Installation and run problem

The previous user of my computer used jdk1.3. However, I got error message when I run the program(there is no compile error). The message is:
Error occured during initialization of VM
java/lang/NoClassDefFoundError: java/lang/Object
Hence, I tried to install jdk1.3.1 and set the new path and classpath. Unfortunately, I cannot install it. I downloaded and installed jdk1.3.1 three times as well as jdk1.4 once. I always got error message:
This self extracting executable file appears to have been corrupted and cannot be executed. You should obtain a new copy of this file to insure that it will execute correctly.
I use Windows NT 4.0. I don't know this is the problem of my machine system or the problem of installation
Please give me some suggestion!
Any help is greatly appreciated!

Well, I'd say a Windoze error, but you may try:
1. Try to uninstall Java, if it's available with the add/remove programs, and then install the new copy.
2. If it cannot work, try to locate the files of the previous install (c:\jdk1.3 is most likely, but depends on your collegue.) If you find them, remove all. Update your start menu so it won't contain anything java-related, and delete the JavaSoft subdir in your "Program files" directory. Use regedit to edit your registry. Use it with caution - you may destroy your windoze. Open HKEY_LOCAL_MACHINE, then SOFTWARE, and delete the JavaSoft key (right-click, delete). Go to the WinNT directory, and the System32 subdir. There, delete the files java*.* Now you can try again to install it. If you still unable to do so, well, try to unzip the file (winzip will open it) to a temp directory, and run setup there.
If it still cannot work, try to find another WinNT wkstation, and install the package there. It probably will succeed, so you have the only option - reinstall WinNT and all the programs.
Bad news is that I've seen this happen once, and only Windows reinstall helped. However, "inheriting" a PC from someone, well, I'd prefer to reinstall everything for sure. Ain't need no sticky files of my collegues... :-)

Similar Messages

Unable to install flash player. After downloading the Adobe FLash Player Installer and running it, a grey pop up window opens up but nothing is displayed in it. There is no progress bar or anything.

Unable to install flash player. After downloading the Adobe FLash Player Installer and running it, a grey pop up window opens up but nothing is displayed in it. There is no progress bar or anything and even after keeping it running for a long time there is no progress. Please help with this issue.

Hi Prat,
We are aware of this issue and are working on a fix. In the mean time, please use the offline installer, posted at the bottom of the help page corresponding with your OS and browser:
Installation problems | Flash Player | Windows
Installation problems | Flash Player | Mac
The installers are at the bottom of the page, in the 'Still having problems' section.
Maria

Acrobat x pro crash after installation and running it, exit code 16,

Acrobat x pro crash after installation exit code 16
I installed Adobe acrobat X pro 10.0 trial and every time after installation and running the software it give me the following error message
Please uninstall and re install the product, if the problem still occurs contact Adobe etc….
Error code shutdown 16
I’m using window 7 ultimate 32-bit service Pack 1.
I uninstalled also the adobe reader but with no hope,
If anyone can support me with this issue I will be grateful.

Please check the solution provided under the below articles and check if that helps. Few users have resolved their issues by following it.
http://forums.adobe.com/message/4648705
Also, try running the below Microsoft fixit and check if that works.
http://go.microsoft.com/?linkid=9708107
If still same issue, follow "http://helpx.adobe.com/creative-suite/kb/error-1603-install-cs5-products.html"
[Moved the discussion to Acrobat Installation & Update Issues Forum]

Create installer and running: MsiError 87: Unable to format error record.

Ever since I have installed the Labview 2011 beta I am in trouble when creating installers that include the NI runtime.
Whether it is Labview 2010 or 2011, when I have created the installer and run it, I -and everybody else- gets the warning:
MsiError 87: <Unable to format error record.>
And the installer qwill quit.
When I exclude the runtime from the installer it works nicely. What can I do to fix it?

Did any of you actually read the beta agreement?
Issues with the beta are not be be discussed in public so don't keep posting here.
The terms and conditions of the beta program are posted on the beta site and you agreed to them, so make sure to fully understand them. The only public information is that a beta exists. Everything else is confidential.
Let me put it in a few simple words:
"Welcome to Fight Club beta. The first rule of Fight Club beta is: you do not talk about Fight Club beta. The second rule of Fight Club beta is: you DO NOT talk about Fight Club beta!)
LabVIEW Champion . Do more with less code and in less time .

Acarbat Freezed after installation and run it for Mac Pro!

Dear all,
I tried to install Acrobat 9 Pro to one station this morning (or install
Adobe Reader 9 couple days ago), but the system hanged after installation
and ran it. Clicking "force quit", it showed that "Acrobat (no response)".
Following are the general description about the workstation and it is
connected to Mac server.
Workstation which tried to install Acrobat 9 Pro:
- Mac Pro Processor: 2* 3GHz Dual-core Intel Xeon
- Memory: 4GHz
- Mac OS X 10.5.6
Server
- Mac Pro Processor: Dual 2 GHz Power PC G5
- Memory: 3GHz
- Mac OS X Server 10.5.6
- Service: AFP, FTP, Open Directory (control the use login for all
workstations)
Installation procedures:
- Login the workstation as an Administrator (local)
- Install Acrobat 9 PRO
- Registration
- Shut down the workstation after installation
- Restart the workstation
- Use my unique name to login (all my files are stored in Server)
Problem:
- Double-click "Acrobat 9 Pro" to run the software, it hangs
or
- Click one PDF file and use "Open with" to select "Acrobat 9 Pro", it
hangs again.
Does anyone have the same situation or have any idea to solve this
problem?
I really appreciate your kind help.
Best,
Ei-Wen

Home>Library>Preferences>com.apple.SoftwareUpdate.plist. Trash this file, repair permissions and restart your computer. Empty the trash when done.
P.S. If you shut down your computer, the window should have disappeared. Why didn't you use Force Quit?

Installation and run

I downloaded camera raw 6.2. Please tell me how to install and run?

Hi Shinnan kiang,
Can you follow the instructions on this page and let us know if you still need help?
http://www.adobe.com/support/downloads/detail.jsp?ftpID=4807
Thanks,
Preran

Compiling and running problems

Dear Friends:
I believe I encountered a very difficult situation when I try to run Fortran
files in Sun Sparc Solaris 8.0.
I would like to describe it, hopefully someone can give me some suggestions.
The the files I try to run is fortran 77 files developed originally for VAX
machine, later on there are Linux and Unix adaptions (but not for Sun
Solaris). The source code is open source from the link:
http://www.webmo.net/support/mopac_linux.html. I have compiled and run
successfully in Redhat 9.0 (means same results as the samples). The linux
dependency is gcc (or egcs) glibc (or libc) f2c.
Also it is compatible with SGI IRIX unix system with the dependency MIPSpro Fortran 77 and MIPSpro C as the link http://www.webmo.net/support/mopac_sgi.html. I havenot tried it yet.
In sun solaris, I have tried g77, but even cannot compiled. With Apogee's
F77 (www.apogee.com), it can be compiled, but cannot run completely (terminate in the middle
process, i.e. without the complete output as the samples).
Could anyone take a time do a analysis and provide me any suggestions?
thanks a lot,
Justin

Justin,
I downloaded the mopac tarball and compiled it on Sun Solaris using the Sun Studio 10 compiler. The code compiles successfully with only a small change to the included Makefile.
Change the original unix target as follows:
unix:
f77 -w -O -static *.f -o $(EXE)
becomes
unix:
f90 -f77 -w -O *.f -o $(EXE)
I noticed during the compilation that there were a number of BLAS and LAPACK routines that are being compiled into the application. The Sun Studio compilers include a high performance BLAS/LAPACK library called the Sun Performance Library which provides highly tuned versions of the BLAS/LAPACK routines called by this application. I would be more than happy to help you modify the source and makefile so that you can use these tuned routines and realize increased performance in this application.
I ran several of the data sets in the examples directory and they appeared to complete successfully. Since none of them run for more than a second or so, it's hard to say whether or not the tuned Performance Library will have a large impact on the performance or not.
If you are interested, please contact me : [email protected]

Installation and Run Guide?

I don't understand how Sun can build software that is at the forefront like Java is and then not support it very well. Initially a few years ago I got servlets running with Apache and Jserv. Well, now I'm trying to get everything running with the latest and find this web site appalling. There is no instructions on how to get the servlet software running anywhere that I can find on the site. Plus there are links that go nowhere! There is not even documentation to tell you where to put the compiled java code or the html code. Instead I have to experiment with the example programs. WTF! Get some people to document this stuff and make it accurate. You're only hurting Sun's chances of success which as far as I can tell from the company stock, heading south.
I've download the JSDK1.4 and J2SDKEE edition which says that it has the servlet spec 2.4 code in it. Now what? Do I do something with classpath. Is there no longer a servlet.jar file because I don't see one in the directory?
GET SOME PEOPLE THAT KNOW HOW TO DOCUMENT THE SOFTWARE BEFORE YOU GO UNDER! It's tiring working with software as it is and then to fight installation problems.

You are upgrading from apache/jserv to what? Latest apache/tomcat setup?
If so you would have better luck at thier sites to get documentation:
http://jakarta.apache.org/tomcat (tomcat)
http://httpd.apache.org (apache)
seeing that sun does not support thier product. If you have code specific questions, Sun has got you covered.
http://java.sun.com/apis.html

Pages 2 doesn't do anything after installation and run!

Just intalled iWork 06 and when I start KN3, it says the application has unexpectedly quit.
When I start Pages 2, it asks me to register, then Pages opens, but nothing happens. I see the menubar and then if I try to start a New Document, nothing happens...
if I try to open a txt doc, it says it can"t open it!
Seems iWork 06 installation is flawed..
I'm working on Tiger, latest current update, on a quicksilver G4 Dual 1ghz.
Keynote 2 still launches just fine!

I don't think that this error is the problem - looking in fnd_td_mig_cmds, it seems that the error accured in 16:07 in 4/9, but after this there were many command that succeed - when the last of them was in 17:45,
Moreover, it seems from fnd_td_mig_cmds that in 6/7 in 13:30 , a few more tables were moved, and now the migration process on 3.64% instead of 3.6%. but nothing new was written in any of the log files, and I can't find any other errors in the table or in the report.
In fnd_id_mig_cmds there are 4 rows with status that is not 'SUCCESS' - the one error mantioned above, and 3 move commands:
alter table "hr"."PER_ALL_ASSIGMENTS_F" MOVE TABLESPACE APPS_TS_TX_DATA" NOPARALLEL NOLOGGING
alter table "hr"."PAY_ELEMENT_ENTRY_VALUE_F" MOVE TABLESPACE APPS_TS_TX_DATA" NOPARALLEL NOLOGGING
alter table "hr"."PAY_ELEMENT_ENTRY_F" MOVE TABLESPACE APPS_TS_TX_DATA" NOPARALLEL NOLOGGING
As I mentioned in my previous post, there are 3 open cmd window on the server of the utility. Can it mean that the migration is just going very slow? and what is it possible to do about?I do not see any similar hits on MOS website except for (Oatm Conversion Is Hanging While Generating Migration Command [ID 445020.1]).
and yes, there are a lot of objects that weren't migrated..I checked some new tablespaces and some old, and they all have segments.I still suggest you fix the issue mentioned in your first post and do the migration again. You may also log a SR and see what Oracle support would suggest.
Thanks,
Hussein

Automatic payment config and run problem

hi friends,
Now the payments are generating on one bank account 123456, now client wants to post if the vendor payment morethan $1000 send through another bank account 987654 both are currency USD only and in bank determination(fbzp) the config is
bank   pm   curr
H101   T     USD
H101   T            (empty)
now the requirement is same as above config only bank account number changed.
am trying to do the config but system doesnt allowing the duplicates,
please tell me how i can acheive this problem.
Regards,
Pd

hi,
here my problem is if the payment is morethan $1000 use bank account no.987654 , and if the payment is lessthan $1000 use bank account no.123456.
both accounts are in USD only and GL account(bank subaccount) also different.
In Bank determination --> bank accounts am unable to give the same
For ex:
House bank    PM     Curr          accid         subaccount
DRE          S     USD     GIRO     113201
DRE          S          GIRO     113202
here one more i create like below (is it possible)
DRE          S     USD     SIRO     113233
Regards
Pd

OCW installation and running root102.sh

Hi,
I'm trying to upgrade from ORACLE ClusterWare 10.2.0.1.0 to 10.2.0.4.0. We have two nodes and I've completed firsts steps and now i running root102.sh in each node. Can anyone help me, to solve this issue?
In first node I have this message:
[root@machine install]# ./root102.sh
The clusterware daemons are running from /dev/raw/raw1: bound to major 8, minor 1
/dev/raw/raw2: bound to major 8, minor 2
/datos/ocw/product/10.2.0. But you are patching /datos/ocw/product/10.2.0
[root@machine install]#
[root@machine install]#
[root@machine install]# /datos/ocw/product/10.2.0/bin/crsctl stop crs
Stopping resources.
Error while stopping resources. Possible cause: CRSD is down.
Stopping CSSD.
Unable to communicate with the CSS daemon.
In second node I Have this message:
[root@machine2 install]# ./root102.sh
Creating pre-patch directory for saving pre-patch clusterware files
Completed patching clusterware files to /datos/ocw/product/10.2.0
Relinking some shared libraries.
Relinking of patched files is complete.
WARNING: directory '/datos/ocw/product' is not owned by root
WARNING: directory '/datos/ocw' is not owned by root
Preparing to recopy patched init and RC scripts.
Recopying init and RC scripts.
Startup will be queued to init within 30 seconds.
Starting up the CRS daemons.
Waiting for the patched CRS daemons to start.
This may take a while on some systems.
10204 patch successfully applied.
clscfg: EXISTING configuration version 3 detected.
clscfg: version 3 is 10G Release 2.
Successfully accumulated necessary OCR keys.
Using ports: CSS=49895 CRS=49896 EVMC=49898 and EVMR=49897.
node <nodenumber>: <nodename> <private interconnect name> <hostname>
node 2: machine2 machine2-priv machine2
Creating OCR keys for user 'root', privgrp 'root'..
Operation successful.
clscfg -upgrade completed successfully
[root@machine2 install]#
Best regards.
Javier Vargas
Bogotá Colombia - South America

Hi,
Thanks for reply Vasu, finally what i've done has been modify this line in root102.sh to force ORA_CRS_HOME be equal to CLUSTERWARE_HOME and has worked.
Thanks again,
Best regards
Javier Vargas
Bogotá Colombia - South America
CLUSTERWARE_HOME=`$ID/init.crs home`
if [ "$ORA_CRS_HOME" = "$CLUSTERWARE_HOME" ];
then
$ECHO "The clusterware daemons are running from $CLUSTERWARE_HOME. But you are patching $ORA_CRS_HOME"
exit 1
fi

Services are up and running - problem with browser access to Apps instance

We are using 11.5.10 and I have just finished a clone from our TEST environment.
We cannot connect to the login screen however.
I suspect there is a problem with the address we are using
http://*****.********l.com:8002/OA_HTML/AppsLocalLogin.jsp is the address for our TEST instance. and 8003 was for the previous encarnation of our newly cloned system.
Which configuration file can I check to see how this instance was configured?
I am looking at the adcfgclone returns and see nothing much except
Target system proxy hostname (used default)
Target system proxy port [80]: (left as this)
Should I check the context file for the new instance?
I am checking the webport , but no luck.
Again, in the context file, I see
<oa_web_server>

<hostname oa_var="s_webhost">****cl</hostname>
<externURL oa_var="s_external_url">http://****cl.****.com:8004</externURL>
(8004 was the last port used for this instance before cloning)
Should I check any specific table in the new instance??
Thanks,
DA
Or am I jumping the gun here? Do I need to initialize paraemeters first? (note 216205.1)
Edited by: Dan A on Oct 3, 2008 12:37 PM
Edited by: Dan A on Oct 3, 2008 12:39 PM
Edited by: Dan A on Oct 3, 2008 12:55 PM

Well, checking here oracli3/oracle/devora/iAS/Apache/Apache/logs in the error_log :
I see
Cannot load /oracli3/oracle/devora/iAS/Apache/Apache/libexec/mod_mmap_static.so
into server: A memory address is not in the address space for the process.
But the last date I see is for June (although the file itself is dated from yesterday)
Furthermore, in the error_log_pls, I see similar returns but again, the last date is from August:
Cannot load /oracli3/oracle/devora/iAS/Apache/Apache/libexec/mod_mmap_static.so
into server: A memory address is not in the address space for the process.
Syntax error on line 232 of /oracli3/oracle/devora/iAS/Apache/Apache/conf/httpd_
pls.conf:
Cannot load /oracli3/oracle/devora/iAS/Apache/Apache/libexec/mod_mmap_static.so
into server: A memory address is not in the address space for the process.
...

Help: Acrobat XI English version installs and runs in Swedish.

I am a USA customer using usa English. I have downloaded the Acro XI Pro install package three times from Adobe, both after purchase (which seems to be one separate download process) and as a trial download using the Adobe download install program.. Different sites, different methods. Installed manually twicw, allowed the Adobe downloader to install twice and installed on two different computers. Eash time, the opening sequence and various other pages/windows are in Swedish, not English. During the installation process, English is chosen every time.. These Swedish screens include various web links in Swedish as well as "local" screens. I have ten screen shots of the Swedish screens. I spent 2 hours with tech support, tried a variety of fixes, including repair.modify, uninstall re-install, and uninstall and re-downlaod, install: all to no avail. WTF?
Any insights?
Windows XP Pro SP3
500 GB free on HDD
3.4GB ram.
Your help will be most appreciated.

Please try this:
1) Go to control panel - Add remove programs
2) Select Acrobat XI entry. Click "change"
3) Click "Next". Select "Modify". Click "Next".
4) Click on the plus sign for the icon "Languages".
5) Remove all the languages other than English and click "Next" and then click "Update".
Please let me know if it works or not.
Thanks,
Amish.

Installation and copying problem

Whether I want to update my Adobe Reader 8 or try to download a ne Adove Reader 9 it fails when installing it. I receive the following message:
Error 1402 Could not open key:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\Current Version\Run\Optional\Components\MSFS
Veryfy that you have sufficient acces to that key.
What am I supposed to do?
My second questions is that I sometimes copy a few words from a sertain PDF-document and then paste them on a Word document. For some reason it does not work any more - copying works but when I paste the word on Word it is transformed to some block letters meaning nothing. What is wrong?
Would be most happy if you can help me.

Please see:
Error message when installing, modifying or repairing Adobe Reader

Using Firefox 7. Can log on and run problem for a while, then get message "Not connected. Trying to re-connect" But it never succeeds in re-connecting. If I exit Firefox and re-launch, it cures the problem. Get this problem with several different PCs

Chrome works fine. Haven't got desperate enough to try IE.
Friend reports similar problem with her system, which is not connected to mine.

* Try this.
* Type in the address bar about:config.
* Accept the warning.
* In the page that appears, in the Filter box, type network.http.max-connections.
* Change the value to 32 (which is probably set to 256 in your case).
* Close the about:config page.
* Restart the browser.

Installation and run problem

Similar Messages

Maybe you are looking for