Installation 12c R1 on Windows Server 2008 R2
Hello,
I had a bad idea - try the new database.
So:
1) Downloading oracle DB files, but download interrupted (lost Wi-Fi - my fault), but auth token was expired and I have to redownload 90%.
2) Installing Windows Server 2008 R2 Standard Edition (I want to install English edition, but I had only Russian one)
3) Spending a lot of time to install, and wont install.
I made some attempts (each with new OS installation):
with/without UAC, from network/local drive, desktop/server class, existing/new user, each editions, both charset... But all of them were unsuccessful.
Installation show popup errors like that:
"DIM-00019: create service error
O/S-Error: (OS 1387) ?? ??????? ???????? ??? ??????? ????? ????????? ??????, ??? ??? ?? ?? ??????????. "
Ora error
Log file have a lot of useful information, like this:
"[main] [ 2013-11-22 17:16:12.449 EST ] [KfodUtil.kfodOutput:333] Cannot run program "null\rdbms\bin\kfod.exe": CreateProcess error=2, ?? ??????? ????? ????????? ????
java.io.IOException: Cannot run program "null\rdbms\bin\kfod.exe": CreateProcess error=2, ?? ??????? ????? ????????? ????"
Any ideas what should be done for success installation?
It works as well as installed?
Interestingly, does Oracle have any testing stuff
I have no doubt that the problem in the OS localization.
But, taking into account some facts:
World population is estimated to number 7.126 billion people.
Anglosphere is about 740 million people.
I have not found information about the supported OS languages.
I'm worried about losing my non-English data.
I am for the licensed software, but a trial and registered OS has the same functionality, and displays messages/data in the same way.
I doubt that the OS registration will allow installer to properly finish and even display the error correctly. (Java strings is UTF-based, so, developers should set correct code page. Probably, because system code page can be different with console code page (cp866 for Russian). Current codepage could be view by executing "chcp" in console).
In any case Enterprise-class product should operate correctly on each supported systems, or inform about problems before.
Similar Messages
-
Dear All,
I hope someone can help me here with EPM 11.1.2.1 installation problem on my notebook - Windows Server 2008 R2 x65, 8 GB RAM, running SQLServer 2008 Express.
I installed Hyperion Foundation. The installation and configuration went through successfully.
I am facing two problems:
Problem 1
When I try to access the workspace through the URL http://hostname:19000/workspace/index.jsp, I get error:
Quote
Failure of server APACHE bridge:
No backend server available for connection: timed out after 10 seconds or idempotent set to OFF.
End-quote
Problem 2
Also, the service "Hyperion EPM Server" service not able to start. When I try to start, I get error message:
Quote
The Hyperion EPMA Server service on Local computer started and then stopped. Some services stop automatically if they are not in use by other services or programs.
End-quote
I tried checking everything but can't seem to figure out what's going wrong.
I have uploaded (1) EPM Config Manager screenshot (2) EPM System diagnostic report (3) EPM Registry editor output and (4) system services listing at
http://www.mediafire.com/?pr9l1v99w4d9u4r,c3vggxeibqkxbo2,lyzclu2aggbn8qh,8kur9gxal5b361z
It would be very grateful if someone can have a look and help me.
Many thanks in advance for any help / pointers / suggestions.
- NeilHi Pablo,
Thanks to your suggestion for database, problem #2 seem to be resolved. I am now able to start EPMA Service.
Re: Problem 1
a) Log for C:\Oracle\Middleware\user_projects\epmsystem1\diagnostics\logs\services\HyS9FoundationServices-sysout is as below
-----<start>--------
<Feb 15, 2012 4:04:47 AM > <Info> <Security> <BEA-090905> <Disabling CryptoJ JCE Provider self-integrity check for better startup performance. To enable this check, specify -Dweblogic.security.allowCryptoJDefaultJCEVerification=true>
<Feb 15, 2012 4:04:47 AM > <Info> <Security> <BEA-090906> <Changing the default Random Number Generator in RSA CryptoJ from ECDRBG to FIPS186PRNG. To disable this change, specify -Dweblogic.security.allowCryptoJDefaultPRNG=true>
<Feb 15, 2012 4:04:47 AM > <Info> <WebLogicServer> <BEA-000377> <Starting WebLogic Server with Oracle JRockit(R) Version R28.0.2-11-135406-1.6.0_20-20100624-2119-windows-x86_64 from Oracle Corporation>
<Feb 15, 2012 4:04:48 AM > <Info> <Security> <BEA-090065> <Getting boot identity from user.>
Enter username to boot WebLogic server:
------<end>-----
I am intrigued by the last line "Enter username to boot WebLogic server:" - is there anything wrong going here?
Log for C:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\FoundationServices0\logs\FoundationServices0 is as below:
-----<start>--------
####<Feb 15, 2012 12:49:49 AM <Info> <WebLogicServer> <RCPL02> <> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <> <> <> <1329324589459> <BEA-000000> <WebLogic Server "FoundationServices0" version:
WebLogic Server 10.3.4.0 Fri Dec 17 20:47:33 PST 2010 1384255 Copyright (c) 1995, 2009, Oracle and/or its affiliates. All rights reserved.>
####<Feb 15, 2012 12:49:49 AM <Notice> <Log Management> <RCPL02> <> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <> <> <> <1329324589568> <BEA-170019> <The server log file C:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\FoundationServices0\logs\FoundationServices0.log is opened. All server side log events will be written to this file.>
####<Feb 15, 2012 12:49:49 AM <Info> <Log Management> <RCPL02> <> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <> <> <> <1329324589584> <BEA-170023> <The Server Logging is initialized with Java Logging API implementation.>
####<Feb 15, 2012 12:49:49 AM <Info> <Diagnostics> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324589631> <BEA-320001> <The ServerDebug service initialized successfully.>
####<Feb 15, 2012 12:49:54 AM <Info> <Server> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324594904> <BEA-002622> <The protocol "t3" is now configured.>
####<Feb 15, 2012 12:49:54 AM <Info> <Server> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324594904> <BEA-002622> <The protocol "t3s" is now configured.>
####<Feb 15, 2012 12:49:54 AM <Info> <Server> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324594904> <BEA-002622> <The protocol "http" is now configured.>
####<Feb 15, 2012 12:49:54 AM <Info> <Server> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324594904> <BEA-002622> <The protocol "https" is now configured.>
####<Feb 15, 2012 12:49:54 AM <Info> <Server> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324594904> <BEA-002622> <The protocol "iiop" is now configured.>
####<Feb 15, 2012 12:49:54 AM <Info> <Server> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324594904> <BEA-002622> <The protocol "iiops" is now configured.>
####<Feb 15, 2012 12:49:54 AM <Info> <Server> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324594904> <BEA-002622> <The protocol "ldap" is now configured.>
####<Feb 15, 2012 12:49:54 AM <Info> <Server> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324594904> <BEA-002622> <The protocol "ldaps" is now configured.>
####<Feb 15, 2012 12:49:54 AM <Info> <Server> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324594904> <BEA-002622> <The protocol "cluster" is now configured.>
####<Feb 15, 2012 12:49:54 AM <Info> <Server> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324594919> <BEA-002622> <The protocol "clusters" is now configured.>
####<Feb 15, 2012 12:49:54 AM <Info> <Server> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324594919> <BEA-002622> <The protocol "snmp" is now configured.>
####<Feb 15, 2012 12:49:54 AM <Info> <Server> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324594919> <BEA-002622> <The protocol "admin" is now configured.>
####<Feb 15, 2012 12:49:54 AM <Info> <Server> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324594919> <BEA-002624> <The administration protocol is "t3s" and is now configured.>
####<Feb 15, 2012 12:49:54 AM <Info> <RJVM> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324594950> <BEA-000570> <Network Configuration for Channel "FoundationServices0"
Listen Address :28080
Public Address N/A
Http Enabled true
Tunneling Enabled false
Outbound Enabled false
Admin Traffic Enabled true>
####<Feb 15, 2012 12:49:54 AM <Info> <RJVM> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324594950> <BEA-000570> <Network Configuration for Channel "FoundationServices0"
Listen Address :28443 (SSL)
Public Address N/A
Http Enabled true
Tunneling Enabled false
Outbound Enabled false
Admin Traffic Enabled true>
####<Feb 15, 2012 12:49:54 AM <Info> <Server> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324594982> <BEA-002609> <Channel Service initialized.>
####<Feb 15, 2012 12:49:55 AM <Info> <Socket> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324595013> <BEA-000406> <NTSocketMuxer was built on Jan 24 2006 20:40:35
>
####<Feb 15, 2012 12:49:55 AM <Info> <Socket> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324595075> <BEA-000436> <Allocating 4 reader threads.>
####<Feb 15, 2012 12:49:55 AM <Info> <Socket> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324595075> <BEA-000446> <Native IO Enabled.>
####<Feb 15, 2012 12:49:55 AM <Info> <IIOP> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324595216> <BEA-002014> <IIOP subsystem enabled.>
####<Feb 15, 2012 12:49:59 AM <Info> <Security> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324599818> <BEA-090894> <Successfully loaded the OPSS Policy Provider using oracle.security.jps.internal.policystore.JavaPolicyProvider.>
####<Feb 15, 2012 12:50:00 AM <Info> <Security> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324600286> <BEA-000000> <Starting OpenJPA 1.1.1-SNAPSHOT>
####<Feb 15, 2012 12:50:00 AM <Info> <Security> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324600442> <BEA-000000> <StoreServiceImpl.initJDO - StoreService is initialized with Id = ldap_9V5rIdcvntKDauQNwFIW41HchnU=>
####<Feb 15, 2012 12:50:00 AM <Info> <Security> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324600722> <BEA-000000> <BootStrapServiceImpl.loadLDIFTemplate - Did not find C:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\FoundationServices0\data\ldap\XACMLAuthorizermyrealmInit.initialized, will load full LDIFT.>
####<Feb 15, 2012 12:50:00 AM <Info> <Security> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324600738> <BEA-090074> <Initializing Authorizer provider using LDIF template file C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\XACMLAuthorizerInit.ldift.>
####<Feb 15, 2012 12:50:01 AM <Info> <Security> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324601050> <BEA-090075> <The Authorizer provider has had its LDIF information loaded from: C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\XACMLAuthorizerInit.ldift>
####<Feb 15, 2012 12:50:01 AM <Info> <Security> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324601315> <BEA-000000> <BootStrapServiceImpl.loadLDIFTemplate - Did not find C:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\FoundationServices0\data\ldap\DefaultCredentialMappermyrealmInit.initialized, will load full LDIFT.>
####<Feb 15, 2012 12:50:01 AM <Info> <Security> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324601315> <BEA-090827> <LDIF template file C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\DefaultCredentialMapperInit.ldift was empty. The WebLogic provider CredentialMapper has been bootstrapped but has not been initialized with any LDIF data.>
####<Feb 15, 2012 12:50:01 AM <Info> <Security> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324601331> <BEA-000000> <BootStrapServiceImpl.loadLDIFTemplate - Did not find C:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\FoundationServices0\data\ldap\XACMLRoleMappermyrealmInit.initialized, will load full LDIFT.>
####<Feb 15, 2012 12:50:01 AM <Info> <Security> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324601331> <BEA-090074> <Initializing RoleMapper provider using LDIF template file C:\Oracle\Middleware\user_projects\domains\EPMSystem\security\XACMLRoleMapperInit.ldift.>
####<Feb 15, 2012 12:50:01 AM <Info> <Security> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324601346> <BEA-090075> <The RoleMapper provider has had its LDIF information loaded from: C:\Oracle\Middleware\user_projects\domains\EPMSystem\security\XACMLRoleMapperInit.ldift>
####<Feb 15, 2012 12:50:01 AM <Info> <Security> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324601565> <BEA-090093> <No pre-WLS 8.1 Keystore providers are configured for server FoundationServices0 for security realm myrealm.>
####<Feb 15, 2012 12:50:01 AM <Notice> <Security> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324601565> <BEA-090082> <Security initializing using security realm myrealm.>
####<Feb 15, 2012 12:50:01 AM <Notice> <Security> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324601658> <BEA-090083> <Storing boot identity in the file: C:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\FoundationServices0\security\boot.properties>
------<end>----- -
Is my OLE DB installation done correctly on Windows Server 2008 R2 64bit?
I have installed Instant Client thru Instant Client option in Oracle Database 11g Release 2 Client (11.2.0.1.0) for Microsoft Windows (x64) NOT thru Instant Client package.
Then I installed the oledb from 64-bit ODAC 11.2 Release 3 (11.2.0.2.1) for Windows x64 by executing install.bat oledb c:\oracle odac.
I find the following values in registries:
under HKEY_LOCAL_MACHINE\SOFTWARE\Oracle\KEY_odac:
NLS_LANG has the value AMERICAN_AMERICA.WE8MSWIN1252
OLEDB has the value c:\Oracle\oledb\mesg
ORACLE_GROUP_NAME has the value Oracle - odac
ORACLE_HOME has the value c:\Oracle
ORACLE_HOME_NAME has the value odac
under HKEY_LOCAL_MACHINE\SOFTWARE\Oracle\KEY_OraClient11g_home1:
NLS_LANG has the value AMERICAN_AMERICA.WE8MSWIN1252
ORACLE_GROUP_NAME has the value Oracle - OraClient11g_home1
ORACLE_HOME has the value C:\Oracle\product\11.2.0\client_1
ORACLE_HOME_NAME has the value OraClient11g_home1
I wonder whether I have done the installations incorrectly since some keys have different values between the 2 registries.I have no doubt that the problem in the OS localization.
But, taking into account some facts:
World population is estimated to number 7.126 billion people.
Anglosphere is about 740 million people.
I have not found information about the supported OS languages.
I'm worried about losing my non-English data.
I am for the licensed software, but a trial and registered OS has the same functionality, and displays messages/data in the same way.
I doubt that the OS registration will allow installer to properly finish and even display the error correctly. (Java strings is UTF-based, so, developers should set correct code page. Probably, because system code page can be different with console code page (cp866 for Russian). Current codepage could be view by executing "chcp" in console).
In any case Enterprise-class product should operate correctly on each supported systems, or inform about problems before. -
Installing Oracle 8i in Windows Server 2008 32
Hi! I'm installling Oracle 8i in Windows server 2008 enterprise for 32 bits, but it's finish with error. The error is jrew.
Somebody can install it?
Sorry by my english.
Thank!
AbelOracle 8i on windows server 2008 is not a tested/supported product.
-
Installation problem on windows server 2008 r2 datacenter edition 64bit
hi
today, i tried to install the current maxdb 7.8 release on my virtual server with a windows server 2008 r2 datacenter 64bit edition os. at the first installation, i got an error message something with "rte runtime error". at this point, the installation stopped.
because of this error, i tried to uninstall the failed installation. this was not possible, in the uninstaller, i didn't see any components, so i can't uninstall.
so i tried to delete the files manually: the entries in the start menu, and the application's path under "program files"... first, i need to kill a process named "serv.exe", that creates a tcp daemon under port 7200... after killing it, the deletion of the dir in program files was successful.
this is very very weird, now my server is "contaminated" with an uncomplete uninstallation of maxdb...
why maxdb 7.8 has problems on windows server 2008 r2 datacenter 64bit edition???
thanks for feedbacks!
regards, jan> no, because i canceled this virtual server - another method to solve this problem. (i have really no time for things like that..!)
If you take the time to give exact error messages then someone will be certainly able to help
> on windows server 2003, there are NO problems.
Windows 2003 != Windows 2008 - they use a different kernel, a different security system (UAC) and other features that may prevent a succesfull installation in the first place.
I installed a MaxDB 7.8 just today on Windows 2008 R2 and it worked fine.
Markus -
64 bit Weblogic Server 10.3.2 installation on Windows Server 2008 R2 x64 ?
Hi,
I'm trying to install 64 bit version of Weblogic Server 10.3.2 on my 64 bit OS Windows Server 2008 R2 SP2.
Firstly I downloaded "jdk-6u24-windows-x64.exe" and installed it on my 64 bit platform.
I downloaded "wls1032_generic.jar" and try to install it by the command below
"java -d64 -jar wls1032_generic.jar"
however I got the message below
Unrecognized option: -d64
Couldn't create the Java virtual machine
Any options about this problem. Where am I making mistake?Hi,
You need to make sure the following things :
1). If you want to run your WLS on W 64 bit mode then You need to use Generic Jar installer Example: *"java -jar wls1032_generic.jar"*
2). The above Jar should be installed only using a 64 Bit JVM so that all the 64 bit libraries will be available with the WebLogic while installing it. So first of all Download a 64 Bit JVM in your Woindows box.
Then just run the following command to check if the JVM is 6t4 bit or not:
set JAVA=HOME=C:\My64BitJDK\jdk1.6.0_21
*$JAVA_HOME\bin\java -version*
3). Now u can run your WebLogic Installer like following:
*$JAVA_HOME\bin\java -jar wls1032_generic.jar* -
Problems LMS-4.2 Installation on Windows Server 2008 R2 Enterprise SP1
Hi all,
During the installation of the LMS-4.2,
It passed the "Initializing" and "Copying" stages,
but, in the "Configuring", it never finishes,
Anyone had have a similar problem?
the installer is for - LMS-4.2 and the OS is Windows Server 2008 R2 Enterprise SP1Thanks for the update. Glad to know it has installed now.
There can be some port clashes and resource scarcity when other applications may be using it. Hence we recommend to have majorly LMS as the primary software on the server's.
Also, LMS is not supported in other languages installers or setups except English and Japanese.
There are a couple more things you can do/check prior to running the installation.
LMS generally need Naming convention to handle long names/path etc. By default C: has 8.3 Naming convention enabled. However if you installed on different drive (for eg E:), for which this may be disabled.
To check naming convention you can run the following command from Windows Command prompt:
cmd>fsutil.exe 8dot3name query <Drive>
Example:
C:\Users\winlau>fsutil 8dot3name query C:
The volume state for Disable8dot3 is 0 (8dot3 name creation is enabled).
The registry state of NtfsDisable8dot3NameCreation is 2, the default (Volume level setting).
Based on the above two settings, 8dot3 name creation is enabled on C:.
8dot3 needs to be enabled for all drives LMS will potentially use, including:
Drive where TEMP/TMP is located
The drive LMS is installed to
The drive LMS backs up to
Drive used for a relocated RME Shadow directory or other nonstandard paths written to.
In some cases, altering the TEMP and TMP variables to be a short path (eg C:/temp or C:/tmp) may avoid the issue, but not always.
Hence, to be safe, it is best to enable 8dot3name creation globally, either via the registry or Windows CLI
Sample command to enable globally:
"fsutil 8dot3name set 0"
Sample command to enable on one volume:
"fsutil 8dot3name set X: 0"
Note that this needs a reboot to take effect. You should not disable 8dot3name creation which already has it enabled, especially the system volume (usually C:).
For further information http://technet.microsoft.com/en-us/library/cc778996%28v=ws.10%29.aspx
-Thanks
Vinod
**Encourage Contributors. RATE them** -
Cisco LMS 4.1 Installation on Windows Server 2008 R2, Databases not created
Hi There,
As always, I am trying to install LMS 4.1 on windows server 2008 R2 and after the installation and login to the LMS I find the following:
DCRServer is down or may not be completely up. Check if the DCRServer process is running.
And after some troubleshooting I found that the LMS is not creating the CMF database and the other databases. Attached is the installation log file, if someone could help me with it would be appreciated. Please note the following:
1. I have downloaded the installation file from Cisco website twice, so I do not think it is the file that is corrupted, also it is only evaluation license.
2. I have met all the prerequisites and requirement as in the documentation guides, but maybe there is something still wrong.
Thanks,Also Here is more info output:
C:\Program Files (x86)\CSCOpx>pdshow -brief
Process State Pid
Tomcat Program started - No mgt msgs received 1572
TomcatMonitor Running normally 2236
Apache Program started - No mgt msgs received 2436
DataPurge Administrator has shut down this server 0
DCRServer Failed to run 0
CMFOGSServer Administrator has shut down this server 0
EssentialsDM Administrator has shut down this server 0
ConfigMgmtServer Never started 0
ConfigUtilityService Never started 0
CTMJrmServer Administrator has shut down this server 0
ChangeAudit Never started 0
SyslogAnalyzer Program started - No mgt msgs received 2976
ICServer Running normally 5096
EnergyWise Never started 0
PMCOGSServer Administrator has shut down this server 0
IPMOGSServer Administrator has shut down this server 0
IPMProcess Never started 0
TISServer Program started - No mgt msgs received 2544
DFMOGSServer Program started - No mgt msgs received 876
InventoryCollector Running normally 3052
Interactor Program started - No mgt msgs received 5136
InventoryCollector1 Program started - No mgt msgs received 5144
Interactor1 Program started - No mgt msgs received 5308
PTMServer Program started - No mgt msgs received 5320
UPMProcess Never started 0
TISDiscoveryJobCreate Administrator has shut down this server 0
SyslogCollector Running normally 5340
Proxy Program started - No mgt msgs received 5348
PMServer Running normally 5360
NameServer Program started - No mgt msgs received 5680
NameServiceMonitor Running normally 5876
LicenseServer Program started - No mgt msgs received 5884
FHPurgeTask Never started 0
EventFramework Program started - No mgt msgs received 5892
EPMServer Program started - No mgt msgs received 5904
FHServer Administrator has shut down this server 0
NOSServer Program started - No mgt msgs received 5580
diskWatcher Running normally 5640
DFMMultiProcLogger Program started - No mgt msgs received 5864
DFMLogServer Program started - No mgt msgs received 4896
DFMCTMStartup Administrator has shut down this server 0
DfmBroker Running normally 6104
DfmServer Running normally 6416
DfmServer1 Running normally 6424
DCRDevicePoll Never started 0
CSRegistryServer Running normally 6432
CSDiscovery Never started 0
AdapterServer1 Program started - No mgt msgs received 6440
AdapterServer Program started - No mgt msgs received 6448
C:\Program Files (x86)\CSCOpx>pdshow DCRServer
Process= DCRServer
State = Failed to run
Pid = 0
RC = -3
Signo = 1073741821
Start = N/A
Stop = 07/02/2012 17:39:06
Core = Not applicable
Info = Application failed or was registered incorrectly.
C:\Program Files (x86)\CSCOpx>net stop crmdmgtd
The Cisco Prime Daemon Manager service is stopping..........................................
The Cisco Prime Daemon Manager service was stopped successfully.
C:\Program Files (x86)\CSCOpx>bin\perl.exe objects\db\conf\configureDb.pl action=validate dsn=cmf
INFO: C:\PROGRA~2\CSCOpx/objects/db/conf/ConfigureDB.LOCK locked for the operation...
ERROR: [StandardDbUpgrade] : Database cmf is not installed.
INFO: C:\PROGRA~2\CSCOpx/objects/db/conf/ConfigureDB.LOCK released for the future operations...
C:\Program Files (x86)\CSCOpx>bin\perl.exe bin\dbpasswd.pl all
ERROR: There is no database available to change password.
C:\Program Files (x86)\CSCOpx>bin\perl.exe bin\dbRestoreOrig.pl dsn=cmf dmprefix=Cmf npwd=pwd
'cmf' is not a valid data source for the product. -
OBI11g installation on Windows Server 2008 R2 (64bit)
Hi,
Sorry to pick up this topic again, but my research in the forum and other inet sites doesn't help me so far and my installation will not work.
My Situation:
I have a Windows Server 2008 R2 (64bit) default installlation. The server (HyperV-managed) has 4 GB RAM.
I added a Loopback adaptor and set for the loopbackadapter a fixed IP (10.10.10.10 Subnet: 255.255.255.0).
Entered in the host file (127.0.0.1 localhost and 10.10.10.10 servername)
Installed JDK 64bit
Installed Oracle Client 32bit
Then I tried all three options:
1) Default OBIEE Installation --> start of coreapplication_obips1 has failed. Everything else was fine. I was not able to start the obips1 manually
2) Enterprise Installation --> start of coreapplication_obips1 has failed. Everything else was fine. I was not able to start the obips1 manually
3) Manually installed WebLogic 1033 --> SoftwareOnly installation of OBIEE --> manually start config of OBI Installation --> same result as above!
Perhaps you have some hints for me.
Cheers
WolfgangNot in the slightest - I installed five just the other week
All our virtual machines, running 2008 R2 x64. We went for Enterprise Edition, but I believe in CF9 they're both 64-bit anyway. These are the from the build notes I built up:
Install extra roles:
Application Server
Web Server (IIS)
Application Development
IIS6 METABASE Compatibility
Install extra Features:
SMTP Service
Other than that nothing else needs doing. It's worth noting (as a slight but irritating aside) that in 2008 R2 the SMTP service is set to Manual not Automatic, so you'll want to change that unless you want your emails to stop every time you reboot the box.
But the actual install itself was far simpler than CF8 on 2008.
O. -
Hello
I am trying to install Exchange Server 2010 beta 1 onto a Windows Server 2008 R2 (build 7000) machine which has also been set up as a domain controller.
However when attempting to install the Client Access role, setup fails with the error below.
Does anyone know of a way to get around this please?
I have already searched for this error and not found any similar threads.
Also every time I press the code button on this forum it crashes the browser and I keep losing the message! (IE8 from within Server R2). Also the message box is very small, will not expand and keeps jumping to the top.
Thanks
Robin
[code]
Summary: 4 item(s). 1 succeeded, 1 failed.
Elapsed time: 00:00:01
Preparing Setup
Completed
Elapsed Time: 00:00:00
Client Access Role
Failed
Error:
The execution of: "$error.Clear(); Install-ExchangeCertificate -services "IIS, POP, IMAP" -DomainController $RoleDomainController", generated the following error: "Could not grant Network Service access to the certificate with thumbprint 2F320F5D5B5C6873E54C8AB57F604D8AFA31D18C because a cryptographic exception was thrown.".
Could not grant Network Service access to the certificate with thumbprint 2F320F5D5B5C6873E54C8AB57F604D8AFA31D18C because a cryptographic exception was thrown.
Access is denied.
Elapsed Time: 00:00:01
Mailbox Role
Cancelled
Finalizing Setup
Cancelled
[/code]
Robin WilsonHello
Thanks for all the replies.
I have since wiped the system and installed everything again and it all worked this time so not sure what was wrong last time. I did try to uninstall all Exchange components and then uninstall IIS and Application server, reboot and re-install but I received the same error still when it came to installing the client access role.
Walter: I just attempted the standard installation which should have used the default self-signed certificate. Everything was a fresh install done at the same time on a freshly formatted PC.
For info last time when it failed to work:
- Installed Windows Server 2008 R2
- Installed Domain Controller role using dcpromo. I set the forest and domain as Windows Server 2008 R2
- Added a forest trust between main domain and test Exchange domain (set up as ex2010.local)
- Installed IIS and Application Server role
- Installed Hyper-v role
- Installed Desktop Experience feature
- Installed Exchange and recieved the error
When it worked I set up the forest and domain in Windows Server 2008 mode (i.e. not R2), installed Exchange first and then set up the forest trust and then Hyper-v. It did say it failed to configure dns which was probably because it started trying to do automatic updates half way through the dcpromo! DNS seems to work ok though.
I did notice this time that Hyper-v gave a warning about the virtual network adapter not being set up correctly and the local network did not work correctly although I could access the internet. Not sure if this could have been related to the cause of the problem previously. For now I have disabled the virtual network until I get time to try and get it working and so the mail will work in the meantime.
I also noticed that Hyper-v added an extra 443 ssl binding to the default website so as it had 2 bindings on port 443 it refused to start. After deleting one it worked.
I decided to install Exchange onto a domain controller as it is only a test and I wouldn't do it in a live environment. I am also short of test machines! It didn't give me any warnings about this actually, I think previous versions warn you that it is not recommended.
Andreas and Chinthaka: I did not know about the requirement to run the domain at 2003 mode. The main domain is running in 2008 mode with Exchange 2007 so I assume this is just a temporary beta related requirement. It does seem to be working (second attempt) so far in a 2008 mode domain although I haven't had a chance to fully test it yet.
Thanks
Robin
P.S. Sorry it's taken me a while to reply!
Robin Wilson -
Installation Server Slow on Windows Server 2008 R2
Previously I had two identical servers setup to service SAPGui installs in our corporate office. Both were configured for SAPGui 7.20 Patch 3 and the servers were Windows Server 2003 SP2.
Recently one of these servers was replaced with a newer/faster with more memory Windows Server 2008 R2 box.
I immediately noticed installs to front ends were taking longer when run off the 2008 system. Today I timed installs to two identical front end Win XP computers.
Server 2003 SP2 installed in 7 minutes.
Server 2008 R2 installed in 23 minutes.
Has anyone else experienced this?
Bob HI have no doubt that the problem in the OS localization.
But, taking into account some facts:
World population is estimated to number 7.126 billion people.
Anglosphere is about 740 million people.
I have not found information about the supported OS languages.
I'm worried about losing my non-English data.
I am for the licensed software, but a trial and registered OS has the same functionality, and displays messages/data in the same way.
I doubt that the OS registration will allow installer to properly finish and even display the error correctly. (Java strings is UTF-based, so, developers should set correct code page. Probably, because system code page can be different with console code page (cp866 for Russian). Current codepage could be view by executing "chcp" in console).
In any case Enterprise-class product should operate correctly on each supported systems, or inform about problems before. -
Oracle 11gR2 installation problem on Windows Server 2008 R2 datacenter
Hi
I am trying to install Oracle 11Gr2 64 bit on Windows server 2008 R2.The system configuration is "Intel Xeon, RAM 8.00 GB.
i
The installation is getting paused at the 8th step of Oracle installation.Neither i am getting any error message nor an entry is recorded in the Oracle inventory log.
It is showing a blank screen after the prerequiste checks are complete.
Request you to help me out in resolving the issue.
Thanks in advance for your cooperation.Hi Helios
Thanks for the response. The database is still not created to check in the Alert log .It is still in the phase of pre-requisite checks. I did not go with Silent installation.It is a plain single instance installation.
The installation screen is greyed out with out any message or error.
Please could you share if you have any thoughts on this. -
Error while performing SAP Installation in HA Env on Windows Server 2008
Hello,
I am performing a SAP Installation in HA Environment on Windows Server 2008. I am at the ASCS installation step.
As per the guide before installing ASCS there are some activities to be carried out on Failover Cluster Management.
I have done all the steps except one as per the guide. I am stuck in the Add FileServer Step. In this step the guide says to go to the Dependencies tab and add the cluster disk resource to the dependencies list. It also says to add the Name:Virtual NetworkName to the dependencies list.
Now in my scenario I have 3 shared drives for SAP and I have added each of them in the dependencies list of the new FileServer. The only problem is how do I add the Name:Virtual NetworkName to this list
When I continue without giving the Network name the system issues a warning "This resource requires dependencies on instances of the following resource types or classes:Network Name. Not adding these dependencies will prevent the resource from working properly. Do you want to save the current settings anyway"
If I click on Yes and bring this resource online it fails with this error message
"The action Bring this resource online did not complete.An error occured while attempting to bring the resource 'SAPECC FileServer online'. The cluster resource could not be brought online by resource monitor."
My question is how to add the Name:VirtualNetworkName to the dependencies list of the FileServer.
Regards
Mitesh NairHi,
I have resolved the issue with the help of cluster admin
Regards
Mitesh -
Windows Server 2008 R2 Service Pack 1 installation failed with error code 0x800f0a12
Hello,
I'm facing problem to install windows server 2008 R2 SP1. I cannot install SP1. In this server have running Exchange 2010 server. to update Win2008 R2 SP1 facing the following error:
1. Service Pack installation failed with error code 0x800f0a12.
2. Installation Failure: Windows failed to install the following update with error 0x80070643: Windows Server 2008 R2 Service Pack 1 for x64-based Systems (KB976932).
Please suggestPlease run the system update readiness tool.
http://windows.microsoft.com/en-us/windows7/What-is-the-System-Update-Readiness-Tool?SignedIn=1
Then post the complete contents of;
%SYSTEMROOT%\Logs\CBS\CheckSUR.log
Regards, Dave Patrick ....
Microsoft Certified Professional
Microsoft MVP [Windows]
Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights. -
Installing Weblogic 12c on windows server 2008
Trouble installing Weblogic 12 on windows server 2008 ,i have oracle 11g databse in the same system.Now i am trying to install Oracle Weblogic 12 ,but WLS requires JDK 1.6 as a minimum ,after i install the Oracle11g database it automatically installed the Jdk 1.5 ..now how can i go about and install Weblogic 12 .
install JDK 6 or 7. Load the environment variables from CMD.EXE
set JAVA_HOME = RUTA_DEL_JDK_6_OR_7
set PATH =%JAVA_HOME%\BIN;% PATH%
Then, from the same terminal (cmd.exe) run the weblogic runInstaller.exe 12c.
Maybe you are looking for
-
Windows NT does not boot after installing NI-CAN 1.6.0 or security update
We are running Windows NT 4.0 SP 6 english with MS IE 5.5. On one machine we had NI-CAN 1.6.0 installed. After installing the security update from Microsoft over the web the machine did not boot. On another machine the security update was installed.
-
Enq: TX - row lock contention wait event
Hi, I would like to find which DML query has not given COMMIT or ROLLBACK after the execution. Because one of the development database have more table locks and developer reported that their session was hanging. I referred AWR report also and more ti
-
Olympus E-M1 files and Lr 5.3rc
Good to see the very bright reds have gone with Olympus E-M1 files but now there is a new problem. Skin tones (caucasian) are dreadful. Everyone looks jaundiced. Not good... not good at all. If anything this is a step backwards from where it was befo
-
TES v6.1 Job.Insert using name or alias
hello, The following XML work fine when I use job id 166. I tested it on http://localhost:8080/api/tes-6.0/postscreen . <?xml version="1.0" encoding="UTF-8"?> <entry xmlns="http://purl.org/atom/ns#"> <id>12</id> <tes:Job.insert xmlns:tes="http://www.
-
7200 RPM Vibbbrrraaatttiioooon...
I went through all the trouble of getting my EFI firmware rolled backed to 1.6 for my Momentus 7200.4 500GB drive (had the computer at Apple store for like 8 hours). However, the unibody vibrates so much, I can even feel it on the keys. It's like my