Install with database in place or not?
Probably not the most difficult question, but I haven't found anything that says one way or another: should there be an Oracle database instance already on the machine I'm installing EBS 12.1 on, or will the EBS install create one?
Thanks,
Paul
Hi,
But if the database tier and application tier is going to reside on different nodes then the database part of the install should run first on the database server then the application. Am i correct?Correct, and this is called multi-node installation (i.e. you run Rapid Install on the database tier first, then you run Rapid Install on the application tier node after copying the configuration file) -- Please see the installation manual for details.
Regards,
Hussein
Similar Messages
-
Lion 10.7 clean install with Outlook 2011 mail search not working
Installed fresh copy of lion on my macbook pro 6,2. Then installed office 2011 and did all the patches. After the macbook pro finished its indexing I started to use my outlook 2011 email and noticed that email search did not work. (Outlook 2011 14.1.2 / Lion 10.7)
I fixed it by forcing another index:
sudo mdutil -E /
sudo mdutil -i on /
Now email search works.
CheersI've had this problem since Tiger. Various solutions have been posted, but none have worked for me. It really cripples Mail--I've used emails as my personal database for years, kind of a history log, which worked great in Eudora but Eudora isn't being supported anymore.
After updating to X.5.5, I can search "entire message" for "All Mailboxes" and find everything including emails in the mailbox I was viewing (often finds 60,000 occurences, but doesn't take very long--it's just incredibly tedious to find the one I want from such an enormous set of results). I can also find everything using Spotlight, outside of Mail. But if I am looking at any mailbox, like Inbox, search "entire message" never finds anything at all. Searching for subjects etc works fine. -
Installed Oracle database express edition but not can't access c: drive
I downloaded and installed oracle 10g express edition (universal) on my windows 7 64bit computer and went through the set up but I changed the default installed path to just c: drive (thinking it would create a folder by itself). After finishing the installation, my c: drive shows zero gb. When I try to open my c: drive I get a message saying "c:\ is not accessible. Access denied." All my files are there as i used folder shortcuts to access them. I tried uninstalling oracle but hit an error saying:
"This installation package could not be opened. Verify that the package exists and that you can access it, or contact the application vendor to verify that this is valid Windows installer package."
I can't install any programs or save/copy to any folder in my c: drive but I can save/copy to desktop.
Please help by any means, thanks.
Edited by: 796973 on Sep 23, 2010 9:19 PM796973 wrote:
Please help by any means, thanks.
This happens when you don't follow the installation guide and think you are smarter then the software.
When the installer warned you that the installation path you were choosing was not empty and asked you if you wanted to install anyway...You answered YES!
Now you lost you drive c: file system.
Tough luck!
:p -
Adobe PDF IFilter doesn't install with Adobe X (10)
Am I missing something or Adobe X Reader doesn't install any pdf filters at all. I searched even with IFilter Explorer 2.0 and I can't find any in this latest version. Can someone help me with any information regarding this isue, does Adobe uses some other system or I just installed it wrong?
Thank you.According to this page, "The iFilter shell extension has a limitation with Microsoft Desktop Search and is not installed with Reader X." I'm not sure what "has a limitation with" is supposed to mean.
Adobe has really left us up the creek without a paddle here. They stopped posting separate IFIlter installers on their download page when they started bundling it in with Reader (except for the 64-bit version of IFilter 9), and the installer for Reader X not only doesn't include the IFilter, but it actually removes whatever IFilter you've got installed. So, you can't, for example, install Reader 9.4 to get the IFilter from it, and then install Reader X over top of it to have a more modern/secure version of Reader, because your IFilter will disappear. You are stuck choosing between Reader 9.4 with a somewhat modern IFilter and probably poor security, or Reader X with no IFilter (or the last IFilter to have its own installer, version 6.0, which is 6 years old).
Dear Adobe, this is a real mess that needs to be fixed. How many people out there have no idea that their PDF files are no longer searchable because Reader X removed their IFilter? At least create an installer for IFilter v9.4 so people can use a modern IFilter in combination with Reader X, instead of being forced to use Reader 9.4. There are a lot of posts in this forum about the missing IFilter, and I don't see a single reply from Adobe. -
Safari installed with Snow Leopard stalls, slow typing, generally awful
What is the deal with this?
I just did a clean install of snow leopard, to test this. Safari 4.0.3 as installed with snow leopard simply will not open 25% or more of the pages I try to go to, giving a consistent "Safari can't find the server" message. I click on a link, safari hangs for minutes on end and says it can't find the server. I open the same pages with FF and they open immediately. Safari 4.0.3 on OS X 10.5.8 (which I've reverted to because the snow leopard update is SO awful and buggy) worked great. Now it barely works at all.
What happened to Apple? Why did they release an obviously beta-level update to their OS, when the previous version was itself so weak?Greetings,
Safari 4.0.3 is not a beta release; the fact that you're having a problem indicates there's a problem on your system. Try these steps to see if they will resolve the issue:
Quit Safari if it's running and open System Preferences>Network>Advanced.
In the DNS Server tab, make sure IPv6 is turned off, and enter these two DNS servers to replace the ones you currently have:
208.67.222.222
208.67.220.220
click Apply Now and quit System Preferences.
Next, do these things in order:
1. Go to Home/Library/Cookies and delete the Cookies.plist file.
2. Go to Home/Library/Caches/com.apple.Safari and delete the contents of that folder.
3. Go to Home/Library/Caches/com.apple.Safari/Web Page Previews and delete the contents of that folder.
4. If you don't want to use the Top Sites feature, open Terminal and paste in this command:
defaults write com.apple.Safari DebugSnapshotsUpdatePolicy -int 2
then press Enter and quit Terminal when you see the command prompt again.
5. Go to Home/Library/Caches/Metadata/Safari and delete the contents of that folder.
6. Go to Home/Library/Caches/Safari and delete the contents of that folder.
7. Go to Home/Library/Safari and delete these files (if you have them):
Downloads.plist
History.plist
Form Values
LastSession.plist
WebpageIcons.db
Then Repair Disk Permissions, restart Safari and see if the speed is improved. -
Not able to install rtcxds database with Lync Standard Edition
Hello everybody,
I'm trying to install Lync 2013 Standard in an lab environment. After publishing my topology i try to
install the database from the topology builder and everything works fine, but the rtcxds database times out.
It says that the database does not exist and will be created but it fails then with a timeout. The other
databases are created successfully. A 4gb file is in the expected folder, which gets deleted when the timeout appears.
I got 4 services on my server that won't start (SQL Server-Agent RTC & SQL Server-Agent LYNCLOCAL & SQL Server-Agent RTCLOCAL & Lync Server XMPP-Übersetzungsgateway)
Log-File:
****DbSetupInstance für 'Microsoft.Rtc.Common.Data.BlobStore' wird erstellt****
"DbSetupBase" wird initialisiert.
Analyseparameter...
Gefundener Parameter: SqlServer Wert lync01.lynctest.local\rtc.
Gefundener Parameter: SqlFilePath Wert C:\Program Files\Common Files\Microsoft Lync Server 2013\DbSetup.
Gefundener Parameter: Publisheracct Wert LYNCTEST\RTCHSUniversalServices;RTC Server Local Group;RTC Local Administrators;LYNCTEST\RTCUniversalServerAdmins.
Gefundener Parameter: Replicatoracct Wert LYNCTEST\RTCHSUniversalServices;RTC Server Local Group.
Gefundener Parameter: Consumeracct Wert LYNCTEST\RTCHSUniversalServices;RTC Server Local Group;RTC Local Read-only Administrators;LYNCTEST\RTCUniversalReadOnlyAdmins.
Gefundener Parameter: DbPath Wert e:\csdata\BackendStore\rtc\DbPath.
Gefundener Parameter: LogPath Wert f:\cslog\BackendStore\rtc\LogPath.
Gefundener Parameter: Role Wert master.
Versuch, eine Verbindung mit SQL Server "lync01.lynctest.local\rtc" herzustellen. mit Windows-Authentifizierung...
SQL-Version: Hauptversion: 11, Unterversion: 0, Build 5058.
Die SQL-Version ist akzeptabel.
Parameter werden überprüft...
DbName rtcxds überprüft.
SqlFilePath C:\Program Files\Common Files\Microsoft Lync Server 2013\DbSetup überprüft.
DbFileBase rtcxds überprüft.
DbPath e:\csdata\BackendStore\rtc\DbPath überprüft.
Wirksamer Datenbankpfad: \\lync01.lynctest.local\e$\csdata\BackendStore\rtc\DbPath.
LogPath f:\cslog\BackendStore\rtc\LogPath überprüft.
Wirksamer Protokollpfad: \\lync01.lynctest.local\f$\cslog\BackendStore\rtc\LogPath.
Der Status für Datenbank "rtcxds" wird überprüft.
Der Status für Datenbank "rtcxds" wird überprüft.
Der Status der Datenbank "rtcxds" ist getrennt.
Die Datenbank "rtcxds" wird von Datenpfad "\\lync01.lynctest.local\e$\csdata\BackendStore\rtc\DbPath" und Protokollpfad "\\lync01.lynctest.local\f$\cslog\BackendStore\rtc\LogPath" angefügt.
Fehler des Vorgangs, weil die Datei "\\lync01.lynctest.local\e$\csdata\BackendStore\rtc\DbPath\rtcxds.mdf" fehlt.
Fehler beim Anfügen der Datenbank, da eine der Dateien nicht gefunden wurde. Die Datenbank wird erstellt.
Der Status der Datenbank "rtcxds" ist "DbState_DoesNotExist".
Die Datenbank "rtcxds" wird von Grund auf neu erstellt. Pfad der Datendatei = e:\csdata\BackendStore\rtc\DbPath, Pfad der Protokolldatei = f:\cslog\BackendStore\rtc\LogPath.
Die Installationsdatenbank "rtcxds" wird bereinigt.
Timeout abgelaufen. Das Zeitlimit wurde vor dem Beenden des Vorgangs überschritten oder der Server reagiert nicht.
****DbSetupInstance für 'Microsoft.Rtc.Common.Data.RtcSharedDatabase' wird erstellt****
"DbSetupBase" wird initialisiert.
Analyseparameter...
Gefundener Parameter: SqlServer Wert lync01.lynctest.local\rtc.
Gefundener Parameter: SqlFilePath Wert C:\Program Files\Common Files\Microsoft Lync Server 2013\DbSetup.
Gefundener Parameter: Serveracct Wert LYNCTEST\RTCHSUniversalServices;RTC Server Local Group.
Gefundener Parameter: DbPath Wert e:\csdata\BackendStore\rtc\DbPath.
Gefundener Parameter: LogPath Wert f:\cslog\BackendStore\rtc\LogPath.
Versuch, eine Verbindung mit SQL Server "lync01.lynctest.local\rtc" herzustellen. mit Windows-Authentifizierung...
SQL-Version: Hauptversion: 11, Unterversion: 0, Build 5058.
Die SQL-Version ist akzeptabel.
Parameter werden überprüft...
DbName rtcshared überprüft.
SqlFilePath C:\Program Files\Common Files\Microsoft Lync Server 2013\DbSetup überprüft.
DbFileBase rtcshared überprüft.
DbPath e:\csdata\BackendStore\rtc\DbPath überprüft.
Wirksamer Datenbankpfad: \\lync01.lynctest.local\e$\csdata\BackendStore\rtc\DbPath.
LogPath f:\cslog\BackendStore\rtc\LogPath überprüft.
Wirksamer Protokollpfad: \\lync01.lynctest.local\f$\cslog\BackendStore\rtc\LogPath.
Der Status für Datenbank "rtcshared" wird überprüft.
Die Datenbankversion für Datenbank "rtcshared" wird gelesen.
Datenbankversion für Datenbank "rtcshared" – Schemaversion 5, Version der gespeicherten Prozedur 0, Updateversion 1.
Does anyone have an idea, what causes this timeout/error?
Thanks in Advance!
Kind regards,
FabioDatei "\\lync01.lynctest.local\e$\csdata\BackendStore\rtc\DbPath\rtcxds.mdf" fehlt.
Fehler beim Anfügen der Datenbank, da eine der Dateien nicht gefunden wurde. Die Datenbank wird erstellt.
It looks like it can't find that file. Do you see it on your drive?
If you run Topology Builder, will it let you download the topology from the Central Management store and publish a tiny change at the moment?
Do you get the same error if you rerun step 2?
To confirm, this is your first Lync server in the environment?
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question please click "Mark As Answer".
SWC Unified Communications -
Error in installing Database Control with Database Creation Assistant
I'm trying to install the Database Control on Win2003 with the Database Creation Assistant. I get the following error. D:\oracle\product\10.2.0\admin\ECOMDB\pfile\init.ora (The system cannot find the path specified).
Our init.ora file is not in that path and our file is named initECOMDB.ora. How do I tell DBCA the correct path and file name to use?
By the way I'm a unix guy and this is the first time I've done Oracle on Windows. The database had been created by someone else and the files are sort of slung all over the place.
Replies appreciated.
KirkOpen initECOMDB.ora, it may be calling D:\oracle\product\10.2.0\admin\ECOMDB\pfile\init.ora which does not exist. Change it to the correct directory or remove it if all the required parameters are already in initECOMDB.ora. The line to look for is ifile
BTW - if your database has already been created, you can create its database control from the command line:
emca -config dbcontrol db -repos create -
I want to add another management server to our existing SCOM environment. But whenever I run this setup on a new server I get stuck in the window for selecting the OperationsManager database. The database field stays blank and in the OpsMgrSetupWizard log
there are lines that the setup version is not compatible with the database version. But I use the same installer as when I installed the other management servers a year ago.
Maybe there is a newer setup installer? But I can't find it.
[10:42:54]: Error:
:Error:setup version: 7.0.9538.0 is not compatible with database version: 7.1.10226.0
[10:42:54]: Info:
:Info:Using DB command timeout = 1800 seconds.
[10:42:54]: Info:
:Info:isOMDatabase: Read returned true. so far, this is OM DB, not an empty DB
[10:42:54]: Debug:
:Connection was not open. We will try to open it.
[10:42:54]: Debug:
:SqlConnectionReady returned True.
[10:42:54]: Info:
:Info:Using DB command timeout = 1800 seconds.
[10:42:54]: Info:
:Info:isOMDatabase: Read did not return true. The MG is missing. This is not OM DB
[10:42:54]: Info:
:Info:Using DB command timeout = 1800 seconds.
[10:42:54]: Always:
:Azman store table not found in OperationsManagerDW table, assuming this is an not a valid OMDB for empty DB scenario.
[10:42:54]: Info:
:Info:DatabaseConfigurationPage: DB connection attempt completed.
[10:42:54]: Info:
:Info:DatabaseConfigurationPage: DB connection attempt completed.Never mind, found it!
Apparently there was a newer version of SCOM setup in msdn and someone upgraded our existing SCOM environment. Downloaded the new setup, new report viewer controls and a System
CLR Types for Microsoft® SQL Server® 2012 and now it works!! -
SQL Server 2012 DB Engine does not start (clean install with server 2012 and 2008 R2)
I'm trying to do clean installation of SQL server 2012 on Server 2012 (which is runnning as a VM on ESX server) and getting this "wait on the DB engine recovery failed" message. Initially, I though this issue was related to some permission issues
but changing the permission or service accounts didn't help. I'm not seeing any "denied" messages in the log files either. Even with Server 2008 R2 (clean built VM), the installation gives the exactly the same error messages.
My setup is purely for test purpose; so, the security is not a concern. Can someone help or give me a clue where to look?
(Summary)
Overall summary:
Final result: Failed: see details below
Exit code (Decimal): -2061893606
Start time: 2014-05-28 17:12:12
End time: 2014-05-28 17:19:47
Requested action: Install
Setup completed with required actions for features.
Troubleshooting information for those features:
Next step for SQLEngine: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Machine Properties:
Machine name: WIN-1V3VKPV5Q19
Machine processor count: 1
OS version: Future Windows Version
OS service pack:
OS region: United States
OS language: English (United States)
OS architecture: x64
Process architecture: 64 Bit
OS clustered: No
Product features discovered:
Product Instance Instance ID Feature
Language Edition Version Clustered
Package properties:
Description: Microsoft SQL Server 2012 Service Pack 1
ProductName: SQL Server 2012
Type: RTM
Version: 11
Installation location: E:\x64\setup\
Installation edition: Evaluation
Slipstream: True
SP Level 1
Patch Level: 11.1.3128.0
Product Update Status:
Success: KB 2674319, KB 2793634
Product Updates Selected for Installation:
Title: Service Pack 1
Knowledge Based Article: KB 2674319
Version: 11.1.3000.0
Architecture: x64
Language: 1033
Title: SQL Server 2012 SP1 GDR Product Update
Knowledge Based Article: KB 2793634
Version: 11.1.3128.0
Architecture: x64
Language: All
Update Source: MU
User Input Settings:
ACTION: Install
ADDCURRENTUSERASSQLADMIN: false
AGTSVCACCOUNT: NT Service\SQLAgent$TESTDB
AGTSVCPASSWORD: *****
AGTSVCSTARTUPTYPE: Manual
ASBACKUPDIR: Backup
ASCOLLATION: Latin1_General_CI_AS
ASCONFIGDIR: Config
ASDATADIR: Data
ASLOGDIR: Log
ASPROVIDERMSOLAP: 1
ASSERVERMODE: MULTIDIMENSIONAL
ASSVCACCOUNT: <empty>
ASSVCPASSWORD: <empty>
ASSVCSTARTUPTYPE: Automatic
ASSYSADMINACCOUNTS: <empty>
ASTEMPDIR: Temp
BROWSERSVCSTARTUPTYPE: Automatic
CLTCTLRNAME: <empty>
CLTRESULTDIR: <empty>
CLTSTARTUPTYPE: 0
CLTSVCACCOUNT: <empty>
CLTSVCPASSWORD: <empty>
CLTWORKINGDIR: <empty>
COMMFABRICENCRYPTION: 0
COMMFABRICNETWORKLEVEL: 0
COMMFABRICPORT: 0
CONFIGURATIONFILE: C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20140528_170909\ConfigurationFile.ini
CTLRSTARTUPTYPE: 0
CTLRSVCACCOUNT: <empty>
CTLRSVCPASSWORD: <empty>
CTLRUSERS: <empty>
ENABLERANU: false
ENU: true
ERRORREPORTING: false
FEATURES: SQLENGINE
FILESTREAMLEVEL: 0
FILESTREAMSHARENAME: <empty>
FTSVCACCOUNT: <empty>
FTSVCPASSWORD: <empty>
HELP: false
IACCEPTSQLSERVERLICENSETERMS: true
INDICATEPROGRESS: false
INSTALLSHAREDDIR: C:\Program Files\Microsoft SQL Server\
INSTALLSHAREDWOWDIR: C:\Program Files (x86)\Microsoft SQL Server\
INSTALLSQLDATADIR: <empty>
INSTANCEDIR: C:\Program Files\Microsoft SQL Server\
INSTANCEID: TESTDB
INSTANCENAME: TESTDB
ISSVCACCOUNT: NT AUTHORITY\Network Service
ISSVCPASSWORD: <empty>
ISSVCSTARTUPTYPE: Automatic
MATRIXCMBRICKCOMMPORT: 0
MATRIXCMSERVERNAME: <empty>
MATRIXNAME: <empty>
NPENABLED: 0
PID: *****
QUIET: false
QUIETSIMPLE: false
ROLE: <empty>
RSINSTALLMODE: DefaultNativeMode
RSSHPINSTALLMODE: DefaultSharePointMode
RSSVCACCOUNT: <empty>
RSSVCPASSWORD: <empty>
RSSVCSTARTUPTYPE: Automatic
SAPWD: *****
SECURITYMODE: SQL
SQLBACKUPDIR: <empty>
SQLCOLLATION: SQL_Latin1_General_CP1_CI_AS
SQLSVCACCOUNT: NT Service\MSSQL$TESTDB
SQLSVCPASSWORD: <empty>
SQLSVCSTARTUPTYPE: Automatic
SQLSYSADMINACCOUNTS: WIN-1V3VKPV5Q19\Administrator
SQLTEMPDBDIR: <empty>
SQLTEMPDBLOGDIR: <empty>
SQLUSERDBDIR: <empty>
SQLUSERDBLOGDIR: <empty>
SQMREPORTING: false
TCPENABLED: 1
UIMODE: Normal
UpdateEnabled: true
UpdateSource: MU
X86: false
Configuration file: C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20140528_170909\ConfigurationFile.ini
Detailed results:
Feature: Database Engine Services
Status: Failed: see logs for details
Reason for failure: An error occurred during the setup process of the feature.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A001A
Error description: Wait on the Database Engine recovery handle failed. Check the SQL Server error log for potential causes.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026
Feature: SQL Browser
Status: Passed
Feature: SQL Writer
Status: Passed
Feature: SQL Client Connectivity
Status: Passed
Feature: SQL Client Connectivity SDK
Status: Passed
Rules with failures:
Global rules:
Scenario specific rules:
Rules report file: C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20140528_170909\SystemConfigurationCheck_Report.htm
(Error Log)
2014-05-28 17:17:26.64 spid8s 0 transactions rolled back in database 'msdb' (4:0). This is an informational message only. No user action is required.
2014-05-28 17:17:26.73 spid9s Starting up database 'model'.
2014-05-28 17:17:28.24 spid9s Error: 9004, Severity: 23, State: 6.
2014-05-28 17:17:28.24 spid9s An error occurred while processing the log for database 'model'. If possible, restore from backup. If a backup is not available, it might be necessary to rebuild the log.
2014-05-28 17:17:28.24 spid9s SQL Trace was stopped due to server shutdown. Trace ID = '1'. This is an informational message only; no user action is required.
(Details)
(01) 2014-05-28 17:17:28 Slp: Exception type: Microsoft.SqlServer.Configuration.SqlEngine.SqlEngineConfigException
(01) 2014-05-28 17:17:28 Slp: Message:
(01) 2014-05-28 17:17:28 Slp: Wait on the Database Engine recovery handle failed. Check the SQL Server error log for potential causes.
(01) 2014-05-28 17:17:28 Slp: HResult : 0x851a001a
(01) 2014-05-28 17:17:28 Slp: FacilityCode : 1306 (51a)
(01) 2014-05-28 17:17:28 Slp: ErrorCode : 26 (001a)
(01) 2014-05-28 17:17:28 Slp: Data:
(01) 2014-05-28 17:17:28 Slp: SQL.Setup.FailureCategory = ConfigurationFailure
(01) 2014-05-28 17:17:28 Slp: WatsonConfigActionData = INSTALL@CONFIGRC@SQL_ENGINE_CORE_INST
(01) 2014-05-28 17:17:28 Slp: WatsonExceptionFeatureIdsActionData = System.String[]
(01) 2014-05-28 17:17:28 Slp: Stack:
(01) 2014-05-28 17:17:28 Slp: at Microsoft.SqlServer.Configuration.SqlEngine.SqlServerServiceBase.WaitSqlServerStart(Process processSql)
(01) 2014-05-28 17:17:28 Slp: at Microsoft.SqlServer.Configuration.SqlEngine.SqlServerServiceSCM.StartSqlServer(String[] parameters)
(01) 2014-05-28 17:17:28 Slp: at Microsoft.SqlServer.Configuration.SqlEngine.SqlEngineDBStartConfig.ConfigSQLServerSystemDatabases(EffectiveProperties properties, Boolean isConfiguringTemplateDBs, Boolean useInstallInputs)
(01) 2014-05-28 17:17:28 Slp: at Microsoft.SqlServer.Configuration.SqlEngine.SqlEngineDBStartConfig.DoCommonDBStartConfig(ConfigActionTiming timing)
(01) 2014-05-28 17:17:28 Slp: at Microsoft.SqlServer.Configuration.SqlConfigBase.SlpConfigAction.ExecuteAction(String actionId)
(01) 2014-05-28 17:17:28 Slp: at Microsoft.SqlServer.Configuration.SqlConfigBase.SlpConfigAction.Execute(String actionId, TextWriter errorStream)
(01) 2014-05-28 17:17:28 Slp: Watson Bucket 1
Original Parameter Values
(01) 2014-05-28 17:17:28 Slp: Parameter 0 : SQL Server 2012@RTM@
(01) 2014-05-28 17:17:28 Slp: Parameter 1 : Microsoft.SqlServer.Configuration.SqlEngine.SqlServerServiceBase.WaitSqlServerStart
(01) 2014-05-28 17:17:28 Slp: Parameter 2 : Microsoft.SqlServer.Configuration.SqlEngine.SqlServerServiceBase.WaitSqlServerStart
(01) 2014-05-28 17:17:28 Slp: Parameter 3 : Microsoft.SqlServer.Configuration.SqlEngine.SqlEngineConfigException@1306@26
(01) 2014-05-28 17:17:28 Slp: Parameter 4 : Microsoft.SqlServer.Configuration.SqlEngine.SqlEngineConfigException@1306@26
(01) 2014-05-28 17:17:28 Slp: Parameter 5 : SqlEngineDBStartConfigAction_install_configrc
(01) 2014-05-28 17:17:28 Slp: Parameter 6 : INSTALL@CONFIGRC@SQL_ENGINE_CORE_INST
(01) 2014-05-28 17:17:28 Slp:
Final Parameter Values
(01) 2014-05-28 17:17:28 Slp: Parameter 0 : SQL Server 2012@RTM@
(01) 2014-05-28 17:17:28 Slp: Parameter 1 : 0xD15B4EB2
(01) 2014-05-28 17:17:28 Slp: Parameter 2 : 0xD15B4EB2
(01) 2014-05-28 17:17:28 Slp: Parameter 3 : 0x4BDAF9BA@1306@26
(01) 2014-05-28 17:17:28 Slp: Parameter 4 : 0x4BDAF9BA@1306@26
(01) 2014-05-28 17:17:28 Slp: Parameter 5 : SqlEngineDBStartConfigAction_install_configrc
(01) 2014-05-28 17:17:28 Slp: Parameter 6 : 0x9C5770A6Hi Nababoya:
As you are telling this is a test installation process...
In the logs i m seeing the error message "An error occurred while processing the log for database 'model'. If possible, restore from backup. If a backup is not available, it might be necessary to rebuild the log.".
1) If the SQL Services was installed successfully and SQL Service was not able to start because of model database issue...
1.1) If you have model database SQL back file, start the SQL Server in single user mode with minimum configuration and try to restore MODEL database
http://blogs.msdn.com/b/sqlserverfaq/archive/2011/05/11/inf-hey-my-sql-server-service-is-not-starting-what-do-i-do.aspx
1.2) If you don't have backups., try to rebuild the system databases but make sure that you are not losing any data critical data on master and SQL Jobs on MSDB
http://msdn.microsoft.com/en-us/library/dd207003%28v=sql.110%29.aspx#RebuildProcedure
2) As if this is a new installation try to repair the instance with the help of setup media file
3) If the repair option fails., the last option wipe out the complete SQL Server components from Services.msc and Registries and start new installation.
4) Make sure when you are doing un-installation all the required SQL Server components on services.msc should be in stop state.
Hope this helps and let me know any questions...
Thanks,
Thanks, Satish Kumar. Please mark as this post as answered if my anser helps you to resolves your issue :) -
Note: This is not an official document, it discusses Oracle Enterprise Manager Grid Control (EMGC) installation on Redhat Linux Update 3 & Update 4 with new database NOT with an existing database. Both OS Updates were installed with FULL PACKAGE INSTALLATION option. Oracle Universal Installer creates the database automatically before creating the EMGC repository.
• For Linux the base version of the EMGC is 10.2.0.1 and for Windows platform it is 10.2.0.2.
• The database release is 10.1.0.4 with EMGC 10.2.0.1.
• When installed it creates three Oracle Homes: 1) db10g (database), 2) oms10g (Oracle Management Service), and 3) agent10g.
Course of Action:
To get to Oracle EMGC 10.2.0.3:
• Install EMGC 10.2.0.1
Upgrade Oracle Home oms10g to 10.2.0.3.
Upgrade Oracle Home agent10g to 10.2.0.3.
To get to Oracle Database 10g 10.2.0.3:
• Oracle Database 10g 10.1.0.4 will get installed by the OUI automatically
Upgrade Oracle Database 10g to 10.2.0.1 in new Oracle DB Home.
Upgrade new Oracle DB Home to 10.2.0.3.
====================================
Installing EM Grid Control 10.2.0.1:
====================================
To install EMGC 10.2.0.1 download all the three files: Linux_Grid_Control_full_102010_disk1.zip, Linux_Grid_Control_full_102010_disk2.zip, Linux_Grid_Control_full_102010_disk3.zip from http://www.oracle.com/technology/software/products/oem/htdocs/linuxsoft.html.
If you have unzipped all the downloaded zip files in separate directories then the very first error message slammed at your face after starting the installation will be something like “OUI-10133: Invalid Staging Area. There Area No Top Level Components”. All you have to do is to unzip all the three files in the single directory (Metalink 395030.1).
After unzipping all the files in the same directory follow the steps that are given on the follow URL.
http://www.oracle.com/technology/obe/obe10gemgc_10202/install/install.htm
BUT the problem is that you will be punched with few other error messages during the installation that will terminate the installation. The WORKAROUND is given below.
There are three stages of the installation by OUI:
1. Installation of EM Repository Database 10.2.0.1.
2. Installation of EM Grid Console 10.2.0.1.
3. Installation of Agent 10.2.0.1.
The first stage completes without any problem and on the OUI you will see: Oracle Enterprise Manager Repository Database 10.2.0.1.0 installed. While installing the Grid Console, during copying files for "Oracle Application Server 10g 10.1.2.0.2" at 90% OUI will pop up an error message "An error occurred during runtime." You will see lines similar to the following lines in the installation log files.
INFO: Calling Action SpawnActions10.1.0.3.0 Spawn
installcommand = /u01/app/oracle/product/10.2.0/oms10g/bin/OracleAS_Relink_Patch.sh
deinstallcommand =
WaitForCompletion = null
INFO: Exception occured during spawning :java.io.IOException: /u01/app/oracle/product/10.2.0/oms10g/bin/OracleAS_Relink_Patch.sh: cannot execute
INFO: Spawning the modified command :/u01/app/oracle/product/10.2.0/oms10g/bin/OracleAS_Relink_Patch.sh
INFO: Exception thrown from action: Spawn
Exception Name: RuntimeException
Exception String: An error occurred during runtime.
Exception Severity: 0
Problem:
There is a bug which is still being worked on by the DEV : Bug 5203165 : Abstract: CANNOT EXECUTE ../oms10g/bin/OracleAs_Relink_Patch.sh AT INSTALL
Note that this is an unpublished bug, not viewable via Metalink. The bug apparently occurs only on RHEL4 (32bit) Update 2 and Update 3 (I faced the same thing in Update 4 as well).
Workaround:
• Leave the error message as it is and change the execution permission of the script OracleAS_Relink_Patch.sh.
$ chmod +x /u01/app/oracle/product/10.2.0/oms10g/bin/OracleAS_Relink_Patch.sh
• Now press Retry on the error message pop up window. The installation will resume.
On the same stage while linking at 90% one another error message will pop up “Error in invoking target 'install' of makefile '/u01/app/oracle/product/10.2.0/oms10g/sqlplus/lib/ins_sqlplus.mk'”.
Problem:
Hitting bug : 5203194 :Abstract: RELINK FAILS ON 10.2 GC INSTALL -LIBCLNTSH.SO: UNDEFINED REFERENCE TO NNFGTABLE
Bug is not published in Metalink. As per the description: Installing 10.2.0.2 Grid Control on RHEL4 Update 2 or Update 3 (I faced the same thing in Update 4 as well). This generates an error in the linking phase. The error is generated while attempting to relink sqlplus.
Workaround:
• Stop installation of all components.
• Restart the installation and pick the option to resume the installation.
• This allows the installation to complete.
If by any chance you press continue instead of stopping the installation you should get ready for the garbage OUI is going to throw at you:
Error in invoking target 'install' of makefile '/u01/app/oracle/product/10.2.0/oms10g/network/lib/ins_net_client.mk'
Error in invoking target 'install' of makefile '/u01/app/oracle/product/10.2.0/oms10g/network/lib/ins_nau.mk'
Error in invoking target 'install' of makefile '/u01/app/oracle/product/10.2.0/oms10g/webcache/lib/ins_calypso.mk'
During Setting up 'Perl Interpreter 5.6.1.0.2d'
An error occurred during runtime
During Setting up 'Oracle Application Server 10g 10.1.2.0.2'
The OPMN Process Manager failed to start. Please check the logs in the /u01/app/oracle/product/10.2.0/oms10g/opmn/logs directory for the cause of failure. Once the cause of failure has been remedied, start OPMN manually and click Retry.
HTTP Server Configuration Assistant Failed.
OUI-25031:Some of the configuration assistants failed. It is strongly recommended that you retry the configuration assistants at this time. Not successfully running any "Recommended" assistants means your system will not be correctly configured.
1. Check the Details panel on the Configuration Assistant Screen to see the errors resulting in the failures.
2. Fix the errors causing these failures.
3. Select the failed assistants and click the 'Retry' button to retry them.
====================================
Upgrading EM Grid Control 10.2.0.1 to 10.2.0.3:
====================================
I hope after installing EMGC 10.2.0.1 you are still intending to upgrade it..... :-D Now for that download GridControl_10.2.0.3_Linux.zip from http://www.oracle.com/technology/software/products/oem/htdocs/linuxsoft.html and follow the README.txt file included with the upgrade patch. Before starting the upgrade you will probably have to apply a patch (4329444) on the existing database (10.1.0.4). Anyway, its one of the prereq that you have to complete.
For upgrade follow the steps given on the following URL.
http://www.oracle.com/technology/obe/obe10gemgc_10203/patching/patching.htm
• Keep one thing in mind that you will have to apply the above mentioned patch twice. Once for oms10g home and once for agent10g home.
• Stop all the EMGC related services.
• When applying the patch to a particular home change the ORACLE_HOME to that home. E.g. when applying the patch on the oms10g home:
ORACLE_HOME=$ORACLE_BASE/product/10.2.0/oms10g
and for agent10g home:
ORACLE_HOME=$ORACLE_BASE/product/10.2.0/agent10g
====================================
Upgrading Database from 10.1.0.4 to 10.2.0.1:
====================================
Download the file 10201_database_linux32.zip from http://www.oracle.com/technology/software/products/database/oracle10g/htdocs/10201linuxsoft.html.
• Shutdown all the EMGC related services, the listener, and the database.
• Start the installation of 10.2.0.1.
• Since 10.2.0.1 is a base release that is why you cannot install it in the existing Oracle Home i.e. in db10g. You have to define a separate Oracle Home for the new installation say db10gR2.
• During the installation it will ask you to upgrade the existing database 10.1.0.4 to 10.2.0.1, click YES.
• Hopefully the installation will go just fine.
====================================
Upgrading Database from 10.2.0.1 to 10.2.0.3:
====================================
Download the file p5337014_10203_LINUX.zip from http://metalink.oracle.com.
• Shutdown all the EMGC related services, the listener, and the database.
• Start the installation of 10.2.0.3.
• During installation it will ask for the Oracle Home, give the new Oracle Database Home i.e. db10gR2 and proceed.
• Hopefully the installation will go just fine.
• Start the database, listener, and all the EM GC related services:
o $ORACLE_HOME/../oms10g/bin/emctl start em
o $ORACLE_HOME/../agent10g/bin/emctl start agent
o $ORACLE_HOME/../oms10g/opmn/bin/opmnctl startall
• Try accessing the EMGC through the browser http://xyz.abc.com:4889/em
• You will see two Oracle databases in the EMGC, the old one, 10.1.0.4 and the new one 10.2.0.3. Don’t worry it will not bother you at all. It will only occupy a GB or so. Though, you can remove it through OUI.
Congratulations!!!! you have now Enterprise Manager Grid Control 10.2.0.3 with Database 10.2.0.3 on RHEL 4 Update 3.
You can repeat the same exercise for RHEL4 Update 4 as well, but during pre-installation checks you will get 1 warning that:
Checking for compat-libstdc++-296-2.96-132.7.2; found Not found. Failed <<<<
Checking for libstdc++devel-3.4.3-22.1; found Not found. Failed <<<<
Checking for openmotif-21-2.1.30-11; found openmotif-2.2.3-10.RHEL4.5. Failed <<<<
Actually, these packages are already there in the OS but the higher versions. It is evident from the above messages that first it “founds” the package but due to the version conflict it says that “Not found”. All you have to do is click on the check box next to warning, it will change to User Verified or something. Now press Next and follow the same steps that we followed for Update 3.The quicker way is to use sofware only method to install 10204 oms and dirctly use 10203 datbase directly as a oms repository.
Check the section Installing 'Software-Only' and Configuring Later
http://download.oracle.com/docs/cd/B16240_01/doc/install.102/e10953/installing_em.htm#CCHGBDCB -
Re: Not able to install oracle database 11.2.0.2.0 in Windows 7
Hello,
I too am facing a similar issue while installing Oracle 12c Datbaase on a Virtual box machine with Windows 2008 R2 OS Image.
Cause - Failed to access the temporary location.
Action - Ensure that the current user has required permissions to access the temporary location.
Additional Information:
- Framework setup check failed on all the nodes
- Cause: Cause Of Problem Not Available
- Action: User Action Not Available
Summary of the failed nodes
ntejani-vbox2
- Version of exectask could not be retrieved from node "ntejani-vbox2"
- Cause: Cause Of Problem Not Available
- Action: User Action Not Available
My HOst machine is windows 7 and I have allocated 4GB of physical memory and 4 Processors to the Virtual Machine.
I believe this is a decent config for Oracle 12c Database. M also logging on to this system with a Admin Rights User and invoking the Installation using this User.
Earlier I had Oracle 11g Database installed on this along with Enterprise Manager 12c Cloud Control.
Recently I wanted to upgrade to Oracle 12c Database for which my multiple upgrade attempts failed with the above error. So I thought the system might be requiring some minimum. spare on the C Drive.
I decided to go ahead with Oracle 11g De-install and further attempted to install 12c Database. However the problem still persists .
Any help and clues on how to Resolve this issue is highly appreciated.
Regards,
Nayan Tejani
+91 98333 02666Sorry missed to put across the error log. here it is from the recently failed installation
~~~
Using paramFile: E:\Oracle12cDatabase\database\install\oraparam.ini
Checking monitor: must be configured to display at least 256 colors. Actual 4294967296 Passed
The commandline for unzip:
E:\Oracle12cDatabase\database\install\unzip -qqqo ..\stage\Components\oracle.jdk\1.6.0.37.0\1\DataFiles/"*.jar" -d "E:\TEMP\OraInstall2013-09-04_07-16-57AM" INFO: Loading data from: jar:file:/E:/TEMP/OraInstall2013-09-04_07-16-57AM/ext/jlib/installcommons_1.0.0b.jar!/oracle/install/driver/oui/resource/ConfigCommandMappings.xml
INFO: Loading beanstore from jar:file:/E:/TEMP/OraInstall2013-09-04_07-16-57AM/ext/jlib/installcommons_1.0.0b.jar!/oracle/install/driver/oui/resource/ConfigCommandMappings.xml
INFO: Restoring class oracle.install.driver.oui.ConfigCmdMappings from jar:file:/E:/TEMP/OraInstall2013-09-04_07-16-57AM/ext/jlib/installcommons_1.0.0b.jar!/oracle/install/driver/oui/resource/ConfigCommandMappings.xml
INFO: Loading beans from Xml Bean Store. [BeanStoreName:config-data]
INFO: Setting value for the property:id in the bean:configcmd
INFO: Setting value for the property:platformcmdmap in the bean:configcmd
INFO: Setting value for the property:id in the bean:configcmd
INFO: Setting value for the property:platformcmdmap in the bean:configcmd
INFO: Setting value for the property:id in the bean:configcmd
INFO: Setting value for the property:platformcmdmap in the bean:configcmd
INFO: Setting value for the property:id in the bean:configcmd
INFO: Setting value for the property:platformcmdmap in the bean:configcmd
INFO: Setting value for the property:id in the bean:configcmd
INFO: Setting value for the property:platformcmdmap in the bean:configcmd
INFO: Setting value for the property:id in the bean:configcmd
INFO: Setting value for the property:platformcmdmap in the bean:configcmd
INFO: Setting value for the property:id in the bean:configcmd
INFO: Setting value for the property:platformcmdmap in the bean:configcmd
INFO: Setting value for the property:id in the bean:configcmd
INFO: Setting value for the property:platformcmdmap in the bean:configcmd
INFO: Setting value for the property:id in the bean:configcmd
INFO: Setting value for the property:platformcmdmap in the bean:configcmd
INFO: Setting value for the property:id in the bean:configcmd
INFO: Setting value for the property:platformcmdmap in the bean:configcmd
INFO: Setting value for the property:id in the bean:configcmd
INFO: Setting value for the property:platformcmdmap in the bean:configcmd
INFO: Setting value for the property:id in the bean:configcmd
INFO: Setting value for the property:platformcmdmap in the bean:configcmd
INFO: Setting value for the property:configcmds in the bean:configcmdmappings
INFO: Inventory exists: true
INFO: oraInst.loc does not exist
INFO: Gathering system details...
INFO: Registering setup bean
INFO: Building Flow
INFO: No global condition definition found.
INFO: Building the flow graph
INFO: Loaded state AutoUpdatesOptionsUI
INFO: Loaded state UpdatesListUI
INFO: Loaded state finishupdates
INFO: Building the flow graph
INFO: Loaded state prepInstall
INFO: Loaded state decideOCMInstall
INFO: Loaded state autoupdatesDecider
INFO: Loaded state preAutoUpdates
INFO: Loaded state AutoUpdatesOptionsUI
INFO: Loaded state UpdatesListUI
INFO: Loaded state supportedOSCheck
INFO: Loaded state getOCMDetails
INFO: Loaded state mtsDialog
INFO: Loaded state installOptions
INFO: Loaded state getWindowsSecureOptionDetails
INFO: Loaded state getSystemClass
INFO: Loaded state DBTypeSelectionPage
INFO: Loaded state RACDBTypeSelectionPage
INFO: Loaded state nodeSelectionPage
INFO: Loaded state upgradeValidation
INFO: Loaded state installType
INFO: Loaded state quickInstallPage
INFO: Loaded state productLanguage
INFO: Loaded state inventoryPage
INFO: Loaded state getOracleHome
INFO: Loaded state dbEdition
INFO: Loaded state configurationType
INFO: Loaded state dbIdentifier
INFO: Loaded state configurationOption
INFO: Loaded state managementOption
INFO: Loaded state storageOption
INFO: Loaded state recoveryOption
INFO: Loaded state selectASMDiskGroups
INFO: Loaded state schemaPasswordDialog
INFO: Loaded state getPrivilegedOSGroups
INFO: Loaded state prereqExecutionDecider
INFO: Loaded state performChecks
INFO: Loaded state showSummary
INFO: Loaded state setup
INFO: Loaded state finish
INFO: Linking states
INFO: State[AutoUpdatesOptionsUI]: route=NO_AUTO_UPDATES; to=supportedOSCheck
INFO: State[AutoUpdatesOptionsUI]: route=success; to=UpdatesListUI
INFO: State[DBTypeSelectionPage]: route=rac_dbcreate; to=RACDBTypeSelectionPage
INFO: State[DBTypeSelectionPage]: route=rac_no_dbcreate; to=nodeSelectionPage
INFO: State[DBTypeSelectionPage]: route=si_dbcreate; to=installType
INFO: State[DBTypeSelectionPage]: route=si_no_dbcreate; to=productLanguage
INFO: State[RACDBTypeSelectionPage]: route=admin; to=nodeSelectionPage
INFO: State[RACDBTypeSelectionPage]: route=policy; to=installType
INFO: State[UpdatesListUI]: route=success; to=supportedOSCheck
INFO: State[autoupdatesDecider]: route=AUTO_UPDATES_DISABLE; to=supportedOSCheck
INFO: State[autoupdatesDecider]: route=AUTO_UPDATES_STATE_SKIP; to=supportedOSCheck
INFO: State[autoupdatesDecider]: route=success; to=preAutoUpdates
INFO: State[configurationOption]: route=success; to=storageOption
INFO: State[configurationType]: route=success; to=dbIdentifier
INFO: State[dbEdition]: route=oraclehome_location; to=getWindowsSecureOptionDetails
INFO: State[dbIdentifier]: route=success; to=configurationOption
INFO: State[decideOCMInstall]: route=ignoreOCM; to=autoupdatesDecider
INFO: State[decideOCMInstall]: route=requireOCM; to=getOCMDetails
INFO: State[getOCMDetails]: route=success; to=mtsDialog
INFO: State[getOracleHome]: route=advanced_yes_createDB_yes; to=configurationType
INFO: State[getOracleHome]: route=advanced_yes_inventory_no; to=inventoryPage
INFO: State[getOracleHome]: route=advanced_yes_softwareDB_yes; to=prereqExecutionDecider
INFO: State[getOracleHome]: route=advanced_yes_upgrade_yes; to=prereqExecutionDecider
INFO: State[getPrivilegedOSGroups]: route=success; to=prereqExecutionDecider
INFO: State[getSystemClass]: route=desktop_class_yes; to=getWindowsSecureOptionDetails
INFO: State[getSystemClass]: route=server_class_yes; to=DBTypeSelectionPage
INFO: State[getWindowsSecureOptionDetails]: route=basic_yes; to=quickInstallPage
INFO: State[getWindowsSecureOptionDetails]: route=desktop_class_yes; to=quickInstallPage
INFO: State[getWindowsSecureOptionDetails]: route=success; to=getOracleHome
INFO: State[installOptions]: route=advanced_yes_softwareDB_yes; to=DBTypeSelectionPage
INFO: State[installOptions]: route=migrate_yes_clusterware_no; to=upgradeValidation
INFO: State[installOptions]: route=migrate_yes_clusterware_yes; to=DBTypeSelectionPage
INFO: State[installOptions]: route=system_class; to=getSystemClass
INFO: State[installType]: route=advanced_yes; to=productLanguage
INFO: State[installType]: route=basic_yes; to=getWindowsSecureOptionDetails
INFO: State[inventoryPage]: route=advanced_yes_createDB_yes; to=configurationType
INFO: State[inventoryPage]: route=advanced_yes_softwareDB_yes; to=prereqExecutionDecider
INFO: State[inventoryPage]: route=basic_yes; to=prereqExecutionDecider
INFO: Condition of state[inventoryPage]: route=advanced_yes_createDB_yes; to=configurationType
INFO: Condition of state[inventoryPage]: route=advanced_yes_softwareDB_yes; to=prereqExecutionDecider
INFO: Condition of state[inventoryPage]: route=basic_yes; to=prereqExecutionDecider
INFO: State[managementOption]: route=success; to=recoveryOption
INFO: State[mtsDialog]: route=success; to=autoupdatesDecider
INFO: State[nodeSelectionPage]: route=create_and_configureDB; to=installType
INFO: State[nodeSelectionPage]: route=software_onlyDB; to=productLanguage
INFO: State[nodeSelectionPage]: route=upgradeDB; to=upgradeValidation
INFO: State[performChecks]: route=success; to=showSummary
INFO: State[preAutoUpdates]: route=success; to=AutoUpdatesOptionsUI
INFO: State[prepInstall]: route=DOWNLOAD_UPDATES_ONLY; to=AutoUpdatesOptionsUI
INFO: State[prepInstall]: route=success; to=decideOCMInstall
INFO: State[prereqExecutionDecider]: route=executeprereqs; to=performChecks
INFO: State[prereqExecutionDecider]: route=ignoreprereqs; to=showSummary
INFO: State[productLanguage]: route=productlanguage_yes; to=dbEdition
INFO: State[quickInstallPage]: route=basic_yes_inventory_no; to=inventoryPage
INFO: State[quickInstallPage]: route=basic_yes_inventory_yes; to=prereqExecutionDecider
INFO: State[recoveryOption]: route=asm_chosen_asm_not_present; to=schemaPasswordDialog
INFO: State[recoveryOption]: route=asm_chosen_asm_present; to=selectASMDiskGroups
INFO: State[recoveryOption]: route=asm_not_chosen; to=schemaPasswordDialog
INFO: State[schemaPasswordDialog]: route=success; to=prereqExecutionDecider
INFO: State[selectASMDiskGroups]: route=success; to=schemaPasswordDialog
INFO: State[setup]: route=success; to=finish
INFO: State[showSummary]: route=success; to=setup
INFO: State[storageOption]: route=success; to=managementOption
INFO: State[supportedOSCheck]: route=success; to=installOptions
INFO: State[upgradeValidation]: route=success; to=productLanguage
INFO: State[AutoUpdatesOptionsUI]: route=NO_AUTO_UPDATES; to=finishupdates
INFO: State[AutoUpdatesOptionsUI]: route=success; to=UpdatesListUI
INFO: State[UpdatesListUI]: route=DOWNLOAD_UPDATES_FINISHED; to=finishupdates
INFO: Successfully built the flow
INFO: Opening bean stores from which the beans can be loaded
INFO: Loading beanstore from a given input stream
WARNING: Unable to create xml tag for the key:CommonProgramFiles(x86)
WARNING: Unable to create xml tag for the key:ProgramFiles(x86)
INFO: Translating external format into raw format
INFO: Loading flow data beans
INFO: Loading beans from Properties Bean Store. [BeanStoreName:beanstore]
INFO: Setting value for the property:DBInstallSettings in the bean:DBSetupBean
INFO: Setting value for the property:CentralInventorySettings in the bean:DBSetupBean
INFO: Setting value for the property:oracle_install_autoupdates_myOracleSupportCredentials in the bean:AutoUpdatesInstallSettings
INFO: Setting value for the property:oracle_install_autoupdates_httpProxySettings in the bean:AutoUpdatesInstallSettings
INFO: Setting value for the property:AutoUpdatesInstallSettings in the bean:DBSetupBean
INFO: Setting value for the property:OCMSettings in the bean:DBSetupBean
INFO: Setting value for the property:WindowsSecureOptionSettings in the bean:DBSetupBean
INFO: Setting value for the property:RootConfigurationSettings in the bean:DBSetupBean
INFO: Loading beans from Xml Bean Store. [BeanStoreName:beanstore]
INFO: Setting value for the property:oracle_install_db_StorageType in the bean:DBInstallSettings
INFO: Setting value for the property:oracle_install_db_UseFileSystemForRecovery in the bean:DBInstallSettings
INFO: Setting value for the property:oracle_install_db_UseSamePassword in the bean:DBInstallSettings
INFO: Setting value for the property:oracle_install_db_ConfigTabSelected in the bean:DBInstallSettings
INFO: Setting value for the property:oracle_install_db_CharSetOption in the bean:DBInstallSettings
INFO: Setting value for the property:oracle_install_db_InstallOptionSelected in the bean:DBInstallSettings
INFO: Setting value for the property:oracle_install_db_managementOption in the bean:DBInstallSettings
INFO: Setting value for the property:oracle_install_db_SuperAdminPasswords in the bean:DBInstallSettings
INFO: Setting value for the property:DBInstallSettings in the bean:DBSetupBean
INFO: Setting value for the property:CentralInventorySettings in the bean:DBSetupBean
INFO: Setting value for the property:oracle_install_autoupdates_myOracleSupportCredentials in the bean:AutoUpdatesInstallSettings
INFO: Setting value for the property:oracle_install_autoupdates_httpProxySettings in the bean:AutoUpdatesInstallSettings
INFO: Setting value for the property:AutoUpdatesInstallSettings in the bean:DBSetupBean
INFO: Setting value for the property:OCMSettings in the bean:DBSetupBean
INFO: Setting value for the property:WindowsSecureOptionSettings in the bean:DBSetupBean
INFO: Set value for bean DBSetupBean
INFO: Loading beans from Properties Bean Store. [BeanStoreName:beanstore]
INFO: Loading beans from Xml Bean Store. [BeanStoreName:beanstore]
INFO: Loading beans from Properties Bean Store. [BeanStoreName:beanstore]
INFO: Loading beans from Xml Bean Store. [BeanStoreName:beanstore]
INFO: Loading beans from Properties Bean Store. [BeanStoreName:beanstore]
INFO: Setting value for the property:oracle_install_autoupdates_myOracleSupportCredentials in the bean:AutoUpdatesInstallSettings
INFO: Setting value for the property:oracle_install_autoupdates_httpProxySettings in the bean:AutoUpdatesInstallSettings
INFO: Loading beans from Xml Bean Store. [BeanStoreName:beanstore]
INFO: Closing bean stores from which the beans can be loaded
INFO: Registering the flow views
INFO: Adding View[type: oracle.install.commons.base.interview.common.view.PrereqGUI viewId: null uiType: null]
INFO: oracle.install.commons.base.interview.common.view.PrereqGUI added to View Type Registry with the key as [PrereqUI]
INFO: Adding View[type: oracle.install.commons.base.interview.common.view.SummaryGUI viewId: null uiType: null]
INFO: oracle.install.commons.base.interview.common.view.SummaryGUI added to View Type Registry with the key as [SummaryUI]
INFO: Adding View[type: oracle.install.commons.base.interview.common.view.SetupGUI viewId: null uiType: null]
INFO: oracle.install.commons.base.interview.common.view.SetupGUI added to View Type Registry with the key as [SetupUI]
INFO: Adding View[type: oracle.install.ivw.common.view.InventoryUI viewId: null uiType: null]
INFO: oracle.install.ivw.common.view.InventoryUI added to View Type Registry with the key as [InventoryUI]
INFO: Adding View[type: oracle.install.ivw.common.view.ProductLanguageGUI viewId: ProductLanguageUI uiType: null]
INFO: oracle.install.ivw.common.view.ProductLanguageGUI added to View Type Registry with the key as [ProductLanguageUI]
INFO: Adding View[type: oracle.install.ivw.common.view.OCMDetailsGUI viewId: OCMDetailsUI uiType: null]
INFO: oracle.install.ivw.common.view.OCMDetailsGUI added to View Type Registry with the key as [OCMDetailsUI]
INFO: Adding View[type: oracle.install.ivw.db.view.ConfigurationTypeUI viewId: null uiType: null]
INFO: oracle.install.ivw.db.view.ConfigurationTypeUI added to View Type Registry with the key as [ConfigurationTypeUI]
INFO: Adding View[type: oracle.install.ivw.db.view.DBIdentifierUI viewId: null uiType: null]
INFO: oracle.install.ivw.db.view.DBIdentifierUI added to View Type Registry with the key as [DBIdentifierUI]
INFO: Adding View[type: oracle.install.ivw.db.view.ConfigurationOptionsUI viewId: null uiType: null]
INFO: oracle.install.ivw.db.view.ConfigurationOptionsUI added to View Type Registry with the key as [ConfigurationOptionsUI]
INFO: Adding View[type: oracle.install.ivw.db.view.StorageOptionsUI viewId: null uiType: null]
INFO: oracle.install.ivw.db.view.StorageOptionsUI added to View Type Registry with the key as [StorageOptionsUI]
INFO: Adding View[type: oracle.install.ivw.db.view.RecoveryBackupUI viewId: null uiType: null]
INFO: oracle.install.ivw.db.view.RecoveryBackupUI added to View Type Registry with the key as [RecoveryBackupUI]
INFO: Adding View[type: oracle.install.ivw.db.view.ManagementOptionsUI viewId: null uiType: null]
INFO: oracle.install.ivw.db.view.ManagementOptionsUI added to View Type Registry with the key as [ManagementOptionsUI]
INFO: Adding View[type: oracle.install.ivw.db.view.ASMDiskGroupSelectionGUI viewId: ASMDiskGroupSelectionUI uiType: null]
INFO: oracle.install.ivw.db.view.ASMDiskGroupSelectionGUI added to View Type Registry with the key as [ASMDiskGroupSelectionUI]
INFO: Adding View[type: oracle.install.ivw.db.view.SchemaPasswordUI viewId: null uiType: null]
INFO: oracle.install.ivw.db.view.SchemaPasswordUI added to View Type Registry with the key as [SchemaPasswordUI]
INFO: Adding View[type: oracle.install.ivw.db.view.QuickInstallUI viewId: null uiType: null]
INFO: oracle.install.ivw.db.view.QuickInstallUI added to View Type Registry with the key as [QuickInstallUI]
INFO: Adding View[type: oracle.install.ivw.db.view.InstallOptionsUI viewId: null uiType: null]
INFO: oracle.install.ivw.db.view.InstallOptionsUI added to View Type Registry with the key as [InstallOptionsUI]
INFO: Adding View[type: oracle.install.ivw.db.view.WindowsSecureOptionUI viewId: WindowsSecureOptionUI uiType: null]
INFO: oracle.install.ivw.db.view.WindowsSecureOptionUI added to View Type Registry with the key as [WindowsSecureOptionUI]
INFO: Adding View[type: oracle.install.ivw.db.view.SystemClassUI viewId: SystemClassUI uiType: null]
INFO: oracle.install.ivw.db.view.SystemClassUI added to View Type Registry with the key as [SystemClassUI]
INFO: Adding View[type: oracle.install.ivw.db.view.InstallLocationUI viewId: null uiType: null]
INFO: oracle.install.ivw.db.view.InstallLocationUI added to View Type Registry with the key as [InstallLocationUI]
INFO: Adding View[type: oracle.install.ivw.db.view.DBEditionGUI viewId: null uiType: null]
INFO: oracle.install.ivw.db.view.DBEditionGUI added to View Type Registry with the key as [DBEditionUI]
INFO: Adding View[type: oracle.install.ivw.db.view.NodeSelectionUI viewId: null uiType: null]
INFO: oracle.install.ivw.db.view.NodeSelectionUI added to View Type Registry with the key as [NodeSelectionUI]
INFO: Adding View[type: oracle.install.ivw.db.view.DBTypeSelectionGUI viewId: DBTypeSelectionUI uiType: null]
INFO: oracle.install.ivw.db.view.DBTypeSelectionGUI added to View Type Registry with the key as [DBTypeSelectionUI]
INFO: Adding View[type: oracle.install.ivw.db.view.RACDBTypeSelectionGUI viewId: RACDBTypeSelectionUI uiType: null]
INFO: oracle.install.ivw.db.view.RACDBTypeSelectionGUI added to View Type Registry with the key as [RACDBTypeSelectionUI]
INFO: Adding View[type: oracle.install.ivw.db.view.FinishUI viewId: null uiType: null]
INFO: oracle.install.ivw.db.view.FinishUI added to View Type Registry with the key as [FinishUI]
INFO: Adding View[type: oracle.install.ivw.db.view.PrivilegedOSGroupsGUI viewId: null uiType: null]
INFO: oracle.install.ivw.db.view.PrivilegedOSGroupsGUI added to View Type Registry with the key as [PrivilegedOSGroupsUI]
INFO: Adding View[type: oracle.install.ivw.db.view.InstallTypeGUI viewId: installTypeUI uiType: null]
INFO: oracle.install.ivw.db.view.InstallTypeGUI added to View Type Registry with the key as [installTypeUI]
INFO: Adding View[type: oracle.install.ivw.common.view.AutoUpdatesOptionsUI viewId: AutoUpdatesOptionsUI uiType: null]
INFO: oracle.install.ivw.common.view.AutoUpdatesOptionsUI added to View Type Registry with the key as [AutoUpdatesOptionsUI]
INFO: Adding View[type: oracle.install.ivw.common.view.UpdatesListUI viewId: UpdatesListUI uiType: null]
INFO: oracle.install.ivw.common.view.UpdatesListUI added to View Type Registry with the key as [UpdatesListUI]
INFO: Adding View[type: oracle.install.ivw.common.view.FinishUpdatesUI viewId: FinishUpdatesUI uiType: null]
INFO: oracle.install.ivw.common.view.FinishUpdatesUI added to View Type Registry with the key as [FinishUpdatesUI]
INFO: Initial values of Setup Properties :
PROPERTY VALUE
AutoUpdatesInstallSettings oracle.install.ivw.common.bean.AutoUpdates
InstallSettings@78216b59
CLUSTER_NODES {}
COLLECTOR_IGNORE_CONFIGURATION false
COLLECTOR_IGNORE_FAILURES false
COLLECTOR_RESPONSE_FILE
CentralInventorySettings oracle.install.ivw.common.bean.CentralInve
ntorySettings@3241b635
DBInstallSettings oracle.install.ivw.db.bean.DBInstallSettin
gs@1f635484
DECLINE_SECURITY_UPDATES false
FROM_LOCATION E:\Oracle12cDatabase\database\install\../s
tage/products.xml
INSTALL_TYPE EE
MYORACLESUPPORT_PASSWORD *Protected value, not to be logged*
MYORACLESUPPORT_USERNAME
OCMSettings oracle.install.ivw.common.bean.OCMSettings
@3fd83cf4
ORACLE_BASE
ORACLE_HOME
ORACLE_HOSTNAME NTEJANI-VBOX2
PROXY_HOST
PROXY_PORT
PROXY_PWD *Protected value, not to be logged*
PROXY_USER
RootConfigurationSettings oracle.install.ivw.common.bean.RootConfigu
rationSettings@54be8c3e
SECURITY_UPDATES_VIA_MYORACLESUPPORT true
SELECTED_LANGUAGES {"en"}
UNIX_GROUP_NAME
WindowsSecureOptionSettings oracle.install.ivw.common.bean.WindowsSecu
reOptionSettings@d89d7eb
b_rdbmsInstall true
oracle.install.db.isCCRAuthenticationUsed false
oracle_install_IsBuiltInAccount false
oracle_install_IsOracleServiceUserExists false
oracle_install_LaunchNetCA false
oracle_install_NoMigration false
oracle_install_OCR_PartitionLocation
oracle_install_ProductName
oracle_install_RACInstall false
oracle_install_RDBMSInstalling true
oracle_install_autoupdates_httpProxyPort 0
oracle_install_autoupdates_httpProxySettings oracle.install.ivw.common.bean.HttpProxySe
ttings@5fb7565
oracle_install_autoupdates_myOracleSupportCredentials oracle.install.ivw.common.bean.MyOracleSup
portSettings@5a0eddac
oracle_install_db_ASMSNMPUserPassword *Protected value, not to be logged*
oracle_install_db_AutoMemoryOption false
oracle_install_db_CharSetOption 3
oracle_install_db_CharacterSet
oracle_install_db_ConfigTabSelected 0
oracle_install_db_ConfigurationType &General Purpose / Transaction Processing
oracle_install_db_ConfigureAsContainerDB false
oracle_install_db_DiskGroupName
oracle_install_db_DiskGroupNameForASM
oracle_install_db_EnableAutoBackup false
oracle_install_db_InstallEdition EE
oracle_install_db_InstallOption INSTALL_DB_AND_CONFIG
oracle_install_db_InstallOptionSelected 1
oracle_install_db_InstallType EE
oracle_install_db_LaunchDBCA false
oracle_install_db_LaunchODMA false
oracle_install_db_LoadExampleSchemas false
oracle_install_db_MountPointLocation
oracle_install_db_QuickInstallOption false
oracle_install_db_RecoveryBackUpLocation
oracle_install_db_SID
oracle_install_db_ServerPoolCardinality 0
oracle_install_db_SetOracleBase false
oracle_install_db_SkipHARegistration false
oracle_install_db_StarterDatabaseType GENERAL_PURPOSE
oracle_install_db_StorageType 0
oracle_install_db_SuperAdminPasswords *Protected value, not to be logged*
oracle_install_db_SuperAdminSamePasswdForAll *Protected value, not to be logged*
oracle_install_db_SystemClass DESKTOP_CLASS
oracle_install_db_Type 1
oracle_install_db_UseFileSystemForRecovery false
oracle_install_db_UseSamePassword false
oracle_install_db_isRACOneInstall false
oracle_install_db_managementOption DEFAULT
oracle_install_db_omsPort 0
oracle_install_db_racOneServiceName
oracle_install_rootConfiguration_ExecuteRootScript false
INFO: Launching Oracle Database 12c Release 1 Installer
INFO: Started executing the flow in INTERACTIVE mode
INFO: Waiting for completion of background operations
INFO: Finishing all forked tasks at state prepInstall
INFO: Waiting for completion all forked tasks at state prepInstall
INFO: All forked task are completed at state prepInstall
INFO: Completed background operations
INFO: Executing action at state prepInstall
INFO: Completed executing action at state <prepInstall>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Moved to state <prepInstall>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Validating view at state <prepInstall>
INFO: Completed validating view at state <prepInstall>
INFO: Validating state <prepInstall>
WARNING: Validation disabled for the state prepInstall
INFO: Completed validating state <prepInstall>
INFO: Verifying route success
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Executing action at state decideOCMInstall
INFO: Completed executing action at state <decideOCMInstall>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Moved to state <decideOCMInstall>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Validating view at state <decideOCMInstall>
INFO: Completed validating view at state <decideOCMInstall>
INFO: Validating state <decideOCMInstall>
WARNING: Validation disabled for the state decideOCMInstall
INFO: Completed validating state <decideOCMInstall>
INFO: Verifying route requireOCM
INFO: Get view named [OCMDetailsUI]
INFO: View for [OCMDetailsUI] is oracle.install.ivw.common.view.OCMDetailsGUI@e235e9d
INFO: Initializing view <OCMDetailsUI> at state <getOCMDetails>
INFO: Completed initializing view <OCMDetailsUI> at state <getOCMDetails>
INFO: Displaying view <OCMDetailsUI> at state <getOCMDetails>
INFO: Completed displaying view <OCMDetailsUI> at state <getOCMDetails>
INFO: Loading view <OCMDetailsUI> at state <getOCMDetails>
INFO: Completed loading view <OCMDetailsUI> at state <getOCMDetails>
INFO: Localizing view <OCMDetailsUI> at state <getOCMDetails>
INFO: Completed localizing view <OCMDetailsUI> at state <getOCMDetails>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Executing action at state getOCMDetails
INFO: Completed executing action at state <getOCMDetails>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Moved to state <getOCMDetails>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Validating view at state <getOCMDetails>
INFO: Completed validating view at state <getOCMDetails>
INFO: Validating state <getOCMDetails>
INFO: Completed validating state <getOCMDetails>
INFO: Verifying route success
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Executing action at state mtsDialog
INFO: Completed executing action at state <mtsDialog>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Moved to state <mtsDialog>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Validating view at state <mtsDialog>
INFO: Completed validating view at state <mtsDialog>
INFO: Validating state <mtsDialog>
INFO: Completed validating state <mtsDialog>
INFO: Verifying route success
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Executing action at state autoupdatesDecider
INFO: Completed executing action at state <autoupdatesDecider>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Moved to state <autoupdatesDecider>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Validating view at state <autoupdatesDecider>
INFO: Completed validating view at state <autoupdatesDecider>
INFO: Validating state <autoupdatesDecider>
WARNING: Validation disabled for the state autoupdatesDecider
INFO: Completed validating state <autoupdatesDecider>
INFO: Reading shiphome metadata from E:\Oracle12cDatabase\database\install\..\stage\shiphomeproperties.xml
INFO: Loading beanstore from file:/E:/Oracle12cDatabase/database/install/../stage/shiphomeproperties.xml
INFO: Translating external format into raw format
INFO: Restoring class oracle.install.driver.oui.OUIMetadata from file:/E:/Oracle12cDatabase/database/install/../stage/shiphomeproperties.xml
INFO: Loading beans from Xml Bean Store. [BeanStoreName:oui-metadata]
INFO: Setting value for the property:properties in the bean:oui-metadata
INFO: Verifying route success
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Executing action at state preAutoUpdates
INFO: Completed executing action at state <preAutoUpdates>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Moved to state <preAutoUpdates>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Validating view at state <preAutoUpdates>
INFO: Completed validating view at state <preAutoUpdates>
INFO: Validating state <preAutoUpdates>
WARNING: Validation disabled for the state preAutoUpdates
INFO: Completed validating state <preAutoUpdates>
INFO: Verifying route success
INFO: Get view named [AutoUpdatesOptionsUI]
INFO: View for [AutoUpdatesOptionsUI] is oracle.install.ivw.common.view.AutoUpdatesOptionsUI[,0,0,0x0,invalid,layout=java.awt.FlowLayout,alignmentX=0.0,alignmentY=0.0,border=,flags=9,maximumSize=,minimumSize=,preferredSize=]
INFO: Initializing view <AutoUpdatesOptionsUI> at state <AutoUpdatesOptionsUI>
INFO: Completed initializing view <AutoUpdatesOptionsUI> at state <AutoUpdatesOptionsUI>
INFO: Displaying view <AutoUpdatesOptionsUI> at state <AutoUpdatesOptionsUI>
INFO: Completed displaying view <AutoUpdatesOptionsUI> at state <AutoUpdatesOptionsUI>
INFO: Loading view <AutoUpdatesOptionsUI> at state <AutoUpdatesOptionsUI>
INFO: Completed loading view <AutoUpdatesOptionsUI> at state <AutoUpdatesOptionsUI>
INFO: Localizing view <AutoUpdatesOptionsUI> at state <AutoUpdatesOptionsUI>
INFO: Completed localizing view <AutoUpdatesOptionsUI> at state <AutoUpdatesOptionsUI>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Executing action at state AutoUpdatesOptionsUI
INFO: Completed executing action at state <AutoUpdatesOptionsUI>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Moved to state <AutoUpdatesOptionsUI>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Validating view at state <AutoUpdatesOptionsUI>
INFO: Completed validating view at state <AutoUpdatesOptionsUI>
INFO: Validating state <AutoUpdatesOptionsUI>
INFO: Completed validating state <AutoUpdatesOptionsUI>
INFO: No updates will be downloaded or applied
INFO: Verifying route NO_AUTO_UPDATES
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Executing action at state supportedOSCheck
INFO: Completed executing action at state <supportedOSCheck>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Moved to state <supportedOSCheck>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Validating view at state <supportedOSCheck>
INFO: Completed validating view at state <supportedOSCheck>
INFO: Validating state <supportedOSCheck>
INFO: Verifying target environment...
INFO: Checking whether the IP address of the localhost could be determined...
INFO: Completed verification of target environment.
INFO: Verifying setup for installer validations
INFO: Overall status of CVU API call:OPERATION_FAILED
SEVERE: [FATAL] [INS-30131] Initial setup required for the execution of installer validations failed.
CAUSE: Failed to access the temporary location.
ACTION: Ensure that the current user has required permissions to access the temporary location.
*ADDITIONAL INFORMATION:*
- Framework setup check failed on all the nodes
- Cause: Cause Of Problem Not Available
- Action: User Action Not Available
Summary of the failed nodes
ntejani-vbox2
- Version of exectask could not be retrieved from node "ntejani-vbox2"
- Cause: Cause Of Problem Not Available
- Action: User Action Not Available
~~~ -
Installing Discoverer with Database Version Oracle 10g Express Edition
Hello,
Is it possilbe to install Discoverer with database version Oracle 10g Express Edition? I have Oracle Fusion Middleware 11.1.1.1.0 on my Windows XP machine as well. If so, can someone please provide me a link to the Discoverer download.
Regards,
KellyNote that the Personal Edition of the database is 'the most powerful' version, in that it contains all features and options of the Enterprise Edition (expect RAC and Enterprise Manager packs)
As such, the Personal Edition, at a mere USD$400-500 is one of the most cost effective for-fee products that Oracle has in it's inventory. It is targeted at the developer. And it comes with the complete set of Sample Data, whereas XE has a very limited subset (since it does not support all functionality).
Express Edition is indeed free, but it is not supported, and can not be patched. OTOH it does have a lighter footprint.
Again, I am not sure whether Disco 11g is compatible with Express Edition. (It's on my schedule for December ...) -
Installing Oracle Database 11gR2 on Linux with Unbreakable Ente. Kernel
Hello,
I have Oracle Linux 5.5 with Oracle's Unbreakable Enterprise Kernel.
what do I need to have/prepare to install Oracle database 11gR2 on it?
the hardware part and the partitions are done!
1-
Do I need to install/run Oracle Validated Configuration RPM? even if I have Oracle's Unbreakable Enterprise Kernel?
if yes does in means the Oracle's Unbreakable Enterprise Kernel does not prepare/configure the system to host database?
2-
With any of the above
do I still need create or edit the /etc/sysctl.conf file, and add or edit lines similar to the following:
fs.aio-max-nr = 1048576
fs.file-max = 6815744
kernel.shmall = 2097152
kernel.shmmax = 536870912
kernel.shmmni = 4096
kernel.sem = 250 32000 100 128
net.ipv4.ip_local_port_range = 9000 65500
net.core.rmem_default = 262144
net.core.rmem_max = 4194304
net.core.wmem_default = 262144
net.core.wmem_max = 1048586
I saw allot of docs out there, but none answered these questions!
so please do not post docs or links to a general sites!
Thank you for the helpDude wrote:
The intention of Oracle UEK is quite obviously Oracle specific, so I think it is legitimate to ask why not to include the Oracle specific kernel configuration file. The UEK is a drop-in replacement for the existing kernel. Why would we include the oracle-validated configuration options into the kernel package when we already have a perfectly good oracle-validated RPM that can be used with both kernels? Also, the UEK may be Oracle specific, but it's not database specific. Keep in mind that Oracle has thousands and thousands of products. :) I run the UEK on lots and lots of servers, many of which don't run database and many of which have completely different /etc/sysctl.conf configurations.
The list of available packages and add-on's at http://public-yum.oracle.com/repo/OracleLinux/OL5/5/base/x86_64/ is growing. So perhaps it's just a matter of continued development.
Not sure what the point of this statement is: there are no plans to incorporate the oracle-validated configuration into the kernel, as it already exists in oracle-validated. -
Oracle 9i - did not install with SQL Loader
Installed Oracle 9i (standard, personal would not install) on XP home edition but SQL Loader did not come this this and I would like to import to 9i. How can I accomplish this? I can not locate any tools included in the installation.
Thank you!!!I think the SQL Loader do not come with Oracle personal edition, at least it didn't on my 8.0.x personal edition before.
But I think there are few options:
1. You may install Enterprise edition administrator client on the same machine. It comes with some admin tools like sql loader (sqlldr or sometime it may be some different name with different version). Be very careful on versions, if it may conflick with your existing version, you may consider to install to a new Oracle home and make sql net connection to connect your personal edition's home and then sql load.
2. The faster way and the prefered way is to install ODBC driver, use some other Windows application like FoxPro to read a file and insert into Oracle via ODBC.
3. Use Oracle Forms to connect your database and use Text I/O commands to read file and then insert into database.
Hope this help. -
Hello,
Am trying to upgrade a SCOM SP1 environment to SCOM R2( 3 MGT servers, 1 GW and 2 Web console boxes )
The prerequisites are failing and it is stating the following ;
Operational Database SQL Version Check - The installed Version of SQL Server is not supported for the operational database
Data Warehouse SQL Version Check - The installed Version of SQL Server is not supported for the data warehouse
The SQL servers are running SQL 2012 SP1 64 Enterprise, which is compatible.
All other pre-upgrade tasks have been done.
Help appreciated!I'm having the exact same issue, I believe. I think that Tubble has problem with SCOM 2012. Not 2007.
I've checked the compatibility list for both SCOM 2012 SP1 and R2. All newer Windows Server and SQL versions are supported. We're running the SQL 2012 SP1 x64 Standard edition on a Windows Server 2012 Standard.
I even tried to move the database from SQL 2012 to an older SQL 2008 R2, but that's not supported either. Only upgrading. Not downgrading.
So, I started checking the opsMgrSetupWizard.log file for clues. And the error message was there as well. But the reason why it says not supported is that it can't get the info about the OS version, so I guess it assumes the OS version is to low. The RPC
service can not be reached.
[10:29:11]: Error: :GetRemoteOSVersion(): Threw Exception.Type: System.Runtime.InteropServices.COMException, Exception Error Code: 0x800706BA, Exception.Message: The RPC server is unavailable. (Exception from HRESULT: 0x800706BA)
[10:29:11]: Error: :StackTrace: at System.Runtime.InteropServices.Marshal.ThrowExceptionForHRInternal(Int32 errorCode, IntPtr errorInfo)
at System.Management.ManagementScope.InitializeGuts(Object o)
at System.Management.ManagementScope.Initialize()
at System.Management.ManagementObjectSearcher.Initialize()
at System.Management.ManagementObjectSearcher.Get()
at Microsoft.EnterpriseManagement.OperationsManager.Setup.Common.SetupValidationHelpers.GetRemoteOSVersion(String remoteComputer)
[10:29:11]: Debug: :IsSQLOnAValidComputer: remote OS version string was null or empty.
[10:29:11]: Error: :Error:IsValidSQLVersionCheck: SqlServer OS version is too low.
[10:29:11]: Debug: :**************************************************
[10:29:11]: Error: :<![CDATA[CheckPrerequisites: Logic Type:and IsValidOMDBSQLVersionCheck: 2]]>
[10:29:11]: Error: :
[10:29:11]: Error: :CheckPrerequisites: OMDBSqlVersionCheckTitle: Failed
[10:29:11]: Error: :
[10:29:11]: Debug: :**************************************************
[10:29:33]: Error: :GetRemoteOSVersion(): Threw Exception.Type: System.Runtime.InteropServices.COMException, Exception Error Code: 0x800706BA, Exception.Message: The RPC server is unavailable. (Exception from HRESULT: 0x800706BA)
[10:29:33]: Error: :StackTrace: at System.Runtime.InteropServices.Marshal.ThrowExceptionForHRInternal(Int32 errorCode, IntPtr errorInfo)
at System.Management.ManagementScope.InitializeGuts(Object o)
at System.Management.ManagementScope.Initialize()
at System.Management.ManagementObjectSearcher.Initialize()
at System.Management.ManagementObjectSearcher.Get()
at Microsoft.EnterpriseManagement.OperationsManager.Setup.Common.SetupValidationHelpers.GetRemoteOSVersion(String remoteComputer)
[10:29:33]: Debug: :IsSQLOnAValidComputer: remote OS version string was null or empty.
[10:29:33]: Error: :Error:IsValidSQLVersionCheck: SqlServer OS version is too low.
[10:29:33]: Debug: :**************************************************
So, in our case this was just a FW that was blocking some high ports between management server and SQL. I believe TCP port 135 also needs to be open.
Let's hope this fixes your issue as well, Tubble.
Have a great day!
Maybe you are looking for
-
Hi SAP Gurus, I have about 300 reports in front of me. I have to tell my company which reports are in standard SAP FA and which are not. Please help me how can I tell them. Please guide step-by-step. E-mail tang_54(atr) hotmail.com
-
PDF form problem in web dynpro
Hello Everybody, I have some problem with PDF form in web dynpro application. I have used T layout view set. On top view i put one image. On left view i have tree element. On right side i have all other elements. Right side, different views are displ
-
WILL NOT ALLOW ME TO DOWNLOAD A MOVIE THAT I HAVE A DIGITAL COPY FOR IT GIVES ME A MESSAGE about purchasing a hd version vs the sd version
-
Hi Gurus, I would like to know if this is mandatory to send the material that is needed to repack to storage type 923 - PACK.BIN. For example: I have a pallet (SU) with 10 boxes on it (HU) stored in a storage type with putaway strategy, capacity chec
-
DATAEXPORT file in custom defined Order?
Hi , I had a requirement to export Lev0 (Dynamic Calc) data from BSO application. I am able to do the export by using "DATAEXPORT" function, but the export file contain the default order as per dimensions design from outline. I am pretty sure that i