Installation issue with Scanjet G4050 with Windows 8.1 64 bit

I have recently replaced aa old PC with an HP Envy 23, operating system windows 8.1, 64bit. I am now trying to install my Scanjet G4050. Having downloaded the software HP Scanjet G4050 Photo Scanner Full Feature Software and Driver I am now trying to run it. Two hours after starting the install it is still at 'checking system' and has not progressed. This is the second attempt, having tried last night and had to stop after an hour with it still 'checking system'. I have (temporarily) switched off antivirus/firewalls in case they were an issue. I had no issues with this installation in the past on Vista.
Any ideas what to try next?

@barkerlee
‎Thank you for using HP Support Forum. I have brought your issue to the appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact. Additionally, keep in mind not to publicly post ( serial numbers and case details).
If you are unfamiliar with the Forum's private messaging please click here to learn more.
Thank you,
Omar
I Work for HP

Similar Messages

I am working on a MacBook Pro (13-inch, Mid 2009) with boot camp running Windows 7 pro 64-bit. Windows crashes quite often now-a-days and I need to get this fixed. I heard that updating boot camp can help. Currently I am running Version 3.0.4 (322).

I need to know which update(s) I can apply to help stabalize the system.

Typing the body of the thread message in the title, huh? -)
I am working on a MacBook Pro (13-inch, Mid 2009) with boot camp running Windows 7 pro 64-bit. Windows crashes quite often now-a-days and I need to get this fixed. I heard that updating boot camp can help. Currently I am running Version 3.0.4 (322).
Only Apple could hamstring and tie Mac OS to Windows. There isn't any other than whether you can download the drivers into Windows (you can) but Apple puts a block on the installer setup even if your mac does not support it.
Windows 7 needs at least Boot Camp 3.1 and 3.3 is what you should already have. And you are not getting security updates if you don't have at least 10.6.8 as was pointed out. --- you arent using Software Update as you should. And you should backup and clone Mac (and Windows) as well.
You need Mountain Lion to use Boot Camp 5.x which supports Windows 7 & 8 and 64-bit.
I would upgrade to Lion if you can realizing that Rosetta and PowerPC are no longer supported though.
Mac 101: Using Windows on your Mac via Boot Camp
https://support.apple.com/kb/HT1461
http://www.apple.com/support/bootcamp/
Helpful Apple Support Resources (Forum Overview)
Boot Camp Support
Boot Camp Manuals
Boot Camp 5.0 Drivers
http://support.apple.com/kb/DL1638
Frequently asked question
http://support.apple.com/kb/HT4818
http://manuals.info.apple.com/en_US/boot_camp_install-setup_10.7.pdf
http://manuals.info.apple.com/en/Boot_Camp_Install-Setup_10.6.pdf
http://manuals.info.apple.com/en/Boot_Camp_Install-Setup_10.6.pdfcreate a Windows support software (drivers) CD or USB storage media
http://support.apple.com/kb/HT4407
The Boot Camp Assistant can burn Boot Camp software (drivers) to a DVD or copy it to a USB storage device, such as a flash drive or hard drive. These are the only media you can use to install Boot Camp software.
https://support.apple.com/kb/HT4569
http://manuals.info.apple.com/en_US/boot_camp_install-setup_10.8.pdf
Instructions for all features and settings.
Boot Camp 4.0 FAQ Get answers to commonly asked Boot Camp questions.
Windows 7 FAQ Answers to commonly asked Windows 7 questions.
http://www.apple.com/support/bootcamp/
Is there a download of the Boot Camp 5 Support Software if I'm not using OS X Mountain Lion v10.8.3?
Yes, you can download the Boot Camp 5 Support Software here.
http://support.apple.com/kb/DL1638
How do I use the Boot Camp 5 Support Software I downloaded from the web page?
The download file is a .zip file. Double click it to uncompress it.
Double-click the Boot Camp disk image.
Copy the Boot Camp and "$WinPEDriver$" folders to the root level of a USB flash drive or hard drive that is formatted with the FAT file system (see question below for steps on how to format).
Install Windows, leaving the flash or hard drive attached to the USB port of your Mac.
Installation of the drivers can take a few minutes. Don't interrupt the installation process. A completion dialog box will appear when everything is installed. Click Finish when the dialog appears.
When your system restarts your Windows 8 installation is done.
Note: If the flash drive or hard drive was not attached when you installed Windows and was inserted after restarting into Windows 8, double-click the Boot Camp folder, then locate and double click the "setup.exe" file to start the installation of the Boot Camp 5 Support Software.
How do I format USB media to the FAT file system?
Use Disk Utility to format a disk to use with a Windows computer. Here's how:
Important: Formatting a disk erases all the files on it. Copy any files you want to save to another disk before formatting the disk.
Open Disk Utility.
Select the disk you want to format for use with Windows computers.
Click Erase, and choose one of the following from the Format pop-up menu:
If the size of the disk is 32 GB or less, choose MS-DOS (FAT).
If the size of the disk is over 32 GB, choose ExFAT.
Type a name for the disk. The maximum length is 11 characters.
Click the Erase button and then click Erase again.
Which versions of Windows are supported with Boot Camp 5?
64-bit versions of Windows 8 and Windows 7 are supported using the Boot Camp 5 Support Software. If you need to use a 32-bit version, you need to use Boot Camp 4 Support Software, and you must use Windows 7. 32-bit versions of Windows 8 are not supported via Boot Camp. For a complete list of Windows OS support, click here.

I have a HP Pavillion all-in-one with AMD processor running Windows 8.1 64 bit. Flash Player 16.0.0.235 with all current drivers. I'm consistantly experiencing a green sceen on all Flash Player videos but I have sound.

I have a HP Pavillion all-in-one with AMD processor running Windows 8.1 64 bit. Flash Player 16.0.0.235 with all current drivers. I'm consistantly experiencing a green sceen on all Flash Player videos but I have sound.

[discussion moved to Using Flash Player forum]

Having trouble with itunes update. Error with itunes64.msi. Windows 8.1 64 bit. Thanks.

Having trouble with itunes update. Error with itunes64.msi. Windows 8.1 64 bit. I tried uninstalling, but I am stuck now trying to reinstall.
It says itcan't find the itunes64.msi destination folder.

(1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
(2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
(3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
(4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
(5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

HP Scanjet G4050 and Windows 7 Home Premium Ver 6.1

I bought the G4050 photo scanner years ago and it worked fine with my old laptop windows XP operating system for the time I had it. But shortly after, I upgraded my laptop to a Dell XPS with a Windows 7 Home Premium. I've never been able to use my scanner since and its been sitting in a box for years now collecting dust. Is there anyway I can make the G4050 work with my Dell XPS lap top which operates with Windows 7 Home Premium operating system? Or am I better off bringing the scanner to the dump after only having ever used it a couple of times. All this new technology has made life very much more complicated if you ask me.

Hi there @yvans2105,
I saw your post about the issue you are having with using your Scanjet G4050 Photo Scanner with your Windows 7 system.
My suggestion is to download and run the full driver and software and install the scanner on your computer. You should be able to use it afterwards!
HP Scanjet G4050 Photo Scanner Full Feature Software and Driver
If the troubleshooting does not help resolve your issue, I would then suggest calling HP's Technical Support to see about further options for you. If you are calling within North America, the number is 1-800-474-6836 and for all other regions: click here.
Have a great day
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

HP Scanjet G4050 in Windows 7 (64 bit) Error specification 4,[(2,0,8004154),(0,0,0),(3,56,0)]

HP Scanjet G4050 does not get well installed in Windows 7 (64 bit).
Running the programme "HP Print and Scan Doctor". Result: Errors translated for you from Dutch, so I do not have the original error formulation:
Device control: correct
Warning in Control Driverprogramme "There is no communication between the driver and the device.
Windows (WIA)-scan: correct
Warning in HP Twain Scan Error specification 4,[(2,0,8004154),(0,0,0),(3,56,0)]
Register: correct
Warning in HP Scan Flow Manager: part of the software is not installed. Uninstalling (even deep uninstalling) and reinstallation of the drivers and software does not change the results.
Prepanel testing: Everything is allright with your scanner ,although not all tests could be performed.
You can scan with Microsoft Paint.
In addition:
Firewall off - did not help.
Deep uninstallation and reinstallation: did not help.
Is there anybody with an idea about how to identify and obtain the missing elements in my downloads?

In addition:
When checking the installed files, there is nothing called "SolutionCenter".

Where can I get photosmart software that goes with scanjet G4050

I bought my scanjet when I had XP to digitize slides and it worked great.
Haven't used it in a couple of years. Now I have upgraded to windows 7 (64) and I have more slides to digitize.
The scanner is not recognized by hp or by scanvue (which I was using both a couple of years ago) even when I downloaded a new driver for windows 7.
When I plug the scanner in, the computer says it recognizes it and windows is happy with controling it, but is so limited!
I have tried unplugging power source and replugging a half hour later. I have tried all the usb ports. I have tried scanvue software but I guess this machine is not compatible any more. I have tried rebooting the computer...
I have tried uninstalling and then installing hp driver for that scanner for Windows 7. No recognition. No software.
I cannot find my original installation disk
I cannot find the photosmart software on my computer.
Any suggestions will be welcomed!!
This question was solved.
View Solution.

Try reinstalling the full feature software again but only after you uninstall the corrupted driver/software first and ScanVue.
Install Revo Uninstaller (free edition) and run the program in Advanced Mode to find any left over files in the registry.
Clean anything Revo finds in the search.
Manually look for any folders/files left over for the HP scanner in the AppData folder (In the Windows Explorer, go to the View options and check the Show Hidden Files box to enable the AppData folder to be seen).
Go to the Programs folder and look for an HP folder for the Scanner and delete it
Do this for VueScan also.
Now redownload and reinstall that full feature software again. Follow the prompts during the installation.
Let me know how that turns out.

Front Panel Buttons Does Not Work With scanjet 7650 using Windows 8.1

I am unable to use scan doctor and my front buttons since I moved to Windows 8.1 using the above scanner.

Hi m_heistand.
Please verify that the MF8580 is registered in the MF Network Scan Utility by following the instructions below:
Open the system tray in the bottom-right corner of the desktop and click the blue scanner icon.
Next, select the check box for the MF8500 series, and then click [OK].
Place the machine in [Remote Scanner] mode and scan a document using the MF Toolbox.
If you are still unable to scan after the machine is registered in the scan utility, we recommend that you contact us at 1-800-OK-CANON (1-800-652-2666).
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Problems with Fireworks CS3 in Windows 7 Pro 64 bit

I have recently upgraded to Windows 7 Pro from Windows XP Pro. My Fireworks CS3 is having a problem. I cannot select items in the left side menu bar if I minimize or move the Fireworks CS3 window. If I have just opened the window it works, but minimize the window or move it and the toolbar stops working.
This problem is not unique to my machine. 2 other people are having the exact same problem. Here is the link to the Windows 7 forum:
http://www.sevenforums.com/software/26957-adobe-fireworks-cs3-issue.html
We sure could use some help. This is one of my bread and butter programs.

I'm happy to hear you have other work-around alternatives!
Businesses with mission-critical software usually are very careful to research that their software will run on any proposed new system or that alternative software is available. This is the main reason that Microsoft had to continue supporting XP longer than they intended. Too much business-critical software ran on XP but did not run under Vista and would take some time before it would be upgraded to do so...if at all.
If you have "bread and butter" apps, then it was your responsibility to make sure that you could run them once you upgraded. Adobe's software worked more or less as advertised for the operating systems that were available at the time the versions were released. That's reasonable. Expecting indefinite support into the future is not.
Fireworks isn't a $2000 product. Adobe continues product development, yes. They've moved on to CS4 and its patches. You can upgrade to FW CS4 for about $150. The system requirements for FW CS4 do not include Windows 7; note that Fireworks is only certified for 32-bit operating systems:
http://store.adobe.com/store/en_us/popup/software/fireworks4/systemreqs.html
However, there's a statement about CS4 applications (in general) working with Windows 7:
http://www.adobe.com/products/fireworks/faq/?anonymous_element_1=4
And you'd want to get the recent updater:
http://www.adobe.com/support/fireworks/downloads_updaters.html
speedtigger wrote:
... It is probably not a huge problem to fix for an Adobe engineer.
If the feature worked under Vista but does not work under Windows 7, then that means that the problem probably lies somewhere in how the program communicates with the OS. The problem is not isolated to the tens - possibly hundreds - of thousands of lines of Fireworks code, but in how that code interacts with the Windows 7 APIs. To solve this problem is not the work of "an Adobe engineer." It's the work of a project team. It's the work of a project team which would have to be pulled off development of Fireworks CS5 for a few months to resurrect the old CS3 code, get familiar with it, and try to track down and solve the problem, then package up, test, and release a patch . By pulling resources off CS5 development, CS5 would be delayed or quality inversely impacted. Since CS3 is not a current product for sale, I can't see Adobe making this investment. There's no return on it, where there would be a return on getting a quality FW CS5 out the door on time.

Downloaded trial version of Acrobat XI Pro. Attempted to launch but dialog box indicated that the version of AcrobatPro_11_Web_WWMUI.exe is not compatible with the version of Windows (check if 32-bit or 64-bit version is needed). I'm running Windows 7 Pro

Could not launch a trial version of Acrobat XI Pro due to compatibility even though I'm running Windows 7 on a 64-bit machine. Any ideas why not?

Acrobat XI is a 32-bit process, but should run on a 64-bit machine unless something is set to lock out 32-bit processes.

Scanjet G4050- How to scan multiple slides at one time with Image Capture

Using Scanjet G4050 with Mac and OS 10.6. Thus using Image Capture to control scanner. When using the slide template for 16 slides, Image Capture only allows me to select one slide at a time.
Is there a way to fill the template with 16 slides and have Image Capture scan all 16 slides without having to select each one in turn? It is a real pain to have to direct each scan.

Hi jpbear
I am going to take credit for finding the solution that the HP Photo Suite from OSX 5 works in subsequent Mac OSX. Look at this web page.
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4019&lc=en&cc=us&dlc=en&sw_lang=&product=3236...
If this doesn't work for you, I am willing to guide you to finding the page. I downloaded a copy a few minutes ago and it was still available. The Photo Suite is actually an amazing set of applications but the one you want to use with your HP ScanJet G4050 is HP Scan Pro. I continue to use it with OSX 9 but other people have reported that it continues to work with OSX 10 as well. It allows me to scan the 16 slides on the bed individually with one pass. It also has some colour balancing function.
Frangelica

Where can I find a driver download for scanjet 4300c windows 8.1 64 bit

I need a free driver update download for the hp scanjet 4300c scanner using windows 8.1, 64bit

Hi @J13,
Welcome to the HP Forums!
I noticed that you are wondering where you can find a driver download for your HP Scanjet 4300c for Windows 8.1 64 bit. I am happy to look for this for you!
According to this drivers website, HP Scanjet 4300c Scanner Drivers, as well as this guide, Scanners not supported in Windows 8 or Windows 8.1. This product is not supported for Windows 8.1 64-bit. The last driver released for this product is for Windows XP.
However, as a workaround, you can try to download the Windows XP driver, found at this website, ScanJet 4300C/Cse/Cxi PrecisionScan LTX software/driver, and then run it under compatibility mode, Make older programs compatible with this version of Windows. It is not guaranteed to work, but worth a try.
Otherwise, I would recommend upgrading to a new model that is compatible with Windows 8.1. Here is a list of Scanjets that are compatible and supported, with Windows 8.1. Scanner driver and software support for Windows 8 and Windows 8.1.
Hope this information clears things up for you, and happy new year!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

USB MIDI not working in Windows 7 Pro 64-bit

The problem is that even though my devices are recognized in Control Panel/ Sound and in Device Manager, no MIDI data actually flows and I cannot sync my keyboard to the Yamaha software that edits it. The error message in the Yamaha software reads
“The following MIDI ports can not be opened at this time”. At first, MIDI was working and I could sync up, but after about a week, right around the time I uninstalled and re-installed a MS Lifecam, it failed and has not worked since.
I have been working directly with Yamaha tech support on the issue for some time. I have a Yamaha SX70 XS keyboard, which is recognized by Windows as a connected USB device. It is self-powered, not powered by USB. I am using the Yamaha USB-MIDI driver version
3.1.2 for Windows 7 64-bit (the latest driver). And the latest versions of all their editing software for Win7 64-bit. They assure me that those work for other users of Win7 64-bit. In my case though, everything shows up in Windows, but MIDI doesn’t actually
work. And I cannot sync to the keyboard due to the above error message.
Yamaha tells me that their USB-MIDI driver is installing fine on my machine, except that it’s missing a windows driver at the bottom of the driver stack. (You can see this in Device Manager, Properties/Driver tab, then Driver Details. The missing driver
is ksthunk.sys, which I think handles kernel streaming. Sounds like that would relate to MIDI data. They have never heard of this driver not showing up there, and they cannot reproduce the problem. ksthunk.sys is on my machine in c:\windows\system32\drivers\
and in the registry the image path is \SystemRoot\system32\drivers\ksthunk.sys
All devices are “working properly” in Windows Device Manager, despite that missing driver. Yamaha MIDI Driver is shown in Control Panel/Sound, and it can be worked with there (opened, closed, configured, etc.). I have also tried three different USB
cables (but those shouldn't be an issue since the keyboard is showing up in Windows).
I was also advised by Yamaha to edit registry key HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Drivers32 and remove all midi, midi1, midi2, etc entries, then uninstall and reinstall all drivers. Which I did, but it didn't help.
So far, no amount of re-installation, event viewing, uninstalling devices, numerous reboots,etc has fixed it. On this machine, that driver just doesn’t hook up to the Yamaha MIDI driver and show up in the stack.
So it looks like it may be a Windows 7 config problem on my machine, and I'm hoping someone here can give me some advice on how to fix it. The Microsoft forums contain a fair number of users reporting similar problems, some are audio and some are webcam
related. I've followed those threads, and done several of the suggestions, but haven't found a solution to this one.
This is a Dell XPS 8300 Windows 7 64-bit PC with all the latest updates, only about six weeks old. I've been struggling with the MIDI problem for most of that time. I'm an IT professional (network and systems admin), so you can be fairly technical
in your response.
Any suggestions will be welcome. Thanks in advance.

I am so glad I found keyman7's description, since I have exactly the same problem.
The problem is not related to MIDI output! I have it with a pure USB-MIDI-input device (keyboard), whichs produces "unknown externeal error" every time I try to select it as input. The same thing occurs with a USB-MIDI-Cable.
I compared the driver details from my system (Dell T1500 windows 7 pro 64 bit) with those of another windows 7 pro 64 bit. On that other system the device works like a charm (so it is not the hardware, either).
On the other system I find ksthunk.sys in addition to the modules that are listed on my system as well (beeing \windows\system32\drivers\drmk.sys, ..\prtcls.sys, ..\USBAUDIO.sys and \windows\system32\SysFx.dll, ..\WMALFXGFXDSP.dll).
Can it be some other USB driver is interfering with this driver stack? I have no idea how to figure out which one it could be. Or, it has been suggested in other threads with somewhat similar looking symptoms, ksthunk.sys has been removed as UpperFilters
entry?
Help - please!

Sun X4150 Can not install Microsoft Window 2003 Standard 32-bit OS

I have try to install Microsoft Window 2003 Standard 32-bit OS in X4150,but put the OS Media and the output show below error messages
"The system is not a supported platform"
I check the sun system handbook and releated document for this X4150 product,it have been certificated.
I try to install with Window 2003 Standard 64-bit OS,it work ok.The Window 2003 Enterprise 32/64 bit,it work ok also.
Have change the CPU Speed (lower),Update the BIOS,ELOM,the same situration.
Have anyone have this experience with the installation of window 2003 Standard 32-bit.
Tks for your help.

Hi,
Have you tried installing using the Sun Installation Assistant disc, for more info see the Sun Installation Assistant for Windows and Linux User's Guide:
http://docs.sun.com/app/docs/coll/x4150

Performance issues with class loader on Windows server

We are observing some performance issues in our application. We are Using weblogic 11g with Java6 on a windows 2003 server
The thread dumps indicate many threads are waiting in queue for the native file methods:
"[ACTIVE] ExecuteThread: '106' for queue: 'weblogic.kernel.Default (self-tuning)'" RUNNABLE
     java.io.WinNTFileSystem.getBooleanAttributes(Native Method)
     java.io.File.exists(Unknown Source)
     weblogic.utils.classloaders.ClasspathClassFinder.getFileSource(ClasspathClassFinder.java:398)
     weblogic.utils.classloaders.ClasspathClassFinder.getSourcesInternal(ClasspathClassFinder.java:347)
     weblogic.utils.classloaders.ClasspathClassFinder.getSource(ClasspathClassFinder.java:316)
     weblogic.application.io.ManifestFinder.getSource(ManifestFinder.java:75)
     weblogic.utils.classloaders.MultiClassFinder.getSource(MultiClassFinder.java:67)
     weblogic.application.utils.CompositeWebAppFinder.getSource(CompositeWebAppFinder.java:71)
     weblogic.utils.classloaders.MultiClassFinder.getSource(MultiClassFinder.java:67)
     weblogic.utils.classloaders.MultiClassFinder.getSource(MultiClassFinder.java:67)
     weblogic.utils.classloaders.CodeGenClassFinder.getSource(CodeGenClassFinder.java:33)
     weblogic.utils.classloaders.GenericClassLoader.findResource(GenericClassLoader.java:210)
     weblogic.utils.classloaders.GenericClassLoader.getResourceInternal(GenericClassLoader.java:160)
     weblogic.utils.classloaders.GenericClassLoader.getResource(GenericClassLoader.java:182)
     java.lang.ClassLoader.getResourceAsStream(Unknown Source)
     javax.xml.parsers.SecuritySupport$4.run(Unknown Source)
     java.security.AccessController.doPrivileged(Native Method)
     javax.xml.parsers.SecuritySupport.getResourceAsStream(Unknown Source)
     javax.xml.parsers.FactoryFinder.findJarServiceProvider(Unknown Source)
     javax.xml.parsers.FactoryFinder.find(Unknown Source)
     javax.xml.parsers.DocumentBuilderFactory.newInstance(Unknown Source)
     org.ajax4jsf.context.ResponseWriterContentHandler.<init>(ResponseWriterContentHandler.java:48)
     org.ajax4jsf.context.ViewResources$HeadResponseWriter.<init>(ViewResources.java:259)
     org.ajax4jsf.context.ViewResources.processHeadResources(ViewResources.java:445)
     org.ajax4jsf.application.AjaxViewHandler.renderView(AjaxViewHandler.java:193)
     org.apache.myfaces.lifecycle.RenderResponseExecutor.execute(RenderResponseExecutor.java:41)
     org.apache.myfaces.lifecycle.LifecycleImpl.render(LifecycleImpl.java:140)
On googling this seems to be an issue with java file handling on windows servers and I couldn't find a solution yet. Any recommendation or pointer is appreciated

Hi shubhu,
I just analyzed your partial Thread Dump data, the problem is that the ajax4jsf framework ResponseWriterContentHandler triggers internally a new instance of the DocumentBuilderFactory; every time; triggering heavy IO contention because of Class loader / JAR file search operations.
Too many of these IO operations under heavy load will create excessive contention and severe performance degradation; regardless of the OS you are running your JVM on.
Please review the link below and see if this is related to your problem.. This is a known issue in JBOSS JIRA when using RichFaces / ajaxJSF.
https://issues.jboss.org/browse/JBPAPP-6166
Regards,
P-H
http://javaeesupportpatterns.blogspot.com/

Installati​on issue with Scanjet G4050 with Windows 8.1 64 bit

Similar Messages

Maybe you are looking for

Installation issue with Scanjet G4050 with Windows 8.1 64 bit