Install - with these easy to use install instructions (required) - Error404

On the page http://www.oracle.com/technology/products/ias/bpel/techpreview/index.html the install instructions are not available (error 404).
On the page http://www.oracle.com/technology/products/jdev/11/index.html you can get the install Guide & Release notes
Question : Are the "install instructions" the same as "Install Guide"?

Hi Heidi,
The links to "install instructions" and the "Hello world" have the same endpoint? Is this correct?
If this is correct, it is working fine!
Thnx
Jan

Similar Messages

[Resolved with iDesk] Easy to use & setup icon display program

On my desktop machine, I do some gaming and when I do that I use fluxbox as my WM so that my resources are not consumed by the DE or WM I'm running in the background. I've recently figured out how to use some utilities to be used in conjunction with fluxbox, IE fme (a fluxbox menu editing utility) and mmenu (menu generator). I'm still trying to get fluxter to work though. As an aside, my thanks to AUR & the people who uploaded these programs.
I realised not long ago that I'd like icons on my fluxbox desktop too, just so I don't have to go through menus when invariably I only end up using the same 2 or 3 programs in a session of gaming. I acquired fbdesk but so far have had no luck in getting it to work properly. I wondered at that point if others have made their fluxbox or openbox or other minimalist wm functional with icons. If you have, would you please post which program(s) you used and perhaps give me an idea of whether it is easy to use or if it requires some amount of advanced scripting knowledge.
Thank you
MS
Last edited by MoonSwan (2008-02-25 21:32:09)

I'd found iDesk and I apologise for not mentioning it in my first post. I was hoping there might be another alternative I'd not found yet but if not, then I think I shall take your suggestion & use iDesk.
I'll mark this solved unless someone else comes along and posts about a program other than fbdesk iDesk.

I have some apps on my iPad that were installed using an old apple ID. They can't be updated because the old ID is no longer valid. How can I change the apple ID associated with these apps?

I installed some apps using an apple I'd that is no longer active. I can't update them because it asks for the password of the old I'd instead of the I'd I currently use. How can I change the apple I'd associated with these apps? I still want to use them. One app I paid for using the old I'd. The other app is free. I have already tried deleting them and reinstalling them.

If you simply just changed the email associated with that appleid you can just delete and Re-download the apps.
You can verify the above step by going to the App Store on device > Updates>Purchased - if you see the app there just delete it from the home screen and redownload from the purchased section
Now if you got rid of that account entirely, you will have to delete and re-purchase on your new account

I want to sync my ipod with itunes but it says the ipod cannot be used because the required software is not installed. run the itunes installer to remove itunes, the reinstall itunes again. i have done as instructed few times but still persists.

i want to sync my ipod with itunes but it says the ipod cannot be used because the required software is not installed. run the itunes installer to remove itunes, the reinstall itunes again. i have done as instructed few times but still persists.

Success!
By completely removing all reference to apple or iTunes/iPod/ Safari etc from my computer, it has at last installed.

I find using the iPhone / iPod size virtual keypad much easier to use with a stylus...as when an iPhone app is installed on the iPad. Anyway to use the iPhone size keypad with all apps?

I find using the iPhone / iPod size virtual keypad much easier to use with a stylus...as when an iPhone app is installed on the iPad. Anyway to use the iPhone size keypad with all apps?

I don't want the keyboard to become bigger. Wish there was a way to always have the iPhone sized keypad available for use with any app. When typing with fingers or stylus, the distance between keystrokes is SO much shorter and efficent on the iPhone keypad vs the "full size" iPad keyboard.
I've heard that there will be some keyboard options when the new IOS comes out...wish this was one of them.
Haven't looked yet, but is there a place you can recommend things such as this to Apple?
Thanks.

I am having trouble setting up icloud it keeps sending me back to install instructions and I'm just getting frustrated. So far I'm not liking the new itunes I can't figure out how to look at my duplicate music like I used to.

I can't sign on to icloud. It says I need an icloud account. I click the help option it send me back to the same page. I reinstall it nothing.
Download the iCloud Control Panel.
To enable iCloud on your Windows PC, first set up iCloud on your other devices, then install the iCloud Control Panel for Windows (Windows Vista with Service Pack 2 or Windows 7 required).
ok I can't seem to set up iCloud on any device I don't understand... Ive already installed it three times.
Turn on iCloud.
From the Windows Start menu, choose iCloud Control Panel.
Enter the Apple ID you used to create your iCloud account and select the iCloud services you’d like to enable.
For mail, contacts, and calendars, you can use iCloud.com or Outlook 2007 or later.
there is no iCloud control panel but I click on i cloud. Then entere the Apple ID you used to create your iCloud account - WHAT!!!!? where is this I keep trying to find out how to create and iCloud account but I keep getting these stupid directions!!!
Enable automatic downloads.
To enable automatic downloads for your music, apps, and books, open iTunes > Edit > Preferences > Store and select Music, Apps, and Books.* (Requires iTunes 10.5 or later.)
- This is the only step that makes sense and already did it...
Turn on iCloud for the rest of your devices.
To get the most out of iCloud, set it up everywhere.
This is soooo frustrating!!!!
Also I want to be able to look at duplicate songs on my itunes but after I downloaded the new version I can not figure out how to get that back. If the duplicate setting isn't in the new itunes I want the old version back.

Did you ever resolve the iCloud problem.I am in the same position and its driving me mad!!! If you have a link to an solution I would appreciate it.

TS1926 "Monitors cannot be used bcz a required extension, System Monitor Plugins, is disabled or not installed. Make sure System Monitor Plugins is in the Extensions folder in the System folder then restart your computer" Anyone have experience with this

"Monitors cannot be used bcz a required extension, System Monitor Plugins, is disabled or not installed. Make sure System Monitor Plugins is in the Extensions folder in the System folder then restart your computer" Anyone have experience with this issue?

Try this app: http://tyorex.com/iWorkConverter
Batch convert Pages files to doc and pdf.

This ipod cannot be used because the required software is not installed. Run the Itunes installer to remove Itunes, then install the 64-bit version of Itunes.

I'm not sure if the error message is related but smart friend was using my computer started deleting Quicktime & Safari and told me that they shouldn't be on my computer as they are not windows product & I can't use them on my laptop. With trepidation but acknowledging I don't know any of the stuff they were talking about, I allowed them to raid my laptop thinking it could be for the best. Now I'm not sure if it is related or not but depsite me having the most recent Itunes updates on both my Ipod 4TH GT, I am getting the following message everytime I connect my Ipod to the computer...and the timing would be about right too:
this ipod cannot be used because the required software is not installed. Run the Itunes installer to remove Itunes, then install the 64-bit version of Itunes.
If it helps I am running the 10.7.0.21 on the Sony Vaio & remember checking last week I do have the latest update on the Ipod but it is a different version from the Itunes on the laptop (which may be normal, I wouldn't know) but as I am away from home & Wifi I can't tell u the version on that though.
My problem is I cannot find an apple installer on the laptop to uninstall & I have searched Apple & Google for help and have seen others posts with the same issue but alot of the answers unfortunately I can't follow. I would greatly appreciate it if you can you answer any of these questions for me?
*Will add & remove totally uninstall Itunes so that I can reinstall?
*Will I lose my apps, music & data?
*If the apps, music & data is recoverable, how do I do that?
Sadly I can't find the installer & would love to add my new Mumford & Sons cd to my Ipod collection but don't know how to fix this. I love my Ipod & google but I have spent hours tryign updates, downloads, searches & feedback to Apple. A few months ago I had an Itunes billing problem & there was a webpage where you could email an apple support worker & rhe replied to my credit card problem within a day or 2 but I can't find that help for this problem..I couldn't express my graditude enough if you could help me with this, but thank you.

dorygirl2009 wrote:
I'm not sure if the error message is related but smart friend was using my computer started deleting Quicktime & Safari and told me that they shouldn't be on my computer as they are not windows product & I can't use them on my laptop.
This "smart friend" really sounds like a collosal moron.
Follow the instructions here: http://support.apple.com/kb/HT1925 to remove and reinstall all Apple products on your computer.
Once you get everything working, the next time your "smart friend" wants to touch your computer, tell them firmly NOT A CHANCE IN ****!
None of your data (media, podcasts, apps) will be affected by removing and reinstalling iTunes.

This iPad cannot be used because the required software is not installed. Run the iTunes installer to remove iTunes then install the 64-bit version of iTunes

I have seen others post this same question but the answers provided does not resolve my problem. My iPad Air is running iOS 7.1.2. I have been using this same computer for three years. It has Windows 7 home premium, service pack 1, 64-bit Operating System, Intel 3.4GHZ computer and 16.0 GB . I used this same computer with my iPad2 for several years. I purchased an iPad Air a year ago. I never had a problem with either iPad using iTunes. About a week ago, my computer would no longer recognize the iPad Air. I thought it must be a driver problem or iTunes somehow became corrupted. I uninstalled all of the Apple products except for iCloud and deleted any Apple software left in my Program Files and Program Files (x86). I then downloaded from Apple, iTunes64Setup.exe which is a 110,833 KB program. I installed the program without a problem. It installed Bonjour, Apple Software Update, Apple Application Support and iTunes. These programs I had previously uninstalled. I then brought up iTunes. I now plugged in my iPad Air and a popup message appeared "This iPad cannot be used because the required software is not installed. Run the iTunes installer to remove iTunes then install the 64-bit version of iTunes". OK, I did as instructed. I used the iTunes installer to remove iTunes then ran iTunes64Setup.exe. I brought up iTunes and got the same message. "This iPad cannot be used because the required software is nt installed. Run the iTunes installer to remove iTunes then install the 64-bit version of iTunes" In general, I have found the Apple software to be robust and reliable. This situation however is very disappointing. I am hoping that someone has an answer that I can use to resolve my problem.

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it, which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
The section Install missing components has advice on breaking down the iTunes installer into the individual .msi files which might prove useful if one component, such as Apple Mobile Device Support, won't install normally.
In your case I suggest you start with a clean download of the setup file using the direct link. If reinstalling AMDS alone doesn't work try tearing everything down again.
tt2

Everytime I connect my iPod to USB, iTunes says the following: This iPod cannot be used because the required software is not installed. Run the iTunes installer to remove iTunes, then install the 64-bit version of iTunes.

I have the latest 64-bit version of iTunes on Windows 7 Ultimate. Everything was fine until recently. Now when I connect my iPod Touch to the USB to sync with iTunes, I get the following message: "This iPod cannot be used because the required software is not installed. Run the iTunes installer to remove iTunes, then install the 64-bit version of iTunes" I have removed, repaired, and installed the 64-bit version numerous times as well as disabled all antivirus / adware utilities. Same message appears when I plug in my iPod. Any help would be greatly appreciated.

Did you try removing and reinstalling all the Apple software using these instructions:
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7

ITunes says that my iPod cannot be used because the required software is not installed. Says to install 64-bit version. Problem is 64-bit version is installed already.

I have a 64 GB iPod operating on iOS 5.1.1 (says software is up to date). I finally was able to download iTunes 64 Bit to my computer and open it. Now when I connect my iPod to the computer, I get a message saying "This iPod cannot be used because the required software is not installed. Tun the iTunes installer to remove iTunes, then install the 64-bit version of iTunes." I have removed iTunes from my computer and downloaded the 64-bit version again and installed it. I still get the same message.

Hi antiklady,
I see that you may be having an issue with compatibility of iTunes when connecting your iOS device. This sort of issue can arise if you have two versions of iTunes installed on your computer, which I feel may be the case. Here is an article that can tell you how to identify the version of iTunes that you have open:
iTunes: How to find which version you are using - Apple Support
http://support.apple.com/en-us/HT201521
If the version of iTunes that is opened is not the version you are required to use for the iOS device in question, try searching through your computer or applications folder to see if there may be two versions of iTunes installed on your computer. Then, uninstall the version that is incompatible using these steps:
Remove and reinstall iTunes and related software components for Windows Vista, Windows 7, or Windows 8 - Apple Support
http://support.apple.com/en-us/HT1923
Take care, and thanks for visiting the Apple Support Communities.
-Braden

"This iPhone cannot be used because the required software is not installed"

Greetings,
I have a problem with my newly purchased iPhone 3G - iTunes will not recognize it, stating that "This iPhone cannot be used because the required software is not installed". Uninstall and reinstall iTunes, it says. I've done that several times, following the instructions for removal here: http://docs.info.apple.com/article.html?artnum=93698
Not working. The iPhone is recognized in Windows, and both the Apple Mobile Device and iPod services are running. I'm running out of options here - I managed to activate the iPhone on another computer, but I need to sync it with my own computer to make it usable.
I am running 32-bit Vista SP1 (fully updated) on a Travelmate 8200 laptop. iTunes version is the latest, obtained from Apple.
Any help would be greatly appreciated, my hair is turning gray over this.

If it were me, I'd make sure to uninstall all 4 of those services mentioned in that link you provided. Then make sure you've downloaded the iTunes package from this link http://www.apple.com/itunes/download/
Make sure you install, and keep installed, everything in that package. In other words don't uninstall anything that the package installs. I don't know this for a fact, but I'm pretty sure that at the very least your system will need both iTunes (most recent version) and QuickTime in order for the new 3G phone to function properly. If you download from the link provided above, you should get the latest version of iTunes and QuickTime. Hope this helps.
Wooops, . If your location requires you to download from another link, then by all means go to it. I just noticed that you're from Sweeden.
Message was edited by: QuickDraw

Silent install instructions for Photoshop Elements 8 (AOO volume license version on Windows)

Hello,
Does anyone know if the silent installation of Photoshop Elements 8 works the same way the versions 6/7 work? I can't find any article in the support site that states that is does...
Thanks in advance for answering this question.
Joost Brenters
Gemeente 's-Hertogenbosch
The Netherlands

Since in the silent install EULA is never accepted and user has not specified any country value, hence I don't believe you will be able to get away from seeing these two dialogs. For registration dialog, there is a way to suppress it during silent install.
You can send a private message to Aanchal and hopefully, she will get back to you with more information.
You are correct, silent install instructions for PSE 7 wont work for PSE 8.
Regards,
Ankush

This phone cannot be used because the required software is not installed. i have installed and re installed the program and every time i plug my iphone 6 in the same message pops up

this phone cannot be used because the required software is not installed. i have installed and re installed the program and every time i plug my iphone 6 in the same message pops up

Have managed to cure it based upon the following information received -
I keep having this problem with iTunes when I try to connect my iPod Touch to iTunes. I keep getting this error message: "This iPod cannot be used because the required software is not installed".
What I did:
Run the iTunes installer to remove iTunes, then install the 64-bit version of iTunes.
I have already done this required step about a hundred times and I am still getting this same error so if you have any idea of what I can do please help.
Solution
I was running the 64-bit version if iTunes, and I did uninstall and re-install just to make sure -- no luck. Turns out there's a really easy solution, I'll spare you the detail of how I figured it out, but if you encounter the same issue, here's the solution:
1) Using WinRAR (or any other decent archiving program), extract iTunesWindows64Setup.exe
2) Right click on AppleMobileDeviceSupport64.msi and choose Properties.
3) Switch to the Compatibility tab and check the "Run this program in compatibility mode for:" box, and select your only option, "Previous versions of Windows", in the drop-down box.
4) Click OK
5) Double click the AppleMobileDeviceSupport64.msi
6) Tell it to Repair your current installation
7) Done!

Creating a package from Github source and install instructions

hello
I've read that the correct way to install things is to make a package from source if it's not in a repository.
Install instructions: https://github.com/yaxu/Tidal/blob/mast … l-linux.md
I copied /usr/share/pacman/PKGBUILD.proto into the source directory but was having difficulty getting it to work.
I've actually just done make clean; make like it says in the instructions since I was thinking it's not installing anything (since it's not "make install").
It seems to have changed a few things in /usr/local/include...
I guess I'd like help creating the package,
and possibly undoing what I did with make clean; make.
Thanks

Tidal itself does not have a Makefile (except for its docs), so I suppose you’re talking about Dirt’s makefile. From what I can see it shouldn’t touch /usr/local/include or anything outside the build directory as long as you don’t run “make install”.
Arch doesn’t put anything in /usr/local anyway, as far as I know, so you can probably easily see if Tidal or Dirt put something in there…
It might be easier for you to first build Dirt and Tidal manually and then make a PKGBUILD once you know the different steps required.

Install - with these easy to use install instructions (required) - Error404

Similar Messages

Maybe you are looking for