Installation and run

I downloaded camera raw 6.2. Please tell me how to install and run?

Hi Shinnan kiang,
Can you follow the instructions on this page and let us know if you still need help?
http://www.adobe.com/support/downloads/detail.jsp?ftpID=4807
Thanks,
Preran

Similar Messages

Unable to install flash player. After downloading the Adobe FLash Player Installer and running it, a grey pop up window opens up but nothing is displayed in it. There is no progress bar or anything.

Unable to install flash player. After downloading the Adobe FLash Player Installer and running it, a grey pop up window opens up but nothing is displayed in it. There is no progress bar or anything and even after keeping it running for a long time there is no progress. Please help with this issue.

Hi Prat,
We are aware of this issue and are working on a fix. In the mean time, please use the offline installer, posted at the bottom of the help page corresponding with your OS and browser:
Installation problems | Flash Player | Windows
Installation problems | Flash Player | Mac
The installers are at the bottom of the page, in the 'Still having problems' section.
Maria

Acrobat x pro crash after installation and running it, exit code 16,

Acrobat x pro crash after installation exit code 16
I installed Adobe acrobat X pro 10.0 trial and every time after installation and running the software it give me the following error message
Please uninstall and re install the product, if the problem still occurs contact Adobe etc….
Error code shutdown 16
I’m using window 7 ultimate 32-bit service Pack 1.
I uninstalled also the adobe reader but with no hope,
If anyone can support me with this issue I will be grateful.

Please check the solution provided under the below articles and check if that helps. Few users have resolved their issues by following it.
http://forums.adobe.com/message/4648705
Also, try running the below Microsoft fixit and check if that works.
http://go.microsoft.com/?linkid=9708107
If still same issue, follow "http://helpx.adobe.com/creative-suite/kb/error-1603-install-cs5-products.html"
[Moved the discussion to Acrobat Installation & Update Issues Forum]

Create installer and running: MsiError 87: Unable to format error record.

Ever since I have installed the Labview 2011 beta I am in trouble when creating installers that include the NI runtime.
Whether it is Labview 2010 or 2011, when I have created the installer and run it, I -and everybody else- gets the warning:
MsiError 87: <Unable to format error record.>
And the installer qwill quit.
When I exclude the runtime from the installer it works nicely. What can I do to fix it?

Did any of you actually read the beta agreement?
Issues with the beta are not be be discussed in public so don't keep posting here.
The terms and conditions of the beta program are posted on the beta site and you agreed to them, so make sure to fully understand them. The only public information is that a beta exists. Everything else is confidential.
Let me put it in a few simple words:
"Welcome to Fight Club beta. The first rule of Fight Club beta is: you do not talk about Fight Club beta. The second rule of Fight Club beta is: you DO NOT talk about Fight Club beta!)
LabVIEW Champion . Do more with less code and in less time .

Acarbat Freezed after installation and run it for Mac Pro!

Dear all,
I tried to install Acrobat 9 Pro to one station this morning (or install
Adobe Reader 9 couple days ago), but the system hanged after installation
and ran it. Clicking "force quit", it showed that "Acrobat (no response)".
Following are the general description about the workstation and it is
connected to Mac server.
Workstation which tried to install Acrobat 9 Pro:
- Mac Pro Processor: 2* 3GHz Dual-core Intel Xeon
- Memory: 4GHz
- Mac OS X 10.5.6
Server
- Mac Pro Processor: Dual 2 GHz Power PC G5
- Memory: 3GHz
- Mac OS X Server 10.5.6
- Service: AFP, FTP, Open Directory (control the use login for all
workstations)
Installation procedures:
- Login the workstation as an Administrator (local)
- Install Acrobat 9 PRO
- Registration
- Shut down the workstation after installation
- Restart the workstation
- Use my unique name to login (all my files are stored in Server)
Problem:
- Double-click "Acrobat 9 Pro" to run the software, it hangs
or
- Click one PDF file and use "Open with" to select "Acrobat 9 Pro", it
hangs again.
Does anyone have the same situation or have any idea to solve this
problem?
I really appreciate your kind help.
Best,
Ei-Wen

Home>Library>Preferences>com.apple.SoftwareUpdate.plist. Trash this file, repair permissions and restart your computer. Empty the trash when done.
P.S. If you shut down your computer, the window should have disappeared. Why didn't you use Force Quit?

Installation and run problem

The previous user of my computer used jdk1.3. However, I got error message when I run the program(there is no compile error). The message is:
Error occured during initialization of VM
java/lang/NoClassDefFoundError: java/lang/Object
Hence, I tried to install jdk1.3.1 and set the new path and classpath. Unfortunately, I cannot install it. I downloaded and installed jdk1.3.1 three times as well as jdk1.4 once. I always got error message:
This self extracting executable file appears to have been corrupted and cannot be executed. You should obtain a new copy of this file to insure that it will execute correctly.
I use Windows NT 4.0. I don't know this is the problem of my machine system or the problem of installation
Please give me some suggestion!
Any help is greatly appreciated!

Well, I'd say a Windoze error, but you may try:
1. Try to uninstall Java, if it's available with the add/remove programs, and then install the new copy.
2. If it cannot work, try to locate the files of the previous install (c:\jdk1.3 is most likely, but depends on your collegue.) If you find them, remove all. Update your start menu so it won't contain anything java-related, and delete the JavaSoft subdir in your "Program files" directory. Use regedit to edit your registry. Use it with caution - you may destroy your windoze. Open HKEY_LOCAL_MACHINE, then SOFTWARE, and delete the JavaSoft key (right-click, delete). Go to the WinNT directory, and the System32 subdir. There, delete the files java*.* Now you can try again to install it. If you still unable to do so, well, try to unzip the file (winzip will open it) to a temp directory, and run setup there.
If it still cannot work, try to find another WinNT wkstation, and install the package there. It probably will succeed, so you have the only option - reinstall WinNT and all the programs.
Bad news is that I've seen this happen once, and only Windows reinstall helped. However, "inheriting" a PC from someone, well, I'd prefer to reinstall everything for sure. Ain't need no sticky files of my collegues... :-)

Installation and Run Guide?

I don't understand how Sun can build software that is at the forefront like Java is and then not support it very well. Initially a few years ago I got servlets running with Apache and Jserv. Well, now I'm trying to get everything running with the latest and find this web site appalling. There is no instructions on how to get the servlet software running anywhere that I can find on the site. Plus there are links that go nowhere! There is not even documentation to tell you where to put the compiled java code or the html code. Instead I have to experiment with the example programs. WTF! Get some people to document this stuff and make it accurate. You're only hurting Sun's chances of success which as far as I can tell from the company stock, heading south.
I've download the JSDK1.4 and J2SDKEE edition which says that it has the servlet spec 2.4 code in it. Now what? Do I do something with classpath. Is there no longer a servlet.jar file because I don't see one in the directory?
GET SOME PEOPLE THAT KNOW HOW TO DOCUMENT THE SOFTWARE BEFORE YOU GO UNDER! It's tiring working with software as it is and then to fight installation problems.

You are upgrading from apache/jserv to what? Latest apache/tomcat setup?
If so you would have better luck at thier sites to get documentation:
http://jakarta.apache.org/tomcat (tomcat)
http://httpd.apache.org (apache)
seeing that sun does not support thier product. If you have code specific questions, Sun has got you covered.
http://java.sun.com/apis.html

OCW installation and running root102.sh

Hi,
I'm trying to upgrade from ORACLE ClusterWare 10.2.0.1.0 to 10.2.0.4.0. We have two nodes and I've completed firsts steps and now i running root102.sh in each node. Can anyone help me, to solve this issue?
In first node I have this message:
[root@machine install]# ./root102.sh
The clusterware daemons are running from /dev/raw/raw1: bound to major 8, minor 1
/dev/raw/raw2: bound to major 8, minor 2
/datos/ocw/product/10.2.0. But you are patching /datos/ocw/product/10.2.0
[root@machine install]#
[root@machine install]#
[root@machine install]# /datos/ocw/product/10.2.0/bin/crsctl stop crs
Stopping resources.
Error while stopping resources. Possible cause: CRSD is down.
Stopping CSSD.
Unable to communicate with the CSS daemon.
In second node I Have this message:
[root@machine2 install]# ./root102.sh
Creating pre-patch directory for saving pre-patch clusterware files
Completed patching clusterware files to /datos/ocw/product/10.2.0
Relinking some shared libraries.
Relinking of patched files is complete.
WARNING: directory '/datos/ocw/product' is not owned by root
WARNING: directory '/datos/ocw' is not owned by root
Preparing to recopy patched init and RC scripts.
Recopying init and RC scripts.
Startup will be queued to init within 30 seconds.
Starting up the CRS daemons.
Waiting for the patched CRS daemons to start.
This may take a while on some systems.
10204 patch successfully applied.
clscfg: EXISTING configuration version 3 detected.
clscfg: version 3 is 10G Release 2.
Successfully accumulated necessary OCR keys.
Using ports: CSS=49895 CRS=49896 EVMC=49898 and EVMR=49897.
node <nodenumber>: <nodename> <private interconnect name> <hostname>
node 2: machine2 machine2-priv machine2
Creating OCR keys for user 'root', privgrp 'root'..
Operation successful.
clscfg -upgrade completed successfully
[root@machine2 install]#
Best regards.
Javier Vargas
Bogotá Colombia - South America

Hi,
Thanks for reply Vasu, finally what i've done has been modify this line in root102.sh to force ORA_CRS_HOME be equal to CLUSTERWARE_HOME and has worked.
Thanks again,
Best regards
Javier Vargas
Bogotá Colombia - South America
CLUSTERWARE_HOME=`$ID/init.crs home`
if [ "$ORA_CRS_HOME" = "$CLUSTERWARE_HOME" ];
then
$ECHO "The clusterware daemons are running from $CLUSTERWARE_HOME. But you are patching $ORA_CRS_HOME"
exit 1
fi

Pages 2 doesn't do anything after installation and run!

Just intalled iWork 06 and when I start KN3, it says the application has unexpectedly quit.
When I start Pages 2, it asks me to register, then Pages opens, but nothing happens. I see the menubar and then if I try to start a New Document, nothing happens...
if I try to open a txt doc, it says it can"t open it!
Seems iWork 06 installation is flawed..
I'm working on Tiger, latest current update, on a quicksilver G4 Dual 1ghz.
Keynote 2 still launches just fine!

I don't think that this error is the problem - looking in fnd_td_mig_cmds, it seems that the error accured in 16:07 in 4/9, but after this there were many command that succeed - when the last of them was in 17:45,
Moreover, it seems from fnd_td_mig_cmds that in 6/7 in 13:30 , a few more tables were moved, and now the migration process on 3.64% instead of 3.6%. but nothing new was written in any of the log files, and I can't find any other errors in the table or in the report.
In fnd_id_mig_cmds there are 4 rows with status that is not 'SUCCESS' - the one error mantioned above, and 3 move commands:
alter table "hr"."PER_ALL_ASSIGMENTS_F" MOVE TABLESPACE APPS_TS_TX_DATA" NOPARALLEL NOLOGGING
alter table "hr"."PAY_ELEMENT_ENTRY_VALUE_F" MOVE TABLESPACE APPS_TS_TX_DATA" NOPARALLEL NOLOGGING
alter table "hr"."PAY_ELEMENT_ENTRY_F" MOVE TABLESPACE APPS_TS_TX_DATA" NOPARALLEL NOLOGGING
As I mentioned in my previous post, there are 3 open cmd window on the server of the utility. Can it mean that the migration is just going very slow? and what is it possible to do about?I do not see any similar hits on MOS website except for (Oatm Conversion Is Hanging While Generating Migration Command [ID 445020.1]).
and yes, there are a lot of objects that weren't migrated..I checked some new tablespaces and some old, and they all have segments.I still suggest you fix the issue mentioned in your first post and do the migration again. You may also log a SR and see what Oracle support would suggest.
Thanks,
Hussein

Help: Acrobat XI English version installs and runs in Swedish.

I am a USA customer using usa English. I have downloaded the Acro XI Pro install package three times from Adobe, both after purchase (which seems to be one separate download process) and as a trial download using the Adobe download install program.. Different sites, different methods. Installed manually twicw, allowed the Adobe downloader to install twice and installed on two different computers. Eash time, the opening sequence and various other pages/windows are in Swedish, not English. During the installation process, English is chosen every time.. These Swedish screens include various web links in Swedish as well as "local" screens. I have ten screen shots of the Swedish screens. I spent 2 hours with tech support, tried a variety of fixes, including repair.modify, uninstall re-install, and uninstall and re-downlaod, install: all to no avail. WTF?
Any insights?
Windows XP Pro SP3
500 GB free on HDD
3.4GB ram.
Your help will be most appreciated.

Please try this:
1) Go to control panel - Add remove programs
2) Select Acrobat XI entry. Click "change"
3) Click "Next". Select "Modify". Click "Next".
4) Click on the plus sign for the icon "Languages".
5) Remove all the languages other than English and click "Next" and then click "Update".
Please let me know if it works or not.
Thanks,
Amish.

Installing and running a Crystal 2008 application on a Windows 7 64 bit box

I am building a small application in Visual Studio 2005 SP2 that runs Crystal Reports 2008 SP2 rpts. I create an msi file, using the Visual Studio setup project, with the CRRuntime_12_2.msm. The application installs and runs fine on an XP machine. I can install it on a WIN 7 64 bit machine, but when I try to run it from its Program Files (x86) location, I get the following error:
[beginning of quote]
An error has occurred while attempting to load the Crystal Reports runtime.
Either the Crystal Reports registry key permissions are insufficient or the Crystal Reports runtime is not installed correctly.
Please install the appropriate Crystal Reports redistributable (CRRedist*.msi) that contains the version of the Crystal Reports runtime (x86, x64 or Itanium) this is required. [Here I'm paraphasing] Please go to CR support for more information.
[end of quote]
What am I doing wrong? I should not have to install a second msi file; those files should be contained in the msm file. Right?
Thanks.

Hi, Jeff;
Make sure you have compiled your application as 32 bit, and not "any cpu".
See this document for some more info: [64|http://www.sdn.sap.com/irj/boc/index?rid=/library/uuid/10d5fa88-2013-2c10-c9a5-f11963607d4e&overridelayout=true]
Regards,
Jonathan
Follow us on Twitter u2013 http://twitter.com/SAPCRNetSup

How can I install and run a Windows program on my MacBook Pro/?

How can I install and run a Windows program on my MacBook Pro?

You have several options.
1, Use a Virtual Machine like Vmware, Parallels etc... to Create a Virtual Windows Installation and Run your program in there. A Virtual MAchine will runn in a Window on your Desktop and share your Mac's resources RAM HD space processor. Your MAc desktop will still be available while you run Windows install.
http://www.parallels.com/
2. Install Windows on a partition using Bootcamp. It will run a full installation of Windows you can boot into, and run your programs. The Mac desktop will not available until your reboot the computer and start in OSx instead of Windows.
https://www.apple.com/support/bootcamp/
3. Use Wine / Winebottler to run the Application without the need for a complete Windows installation.
http://winebottler.kronenberg.org/

Apparent mismatch installer and coreinfo

I am attempting to upgrade Win 8.0 x64 to Windows 8.1 x64 (standard editions) using iso images downloaded with my product key. I checked processor hardware compatibility when installing 8.0 and all is fine with windows 8.0. But windows 8.1 won't
install. The installer claims that the CPU doesn't support PREFETCHW instruction and aborts.
However running "coreinfo" (sysinternals) tells me another story - that prefetchw and all other CPU prerequisites ARE INDEED met by my Pentium 4. Inclined to believe this as the 64 bit Windows 8.0 runs just fine. What gives?

Hi CHEN,
Thanks for your reply. I need to be more clear...
I wrote...
*The installer claims that the CPU doesn't support PREFETCHW instruction and aborts.*
This message did indeed come from an upgrade attempt from Windows 8.0 x64 standard edition (and I had just installed that fresh (as a clean install) from iso image that I downloaded from the windows store using the upgrade assistant. Your reply might indicate
that I have some mileage in trying this approach again AFTER installing critical & important updates and turning windows firewall off temporarily.
I also wrote..
*using iso images downloaded with my product key.*
I gave up on the upgrade route and downloaded iso images instead using the Media Creation Tool to USB ISO images of Windows 8.0 and Windows 8.1 Standard x64.
Windows 8.0 installs and runs just fine using clean install from USB ISO image.
WINDOWS 8.1 install consistently fails during installation...
The following error message is flashed on the screen (captured by video)
Your PC needs to restart.
Please hold down the power button:
Error Code: 0x000000C4
Parameters:
0x0000000000000091
0x000000000000000F
0xFFFFF80212FC0A00
0X0000000000000000
BIOS offers me control over hyperthreading on/off but the setting has no influence on this behaviour.
===========
Here is what coreinfo has to say about my CPU....
Coreinfo v3.31 - Dump information on system CPU and memory topology
Copyright (C) 2008-2014 Mark Russinovich
Sysinternals -
Intel(R) Pentium(R) 4 CPU 3.00GHz
x86 Family 15 Model 4 Stepping 9, GenuineIntel
Microcode signature: 00000003
HTT             *       Hyperthreading enabled
HYPERVISOR      -       Hypervisor is present
VMX             -       Supports Intel hardware-assisted virtualization
SVM             -       Supports AMD hardware-assisted virtualization
X64             *       Supports 64-bit mode
SMX             -       Supports Intel trusted execution
SKINIT          -       Supports AMD SKINIT
NX              *       Supports no-execute page protection
SMEP            -       Supports Supervisor Mode Execution Prevention
SMAP            -       Supports Supervisor Mode Access Prevention
PAGE1GB         -       Supports 1 GB large pages
PAE             *       Supports > 32-bit physical addresses
PAT             *       Supports Page Attribute Table
PSE             *       Supports 4 MB pages
PSE36           *       Supports > 32-bit address 4 MB pages
PGE             *       Supports global bit in page tables
SS              *       Supports bus snooping for cache operations
VME             *       Supports Virtual-8086 mode
RDWRFSGSBASE    -       Supports direct GS/FS base access
FPU             *       Implements i387 floating point instructions
MMX             *       Supports MMX instruction set
MMXEXT          -       Implements AMD MMX extensions
3DNOW           -       Supports 3DNow! instructions
3DNOWEXT        -       Supports 3DNow! extension instructions
SSE             *       Supports Streaming SIMD Extensions
SSE2            *       Supports Streaming SIMD Extensions 2
SSE3            *       Supports Streaming SIMD Extensions 3
SSSE3           -       Supports Supplemental SIMD Extensions 3
SSE4a           -       Supports Streaming SIMDR Extensions 4a
SSE4.1          -       Supports Streaming SIMD Extensions 4.1
SSE4.2          -       Supports Streaming SIMD Extensions 4.2
AES             -       Supports AES extensions
AVX             -       Supports AVX intruction extensions
FMA             -       Supports FMA extensions using YMM state
MSR             *       Implements RDMSR/WRMSR instructions
MTRR            *       Supports Memory Type Range Registers
XSAVE           -       Supports XSAVE/XRSTOR instructions
OSXSAVE         -       Supports XSETBV/XGETBV instructions
RDRAND          -       Supports RDRAND instruction
RDSEED          -       Supports RDSEED instruction
CMOV            *       Supports CMOVcc instruction
CLFSH           *       Supports CLFLUSH instruction
CX8             *       Supports compare and exchange 8-byte instructions
CX16            *       Supports CMPXCHG16B instruction
BMI1            -       Supports bit manipulation extensions 1
BMI2            -       Supports bit manipulation extensions 2
ADX             -       Supports ADCX/ADOX instructions
DCA             -       Supports prefetch from memory-mapped device
F16C            -       Supports half-precision instruction
FXSR            *       Supports FXSAVE/FXSTOR instructions
FFXSR           -       Supports optimized FXSAVE/FSRSTOR instruction
MONITOR         *       Supports MONITOR and MWAIT instructions
MOVBE           -       Supports MOVBE instruction
ERMSB           -       Supports Enhanced REP MOVSB/STOSB
PCLMULDQ        -       Supports PCLMULDQ instruction
POPCNT          -       Supports POPCNT instruction
LZCNT           -       Supports LZCNT instruction
SEP             *       Supports fast system call instructions
LAHF-SAHF       *       Supports LAHF/SAHF instructions in 64-bit mode
HLE             -       Supports Hardware Lock Elision instructions
RTM             -       Supports Restricted Transactional Memory instructions
DE              *       Supports I/O breakpoints including CR4.DE
DTES64          *       Can write history of 64-bit branch addresses
DS              *       Implements memory-resident debug buffer
DS-CPL          *       Supports Debug Store feature with CPL
PCID            -       Supports PCIDs and settable CR4.PCIDE
INVPCID         -       Supports INVPCID instruction
PDCM            -       Supports Performance Capabilities MSR
RDTSCP          -       Supports RDTSCP instruction
TSC             *       Supports RDTSC instruction
TSC-DEADLINE    -       Local APIC supports one-shot deadline timer
TSC-INVARIANT   -       TSC runs at constant rate
xTPR            *       Supports disabling task priority messages
EIST            -       Supports Enhanced Intel Speedstep
ACPI            *       Implements MSR for power management
TM              *       Implements thermal monitor circuitry
TM2             -       Implements Thermal Monitor 2 control
APIC            *       Implements software-accessible local APIC
x2APIC          -       Supports x2APIC
CNXT-ID         *       L1 data cache mode adaptive or BIOS
MCE             *       Supports Machine Check, INT18 and CR4.MCE
MCA             *       Implements Machine Check Architecture
PBE             *       Supports use of FERR#/PBE# pin
PSN             -       Implements 96-bit processor serial number
PREFETCHW       -       Supports PREFETCHW instruction
Maximum implemented CPUID leaves: 00000005 (Basic), 80000008 (Extended).
Logical to Physical Processor Map:
** Physical Processor 0 (Hyperthreaded)
Logical Processor to Socket Map:
** Socket 0
Logical Processor to NUMA Node Map:
** NUMA Node 0
No NUMA nodes.
Logical Processor to Cache Map:
** Data Cache          0, Level 1,   16 KB, Assoc   8, LineSize 64
** Unified Cache       0, Level 2,    1 MB, Assoc   8, LineSize 128
Logical Processor to Group Map:
** Group 0

When I try to install ios lion the installer says my hard drive has SMART errors and that I need to buy a new Hard Drive, but my computer witch has snowleprd and runs just fine

When I try to install ios lion the installer says my hard drive has SMART errors and that I need to buy a new Hard Drive, but my computer witch has snowleprd and runs just fine.

SMART is a technology that monitors the drive for signs of impending failure. You can verify that SMART is indicating a problem in Disk Utility. Select the hard drive and look at the bottom of the window. It should look like this:
If the SMART status is not "Verified" then you should back up your drive and start shopping for a new one.

LR2 - MacOS: installation and/or running from USB stick

I am user of LR2
I wonder if it is possible:
1) to copy the installation CD to an USB drive and start installation from there (MacBook Air)
2) to install LR2 onto USB drive and run from the memory stick (USB)
3) allowed to install 1x on iMac at home and install 1x on laptop computer (Macbook Air) for use when not home
Thanks for your feedbacks and (if available) links to further resources in above topics!
Daniel

As to #1, why don't you just download a fresh copy of 2.7 from the Adobe web site onto your MacBook? That would save you a bunch of figuring out how to create a USB stick to install from. Load it from here
I suspect Ian is right about #2, that you won't be able to do it.
#3: no problem. You're allowed two installed copies--you aren't supposed to run them at the same time.
Hal

Installation and run

Similar Messages

Maybe you are looking for