Install Windows to new Hard drive from USB system backup

I have bought a new 1TB hard drive for my G580 and have created a USB system recovery drive using Windows 8.1's system restore functionality but when I swap the drives out and try to reset the PC to factory setting settings it fails by saying a partition can't be found. I've formatted partitioned and formatted the new drive but to no avail.
Any ideas?
Solved!
Go to Solution.

I have a Lenovo G580 laptop with UEFI firmware (BIOS) embedded Windows 8 product key. These instructions will work in my computer.
How to install Windows 8/8.1 to a blank hard disk from the Windows 8/8.1 recovery USB flash drive?
http://www.eightforums.com/installation-setup/44021-need-help-reinstalling-windonws-8-usb-2.html#pos...
-or-
How to clean install Windows 8.1 if you have an OEM computer with UEFI firmware (BIOS) embedded Windows 8/8.1 product key?
http://www.eightforums.com/installation-setup/38486-need-help-formatted-genuine-windows-8-lenovo.htm...

Similar Messages

Trying to load windows onto new hard drive from usb, stuck at "starting windows" screen

So I am actually down grading from windows 8 pro to windows 7 pro both 64. I was finally able to get the comp to not only recongize, but load from the usb. My problem is that when it does start up, I get stuck at the "Starting windows" screen. I was wondering maybe I need to format a patition first? It is a new warranty hard drive from Lenovo. (Kind of funny how that send only cds for a laptop that has no cd drive) I looked into formatting from a usb, have had some trouble finding a reliable way.....thanks
Solved!
Go to Solution.

Hi davefromsb,
Windows 8 computers come with a "UEFI" bios and therefore will come with "Secure Boot" as well as "UEFI Only" booting enabled. Disable secure boot if you haven't already, and switch the booting method to "Legacy Only". The problem is most likely that the Windows 7 image that was burned to the USB stick was burned using a MBR partition scheme instead of a GPT one. Hope this helps.
-Brian Chan
My Thinkpads: T42 (GPU failure), T60, W530
W530: Windows 7 Pro | i7-3720qm | FHD screen | 256gb Samsung 840 Pro SSD | 500GB Ultrabay HDD | 16gb Crucial RAM | Nvidia K1000m

How do I reload to my new hard drive from my external backup

Hey All,
I am a little confused and ignorant. My hard drive on my G4 recently started to fail. I was able to copy my entire drive to a Lacie external before it finally died and I had a new hard drive installed.
My question is how do I tranfer all the data on the external back to the new drive. I.E. make it just like it used to be.
I have not installed the OS from the CD's yet, I am curious if there is some trick to upload it all from the Lacie or am I gonna have to upload the OS then go through all of the updates that have happened in the last 3 yrs. Then individually tranfer all of the files from the Lacie.
I am hoping that I can do something. restart the computer and my old wallpaper,Itunes and desktop will magically appear! Hey I said I was ignorant.
Any help will be much appreciated.
Thanks in advance,
Sean
iBook G4 Mac OS X (10.3.4)

If you don't have an OS on the internal drive the iBook should automatically find and boot from the OS on the external FireWire drive.
If it doesn't automatically do it, you can hold down the OPTION key during boot. You can then select the volume to boot from.

How do I transfer all my Firefox saved passwords to my new hard drive and operating system? Going from xp to windows 7.

How do I transfer all my Firefox saved passwords to my new hard drive and operating system? Going from xp to windows 7. I have the old hard drive hooked up as drive f. Can I copy and paste from old drive directory to new drive directory?

You need to copy 2 files, key3.db and signons.sqlite, from the old [[profiles|profile folder]] to the profile folder on the new computer.

Installing Windows to external hard drive or using parallels?

Will installing Windows on external hard drive protect mac from viruses better than parallels? Which option is more sound, installing windows on external hard drive or using parallels? My main concern is mac protection. Thanks

Hi,
Thank's for your reply.
Using Parallels and creating a virtual machine, I think it should be possible installing Windows to an external hard drive, shouldn't it?
Message was edited by: Oleguer Vilella

I reinstalled my system on a new hard drive, from time machine. However my old photos seem corrupt within aperture. iphoto seems okay. Have you heard of this?

I reinstalled my system on a new hard drive, from time machine. However my old photos seem corrupt within aperture. iphoto seems okay. New photos take a long time to load as well.
Have you heard of this?
Thanks

We need a little more information to be able to help.
However my old photos seem corrupt within aperture.
What kind of corruption? And when do you see it? All your images, or only some? Are the images distorted, discolored, or not displayed at all?
Are you shooting in raw? Is your library referenced or managed? Is your library on your system volume or on an external harddrive?
And it would help to know your MacOS version and Aperture version too.
Regards
Léonie

I need to deactivate this copy of Acrobat X to install on a new hard drive.

I need to deactivate this copy of Acrobat X to install on a new hard drive. When I click on help, there os no Deactivate or Activate. Wjat do I do?

I do not know. I have a serial/key number for the software. Can I
install it again and use the same number?
Denis

Mediasmart software problem loading onto computer with new hard drive and operating system

My computer recently crashed and I had to buy a new hard drive and operating system. None of the programs from the old hard drive were saved. The computer is an HP Pavilion dv7-3165dx Entertainment Notebook and I have Windows 7 Professional (64x) as the operating system. Tried to download Mediasmart from the HP Web page to play DVD and Blu-Ray Discs. The programs downloaded but will not install. Any suggestions?

waynesworld57 wrote:
My computer recently crashed and I had to buy a new hard drive and operating system. None of the programs from the old hard drive were saved. The computer is an HP Pavilion dv7-3165dx Entertainment Notebook and I have Windows 7 Professional (64x) as the operating system. Tried to download Mediasmart from the HP Web page to play DVD and Blu-Ray Discs. The programs downloaded but will not install. Any suggestions?
Hi,
It looks like it's a common issue: http://h30434.www3.hp.com/t5/TX-TM-Series-Notebooks-Reply-Only/HP-Mediasmart-Software-package-for-Wi...
Try VLC as a multimedia player: http://www.videolan.org/vlc/download-windows.html
Dv6-7000 /Full HD/Core i5-3360M/GF 650M/Corsair 8GB/Intel 7260AC/Samsung Pro 256GB
Testing - HP 15-p000
HP Touchpad provided by HP
Currently on Debian Wheeze
*Please, help other users with the same issue by marking your solved topics as "Accept as Solution"*

Restore using Time Machine to new hard drive, but last "full" backup was 2012. how do I restore the rest of the Time Machine backups, particularily IPHOTO libraries for each user?

Restore using Time Machine to new hard drive, but last "full" backup was in 2012. How do I restore the rest of the Time Machine backups, particularily IPHOTO libraries for each user?
I entered Iphoto for my user and only photo up until 2012 were in the library. I thought the restore would do the incremental Time Machine backups too.....
Running 10.8.2

It usually means you are running Mavericks but have an earlier version of iPhoto. Open the App Store and upgrade your version of iPhoto to the Mavericks version.
The iWork apps are free with a new iOS device since 1 SEP 2013. They are free with a new Mac since 1 OCT 2013. They are also free with the upgrade to OS X Mavericks 10.9 if you had the previous version installed when you upgraded.The iWork apps are free with a new iOS device since 1 SEP 2013. They are free with a new Mac since 1 OCT 2013. They are also free with the upgrade to OS X Mavericks 10.9 if you had the previous version installed when you upgraded.
iWork and iLife for Mac come free with every new Mac purchase. Existing users running Mavericks can update their apps for free from the Mac App Store℠. iWork and iLife for iOS are available for free from the App Store℠ for any new device running iOS 7, and are also available as free updates for existing users. GarageBand for Mac and iOS are free for all OS X Mavericks and iOS 7 users. Additional GarageBand instruments and sounds are available for a one-time in-app purchase of $4.99 for each platform.

Having trouble installing and configuring new hard drive

I bought a larger (320GB) Hitachi hard drive for my T61, to replace the 100GB that came with the computer. I had no touble making the physical installation, but can't boot up and use the new drive. I:
--used Acronis software (True Image 11 and Disk Director) to partition the new drive. The new partitions are proportionately larger than on the old drive.
--copied files from my original HD to the new one.
--tried, unsuccessfully, to boot up from the new drive.
--tried Thinkvantage software, but it wouldn't (1) recognize any external drives (USB HDD or my backup drive, also an external); (2) let me change the order of my boot devices (I get a synbtax-challenged message: "All items on this menu cannot be modified in user mode...[C]onsult your system supervisor." Well, *I'm* the "system supervisor," and I still can't get the program to let me edit the boot order).
I have tried to boot the new drive from original OS software (XP Pro), with no success. Same deal with Acronis's emergency book disk. At the moment, I'm letting Thinkvantage reformat and (maybe) reinstall everything that was originally on the factory computer. Whether it'll actually do this on a new and larger hard drive, I guess I'll eventually find out. If it works, I'll then try to restore my real files with Acronis.
Has anybody else had to deal with this exciting sequence of events?
--Fred Powledge

Lets start afresh. First do you want an XP or Vista system on your new hard drive? Do you know if the recovery disks you got with your system are for the operating system you want on the new drive?
If you bought a Vista machine with XP downgrade Vista will be preinstalled on the system and it gets delivered with XP recovery disks. The opposite can also be true the machine is delivered with XP installed and with Vista recovery disks. Iin both cases if you want to upgrade to a new hard disk on the preinstalled operating system you must first yourself burn recovery disks for the preinstalled system. Start -- All programs -- Thinkvantage -- Create Product Recovery Media, first disk must be CD the last two can be DVDs.
When you are sure you have the right set of recovery disks XP or Vista, boot from them and let them format the disk. They will automatically install the service partition and use all the remaining space of the new hard drive for the C partition. When I think about it even for Vista on the T61 there will be only two partitions C: and a hidden partition for the RnR service partition. The S and Q partitions only apply to the new T400/500 -- I should not have mentioned them.
If its the recovery disks that were delivered with the machine that are the right one for the op sys you want on the new hard drive and they dont produce a bootable system -- call Lenovo support and get new ones.
The details for Acronis I can't help you with -- I used my Windows home server backup when I restored my C: partitions on the new hard drives both on my T500 and my T42. Just be careful you dont mix up which is the old and new C: partition so you dont destroy the C. partition on the old hard disk by mistake. But as long as you don't point Acronis to the old hard disk the worst that can happen is you have to rerun the restore to factory settings on the new drive once more.
T500: Vista 32, 2.8GHz, 4GB RAM, 15.4" 1680x1050, 500GB 7200rpm, ATI Radeon HD3650 + Intel 4500MHD. T42: XP, 1.7GHz, 2GB RAM, 14.1" 1024x768, 250GB PATA, ATI Radeon 7500.

Restore new hard drive from an older one

so i only have 120gb on my current hard drive. im planning on getting a 500gb hard drive to put into my mac, and buy a case for the 120gb hd so i can use it as an external hard drive. the problem is, i dont have an existing external hard drive, so the 120gb one is all i have. i want to keep all my music and photos and all that stuff, so im wondering if i can just replace the internal hard drive with the 500gb one, then connect the 120gb one via usb and restore away.
also: when i install the new hard drive, will i need to use the leopard installation dvd to install, and then transfer my files from my external hd?or will i just be able to transfer everything from the external hard drive right away? and since the external hd should be bootable, when i choose to transfer files from the external(using migration assistant or whatever) should i click use *transfer from existing mac* or *transfer from an external volume* or smth?
thx in advance for the help
Kenneth

i want to keep all my music and photos and all that stuff, so im wondering if i can just replace the internal hard drive with the 500gb one, then connect the 120gb one via usb and restore away.
Yes. Put it into an enclosure such as the case you mentioned and connect it to the computer.
when i install the new hard drive, will i need to use the leopard installation dvd to install, and then transfer my files from my external hd?
Use the installation DVD, or place the 500GB drive in an enclosure, use a tool such as SuperDuper or Carbon Copy Cloner to clone your current system to it, put the drive into the computer, and start using it immediately. No migration is needed in the second case.
when i choose to transfer files from the external(using migration assistant or whatever) should i click use transfer from existing mac or transfer from an external volume or smth?
If that step is needed, transfer the data from an external volume.
(44542)

Problems with copying iPhoto library onto new hard drive from external HELP

I had to get a new hard drive installed onto my MacBook Pro, but was able to copy my iPhoto library onto my external hard drive via another computer before the old hard drive failed. Now, I am trying to copy that library back onto my MacBook.
After I copied the library onto the MacBook, when iPhoto was opened, it showed no photos but I could see album titles. Then when I opened iPhoto while holding down the option key, it was all clumped into one event and not nearly all of the photos were there. Also, I have right-clicked on the library to see package contents and everything seems to be there, but I don't know how to make it all show up in the library.
I've downloaded iPhoto Library Manager because I thought that might help (but haven't used it yet -- don't know how) and I just need some help to recover my iPhoto library... and is there a way to restore all the separate events imported and time/date stamps, in order to get all the photos in chronological order?

Should I just go through the iPhoto Library package contents and drag every folder into iPhoto?
No. That will get you massive duplication.
Try these in order - from best option on down...
1. Do you have an up-to-date back up? If so, try copy the library6.iphoto file from the back up to the iPhoto Library (Right Click -> Show Package Contents) allowing it to overwrite the damaged file.
2. Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
3. If neither of these work then you'll need to create and populate a new library.
To create and populate a new *iPhoto 08* library:
Note this will give you a working library with the same Events and pictures as before, however, you will lose your albums, keywords, modified versions, books, calendars etc.
In the iPhoto Preferences -> Events Uncheck the box at 'Imported Items from the Finder'
Move the iPhoto Library to the desktop
Launch iPhoto. It will ask if you wish to create a new Library. Say Yes.
Go into the iPhoto Library (Right Click -> Show Package Contents) on your desktop and find the Originals folder. From the Originals folder drag the individual Event Folders to the iPhoto Window and it will recreate them in the new library.
When you're sure all is well you can delete the iPhoto Library on your desktop.
In the future, in addition to your usual back up routine, you might like to make a copy of the library6.iPhoto file whenever you have made changes to the library as protection against database corruption.
Regards
TD

Help Restoring New Hard Drive from Time Machine

To replace a failing Macintosh HD, I created an OS X Mountain Lion boot disk on a flash drive, put my new hard drive in a USB external dock, booted to the flash drive, partitioned and formatted the new drive (selecting GUID partition), and have tried and failed three times to restore from Time Machine, which is on a Firewire-connected drive. The error I get is that it's unable to create a restore disk.
I could reformat the new drive and try again, but is there something else I'm missing? For example, should I have left the new drive in the external dock, or should I move it to bay 1 and then try to restore, considering that latency is a possible issue or that Time Machine won't restore to a USB drive?

Why don't you install ML on it and then see?
Better yet use any of the 4 internal drive bays instead of USB - slow and terrrible place!
It does not matter where or what drive bay.
Unable to unmount drive.
CLONE your system - a couple times, pure Apple Mac OS once you have one and later for working copy and one before you install or apply updates or programs or otehr changes.
CCC carbon copy cloner - will create recovery partition when you clone a system.
I assume your flash drive works, not everyone is successful first shot.
I prefer a clean install to start with. Esp as you say your system was failing I don't like relying on the Time Machine for everything.

Installing Software on new hard drive

I have a mac book pro mid 2009.Its hard drive died .I replaced it with a new Seagate Momentus hard drive. I have a installation CD that came with the laptop.
I installed new drive. Started laptop with installation CD. It is asking me where to install the programe, in this window it is not seeing my hard drive. But when I go to Disk Utility, it is showing me new hard drive. At the bottom in this window it is saying unfomatted hard drive . I tried formating with single Partion. It is saying " cannot allocate memory. I am stuck here any help will me appreciated

Try powering up, pushing in the dic holding the C key, this will make the machine boot from the disc.
Then select your language, click contine to the next screen, in the menubar click on utilities/disk utility. Hight light the Seagate drivr in the left column, click the erase tab, format it Mac OS Extended (Journaled) Name it (Macintosh HD is the usual default name and click erase. When it finishes, quit disk utilities, eject the disk, shut down.
Power back up put in the disc and follow the prompts for an install.
Hope this helps

Re-installing nano with new hard drive.

My hard drive unfortuantely had to be replaced. All my data was lost including my mp3 and m4a files. I have re-installed my ipod nano, but is there anyway I can move the songs on my ipod back to my new hard drive?... I know ipods arent designed to transfer songs, I was wondering if there is a work around.

You can't sync or drag your music back directly from an iPod to iTunes, however there are a number of third party utilities that you can use to retrieve the music files and playlists from your iPod, this is just a selection. Have a look at the web pages and documentation for these, they are generally quite straightforward. I use Senuti but check the others out and choose whichever you are happy with.
Senuti Mac Only
iPodRip Mac Only
PodWorks Mac Only
iPod.iTunes Mac Only
iPod Access Mac and Windows Versions
YamiPod Mac and Windows Versions
PodUtil Mac and Windows Versions
iPodCopy Mac and Windows Versions

Install Windows to new Hard drive from USB system backup

Similar Messages

Maybe you are looking for