Installateur : problème d'accés au clé registre

Bonjour,
J’ ai développé une application labview incorporant des clés registres. Actuellement le programme fonctionne correctement en local (machine avec labview). Mais lorsque je crée un exécutable et que je l’ importe sur une autre machine vierge (sans LV) il affiche : Accès au registre distant impossible donc impossible de créer la clé.
Ma question est: Dois-t-on rajouter des modifications lors de la création du fichier .exe pour qu’ il prenne en compte les clés registres ou pas ?
NB : je dispose des droits administrateur donc c’ est pas ça le problème
Merci pour votre réponse
Bien cordialement

Salut,
Je pense que Roderic a raison, c'est surement et simplement que le Runtime LabVIEW n'est pas installé.
Pour installer le moteur d'execution sur une machine ne possedant pas LabVIEW, il suffit de créer un Installeur dans ton projet LabVIEW, de la même manière que tu as créé un Executable.
Dans les propriétés de ton Installeur, n'oublie pas de rajouter ton executable dans les fichiers sources et coche "Selectionner automatiquement les installeurs recommandés" qui sont les moteurs d'execution LabVIEW et VISA. De cette façon, ce fichier Setup installe les moteurs d'execution et ton executable en même temps. (Pour se faire plaisir, LabVIEW permet également de personnaliser les informations des boites de dialogue, comme les messages de bienvenue ou les bannières personnalisées...)
Installer un Runtaime LabVIEW pour la première fois sur un poste prend un peu de temps, de l'ordre de 10 ou 15mn, donc sois patient... ^^
Bilsix

Similar Messages

Problème d'accès à iWork sur iPad 2 depuis maj du 7 décembre

Je n'arrive plus à accéder aux 3 applications d'iwork depuis la dernière mise à jour du 7 décembre . Cela fonctionne sur mon iPhone 4 s mais pas sur mon iPad 2 , l'écran reste vide .... Help me please....

Bonjour,
Ce site est plutôt en anglais ... (pour avoir des réponses).
Moi j'ai acheté le mien fin juillet à FNAC Cannes. Lion était installé et j'ai fait l'update ML quand il est sorti. J'aurais mieux fait de m'abstenir. Sous Lion je n'avais même pas vérifié si j'avais bien les 7 h annoncés...
Si vraiment le votre vous a été livré avec ML installé usine, c'est que le problème vient des versions successives, 10.8.1 et 10.8.2.
Il faut donc patienter jusqu'à la prochaine livraison ML (10.8.3 ?) et espérer que l'autonomie de départ soit restaurée !
jm

Problème d'accès au dmz à partir de l'externe

Bonjour,
Comme je suis débutant dans le domaine, je vous prie de m'aider à résoudre mon problème. en faite j'ai un firewall ASA 5510 qui est encore neuf, l'objectif est de mettre en place une zone DMZ pour publier un serveur web dedans. depuis les recherches que j'ai fait, j'ai pu la mettre en place et établir ces accès:
DMZ ==========> outside OK
INSIDE ==========> DMZ OK
DMZ ============> Inside OK
le probème c'est que j'arrive pas à accéder à mon serveur web qui est dans la zone DMZ à partir de l'externe. Outside =======> DMZ NOK
Pour être plus claire, j'ai mit en joint le fichier "sh run". je vous prie de jetter un coup d'oeil et me dire à quel niveau le problème existe ?
Cordialement.

You would need to configure static PAT on port 80 as well:
static (DMZ,Foptique) tcp interface 80 10.10.10.2 80 netmask 255.255.255.255
(the above is assuming that your web server ip address is 10.10.10.2).
Actually, the following global statement should not include 10.10.10.2, if that is your web server ip address:
global (DMZ) 1 10.10.10.2-10.10.10.50 netmask 255.255.255.0

Problème d'accès aux outils

Bonjour
Je suis sur PSE6 et depuis peu, je ne peux plus accéder aux différents outils. j'ai uniquement la main à la place des outils sélectionnés.
Avez-vous une idée de l'origine du problème et surtout comment le résoudre
Merci d'avance et bonne année

Vous pouvez choisir Fenêtre-> Outils, puis choisissez l'outil de la barre d'outils sur le côté gauche

Audigy 2 Platinum eX Installation Probl

I'm having mind-bending problems installing my new audigy 2 Patinum eX soundcard.
Current PC config is:
Dell Dimension 8250
Pentium 4 2.66GHz,
52Mb RAM
WINDOWS XP SP2
I previously had a Soundblaster Li've! value (Dell OEM) card.
I had all sorts of problems with nothing but random clicking etc. on first installation. Since then I've been through the manual uninstall on the knowledgebase (Solution ID 72) and reinstalled from the CD and applied the latest driver updates via the software autoupdate on this site. It (mysteriously) suggested that soundfonts were a critical part of the installation so I let it go ahead. The card seemed to work OKish after that but with more clicks (but MUCH better than JUST the clicks before). This was late last night and I shut down and went to bed - upon getting up this AM I started up the PC and no I have complete silence EXCEPT that the 'Intro to Windows' sound that you get as it opens up worked (!?!?!?). Since then nothing, no sound from Winamp, no sound from games. Infuriating and why would a reboot cause the thing to stop working?
I should add that it is silent from both the line out socket on the PCI card AND the headphone socket on the external unit.
Any tips of what to try next gratefully received, I'm pulling my hair out here. Pretty soon the old Li've card will be going back in and this will be going back to the shop while I figure out which Non-Creative card to go for.
Cheers,
Greg.

I have a simular problem. On the first boot of the day my system will freeze, could be 2sec in, or 2 hours. Once i restart it runds like a dream. Now confirmed it is soundcard drivers by process of elimination. What drivers did you install to get it working without the freezing?

Nokia 3250: Application/Themes installation proble...

Hi...i recently purchase a Nokia 3250 but I'm facing a problem:any themes/application installed in memory card doesn't work and theme resets after switch-on the handset but if that application is installed in phone memory, it works after switch-on the handset.
I install all the software properly provided by nokia like snake game,themes....by using PC Suite.
I face the problems when i follow the following steps:
Problem 1:
1-I install any software (e.g:snake game) through Application manager (Pc Suit) in memory card.
2-I launch that software (snake game) just after installation it works properly.
3-Now i switch-off the hand set and than switch-on it.
4-I try to launch that software (snake game) again but it doesn't response.
Problem 2:
1:There is a image in my Memory card.
2: I set that image as a wallpaper.
3-Now i switch-off the hand set and than switch-on it.
4-Wallpaper reset to default one.
Problem 3:
1-I install a theme through Application manager (Pc Suit) in memory card.
2: I apply that theme in my hand set.
3-Now i switch-off the hand set and than switch-on it.
4- Now theme reset to default one.
i want to know is it my handset problem or OS problem....?
plss help....

The 6102 is an S40 (Series 40) 2nd edition phone, and rather old, already as S40 is already at 5th edition (plus various intermediate "feature packs").
I think the 6102 supports themes, then they come in .nth files (not .sis or .sisx, which are for S60/Series 60 phone models) and only when they're created with Nokia Series 40 Theme Studio v1.*. Newer themes created with v2.* of the tool, requires newer phones.
The tools are here:
http://www.forum.nokia.com/info/sw.nokia.com/id/7e78403b-ce27-42c3-ba3c-d8629da7622a/Nokia_Series_40...

Zen Micro 6gb installation probl

Ok, so Iv'e sent in a 5 gb zen micro twice now because of that headphone jack problem, and this time when they sent me a new one, they "upgraded" me to a 6gb. Well, I try to use this 6gb with the software i have installed from the last Micro I had, and my comp will not recognize it. So I try to user the cd that came with my old Micro, and it will not install right. When they sent me this 6gb, the only thing they sent me was the Micro and its battery, so I have no way to know if the cd that comes with a new 6gb is different form a 5gb cd, because if it is, then am I screwed?

A firmware basically is what makes an electronic device tick. It is the software responsible for every and all functions.
The Zen Micro has two versions of firmwares:
The original version works with Creative's own protocol and thus needs the installation of drivers for the system to recognize it. However it will function with all Windows versions while there also is unofficial support for Linux and MAcOS.
The second version functions using MTP, a protocol made by Microsoft and as such it is only supported by Microsoft's Windows Media Player 0 under OSs that support it (which basically only are WinXP and Vista...)
The simplest way to see which firmware you have is to look in the Micros' menu under System->Information. There you'll see firmware version.
If they both have version (..0 being the latest) then you'll need drivers for the both. As I already said, when I tried to update the drivers without uninstalling the old ones the drivers were installed but they wouldn't work.
First of all make sure the player(s) is(are) connected to the PC FIRST.
Mind you, in my case the latest drivers were already installed (I updated them but then they wouldn't work, remember?). Now here's the thing:
When I opened the drivers properties I saw that the driver was DISABLED. (under General, device usage)
Ok, I enabled it, nothing happened. Then I tried to update the drivers. Here's what I did:
I put the CD with the original drivers in the dri've and selected for windows to look for the best drivers. After some time they indeed appeared to have found a better match and then they started installing them. After the installation was complete the driver's version was the same as rhe one BEFORE the "update" (since I had already updated to the latest version). However the moment the drivers were updated the device was finally recognized by the system, not even a reboot was needed...
You could try doing that too, if that won't work then you could try DLing the LATEST drivers (along with the Zen Micro Explorer) and install them AFTER uninstalling the old ones and REBOOTING. Again, it is important having the player(s) connected BEFORE starting the installation.
If after all that you still can't connect it ask again!
Cheers!Message Edited by Keyper7 on 02-9-200604:37 PM

Problème pour accéder au menu 3D dans Photoshop CS6

bonjour, je viens de télécharger la mise à jour de Photoshop CS5 par la CS6 et dans le menu je ne peux pas accéder au menu 3D. Je pense que ce doit être à cause du fait qu'il soit en 64 bits, comment faire pour changer en 32 bits ? merci

Bonjour,
La première chose est de vérifier si votre carte grahique a minimum 512Mb de mémoire.
Vous pouvez faire un CMD+I sur Photoshop ,vous aurez le moyen de démarrer en 32bits mais cette option a disparu sur les derniers MAC OS .
Cordialement ,

Problème d'accès au dossier elements 13

Bonjour,
dans l'organizer elements 13, lorsque je clique-droit sur une photo, j'ai dans le menu déroulant la possibilité d'accéder au dossier contenant cette photo. Après l'avoir fait une fois, si je veux recherche une autre photo, le menu déroulant après cliquage-droit me montre "accéder au dossier" en grisé, et donc est inutilisable. J'ai beau cherche, je ne vois pas comment réinitialiser cette fonction.
Merci pour votre aide
Léon

You would need to configure static PAT on port 80 as well:
static (DMZ,Foptique) tcp interface 80 10.10.10.2 80 netmask 255.255.255.255
(the above is assuming that your web server ip address is 10.10.10.2).
Actually, the following global statement should not include 10.10.10.2, if that is your web server ip address:
global (DMZ) 1 10.10.10.2-10.10.10.50 netmask 255.255.255.0

Creative Zen - Installation Probl

Hi there,?I was installing my Creative zen and my computer crashed out half way through the installation process. I tried Uninstalling the program but it will nor unistall as there is an error, i tried re installing it but it will not let me and i tried using the repair button when the disk is put in and it wont let me do that either. Has anyone got any suggestions on how i might be able to fix this problem. Does the program have to be installed for me to use it, can i just use it like a portable dri've and move files over into it's?ThanksChris

Same problem, purchased my creative zen Micro 0-0-06. Noticed 4-25-06 that I can not turn on my zen with on/off switch. I can however get my zen on by plugging in usb cable. Very frustrating since I have taken good care of device. $78.00 did not give me many day of usage. If you find a solution to the prob let me know. Thanks.

*sigh* zen micro installation probl

from searches, i see that this is common. haven't found a good solution to it yet, though.
i just bought a zen micro 6GB for my girlfriend. (awww). i have XP, and installed everything on the disc except acrobat and the aol shortcut.
creative mediasource installs fine .... the zen micro explorer installs fine .... but when i plug the player to the computer, it ) doesn't charge and 2) isn't recognized.
there is a yellow question mark on its usb port when i search for it.
what am i doing wrong?

Your chances of getting it to work when XP has a service pack is greatly increased. There are some who have got their player working on XP without a service pack, but on many systems a service pack is necessary. As far as I can tell it doesn't matter if you have SP or SP2 installed, there is no difference in success rates.

Zen 8GB installation probl

I've downloaded the Zen Media Explorer software to put on my computer (my installation disc is snapped so can't do it any other way), tried installing it but it comes up with an error message each time saying "setup is unable to detect a supported product on your system. Click the Retry button to re-detect your device and continue the installation". I have my Zen plugged into my laptop. I've previously installed this and there were no problems, so I don't understand why it isn't working this time around. Help is appreciated

There's a lot of good info in the firmware update sticky thread.
I got my Zen Touch 40Gb a week ago and it's taken me that amount of time to get it to where I'm happy with it. The v to v2 firmware upgrade is a pig. I thought I'd broken the Zen. Couldn't continue f/w upgrade because it stopped being recognised by XP half-way through and would only re-boot to recovery mode.
If you are on version 2 firmware (menu->information->version) my advice would be to un-install ALL Creative software and drivers. You don't need them on Windows XP and Windows Media Player should recognise it nati'vely if you are up to date with patches.
What finally cracked it for me was deleting my USB host controllers and hubs and then re-scanning hardware to bring them back. So I think I might've had a problem with my USB drivers (which may have caused problems on the firmware upgrade).
With 2..0 firmware (not sure about previous versions) you can sync music with WMP and can transfer data files back and forth because the device shows up as Creative Zen Touch in My Computer.

Installation problème

Bonjour à tous,
Après le téléchargement de mountain lion impossible de l installer. Que je lance l instal la barre bleu de chargement ne bouge pas d un millimètre même au bout de 3h .... Que dois je fair ? Merci d avance

Hi Bstam
Thank you for visiting our English HP Support Forum. We are only able to reply to posts written in English. To insure a quick response it would be advisable to post your question in English. The following links are here to assist you if you prefer to post in the following Language Forum.
English: http://h30434.www3.hp.com
Spanish: http://h30467.www3.hp.com
French: http://h30478.www3.hp.com
Portuguese: http://h30487.www3.hp.com
German: http://h30492.www3.hp.com
Korean: http://h30491.www3.hp.com/t5/community/communitypage
Simplified Chinese: http://h30471.www3.hp.com/t5/community/communitypage
I Work for HP

Audigy 2 OEM installation probl

Hi all,
Basically im here to moan and complain :P
Bought audigy 2 card from overlcockers.co.uk
installed into machine, machine recognised new audio control card, cant wait i think to myself whilst i enjoy 24 bit sound rather than crappy realtek 97 on board audio i using.
Now to get drivers, go to soundblaster.com click on auto update web finds i have the audigy 2 card installed and recomends the right set of drivers.
go to install them and get error message saying "Setup can not find the required set of components, etc etc", hmmmm i thought to myself.
Basically i've spent 2 days and roughly 0 hours trying to install drivers all to no succes for this card. Before any of you say try this try that, i have tried EVERYTHING.
Changed PCI slots, tried different drivers, reformated PC, etc etc. Everything some one has mentioned on a forum i have tried.
So i emailed creative, "Sorry sir, but you can not get this working without the original installtion CD, we have no working drivers for this card on the website, only updates"
Great, whats the friggin point of selling an OEM with no CD when you need the CD to get it working?
Im friggin pissed, if anyone can send me an iso of the cd (which i have found on the net but it downloads at 0k a second and its 566 meg big) can you email me at [email][email protected]][email protected][/url]
All the forums i've read about this loads of people have had the same problem, its something to do with OEM hardware not having a hardware identifier on it and therefore the web drivers wont recognise the card is installed.
This thread may get deleted im sure by someone at creative for me swearing in it, but seriously im so unhappy with creative and the audigy 2 oem card i have that i've just got to the point where i dont care,
VERY UNHAPPY CUSTOMER, i will be really happy if some one at creative does something for me so i can get the soundcard working.

Thanks guys for responding to my post,
Ive tried everything that you have mentioned and still have no success, the kx drivers dont seem to have the audigy 2 oem driver (which is the sb0400) and when i try to install the generic driver my machine crashed and reboots with a "windows has recovered from a serious error" message.
The guide of how to properly install the soundblaster drivers i've already tried to no avail just to find the same "Setup did not find the required set of hardware on your machine" error message.
Im now sitting in my mates bedroom with my PC set up (having a LAN :P), and tried his audigy oem installation CD and still i get the same error message (just to remind you i have the audigy 2 OEM card, hey it was worth a try)
Im now at the point where i cant get my hands on an audigy 2 OEM CD as the helpdesk from soundblaster has refered me to my "vendor" and its now the weekened and they arent open till monday.
To say im furious is a bit of an understatement as i now have to use my realtek 97 onboard sound and has ruined my LAN party.
Im now contemplating purchasing a retail card from PC World and putting the OEM card back in the box and taking it back to PCWorld for a refund LOL.
My advice, dont purchase an OEM card PERIOD.

Creative zen touch 20gb installation proble

i've had a look through the forum for help, so apologys if this has been posted else where. Ive just got myself a new laptop and have installed or should i say tried to install the software for my zen touch from the installation disc, bearing in mind this worked perfectly on my old laptop. i've?installed it from the disc, the problem im having is its saying my music libary is corrupt, but i've not got any music libary loaded on the pc, also is says i should download Microsoft Jet 4.0 Database Engine Service Pack 8 :smileyindifferent: any idea what thats for ? it wont even recognise my touch is connected !?i have got windows media player installed where as i had wmp 0 on my old laptop, could this be a problem ??im at a loss as what to do, i thought installing from the disc should be straight forward like it was the last time i did it, but alas no ?any help very appricated.

Pob wrote:
Hi folks,
My old computer running XP recently gave up on me and I now have a new computer using Vista.
I have lost the cd I got with my Zen Touch as it was over 5 years ago now but it still works perfectly!
I want to set up Creative Media Player on Vista so I can start transferring music again but I have heard that if I download the firmwear I will lose all the songs that are currently stored. I really don't want this to happen as most of my music was contained on my old PC and it will be very hard to locate it all again so if there was a way I could just set up Creative Media Player the same way I had it before, without losing all my current music, that would be great!
Any help much appreciated.
Thanks,
Pob
This should get you going? http://mrinternet.wordpress.com/2007...ether-finally/

Installateur : problème d'accés au clé registre

Similar Messages

Maybe you are looking for