Install Windows XP 64-bit on Boot Camp.

Can I install Windows XP 64-bit on Boot Camp (Tiger)? Where can i find all the driver for 64-bit? Thank you.

Hi Amen,
XP 64-bit was never supported by Apple.
Therefor you are left to find the needed drivers all by yourself and for Apple-specific hardware you won't find any drivers at all.
Use the System Profiler in OS X to determine what hardware is in your Mac and then go to the websites for these hardware manufacturers to see/find drivers for XP 64-bit.
Personally I am not sure if all this hassle is worth the outcome.
Regards
Stefan

Similar Messages

Cannot install Windows 7 32-bit using Boot Camp

I have one of the new iMacs (late 2012) and I can't install Windows 7 32-bit using Boot Camp. Whenever I try to being the installation using the Boot Camp Assistant, I always get the following message: "Need 64-bit Windows installation USB drive or DVD. Boot Camp only supports 64-bit Windows installation on this platform. Please use an USB drive or DVD which contains 64-bit Windows". I have successfully installed 32-bit Windows on my Macbook Pro that is running the same version of Mac OS X and Boot Camp, but I don't know why on this new iMac it doesn't allow me to. Apple's documentation states that I should be able to install either 32-bit and 64-bit without any problem, but this is not the case here. I can't find anything about this problem/error on the Internet either. HELP!!!

AidenT wrote:
Yes, circumstances do change but if Apple is, as they claim to be, serious about seamlessly migrating what is still a large and dominant market share of users from Windows, supporting 32 bit versions is not a nice to have, but a must have.
I don't see why users have to make excuses when there is a clear shortfall of what is promised.
In other discussions, there is talk of an opportunity for Apple to make a significant impact, as Windows 8 has deviated so much from the comfort zone of traditional Windows users. But to make that change, Macs have to support what is still a primarily 32 bit environment in the installed base.
As for the use of VMs, I had a tough time migrating out of Parallels 6 after an upgrade to Mountain Lion broke compatibility so IMHO it is not a long term solution unless you are happy to hand out $50 every 2-3 years just to support the same functionality.
Use Virtual Box, it's free.
32 bit may have a reasonable user base but it's going away fast, if you must use 32 bit Windows and won't use a VM your choice is limited.
Buy a PC, or buy an older Mac.
The rest of your post is speculative and I won't go there.

I have an iMac with mountain lion 10.8.3 with boot camp 5.0.2 .i installed windows 7 -64 bit with boot camp but the boot camp didn't install drivers for windows please guide me for trouble shooting .

i have an iMac with mountain lion 10.8.3 with boot camp 5.0.2 .i installed windows 7 -64 bit with boot camp but the boot camp didn't install drivers for windows please guide me for trouble shooting .

Kappy wrote:
Boot Camp doesn't install the drivers. You have the drivers on a separate USB device if you followed directions. Once in Windows connect the USB drive with the driver software. It should startup automatically and install the drivers.
You don't even need to do that. As downloading the drivers from within Boot Camp Assistant can be unreliable, it is better to get the package directly from here:
http://support.apple.com/kb/DL1638
Copy the .zip file to a USB flash drive or burn it to a DVD in OS X. Install Windows as normal, insert the flash drive/DVD in Windows, copy the .zip file to the hard drive, extract it, then run the setup executable.

Install windows 7 32-bit using boot-camp on snow-leopard

I have Snow-Leopard running on my MacBook. I want to install Windows 7 32-bit Professional. I have already purchased copy of Windows from Amazon. I never'ed install Windows on my MacBook till date, so I don't know what to do, and how to install it.
Please share your experiences of installing Windows using Boot-Camp. I need screen-shots or video that can help me with installation.

Windows 7 requires Mac OS X v10.6 Snow Leopard and the Boot Camp 3.1 Update. For complete system requirements information, see http://support.apple.com/kb/HT1899
The 3.1 update is here http://support.apple.com/kb/DL996
The 3.2 update is here http://support.apple.com/kb/DL1333
Here's a couple of sites that helped me when I used Boot Camp to install Windows XP.
http://manuals.info.apple.com/en_US/Boot_Camp_Install-Setup.pdf
http://www.askdavetaylor.com/how_do_i_install_windows_xp_on_my_mac_using_boot_ca mp_1.html

Installing Windows 7 64 bit using boot camp w/ an OEM disk?

Has anyone made a successful attempt at installing Windows 7 from an OEM disk under Boot Camp?? I'm also noticing that it seems to be the trend of now going to Microsoft's website with an authorization code to download the OS!! I can only assume that this is some sort of ISO image that can be burned to a DVD after downloading, does anyone know?? I'll cut to the chase here!!! I'm looking to avoid spending $300.00 for the full retail disk of Windows 7..lets be series!!
Thanks

Comp Usa is selling an OEM copy of Windows 7 64 bit for $149.99. When I called to verify the price they told me that this was a download only, not a disk. They said they give you some sort of authorization number & you then go to a Microsoft download site & download the software. When I asked them what kind of format the download came in i.e. an ISO image which could be then burned onto a DVD they couldn't tell me, but said they would try and find out for me. That sounds like trouble to me!!! If I go & purchase this version, & for some reason Boot Camp won't install from it will have wasted $149.99!!! On the other hand, I didn't exactly want to pay full retail of $299.00 for the retail disk!!!! I'm trying to get out the cheap way of course!!! Has anyone out there successfully installed doing it the OEM way???
Thanks

Windows 7 64-bit with Boot Camp 5: keyboard & mouse don't work

Running OS-X 10.8.5 on iMac 27 Late 2013. Everything goes smoothly installing Windows 7 64-bit with Boot Camp 5.0.4 until Windows does its final reboot (after a complete, apparently successful install), and begins the Windows setup sequence. The first setup screen asks for User name and PC name. My mouse and keyboard do not work at this point. Tried cold rebooting: Windows boots up, detects it needs to do first use setup, and gets to same failure point.
NOTE: I have never had a chance to install the Windows support drivers; but the mouse and keyboard worked through out the istallation.
I've tried two different W7 versions: 64-bit Pro and 64-bit Enterprise [Enterprise is not supported, but I have installed it on an iMac 27 2010, and a MacBook Air 2013.]. Both versions of W7 hang at the same point described above.
I've tried a Windows DVD install disk plus Windows support drivers on a flash drive; and I've tried a bootable flash drive with everything on it. Both fail at the same point.
I have tried both wireless and USB keyboards and mouse. Same failure.
I have even tried removing the flash drive with Windows support drivers before the final reboot. Same failure.
NOTE: when I reboot in OS-X and go to the Startup Disk, the windows option says "Untitled Windows" instead of Boot Camp; but I can select it, and it starts the Windows boot which ends up at the same Windows setup failure point.
Has anyone had the same problem?
Has anyone succeeded? If so, any special actions or ideas?

The issue may be related to the iMac 2013 only having USB 3.0 ports and that windows 7 does not come with drivers for it. Try the following (borrowed from answer on Mac Rumors Forums http://forums.macrumors.com/showthread.php?t=1659481):
<quote>
If you run into issues with keyboard and mouse not working (due to USB 3.0 and Win 7 incompatibility), you need to run your Win 7 partition (and Win 7 installation disk/partition) in legacy mode. (I found this information at:http://twocanoes.com/winclone/support#faq123 - see "Method using Terminal"). Here you will be setting the legacy on the installation volume of win 7, not bootcamp partition (yet). After running the diskutil list find the volume with installer of Win 7, and then run the command (substituting the disk1s2 below with the information you find through diskutil on your computer:
sudo /usr/sbin/bless --device /dev/disk1s2 --setBoot --nextonly --legacy
Enter administrative password when prompted. Next, select Restart from the Apple menu. Do not hold the Option key while restarting.
You should have mouse/keyboard working. Begin the Windows 7 installation. Upon first restart right after the installer completes, boot into Mac and set the legacy mode for the BootCamp partition (but this time without the --nextonly flag), so you can use keyboard/mouse to complete the installation and thereafter until the USB 3.0 drivers are installed).
</quote>

Crysis Warhead 64-bit Won't Work with Windows 7 64-bit Under Boot Camp

Hi. I installed the patch 1.1 for Crysis Warhead which has the 64-bit version of the game which I'm running under Windows 7 64-bit on Boot Camp and I've tried the the compatibility mode (Vista to Vista SP2). I've also updated the ATI drivers as well as the Boot Camp drivers. I'm using the latest Snow Leopard.
When I click on the game's application (64-bit version), it would launch then it goes black with just the mouse cursor (you can move it about) which seems to be in low resolution and I guess it would crash so I would push the button on this late iMac 2009 and Windows would go back to the desktop then shutdown.
Has anyone made Crysis Warhead 64-bit work with Boot Camp Win7 64-bit with this iMac (it has the ATI 4850)? Is this because it's Boot Camp or that it's Windows 64-bit or is it the ATI graphics chip? Thank you in advance. Gbu.
Message was edited by: Alvin777

since bootcamp allows windows to run natively, it's not an imac issue, but rather an issue with your windows, so you probably get better answers in a windows forum or the crysis forums.
in any case, installing newer ATI drivers (ati.com) might help, but it's just a wild guess

If I install Windows on my Mac using Boot Camp, will I be able to use a Windows Keyboard instead of the Keyboard that came with my Mac?

If I install Windows on my Mac using Boot Camp, will I be able to use a Windows Keyboard instead of the Keyboard that came with my Mac?

yeah I use a windows keyboard both in OS X and in windows on my imac I pref the split ms type of keyboard over the tiny apple keyboard and I pref the razor mouse so those are my main input sources in both yosemite and windows8.1

HT5628 i was installing windows 8 on mac by boot camp and after i put the windows code and choose the partition i formatted the boot camp sector it said windows can not install on this sector because it is gpt

i was installing windows 8 on mac by boot camp and after i put the windows code and choose the partition i formatted the boot camp sector it said windows can not install on this sector because it is gpt

Reinstalling Mavericks depends on several factors:
if you erased your recovery partition
what OS originally came on your Mac.
I'll assume you don't have a backup available that you made before your mishap, because you didn't mention it.
That's really the take home message here: have a backup!
If you still have your recovery partition:
boot into the recovery partition (command R at restart)
use the recovery partition to reinstall Mavericks. see: OS X: About OS X Recovery
if you do not still have your recovery partition, then it depends on whether your Mac originally came with installer disks or not.
If it originally came with installer disks, you would boot from the installer disks, erase your HD, and then reinstall the OS that is on the installer disks, and then upgrade as necessary until you get to Mavericks.
If your mac did not originally come with installer disks, but you managed to erase your recovery partition, then you can try to boot into internet recovery (option-command-R at restart), and use internet recovery to erase your HD and reinstall the OS that originally came with your computer, and then upgrade to Mavericks if you need to. See: Hands on with Mountain Lion's OS X Recovery and Internet Recovery | Macworld
(the reference refers to ML but it applies just as well to Mavericks).

Can I install Windows on my Mac without Boot Camp Assistant?

I was wondering if this was possible, or does Boot Camp Assistant format the hard drive in such a way that makes it possible for Windows to be installed, or can I just create a new partition myself and format it and install Windows without having to touch Boot Camp Assistant?

Windows on Intel Macs
There are presently several alternatives for running Windows on Intel Macs.
1. Install the Apple Boot Camp software. Purchase Windows XP w/Service Pak2, Vista, or Windows 7. Follow instructions in the Boot Camp documentation on installation of Boot Camp, creating Driver CD, and installing Windows. Boot Camp enables you to boot the computer into OS X or Windows.
2. Parallels Desktop for Mac and Windows XP, Vista Business, Vista Ultimate, or Windows 7. Parallels is software virtualization that enables running Windows concurrently with OS X.
3. VM Fusionand Windows XP, Vista Business, Vista Ultimate, or Windows 7. VM Fusion is software virtualization that enables running Windows concurrently with OS X.
4. CrossOver which enables running many Windows applications without having to install Windows. The Windows applications can run concurrently with OS X.
5. VirtualBox is a new Open Source freeware virtual machine such as VM Fusion and Parallels that was developed by Solaris. It is not as fully developed for the Mac as Parallels and VM Fusion.
Note that Parallels and VM Fusion can also run other operating systems such as Linux, Unix, OS/2, Solaris, etc. There are performance differences between dual-boot systems and virtualization. The latter tend to be a little slower (not much) and do not provide the video performance of the dual-boot system. See MacTech.com's Virtualization Benchmarking for comparisons of Boot Camp, Parallels, and VM Fusion. Boot Camp is only available with Leopard or Snow Leopard. Except for Crossover and a couple of similar alternatives like DarWine you must have a valid installer disc for Windows.
You must also have an internal optical drive for installing Windows. Windows cannot be installed from an external optical drive.

Need Working Drivers for Macbook 2,1 running Windows 8 (64-bit) using Boot Camp 5 (Mountain Lion)

So I found my old Macbook 2,1 on Leopard the other day and decided to make it my dedicated Windows computer. I wanted to run Windows 8 on it, so I figured out I needed Boot Camp 5. Then I realized Boot Camp 5 only runs on Mountain Lion, so I went though the process up updating it (had to use MLPostFactor since it's techincally unsupported on my mac.) After getting it updated to Mountain Lion, I went and used Boot Camp 5 to install Windows 8 64-bit. However, when I try to load any Boot Camp Driver Files (I've tried the drivers for BootCamp 3, 4, and 5) it says it is unsupported on my computer model. I suspect this is because of the fact that Windows 8 shouldn't be on my computer. Without these files, I can't right click, among other things, which is pretty important. Can anyone help me get these drivers loaded?

According to the Boot Camp System Requirements located here: http://support.apple.com/kb/HT5634
Your Macbook 2008 does not support Windows 8.
Mac model
Windows 8
64-bit
Windows 7
64-bit
Windows 7
32-bit
Windows Vista
64-bit
Windows Vista
32-bit
Windows XP
32-bit
MacBook (13-inch, Mid 2010)
4
4
DVD
DVD
DVD
MacBook (13-inch, Late 2009)
4
4
DVD
DVD
DVD
MacBook (13-inch, Mid 2009)
4
DVD
DVD
MacBook (13-inch, Early 2009)
4
DVD
DVD
MacBook (13-inch, Aluminum, Late 2008)
4
DVD
DVD
MacBook (13-inch, Early 2008)
4
DVD
DVD
MacBook (13-inch, Late 2007)
4
DVD
DVD
MacBook (13-inch, Mid 2007)
4
DVD
DVD
MacBook (13-inch, Late 2006)
4
DVD
DVD
MacBook (13-inch, Mid 2006)
4
DVD
DVD

Cannot get Magic Mouse to work in Windows 7 64-bit using Boot Camp

I recently purchased a Magic Mouse and installed it on the Mac OS X partition of my MacBook Pro. After successfully installing on the Mac side, I switched to Windows 7 Ultimate 64-bit using Boot Camp to install on the Windows partition. When I try to "Discover" a new Bluetooth device, the Magic Mouse does not show up in the list of devices (the mouse is powered on and next to the computer).
I am using the most recent version of Boot Camp (3.0.2) and have updated Windows 7. Has anyone else experienced this problem? If so, is there a fix for it?
I appreciate any help!

OK, that is a Bluetooth mouse so open Windows Devices and Printers>Add a Device Toggle the power (on the mouse) off and then on. he mouse should appear in the window, follow instructions to add it.

Install Windows XP in Leopard WITHOUT Boot Camp - No More Disk Error

For those of you having problems installing Windows XP in Boot Camp because of the formatting screen never showing up and then the system restarting with the dreaded:
Press any key to boot from CD .....
Disk Error
Press any key to restart
I too spent many frustrating hours trying to find a solution that worked. I searched these threads, tried many of the solutions suggested here and elsewhere, including recreating the Windows CD without a specific file, using the FreeDOS boot CD (couldn't ever get it to work, though I understand some people have had success), Reinstalling Leopard and trying again, dancing around the laptop with incense three times counter clockwise while chanting the name of my childhood pet... etc.
I FOUND A NEW SOLUTION!!!! A much easier solution!!!!
For anyone who is having this problem and is planning to run virtualization software.
(Something that let's you run Windows from inside Leopard)
SKIP BOOT CAMP ALTOGETHER!!!
USE VMware Fusion to install Windows.
I decided to try a different approach entirely and did a completely fresh install of Leopard (not sure if that was necessary or not but with everything else I had been trying I wanted to clean it up anyhow) and then installed the 30 day trial version of Fusion w/ the unlock key VMware emailed me.
I entered my information and Windows product key into Fusion's "Easy Install" Interface, clicked install, and about 30 minutes later I was browsing around in XP.
I HIGHLY recommend this option for anyone having difficulty with the formatting screen not showing up. I have a Bachelors Degree in Information Systems and still spent the better part of 2 days working on this boot camp problem, including numerous hours with the higher tier of apple's tech support. I suspect that those of us having this problem may have an OEM or systembuilder copy of XP... but that is for Apple to deal with - not me, I have better things to do with my time.
If you are planning to run Windows from within Leopard anyhow, just buy Fusion and to **** with the hassle.
You can go to VMware's website and get a 30 day evaluation copy to see if this will work for you before you decide if you want to purchase it, they will email you the unlock key.
Best of luck, hope this saves someone some time!

For what it's worth, I've used the OEM version (copper disk), Select version (bulk license), and an NFR (partner program) version of XP Pro with SP2 and they all worked. On my MacBook Pro's I use boot camp to split the disk in two, reboot using the Windows CD, and pick the partition to format it.
Apple states that you need a full version of Windows, and the OEM versions are slightly different from the commercial versions, but both should work. On my Mac Pro, I created a 3-disk OS X RAID-0, and left the 4th disk alone. I rebooted with the Windows CD and installed Windows to the 4th disk without Bootcamp at all. Once Windows was installed, I used the Leopard disk to install the Bootcamp drivers. The Mac side has no Bootcamp installation but I can still choose between the volumes by holding down the option key at boot time or by setting the startup volume in the OS X Startup disk preference pane.
The solution to use virtualization, unfortunately, will not work for many situations where graphics are involved. Most current major products, such as AutoCAD, 3dsMax, and so forth, will not run properly or at all without specific DirectX 9 or OpenGL support. To date both Parallels and VMWare do not completely support DirectX or OpenGL.

Please Help! Problems with Windows Vista 32-bit on Boot Camp (Wireless/Etc)

We recently purchased a new aluminum Mac Book (13 inch) with Leopard (10.5.4). I attempted to install Boot Camp and Windows Vista 32-bit. I can successfully alternate between both operating systems with no problems. However, I am having 2 problems:
1) I cannot connect to wireless internet. No connections will even show up when I attempt to connect, its almost as if an adapter hasn't been installed.
2) I cannot set up the trackpad to do right click.
I've read articles everywhere and nothing has helped. Can anybody please help me??? Any support/advice is greatly appreciated. Thanks in advance!
- Pierce

dpierceNKC:
Welcome to the Apple discussions.
It appears that you may not have installed the boot camp drivers. Boot into Windows and insert your Leopard installation disk in the CD/DVD drive. This should automatically begin installation of the necessary drivers. Reboot the computer when instructed and all the hardware should work as designed.
The right click is accomplished by placing two fingers on the trackpad and then depressing the trackpad button. This should also work after the drivers are installed as instructed above.
Axel F.

Can install Windows 7 Pro, but not Boot Camp drivers

I have used Boot Camp assistant to install Windows 7 Pro (64 bit), and built the USB drive with Boot Camp drivers.
Installed on a separate drive on my Mac Pro.
When I install the drivers and reboot, I get an error. Basically Windows says there is an error and it needs to run System Restore in order to roll back to the previous status (ie. remove Boot Camp drivers).
I am using the latest Boot Camp drivers for a Mac Pro (4,1) and 64 bit Windows.
I tried downloading the drivers from Apple's website in Windows, unzipped and installed - same issue.
Windows is not yet registered.... (might that be an issue?)
Grateful for some ideas. I have previously had Win7 running on this machine, and even Win 8 (which crashed - necessitating a roll back to Win 7 whcih is nicer).
TIA

the drivers have a root setup.exe if people have problems with that they can manually navigate to the sub dirs and run the driver installs for the various hardware manually
the various driver exe install will only install if they detect the hardware is there so it's safe to run installers for say a video card ones computer does not have
and if one of the driver don't work of the hardware related to it is defect in some way you can identify which one as the restore would happen right over that driver install
that windows is not registered should not play apart as far as I know

Install Windows XP 64-bit on Boot Camp.

Similar Messages

Maybe you are looking for