Installation 64-bit client software and ODAC on windows 2008 r2

Welcome,
I new on Oracle. I need to create a linked server from sql 2008 r2.
Where i can find latest (current) 64 bit 11g r2 client and odac ?
Is it
https://updates.oracle.com/ARULink/PatchSearch/process_form?bug=10404530 Oracle 11.2.0.3.0
+ Patch 14828076: ORACLE 11G 11.2.0.3 PATCH 13 BUG FOR WINDOWS (64-BIT AMD64 AND INTEL EM64)
and
ODAC http://www.oracle.com/technetwork/database/windows/downloads/index-090165.html
http://download.oracle.com/otn/other/ole-oo4o/ODAC1120320_x64.zip

Hi;
Please review:
FAQ Installing the Oracle Client and ODAC Components on Windows [ID 1319067.1]
Where to Find The 11gR1 64-bit Oracle Data Access Components (ODAC)? [ID 865708.1] <<check section 2 part
Regard
Helios

Similar Messages

Unable to do BPC for Office Installation via BPC Client software

Hi,
I am trying to install "BPC for Office Installation" via the client software center. I get an error "You do not have authority to install the BPC for Office.".
I am on Windows 7 Home premium. My username is the only name on the computer and has admin rights.
I did browse through a few threads in this forum and as per the suggestions, I installed .NET 1.1 and service pack for it.
I also modified the "hosts" file in system32\drivers\etc to include the lines I need.
IT STILL DOESNT WORK !
PLEASE HELP!
Regards,
Tagz

Thanks for your response Patrick!
I enable the Intranet option as per the note and added the website to my zone in the browser security option.
I get case 2 error as per the note. I tried going to the next step. Now it says "Not enough memory. A minimum of 64 MB of memory is required.". My computer though has 4GB memory.
Please advice!
Thanks,
Tagz

Error: SAP installation of ERP Sr3 with ORACLE 10g on Windows 2008 server

Dear all,
while installaing SAP ERP SR3 with ORACLE 10g on windows 2008 server...
we are getting error as not support.
please confirm wether this version of OS is uspported or not.
thanking you in all,
by
Animesh

actualy we tried to change Oraparam.ini file in the installation folder...
edited ... windows= 5.0, 5.1, 6.0
we had entered 6.0
Yes - that is necessary.
and started ... but after starting we are getting ERROR like unKNOWN and installation popup (OUI popup) exiting with .. error popup.
Yes - because Oracle delivers its own Java version - which is too old to run on Windows 2008.
if you suggest us to use 2003 64 bit for temporaray .... purpose.
and is there any specified procedure to UPgrade OS.
like... DB should be updated before OS upgradation.
You can run 10.2.0.4 on Windows 2003 x64 nicely and upgrade to Windows 2008. Since there is no "upgrade" (it is the highest version supported) there´s no need to do anything.
The question you have to ask is:
Why do you need Windows 2008? Is there any technical implication?
Markus

Solaris nis client can't connect to Windows 2008 NIS Server across subnets

I have been using Microsoft Windows Server for NIS for years to centralize some accounts accessing Solaris and Linux OS.
Windows 2003 R2 Indentity Management for UNIX version of Server for NIS was last working version with Solairs.
After upgrading Domain to Windows 2008 all Solaris clients that are on different subnets fail to bind and connect to NIS servers now.
These servers already were setup using ypinit -c to manually add the NIS servers to connect to and prior to Windows 2008 this worked.
Now no Solaris nis clients on different subnets (no firewall between) can connect , but other Unix/Linux OS connect fine.
Is this a known issue and can we get a resolution as it seems only Solaris is affected?

Hi Mid.Hudson-IT,
Before we begin ,we should ensure we have configured the printer server correctly .
Here is a link for reference of configuring the printer server .
Print server role: Configuring a print server
https://technet.microsoft.com/en-us/library/cc775791(v=ws.10).aspx
"I can map all of the printers on the network to the print server as-well as install the drivers correctly and I can resolve the IP and server name via DNS"
From this sentence ,I can`t figure out whether you have tried to ping the server both with the IP adress and name adress from the client ?
If we can ping the print server from the client,we can ensure the connection to the printer server is good .
Then we can try to install the printer driver directly to have a check .In the adress bar of Windows Explorer ,input "\\server name \the printer name"
If we cannot ping the print server ,we should troubleshoot the network issue firstly.
We also can check the event viewer for more information to troubleshoot this issue .
Best regards

Windows 8 installation of VPN Client Software (x86 64-bit version) results in "Icon09DB8A851.exe" on startup task

I've just installed a VPN Client Software for x86 64-bit version of Vista and Windows 7 (vpnclient-winx64-msi-5.0.07.0440-k9.exe) to Windows 8. It's working without problem except that it seems to add an entry "c:\Windows\Installer\{5FDC06BF-3D3D-4367-8FFB-4FAFCB61972D}\Icon09DB8A851.exe" onto startup task. I suspect the installer program (InstallShield) is not working properly. I'd like to know if anyone has same issue or my computer got infected in malware.

Hi I have installed and config to my client a ASA 5515 and everything is fine but. When I config L2TP/IPSEC VPN for the remote work bang I have a problem. When I config L2TP/IPSEC VPN to Windows 7 with native client on Windows everything is fine, but in Windows 8.1 is bad on 1 hour after VPN connection Windows 8.1 tries to renegotiate the connection and something happens and the connection is disconnected.
LOG:
5
Feb 14   2014
14:53:07
713049
Group =   DefaultRAGroup, IP = XXX.XXX.XXX.XXX, Security negotiation complete   for User () Responder, Inbound SPI = 0x869df107, Outbound SPI = 0xfb02e574
4
Feb 14   2014
16:41:08
113019
Group =   DefaultRAGroup, Username = s.choraliev, IP = XXX.XXX.XXX.XXX, Session disconnected. Session   Type: L2TPOverIPsecOverNatT, Duration: 1h:48m:01s, Bytes xmt: 29765217, Bytes   rcv: 9633270, Reason: L2TP initiated
5
Feb 14   2014
16:41:09
713119
Group =   DefaultRAGroup, IP = XXX.XXX.XXX.XXX, PHASE 1 COMPLETED
6
Feb 14   2014
16:41:09
602303
IPSEC: An   outbound remote access SA (SPI= 0x805CA50C) between XXX.XXX.XXX.XXX and XXX.XXX.XXX.XXX (user= DefaultRAGroup) has been   created.
5
Feb 14   2014
16:41:09
713049
Group =   DefaultRAGroup, IP = XXX.XXX.XXX.XXX, Security negotiation complete   for User () Responder, Inbound SPI = 0x9a7f5ac6, Outbound SPI = 0x805ca50c
5
Feb 14   2014
16:41:09
713120
Group =   DefaultRAGroup, IP = XXX.XXX.XXX.XXX, PHASE 2 COMPLETED   (msgid=00000001)
And the VPN session is stack.

32 bit Oracle Software and OS on a 64 bit server.

Does anyone know what would happen or has run into a case where a client site has installed Windows 2003 server 32 bit and Oracle for Windows 32 bit on a Dell 64 bit Windows server?
Here's what we are seeing. Oracle is unable to go past the the 2G limit, but we added the /3G switch and got above 2G but below 3G. On the windows task manager, windows is not even tasking the hardware and memory. In Oracle, it's showing an issue with virtual memory in the EM with a 100% impact. "consider addin more physical memory to host". Also in the EM, when you click on the host name link off the home page, you get a page filled with errors. It's like it not able to pull information from the system. The database is up and functioning, but it's not running well. Due to the fact that this is a production box, it's not likely that in any time will we have them start over and rebuild the box. Any ideas as to what can be done or looked at to help? Does these issues sound indicative of the hardware and software combination the've got.
Thanks,
Mike

How do you get the 32bit client to communicate with the 64bit Oracle instance on the same windows box? After installing the 64 bit db and client (on a developer desktop), I installed the 32 bit client to a different oracle home. I could not get it to connect to the listener - what am I doing wrong? Should I reinstall it to the 64bit home - I'm afraid that'll kill everything though.
Also, I think I'm correct in this, but not sure: any 32bit app must use the 32bit client on the 64bit box. MS Access needs 32bit ODBC, which needs 32bit client, etc.
Thx,
Jeff

Can't install odac on Windows 2008 64 bit

After i run setup.exe, i get an error c0000374 in javaw.exe. Tell me please if odac officially supported on windows 2008 64-bit ?

Oh, and for those looking for the Win2k8 bundle , it's available now too, and should have the odac pieces built in.
http://www.oracle.com/technology/software/products/database/oracle11g/111070_win32_2008soft.html
http://www.oracle.com/technology/software/products/database/oracle11g/111070_win64_2008soft.html
Note that it wont have the Oracle Developer Tools though, as those are 32 bit since VS is 32 bit.
Greg

Issues installing 10g ODAC on Windows 2008 with Oracle 10g Express

I am new to Oracle and am having an issue installing Oracle Data Access Components on Oracle 10g 64bit running on Windows 2008 64bit.
I need the ODAC installed to enable integration with SSIS.
The issue I have if i install using ODAC10203x64 the setup file fails with a javaw error and the ntdll.dll.
I then downloaded the ODAC1110720 which states it backwards compatible. It installs just fine, but now i am not sure as to how to configure it correctly as the Configuration util that loads in ODAC10203x64 does not run.
The ODBC drivers are not visible under the ODBC connection manager although this may be an issue of just opening the 32Bit version.
Any help would be appreciated

Hi Ibrahim,
You should decide what you require.
32bit version can be installed on 64bit server and this should work fine (check the certification matrix for this).
The "problem" is that you would not gain any performance benefit from the 64bit server
If you want to have benefit you can upgrade the JVM to 64 bit version.
I did this 3 years ago and I do not remember exact steps though everything worked OK.
WARNING:
this can be unsupported, ask support to be sure
- Install the 32 bit version on the server
- Download 64 bit Java JRE/JDK and install it (well, you can search the same release as included in the AppServer or try newer one, 7 for example)
- later, reconfigure the appserver so it uses the version you've installed, OR Copy the everything from c:\progfiles\java\... to the directory OraHome\... (forgot exact directories)
try to search the forum, there had been a thread with the same question
regards, michael
Edited by: MickleSh on Sep 27, 2011 9:59 AM

DRM Web Client 500.19 issue on windows 2008(x64)

Hi guys,
I installed DRM version 11.1.2 on windows server 2008(x64), according to the documents, I pre-installed .Net 3.5.1 and modified the applicationHost.conf file. The installation is successful without error. However when I access the web client I got the 500.19 error, can't find C:\inetpub\wwwroot\drm-web-client\web.config, the web.config file do not exist.
I guess this is something about IIS configuration but I'm not familiar with IIS, can anybody give me some suggestion?
Thanks

I found this in epm_install_troubleshooting
Web Client Access Failure
Issue: After installing Data Relationship Management on Windows 2008 64-bit platform, you
get this error message when attempting to access the Web client:
HTTP Error 500.19 - Internal Server Error The requested page cannot be
accessed because the related configuration data for the page is invalid.
Solution: In the IIS configuration file (C:/Windows/System32/inetsrv/config/
applicationHost.config), replace the two occurrences of Deny in the following section with
Allow:
<configuration>
<configSections>
<sectionGroup name="system.webServer">
<section name="handlers" overrideModeDefault="Deny" />
<name="modules" allowDefinition="MachineToApplication"
overrideModeDefault="Deny" />

DRM Web Client 500.19 issue on windows 2008(x64) ERROR

Hi,
I installed DRM version 11.1.2 on windows server 2008(x64), according to the documents, I pre-installed .Net 3.5.1 and modified the applicationHost.conf file.
I found this in epm_install_troubleshooting
Web Client Access Failure
Issue: After installing Data Relationship Management on Windows 2008 64-bit platform, you
get this error message when attempting to access the Web client:
HTTP Error 500.19 - Internal Server Error The requested page cannot be
accessed because the related configuration data for the page is invalid.
Solution: In the IIS configuration file (C:/Windows/System32/inetsrv/config/
applicationHost.config), replace the two occurrences of Deny in the following section with
Allow:
<configuration>
<configSections>
<sectionGroup name="system.webServer">
<section name="handlers" overrideModeDefault="Deny" />
<name="modules" allowDefinition="MachineToApplication"
overrideModeDefault="Deny" />
However when I access the web client I got the 500.19 error, can't find C:\inetpub\wwwroot\drm-web-client\web.config, the web.config file do not exist.
Config File \\?\C:\inetpub\wwwroot\drm-web-client\web.config

Might be too late, but the problem is that IIS is pointing to the incorrect path. Should not be pointing to C:\Inetpub\wwwrooot\.... it should be pointing to Oracle\Middleware\EPMSystem11R1\products\DataRelationshipManagement\client\web-client same thing with the migration-client IIS app. To fix use the IIS Manager click the drm-web-client virtual directory and select "Advanced Settings" and update the "Physical Path" property.
Pablo

Is Oracle client 10g or 11g for Windows 2008 R2 (6.1) available yet?

I have not been able to locate this. If this has not been released, does anyone know when? I have tried the Windows 2008 64 bit 11gR1 (11.1.0.7.0) client on a Windows 2008 R2 with no success. Thanks.

user12871152 wrote:
Is there any update on the release date of the Windows 2008 R2 Oracle client? Rumor has it we might see it March 2010. Can someone confirm or deny?I can confirm that there is such a rumor.
I can also confirm that a Support note 742060.1 "Release Schedule of Current Database Releases" provides further information.

Problem with update SCCM client to Sp1 CU3 on Windows 2008 server

Hi all,
I have problem with update SCCM client on Windows 2008 Server to 2012 Sp1 CU3. I have sent to deployment package with update (SP1 Cumulative Update 3 - server update) on four servers and after few minutes I have got in Monitoring\Deployment details four
this same errors in "Asset Details":
USER Message ID
Status type Description
NT\AUTHORITY\SYSTEM 1006
Error 3003
I love that types of error... which is har to find answer on google :-( I have tried but I haven't find any constructive :-( Did you met with something similar? Which log I should check (sorry - I'm still noob in SCCM2012) to update actual SCCM Client SP1
(5.00.7804.1000) to SP1 CU3 (5.00.7804.1400)?
Thank you.

I see in fodler with CU3 updates, are four packages:
- SP1 Cumulative update 3 - x64 client update
- SP1 Cumulative update 3 - x86 client update
- SP1 Cumulative update 3 - server update
- SP1 Cumulative update 3 - console update
It will be stupid but... maybe I should deploy x64 client update package?

I am trying to use itunes, it will not open at all, have uninstalled and downloaded new software and 64bit for windows. i have an old ipod nano from about 5 years ago. anything i can do, even to view my purchases and watch/listen to music etc?

ok i have a advent roma laptop with window 7. my itunes used to work fine, completely. every time i plugged in my ipod it was ok. recently my ipod was not working so i never bothered with itunes, however i have movies/tv prog that i purchased and would like to view them. i have an ipod nano from about 5 years ago, the problem with thet is, it switches on, but the circular control panel does nothing, all you can do is lock and unlock it - nothing else.
i tried to download new version of itunes, then uninstalled my origonal version, incase it was corrupted etc, i then again tried to down load new version and also version that is windows 64bit. still when i select the downlaod to open as son as it is finnished nothing happens. and now my desktop shortcut has dissapeared. before when it was there, id double click it, nothing, right click to open it, nothing.
im not the best technically minded but i just dont see what im doing wrong here, please help

Perhaps it would be helpful for you to view the page source code of this page
http://www.alanwork.com/
As you can see, the submenu code links are immediately below the top level code, and are
wrapped in their own <UL> </UL> tag pairs.
Hope that helps

Backup and Restore for windows 2008 r2 and windows 2012r2

hi
I have a question.. see I have a windows server 2008r2(roles are active directory, dns ,files sharing, enforced gpo etc) and I have this backup on a external hdd as bare metal... so my question is .. is there a way I can get the external hdd connected it
to my new Lenovo server running windows server 2012 r2 and restore everything? will it copy the 2008r2 at 100 percent?
in other words have everything from my 2008r2 server on my new 2012r2 server
any help will be appreciated
thanks in advance

Hi,
We could not restore the server 2008 r2 backup on server 2012 r2. System State Recovery is only supported on the same operating system instance. It is not supported on a reinstalled operating system on the same or different hardware.
For more detailed information, please refer to the article below:
How to restore a Windows installation or move it to different hardware
http://support.microsoft.com/kb/249694/en-us#method3
Regards,
Mandy
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Source path too long :-Unable to delete mutiple number of folder and files from windows 2008 R2 file server

Hi Team,
we have a file server on windows server 2008 R2, I have copied some data from one server to another server using robocopy . I have checked access permission it seems okay no issues with access permission. but when i am trying to delete these folder i am
getting below error message
Error message:-
The source file name are larger than is supported by the file system.try moving to a location which has a shorter path name or try renaming to shortcut names before attempting this operations
Regards,
Triyambak
Regards, Triyambak

I have tried everything , but nothing help , getting same error
could any one help me regarding this.
Regards, Triyambak
I have not looked at the other thread mentioned, but usually when this ends up happening, There are several ways to go about it. One is to map a drive to the UNC path deeper into the folder structure.
So instead of C:\long\path\that\we\dont\want\files\in
You map a drive.. lets say M:\ to \\computer\c$\long\path\that\we\dont\want
Now, when you open Explorer to M:\ you've elimintated the length of the path down to M:\files\in which is completely usable.
The other way, is to shorten the names of everything. For example...
Folder structure like this:
Root
-----Folder1
-----Folder2
--------------Folder2A
-----Folder3
--------------Folder3A
Rename all the folders to shorten up the path. Rename Folder1 to '1' Rename Folder2 to '2', Rename folder3 to '3. Then try to delete. If it's still too long, go one folder deeper. Rename Folder2A to '1' and
Rename Folder3A to '1' and so on. Basically keep renaming everything to a single digit character and eventually you'll shrink the path down to where you can shift-delete everything remaining.
Hope that helps.
Brian / ChevyNovaLN

Installation 64-bit client software and ODAC on windows 2008 r2

Similar Messages

Maybe you are looking for