Install Windows with Windows Deployment - Driver is not signed - Pavilion 500-503ns

Hello, I've purchased a Pavilion 500-503ns at the HP Store. My issue is when I try to install a image throught Windows Deployment Services. Boot image starts correctly but when boot.wim executes a message appears. Network driver (Realtek LAN) is missing in the image boot.wim server. I've try to add the files .inf downloaded by hp.com drivers section but Windows Deployment Services can't add this drivers to the image because there aren't signed by Realtek. Any ideas to add this drivers without signature? Where I could find this drivers signed? Thanks

Hi: The only suggestion I can offer would be to try the ethernet driver directly from Realtek. The second driver on the list is for W7 32/64 bit. http://www.realtek.com.tw/downloads/downloadsView.aspx?Langid=1&PNid=13&PFid=5&Level=5&Conn=4&DownTypeID=3&GetDown=false

Similar Messages

How do I install itunes with Windows 7?

how do I install itunes with Windows 7? I always get a Windows Installer error or administrator error __

Have tried: download but do not install iTunes, then turn off virus protection and firewall, restart computer, login as admin, then run the iTunes insallation. After it installs, restart virus protection and firewall and logout and back in as standard user.
Windows leaves installers running or still resident which conflict with the iTunes installer.

While installing itunes with windows 7, i get error -the feature you are trying to us is on a network resource that is unavailable-

While installing itunes with windows 7, i get error -the feature you are trying to us is on a network resource that is unavailable-

That doesnt work for me. I removed itunes through the windows cleaner method as shown in other posts and re-installed itunes. Now im getting this error
iTunes was not installed correctly. Please reinstall iTunes
Error 7 (Windows error 126)
Also my Microsoft office has stopped working after i deleted Itunes which is really strange.
Can somebody provide me a solution please....

Help for downloading/installing PSE13 with window 8.1?

I get this message after intall attempts ..."Installer has detected that a machine restart may be pending. Its recommended that you quit the installer, restart your machine and try installing again," Lightroom, however, installed fine.

Thank you for responding. I got some advice from a Microsoft forum....it worked. Thanks again.
From: Pat Willener <[email protected]>
To: kathryn kramar <[email protected]>
Sent: Saturday, January 3, 2015 10:56 PM
Subject: help for downloading/installing PSE13 with window 8.1?
help for downloading/installing PSE13 with window 8.1?
created by Pat Willener in Downloading, Installing, Setting Up - View the full discussion
pwillener wrote: What is your operating system?
Sorry, you specified Windows 8.1 in the subject line. If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7063274#7063274 and clicking ‘Correct’ below the answer Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7063274#7063274 To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"
Start a new discussion in Downloading, Installing, Setting Up by email or at Adobe Community For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

I get an error message when installing itunes with windows 8, error message is error occured while attempting to create the directory C:\program file(x86)\common files\apple\mobile device support\sync services\schemas\outlook.syncschema

I keep getting an error message when installing iTunes with windows 8

See the second box in Troubleshooting issues with iTunes for Windows updates.
tt2

Hi..Iam an Architect...I would like to purchase a macbook pro 15.4 inch 512 gb, 16 gb.So i would like to know the possibilities and advantages of using 3d softwares and autocad.And also is 3dsmax available for mac os or should i install it with windows.

hi..Iam an Architect...I would like to purchase a macbook pro 15.4 inch 512 gb, 16 gb.So i would like to know the possibilities and advantages of using 3d softwares and autocad.And also is 3dsmax available for mac os or should i install it with windows.

System Requirements for AutoCAD 2013 for Mac:
Apple® Mac OS® X v10.8.0 or later (Mountain Lion), OS X v10.7.2 or later (Lion), or OS X v10.6.8 or later (Snow Leopard) with 64-bit Intel processor
Apple® Mac® Pro 4.1 or later; MacBook® Pro 5.1 or later (MacBook Pro 6.1 or later recommended); iMac® 8.1 or later (iMac 11.1 or later recommended); Mac® mini 3.1 or later (Mac mini 4.1 or later recommended); MacBook Air® 2.1 or later; MacBook® 5.1 or later (MacBook 7.1 or later recommended)
3 GB of RAM (4 GB recommended)
2.5 GB free disk space for download and installation (3 GB recommended)
All graphics cards on supported hardware
1,280 x 800 display with true color (1,600 x 1,200 recommended)
All Mac OS X supported language operating systems
Apple® Mouse, Apple Magic Mouse, Magic Trackpad, MacBook® Pro trackpad, or Microsoft-compliant mouse.
Mac OS X-compliant printer
Additional Requirements for 3D Modeling (All Configurations)
Pentium 4 or Athlon processor, 3 GHz or greater or Intel or AMD dual-core processor, 2 GHz or greater
4 GB RAM or more
6 GB hard disk space available in addition to free space required for installation
1,280 x 1,024 true color video display adapter 128 MB or greater, Pixel Shader 3.0 or greater, Direct3D®-capable workstation-class graphics card
3ds Max 2014 and 3ds Max Design 2014 are available for windows only:
System requirements for 3ds Max 2014 and 3ds Max Design 2014
Windows 8 or Windows® 7 64-bit Professional operating system
64-bit Intel or AMD multi core processor
4 GB RAM minimum (8 GB recommended)
4.5 GB free disk space for installation
3-button mouse
Latest version of Microsoft® Internet Explorer®, Apple® Safari®, or Mozilla® Firefox® web browser
Recommened Mac:
15-inch MacBook Pro with Retina display : 15.4-inch (diagonal) LED-backlit display with IPS technology
2880-by-1800 native resolution at 220 pixels per inch with support for millions of colors
Hardware
2.4GHz quad-core Quad-core Intel Core i7
16GB 1600MHz DDR3L SDRAM
512GB Flash Storage
Autodesk AutoCAD 2014 for Windows vs AutoCAD 2013 for Mac
USER INTERACTION Windows Mac
Command line
✓
✓
Multifunctional grips
✓
✓
Dynamic input
✓
✓
Auto-complete command entry2
✓
✓
Hide and isolate objects
✓
✓
Create and select similar objects
✓
✓
Delete duplicate objects
✓
✓
Properties palette
✓
✓
Quick properties palette
✓
Quick view
✓
✓
In-canvas viewport controls
✓
✓
Editable UCS icon
✓
✓
Layer tools3
✓
✓
Layer groups
✓
✓
Layer state manager4
✓
New layer notification
✓
Filter
✓
Quick select
✓
DesignCenter
✓
Tool palettes
✓
Content palette
✓
Navigation bar
✓
ShowMotion
✓
Coverflow navigation
✓
Multi-touch gestures
✓
AutoCorrect command entry
✓
File tabs
✓
DOCUMENTATION
Geometry creation & measurement tools
✓
✓
Parametric constraints
✓
✓
Associative arrays
✓
✓
Copy array
✓
✓
Object and layer transparency
✓
✓
Strike-through text
✓
✓
Blend curves
✓
✓
Multiple hatch editing
✓
✓
Sheet set manager
✓
Project manager
✓
Dynamic blocks5
✓
✓
Model documentation tools
✓
Table style editing
✓
Hatch creation preview
✓
Multiline style creation
✓
Digitizer integration
✓
Change space
✓
Express tools6
✓
Text align
✓
DESIGN
Solid, surface, and mesh modeling
✓
✓
Surface curve extraction
✓
✓
PressPull
✓
✓
Autodesk materials library
✓
✓
Material creation, editing, and mapping
✓
Basic rendering
✓
✓
Sun properties7
✓
✓
Visual styles7
✓
✓
Advanced rendering settings
✓
Camera creation
✓
Walkthroughs, flybys, and animations
✓
Autodesk ReCap point cloud tool
✓
Import Sketchup files (SKP)
✓
Geographic location
✓
CONNECTIVITY
External references (DWG)
✓
✓
Image underlays
✓
✓
PDF underlays
✓
✓
DWF underlays
✓
DGN underlays
✓
In-place editing of DWG references
✓
✓
Batch publish
✓
✓
Publish or plot to PDF
✓
✓
Plot styles
✓
✓
Plot style table editor
✓
✓
AutoCAD WS connectivity
✓
✓
Autodesk 360 connectivity
✓
Data links
✓
Data extraction
✓
Hyperlinks
✓
Markup set manager
✓
dbConnect manager
✓
eTransmit
✓
WMF import and export
✓
FBX import and export
✓
SAT import and export
✓
✓
Additional model import
✓
Design feed
✓
Share on Facebook
✓
LICENSING
Standalone licensing
✓
✓
Network licensing
✓
✓
Cross-platform licensing
✓

How to install icloud with windows 8.1pro

What is required to install iCloud with Windows 8.1 Pro Operating System. I keep getting install error even though I change compatibility to Windows 7.

What install error - verbatim? What source of Download - iCloud for Windows ?? - ÇÇÇ

I dont have ilife on my macbook air, i tried installing it with the reinstall drive still its not happening what should i do?, i dont have ilife on my macbook air, i tried installing it with the reinstall drive still its not happening what should i do?

i dont have ilife on my macbook air, i tried installing it with the reinstall drive still its not happening what should i do?, i dont have ilife on my macbook air, i tried installing it with the reinstall drive still its not happening what should i do?

Hi,
use Carbon Copy Cloner http://www.bombich.com/ to clone the OSX from your internal SSD to the external USB-connected one.
Boot OSX from the external harddisk and install what programs/apps you want.
No need to buy another OSX as Apple explicitly allows such usage.
I don't have a MBA so I can't comment on the USB-hub.
Regards
Stefan

I keep getting an error message when trying to log on to FaceTime and iMessage on my iPad mini with wifi...could not sign in. Please check your network connection and try again. Help!

I keep getting an error message when trying to log on to FaceTime and iMessage on my iPad mini with wifi...Could not sign in. Please check your network connection and try again. Help!

Using FaceTime http://support.apple.com/kb/ht4319
Troubleshooting FaceTime http://support.apple.com/kb/TS3367
The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
http://tinyurl.com/a7odey8
Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/TS4268
Using FaceTime and iMessage behind a firewall
http://support.apple.com/kb/HT4245
iOS: About Messages
http://support.apple.com/kb/HT3529
Set up iMessage
http://www.apple.com/ca/ios/messages/
Troubleshooting Messages
http://support.apple.com/kb/TS2755
Setting Up Multiple iOS Devices for iMessage and Facetime
http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
FaceTime and iMessage not accepting Apple ID password
http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/
Unable to use FaceTime and iMessage with my apple ID
https://discussions.apple.com/thread/4649373?tstart=90
For non-Apple devices, check out the TextFree app https://itunes.apple.com/us/app/text-free-textfree-sms-real/id399355755?mt=8
 Cheers, Tom

My apple keyboard had some problems, the store replaced it for me. I had to sign in to my computer, and couldn't get to pair the keyboard with the computer, as could not sign in. I know there is a command that lets you override this, does anyone know whic

My apple keyboard had some problems, the store replaced it for me. I had to sign in to my computer, and couldn't get to pair the keyboard with the computer, as could not sign in. I know there is a command that lets you override this, does anyone know which buttons to press. I gather when you do this, a box comes up and pairs the two with a number you have to type in.

Hi rpaspinall,
Thanks for using Apple Support Communities.
For more information on this, take a look at this article:
Apple Wireless Keyboard: Difficulty during pairing process
http://support.apple.com/kb/ts1569
Best of luck,
Mario

Cannot install windows 7 as cd drive does not reganise disc

Hi
Trying to install windows 7 on bootcamp but cd drive does not reganise the disc & keeps rejetting, please help
Nudge1

Hi
The CD/DVD driver is part of the Microsoft system and also available on the Windows 7 installation disk.
Therefore there are no special CD/DVD drivers available.
I read about this theme in different forums and also on Microsoft support forum and mostly this issue appear if the Windows system disk is faulty/damage.
I dont know from where you got this disk but I recommend you to download an Windows iso file from Microsoft server as mentioned here:
http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=73726
Then you could create own Windows installation disk or USB flash memory stick
The serial key which you got with the Windows disk could be used for activation.

2012R2 Deployment with WDS yields Driver could not be installed error

Hi
I'm using WDS installed on a 2008R2 SP1 server. My boot image is from Windows 2012. When I deploy a Windows 2012
R2 image I recive an error dialog during setup that states "Windows installation cannot continue because a required driver could not be installed." In checking the setupact.log file it appears as though setup can't find pkgmgr.exe.
If I use the boot image from 2012 R2 then it works fine. I want to continue using my existing boot image from 2012. Any thoughts on why this is failing?
Setupact.log excerpt:
2014-02-12 06:55:33, Info       [0x0a0023] UI     progress task ProgressInfo\InstallingDrivers : StartProgress
2014-02-12 06:55:33, Info                         Driver Install:=============================================
2014-02-12 06:55:33, Info                         Driver Install:    Driver Path:   [\\167.68.251.22\REMINST\Stores\Drivers\vmxnet3ndis6.inf_x64_{E58F290F-F1A5-486A-BF8C-2A97B42FF9F8}\vmxnet3ndis6.inf]
2014-02-12 06:55:33, Info                         Driver Install:    Attempting driver install.
2014-02-12 06:55:33, Info                         Driver Install:    Driver Arch:   [9]
2014-02-12 06:55:33, Info                         Driver Install:    Driver Root:   [D:\WINDOWS]
2014-02-12 06:55:33, Info                         Driver Install:    Driver Drive: [D:\]
2014-02-12 06:55:33, Info                  CSI    00000001 Shim considered [l:256{128}]"\??\D:\WINDOWS\Servicing\amd64_microsoft-windows-servicingstack_31bf3856ad364e35_6.3.9600.16384_none_fa1dc1539b4180d8\pkgmgr.exe"
: got STATUS_OBJECT_PATH_NOT_FOUND
2014-02-12 06:55:33, Info                  CSI    00000002 Shim considered [l:250{125}]"\??\D:\WINDOWS\WinSxS\amd64_microsoft-windows-servicingstack_31bf3856ad364e35_6.3.9600.16384_none_fa1dc1539b4180d8\pkgmgr.exe"
: got STATUS_OBJECT_NAME_NOT_FOUND
2014-02-12 06:55:33, Info                  CSI    00000003 Shim considered [l:236{118}]"\??\x:\sources\amd64_microsoft-windows-servicingstack_31bf3856ad364e35_6.3.9600.16384_none_fa1dc1539b4180d8\pkgmgr.exe"
: got STATUS_OBJECT_PATH_NOT_FOUND
2014-02-12 06:55:33, Info                  CSI    00000004 Shim considered [l:236{118}]"\??\x:\sources\amd64_microsoft-windows-servicingstack_31bf3856ad364e35_6.3.9600.16384_none_fa1dc1539b4180d8\pkgmgr.exe"
: got STATUS_OBJECT_PATH_NOT_FOUND
2014-02-12 06:55:33, Info                  CSI    00000005 Shim considered [l:112{56}]"\??\D:\WINDOWS\Servicing\6.3.9600.16384_amd64\pkgmgr.exe" :
got STATUS_OBJECT_PATH_NOT_FOUND
2014-02-12 06:55:33, Info                  CSI    00000006 Shim considered [l:106{53}]"\??\D:\WINDOWS\WinSxS\6.3.9600.16384_amd64\pkgmgr.exe" : got
STATUS_OBJECT_PATH_NOT_FOUND
2014-02-12 06:55:33, Info                  CSI    00000007 Shim considered [l:92{46}]"\??\x:\sources\6.3.9600.16384_amd64\pkgmgr.exe" : got STATUS_OBJECT_PATH_NOT_FOUND
2014-02-12 06:55:33, Info                  CSI    00000008 Shim considered [l:92{46}]"\??\x:\sources\6.3.9600.16384_amd64\pkgmgr.exe" : got STATUS_OBJECT_PATH_NOT_FOUND
2014-02-12 06:55:33, Error                 CSI    00000009 (F) HRESULT_FROM_WIN32(ERROR_PATH_NOT_FOUND) #1# from SssBindServicingStackParams={cb=00000040, flags=00000214,
image={cb=00000010, flags=00000000, pcwszWindir=[10]"D:\WINDOWS"}} Cookie=(inner-null), Disp=1[gle=0x80070003]
2014-02-12 06:55:33, Error                 CSI
0000000a@2014/2/12:14:55:33.601 (F) base\wcp\shim\binder.cpp(624): Error HRESULT_FROM_WIN32(ERROR_PATH_NOT_FOUND) originated in function SssBindServicingStack expression: (pInputParameters->dwFlags &
(0x00000020))
[gle=0x80004005]
2014-02-12 06:55:33, Info                         Driver Install:    Driver Flags: [1]
2014-02-12 06:55:33, Info                         Driver Install:    Driver State: [5]
2014-02-12 06:55:33, Info                         Driver Install:    Driver Size:   [10823664]
2014-02-12 06:55:33, Info                         Driver Install:    Driver Dest:   []
2014-02-12 06:55:33, Info                         Driver Install:    Driver Result: [0x80070003]
2014-02-12 06:55:33, Info       [0x0603b2] IBS    CallBack_InstallDriversOffline:Install Return [0x80070003]
2014-02-12 06:55:33, Info       [0x0a0024] UI     progress task ProgressInfo\InstallingDrivers : EndProgress
2014-02-12 06:55:33, Error      [0x0b00ae] WDS    CallBack_WdsClient_OfflineDriverInjectionEvents: Problem processing offline driver package injection event. Error code [0x80070057].
2014-02-12 06:55:33, Info       [0x0640ae] IBSLIB PublishMessage: Publishing message [Windows installation cannot continue because a required driver could not be installed.]
2014-02-12 06:55:33, Info       [0x0a013d] UI     Accepting Cancel. Exiting Page Progress.

Hi,
The WinPE version is 4.0 in using boot image on Windows Server 2012, which does not support deploy Windows 8.1/2012 R2.
You should use WinPE 5.0 (from Windows Server 2012 R2) as you just tested.
If you have any feedback on our support, please send to [email protected]

Cant install windows with 2 hard drives attached

i have an sata drive that i use for boot drive and ata for back up. i can not install windows on the sata drive if the ata drive is hooked up. windows only sees the ata drive. it will not give me a choice to install on the sata. if i unhook the ata i can install just fine on the sata. does anyone have any ideas why?
it's like when i have windows installed on the sata drive, then the windows xp pro cd does see it and lets me install on that drive only, it won't let me choose sata or ata. but if there is no OS installed on anything it only goes to the ata drive. i only want to install windows on the sata drive and do not want to keep unhooking my ata drive constantly when i reinstall windows on the sata.
can someone please help?

Danny you don't have to stay out, I just already said stuff and you told me to do something i already said i did.
Here is my current settings to get it to show my ata drive in windows and i boot from the sata cus windows is on it. currently when i install windows if no OS is on either drive it will auto install on the ata and i don't want that. i want to have a choice what drive and where to install on which means i would always install on the sata drive. but it just installs on the ata not giving me a choice. if windows is installed on the sata already then it will offer me that drive only and not allow me to select the ata. when i do a complete reformat reinstall i must unhook the ata drive and then it will work on the sata drive.
on chip ata mode - legacy
ata config- sata only
sata keep enabled - yes - greyed out. i had to mess with other native or something mode and change it to yes in order to get it like this and work for me. why?
pata keep enabled - yes- adjustable
pata channel selection - both
combined mode option - pata 1st channel - greyed out
sata ports definition - p0-1st./p1-2nd. adjustable
config sata as raid - no, greyed out.
is this a weird set up? and exactly how do i get it so i never have to unhook my ata drive again?
each drive they are all on their own channels. ata by itself, dvdrw by itself and sata by itself. all master.

Installing Firefox with windows 7 64bit mode just does not work.

I have windows 7 64bit mode. I cannot install firefox, it crashes all the time when I open it. I know the problem is because my windows 7 is in 64bit mode. Can you (firefox support) or someone on this forum provide the simple and easy steps of getting it to work. Also can you (firefox) hurry up and release a 64bit version. I'm using google chrome and crazy browser as they seem to have no problems at all. I really want to use firefox but it just won't set up for me because I'm running win7 64bit mode. If I was running win7 32bit mode I wouldn't be having any issues. Has anyone out there got a simple step by step solution for this? It it mind boggling that with todays technology no one has a simple fix for this issue. Help!!!!!
== User Agent ==
Mozilla/5.0 (Windows; U; Windows NT 6.1; en-US) AppleWebKit/533.4 (KHTML, like Gecko) Chrome/5.0.375.70 Safari/533.4

I have been running Win 7 64 bit on an HP Pavilion lap for several months. The whole browser thing has been a nightmare. My work involves heavy duty internet research. Firefox crashes every few minutes. There is no specific event I can find that kicks this off, but running the latest Flash Players and Adobe Reader makes it a lot worse. In fact, I had to set up the adobe reader to not run within the Firefox window. I had to back off to an old version of adobe Reader and Flash Player to accomplish this. I love Firefox. I was disappointed to have to uninstall it as it was impossible to run searches with it.
So then it proved to be that IE either version 8 or 9 was even worse. I could not keep it up long enough to run a search.
So I installed Chrome which has some nice features, but it also crashes, albeit more gracefully so I do not lose my place and it makes a quick recovery but there are many online applications where Chrome just does not work.
My son also has Win7 64 bit and says he is also having the same problems.
I want my Firefox back! Please fix it.

"User Not Recognized" when installing UPK with Windows Authentication

Hi all,
When installing UPK Server with Windows Authentification mode, everything work fine until when the installer starts populating the Library. I get an error message saying "User is not recognized. Please enter a valid administrator user name and password. Click OK to enter another name or click Cancel to stop the upgrade process."
I tried using "my current Window account" and different Windows account when asking to give a default Developer admin login during the install but I still get the same message.
I might be forgeting something this time since I have installed UPK tones of times and never got this error.
Many thanks.

Hello,
Thank you!! After much testing and environment and OS changes, I found out that I totally forgot my Windows administration from over 7 years ago on a security feature that Microsoft put into their OS's. If you are using a friendly DNS name to publish to your clients (instead of them typing in the server name as the URL) and you want to utilize Windows authentication, a registry entry will need to be entered in order for the OS to be allowed to pass the windows auth through to that URL as well.
Example registry entry:
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Lsa\MSV1_0]
"BackConnectionHostNames"=hex(7):
KB Article:
http://support.microsoft.com/kb/896861
In Registry Editor, locate and then click the following registry key:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Lsa\MSV1_0
Right-click MSV1_0, point to New, and then click Multi-String Value.
Type BackConnectionHostNames, and then press ENTER.
Right-click BackConnectionHostNames, and then click Modify.
In the Value data box, type the host name or the host names for the sites that are on the local computer, and then click OK.

Install Windows with Windows Deployment - Driver is not signed - Pavilion 500-503ns

Similar Messages

Maybe you are looking for