Installation 9.2.0.4 on SLES 10.2

I am trying to install 9iR2 on SLES 10 SP2 with no success :-(
According to SLES_9_to_SLES_10_Oracle_Development
linuxthread support is removed in SLES10 i.e. only NPTL support causes Oracle 9iR2 and older products not to work with SLES10
I used to have a working SLES 10 (with no SP) with 9.2 running, but it seems LD_ASSUME_KERNEL is now unusable in SLES10SP2
SLES 10 SP2 RELEASE NOTES
LD_ASSUME_KERNEL Environment Variable
Do not set the LD_ASSUME_KERNEL environment variable any longer. In the past, it was possible to use it to enforce LinuxThreads support, which was dropped. If you set LD_ASSUME_KERNEL to a kernel version lower than 2.6.5, everything breaks because ld.so looks for libraries in a version that does not exist anymore.
$ date
Sun Jul 27 14:39:44 CEST 2008
$ export LD_ASSUME_KERNEL=2.4.21
$ date
date: error while loading shared libraries: librt.so.1: cannot open shared object file: No such file or directoryAny hint? the installation just hangs on naeet.o.
Thanks
Laurent
Message was edited by:
Laurent.Schneider

Hi Dan,
Thanks for your answer.
I have 10.1.0.5, 10.2.0.4 and 11.1.0.6 running.
9.2.0.8 is in extended support until July 2010 ( http://www.oracle.com/support/library/brochure/lifetime-support-technology.pdf ) so it is perfectly legitimate to install and maintain it.
My upcoming book covers those four releases, I wish I could find a hack to get this 9i running...
SLES is a supported platform. However the issue seems to be related to LinuxThreads. Note that I may face similar issue with the latest EL5 (which does not explicitly support 9i).
Well, I want to have all versions running on the same OS. I prefer "wasting my time" here asking for help rather than switching to RedHat.
YMMV
Thanks
Laurent
PS: about reading the doc: upgrading the operating system by applying a service patch that is newer than the doc will not help too much ... even 11g shows only 10.0 in the installation guide !!! (and of course applying SP2 will not break your Oracle Installation) There is at most a time delay between the release of the os vendor service packaging and the update of certification notes

Similar Messages

Installation of ECC6.0 EHP5 on SLES-11-SP1 ABAP+JAVA

Dear Gurus,
I want to install ECC6.0 EHP5 on suse linux 11 i.e SLES-11-SP1 and my database will be DB2.
i want to install ABAP+JAVA.that means i have to install ABAP Instance first after then i have to add JAVA Instance into it.
Am i Correct?
Can anyone help me out regarding the same.
Thanks & Regards
Ajitabh

Hi,
That means i have to install ABAP Instance first after then i have to add JAVA Instance into it.because Java instance is must as per our requirement.
Kindly suggest.
Thanks & Regards
Ajitabh

Oracle Patch 10.2.0.4 Error - Installation Solman 7.0 EPH1 on SLES 11

Hi experts,
When i'm doing the oracle patch from 10.2.0.1 to 10.2.0.4 im getting the following error:
"Error in invoking target 'agent' of makefile '/oracle/<SID>/102_64/sysman/lib/ins_sysman.mk'. See '/oracle/oraInventory/logs/installActions2010-09-10_11-32-07AM.log' for details.
Exception Severity: 1"
I can complete the patch installation but DB is not starting in phase (13/48 Create database) im getting the following error:
An error occurred while processing option SAP Solution Manager 7.0 EhP1 > SAP Systems > Oracle > Central System > Central System( Last error reported by the step :SQL statement or script failed. DIAGNOSIS: Error message: Executable /oracle/SMP/102_64/bin/sqlplus returns 1.. SOLUTION: For more information, see ora_sql_results.log
This is the log:
================================================================================
2010-09-10, 12:22:12 SAPINST ORACLE start logging for
SHUTDOWN IMMEDIATE;
exit;
Output of SQL executing program:
SQL*Plus: Release 10.2.0.4.0 - Production on Fri Sep 10 12:22:12 2010
Copyright (c) 1982, 2007, Oracle. All Rights Reserved.
ERROR:
ORA-12547: TNS:lost contact
SP2-0751: Unable to connect to Oracle. Exiting SQL*Plus
SAPINST: End of output of SQL executing program /oracle/SMP/102_64/bin/sqlplus.
SAPINST found errors.
SAPINST The current process environment may be found in sapinst_ora_environment.log.
2010-09-10, 12:22:12 SAPINST ORACLE stop logging
"================================================================================"
2010-09-10, 12:22:12 SAPINST ORACLE start logging for
STARTUP NOMOUNT;
exit;
Output of SQL executing program:
SQL*Plus: Release 10.2.0.4.0 - Production on Fri Sep 10 12:22:12 2010
Copyright (c) 1982, 2007, Oracle. All Rights Reserved.
ERROR:
ORA-12547: TNS:lost contact
SP2-0751: Unable to connect to Oracle. Exiting SQL*Plus
SAPINST: End of output of SQL executing program /oracle/SMP/102_64/bin/sqlplus.
SAPINST found errors.
SAPINST The current process environment may be found in sapinst_ora_environment.log.
2010-09-10, 12:22:12 SAPINST ORACLE stop logging"
"================================================================================"
My SAP version: Solution Manager 7.0 EPH1 - DB-10.2g and O.S-SuSE linux 11
Please help me Thanks in advance...
Gina

Hello Gina,
it seems like you have not installed all the needed RPM packages - to be absolutely sure we would need the installActions log file itself.
Check metalinknote #317627.1 for further information about the RPMs.
Regards
Stefan

AccAD 2.1 on SLES 10 SP3: Installation issue with compat-libstdc++

Hi everybody,
if someone likes to try the installation of AccAD 2.1 on SLES 10 SP3 (i386 or x86_64), be aware of the following:
After installing the OS with the delivered autoinst.xml, not all libraries needed by AccAD are installed.
If you try to install the AccAD Engine, you will get a message that the following package is missing:
compat-libstdc++
If you ignore this message, after the installation of AccAD it will not work. Especially MaxDB needs this package. You can see this in the installation protokoll that some MaxDB installation steps fail.
Since SLES 10 SP3 this package "compat-libstdc++" is moved to the software packge
libstdc+33 / libstdc+33-32bit
For example on the original SLES 10 SP3 installation DVD, these are the packages
libstdc+33-3.3.3-7.8.1 / libstdc+33-32bit-3.3.3-7.8.1
Install these packages before the installation of AccAD an then install AccAD. Now you can ignore the message of the missing rpm-package "compat-libstdc++".
Regards, Rossi
Edited by: Stephan Roßmanith on Feb 18, 2010 9:49 AM

Hi Stephan,
Thank you very much for your notes.
This issue has already been fixed in AccAD 2.2.
Best regards,
Yael

Ver1.6: htmldb_admin delivers ORA-06502

Hi all,
after installing ver 1.6 we have some problems with logon to htmldb:
Installation :
Machine 1: Linux-x86 ( Non SLES ) ORACLE 9.2.0.6 contains "mydb". There are different Workspaces for htmldb Applications.
Machine 2: Linux-x86 ( SLES-8) CompanionDisk htmldb1.5 upgraded to 1.6 connected to "mydb".
Additionally after upgrade I ran the lang_de.sql Language Pack.
I received the htmldb_admin Page, but Logon from a Client with Browser(lang: de) failed mostly.
Today I was able to open htmldb_admin with the browser of machine 2. That ones lang was set to "en-us". It worked.
In Fact that it's not a good choice for working on an team :-)
Error_log shows :
First atempt from Client1 ("german machine", iexplore 6x) : / pls/htmldb/wwv_flow.accept HTTP-404 ORA-6502: PL/SQL numeric or value Error ORA-06512 at line 10.
Second attempt from Machine2 ( SLES-8, DE) with Mozilla("en"): It Works
Third attempt from Machine2 with Konqueror("de"). Failed as described above.
Even I'm not able to open any of the other Workspaces with the htmldb.
what to do?
Regards Franz

Franz,
Bug 4015165 is listed as an issued "introduced in 9.2.0.6". As well, if you look at Note 295550.1, it describes this problem and how it impacts HTML DB.
The fix is to install the patch from MetaLink, patch number 4015165. It is a patch for 9.2.0.6.
Joel

Grid Control 10.2.0.1 install

I keep running into this this problem with my installation of Grid Control on my SLES 10 box. I've tried reinstalling my entire SLES 10 environment and no luck. It gives warning at
Checking for the Hostname...
Check complete. The overall result of this check is: Failed <<<<
Problem: The host name in /etc/hosts is not proper.
Recommendation: Please verify the hostname in /etc/hosts. The /etc/hosts might either contain short host name or ip address instead of full host name.My /etc/hosts file looks like this
# hosts         This file describes a number of hostname-to-address
#               mappings for the TCP/IP subsystem. It is mostly
#               used at boot time, when no name servers are running.
#               On small systems, this file can be used instead of a
#               "named" name server.
# Syntax:
# IP-Address Full-Qualified-Hostname Short-Hostname
127.0.0.1       localhost
# special IPv6 addresses
::1             localhost ipv6-localhost ipv6-loopback
fe00::0         ipv6-localnet
ff00::0         ipv6-mcastprefix
ff02::1         ipv6-allnodes
ff02::2         ipv6-allrouters
ff02::3         ipv6-allhosts
<my ip>   DLIWSB3AH.MT.GOV DLIWSB3AHI've tried to change
<my ip>   DLIWSB3AH.MT.GOV DLIWSB3AHto just
<my ip>   DLIWSB3AH.MT.GOVwith no luck....
Any Suggestions?
Tom

ping DLIWSB3AH.MT.GOV
PING DLIWSB3AH.MT.GOV (<my ip>) 56(84) bytes of data.
64 bytes from DLIWSB3AH.MT.GOV (<my ip>): icmp_seq=1 ttl=64 time=0.063 ms
64 bytes from DLIWSB3AH.MT.GOV (<my ip>): icmp_seq=2 ttl=64 time=0.059 ms
64 bytes from DLIWSB3AH.MT.GOV (<my ip>): icmp_seq=3 ttl=64 time=0.205 ms
64 bytes from DLIWSB3AH.MT.GOV (<my ip>): icmp_seq=4 ttl=64 time=0.065 ms
64 bytes from DLIWSB3AH.MT.GOV (<my ip>): icmp_seq=5 ttl=64 time=0.035 ms
--- DLIWSB3AH.MT.GOV ping statistics ---
5 packets transmitted, 5 received, 0% packet loss, time 3999ms
rtt min/avg/max/mdev = 0.035/0.085/0.205/0.061 msP.S.
Changing to lowercase eliminated the warning - Now i'm just having other non-related problems further down the road. Thanks for the info!
Tom

Installation 9.2.0.4 hangs with "Copying naeet.o" on AMD64 SLES 10

I'm trying install 9.2.0.4 (from downloaded amd64_db_9204_Disk[123].cpio.gz) on SLES 10 on AMD64 platform
and it hangs on 17% of "Installing Oracle Required Support Files 32-bit" wen "Copying naeet.o"
I'l try apply issues from MetaLink and other forums - no results :(
When I set LD_ASSUME_KERNEL=2.4.21 (like I did on SLES 9) and start ./runInstaller (or other tools: ls, etc.) I'v got error:
...: error while loading shared libraries: librt.so.1: cannot open shared object file: No such file or directory
I so: http://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=FOR&p_id=646767.999 - not my case
can anybody help me?

anilech wrote:
no luck installing 9i (64-bit) on rhel5.2 (64-bit)
installer from 9.2.0.6 dies after selecting "software only" on "Processing Database Configuration Assistant" at 91%.
in log:
Exception java.lang.NoSuchMethodError: oracle.sysman.oii.oiio.oiiod.OiiodDepEngine.getRequiredSpace(Z)[Ljava/util/Vector; occurred..
java.lang.NoSuchMethodError: oracle.sysman.oii.oiio.oiiod.OiiodDepEngine.getRequiredSpace(Z)[Ljava/util/Vector;
     at getRequiredSpace.performQuery(getRequiredSpace.java:60)
     at oracle.sysman.oii.oiis.OiisCompContext.doQuery(OiisCompContext.java:2520)
     at Components.oracle.assistants.dbca.v9_2_0_1_0.CompContext.getCalculatedValueObject_pn_softwareSize(CompContext.java:4520)
     at Components.oracle.assistants.dbca.v9_2_0_1_0.CompContext.getCalculatedValueObject(CompContext.java:2904)
     at oracle.sysman.oii.oiis.OiisCompContext.getCalculatedValue(OiisCompContext.java:655)
     at oracle.sysman.oii.oiis.OiisVariable.getCalculatedValue(OiisVariable.java:1331)
     at oracle.sysman.oii.oiis.OiisVariable.setVariable(OiisVariable.java:2162)
     at oracle.sysman.oii.oiis.OiisCompContext.doOperation(OiisCompContext.java:1106)
     at oracle.sysman.oii.oiif.oiifb.OiifbLinearIterator.iterate(OiifbLinearIterator.java:131)
     at oracle.sysman.oii.oiic.OiicCompsWizEngine.doOperation(OiicCompsWizEngine.java:198)
     at oracle.sysman.oii.oiif.oiifb.OiifbLinearIterator.iterate(OiifbLinearIterator.java:131)
     at oracle.sysman.oii.oiic.OiicInstallSession$OiicSelCompsInstall.doOperation(OiicInstallSession.java:3425)
     at oracle.sysman.oii.oiif.oiifb.OiifbCondIterator.iterate(OiifbCondIterator.java:162)
     at oracle.sysman.oii.oiic.OiicPullSession.doOperation(OiicPullSession.java:937)
     at oracle.sysman.oii.oiic.OiicSessionWrapper.doOperation(OiicSessionWrapper.java:230)
     at oracle.sysman.oii.oiic.OiicInstaller.run(OiicInstaller.java:399)
     at oracle.sysman.oii.oiic.OiicInstaller.runInstaller(OiicInstaller.java:717)
     at oracle.sysman.oii.oiic.OiicInstaller.main(OiicInstaller.java:628)
have played with different versions of java, tried installer from 10R1, same result. :(
please help.
Hi. same configuration and same result...failed at 91%. anilech, wondering if you ever were able to successfully finish the install and what you did.Thanks.

Solman installation stuck with error - SLES 10 , Oracle 10.2.0.4

Hi,
Solman 7.0 installation with ehp1 installation stuck with error - SLES 10 , Oracle 10.2.0.4
the error is at the step install DBA tools -> error is 'select status from v$instance did not match /^\s(\S+)\s$S/gNaNOPEN MIGRATE'.)
Just FYI : we had issue while installing Oracle , we have followed work arround 3 in the SAP Note 980426
Kindly help to proceed further
Thanks & regards,
Prabhakar Reddy.Y.C.

sapinst.log
CJS-00084 SQL statement or script failed. DIAGNOSIS: Error message: ORA-01092: ORACLE instance terminated. Disconnection forced
Disconnected from Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bit Production
With the Partitioning, Data Mining and Real Application Testing options
. SOLUTION: For more information, see ora_sql_results.log and the Oracle documentation.
ERROR 2010-11-21 06:55:22.502
MUT-03025 Caught ESAPinstException in Modulecall: ORA-01092: ORACLE instance terminated. Disconnection forced
Disconnected from Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bit Production
With the Partitioning, Data Mining and Real Application Testing options
ERROR 2010-11-21 06:55:22.533
FCO-00011 The step runSapdbaroleSql with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|2|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|
NW_CreateDB|ind|ind|ind|ind|0|0|NW_OraDBCheck|ind|ind|ind|ind|0|0|NW_OraDBMain|ind|ind|ind|ind|0|0|NW_OraDBStd|ind|ind|ind|ind|3|0|NW_OraDbaTools|ind|ind|ind|ind|11|0|
runSapdbaroleSql was executed with status ERROR ( Last error reported by the step :Caught ESAPinstException in Modulecall: ORA-01092: ORACLE instance terminated. Disconnection forced
Disconnected from Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bit Production
With the Partitioning, Data Mining and Real Application Testing options
Edited by: prabhakaryc on Nov 21, 2010 7:01 AM

CJS-30022 ECC6.0 SR3 installation error on SLES 10 SP2 DB2 9.5 64 bit

same post on linux forum:
error in ECC.ERP
Hello
I'm stuck with installation on newly build machine Intel Xeon and 5 GB RAM.
System SLES 10 SP2 and all patches applied. IBM Java 142 v 10 (latest from OSS note for x86_64) but tried also with SLES provided sun java (same error).
All steps from 958253 has been applied, 1125951 suggest installeion of "pdksh" shell but that is not available in SLES - ksh is installed, saplocales version 3 also.
sapinst.log
INFO 2008-06-25 10:14:13.955
Creating file /db2/IED/sapdata3/sapinstdir1/sapinst_instdir/ERP/SYSTEM/DB6/CENTRAL/AS/import_monitor.java.log.
INFO 2008-06-25 10:14:13.985
Output of /opt/IBMJava2-amd64-142/jre/bin/java -classpath migmon.jar -showversion -Xmx1024m com.sap.inst.migmon.imp.ImportMonitor -sapinst is written to the logfile import_monitor.java.log.
WARNING 2008-06-25 10:14:14.177
Execution of the command "/opt/IBMJava2-amd64-142/jre/bin/java -classpath migmon.jar -showversion -Xmx1024m com.sap.inst.migmon.imp.ImportMonitor -sapinst" finished with return code 1. Output:
java version "1.4.2"
Java(TM) 2 Runtime Environment, Standard Edition (build 2.2)
IBM J9SE VM (build 2.2, J2RE 1.4.2 IBM J9 2.2 Linux amd64-64 j9xa64142-20080130 (JIT enabled)
J9VM - 20071205_1933_LHdSMr
JIT - r7_level20071016_1845)
The java class is not found: com.sap.inst.migmon.imp.ImportMonitor
WARNING[E] 2008-06-25 10:14:14.181
CJS-30022 Program 'Migration Monitor' exits with error code 1. For details see log file(s) import_monitor.java.log, import_monitor.log.
ERROR 2008-06-25 10:14:14.279
FCO-00011 The step runMigrationMonitor with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|2|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_ABAP_Import_Dialog|ind|ind|ind|ind|5|0|NW_ABAP_Import|ind|ind|ind|ind|0|0|runMigrationMonitor was executed with status ERROR .
import_monitor.java.log
java version "1.4.2"
Java(TM) 2 Runtime Environment, Standard Edition (build 2.2)
IBM J9SE VM (build 2.2, J2RE 1.4.2 IBM J9 2.2 Linux amd64-64 j9xa64142-20080130 (JIT enabled)
J9VM - 20071205_1933_LHdSMr
JIT - r7_level20071016_1845)
The java class is not found: com.sap.inst.migmon.imp.ImportMonitor
there is no import_monitor.log available.
I'm using ECC 6.0 SR3 fresh downloaded instalallation disks and DB6 9.5 from SAP service.sap.com.

Finally i've resolved this problem. You can't use /db2/SID/sapdata(n) directory as a your sapinst installation directory becouse sapinst is setting strange access rights to whole /db2/SID tree and sidadm user can't do any activity below.
It's my first SAP DB6 based instalallation (i've done dozen of times on Oracle and there it was possible) and this is new for me.
Note 967123 is describing this problem "ABAP: Error in step extractMigrationMonitorArchive
The installation aborts in step extractMigrationMonitorArchive.
Solution:
Download a patch of MIGMON.SAR from the SAP service marketplace
(for more information see SAP note 784118) and extract the archive as
user <sapsid>adm into the current installation directory
(using SAPCAR with the option '-xvf')
Then restart SAPinst or re-execute the step."
And it looks that user sidadm is unpacking MIGMON.SAR.
Thanks for hints.

CJS-30022 ECC6.0 installation error on SLES 10 SP2 DB2 9.5 64 bit

Hello
I'm stuck with installation on newly build machine Intel Xeon and 5 GB RAM.
System SLES 10 SP2 and all patches applied. IBM Java 142 v 10 (latest from OSS note for x86_64) but tried also with SLES provided sun java (same error).
All steps from 958253 has been applied, 1125951 suggest installeion of "pdksh" shell but that is not available in SLES - ksh is installed, saplocales version 3 also.
sapinst.log
INFO 2008-06-25 10:14:13.955
Creating file /db2/IED/sapdata3/sapinstdir1/sapinst_instdir/ERP/SYSTEM/DB6/CENTRAL/AS/import_monitor.java.log.
INFO 2008-06-25 10:14:13.985
Output of /opt/IBMJava2-amd64-142/jre/bin/java -classpath migmon.jar -showversion -Xmx1024m com.sap.inst.migmon.imp.ImportMonitor -sapinst is written to the logfile import_monitor.java.log.
WARNING 2008-06-25 10:14:14.177
Execution of the command "/opt/IBMJava2-amd64-142/jre/bin/java -classpath migmon.jar -showversion -Xmx1024m com.sap.inst.migmon.imp.ImportMonitor -sapinst" finished with return code 1. Output:
java version "1.4.2"
Java(TM) 2 Runtime Environment, Standard Edition (build 2.2)
IBM J9SE VM (build 2.2, J2RE 1.4.2 IBM J9 2.2 Linux amd64-64 j9xa64142-20080130 (JIT enabled)
J9VM - 20071205_1933_LHdSMr
JIT - r7_level20071016_1845)
The java class is not found: com.sap.inst.migmon.imp.ImportMonitor
WARNING[E] 2008-06-25 10:14:14.181
CJS-30022 Program 'Migration Monitor' exits with error code 1. For details see log file(s) import_monitor.java.log, import_monitor.log.
ERROR 2008-06-25 10:14:14.279
FCO-00011 The step runMigrationMonitor with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|2|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|
NW_ABAP_Import_Dialog|ind|ind|ind|ind|5|0|NW_ABAP_Import|ind|ind|ind|ind|0|0|runMigrationMonitor was executed with status ERROR .
import_monitor.java.log
java version "1.4.2"
Java(TM) 2 Runtime Environment, Standard Edition (build 2.2)
IBM J9SE VM (build 2.2, J2RE 1.4.2 IBM J9 2.2 Linux amd64-64 j9xa64142-20080130 (JIT enabled)
J9VM - 20071205_1933_LHdSMr
JIT - r7_level20071016_1845)
there is no import_monitor.log available.
The java class is not found: com.sap.inst.migmon.imp.ImportMonitor

Finally i've resolved this problem. You can't use /db2/SID/sapdata(n) directory as a your sapinst installation directory becouse sapinst is setting strange access rights to whole /db2/SID tree and sidadm user can't do any activity below.
It's my first SAP DB6 based instalallation (i've done dozen of times on Oracle and there it was possible) and this is new for me.
Note 967123 is describing this problem "ABAP: Error in step extractMigrationMonitorArchive
The installation aborts in step extractMigrationMonitorArchive.
Solution:
Download a patch of MIGMON.SAR from the SAP service marketplace
(for more information see SAP note 784118) and extract the archive as
user <sapsid>adm into the current installation directory
(using SAPCAR with the option '-xvf')
Then restart SAPinst or re-execute the step."
And it looks that user sidadm is unpacking MIGMON.SAR.
Thanks for hints.

BO XI 3.1 Enterprise SP4....Installation error messge

Hello Team,
I am getting the following Error message while trying to install the Service pack 4 for XI 3.1 . Following are the error message"The install was unable to connect to the CMS. Please ensure the existing CMS hostname and port are correct, and try again". Following are the steps i take:
1. Create another SAI with different port number but it did not help.
2. Copy the Installation on local drive and run the set up , still the same error.
Environmental Details:
BOE XI 3.1 SP3
Windows Server 2008 sp2.
SQL server 2005 CMS database.
SP3 was succesfully Installed on the same machine in Dec 2010. There has not been any change in database or in server apart from the Monthly Windows updates.
I even created the Ticket with SAP but they are telling to roolback to old windows update which is impossible as the server team applies the updates everymonth.
It would be great if i get any assistance.
Regards,
Sonu Pandita

Hi,
We are trying with BOE XI 3.1 and SLES 10 SP2 : Same error with Oracle rep or Mysql bundle.
Symptom:
     "[error] [PostInstallScripts::WaitForCMS] CMS is not started, giving up." while installation of BOE XIR3.1 on SuSE Linux Enterprise Server 10 SP2.
     On the log file called BusinessObjects.12.1.log.summary under the path [installdir]\setup\logs contains the above error message.
     On the log file called BusinessObjects.12.1.log at same path the error "Return code from cmslogon.jar: 1" can be found many times showing that the system tried to start the CMS many times unsuccessfully
The SAP Note 1390781 is not working. Does anybody solve the issue?
thanks
Javier

SLES Install.... problem getting started. At a loss

I have downloaded the SLES-11-sp2-x86-64-gm-DVD1 and DVD2 and burned the .iso's to a 2 disk set. I verified the disks and read the "readme" file on the dvd1 disk that says to insert and boot off of this disk. I have a fresh 2TB Seagate HD for a new install w/ 37gb windows partition and balance unformatted. Intel i5 processor on the new server. Boot sequence is set to CD/DVD player as first boot. When I try to boot all I get is the error "no operating system found. Press any key to repeat boot sequence." I know the boot sequence of drives is set correctly because boot disks for other op systems work fine as a test.
What am I doing worg this time???

So, might be talking to myself here but really need some advise.
The SLES-11-sp2-x86-64-gm-DVD1 I burned the .iso for did finally boot. Burned it off on another computer DVD burner.
I go through all of the install process, booting with the SLES....DVD 1. I am using a fresh 2TB disk this time(s) with all unallocated spce. The install goes through without showing any errors and then goes to the countdown to re-boot and re-boots. Re-booting with the DVD-1 disk removed, I still get the error "No operating system found. Press any key to repeat boot sequence." Which will not go away.
So, if I try again and put the SLES-11....DVD-1 install disk back in beforre-booting , re-boot and go to "repair installation" instead of new installation and then to "automatic repairs", I get a message under "Check File Systems" that says:
"Installing Kernal Modules for File System Support"
Loading failed for kernal modules: ntfs problematic
The auto repair does not allow boot file to be created and I'm stuck.
Still at sqaure one, just the other side of the square.
Still really needing help. If I don't get any replies, I'll try a new thread.
Thanks
johnb

Oracle EBS 11.5.10.2 Installation Steps

Although this is by no means exhaustive or the most accurate, all contributions and/or corrections are welcome
As I attempt to reply the numerous calls and emails I have been getting, firstly sorry guys, I have been settling down at a new job, and haven’t had time to locate my implementation notes, however find below the steps I followed with a successful result.
Installing Oracle E-Business (EBS) Release 11i (version 11.5.10.2)
Linux Installation – SLES 9 Rel 1
•     Please follow these instructions – I could not have written a better set of instructions :
http://www.novell.com/coolsolutions/feature/16009.html
NOTE: Although this is written for SLES 9.1, I believe this will work for any Linux variant.
Also, make sure you have installed openmotif 2.0 or higher to make sure the forms server starts and remains running
Windows 2003 Server SP 1
Environment:
Windows 2003 Server was installed as an environment on VMWare Server (The free one).
Hardware Spec:
P4 800 Mhz CPU
2GB (Physical RAM) and 1GB (Virtual RAM)
250 GB (Physical HDD), 120GB (Virtual HDD)
DVD RW
DECLARE
At this point I have to say a few things:
1.     I have not attempted installing on any other version of Windows, so if you try with another version, I may not be able to answer your questions, although I believe it should not be any different.
2.     I would believe you can or have access to the internet and can download or find most of the resources needed.
3.     I would assume you have installed the Windows 2003 Server with SP 1, Internet Explorer and Outlook. Also, have included an IP address, a server name with its domain extensions in the host file.
4.     I would assume that you have created one group – dba , two users applmgr and oracle and included them in the dba and administrator groups
5.     I would assume that you are at least familiar with the terms and usage of abbreviations in this sort of environments.
6.     I would also assume you have reviewed and have made allowance to meet the required specification in terms of hardware (I did not attempt an installation on the USB HDD, so may not be able to help, if this applies to your situation)
BEGIN
     Prepare Environment
Download and have read the following software:
1.     Java Development Kit 1.3 (or higher version)
http://java.sun.com/downloads/index.html
2.     Active Perl – This is needed for the staging script adautostg.pl http://www.activestate.com/store/productdetail.aspx?prdGuid=81fbce82-6bd5-49bc-a915-08d58c2648ca
3.      Visual C++ - This is needed for many of the real-time code compilation
http://msdn.microsoft.com/vstudio/express/visualc/download/
4.      CYGWIN
http://www.cywin.com/setup.exe     (Free open source, never expires!)
OR
MKS Toolkit (Evaluation copy, 30 Trial or get a licence for about $500)
http://www.mkssoftware.com/eval/
This is necessary for certain unix-only available utilities required to implement/compile Oracle E-business Suite, such as which, make, cc, etc.
5.     The DVDs or downloaded zipped copy of the entire Oracle E-Business Suite software for Windows 32-Bit ( I did not attempt on a 64-Bit processor, though I believe it should not be different, but see the necessary documentation if that is your situation)
http://edelivery.oracle.com
6.     Jinitiator – This is required to run the forms on your system (Although a first attempt to view any of the form interfaces downloads and requests this be installed first) http://www.oracle.com/technology/software/htdocs/devlic.html?url=http://otn.oracle.com/software/products/developer/htdocs/jinit.htm
NOTE:
•     DO NOT Install into the default directories and do not allow spaces in file directories/path when installing the software, somehow experience has shown that the Oracle EBS does not handle spaces in file directories well, and results in untold hardship if ignored. E.g Default installation folder for an software installation may suggest C:\Program Files\ JDK 1.5, MAKE SURE you alter this to something like C:\JDK15. DO THIS FOR ALL SOFTWARE INSTALLED
•     After each software installation, please reboot the system before installing the next piece.
•     Make sure that all the paths to the bin folders for all software installed is included in the environment variables, and verify by typing path in the command prompt to display all paths listed
•     If using CYGWIN (like I did, as I could not afford a software expiring on me nor could afford $500 for a test). You may choose all the modules available, but you do not need all (it will be an overkill to have the entire unix utilities and libraries on your windows box, unless you plan on learning unix commands or into heavy development requiring a unix environment, without wanting a unix machine) MAKE SURE you choose all the library options, all the development options and that should be OK. Then confirm after the installation by typing which, cc (or gcc), make(gnumake), ls, gawk(awk), grep (egrep) (IMPORTANT:Where one of the other in brackets exists, copy and rename the copy as the alternative). As a double sure – copy all of these into C:\Bin directory.
•     If the Oracle EBS is downloaded, unzip all the files into the folder and ignore any suggestions that it will over-write other files such as the component.label files
Installation Proper
•     Run adautostg.pl – which you will find in the StartCD i.e the first file downloaded and unzipped. This will attempt to rearrange the installation files in the order in which the installation wizard – rapidwiz prefers and identifies the folders. (Saves you hand-holding the wizard by having to interact during the installation, pointing it to the relevant folders/files if not run) to create the staging area.
•     Run Rapidwiz – either by double clicking the rapidwiz.cmd in the startcd folder (this would be the one in the staging area) or from the command prompt
•     As required, point rapidwiz, to the bin folder of cygwin e.g C:\cygwin\bin (if this is as installed) in the place where it requires the MKS Toolkit
•     Pre-installation Checks – rapidwiz intelligently tests all the necessary software and requirements before installation starts. A corresponding message to each parameter suggests the opinion of the rapidwiz whilst a green tick indicates the parameter is sufficient, other indicators may need reviewing. Please make sure you resolve each issue before progressing with the installation. This may lead to a waste of time if not resolved.
•     Choose a single-node installation
(if just testing or practicing, you may also choose a multi-node if this is what you want.)
•     If all the modules are not needed (I installed all), you may have to choose which modules you require, and state where you want the modules installed.
•     Assuming all parameters are passed and installation begins, the different stages of the installation steps can be followed by the on-screen messages or log file reviews (each logfile directory will be displayed on the screen during the installation of each context).
•     Post Installation Checks – Rapidwiz does some checks after an installation, whether successful or not, and provides a report. When an installation is successful. It confirms and provides the url to login. The default username and password for the system administrator is usually sysadmin / sysadmin. You are encouraged to create another user immediately.
For all who asked, depending on how far up your hardware scales in terms of specifications, the installation may take about 3 hours (at least mine did) or more.
Login on to Oracle EBS !
The URL required for logging on to the OAM (Oracle Application Management - For the Apps DBAs) and OEBS (Oracle E-Business Suite - essentially for the Functional Implemeters/Consultants ) - The entire gamut (They are shown as hyperlinks), should be as follows;
http://hostname(servername.domainname.com):8000/
where hostname is the same as specified in your host file e.g servername.domainname.com or .whatever-u-like
and
8000 - is the default port, but you may have chosen your own port and that should be used in such a case.
N.B - The Forms server is often started when an attempt is made to access such an interface after login in to the OEBS. However, in my own case, it did not until I made sure openmotif 2.1 was installed on my SuSE Linux Enterprise Server 9.1. The windows installation started without any issues.
If all attempts fails….
You may have to try and try again by deleting all installation files and starting all the installation steps again. It will help if you know how to edit your registry settings to delete all reference to oracle e-business (not all reference to oracle though, as some odbc-related entries have been installed by Microsoft and require your registry settings to function)
Alternatively, send me your box, your mailing address and a token (money of course, and I may be able to set it all up for you) – JOKING!
CAVEAT: I will not be held responsible if anything unsavoury happens to your system in the course of you following the steps I have highlighted above either correctly or incorrectly. However, if you are successful, please sing my praises all over the forum and ask that I be rewarded by Oracle!
Olu

Hi
If anyone need the document to "How to install Oracle Applications 11i on Windows 2003" i can forward the document with screen shots with detailed steps.
Reg
Dwaraka

Install of SAP on Linux -glibc-32bit-8.1-9 for Novell SUSE SLES Linux 10.

Hi All
We are installing the Oracle on x86_64 using Novell SUSE SLES 10.
As per OSS note 841728 , (Installation Proble #8) for SUSE\UnitedLinux x86_64 ) we should have glibc-32-8.1-9 and glibc-devel-32bit-8.1-9 installed.
We have glibc-32bit-2.4-31.30 and glibc-devel-32bit-2.4-31.30 installed on Linux server.
My question are :-
1) Do we must have these files (glibc-32-8.1-9) installed? Or will do with glibc-32bit-2.4-31.30.
As OUI gives following warning during installation :-
Checking recommended glibc version.......failed
2 ) where to get these files from? I was unable to find these RPMs?
Any help is much appreciated.
Thanks

Dear Hannes
First of all thank you for the reply.
Yes, I am using the "RUNINSTALLER" from SAP directory, but updated "RUNINSTALLER" I downloaded as per OSS note 980426.
Using workaround # 3 , recommended by SAP.
I have downloaded these Oracle CD's (material # 51031676) from service market place 5days ago and they are dated as 11-04-2006.
I have to use OSS note 980426 as I was getting following error
/oracle/stage/102_64/database/SAP/SVRCUSTOM.RSP --> /tmp/.orainst_rsp.18836: Done
Starting Oracle Universal Installer...
Checking installer requirements...
Checking operating system version: must be redhat-3, SuSE-9, redhat-4, UnitedLinux-1.0, asianux-1 or asianux-2 Failed <<<<
Here are the messaged I am getting from OUI
Msg#1
===========================================
Checking operating system requirements ...
Expected result: One of redhat-3,redhat-4,SuSE-9
Actual Result: SuSE-SUSE Linux Enterprise Server 10 (x86_64)
Check complete. The overall result of this check is: Failed <<<<
Problem: Oracle Database 10g is not certified on the current operating system.
Recommendation: Make sure you are installing the software on the correct platform.
=======================================================================
Msg#2
Checking operating system package requirements ...
Check complete. The overall result of this check is: Not executed <<<<
OUI-18001: The operating system 'Linux Version SuSE-SUSE Linux Enterprise Server 10 (x86_64)' is not supported.
Recommendation: Install the required packages before continuing with the installation.
=======================================================================
Msg#3
Checking security kernel parameters
Check complete. The overall result of this check is: Not executed <<<<
OUI-18001: The operating system 'Linux Version SuSE-SUSE Linux Enterprise Server 10 (x86_64)' is not supported.
Recommendation: Perform operating system specific instructions to update the kernel parameters, namely BIT_SIZE and noexec_user_stack.
=======================================================================
Msg#4
Checking Recommended glibc version
Check complete. The overall result of this check is: Not executed <<<<
OUI-18001: The operating system 'Linux Version SuSE-SUSE Linux Enterprise Server 10 (x86_64)' is not supported.
Recommendation: You may actually have installed packages which have obsoleted these, in which case you can successfully continue with the install. If you have not, it is recommended that you do not continue. Refer to the readme to find out how to get the missing packages.
========================================
So, I was more concern about Msg# 4, and that's how I came across OSS note Note 841728 - Installation problem #8.
So, I believe we are OK to go ahead and run the installation of Oracle, isn't it????
Thank you again.
Sandeep

How to Install Oracle 10g in SLES 10 32 bit

Hello Guys,
I was intalling oracle 10g in SUSE LInux Enterprise Server 10, but i always have an error..
Is there someone who can have and give a manual on how to install oracle 10g in SLES10? ANd some linux shell scripting
manual..?

Hi,
have a look at:
http://www.oratoolkit.ch/knowledge/howto/installation/otn.php
you will find there your SLES and Oracle specific installation guide. With korn shell script you will be able to install Oracle within 60 minutes.
Good luck!
Cheers,
David
OCP 9i / 10g / 11g

Installation 9.2.0.4 on SLES 10.2

Similar Messages

Maybe you are looking for