Install WL6 on Solaris 8 Intel IA

# set LAX_DEBUG = true
# export LAX_DEBUG
# sh weblogic600sp1_sol.bin -i console
Preparing to install...
Error: can't find libjava.so.
Thanks for the help!
-Roger

Sorry, but this is the only message I see in this thread. You got
Weblogic to work on x86 Solaris?
Roger Kovack wrote:
# set LAX_DEBUG = true
# export LAX_DEBUG
# sh weblogic600sp1_sol.bin -i console
Preparing to install...
Error: can't find libjava.so.
Thanks for the help!
-Roger

Similar Messages

  • Can you install 9i on Solaris Intel ?

    Can you install Oracle 9i on Solaris Intel ? 32 / 64 bit

    Hello dear people,
    I'm trying to install the 9i Database for Sun SPARC (32-bit) on an Intel machine with Solaris 8 running. I followed all steps of the installation documentation, but when I try to execute the runInstaller programm, I get always the following error:
    Syntax error at row 1: '(' unexpected.
    Can you tell me, which is actually the terminal Release for Intel Solaris? I were very pleased.
    Thanks,
    Reinaldo

  • Install Oracle on Solaris Intel

    I have purchased Oracle8i Enterprise Edition, Release 2(8.1.6) for Intel Unix(Solaris Intel), and have installed successfully. However, as soon as I shut down and reboot the machine, I can connect to sqlplus
    internal, but I cannot log into the database as "sys".
    The procedure I did is as following:
    Immediately after the installation (message says "installation successful"),
    1. Log in as user "oracle" in the Bourne shell.
    2. At the $ prompt, type "sqlplus internal"
    3. It come out with SQL prompt
    4. SQL> show user ( I typed show user under SQL prompt)
    5. Then it return "sys"
    Things seemed to work fine at that point.
    But, when I shut down and reboot the machine and logon again, and follow the same steps 1-5 as above, it did not work. When I did the "show user" command at SQL prompt, the user is not "sys", instead it returned
    " ". I followed the installation guide and tried to reinstall 5 times.
    Every time I had the same problem. I was wondering if this is a bug in
    the CD. How can I solve it?
    Thanks,
    Lillian

    Got past this spot... Thanks to the beefier shared memory/semaphore settings in this website (from another response in this forum)
    http://www.dbspecialists.com/4dbas/presos/oracle817solaris.html

  • Install OSB in Solaris (Intel)

    Hello,
    I am trying to install OSB 10.3 on a Mac Intel with SUN VM running Solaris 10. I download the binary from this link
    http://www.oracle.com/technology/software/products/osb/index.html
    Labeled:
    Download for Solaris Operating System (SPARC 32-bit)
    But it does not work.
    Trying to find whats wrong I download the BPM Enterprise Installer from this place
    http://www.oracle.com/technology/software/products/bpm/index.html
    Labeled:
    for Solaris Operating System (SPARC 64-bit)
    and it works
    Do you know if there is any installer of OSB for SPARC 64 or what happened with the installer?
    bash-3.00$ ./osb1031_wls103_solaris32.bin
    bash: ./ osb1031_wls103_solaris32.bin: Argumento no valido bash-3.00$
    Thanks in advance

    Hi,
    I found the following information:
    bash -3.00#file OracleBPMEnterpriseWL103100_sol.bin
    OracleBPMEnterpriseWL103100_sol.bin: secuencia de órdenes de shell ejecutable
    bash -3.00#file server103_solaris32.bin
    server103_solaris32.bin: ELF 32 bits MSB ejecutable SPARC Version 1, enlazado dinámicamente, quitado
    bash -3.00#file osb1031_wls103_solaris32.bin
    osb1031_wls103_solaris32.bin ELF 32 bits MSB ejecutable SPARC Version 1, enlazado dinámicamente, quitado
    bash -3.00#
    Why it worked is because the first one is a shell and the others are exec compiled for SPARC.
    My future proyect will run in solaris thats the reason I want to test in this enviroment. Thanks to everybody I must wait until the server with sparc arrives.

  • Oracle 8i on Solaris Intel (create dabase failed!)

    Hi All,
    I having been trying to create an oracle database on my Solaris
    Intel box for a while now but the process always fails when its
    about to create the sample database. It fails with an error:
    ORA-03113 - unexpected end of channel reached.
    And then I keep getting an "Oracle not available" message.
    I am not doing anything extraordinary, just the normal
    installation.
    My guess is that there maybe something wrong in the gerenared
    pfile. what dow you think?
    Regards
    michael

    Hi Where can I get detailed instructions about how to install
    oracle8i on solaris intel
    Olu

  • Is it Possible to install oracle 9i  32 bit on Sun Solaris Intel Edition

    Dear OTN Members ,
    It is possible to install ORACLE 9I Sun SPARC Solaris (32 Bit) on
    Sun Solaris Intel Editon 2.8 . Please inform me on
    email :-
    [email protected]
    [email protected]
    Thanking You
    Piyush Patel
    - Server name :- pi.com
    - Filename
    - Date/Time
    - Browser + Version : Netscape 4.7
    - O/S + Version : Sun Solaris Intel Edition 2.8

    857211 wrote:
    I just need some advice on installing oracle 11gWhat part/product of "oracle 11g" exactly?
    Installation Guides should be clear enough, if read. Also read Release Notes for additional support/unsupport info.
    http://docs.oracle.com/cd/E11882_01/install.112/e24186/reqs.htm#CHDHGGFE
    http://docs.oracle.com/cd/E11882_01/install.112/e24187/pre_install.htm
    However the Installation Guide for Database Client adds:
    "Note: Oracle provides 32-bit (Windows x86) and 64-bit (Windows x64) versions of Oracle Database Client. _Oracle certifies 32-bit Oracle Database Client on Windows x64_." (underline added)

  • Installing WLS on an Intel-pentium using Solaris

    Has anyone installed WLS on an intel-pentium pc running Solaris ? Although
    it appears that it is a supported combination, I did see a note that said
    "it was in the radar". Is there an official line on this ?

    It is not supported.
    The platform support page for WebLogic Server is located at:
    http://www.weblogic.com/platforms/index.html
    This page has the latest and greatest information on the platforms that
    WebLogic is certified and supported on.
    Thanks,
    Michael
    Michael Girdley
    BEA Systems
    Learning WebLogic? http://learnweblogic.com
    Buy the only book covering J2EE & WebLogic 6:
    http://www.amazon.com/exec/obidos/ASIN/0130911119/learnweblogic/102-1778325-
    4765749
    "Daniel Hoppe" <[email protected]> wrote in message
    news:[email protected]..
    Hi,
    Has anyone installed WLS on an intel-pentium pc running
    Solaris ? Although
    it appears that it is a supported combination, I did see a
    note that said
    "it was in the radar". Is there an official line on this ?
    Yepp, we tried that as a test setup. Works, but I think we did not have
    native IO running.
    Daniel

  • Installing Oracle 8i in Solaris Intel Version With Pentium 4

    Hi Guys,
    I am trying to Install Oracle 8i under Solaris 8 Intel version with Pentium 4 processor fixed.But iam'nt able to continue after I click "Install" button,the runInstaller exited badly with no response.I was told that even Installing Oracle under Windows P4 is facing the same problem,but on searching I got solution by renaming a DDL file before starting installation.Is there any similar method to do for installing it under p4 processor on solaris intel 8 version.

    Dear Mr. Kumar, i am chandrasekaran from singapore, actualy i need your help regarding the intel sun os oracle. I have Intel Based SUN OS, but i try to get Oracle CD Any version either 8i or 9i for intel sun os.
    One of my friend have the cd but it already damaged so that i need your help.
    My address
    S.Chandrasekaran, Blk 84 #07-93, Commonwealth close, Singapore 140084. If you have the cd you make one copy for me and send by post. Thank you
    My email id: [email protected] or yahoo.com
    by chandran.s

  • Can you install 9iDB  on solaris for Intel

    If yes, where can i get 9i for solaris-Intel (or do i use the one for Sun-sparc).
    Thanks

    Hello dear people,
    I'm trying to install the 9i Database for Sun SPARC (32-bit) on an Intel machine with Solaris 8 running. I followed all steps of the installation documentation, but when I try to execute the runInstaller programm, I get always the following error:
    Syntax error at row 1: '(' unexpected.
    Can you tell me, which is actually the terminal Release for Intel Solaris? I were very pleased.
    Thanks,
    Reinaldo

  • Oracle 9i in solaris Intel

    Hello All,
    Is possible to install the Oracle 9i in Solaris 8.0 to Intel?
    T+

    The newest version for Solaris Intel is 8.1.7. As far as I now this version is the last on this platform/OS.

  • Problem Installing iPlanet WebServer on Intel(P4) with Solaris8 Operating System

     

    Hi,
    Let me know, What problem(excatly) did you faced while installing iWS(Any Error) and what is the version of iWS are you trying to install?
    Btw. Are your trying to install iWS in solaris on intel platform. If that is a case it is not supported & certified by iPlanet.
    Regards,
    Dakshin.
    Developer Technical Support
    Sun Microsystems
    http://www.sun.com/developers/support.

  • Solaris intel (x86) DCA not saving when rebooted.

    I'm working with a Panasonic CF-71 toughbook laptop. I have loaded the 2.6 Solaris intel OS and the Xig PCMCIA patch. I have been successful in getting a 3Com 3C589D card to work, but only if I enter into DCA at boot time and delete the PnP ISA PCMCIA device at port 3e2-3e3 and then add a ISA PCMCIA device at port 3e2-3e3. Unfortunately this must be done every time the system is rebooted. Does any one know of a way to do this delete/add using the /etc/system file? Any help is much appreciated.
    Matt . . .

    Hi
    I have download Solaris 9 x86 and Cd1 at boot time gives the same error as you mentioned. I am using my Toshiba Satellite A60. I have check the HDL list and its not listed there. Does it mean I can not install Solaris 9 x86 on this box. When I boot I get the same error which is mentioned above.
    For more information I never installed Solaris in past and have no idea which Disk space /partition to be created it talks about in Install Guide.
    Can some please clarify and do let me know where am I going wrong and how to fix it.
    Thanks in Advance
    Owais

  • RFC SDK support on solaris-intel?

    I have some questions about the “C”  SAP RFC SDK. I cannot seem to find a complete list of supported UNIX platforms.
    What is the current version of the “C” RFC SDK?
    Is it supported on the solaris intel platform?
    I notice that the dynamic version of the RFC library (rfc32.dll)  is installed with SAP Netweaver on Windows.  Is the equivalent dynamically loaded library (i.e. librfc.so) always included with a SAP installation on UNIX as well?  Does this mean that the static libraries provided in the RFC SDK are no longer required to build a client RFC application, since a client application can dynamically load the run-time library instead?

    We don't certify Solaris on NT.
              You can find this information on platform support page.
              -- Prasad
              Puneet Maini wrote:
              > Hi
              > Is Clustering comfiguration supported for this System Requirement?
              > :
              >
              > Processor: Intel
              > Operating system: Solaris 8
              >
              > Thanks & Regards
              > Puneet Maini
              

  • Oracle 9i for Solaris Intel

    I would like to use my PC (x86 platform) to install Solaris 8 for Intel as a Database server. But I cannot found any information of Oracle 9i Database for Solaris Intel platform. WHere I can find it? Or Oracle don't support for Solaris for Intel (I found an Oracle 9i Database for Solaris SPARC only).
    Best regards

    The last version of Oracle for Solaris X86 was Oracle 8.1.7...

  • Who knows - Has Oracle plan to make 9i on Solaris Intel x86 in the future?

    Now Sun continue support of Solaris Intel, But Oracle release only 8.1.7 exist.
    Any comments,please

    Hi again,
    assumption proven ;-)
    full details from Oracle below
    HTH,
    Peter
    Applies to: Oracle Server - Enterprise Edition - Version: 10.2.0.1
    SymptomsWhile installing Oracle10gR2 on a Solaris 10 x86-64 server, Oracle Universal Installer (OUI) reports the following errors while checking the kernel parameters:
    shmsys:shminfo_shmmax=4294967295 found no entry . Failed <<
    shmsys:shminfo_shmmni=100 found no entry . Failed <<
    shmsys:shminfo_semmni=100 found no entry . Failed <<
    shmsys:shminfo_semmsl=256 found no entry . Failed <<
    The overall results of this check is Failed.
    The kernel parameters do not meet the minimum requirements
    CauseOUI is looking at /etc/system to check the kernel parameter settings, but this file is not used (by default) in Solaris 10
    OUI should check the kernel parameter settings using the resource control utility ( /bin/prctl )
    SolutionTo implement the solution, please execute one the following steps:
    1. Verify that the kernel parameter settings are correct using the resource control utility ( /bin/prctl ) and then start OUI like this:
    ./runInstaller -ignoreSysPrereqs
    OR
    2. Include the recommended kernel parameter settings in the /etc/system file and start OUI as normal:
    ./runInstaller

Maybe you are looking for

  • Problem Scanning from Samsung SCX-4623FN, using MacBook Pro with OS X 10.10.3 and Acrobat Pro 11.0.10

    My Problems: 1. Scannersoftware stopps at the end of Scanning, showing the preview but not finishing the scan. Only thing to choose: close the program and try again. Same result. I can't change to "Scan from ADF". 2. The SCX-4623FN is able to scan bo

  • Speaker setup for Apple TV

    I am interested in purchasing Apple TV to be able to play itunes and other music apps (spotify, iheart radio, pandora) thru my ipad to the TV speakers when my MacBook is turned off.  Is this possible?  The other capability I am looking for is multipl

  • At line-selection... SET pf 'status'.

    hi abapers ! i  am working with interactive reports ! my problem ...i s when am using SET PF 'STATUS'. At line-selection event is not getting triggered..! i.e, when am double cllicking on the list ... its showing choose a valid function. am able to i

  • Error in Personnel Change Request  of  MSS

    Hi SDN    I have configured ESS and MSS business packages. Everything works fine but when i navigate to Manager Self-Service--> Service Map and click on Create New Personnel Change Request link then a list of employees are displayed and when i select

  • My computer turns on but is black

    When I go to turn my computer on the power button comes on but the screen is black