modify the Bootcamp info.plist using Enable Bootcamp to install from usb for OSX 10.9**WORKS** , but for Macs with built-in Optical drives, BC Assistant sets the CSM-BIOS layer to boot from the Optical drive. There is no way for a user to change it. Some 2011/2012 Macs allow a USB/ISO combination, but older Macs will run into issues with Keyboard and Mouse drivers which may not work.

I upgraded my i0s but I can't sign in facetimes and messages on my iPod touch and my iPod nolonger syncs to install apps from my computer how do I have it work normally ?

I upgraded my i0s but I can't sign in facetimes and messages on my iPod touch and my iPod nolonger syncs to install apps from my computer how do I have it work normally ?

FaceTime, Game Center, Messages: Troubleshooting sign in issues
Regarding syncing:
What exactly happens when you try to sync?
Does iTunes see the iPod?
Was the iPod previous synced to another iTunes library/computer?
Have you successfully synced from this iTunes library/computer before?
How did you update the iOS? Did you do it via wifi? Via iTunes on the computer?
Do the songs play in iTunes?
Does any media now sync to the iPod?
Do you have the right boxes checked to sync?
iTunes: Syncing media content to iOS devices and iPod
Try syncing using the manual method
Managing content manually on iPhone, iPad, and iPod
Backup and restore from backup. See:
iOS: Back up and restore your iOS device with iCloud or iTunes

HT1846 gtp error while installing windows from usb! how to solve it.

gtp error while installing windows from usb! how to solve it.

Hello mmarti,
Thanks for using Apple Support Communities.
Please ensure you are following the Boot Camp installation guide, as you should be selecting the partition named "BOOTCAMP" when you are at the Windows installer screen. See page 6 of the following PDF:
http://manuals.info.apple.com/MANUALS/1000/MA1636/en_US/boot_camp_install-setup_ 10.8.pdf
Take care,
Alex H.

Install Windows from external dvd drive?

ok.there is my problem.
I have a Mac Pro here.Last week the dvd driver stopped work and I do not have time to fix it now and I need urgently install the windows xp because need to use a specific app for windows.
Is it possible to install windows xp on bootcamp using a external dvd drive (usb).
thank you.

I have the exact same problem - my internal SuperDrive died and I'll be damned if I'm going to pay over $500 to get a new one. It appears to be utterly impossible to install Windows from an external DVD drive. At least it seems to be that way for me and my machine.
I've tried my drive connected with USB and with Firewire. I've tried rEFIt. I've tried booting with the Option/Alt key. My Mac seems unable (or unwilling) to do this.
I've found many many people with the same problem and only a very small handful that seem to eventually get it to work.
I've even tried to use the 30 day trial of VMFusion (which is not a long term solution because it doesn't use/mimic sufficient video drivers to support the games I want to play) to install Windows to the partition and I can't get that to work either. The Windows installer seems to refuse to install an older version of the system when the boot version has already been updated to a new one.
Does anyone out there have a way to reliably install Windows on a BootCamp partition?
Cheers,
Fusilier

HT3986 In using bootcamp to partition and install Windows on my computer, the partition step stops and sends me a message that "files cannot be moved" so partitioning is incomplete. I am stuck. Please help.

In using bootcamp to partition and install Windows on my computer, I keep hitting a snag. Message says that partitioning can not be completed because files can not be moved. I have tried several things but nothing seems to be helping to move the process along. What should I do?

Welcome to the Apple Support Communities
In most of the cases, that message appears when there's a problem with the filesystem, so you have to repair the disk. This doesn't mean that the hard drive is damaged.
First of all, open  > About this Mac, and check Version. If it's 10.5 or 10.6, insert the Mac OS X DVD of the version you are using and press C key while your Mac is starting. If it's 10.7 or 10.8, press Command and R keys while your Mac is starting. After doing this:
1. Go to Utilities menu > Disk Utility (if you have 10.5 or 10.6) or open Disk Utility (10.7 and 10.8).
2. Choose Macintosh HD in the sidebar and repair the disk.
3. Restart, open Boot Camp Assistant and follow the steps to install Windows on the Mac

Installing windows from USB MBP3,1

Hey Everyone,
I have a MacBook Pro 3,1 running 10.8. Optical drive broke so I decided to put a second HDD in its place. I can see it fine but when I go into Boot Camp Assistant the second HDD is not there for me to select where to install Windows.
Also I've tried so many ways to install Windows on an USB so I can install if from there on my MBP but for some reason i can't boot to it or boot Camp Assitant can't recognize it.
I've tried Refit version and setting my MBP as a Target so I can install windows from my MacPro at work, but that didn't work either!! I'm going crazy!! Please some one help...
I'm thinking of taking the second HDD out and putting into my MacPro at work and installing windows that way.
Thanks
Steve

Hi Chaaker,
I can't comment on installing Windows 7 to the Boot Camp partition (or on a USB stick) but I can comment on the last part of your question.
EFI-based Mac computers can definitely boot to a USB volume, assuming the volume it's booting to is configured as a start up volume. I was at a Genius Bar several months ago and saw two MacBook Air computers getting support and both of them were running off USB-based external HDs.
The only potential point of failure I see in the equation is the EFI startup sequence being unable to read the USB drive that has Windows 7 on it.

What do I do if my Mac doesn't support installing Windows from an external USB drive or DVD?

I have connected now: an external hardrive with windows support software, and a disc with Windows 7 ISO files on it. I have tried to run bootcamp assistant, but when I am given the first dialogue box titled "select tasks", I am not given the first option which should be "create a windows 7 or later install disk". If I skip to the next screen anyway after checking the other options, bootcamp assistant tells me "the installer disc could not be found Insert your Windows installer disc and wait a few seconds for the disc to be recognized", even though my DVD with the windows ISO file is in the computer. How do I fix this? Do I need to get an actual copy of the Windows software DVD instead of a DVD with the ISO image on it? Because it seems like my system does not support the ISO DVD. Eeep!

Thanks Phil0124. I was able to mount the ISO onto the DVD from my disk utility but now I face another problem. Bootcamp recognized the disc and started to install Windows, but stopped and gave me the following error message: "your disc could not be partitioned An error occurred while partitioning the disk".

Installing Windows from an external optical drive?

My superdrive recently died, and I replaced it with an external drive that's been able to read and burn everything I need it to without a problem, including using it to install Snow Leopard.
I tried to use it to install Windows (Vista Home Premium, if that matters) with Boot Camp, but when it comes to starting the actual installation, the computer doesn't seem to see the drive at all. It will start up, with the chime and the grey startup screen, but that's as far as it gets. It will stay on that screen until I restart it and go back into the Mac partition by pressing option at startup.
Is there a way to make it boot to the Windows disc in the external drive? Failing that, is there a way to use Boot Camp successfully with a non-disk source, like an external hard drive or flash drive with the Windows data on it? Any help will be greatly appreciated.

The Hatter:
Thanks for your reply. My purpose is temporary and to document the process of installing Windows in to a Boot Camp partition on a system that does not have an internal Optical drive.
I did this succesfully using bits of information from three documents. I want to go through the process again, this time documenting my steps for the benefit of others and me in the future. You may or maynot know, installing Windows with Boot Camp without an INTERNAL optical drive is difficult and require a hack using Parallels, copying the VM MBR, etc.
I should have documented it the first time but I doubted if it would work.
So, I want a second BC partition, on my second internal drive without touching my working BC patrition on the SSD.
Make more sense?
Thanks,
Kevin

Installing windows on new computer :(

Hey!
You guys seems to know what you're doing so I've decided to let you help me
I got a huge problem.. I recently bought hardware to upgrade my old computer (see signature for specifications).. in other words, I replaced everything (incl. PSU) except the tower and cd-rom.
My computer boots fine and load the Windows XP-cd all the way til it tells me to "Press ENTER to install Windows XP"
When I do that I've gotten 2 different bluescreen-errormessages:
#1:
IRQ_LESS_OR_NOT_EQUAL
- what i've tried to solve this -
* I've removed everything I had in the pci-slots and tried deactivating the integrated ones in bios... dont really know what more to do when the harddrive is empty..
#2:
"It seems like disk.sys is creating an error"
PAGE_FAULT_IN_NONPAGED_AREA
- what i've tried to solve this -
* Nothing.. cus I have no idea what it means :(
I would really appreciate it if anyone could help me!

Quote
Originally posted by bluedragon
When I was installing windows I kept getting a bluescreen before the install would even really start going. I had to disable the on-board NIC, USB ports, and Sound to get the system to boot. Finally got XP installed and the system would hang again anytime they were enabled. I updated the BIOS to v1.5, and everything worked fine after that.
How do I update the BIOS ?

Install windows from different computer

Similar Messages

Maybe you are looking for