Install windows RT on ARM Processor (Tegra 3 processor)

Hi,
I wondering whether I can install windows RT on any off the ARM processor hardware (OUYA gaming console) and I am trying to install it on the below configuration.
Specifications:
Tegra3 quad-core processor
1GB RAM
16GB of internal flash storage
HDMI connection to the TV, with support for up to 1080p HD
WiFi 802.11 b/g/n
Bluetooth LE 4.0
USB 2.0 (one)
ETHERNET
Response much appreciated.

Hi,
How did you get the Windows RT installation media?
Based on my knowledge,Windows RT is a pre-installed system.
If you can install Windows RT,how do you activate this system?
So,I don't think we can install Windows RT on your device.
Regards,
Kelvin Xu
TechNet Community Support

Similar Messages

How to install windows xp

Hey all,
Can I install Windows XP SP3 in Macbook Pro (Processor : i5) ? I tried to install with licensed cd but it giving me error saying insert recognized cd.

You can install XP *inside* a VM such as VirtualBox, Fusion or Parallels under Lion. But BootCmp 4.01 only runs Windows 7.
Some people use VM instead of BootCamp because:
VM is a "memory bubble" that lets nothing like a virus out
Your Windows install is actually a MacOSX file so can be backed up by TimeMachine or CarbonCopyClone

How to scan with my deskjet f2480 in Windows RT for ARM-processor based tablets or computers.

How do I scan a document with my HP Deskjet F2480 in Windows RT for ARM-processor based tablets or computers? I have a microsoft Surface tablet and have no problem printing but it refuses to recognise my deskjet for scanning I have downloaded HP Scan and capture application but no joy

Hi Billjames0151, welcome to the HP Forums. If one of these methods do not enable you to scan on RT: How to Scan Windows RT or Windows 8 Tablets
Then you should try reinstalling it using this method: Install the Printer Software in Windows RT or Windows 8 on a Tablet
I hope that helps.
TwoPointOh
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

I Mini with an i7 processor. I would like to use Boot Camp to install windows based CAD software on my MAC. Would it be better to use a plugin external hard drive to load my software on and if so what hard drive would you recommend?

I Mini with an i7 processor. I would like to use Boot Camp to install windows based CAD software on my MAC. Would it be better to use a plugin external hard drive to load my software on and if so what hard drive would you recommend?

Thank you for your quick response. I can then use a ZIP drive for data storage. I want to keep as much of my hard drive free of data as possible.

Can a 128 ssd storage still effectively work if I install windows 8.1 plus msoffice and a window-based proposal system? I plan to buy a macbook air entry level with 1.7 gh i5 processor.

Can a 128 ssd storage still effectively work if I install windows 8.1 plus msoffice and a window-based proposal system? I plan to buy a macbook air entry level with 1.7 gh i5 processor.

If you are going to use Mac OS X and its associated applications, and a BootCamp partition with Windows 8, and MS Office and all of the work created there, you will more than likely run out of space on a 128 GB SSD pretty quickly...especially if you put any music, photos or videos on it. Those things take a lot of space so you will have to be very, very careful about what you want to put on a 128 GB storage space. You would be better off going for 512 GB with what you plan on doing with it.

Can i install Windows XP in lenovo z570 ideapad CORE i5 processor

anybody help me or suggest me that can i install Windows XP in lenovo z570 ideapad CORE i5 processor with window home premium pre installed.
re
bhaskar

do you want to replace your existing OS or create a multi-boot environment?

Can I install windows 8.1 on my Aspire 5735-6694. Intel core duo processor T6400. 4 GB1 DDR2

I would like to install windows 8.1 on my Aspire 5735-6694 laptop. Intel core 2 Duo processor T6400. 2.0 GHZ 800 MHZ FSB, 2MB L2 cache. 1695 MB mobile intel graphics media accelerator 4500 MHD. 4GB DDR2 memory. 250 GB HDD. DVD multi DL. Appreciate any info anybody can give me. Thank You

You need to run that file on a windows machine.
It will ask you for your product key.
As you progress through the screens it gives you the option to download the iso or make a usb drive install.
I haven't been able to install windows 8.1 either. The windows install fails on me shortly after choosing which drive to install windows on. I can't remember the error message.
Any help on that would be appreciated.

Is there any tutorial for using ARM cortex-A processors of Zynq for digital signal processing ?

Hello, everyone.
Is there any tutorial for using ARM cortex-A processors(such as A9 and A53) of Zynq to deal with digital signal processing problems?
Please tell me , thanks.

Hi
Check below links
http://www.xilinx.com/training/zynq/software-acceleration-for-dsp-functions-with-zynq.htm
https://www.youtube.com/watch?v=ErEG7ZREcJQ
http://www.xilinx.com/support/documentation/application_notes/xapp1170-zynq-hls.pdf
http://www.xilinx.com/support/documentation/application_notes/xapp890-zynq-sobel-vivado-hls.pdf
http://www.xilinx.com/support/documentation/application_notes/xapp1167.pdf

Windows app for JTAGed Texas Instruments processor

Here is the question, my friends.
Can one create a LabVIEW application running on Windows PC controlling the Texas Instruments processor-based system via USB JTAG.
I'd like to write my own applications using LabVIEW instead of GUIs that Texas Instrument starter kit is equipped with.
Thanks!

JungleBoy wrote:
Thanks, nyc!
Still, will You please give some references?
And, LabVIEW example would be brilliant.
ThankS
Go the TI website and to the page for this unnamed processor and see what support documentation they have.
I seriously doubt they will have LabVIEW VIs, but you never know.

How to install 10.7 os in imac i5 processor mac

how to install 10.7 os in imac i5 processor mac

If you are asking how to get Mac OS X 10.7 Lion, it must be purchased; it is not a free update. Lion may still be available if you call the online Apple Store, though a couple of recent threads have reported it as no longer available. If the Apple Store still has it, they will ask for your Apple ID and credit card number and will then send you a code which you can redeem in the Mac App Store. The installer will download to your computer and you just run that (having make a good backup of your data, of course) to install Lion.
Regards.

Installed 10.5 and get code about processor architecture="86" has anyone seen this?

Tried to install 10.5 and get code about processor architecture= "86"

It means your processor isn't capable of running 10.5, sorry

Installing Windows 7 on SSD

Hello
I have a problem with my HP Pavilion Elite HPE - 555sc. I`m trying to install windows 7 on the SSD through recovery disks I ordered from the HP support page. This dosen`t work to the SSD, so i tried doing it to my HDD last night. When the install is done, it does not boot the OS, i just start up with a crash message that there is something wrong with windows, and I should try to choose fix my computer in one of the options in the recovery disk, but I only got the choice installing it again. Tried that, and got the same error.
I have also tried to reinstall to the SSD, by using a different recovery disk. I downloaded and iso. file from microsoft and createt the disk my self, but this version does not support the cd-key I have for my windows. But the biggest problem is that after the install, there seems to be something wrong with the system in general, first of all I don`t have the right drivers installed, which should be an easy fix, after downloading and installing the right ones (Yes I have tried all of them) and restart, the mouse clicker is only active if I press icons on the desktop, but I can`t for example close the page with the mouse nor can I click on the start button. ( I have also tried two other mouses) The keyboard seems to work ok but I there is a few issues with it, but eventually it works.
Is it possible to install the recovery (using f11) to my SSD? I haven`t tried this yet, because I`m not sure it works, and if I now have installed win 7 on the SSD (the one that can not be activated because of the key) Will that effect the recovery if I have to do it to the HDD? And last could there be something other that is wrong? So reinstall dosen`t work at all?
Thanks
Best Regards Kristian

Thank you for the additional information.
The best situation for you is to get your computer to work with the System Recovery disks. Finding the drivers is possible, but not always easy when installing a full version of Windows.
Before going any farther, I suggest that you run the SMART test from the BIOS. This will tell you if your heard drive is working properly.
Here is the System Recovery / Backup / Restore page for the computer. There are a lot of guides to help you.
If the above guides don't help, here is a guide to help you format the hard drive if you use Option 2. Read it thoroughly. This will be like starting with a new hard drive. Once the drive is formatted, you can install Disk 1 of the Recovery disks and reboot.
Signature:
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
HP Photosmart 7520 AIO
++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee.

Monitor calibration problems after installing windows 8.1

I have a hp envy m6-1105tx and right after installing windows 8.1 my monitor changed completely.
When i have a photo open in photoshop tones, colors luminosity, gamma etc are all wrong. Before i never had problems, when i looked at a photo in photoshop and i will see the photo on a different screen it would be basiclally identical but now the photo in photoshop is much different than the actual photo, and this doesn't apply only to photoshop but to everything. I already try to do the calibration through the control panel but it didn't improve the situation, is there a way to get the screen back to the way it was before?
Thanks

Wehodancer, welcome to the forum.
I checked for an updated driver for the video, but there is none for Win 8.1. Therefore, I suggest installing the original driver for the video to see if it helps. It may be that it was corrupted during the update process.
Please click "KUDOS" if I have helped you and click "Accept as Solution" if your problem is solved.
Signature:
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
HP Photosmart 7520 AIO
++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee.

Installing Windows Phone Apps to Windows 8.1

Are Windows Phone applications supposed to installed on Windows 8.1 Pro? The 8.1 Start menu includes the Store application, but most of the apps I need to install refuse to install and insist that they need a Windows Phone account.
Will

Each device processor has it's own architecture (a set of instructions that is supported by a processor), referred by a unique name. So, in the case of desktop, the architecture is x86 (or x86-64). In the case of phones, it's ARM (Advanced RISC Machines)
architecture. Hence, the apps developed for Windows Phone will not be able to run in Windows desktop, and so you're seeing the error message.
Hence, as britishdhez says, you can use the phone emulator. The emulator emulates the ARM architecture in the desktop PC, so Windows Phone apps will run on the emulator without any issues.
Balaji Kundalam

HP Pavilian m7050y & Monitor HP vs 19c keeps crashing after installing windows 7

Hi Forum Experts, hope all is well. Hopefully someone will be able to help me with this problem.
My HP Pavilian m7050y & Monitor HP vs 19c keeps crashing after installing windows 7.
I knew there was a problem when I first installed windows, because the windows logo was not centered on the monitor after intial startups. I did adjust it a little by pressing auto/select on my monitor, and that helped with the centering a bit but it is not perfectly centered.
The screen goes blue and this is the message I get when it crashes and restarts.
Problem has been detected and windows has been shut down to prevent damage
to your computer.
attempt to reset the display driver and recover from timeout failed.
if this is the first time you've seen this stop error screen,
restart your computer, if this screen appears again, follow
these steps:
Check to make sure any new hardware or software is properly installed.
If this is a new installation, ask your hardware or software manufacturer
for any windows updates you might need.
If problems continue, disable or remove any newly installed hardware
or software. Disable BIOS memory options such as caching or shadowing.
If you need to use safe mode to remove or disable components, restart
your computer, press F8 to select Advanced Startup Options, and then
select safe mode.
Technical Information
*** STOP: OX00000116 (0X85E75330, 0X9303C5BC, OX00000000, 0X00000002)
*** atikmdag.sys - Address 9303C5BC base at 9302C000, DateStamp 49f1996c
Collecting data for crash dump ...
Initializing disk for crash dump ...
Beginning dump of physical memory.
Dumping physical memory to disk:
the message is also slightly of to the left it really reads like this.
Problem has been detected and windows has been shut down to prevent damage
o your computer.
ttempt to reset the display driver and recover from timeout failed.
f this is the first time you've seen this stop error screen,
estart your computer, if this screen appears again, follow
hese steps:
heck to make sure any new hardware or software is properly installed.
f this is a new installation, ask your hardware or software manufacturer
or any windows updates you might need.
f problems continue, disable or remove any newly installed hardware
r software. Disable BIOS memory options such as caching or shadowing.
f you need to use safe mode to remove or disable components, restart
our computer, press F8 to select Advanced Startup Options, and then
elect safe mode.
echnical Information
** STOP: OX00000116 (0X85E75330, 0X9303C5BC, OX00000000, 0X00000002)
** atikmdag.sys - Address 9303C5BC base at 9302C000, DateStamp 49f1996c
ollecting data for crash dump ...
nitializing disk for crash dump ...
eginning dump of physical memory.
umping physical memory to disk:
Once windows is fully rebooted all pages, and the display look ok, until it crashes again. I searched for updated drivers on the HP and Windows site but could not find any. The one that is currently installed is called (Generic Pnp Monitor).
Thanks in advance for your expert advice.
Juan.

Thank you for the additional information.
Did you run the Win 7 Upgrade Advisor to assure that your computer is compatible? There may be a problem with compatibility. Also, which version of Win 7 are you running; 32-bit or 64-bit?
Signature:
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
HP Photosmart 7520 AIO
++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee.

Install windows RT on ARM Processor (Tegra 3 processor)

Similar Messages

Maybe you are looking for