Installa taion fails at 36th step "TST_ERROR."
Hi ,
I am installing SAP Netweaver 2004 SPS 13 on Solaris box.
The installation failed at 36th step "User Management "
giving the follwing error
ERROR 2006-11-20 09:27:18
MUT-03010 Execution of the command "bin/cleanup " finished with status TST_ERROR.
Anyidea what can be the problem
REgards
Manoj
Hi,
Thanks for the response.
The actual error was that there was an exceutable cleanup in the bin folder.
It did not have the exceute permission.
I gave it the excute permission and retried again.
IT went through.
REgards
Manoj
Similar Messages
-
During the final step of installing after download, I get an error - The Installer encountered an error that caused installation to fail.
Nobody can tell you anything. You have not provided any proper system information or even told us what you are actually downloading.
Mylenium -
OBIEE 11.1.1.7 installation Issues - Fails on Creating a Domain
Hi,
I have completed all the steps mentioned in different posts in this forum regarding my error, but none of them helps. After comprehensive searching i have tried to install OBIEE with these steps also.
1st time installation:
1. Followed simple steps
a) Created schema using RCU on MS SQL Server successfully.
b) After that ran the setup of OBIEE, it succeeded all the way, but when it was configuring it stuck on Creating Domain, and eventually failed after 180 minutes.
2nd time installation:
I completely removed, OBIEE from my system, with all the registry entries included. Started a fresh installation after reading all these forum posts. but still it failed again on Creating a domain, this time i kept on re-trying for 3 times, it failed and it took me about 315 minutes overall.
a) Create a loop back adapter.
b) Assigned that adapter an IP (10.10.10.10). Configured the /etc/host file reflecting my adapter IP and hostname.domain name.
127.0.0.1 localhost
127.0.0.1 WPKZS255082-XLZ.TX.MYDOMIN.COM WPKZS255082-XLZ
10.10.10.10 WPKZS255082-XLZ.TX.MYDOMIN.COM WPKZS255082-XLZ
(Above is my /etc/hosts file.
c) Installed Java JRE & JDK (7) on C:\JAVA and set the environmental variables in PATH (System Variable).
My System Configurations are:
Dell Latitude - E6520
8 GB Ram - 64-bit Architecture.
Windows 7 ULTIMATE
Computer Name : WPKZS255082-XLZ
Domain : TX.MYDOMIN.COM
----------These are the error messages that log file has created --------------
ERROR LOG START
File name from the log is generated and pasted here is : "install2015-04-17_04-50-25PM.out"
Creating a new AdminServer Object ...
AdminServer port is 7001
Starting the domain ...
LOADING DLL : C:\MMiddleware\Oracle_BI1\install\config\\StartUtil64.dll
DEBUG : Loading DLL : C:\MMiddleware\Oracle_BI1\install\config\\StartUtil64.dll
DEBUG : Loaded DLL : C:\MMiddleware\Oracle_BI1\install\config\\StartUtil64.dll
oracle.as.provisioning.util.ConfigException:
Error while starting the domain.
Cause:
An error occurred while starting the domain.
Action:
See logs for more details.
at oracle.as.provisioning.util.ConfigException.createConfigException(ConfigException.java:123)
at oracle.as.provisioning.weblogic.ASDomain.startDomain(ASDomain.java:3180)
at oracle.as.provisioning.weblogic.ASDomain.startDomain(ASDomain.java:3043)
at oracle.as.provisioning.engine.WorkFlowExecutor._startAdminServer(WorkFlowExecutor.java:1645)
at oracle.as.provisioning.engine.WorkFlowExecutor._createDomain(WorkFlowExecutor.java:635)
at oracle.as.provisioning.engine.WorkFlowExecutor.executeWLSWorkFlow(WorkFlowExecutor.java:391)
at oracle.as.provisioning.engine.Config.executeConfigWorkflow_WLS(Config.java:866)
at oracle.as.install.bi.biconfig.standard.StandardWorkFlowExecutor.executeHelper(StandardWorkFlowExecutor.java:31)
at oracle.as.install.bi.biconfig.standard.DomainProvisioningTask.doExecute(DomainProvisioningTask.java:49)
at oracle.as.install.bi.biconfig.standard.AbstractProvisioningTask.execute(AbstractProvisioningTask.java:70)
at oracle.as.install.bi.biconfig.standard.StandardProvisionTaskList.execute(StandardProvisionTaskList.java:66)
at oracle.as.install.bi.biconfig.BIConfigMain.doExecute(BIConfigMain.java:113)
at oracle.as.install.engine.modules.configuration.client.ConfigAction.execute(ConfigAction.java:375)
at oracle.as.install.engine.modules.configuration.action.TaskPerformer.run(TaskPerformer.java:88)
at oracle.as.install.engine.modules.configuration.action.TaskPerformer.startConfigAction(TaskPerformer.java:105)
at oracle.as.install.engine.modules.configuration.action.ActionRequest.perform(ActionRequest.java:15)
at oracle.as.install.engine.modules.configuration.action.RequestQueue.perform(RequestQueue.java:96)
at oracle.as.install.engine.modules.configuration.standard.StandardConfigActionManager.start(StandardConfigActionManager.java:186)
at oracle.as.install.engine.modules.configuration.boot.ConfigurationExtension.kickstart(ConfigurationExtension.java:81)
at oracle.as.install.engine.modules.configuration.ConfigurationModule.run(ConfigurationModule.java:86)
at java.lang.Thread.run(Thread.java:662)
Caused by: oracle.as.provisioning.util.ConfigException:
Error while starting the domain.
Cause:
Starting the Admin_Server timed out.
Action:
See logs for more details.
at oracle.as.provisioning.util.ConfigException.createConfigException(ConfigException.java:123)
at oracle.as.provisioning.weblogic.ASDomain.startDomain(ASDomain.java:3150)
... 19 more
oracle.as.provisioning.exception.ASProvisioningException
at oracle.as.provisioning.engine.Config.executeConfigWorkflow_WLS(Config.java:872)
at oracle.as.install.bi.biconfig.standard.StandardWorkFlowExecutor.executeHelper(StandardWorkFlowExecutor.java:31)
at oracle.as.install.bi.biconfig.standard.DomainProvisioningTask.doExecute(DomainProvisioningTask.java:49)
at oracle.as.install.bi.biconfig.standard.AbstractProvisioningTask.execute(AbstractProvisioningTask.java:70)
at oracle.as.install.bi.biconfig.standard.StandardProvisionTaskList.execute(StandardProvisionTaskList.java:66)
at oracle.as.install.bi.biconfig.BIConfigMain.doExecute(BIConfigMain.java:113)
at oracle.as.install.engine.modules.configuration.client.ConfigAction.execute(ConfigAction.java:375)
at oracle.as.install.engine.modules.configuration.action.TaskPerformer.run(TaskPerformer.java:88)
at oracle.as.install.engine.modules.configuration.action.TaskPerformer.startConfigAction(TaskPerformer.java:105)
at oracle.as.install.engine.modules.configuration.action.ActionRequest.perform(ActionRequest.java:15)
at oracle.as.install.engine.modules.configuration.action.RequestQueue.perform(RequestQueue.java:96)
at oracle.as.install.engine.modules.configuration.standard.StandardConfigActionManager.start(StandardConfigActionManager.java:186)
at oracle.as.install.engine.modules.configuration.boot.ConfigurationExtension.kickstart(ConfigurationExtension.java:81)
at oracle.as.install.engine.modules.configuration.ConfigurationModule.run(ConfigurationModule.java:86)
at java.lang.Thread.run(Thread.java:662)
Caused by: oracle.as.provisioning.exception.ASProvWorkflowException: Error Executing workflow.
at oracle.as.provisioning.engine.WorkFlowExecutor._createDomain(WorkFlowExecutor.java:686)
at oracle.as.provisioning.engine.WorkFlowExecutor.executeWLSWorkFlow(WorkFlowExecutor.java:391)
at oracle.as.provisioning.engine.Config.executeConfigWorkflow_WLS(Config.java:866)
... 14 more
java.lang.Exception: Unable to find a free port in range 7001 and 7500
at oracle.as.install.engine.modules.util.others.PortUtilities.getFreePortInRange(PortUtilities.java:83)
at oracle.as.install.bi.biconfig.util.PortUtilitiesImpl.getFreePortInRange(PortUtilitiesImpl.java:17)
at oracle.as.install.bi.biconfig.standard.PortList.getPort(PortList.java:125)
at oracle.as.install.bi.biconfig.standard.PortList.getConsecutivePorts(PortList.java:160)
at oracle.as.install.bi.biconfig.standard.PortList.assignPort(PortList.java:181)
at oracle.as.install.bi.biconfig.standard.DomainProvisioningTask._initFarmDetails(DomainProvisioningTask.java:86)
at oracle.as.install.bi.biconfig.standard.DomainProvisioningTask.doExecute(DomainProvisioningTask.java:48)
at oracle.as.install.bi.biconfig.standard.AbstractProvisioningTask.execute(AbstractProvisioningTask.java:70)
at oracle.as.install.bi.biconfig.standard.StandardProvisionTaskList.execute(StandardProvisionTaskList.java:66)
at oracle.as.install.bi.biconfig.BIConfigMain.doExecute(BIConfigMain.java:113)
at oracle.as.install.engine.modules.configuration.client.ConfigAction.execute(ConfigAction.java:375)
at oracle.as.install.engine.modules.configuration.action.TaskPerformer.run(TaskPerformer.java:88)
at oracle.as.install.engine.modules.configuration.action.TaskPerformer.startConfigAction(TaskPerformer.java:105)
at oracle.as.install.engine.modules.configuration.action.ActionRequest.perform(ActionRequest.java:15)
at oracle.as.install.engine.modules.configuration.action.RequestQueue.perform(RequestQueue.java:96)
at oracle.as.install.engine.modules.configuration.standard.StandardConfigActionManager.start(StandardConfigActionManager.java:186)
at oracle.as.install.engine.modules.configuration.boot.ConfigurationExtension.kickstart(ConfigurationExtension.java:81)
at oracle.as.install.engine.modules.configuration.ConfigurationModule.run(ConfigurationModule.java:86)
at java.lang.Thread.run(Thread.java:662)
java.lang.Exception: Unable to find a free port in range 9500 and 10000
at oracle.as.install.engine.modules.util.others.PortUtilities.getFreePortInRange(PortUtilities.java:83)
at oracle.as.install.bi.biconfig.util.PortUtilitiesImpl.getFreePortInRange(PortUtilitiesImpl.java:17)
at oracle.as.install.bi.biconfig.standard.PortList.getPort(PortList.java:125)
at oracle.as.install.bi.biconfig.standard.PortList.getConsecutivePorts(PortList.java:160)
at oracle.as.install.bi.biconfig.standard.PortList.assignPort(PortList.java:181)
at oracle.as.install.bi.biconfig.standard.DomainProvisioningTask._initFarmDetails(DomainProvisioningTask.java:89)
at oracle.as.install.bi.biconfig.standard.DomainProvisioningTask.doExecute(DomainProvisioningTask.java:48)
at oracle.as.install.bi.biconfig.standard.AbstractProvisioningTask.execute(AbstractProvisioningTask.java:70)
at oracle.as.install.bi.biconfig.standard.StandardProvisionTaskList.execute(StandardProvisionTaskList.java:66)
at oracle.as.install.bi.biconfig.BIConfigMain.doExecute(BIConfigMain.java:113)
at oracle.as.install.engine.modules.configuration.client.ConfigAction.execute(ConfigAction.java:375)
at oracle.as.install.engine.modules.configuration.action.TaskPerformer.run(TaskPerformer.java:88)
at oracle.as.install.engine.modules.configuration.action.TaskPerformer.startConfigAction(TaskPerformer.java:105)
at oracle.as.install.engine.modules.configuration.action.ActionRequest.perform(ActionRequest.java:15)
at oracle.as.install.engine.modules.configuration.action.RequestQueue.perform(RequestQueue.java:96)
at oracle.as.install.engine.modules.configuration.standard.StandardConfigActionManager.start(StandardConfigActionManager.java:186)
at oracle.as.install.engine.modules.configuration.boot.ConfigurationExtension.kickstart(ConfigurationExtension.java:81)
at oracle.as.install.engine.modules.configuration.ConfigurationModule.run(ConfigurationModule.java:86)
at java.lang.Thread.run(Thread.java:662)
java.lang.Exception: Unable to find a free port in range 9500 and 10000
at oracle.as.install.engine.modules.util.others.PortUtilities.getFreePortInRange(PortUtilities.java:83)
at oracle.as.install.bi.biconfig.util.PortUtilitiesImpl.getFreePortInRange(PortUtilitiesImpl.java:17)
at oracle.as.install.bi.biconfig.standard.PortList.getPort(PortList.java:125)
at oracle.as.install.bi.biconfig.standard.PortList.getConsecutivePorts(PortList.java:160)
at oracle.as.install.bi.biconfig.standard.PortList.assignPort(PortList.java:181)
at oracle.as.install.bi.biconfig.standard.DomainProvisioningTask._setNodeManagerPort(DomainProvisioningTask.java:151)
at oracle.as.install.bi.biconfig.standard.DomainProvisioningTask._initFarmDetails(DomainProvisioningTask.java:135)
at oracle.as.install.bi.biconfig.standard.DomainProvisioningTask.doExecute(DomainProvisioningTask.java:48)
at oracle.as.install.bi.biconfig.standard.AbstractProvisioningTask.execute(AbstractProvisioningTask.java:70)
at oracle.as.install.bi.biconfig.standard.StandardProvisionTaskList.execute(StandardProvisionTaskList.java:66)
at oracle.as.install.bi.biconfig.BIConfigMain.doExecute(BIConfigMain.java:113)
at oracle.as.install.engine.modules.configuration.client.ConfigAction.execute(ConfigAction.java:375)
at oracle.as.install.engine.modules.configuration.action.TaskPerformer.run(TaskPerformer.java:88)
at oracle.as.install.engine.modules.configuration.action.TaskPerformer.startConfigAction(TaskPerformer.java:105)
at oracle.as.install.engine.modules.configuration.action.ActionRequest.perform(ActionRequest.java:15)
at oracle.as.install.engine.modules.configuration.action.RequestQueue.perform(RequestQueue.java:96)
at oracle.as.install.engine.modules.configuration.standard.StandardConfigActionManager.start(StandardConfigActionManager.java:186)
at oracle.as.install.engine.modules.configuration.boot.ConfigurationExtension.kickstart(ConfigurationExtension.java:81)
at oracle.as.install.engine.modules.configuration.ConfigurationModule.run(ConfigurationModule.java:86)
at java.lang.Thread.run(Thread.java:662)
AdminServer port is -1
oracle.as.provisioning.exception.ASProvisioningException
at oracle.as.provisioning.engine.Config.executeConfigWorkflow_WLS(Config.java:872)
at oracle.as.install.bi.biconfig.standard.StandardWorkFlowExecutor.executeHelper(StandardWorkFlowExecutor.java:31)
at oracle.as.install.bi.biconfig.standard.DomainProvisioningTask.doExecute(DomainProvisioningTask.java:49)
at oracle.as.install.bi.biconfig.standard.AbstractProvisioningTask.execute(AbstractProvisioningTask.java:70)
at oracle.as.install.bi.biconfig.standard.StandardProvisionTaskList.execute(StandardProvisionTaskList.java:66)
at oracle.as.install.bi.biconfig.BIConfigMain.doExecute(BIConfigMain.java:113)
at oracle.as.install.engine.modules.configuration.client.ConfigAction.execute(ConfigAction.java:375)
at oracle.as.install.engine.modules.configuration.action.TaskPerformer.run(TaskPerformer.java:88)
at oracle.as.install.engine.modules.configuration.action.TaskPerformer.startConfigAction(TaskPerformer.java:105)
at oracle.as.install.engine.modules.configuration.action.ActionRequest.perform(ActionRequest.java:15)
at oracle.as.install.engine.modules.configuration.action.RequestQueue.perform(RequestQueue.java:96)
at oracle.as.install.engine.modules.configuration.standard.StandardConfigActionManager.start(StandardConfigActionManager.java:186)
at oracle.as.install.engine.modules.configuration.boot.ConfigurationExtension.kickstart(ConfigurationExtension.java:81)
at oracle.as.install.engine.modules.configuration.ConfigurationModule.run(ConfigurationModule.java:86)
at java.lang.Thread.run(Thread.java:662)
Caused by: java.lang.IllegalArgumentException: Invalid JMX Port
at oracle.as.provisioning.weblogic.ASDomain.<init>(ASDomain.java:340)
at oracle.as.provisioning.engine.WorkFlowExecutor._initializeConfigEngine(WorkFlowExecutor.java:1693)
at oracle.as.provisioning.engine.WorkFlowExecutor._createDomain(WorkFlowExecutor.java:618)
at oracle.as.provisioning.engine.WorkFlowExecutor.executeWLSWorkFlow(WorkFlowExecutor.java:391)
at oracle.as.provisioning.engine.Config.executeConfigWorkflow_WLS(Config.java:866)
... 14 more
ERROR LOG ENDS
Request your urgent response on this matter. If anyone finds this same error, please send your feedback.
ThanksHello 0ad6e3fe-e3d8-4867-8ba9-780c4a7150ff,
Your name must be hard to type, let alone remember. Please choose a more speaking name / handle for this forum since it's inconvenient talking to an alphanumeric string rather than a person.
You seem to have port issues:
java.lang.Exception: Unable to find a free port in range 7001 and 7500
java.lang.Exception: Unable to find a free port in range 9500 and 10000
java.lang.Exception: Unable to find a free port in range 9500 and 10000
However you're on Windows, so I suggest you check the last post in this thread: Re: OBIEE 11.1.1.5 installation Error on windows 7 64 bit
BTW: Doing a google search as well as a normal forum search bring up that thread and the very first search result for you issue. -
OIM 9.1.0.2 - ActiveDirectory 9.1.1.7.0 Installation Status : Failed
Hi,
I am using OIM 9.1.0.2
When I install the AD connector from Deployment Manager -->Install Connector, It shows the error
DOBJ.XML_IMPORT_ERROR
Unknown tag OBJ_OFFLINED recieved.
Step 2 : Connector Installation
ActiveDirectory 9.1.1.7.0 Installation Status : Failed
Configuration of Connector Libraries
X Import of Connector XML Files (Using Deployment Manager)
X Compilation of Adapter Definitions
Click Retry to retry the installation after correcting the errors.
What needs to be done for this ?
Regards
PraveenWith the introduction of oim 9.1.0.2, the Offline-Line Provisioning attribute was added to the Resource Object. You are trying to import the connector into an environment that is out of date. The solution to this is to open up the XML file, and cut out the XML tag within your resource object for OBJ_OFFLINED and then it should work. But the next issue you are going to run into is most likely the connector version is not supported in your version so it might not work.
-Kevin -
OIM 11.1.1.5.0 - ActiveDirectory 11.1.1.5.0 Installation Status : Failed
Hi everyone,
I want to install the active directory connector 11.1.1.5.0 for my oim but the installation failed for the step => "Import of the connector XML files (by using the Deployment Manager)". It shows the error :
DOBJ.XML_IMPORT_ERROR
oracle.iam.scheduler.exception.SchedulerConverterException: Unable to find ressource 'oracle/iam/scheduler/converter/schedulermap.vm'
What does it means ? I don't understand why it is looking for this schedulermap.vm
Thanks a lot for your answer !
Regards
ThibaultHi Thibault,
according to http://docs.oracle.com/cd/E22999_01/doc.111/e20347/intro.htm#BABGDDEE the 11.1.1.5.0 Microsoft Active Directory User Management connector needs at least Oracle Identity Manager 11g release 1 (11.1.1.5.2) BP02 with patch 13684913.
So you better try the 9.1.1.5 one: http://download.oracle.com/otn/nt/ias/connectors/910/MSFT_AD_91150.zip
Now regarding the server installation there is not OIM 11.1.1.2 version. The 11.1.1.2 is referring to the suite that contains OID, OVD, OIF.
OIM is part of the Identity & Access Management Suite and the versions that exist are 11.1.1.3 and 11.1.1.5, each of these can be installed directly.
Best regards,
Florin -
WSUS reinstall on 2012 SCCM server post-installation task fails to run/finish
I had to re-install WSUS on a 2012 R2 SCCM server (Windows 2012), and am running into several issues re-installing. It may help to point out that the SCCM SQL server is remote, so this isn't a WSUS / SQL 2012 issue.
The sticky post at the top of the WSUS forum has helpful troubleshooting information, and I have tried going through this as well as many other threads on this very topic of re-installing WSUS.
1. Roles for WSUS and WID were removed successfully. The WSUS Website was manually deleted from IIS. As this is a SCCM server, removing the IIS role is not an option.
2. I removed the existing WID database files for SUSDB
3. After rebooting, I verified registry keys were gone, system files were cleaned up, and deleted the program files\update services directory
4. This isn't a permission issue, as I have clearly installed this before on this server.
5. Registry keys, system files, and susdb files no longer exist, and the server has rebooted cleanly.
6. I am able to add the WSUS role selecting WID, and this installs WID without any errors. At this point, simply clicking the post installation task fails, generates an empty .tmp file in my %appdata%\temp folder, and exits the MMC.
7. This file is blank. Absolutely empty, so I couldn't really troubleshoot any post installation tasks.
8. Further investigation shows that the 'C:\Program Files\Update Services\Tools\' directory is gone, and isn't being
generated.
9. Ok... DISM /online /Cleanup-Image /Scanhealth didn't return any issues, so I copied the wsusutil out of the windows\WinSxS directory.
10. Yey! wsusutil postinstall runs, but bombs out on the IIS portion. It generated the DB without an issue, but results
in an IIS generation error. So, I installed WSUS on a clean 2012 install, then copied over the program files\updateServices directory to reclaim the missing files.
The log files show --
2013-12-06 10:30:34 Configuring IIS...
2013-12-06 10:30:35 Start: ConfigureWebsite
2013-12-06 10:30:36 Configuring website on port 8530
2013-12-06 10:30:39 System.ComponentModel.Win32Exception (0x80004005): The system cannot find the file specified
at System.Diagnostics.Process.StartWithShellExecuteEx(ProcessStartInfo startInfo)
at System.Diagnostics.Process.Start(ProcessStartInfo startInfo)
at Microsoft.UpdateServices.Administration.UseCustomWebSite.ExecuteIisCustomAction(String arguments)
at Microsoft.UpdateServices.Administration.UseCustomWebSite.Install(Int32 portNumber)
at Microsoft.UpdateServices.Administration.UseCustomWebSite.InstallAndConfigure(IisConfiguration& iisConfiguration, Int32 newPortNumber)
at Microsoft.UpdateServices.Administration.PostInstall.ConfigureWebsite(Int32 portNumber)
at Microsoft.UpdateServices.Administration.PostInstall.Run()
at Microsoft.UpdateServices.Administration.PostInstall.Execute(String[] arguments)
... ok - tripple checked that network service has permissions to .net and windows\temp folders.
netstat -a doesn't show anything running on port 8530 ( in case this was some weird port check in use)
Which goes back to the missing directory problem -- further net searches show that this is a reoccurring issue for some OOBE... sfc /verifyonly shows ... nothing.
What is left to be done at this point? The missing folders from the program directory seems to be a problem for some with some users right out of the box. I have read many other threads where users just formatted and started over. Not exactly a solution
- any help out there on this issue? Any suggestions to determine what file is missing, or generating the IIS issues?Part of the post install tasks wanted to download some items including the tools folder.
Can you expand on this please. The WSUS post-install tasks do not download anything, except what is acquired during the initial synchronization with Microsoft.
Because of my group policy the WSUS server was trying to download the updates from itself even though it was not setup yet.
What update(s) was the WSUS server trying to "download"?
In fact, if the WSUS Server was not setup yet (but you already had a GPO in place), then the first issue here was performing deployment steps out of order.
But still.... except for the actual installation binaries for the WSUS Server Role on a WS2008SP2/WS2008R2 system, there's nothing the WSUS server needs to get from either Windows Update or a WSUS server. This scenario is actually discussed hundreds of times
in this forum, but complicating matters, this thread isn't about installing WSUS V3.2 on a WS2008SP2/WS2008R2 system, it's about installing WSUS v65 on a WS2012 system, so I'm a bit confused as to what the actual installation environment is that we're discussing.
I changed the WSUS server to get it's windows updates from Microsoft and then the post install task succeeded.
I'd really like to get some more details about what exactly in the "post-install task" was dependent upon content from WU/WSUS.
Lawrence Garvin, M.S., MCSA, MCITP:EA, MCDBA
SolarWinds Head Geek
Microsoft MVP - Software Packaging, Deployment & Servicing (2005-2014)
My MVP Profile: http://mvp.microsoft.com/en-us/mvp/Lawrence%20R%20Garvin-32101
http://www.solarwinds.com/gotmicrosoft
The views expressed on this post are mine and do not necessarily reflect the views of SolarWinds. -
Hello,
I've encountered issue during installation of SP1 to SQL Server 2012. After upgrade I'm getting this error in Event Log:
Script level upgrade for database 'master' failed because upgrade step 'msdb110_upgrade.sql' encountered error 537, state 3, severity 16. This is a serious error condition which might interfere with regular operation and the database will be taken offline.
If the error happened during upgrade of the 'master' database, it will prevent the entire SQL Server instance from starting. Examine the previous errorlog entries for errors, take the appropriate corrective actions and re-start the database so that the script
upgrade steps run to completion.
Can someone point me direction how I can fix it? This is a production server and currently only way to make it working is to use T902 flag in SQL Server startup params. I've found some suggestions to check Data path if it exists but it does so this is not
the issue here. Any ideas?
I've found also here
http://www.sqlservercentral.com/Forums/Topic1377073-1550-1.aspx#bm1378279
suggestions for similar issue with SQL Server 2008 which that I should do:
Via ssms:
From msdb:
Delete:
dc_admin role
Dc_operator role
Dc_proxy role
UlitityCMRReader role
UtilityIMRReader role
UtilityIMRWriter role
but for not I didn't tried it yet. This is standalone SQL Server instance.
Any help really appreciated.
RegardsScript returns the same error.
System databases:
1 1 760 -1 10 1048578 0 1 master C:\Program Files\Microsoft SQL Server\MSSQL10.MSSQLSERVER\MSSQL\DATA\master.mdf
2 0 12768 -1 10 1048642 0 1 mastlog C:\Program Files\Microsoft SQL Server\MSSQL10.MSSQLSERVER\MSSQL\DATA\mastlog.ldf
1 1 1024 -1 10 1048578 0 2 tempdev C:\Program Files\Microsoft SQL Server\MSSQL10.MSSQLSERVER\MSSQL\DATA\tempdb.mdf
2 0 64 -1 10 1048642 0 2 templog C:\Program Files\Microsoft SQL Server\MSSQL10.MSSQLSERVER\MSSQL\DATA\templog.ldf
1 1 288 -1 128 2 0 3 modeldev C:\Program Files\Microsoft SQL Server\MSSQL10.MSSQLSERVER\MSSQL\DATA\model.mdf
2 0 4464 -1 10 1048642 0 3 modellog C:\Program Files\Microsoft SQL Server\MSSQL10.MSSQLSERVER\MSSQL\DATA\modellog.ldf
1 1 28936 -1 10 1048578 0 4 MSDBData C:\Program Files\Microsoft SQL Server\MSSQL10.MSSQLSERVER\MSSQL\DATA\MSDBData.mdf
2 0 3352 268435456 10 1048642 0 4 MSDBLog C:\Program Files\Microsoft SQL Server\MSSQL10.MSSQLSERVER\MSSQL\DATA\MSDBLog.ldf
are all in place where path shows.
Before sending my message I've searched update script for "FROM master.sys.master_files" and I found script which you are showing me. I've made some digging and when I runned:
SELECT physical_name
FROM master.sys.master_files
WHERE (name = N'master')
it returned also path to one my customers database name which has filename set correctly but it's Logical DB name is master and mastlog. I'm running shared hosting company and I allow my customers to restore their DBs from .bak files but I have no idea why
this customers logical name is set to master and mastlog. Probably when I change this names update script will work as it should. On the other hand in my opinion there should be some kind of fail safe mechanism for situations like this one.
EDIT: After changing logical name for DB and log for mentioned DB your script runned fine so probably now when I remove T902 flag and restart my SQL Server update will run correctly. Big thanks for resolving this issue. -
Rapidwiz fails on database step for 12.1.1 on Oracle Linux 5.7
I am trying to install Oracle EBS 12.1.1 on Oracle Linux 5.7 64 bit platform.
The issue is that after I followed the requirements including set kernel parameters by using the oracle-validated RPM package, the install fails on database creation step.
Below are logs:
getConnectionUsingSID() -->
JDBC URL: jdbc:oracle:thin:@ebsdb01:1526:VIS
Exception occurred: java.sql.SQLException: Io exception: The Network Adapter could not establish the connection
Trying to connect using SID as ServiceName
getConnectionUsingServiceName() -->
JDBC URL: jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=ebsdb01)(PORT=1526))(CONNECT_DATA=(SERVICE_NAME=VIS)))
Exception occurred: java.sql.SQLException: Io exception: The Network Adapter could not establish the connection
Trying to connect using SID as ServiceName.DomainName
getConnectionUsingServiceName() -->
JDBC URL: jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=ebsdb01)(PORT=1526))(CONNECT_DATA=(SERVICE_NAME=VIS)))
Exception occurred: java.sql.SQLException: Io exception: The Network Adapter could not establish the connection
I checked network interfaces and can ping the hosts. Here is my network /etc/hosts file:
127.0.0.1 localhost.localdomain localhost
112.2.2.10 ebsapp01.local.com ebsapp01
112.2.2.11 ebsapp02.local.com ebsapp02
112.2.2.20 ebsdb01.local.com ebsdb01
Any ideas how to solve this issue? I even used latest release of Rapid Install wizard and no luck.RDA is a diagnostic script for looking at requirements and settings from MOS.
I run this way:
perl rda.pl -T hcve
with results:
Test "Oracle E-Business Suite Release 12 (12.1.1) Preinstall (Linux x86 and x86_64)" executed at 01-Feb-2013 20:05:23
Test Results
~~~~~~~~~~~~
ID NAME RESULT VALUE
====== ==================== ======= ==========================================
A00100 OS Type RECORD OL5 64
A00200 OS Certified? PASSED Adequate
A00210 RPM OL4/32 OK? SKIPPED Not Oracle Linux 4 32-bit
A00220 RPM OL4/64 OK? SKIPPED Not Oracle Linux 4 64-bit
A00230 RPM OL5/32 OK? SKIPPED Not Oracle Linux 5 32-bit
A00240 RPM OL5/64 OK? FAILED [libstdc++-devel(i386)] not installed
A00241 RPM OL6/32 OK? SKIPPED Not Oracle Linux 6 32-bit
A00242 RPM OL6/64 OK? SKIPPED Not Oracle Linux 6 64-bit
A00250 RPM RH3/32 OK? SKIPPED Not Red Hat Enterprise Linux 3 32-bit
A00270 RPM RH4/32 OK? SKIPPED Not Red Hat Enterprise Linux 4 32-bit
A00280 RPM RH4/64 OK? SKIPPED Not Red Hat Enterprise Linux 4 64-bit
A00290 RPM RH5/32 OK? SKIPPED Not Red Hat Enterprise Linux 5 32-bit
A00300 RPM RH5/64 OK? SKIPPED Not Red Hat Enterprise Linux 5 64-bit
A00301 RPM RH6/32 OK? SKIPPED Not Red Hat Enterprise Linux 6 32-bit
A00302 RPM RH6/64 OK? SKIPPED Not Red Hat Enterprise Linux 6 64-bit
A00310 RPM SLES9/32 OK? SKIPPED Not SuSE Linux Enterprise 9 32-bit
A00320 RPM SLES9/64 OK? SKIPPED Not SuSE Linux Enterprise 9 64-bit
A00330 RPM SLES10/32 OK? SKIPPED Not SuSE Linux Enterprise 10 32-bit
A00340 RPM SLES10/64 OK? SKIPPED Not SuSE Linux Enterprise 10 64-bit
A00342 RPM SLES11/64 OK? SKIPPED Not SuSE Linux Enterprise 11 64-bit
A00350 Motif Link PASSED MotifLinkOK
A00360 ENV Variable Unset SKIPPED Not SuSE Linux Enterprise 10
A00370 Got Software Tools? PASSED tools_found
A00400 IP Address RECORD 122.2.2.2
A00410 Domain Name RECORD local.com
A00420 DNS Lookup FAILED nslookup IP_address
A00430 /etc/hosts format PASSED Adequate IPv4 entry
A00440 SysNetw File PASSED SysNetOK
A00450 NoNetwProf File PASSED OK
A00460 DNS Settings RECORD DNSOptionsOK
A00470 Net Service Access? PASSED NonExist
A00480 Port 6000 PASSED Free
A00500 Kernel Params OK? PASSED KernelOK
A00510 Port Range OK? FAILED HighValue
A00520 Limit Processes PASSED Adequate
A00530 Limit Descriptors FAILED Less than 65536
A00600 ApplTierDirectory RECORD /d01
A00610 A_T Valid? PASSED ATexists
A00620 A_T Permissions OK? PASSED CorrectPerms
A00630 A_T Disk Space PASSED OK
A00640 Space in tmp PASSED AvailableI do not understand why I have to ask for the Doc ID 3 times!
If you are running the one in (RDA 4 - Health Check / Validation Engine Guide [ID 250262.1]), then I believe it is only available for "Linux-x86 Platforms" (32-bit).
2) I notice issue with DNS configuration:
[root@ebsdb01 rda]# nslookup 122.2.2.2
Server: 122.2.2.2
Address: 122.2.2.22#5
** server can't find .in-addr.arpa.: NXDOMAINThis is a network issue, please check with your network admins/team.
3)
So this leads me to my next question, when I use nslookup to search the domain on the DNS server for the host, it resolves successfully. BUT, when I run nslookup against the IP address
it cannot find it in DNS. Would this be the root cause of why my installation keeps failing? I have verified checksums and software is fine. I am still missing a couple RPMs but do not believe this is what causing the install to fail yet in light of the network connection errors that Rapidwiz keeps throwing at me.All network files/settings can be found in (Oracle E-Business Suite Installation and Upgrade Notes Release 12 (12.1.1) for Linux x86-64 [ID 761566.1]).
Thanks,
Hussein -
CS6 Master Collection installer constant fail
I purchased CS6 Master Collection and, to save download time, the reseller (iSoftware) burnt it to disk for me. All four folders are now in a single folder on my desktop. I've tried "setup.exe" multiple times (in part 1) and the installer always fails at the same point.
Yesterday I replaced Vista Business 64-bit with Win7 64-bit - same problem every time. The PDApp log states:
[FATAL] DWANative - Error in mdbGetProductIDList 12
.102 [FATAL] DeploymentNativeApplet The start applet did not return the result xml. StartApplet returned <error>Failed to open session</error>
.102 [FATAL] Deployment.FetchMediaInformation Error in starting deployment native applet
In case the DVD was faulty and was corrupt or missing a file I have also downloaded a replacement copy of part 1 from iSoftware - same result.
Computer: PC - HP xw6400 Workstation
Processors: 2 x Intel Xenon CPU E5345 - quad core with 8GB RAM
OS : Win 7 64-bit
I've run out of ideas and places to research. Where do I go from here? All help gratefully received.
MIKEdownload the proper installation files after cleaning your computer.
Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6
Downloads available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 12 | 11, 10 | 9, 8, 7
Photoshop Elements: 12 | 11, 10 | 9,8,7
Lightroom: 5.6| 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'. -
Every time I attempt to install adobe photoshop cs6, it says installer has failed to initialize HELP
Every time I attempt to install adobe photoshop cs6, it says installer has failed to initialize, what do I do?
Hi supercein,
Please try re- downloading the package and reinstall and check.
You can also try downloading from the direct download links available at : http://prodesigntools.com/adobe-cs6-direct-download-links.html
But make sure you follow the important steps mentioned on the page before initiating the download.
In case you still face issues you can follow the steps below :
> Enable the hidden Admin Account on Windows 7 ( Ref : http://www.howtogeek.com/howto/windows-vista/enable-the-hidden-adminis trator-account-on-windows-vista/ )
> Disable all Non-Microsoft Startup Services. (Ref : http://helpx.adobe.com/x-productkb/global/disable-startup-items-servic es-windows.html )
> Disable all the Antivirus softwares like CA, Norton,Mc Afee etc. temporarily from the computer.
Reboot and try installing and check. -
Windows 10 technical preview installation has failed
Hi,
I currently use Windows 10 build 9860 on my computer and in another partition of my hard drive I have windows 8.1
Today I was trying to update my build trough the update and recovery>preview builds, but I was getting this error message: "Failed to install the new build, please try again later. 0x8024200D"
After that, I tried to download the offline .iso of the new build and running the setup, every was looking fine but when the installation got to 25% it came back to my desktop and a message appeared: "windows 10 technical preview installation has failed"
Any way that I can solve this?
ThanksHi,
I tried a bunch of different steps:
- Do a clean boot
- Use command WSReset.exe on run box
- Command prompt:dism.exe /online /cleanup-image scanhealth and restorehealth(When i use restorehealth gives me this error:0x800f081f)
- Create a new admin user and try to install update
- rename softwaredistribution
- Command prompt: powershell -ExecutionPolicy Unrestricted Add-AppxPackage -DisableDevelopmentMode -Register $Env:SystemRoot\WinStore\AppxManifest.XML
None of this worked so far for me.
I went to C:\$Windows.~BT\Sources\Panther\setuperr.log and got this:
2015-04-03 01:56:15, Error DU DU::CDUSession::Initialize: Failed to begin IUpgradeInternalSession. hr = 0x80004002[gle=0x0000007f]
2015-04-03 01:56:19, Error CDiagnosticsHelper::SetSQMDatapoint: Attempting to set a datapoint in an invalid SQM session[gle=0x0000007f]
2015-04-03 01:57:05, Error DU DU::CDUSession::Initialize: Failed to begin IUpgradeInternalSession. hr = 0x80004002[gle=0x0000007f]
2015-04-03 01:57:24, Error SP pDUSearch: DUSearch failed. hr = 0x80070057
2015-04-03 01:57:24, Error SP CDownloadDUUpdates::DoExecuteInternal: Failed to search for updates. hr = 0x80070057
2015-04-03 01:57:24, Error SP CSetupPlatform::DownloadDynamicUpdates: Failed to download updates. Error: 0x80070057[gle=0x00000012]
2015-04-03 01:57:24, Error MOUPG DUImage: Failed to execute DUImage FOD search and download [0x80070057][gle=0x00000012]
2015-04-03 01:57:29, Error SP pDUSearch: DUSearch failed. hr = 0x80070057
2015-04-03 01:58:43, Error SP pDUSearch: DUSearch failed. hr = 0x80070057
2015-04-03 01:58:43, Error SP CDownloadDUUpdates::DoExecuteInternal: Failed to search for updates. hr = 0x80070057
2015-04-03 01:58:43, Error SP CSetupPlatform::DownloadDynamicUpdates: Failed to download updates. Error: 0x80070057[gle=0x00000012]
2015-04-03 01:58:43, Error MOUPG DUImage: Failed to execute DUImage LangPack search and download [0x80070057][gle=0x00000012]
2015-04-03 01:58:44, Error CONX Failed to get class data from printer 80070057
2015-04-03 01:59:13, Error CONX Unable to get message handle 80092009 c:\windows\system32\drivers\pltgc.sys
2015-04-03 01:59:14, Error CONX Unable to get message handle 80092009 c:\windows\system32\drivers\tapoas.sys
2015-04-03 01:59:36, Error ConX::Compatibility::CActionT<5,struct ConX::Compatibility::NoParameters>::Invoke: Successfully persist data.
2015-04-03 02:02:47, Error SP CSetSafeOSBootCommand::DoExecute: Failed to set the boot app $WINDOWS.~BT\Sources\SetupPlatform.exe. hr = 0x80070003[gle=0x00000003]
2015-04-03 02:02:47, Error SP Operation failed: Set safe OS boot command. Error: 0x80070003[gle=0x000000b7]
2015-04-03 02:02:47, Error MOUPG MoSetupPlatform: ExecuteCurrentOperations reported failure!
2015-04-03 02:02:47, Error MOUPG MoSetupPlatform: Using action error code: [0x80070003]
2015-04-03 02:02:47, Error MOUPG CDlpActionImageDeploy::ExecuteRoutine(322): Result = 0x80070003
2015-04-03 02:02:48, Error MOUPG CDlpActionImpl<class CDlpErrorImpl<class CDlpObjectInternalImpl<class CUnknownImpl<class IMoSetupDlpAction> > > >::Execute(441): Result =
0x80070003
2015-04-03 02:02:48, Error MOUPG CDlpTask::ExecuteAction(3218): Result = 0x80070003
2015-04-03 02:02:48, Error MOUPG CDlpTask::ExecuteActions(3372): Result = 0x80070003
2015-04-03 02:02:48, Error MOUPG CDlpTask::Execute(1630): Result = 0x80070003
2015-04-03 02:02:51, Error MOUPG CSetupManager::ExecuteTask(1710): Result = 0x80070003
2015-04-03 02:02:51, Error MOUPG CSetupManager::ExecuteTask(1673): Result = 0x80070003
2015-04-03 02:02:51, Error MOUPG CSetupManager::ExecuteInstallMode(695): Result = 0x80070003
2015-04-03 02:02:51, Error MOUPG CSetupManager::ExecuteDownlevelMode(353): Result = 0x80070003
2015-04-03 02:05:32, Error MOUPG CSetupManager::Execute(204): Result = 0x80070003
2015-04-03 02:05:32, Error MOUPG CSetupHost::Execute(387): Result = 0x80070003
I have no clue what to do next, now my windows build is saying that will expire 04/15.
Any ideas?
Thanks -
Lightroom 5 installation keeps failing
Lightroom 5 installation keeps failing.
Solution mentioned here doesn't work, because my default installation language is English. The installation process stops and shows there's an error but doesn't actually show the error message. The system language on my laptop is Russian.
I had a trial installed previously and now need to activate it with my Creative Cloud membership but it's been about two weeks since I purchased it and it still doesn't work!Hi,
I’m sorry to hear that! Not sure why it worked for me but not for you. I’d like to check the steps you made just to make sure…
What OS or you using?
I removed Lightroom from Creative Cloud. – So there is no error showing.
I downloaded the: Lightroom_5_LS11_win_5_2 from the link.
Unpacked it to the desktop (any folder will do).
Then I navigated to the folder and installed Lightroom_5_LS11_win_5_2.
Re opened CC and clicked install. It then install the 5.3 update.
If you followed all these steps and still have no luck then A, let me know. And B, you may have to wait for Adobe to fix the issue.
I’ll troll the internet for you too.
There are still more things we can try, so don't give up!
I love Lightroom and feel your pain!
Thanks,
Mike -
PC Suite Installation Operation Failed, help pleas...
I've just bought a nokia E51 and i can't get the pc suite to install.
The disc that came with the phone has installed the drivers etc, and a newer version of pc suite was found 6.85.14.1 which it downloaded.
However during the installation process it only ever gets to step 5/6 and the message "installation operation failed" comes up with " another installation is already in progress. Complete that installation before proceeding with this install"
I don't have any other installation going on at the same time. Is there something in my computer stopping this installation? (I've got windows XP)
Cheers
Message Edited by helthea on 20-Mar-2008 02:12 AMThis message was posted in 2008. It is now 2011, there is no solution placed in this thread, and the problem still exists. Incredible.
I have just tried to install PC Suite (downloaded from Nokia site about a week ago), and can you believe it, the installation still stops at step 5/6 with the same message Installation Operation Failed with not a scrap of additional information about why. I have disabled Realtek drivers (incompatibilities are documented), tried reinstallations etc
Having done some Carbide/Qt/C++ development for Symbian, I am aware that there is usually something that doesn't work, and I have developed countless workarounds for the many problems (its the only way), but this one currently has me stumped.
I would appreciate any tips anyone has how to find out more about this installation failure. Is there a log that tells one what led to the failure, etc ? Thanks. -
My Photoshop Elements 9 stopped working a couple of weeks ago. When I clicked the PSE button nothing happened. I tried this several times over a few days and it still failed. I uninstalled the program and re-installed it. It worked well. Then I tried to install the Update 9.0.3. The download was almost successful. When it was about to show 100% successful for the download, an error message said the installation had failed and that I should try later. I tried this many times over a few days and the same result occurred. I tried troubleshooting and the answers to questions, but I could not find an answer. I don't know where to go to see if anybody has answered my question. How can I install Update 9.0.3?
Colin HansenTry downloading and installing the 9.0.3 updater from here:
mac
Adobe - Photoshop Elements : For Macintosh
windows
Adobe - Photoshop Elements : For Windows -
i ve updated my i pod touch to version 6.0.1. Installation got failed with some error msg, and now my i pod is not getting detedted in my system.Help me to fix it up.
What's the error mesage?
Maybe you are looking for
-
How do I update my contacts on my MacBook pro from my iPhone or iMac?
my contacts on my MacBook pro are out of date. How do I update them from my iPhone or Imac?
-
Have lost sound on my hp g6000!
laptop c. 18 months old always been fine. Suddenly have lost all sound...the 'speaker' icon on bottom right of screen has vanished too. Any help gratefully received please! Best wishes, Kevin tech 'no' !
-
What is SAP recommended approach to create multiple Sender Idoc_AAE adapters channels?
Hi All, We have more than 100 interfaces which receives Idocs from multiple SAP ECC Systems. What is the best approach to use Idoc_AAE sender adapter with multiple communication channels for One system and for multiple SAP systems as well. Q) How man
-
Onblur with TextInputFiled with Flex 3.
Hi , I want to have something onblur facility with my TextInput Field . Means after the user presses tab from the TextInput i want to do a databse connection to validate that field . is there anything like onblur in Flex 3 . Thanks .
-
Word doc import/export and line spacing differences with Pages '09
When I save or open a Word .doc, the default line spacing differences messes up the document formatting, the document ends up being more pages in Pages than when I open in Word:Mac. One work around I learned about on this forum is to set the line spa