Install Windows on a smart card on a MacBook Retina?

Greetings:
Can Windows 7/8 be installed on a 16gb media card for a MacBook Retina? Also, is it feasible to install Fusion on the MacBook and the VM instance on the memory card. I am trying to contontrol the amount of space on the 256g flash media of the MacBook. I would prefer a Fusion install but could live with bootcamp if no other option was availalbe.
Thanks
Mark

You have a problem: Windows can't be installed in external drives (Microsoft's restrictions), so you have to install it on the hard disk of your MacBook Pro using Boot Camp, or just purchase VMware Fusion, Parallels or VirtualBox, and install Windows in a virtual machine.
See what's better for your uses > https://discussions.apple.com/docs/DOC-3321

Similar Messages

Can I install Windows 7 System Builder Addition on a MacBook Pro?

Can I install Windows 7 System Builder Addition on a MacBook Pro?

rmsmac,
do you mean Addition, or Edition? Is it a 32-bit version of Windows 7, or a 64-bit version of Windows 7?
Why don’t you give it a try, and report back on whether you’re able to or not?

Installing Windows XP via Fusion on MBPro w/h retina

I was about to install Windows XP on VMWare Fusion on my MacBook Pro when it asked me to format the hard driver partition in NTFS. Is it ok to do so? Wouldn't that mess up the current OSx file system on the hard drive (or solid state drive in that matter) ?

Fusion doesn't create a separate partition. It creates a pseudo-drive in the form of a disc image. There's no problem formatting a disc image NTFS because that has no effect on the hard drive itself.
Nor would it matter if you were using an already established Boot Camp partition.

Installing Windows XP Pro or Vista on a MacBook

Yes, i've backed up all my information onto a image disk. Now, i want to install Windows XP Pro or Vista onto my MacBook. What is the easiest way of doing this without slowing down my performance of my macbook???
I would like step by step instructions and hopefully they are simple, lol.
Thanks,
Jeremy

The easiest way to do it is to download and install Boot Camp. As long as you follow Apple's instructions it should go just fine.
I have installed both XP and Vista - at different times - on my BlackBook and they both work fine.

Installing Windows 7 = incompatible video card?

Hey there,
I recently purchased a new Macbook Pro, and installed Snow Leopard.
I have an evaluation copy of Windows 7 which I tried installing using Boot Camp last week.
Everything seemed to go fine until I realized I couldn't play any of my Steam games because the screen resolution was terrible and noticed I was missing drivers..
I followed a step-by-step guide to installing Windows 7 using Boot Camp, so I managed to get the sound working fine. However I cannot adjust the resolution properly and obviously can't play any games...which is basically the only reason I wanted to use Boot Camp.
Any help is appreciated, thanks!

NO.... he has a workstation, and not MBP, nor are "drivers already loaded."
How I would proceed -
Install Windows on its own drive.
Pull all the other drives.
Boot from Windows 7 Pro DVD
Forget Boot Camp Assistant, it doesn't do anything - unless you really want to install Windows on the SAME drive as Mac OS - not ideal and not what most of Mac Pro owners do.
Just insert your OS X DVD once Windows is up to date - helps to buy the SP1 OEM version $129.
Run Apple SETUP.exe (Boot Camp 3.0.x drivers) and update with ASU or manually to 3.2.
No you don't need to go back and use that ATI. And you dont' want to be in the situation of changing from ATI to Nvidia and all the hassle that adds. you are fine.
The Mac Pro is as close as anything to a standard Wintel workstation.
Add MS Security Essentials or KIS or whatever you favor. KIS2011 or NIS2011 are good, MSSE 2.0 is free and based on their enterprise product.
AV-Test.org Test Security-Software

Installing Windows 7 Upgrade Edition on a new Macbook Pro

Hi all,
I am a recent convert to Apple after becoming more and more disillusioned with Windows for the past 10 or so years. I have ordered a shiny new 15" 2011 MBP and can't wait for it to arrive!
My issue is that I am going to need to install Windows for occassional use with certain software as well as occassional gaming. I have a legitimate copy of Windows XP (as well as ME and 98) which I am perfectly happy with - However I understand that the new Macbooks will no longer support WinXP via Bootcamp?
I am a student and have recently purchased a copy of the Windows 7 upgrade edition to rectify this, but I have now read that you cannot perform a "clean" install from the upgrade edition?
I'm afraid I am finding this all very confusing. I do own a legitimate copy of WinXP, and am eligable for the Win7 upgrade, so any help getting this installed on my new Macbook? I would hate to have to keep my ancient desktop around just for Windows, as this would defeat the object of my new purchase.
I have found the following guide;
http://www.winsupersite.com/article/windows-7/clean-install-windows-7-with-upgra de-media.aspx
Does anyone know if this will work in my case or has anyone tried on a brand new MBP?
Thanks in advace for any advice and guidance you can offer.

I have read in an issue of Mac Format about installing Windows in VirtualBox? I'm not really sure how this differs from using BootCamp and what the advantages/disadvantages are...
Virtualization through Virtualbox (or Parallels or Fusion,) allows you to create a "virtual machine." In this virtual machine, you install Windows or Linux or whatever OS, just like you would a physical machine. But the "machine" is just some software and you view the machine as window within OSX. Think of it like a word processing program like Microsoft Word. You run Word to create documents. You can have multiple documents, but the documents can only be "run" within Word. And you can have multiple documents open at the same time and you can switch back and forth between documents without having to reboot OSX. So it is with virtualization. You can create multiple virtual machines (if you have enough hard drive space, just like Word.) You can run multiple virtual machines (if you have enough RAM, just like Word.) It's just that the "documents" are now operating systems rather than word processing or spreadsheets. The big advantage is that you don't have to reboot out of OSX in order to use Windows.
...i'm looking to mostly use windows for gaming, would this method be suitable for that as i see I would not have to restart the system.
And then we come to the disadvantage. A virtual machine has "virtual hardware". The "guest" operating system doesn't actually "see" the physical hardware directly. Instead a virtual motherboard, virtual hard drive, virtual keyboard, etc, are "presented" to the guest OS. The virtualization software must "interpret" the requests from the guest OS into things the physical hardware must do. As with any interpretation, there is a delay. Think of it like if you spoke only French and you talk through an interpreter to someone who only spoke Swahili. It works, but is slower than if you were able to speak Swahili. For most things, this is fine. The weak link is the virtual video card. A simple game like solitaire doesn't need much graphics power so the "slowness" is not an issue. But a FPS game like Call Of Duty or Crysis, where graphics performance is critical, a virtual machine often chokes. So the use of virtualization in gaming really depends on the game.
BTW, there is another technology called emulation that is similar to virtualization, but in general is slower than virtualization. Emulation is used when the CPU required for the guest OS is different than what the physical host has. For example, if you wanted to run Windows on a PowerPC Mac. This is why the Mac changing to Intel CPUs was so exciting because it allowed the use of the faster virtualization technology for Macs to run Windows.
So the decision to use Boot Camp or virtualization depends on your needs. Me personally, I work with virtual machines daily due to my work with testing servers and such. With virtualization I am able to run several virtual machines simultaneously and so can simulate a whole network all within my Macbook. My work doesn't involve much graphics tasks with games, Photoshop, video, etc, so virtualization is fine. If your game is a FPS, then you probably wouldn't find virtualization acceptable. But "simple" games it may be fine. Virtualbox is free, but Parallels and Fusion sometimes do better with certain games. Parallels and Fusion have trial versions so you may want to try them as well. If you do, when you create the virtual machines, do NOT activate Windows until you're sure you're going to purchase. The various products do NOT use the same file format so converting a virtual machine to another format is tricky. If you do activate Windows, then decide to use a different product but are unable to convert the virtual machine, it's not a big deal to call Microsoft for the reactivation, but it is inconvenient, so better to avoid activation until you're sure.

Install Windows 8.1 BootCamp drivers on old MacBook (Late 2008)

Here is how I installed BootCamp drivers for 8.1 on my old MakBook (Late 2008):
Download Boot Camp 4.0.4033 (Drivers for old MacBook is in this version)
Install Windows 7, then WIndows 8.1 (There are other threads on how to do that).
After Windows 8.1 installed, try to install Boot Camp 4.0.4033 again !!! (Reason: Only this version has the drivers for old Mac like mine)
Download and install InstEd on Windows 8: http://www.instedit.com/download.html. You need this to modify the BootCamp 4 MSI installer to allow you to run it
Run InstEd, click File > Open, browse to your <BootCamp_4.0.4033>\BootCamp\Drivers\Apple folder and choose BootCamp64.msi.
Click LaunchCondition on the left-hand list.
Select all the rows then right click Delete Rows. (Take a look, you will find thses are the messages you saw when you could not run the installer)
Save the file with a new name (I used bootcamp4.msi) and quit InstEd.
Now, you can install the BootCamp 4 drivers on your Mac, by click the Setup.exe (Yes, this will also instll TrackPad driver for old Mac)
The BootCamp 4 service application itself is not compatible with Windows 8.1, (not the drivers). So just download BootCamp 5.1.5621, and install it (Tip: InstEd).
After restart, click the BootCamp icon in the system tray. Set up TrackPad, Keyboad, etc. (How is this possible? Because the drivers were installed by BootCamp 4.0.4033.)
Unstall InstEd, if you want.
Enjoy!

And I used this method:
1. Install Windows 8.1
2. Download BootCamp 5 and unzip to folder BootCamp5 of a USB drive
3. Start CMD as Administrator
4. Install BootCamp 5 by entering the following commands
D: (Assuming the USB drive is assigned to letter D
CD BootCamp5\BootCamp\Drivers\Apple
BootCamp.msi
No need for InstEd might be considered by some as even more elegant as bezodziu's method

How to install Windows 8 or 7 on Mid 09 Macbook Pro (10.9 Mavericks)?

hello fellows
     i have a macbookpro mid 2009 , i had installed windows 7 on 10.8 and using well .
    Two days earlier, i upgraded the ssd and installed the 10.9 on my laptop. but i cross into trouble when install the windows.
     i have follow the instructions that windows 8 installation on 10.9 by using a usb, and i have a bootcamp partition. but the screen stay white after system reboot.
     did anyone have installed windows 7 or 8 on mid 09 with 10.9 Mavericks successful ?

Welcome to Apple Support Communities
Your MacBook Pro is not designed to install Windows through an USB drive, so do not use this option. You are getting a white screen because your MacBook cannot start up from the USB drive with Windows.
Instead, use a DVD with Windows, so you will be able to install Windows. Follow these steps > http://manuals.info.apple.com/MANUALS/1000/MA1636/en_US/boot_camp_install-setup_ 10.8.pdf
Mid 2009 MacBooks Pro do not support Windows 8 officially

HT3986 i can not install windows 7 with boot camp on my macbook pro 17-inch eairly 2011

I have been trying to install windows 7 on my MacBook pro 17inch 2011, once i get to the step "burn a copy to a cd or DVD" the system runs and burns the information to the DVD but when the next step appears after I create the partition the program dose not recognize the DVD I created. when i save the copy to an external hard drive that is MS-DOS (FAT) formatted the same thing happens, the system just does not recognize the saved file. I have updated my computer and tired to check if I have any updates for the boot camp were available my current version is 4.0.1 (429). if there is anyone out there who can help, please do.

1st, you read the full guide, and you understand that you need to supply your own copy of Windows 7 (Home Premium preferably 64-bit).

HT5639 I am attempting to install windows 7 ultimate on a mid2012 production macbook pro using Bootcamp 5 in Mountain Lion. Whenever I set the partition size and tell it to continue, the program quits unexpectedly. I have done this about 5 times now. Sugg

The lead-in above pretty much states the problem. I am attempting to install Windows 7 from a disk, but that is not the issue. Boot Camp 5 just quits and reopens. I then repeat. Help.

I am about to run specialized GIS software that may or may not need the full machine resources. I am an attorney who uses QuickBooks for my accounting. The Mac version does not do as much as the Windows version. This is from both Apple and Quick Books professionals. I am using Parallels Desktop version 8 at this time. It does not support QuickBooks Windows version per Parallels. Any other questions? I am a highly competent PC user who is new to Macs. I am entitled to my own configuration choices. That said, I know when I need help which is now.
As to the free space issue I have 665.18 GB free space out of 749.3 GB on the drive. I am not trying to run the 32 bit version. I know that it requires the 64 bit version. Besides, it does not get that far in the process. As I said Boot Camp asssitant terminates unexpectedly as soon as you hit the continue button after setting the partition size. Therefore I conclude that it does not have a chance to see which version of Windows that I am using. I am using Windows 7 Ultimate 64 bit version in the virtual engine (to use Parallels speak), but again Boot Camp would not see that since it is not running. It can't run at the momenet because Apple just installed a new hard drive and I have just restored the data from TIme Machine and Parallels needs reactivated, which I have not done yet deliberatley. With all of this addtiional information do you have any further suggestions? Thanks for your time and interest my issue.

Want to install Windows 8 on my early 2011 13" MacBook Pro?

Hi guys,
I am planning to install Windows 8 but unsure of a few things, particularly with the version I have to get.
I have an early 2011 13" MacBook Pro, running 10.9.3 and it has never had any previous versions of Windows on it before. Can I simply get the "upgrade" version (which is cheaper), or do I have to get the "full" version to do this? I can't seem to find the "full" version anywhere on the Microsoft website by the way...
I am looking at this: http://www.microsoftstore.com/store/msaus/en_AU/pdp/Windows-8-Pro-Upgrade---Stud ent-Offer/productID.272005100 (student price upgrade version)
Would I be able to install that in Bootcamp? And what sort of files do I get once I pay for and download it?
Thanks for your help

You can only install the upgrade version if you already have a full version of Windows installed. In your case you will need to purchase the full version.
Buy it on disk.

Installing windows 7 on second hard drive in macbook pro 7

Dear fellow forumers. I am currently having trouble installing windows 7 on my second hard disk as whenever I restart my laptop after the bootcamp assistant has made a partition in the HDD, instead of going into windows installation, my laptop screen shows a blank/black screen with a blinking dash at the top corner. I am currently using a 15" macbook pro 2011, installed an OWC ssd as my primary hard drive where I run my os Lion and windows (in another partition). Due to insufficient disk space with the applications in both OS, i am now attempting to install a second windows 7 in a second hard drive which I split the HDD equally into two partitions (one formatted for windows installation and the other for data storage). Just for the information, I am also installing the windows 7 via an external optical drive.
I have been running out of wits as I have been researching whole night about possible oslution but it seems that my problem is quite a peculiar one. Will really appreciat any help that I could receive.
lastly, is it possible to run parallel desktop from my ssd (Primary hard drive) and then attempt to import the bootcamp from my second hard drive?

Well it's not particularly hard, I just don't see why its necessary. It seems silly that I've got to physically start removing hardware from my computer just to get an OS to install on a specific drive.
I was under the impression the Boot Camp gave the option of where to install Windows, as in other drives from the ones with OSX on them.

When installing Windows 8 from a USB to my MacBook Pro 2011 only EFI Boot option shows, there is no normal Windows Boot option

Hello. I want to install Windows 8 on my MacBook Pro 2011 form a USB stick. And when I restart, holding Alt. There only option is EFI Boot, which doesn't work. And there is no usual Windows option. I have tried instaling using an external optical drive, but it doesn't work. And I don't have an internal drive because it has been replaced with a HDD. Please help.

try kunu's solution here and report back
https://discussions.apple.com/thread/5105056?tstart=0

I installed Windows 7 on my early 2011 stock Macbook pro 13" and it cut my RAM in half it syas i only have 2GB when i have 4GB. The version of windows is 7 Ultimate 32 bit

More details-
i Burned the ISO to a DVD and installed it like that, then after the installation i installed all the latest drivers that i downloaded before the HDD partition. the windows partion is 50 GB which seems subsantial as i will only be using it for school programs that arent for mac. (this is off topic but some how without installing anything i have only 20GB of the windows partion left. dont know how this happend). this is all on my early 2011 Macbook pro 13" everything in it is stock, it came shipped with 4gb of RAM and a great Intel I5 dual core 2.3 GHZ with the Intell HD 3000 348MB video.

Hi
32-bit Windows has an address space of 4GB. Part of that is used by system BIOSes and graphics memory. With my Mac Book which has a 1Gb graphics card you only get about 2.6-2.8GB of the RAM which would be addressable and usable.
The following site give more info - http://msdn.microsoft.com/en-us/library/windows/desktop/aa366778(v=vs.85).aspx
Regards
Ian

Install Windows 7 64-Bit on Early 2008 Macbook ?'s

My wife has an early 2008 Macbook with 2.4 GHz processor that I recently upgraded the OS to OS X 10.7.5 and upped the ram to 4 GB. I had installed a Boot Camp for Windows Vista 32-bit that is still working, but I have a Windows 7 64-bit installation disc that I would like to use on this machine. I want to completely delete the existing Windows Vista install and put Windows 7 in its place. I have found through my research that even though the 64-bit version of Windows 7 is "not supported" for this machine, it will still work with the right drivers and will require Boot Camp 4.0
My questions are:
- Will the 64-bit version of Windows 7 definitely work on this machine?
- How would I delete the current Windows Vista installation?
- Where do I get the 64-bit Apple drivers for Windows 7? I keep reading about pulling them from the Snow Leopard install DVD, which I have, but I am currently running OS X Lion on the machine, which I do not have a disc for (only received a download code from Apple). Would the drivers be built-in to Boot Camp 4.0?

1. From Boot Camp Support Software 4.0.4033 (these can be directly downloaded to the Windows side, once Windows is installed).
System Requirements
MacBook (13-inch, Late 2006)
MacBook (13-inch, Mid 2007)
MacBook (13-inch, Late 2007)
MacBook (13-inch, Early 2008)
MacBook (13-inch, Late 2008)
MacBook (13-inch, Early 2009 & Mid 2009)
MacBook (13-inch, Late 2009) *
MacBook (13-inch, Mid 2010) *
MacBook Air (13-inch, Early 2008)
MacBook Air (13-inch, Late 2008 & Mid 2009)
MacBook Air (11-inch & 13-inch, Late 2010) *
MacBook Pro (15-inch & 17-inch, Core 2 Duo)
MacBook Pro (15-inch & 17-inch, 2.2 & 2.4GHz)
MacBook Pro (15-inch & 17-inch, Early 2008) *
MacBook Pro (15-inch, Late 2008) *
MacBook Pro (17-inch, Early 2009 & Mid 2009) *
MacBook Pro (15-inch, Early 2009) *
MacBook Pro (13-inch and 15-inch, Mid 2009) *
MacBook Pro (13-inch,15-inch, and 17-inch, Mid 2010)
MacBook Pro (13-in, 15-inch, and 17-inch, Early 2011 & Late 2011)
Mac Pro (Mid 2006)
Mac Pro (Early 2008) *
Mac Pro (Early 2009)
Mac Pro (Early 2007)
Mac Pro (Mid 2010)
Mac Pro (15-inch and 17-inch, 2.2 & 2.4GHz)
Mac mini (Mid 2007)
Mac mini (Early 2009 & Late 2009)
Mac mini (Mid 2010) *
iMac (17-inch, Late 2006)
iMac (20-inch, Late 2006)
iMac (24-inch, Late 2006)
iMac (20-inch & 24-inch, Mid 2007)
iMac (20-inch & 24-inch, Early 2008)
iMac (20-inch, Early 2009 & Mid 2009)
iMac (21.5-inch & 27-inch, Late 2009) *
iMac (27-inch, Late 2009) *
iMac (21.5-inch, Mid 2010) *
iMac (27-inch, Mid 2010)
iMac (21.5-inch, Mid 2011 & Late 2011)
iMac (27-inch, Mid 2011)
all these drivers support Windows 7, 32 bit
* drivers that support Windows 7, 32 and 64 bit
2. Ensure that the CPU is 64-bit capable. From OSX Terminal...
sysctl -a hw.cpu64bit_capable
hw.cpu64bit_capable: 1

Install Windows on a smart card on a MacBook Retina?

Similar Messages

Maybe you are looking for