Install Wizard doesn't start

I have tried installing Sun Java Studio Creator 2.0 Update 1 on both my Windows Vista and Windows XP Professional machines.
Issue:
On the machines a window appears that says "Preparing Java(tm) Virtual Machine"..., then says "Running InstallShield Wizard...". The installation then stops and nothing further happens, Wizard doesn't starts.
Systems and system variables used:
The Vista machine has 1 GB RAM, XP machine has 768 MB RAM.
I can see no problems with firewalls on either machine.
The installation file also seems to have downloaded completely.
Can someone please help??!!?? :-D

Do you have any other versions of creator already installed ? If so, try uninstalling those first. Here are the FAQs on installing creator which might help:
http://developers.sun.com/jscreator/reference/faqs/index.jsp
In particular check the FAQ:
My installation of Java Studio Creator 2 Update 1 may not have completed successfully on Windows 2000 or XP. How should I proceed?

Similar Messages

The Wizard doesn´t start ("Bad version number in .class file")

Hi,
I have done the steps from Adobe´s web to install the plugin and dependences... But when i try to start the wizard i have this problem:
"The selected wizard could not be started.
Plug-in com.adobe.livecycle.cde was unable to load class com.adobe.livecycle.cde.wizard.CdeWizard.
Bad version number in .class file"
Thanks

Thanks for reply nothing

SAP Connector Proxy Wizard doesn't start

Hi all,
I've just installed VS2003, the SAP .NET connector and the .net framework (1.1) on a freshly installed Windows XP pro machine. If I follow the various tutorials on the web I should be able to create a SAP proxy when doing the following:
- start VS2003
- create a new Windows Application (in C#)
- Add a SAP Connector Proxy
-- A wizard starts
And that is were it starts to go wrong. Instead of a wizard, I get the following:
<?xml version="1.0" encoding="utf-8" ?>
<wsdl:definitions targetNamespace="urn:sap-com:document:sap:rfc:functions" xmlns:s0="urn:sap-com:document:sap:rfc:functions" xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/">
<wsdl:types>
    <xsd:schema targetNamespace="urn:sap-com:document:sap:rfc:functions" xmlns:s0="urn:sap-com:document:sap:rfc:functions" xmlns:xsd="http://www.w3.org/2001/XMLSchema"></xsd:schema>
</wsdl:types>
<wsdl:portType name="dummy.PortType"></wsdl:portType>
<wsdl:binding name="dummy.SAPBinding" type="s0:dummy.PortType" xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/">
    <s0:binding style="rfc" />
    <wiz:GeneratorSettings xmlns:wiz="urn:sap:mw:dotnet:wizard">
      <wiz:ProxyType>Client</wiz:ProxyType>
      <wiz:ClassName>SAPProxy1</wiz:ClassName>
      <wiz:Beautify>True</wiz:Beautify>
      <wiz:CreateAsyncs>False</wiz:CreateAsyncs>
      <wiz:CreateQRFC>False</wiz:CreateQRFC>
      <wiz:CreateTRFC>False</wiz:CreateTRFC>
    </wiz:GeneratorSettings>
</wsdl:binding>
<wsdl:binding name="dummy.Binding" type="s0:dummy.PortType" xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/">
    <soap:binding style="document" transport="http://schemas.xmlsoap.org/soap/http" xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/" />
</wsdl:binding>
</wsdl:definitions>
Does anyone know what could be wrong here?
Thank you and kind regards,
Thomas

Hi Thomas,
With the newer version of NCo (> 2.0) there is no wizard. You would have to drag and drop the RFC/BAPI from the server explorer window of visual studio.
First open the solution explorer, click on the SAP icon. Specify the credentials. And then from the list of RFC/BAPI drag and drop on SAP connector proxy page(design view). You can also specify the filter to restrict the listing of RFC/BAPI.
Regards.

MDT Deployment Wizard doesn't start after booting from the LiteTouchPE.iso

Hello Experts,
I'm using the MDT 2013. When I boot the Physical machine or VM with the LiteTouchPEx86 or x64, I'm not getting the Deployment Wizard. It just stops with a command prompt X:\Windows\System32>. Anyone faced this problem earlier. I searched the Technet, but
I couldn't find any solutions.
I've done all the possible things which I know. Please help.
Regards,
Sukumar. R.

You are getting some kind of crash, or your variables are not setup correctly.
From the command prompt (X:\Windows\System32 ) Run the following command and let us know what the error message is (exactly):
cscript x:\deploy\scripts\litetouch.wsf /debug:true /debugcapture
It should crash or exit with error error. If it does not crash with a specific line number, then please copy the bdd.log file to a public site like OneDrive and copy the link here.
Keith Garner - Principal Consultant [owner] -
http://DeploymentLive.com

Install cd won't start

Hi
I have a friend with a HP laptop. He tried to intall arch linux (it took a year to convince him), but the install cd doesn't start, it is just spinning and spinning and nothing happens. He did a bios upgrade recently, before he installed windows7. Last year he had Kubuntu on his laptop.
Next he tried opensuse, but the situation is the same.
He's never been able to boot from usb, so he is using optical disk.
I suggested to make a Load default in bios or downgrade bios, but method failed. Any idea?

Thank for all the suggestions. Unfortunately it's not only the arch linux image but opensuse install failed as well, however he managed to install windows 7. So it's probably not disk, odd or iso image problem.
The only thing I can think of the he tries to insert the disk upside down. Or similar

DBConsole Service doesn't start after Install OAS F&R-Services Win 10g

Windows DBConsole Service doesn't start after Install OAS F&R-Services
Hello,
we have installed:
WINDOWS Server 2003 with SP 2
Oracle 10.2.0.1
OAS F&R Services 10.1.2.0.2
after Install DBR2 EM / DBConsole did work
after Install OAS F&R-Service
the windows-service for DBConsole
doesn't start, return with an Error Code 2
see below
the file named emdbconsole.nohup from output log
is not to find
the ias_console does work fine
OAS F_R-Services do work too
whats may be wrong ?
regards
Norbert
OracleDBConsoleorclsrvc.log :
EMDROOT=D:\oracle\product\10.2.0\db_1
ORACLE_HOME=D:\oracle\product\10.2.0\db_1
EMDSTATE=D:\oracle\product\10.2.0\db_1\kfin_orcl
CONSOLE_CFG=dbconsole
TRACE_LEVEL=16
TIMEOUT=15
12/14/09 13:13:08 Start pending...
12/14/09 13:13:08 Verifying dbconsole is not started already. Command line "D:\oracle\product\10.2.0\db_1\bin\emctl.bat" istatus dbconsole
12/14/09 13:13:09 dbconsole launch commandline is "D:\oracle\product\10.2.0\db_1\bin\emctl.bat" istart dbconsole
12/14/09 13:13:09 Tracking process launch...
12/14/09 13:13:39 dbconsole exited with retCode 2.
12/14/09 13:13:39 Check D:\oracle\product\10.2.0\db_1\kfin_orcl\sysman\log\emdbconsole.nohup for details
Edited by: astramare on Dec 15, 2009 8:43 AM

Hi,
1. Stop the DBConsole. (set ORACLE_SID first & ORACLE_HOME)
cd %ORACLE_HOME%\bin
emctl stop dbconsole
2. Update the <ORACLE_HOME>/<hostname_sid>/sysman/config/emd.properties file.
Change line from:
tracelevel.main=WARN
To
tracelevel.main=DEBUG
Decomment this line, so that the line becomes :
EMAGENT_PERL_TRACE_LEVEL=DEBUG
3. Update the <ORACLE__HOME>/<hostname_sid>/sysman/config/emomslogging.properties
Change line from:
log4j.rootCategory=WARN, emlogAppender, emtrcAppender
To
log4j.rootCategory=DEBUG, emlogAppender, emtrcAppender
4. Remove/backup all log files from ORACLE_HOME/<hostname_sid>/sysman/log
5. Start the dbconsole and upload the output of each command
- start the dbconsole: "emctl start dbconsole"
- issue "emctl clearstate"
- status the dbconsole: "emctl status dbconsole"
- check the status of the agent until it comes up: "emctl status agent"
- force an upload: emctl upload
6. Check If you are able to view the dbconsole Page & login
check below logs may be you can see the close error messages to solve the issue.
<ORACLE_HOME>/<hostname_sid>/sysman/log directory
<ORACLE_HOME>/<hostname_sid>/sysman/config/emoms.properties
Otherwise re-create the DBconsole using the metalink doc 278100.1 : How To Drop, Create And Recreate DB Control In A 10g Database. (Please check the steps from Recreate/ReConfig DB Control, if you want to re-create)
Thanks.

HTTP Server Doesn't Start after install

I just completed an install of the 10.1.3.1 Oracle App Server. It indicated that the install was successful. I can see in the log the BPEL Manager deploying in the default domain, but I do not see any reference to the HTTP server. Also, when I do a *./opmnctl startall* there is no HTTP_Server~1.log created.
Is there a step I need to complete to enable the Apache server to start? I must be missing something - the Apache folder is there in the install folder.
The *./opmnctl status* reports:
Processes in Instance: AS02.ssg-st-bpel-build0-dev.vzbi.com
---------------------------------+--------------------+---------+---------
ias-component                    | process-type       |     pid | status
---------------------------------+--------------------+---------+---------
OC4JGroup:default_group          | OC4J:home          |   18970 | Alive
ASG                              | ASG                |     N/A | DownI found the following in the installActions log:
Install type for "Oracle HTTP Server 10.1.3.0.0 " is "Typical".
# Not all the dependencies for the component Oracle HTTP Server 10.1.3.0.0 could be found. Missing component oracle.bc4j 10.1.2.0.0.
# Not all the dependencies for the component Oracle HTTP Server 10.1.3.0.0 could be found. Missing component oracle.bc4j.oem 10.1.2.0.0.
# Not all the dependencies for the component Oracle HTTP Server 10.1.3.0.0 could be found. Missing component oracle.soap.srv 2.2.0.0.2a.
# Not all the dependencies for the component Oracle HTTP Server 10.1.3.0.0 could be found. Missing component oracle.apache.ejb 9.0.1.0.1.
# Not all the dependencies for the component Oracle HTTP Server 10.1.3.0.0 could be found. Missing component oracle.apache.ojsp 10.1.2.0.0.
     Conflict while setting install type of "Oracle Process Management Notification 10.1.3.1.0 " to "Typical (Typical)". Install type already set to "Complete (Complete)". Seting it to "Custom (Custom)".
# Not all the dependencies for the component Oracle HTTP Server 10.1.3.0.0 could be found. Missing component oracle.dcm 10.1.2.0.0.
# Not all the dependencies for the component Oracle HTTP Server 10.1.3.0.0 could be found. Missing component oracle.sysman.emd 10.0.2.0.0.
# Not all the dependencies for the component Oracle HTTP Server 10.1.3.0.0 could be found. Missing component oracle.java.j2ee.iascfg 10.1.2.0.0.
# Not all the dependencies for the component Oracle HTTP Server 10.1.3.0.0 could be found. Missing component oracle.logloader 10.1.2.0.0.
# Not all the dependencies for the component Oracle HTTP Server 10.1.3.0.0 could be found. Missing component oracle.webdb.monitor 10.1.2.0.0.
What am I missing? Is there a package I need to install before installing the App Server?
Edited by: BCurtis on Sep 24, 2010 3:22 PM
Edited by: BCurtis on Sep 24, 2010 3:25 PM

I now know I'm missing the <ias-component id="HTTP_Server"> in the opmn.xml file. The following is from an older install of a few years ago.
         <ias-component id="HTTP_Server">
            <process-type id="HTTP_Server" module-id="OHS">
               <module-data>
                  <category id="start-parameters">
                     <data id="start-mode" value="ssl-enabled"/>
                  </category>
               </module-data>
               <process-set id="HTTP_Server" numprocs="1"/>
            </process-type>
         </ias-component>This explains why the startall doesn't start the HTTP Server, but why would the install not include the HTTP Server in the configuration?

Windows 7 64-bit 8GB RAM doesn't start after installing X-Fi drivers

I have Windows 7 64 bit, 8GB RAM for a few months. After inserting an X-Fi Platinum Fatalty Champion Series (S/N MASB046A83R0772D; OP BN 06SB046A00005 Rev A) and installing Creative Sound Blaster X-Fi series driver 2.8.003 dated 26 Jun 09. The sounds plays OK, but after rebooting Windows doesn't start, with a CorruptRegistry error. I have installed Windows from scratch, but it only works until I install the X-Fi driver and reboot. Please help. I have searched the internet and found no solution to my problem besides a Wikipedia article that X-Fi has problem with 64-bit Vista with 4GB RAM or more.

Hi, I am also running windows 7 ultimate 64 with the same sound card and am using the july 5 driver. It works but i cant use the creative control panel as i get a black screen on start-up and when i uninstall the contol panel windows functions normally. I may have to go with the onboard sound to get all 4 speakers to work. I have 6 Gb of ram on a gigabyte X58 Mobo.

HT1349 hi ,i just got a Parallels desktop 7 and i try to install it but the cd doesn't start when its inserted.how can i solve this? the macbook pro i just got it few days back so its the last version..thx

hi ,i just got a Parallels desktop 7 and i try to install it but the cd doesn't start when its inserted.how can i solve this? the macbook pro i just got it few days back so its the last version..thx

Hi,just now i open it with finder and it started downloading!!!
Thank you,very new to mac:)

I just updated my itune on my PC and now it doesn't start. There was no error in installing/upgrading the software but once I rebut the computer the icon appeared but it wouldn't start the program. Did I loose all my music and data?\

I just updated my itune on my PC and now it doesn't start. There was no error in installing/upgrading the software but once I rebut the computer the icon appeared but it wouldn't start the program. Did I loose all my music and data? How can I fix the problem? Thanks

Try this from MacFixIt as well:
In the case of drive directory damage or problems with permissions, the solution is usually to use Apple's Disk Utility to repair the disk. Of course, you won't be able to perform this operation normally (simply launching the Disk Utility application, located in Applications/Utilities, and initiating a disk repair) if your system will not startup. So two options exist:
* Insert your Mac OS X 10.4.x (Tiger) media (DVD or CD) and restart the computer while holding down the "C" key. Once the computer has booted from the installation disc, select "Utilities" from the menubar and open Disk Utility. Repair the disk, then quit Disk Utility and restart your system.
* Alternatively, you can repair the disk while booted in single user mode if you do not have access to a retail Mac OS X 10.4.x (Tiger) DVD/CD. To startup in single user mode, hold down the "Command" and "S" keys simultaneously at startup. Once properly booted, type the command fsck at the prompt. Repeat these process until no errors appear.

My mbp 15 retina doesn't start up, i tried to install Windows using bootcamp but it didn't work well

I tried to install windows 7 using bootcamp, i did every steps, when the installation of the windows started i selected the partition created by bootcamp but it didn't install because it said that maybe something was corrupted, then i quit the installation but now my mac doesn't start up, the screen gets black and it says: no bootable device -- insert boot disk and press any key.
I try to press alt/option when it starts but nothing occurs. I don't know what is going on, i really need to use it urgently, i hope i won't loose my data. Well i hope someone could help me!!

Do not install MacKeeper:
https://discussions.apple.com/docs/DOC-3026
(Please note that references to the original developers, Zeobit, should now refer to Kromtech Alliance Corp, who acquired MacKeeper and PCKeeper from ZeoBit LLC in early 2013.

LastPass password manager doesn't work with latest Firefox after downloading add-in, installing it and re-starting Firefox.

I'm using FireFox 20.0. I downloaded the add-in, installed it and re-started FireFox but LastPass doesn't show up in the add-ins nor does it fill in the login info on sites that I have in my LastPass vault.

What I've done is make LastPass my home site so when I launch FireFox, I log into LastPass and leave the LastPass vault page in an open tab. Then when I log into another site which requires a login and password which I've previously set up in LastPass, LastPass logs me into that site automatically. LastPass is a free password manager that works well in IE. Any time LastPass detects a login page, it enables you to set up the password and ID in its database and fills in the login info at future login prompts. My solution for FireFox is a bit clunky but when I need to use a second browser, it works.

Report service doesn't start after installing 9iAS

Forms are fine after installing 9iAS, but report server doesn't
start, and is not listed in Control Panel, Services.
If I try start it as RWMTS60.exe -install oracledev2 tcpip I got
the error "Please consult the installation guides for how to set
up and run this program", if I start it as RWMTS60.exe -listen
oracledev2 I got the error "Rep 0001:Unable to find the report
builder message file. Please verify your installation". Attempt
to run any Reports product (Runtime, for instance) causes
Dr.Watson on RWRUN60.exe. The registry parameter RW60 points to
the ORACLE_HOME/report60 for the Reports Server that is failing.
What do I do to start Reports ?
Thank you,
Kate

Hi,
1. Stop the DBConsole. (set ORACLE_SID first & ORACLE_HOME)
cd %ORACLE_HOME%\bin
emctl stop dbconsole
2. Update the <ORACLE_HOME>/<hostname_sid>/sysman/config/emd.properties file.
Change line from:
tracelevel.main=WARN
To
tracelevel.main=DEBUG
Decomment this line, so that the line becomes :
EMAGENT_PERL_TRACE_LEVEL=DEBUG
3. Update the <ORACLE__HOME>/<hostname_sid>/sysman/config/emomslogging.properties
Change line from:
log4j.rootCategory=WARN, emlogAppender, emtrcAppender
To
log4j.rootCategory=DEBUG, emlogAppender, emtrcAppender
4. Remove/backup all log files from ORACLE_HOME/<hostname_sid>/sysman/log
5. Start the dbconsole and upload the output of each command
- start the dbconsole: "emctl start dbconsole"
- issue "emctl clearstate"
- status the dbconsole: "emctl status dbconsole"
- check the status of the agent until it comes up: "emctl status agent"
- force an upload: emctl upload
6. Check If you are able to view the dbconsole Page & login
check below logs may be you can see the close error messages to solve the issue.
<ORACLE_HOME>/<hostname_sid>/sysman/log directory
<ORACLE_HOME>/<hostname_sid>/sysman/config/emoms.properties
Otherwise re-create the DBconsole using the metalink doc 278100.1 : How To Drop, Create And Recreate DB Control In A 10g Database. (Please check the steps from Recreate/ReConfig DB Control, if you want to re-create)
Thanks.

Telepresence Conductor Install Wizard Not Starting.

Hello all,
So I am trying to get an instance of Telepresence Conductor running in my environment. I have deployed the .ova for both 3.0.2 and 2.4.1 on different ESX Hosts but regardless of the version or host when the appliance boots up and I log in with the default user and password it goes straight to the # prompt. I never get prompted with the install wizard.
Anyone have any suggestions? Is there a command to start the wizard manually?

If you're getting a # sign and not a prompt for the configuration wizard, it sounds like you've logged in under the root account. Can you provide a screenshot to verify?
You should be logging in with username "admin", and password "TANDBERG" if this is brand new deployment.

My newly installed Forms 9i_02 doesn't start

Hello,
I wanted to start my Forms 9i, but it doesn't start.
I already uninstalled Forms (and the whole development suite, as you can't uninstall only Forms), but still it doesn't work.
I see the startup screen, but than Forms just quits
Can anybody help?
Bastiaan

This is the new gimmick Oracle have added Javazing the forms & reports,you need to start OC4J instance before you can run forms & the command window of OC4J needs to be minimized till you quit forms.You will find OC4J Start & Stop the same place you find Formbuilder in StartMenu>>Programs>>Oracle 9iDS

Install Wizard doesn't start

Similar Messages

Maybe you are looking for